view Makefile @ 23978:ef6e50c3c172

Revert setting audio output channel count for FFmpeg The FFmpeg API needs to be fixed before this can be done sanely. ffdca wants the desired output channel count to be set in avctx->channels. Unfortunately it also completely fails if the requested number of channels is not available rather than returning a different amount (if 6 channels are requested we'd probably rather use stereo than fail completely). ffvorbis ignores caller-set values in avctx->channels. It writes the channel count there once during init. This means the caller can only set the count before init because later there would be no indication whether the channel count in avctx reflects real output. ffwma requires the caller to supply the encoded channel count in avctx->channels during init or it fails. So it is not possible to set a different number of desired output channels there before init either.

# LINUX Makefile made by A'rpi / Astral
# Some cleanup by LGB: 	* 'make -C dir' instead of 'cd dir;make;cd..'
#			* for loops instead of linear sequence of make directories
#			* some minor problems with make clean and distclean were corrected
#			* DVD support

include config.mak

COMMON_LDFLAGS += $(EXTRA_LIB)\
                  $(EXTRALIBS) \

LDFLAGS_MPLAYER = $(EXTRALIBS_MPLAYER) \
                  $(COMMON_LDFLAGS) \

LDFLAGS_MENCODER = $(EXTRALIBS_MENCODER) \
                   $(COMMON_LDFLAGS) \

SRCS_COMMON = asxparser.c \
              codec-cfg.c \
              cpudetect.c \
              edl.c \
              find_sub.c \
              m_config.c \
              m_option.c \
              m_struct.c \
              mpcommon.c \
              parser-cfg.c \
              playtree.c \
              playtreeparser.c \
              spudec.c \
              sub_cc.c \
              subreader.c \
              vobsub.c \

SRCS_COMMON-$(UNRARLIB) += unrarlib.c

SRCS_MPLAYER = mplayer.c \
               m_property.c \
               mp_fifo.c \
               mp_msg.c \
               mixer.c \
               parser-mpcmd.c \
               subopt-helper.c \
               command.c \

SRCS_MENCODER = mencoder.c \
                mp_msg-mencoder.c \
                parser-mecmd.c \
                xvid_vbr.c \

COMMON_LIBS = libmpcodecs/libmpcodecs.a \
              libaf/libaf.a \
              libmpdemux/libmpdemux.a \
              stream/stream.a \
              libswscale/libswscale.a \
              libvo/libosd.a \

COMMON_LIBS-$(LIBAVFORMAT_A)      += libavformat/libavformat.a
COMMON_LIBS-$(LIBAVCODEC_A)       += libavcodec/libavcodec.a
COMMON_LIBS-$(LIBAVUTIL_A)        += libavutil/libavutil.a
COMMON_LIBS-$(LIBPOSTPROC_A)      += libpostproc/libpostproc.a
COMMON_LIBS-$(WIN32DLL)           += loader/libloader.a
COMMON_LIBS-$(MP3LIB)             += mp3lib/libmp3.a
COMMON_LIBS-$(LIBA52)             += liba52/liba52.a
COMMON_LIBS-$(LIBMPEG2)           += libmpeg2/libmpeg2.a
COMMON_LIBS-$(FAAD_INTERNAL)      += libfaad2/libfaad2.a
COMMON_LIBS-$(TREMOR_INTERNAL)    += tremor/libvorbisidec.a
COMMON_LIBS-$(DVDREAD_INTERNAL)   += dvdread/libdvdread.a
COMMON_LIBS-$(DVDCSS_INTERNAL)    += libdvdcss/libdvdcss.a
COMMON_LIBS-$(ASS)                += libass/libass.a

LIBS_MPLAYER = libvo/libvo.a \
               libao2/libao2.a \
               input/libinput.a \

LIBS_MPLAYER-$(VIDIX)             += vidix/libvidix.a
LIBS_MPLAYER-$(GUI)               += gui/libgui.a
LIBS_MPLAYER-$(LIBMENU)           += libmenu/libmenu.a

LIBS_MENCODER = libmpcodecs/libmpencoders.a \
                libmpdemux/libmpmux.a \

# Having this in libosdep.a is not enough.
OBJS_MPLAYER-$(TARGET_WIN32) += osdep/mplayer-rc.o

ALL_PRG-$(MPLAYER)  += mplayer$(EXESUF)
ALL_PRG-$(MENCODER) += mencoder$(EXESUF)

COMMON_LIBS  += $(COMMON_LIBS-yes)
LIBS_MPLAYER += $(LIBS_MPLAYER-yes)
OBJS_MPLAYER += $(OBJS_MPLAYER-yes)
PARTS        += $(PARTS-yes)
ALL_PRG      += $(ALL_PRG-yes)

COMMON_LIBS += osdep/libosdep.a

MPLAYER_DEPS  = $(OBJS_MPLAYER)  $(OBJS_COMMON) $(LIBS_MPLAYER)  $(COMMON_LIBS)
MENCODER_DEPS = $(OBJS_MENCODER) $(OBJS_COMMON) $(LIBS_MENCODER) $(COMMON_LIBS)

INSTALL_TARGETS-$(MPLAYER)  += install-mplayer  install-mplayer-man
INSTALL_TARGETS-$(MENCODER) += install-mencoder install-mplayer-man
INSTALL_TARGETS-$(GUI)      += install-gui
INSTALL_TARGETS             += $(INSTALL_TARGETS-yes)

PARTS = dvdread \
        gui \
        input \
        liba52 \
        libaf \
        libao2 \
        libass \
        libavcodec \
        libavformat \
        libavutil \
        libdvdcss \
        libfaad2 \
        libmenu \
        libmpcodecs \
        libmpdemux \
        libmpeg2 \
        libpostproc \
        libswscale \
        libvo \
        loader \
        mp3lib \
        osdep \
        stream \
        tremor \
        vidix \


all:	$(ALL_PRG)

dep depend:: help_mp.h version.h codecs.conf.h
	@for a in $(PARTS); do $(MAKE) -C $$a dep; done

include mpcommon.mak

CFLAGS := $(subst -I..,-I.,$(CFLAGS))

libaf/libaf.a:
	$(MAKE) -C libaf

dvdread/libdvdread.a:
	$(MAKE) -C dvdread

libdvdcss/libdvdcss.a:
	$(MAKE) -C libdvdcss

loader/libloader.a:
	$(MAKE) -C loader

libass/libass.a:
	$(MAKE) -C libass

libmpdemux/libmpdemux.a:
	$(MAKE) -C libmpdemux libmpdemux.a

libmpdemux/libmpmux.a:
	$(MAKE) -C libmpdemux libmpmux.a

stream/stream.a:
	$(MAKE) -C stream

libmpcodecs/libmpcodecs.a:
	$(MAKE) -C libmpcodecs

libavutil/libavutil.a:
	$(MAKE) -C libavutil

libavcodec/libavcodec.a:
	$(MAKE) -C libavcodec

libpostproc/libpostproc.a:
	$(MAKE) -C libpostproc

libavformat/libavformat.a:
	$(MAKE) -C libavformat

libswscale/libswscale.a:
	$(MAKE) -C libswscale

libmpeg2/libmpeg2.a:
	$(MAKE) -C libmpeg2

libvo/libvo.a:
	$(MAKE) -C libvo libvo.a

libvo/libosd.a:
	$(MAKE) -C libvo libosd.a

libao2/libao2.a:
	$(MAKE) -C libao2

liba52/liba52.a:
	$(MAKE) -C liba52

libfaad2/libfaad2.a:
	$(MAKE) -C libfaad2

mp3lib/libmp3.a:
	$(MAKE) -C mp3lib

tremor/libvorbisidec.a:
	$(MAKE) -C tremor

vidix/libvidix.a:
	$(MAKE) -C vidix

gui/libgui.a:
	$(MAKE) -C gui

osdep/libosdep.a:
	$(MAKE) -C osdep

osdep/mplayer-rc.o: version.h
	$(MAKE) -C osdep mplayer-rc.o

input/libinput.a:
	$(MAKE) -C input

libmenu/libmenu.a:
	$(MAKE) -C libmenu

mplayer$(EXESUF): $(MPLAYER_DEPS)
	$(CC) -o $@ $^ $(LDFLAGS_MPLAYER)

mencoder$(EXESUF): $(MENCODER_DEPS)
	$(CC) -o $@ $^ $(LDFLAGS_MENCODER)

codec-cfg$(EXESUF): codec-cfg.c codec-cfg.h help_mp.h
	$(HOST_CC) -I. -DCODECS2HTML $< -o $@

codecs.conf.h: codec-cfg$(EXESUF) etc/codecs.conf
	./codec-cfg$(EXESUF) ./etc/codecs.conf > $@

codec-cfg.o: codecs.conf.h

codecs2html$(EXESUF): mp_msg.o
	$(CC) -DCODECS2HTML codec-cfg.c $^ -o $@

codec-cfg-test$(EXESUF): codecs.conf.h codec-cfg.h mp_msg.o osdep/getch2.o
	$(CC) -I. -DTESTING codec-cfg.c mp_msg.o osdep/getch2.o -ltermcap -o $@

install: install-dirs $(INSTALL_TARGETS)

install-dirs:
	$(INSTALL) -d $(BINDIR)
	$(INSTALL) -d $(DATADIR)
	$(INSTALL) -d $(MANDIR)/man1
	$(INSTALL) -d $(CONFDIR)
	if test -f $(CONFDIR)/codecs.conf ; then mv -f $(CONFDIR)/codecs.conf $(CONFDIR)/codecs.conf.old ; fi

install-mplayer: mplayer$(EXESUF)
	$(INSTALL) -m 755 $(INSTALLSTRIP) mplayer$(EXESUF) $(BINDIR)

install-mplayer-man:
	for i in $(MAN_LANG); do \
		if test "$$i" = en ; then \
			$(INSTALL) -c -m 644 DOCS/man/en/mplayer.1 $(MANDIR)/man1/ ; \
		else \
			$(INSTALL) -d $(MANDIR)/$$i/man1 ; \
			$(INSTALL) -c -m 644 DOCS/man/$$i/mplayer.1 $(MANDIR)/$$i/man1/ ; \
		fi ; \
	done

install-mencoder: mencoder$(EXESUF)
	$(INSTALL) -m 755 $(INSTALLSTRIP) mencoder$(EXESUF) $(BINDIR)
	for i in $(MAN_LANG); do \
		if test "$$i" = en ; then \
			cd $(MANDIR)/man1 && ln -sf mplayer.1 mencoder.1 ; \
		else \
			cd $(MANDIR)/$$i/man1 && ln -sf mplayer.1 mencoder.1 ; \
		fi ; \
	done

install-gui:
	-ln -sf mplayer$(EXESUF) $(BINDIR)/gmplayer$(EXESUF)
	$(INSTALL) -d $(DATADIR)/skins
	@echo "*** Download skin(s) at http://www.mplayerhq.hu/design7/dload.html"
	@echo "*** for GUI, and extract to $(DATADIR)/skins/"
	$(INSTALL) -d $(prefix)/share/pixmaps
	$(INSTALL) -m 644 etc/mplayer.xpm $(prefix)/share/pixmaps/
	$(INSTALL) -d $(prefix)/share/applications
	$(INSTALL) -m 644 etc/mplayer.desktop $(prefix)/share/applications/

uninstall:
	-rm -f $(BINDIR)/mplayer$(EXESUF) $(BINDIR)/gmplayer$(EXESUF)
	-rm -f $(BINDIR)/mencoder$(EXESUF)
	-rm -f $(MANDIR)/man1/mencoder.1 $(MANDIR)/man1/mplayer.1
	-rm -f $(prefix)/share/pixmaps/mplayer.xpm
	-rm -f $(prefix)/share/applications/mplayer.desktop
	for l in $(MAN_LANG); do \
	  if test "$$l" != "en"; then \
	    rm -f $(MANDIR)/$$l/man1/mplayer.1    \
	          $(MANDIR)/$$l/man1/mencoder.1   \
	          $(MANDIR)/$$l/man1/gmplayer.1 ; \
	  fi ; \
	done

clean::
	-rm -f mplayer$(EXESUF) mencoder$(EXESUF) codec-cfg$(EXESUF) \
	  codecs2html$(EXESUF) codec-cfg-test$(EXESUF) cpuinfo$(EXESUF) \
	  codecs.conf.h help_mp.h version.h
	@for a in $(PARTS); do $(MAKE) -C $$a clean; done

distclean:: doxygen_clean
	@for a in $(PARTS); do $(MAKE) -C $$a distclean; done
	$(MAKE) -C TOOLS distclean
	-rm -f configure.log config.mak config.h

strip:
	strip -s $(ALL_PRG)

# ./configure must be rerun if it changed
config.h: configure
	@echo "############################################################"
	@echo "####### Please run ./configure again - it's changed! #######"
	@echo "############################################################"

# rebuild at every config.h/config.mak/Makefile change:
version.h: config.h config.mak Makefile
	./version.sh `$(CC) -dumpversion`

doxygen:
	doxygen DOCS/tech/Doxyfile

doxygen_clean:
	-rm -rf DOCS/tech/doxygen

help_mp.h: help/help_mp-en.h $(HELP_FILE)
	@echo '// WARNING! This is a generated file. Do NOT edit.' > help_mp.h
	@echo '// See the help/ subdir for the editable files.' >> help_mp.h
ifeq ($(CHARSET),)
	@echo '#include "$(HELP_FILE)"' >> help_mp.h
else
	iconv -f UTF-8 -t $(CHARSET) "$(HELP_FILE)" >> help_mp.h
endif

ifneq ($(HELP_FILE),help/help_mp-en.h)
	@echo "Adding untranslated messages to help_mp.h"
	@echo '// untranslated messages from the English master file:' >> help_mp.h
	@help/help_diff.sh $(HELP_FILE) < help/help_mp-en.h >> help_mp.h
endif

# explicit dependencies to force version.h to be built even if .depend is missing
mplayer.o mencoder.o vobsub.o: version.h

# temporary measure to make sure help_mp.h is built. we desperately need correct deps!
$(MPLAYER_DEPS) $(MENCODER_DEPS): help_mp.h

#
# the following lines provide _partial_ dependency information
# for the 'library' directories under main dir, in order to cause
# the build process to recursively descend into them if something
# has changed. ideally this will be replaced with a single
# nonrecursive makefile for the whole project.
#
# Now all directories are recursed by default because these rules do not
# consider dependencies on files in other directories, while the recursively
# invoked Makefiles do. Conditional recursion only to the directories with
# changed files can be enabled by creating a file named ".norecurse" and
# optionally giving it a timestamp in the past. Directories whose .a files
# are newer than the timestamp and newer than other files in the directory
# will not be recursed.
.norecurse:

libvo/libvo.a: .norecurse $(wildcard libvo/*.[ch])
libvo/libosd.a: .norecurse $(wildcard libvo/*.[ch])
libao2/libao2.a: .norecurse $(wildcard libao2/*.[ch])
osdep/libosdep.a: .norecurse $(wildcard osdep/*.[ch])
input/libinput.a: .norecurse $(wildcard input/*.[ch])

libmenu/libmenu.a: .norecurse $(wildcard libmenu/*.[ch])
libaf/libaf.a: .norecurse $(wildcard libaf/*.[ch])
dvdread/libdvdread.a: .norecurse $(wildcard dvdread/*.[ch])
libdvdcss/libdvdcss.a: .norecurse $(wildcard libdvdcss/*.[ch])

libmpdemux/libmpdemux.a: .norecurse $(wildcard libmpdemux/*.[ch])
libmpdemux/libmpmux.a: .norecurse $(wildcard libmpdemux/*.[ch])
stream/stream.a: .norecurse $(wildcard stream/*.[ch] stream/*/*.[ch])
libmpcodecs/libmpcodecs.a: .norecurse $(wildcard libmpcodecs/*.[ch]) $(wildcard libmpcodecs/native/*.[ch])
libmpcodecs/libmpencoders.a: .norecurse $(wildcard libmpcodecs/*.[ch])

libavutil/libavutil.a: .norecurse $(wildcard libavutil/*.[ch])
libavcodec/libavcodec.a: .norecurse $(wildcard libavcodec/*.[ch] libavcodec/*/*.[chS])
libavformat/libavformat.a: .norecurse $(wildcard libavformat/*.[ch])
libswscale/libswscale.a: .norecurse $(wildcard libswscale/*.[ch])

libmpeg2/libmpeg2.a: .norecurse $(wildcard libmpeg2/*.[ch])
liba52/liba52.a: .norecurse $(wildcard liba52/*.[ch])
mp3lib/libmp3.a: .norecurse $(wildcard mp3lib/*.[ch])
libfaad2/libfaad2.a: .norecurse $(wildcard libfaad2/*.[ch] libfaad2/*/*.[ch])

loader/libloader.a: .norecurse $(wildcard loader/*.[chSs])
vidix/libvidix.a: .norecurse $(wildcard vidix/*.[ch])
gui/libgui.a: .norecurse $(wildcard gui/*.[ch] gui/*/*.[ch] gui/*/*/*.[ch])

libass/libass.a: .norecurse $(wildcard libass/*.[ch])

.PHONY: all install* uninstall strip doxygen doxygen_clean