# HG changeset patch # User rik # Date 1013529780 0 # Node ID 1479eb74322f2105b92338d419e72206e07a453c # Parent 176046e35fb25a15b0fa2816459738640b530f5d this file is obsoleted by videodev_mjpeg.h diff -r 176046e35fb2 -r 1479eb74322f libvo/zoran.h --- a/libvo/zoran.h Tue Feb 12 15:59:32 2002 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,372 +0,0 @@ -/* - zoran - Iomega Buz driver - - Copyright (C) 1999 Rainer Johanni - - based on - - zoran.0.0.3 Copyright (C) 1998 Dave Perks - - and - - bttv - Bt848 frame grabber driver - Copyright (C) 1996,97 Ralph Metzler (rjkm@thp.uni-koeln.de) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _BUZ_H_ -#define _BUZ_H_ - -#include - -#if LINUX_VERSION_CODE < 0x20212 -typedef struct wait_queue *wait_queue_head_t; -#endif - -/* The Buz only supports a maximum width of 720, but some V4L - applications (e.g. xawtv are more happy with 768). - If XAWTV_HACK is defined, we try to fake a device with bigger width */ - -//#define XAWTV_HACK - -//#ifdef XAWTV_HACK -//#define BUZ_MAX_WIDTH 768 /* never display more than 768 pixels */ -#define BUZ_MAX_WIDTH (zr->timing->Wa) -//#else -//#define BUZ_MAX_WIDTH 720 /* never display more than 720 pixels */ -//#endif -//#define BUZ_MAX_HEIGHT 576 /* never display more than 576 rows */ -#define BUZ_MAX_HEIGHT (zr->timing->Ha) -#define BUZ_MIN_WIDTH 32 /* never display less than 32 pixels */ -#define BUZ_MIN_HEIGHT 24 /* never display less than 24 rows */ - -struct zoran_requestbuffers { - unsigned long count; /* Number of buffers for MJPEG grabbing */ - unsigned long size; /* Size PER BUFFER in bytes */ -}; - -struct zoran_sync { - unsigned long frame; /* number of buffer that has been free'd */ - unsigned long length; /* number of code bytes in buffer (capture only) */ - unsigned long seq; /* frame sequence number */ - struct timeval timestamp; /* timestamp */ -}; - -struct zoran_status { - int input; /* Input channel, has to be set prior to BUZIOC_G_STATUS */ - int signal; /* Returned: 1 if valid video signal detected */ - int norm; /* Returned: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */ - int color; /* Returned: 1 if color signal detected */ -}; - -struct zoran_params { - - /* The following parameters can only be queried */ - - int major_version; /* Major version number of driver */ - int minor_version; /* Minor version number of driver */ - - /* Main control parameters */ - - int input; /* Input channel: 0 = Composite, 1 = S-VHS */ - int norm; /* Norm: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */ - int decimation; /* decimation of captured video, - enlargement of video played back. - Valid values are 1, 2, 4 or 0. - 0 is a special value where the user - has full control over video scaling */ - - /* The following parameters only have to be set if decimation==0, - for other values of decimation they provide the data how the image is captured */ - - int HorDcm; /* Horizontal decimation: 1, 2 or 4 */ - int VerDcm; /* Vertical decimation: 1 or 2 */ - int TmpDcm; /* Temporal decimation: 1 or 2, - if TmpDcm==2 in capture every second frame is dropped, - in playback every frame is played twice */ - int field_per_buff; /* Number of fields per buffer: 1 or 2 */ - int img_x; /* start of image in x direction */ - int img_y; /* start of image in y direction */ - int img_width; /* image width BEFORE decimation, - must be a multiple of HorDcm*16 */ - int img_height; /* image height BEFORE decimation, - must be a multiple of VerDcm*8 */ - - /* --- End of parameters for decimation==0 only --- */ - - /* JPEG control parameters */ - - int quality; /* Measure for quality of compressed images. - Scales linearly with the size of the compressed images. - Must be beetween 0 and 100, 100 is a compression - ratio of 1:4 */ - - int odd_even; /* Which field should come first ??? */ - - int APPn; /* Number of APP segment to be written, must be 0..15 */ - int APP_len; /* Length of data in JPEG APPn segment */ - char APP_data[60]; /* Data in the JPEG APPn segment. */ - - int COM_len; /* Length of data in JPEG COM segment */ - char COM_data[60]; /* Data in JPEG COM segment */ - - unsigned long jpeg_markers; /* Which markers should go into the JPEG output. - Unless you exactly know what you do, leave them untouched. - Inluding less markers will make the resulting code - smaller, but there will be fewer aplications - which can read it. - The presence of the APP and COM marker is - influenced by APP0_len and COM_len ONLY! */ -#define JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ -#define JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ -#define JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ -#define JPEG_MARKER_COM (1<<6) /* Comment segment */ -#define JPEG_MARKER_APP (1<<7) /* App segment, driver will allways use APP0 */ - - int VFIFO_FB; /* Flag for enabling Video Fifo Feedback. - If this flag is turned on and JPEG decompressing - is going to the screen, the decompress process - is stopped every time the Video Fifo is full. - This enables a smooth decompress to the screen - but the video output signal will get scrambled */ - - /* Misc */ - - char reserved[312]; /* Makes 512 bytes for this structure */ -}; - -/* -Private IOCTL to set up for displaying MJPEG -*/ -#define BUZIOC_G_PARAMS _IOR ('v', BASE_VIDIOCPRIVATE+0, struct zoran_params) -#define BUZIOC_S_PARAMS _IOWR('v', BASE_VIDIOCPRIVATE+1, struct zoran_params) -#define BUZIOC_REQBUFS _IOWR('v', BASE_VIDIOCPRIVATE+2, struct zoran_requestbuffers) -#define BUZIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOCPRIVATE+3, int) -#define BUZIOC_QBUF_PLAY _IOW ('v', BASE_VIDIOCPRIVATE+4, int) -#define BUZIOC_SYNC _IOR ('v', BASE_VIDIOCPRIVATE+5, struct zoran_sync) -#define BUZIOC_G_STATUS _IOWR('v', BASE_VIDIOCPRIVATE+6, struct zoran_status) - - -#ifdef __KERNEL__ - -#define BUZ_NUM_STAT_COM 4 -#define BUZ_MASK_STAT_COM 3 - -#define BUZ_MAX_FRAME 256 /* Must be a power of 2 */ -#define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */ - -#if VIDEO_MAX_FRAME <= 32 -# define V4L_MAX_FRAME 32 -#elif VIDEO_MAX_FRAME <= 64 -# define V4L_MAX_FRAME 64 -#else -# error "Too many video frame buffers to handle" -#endif -#define V4L_MASK_FRAME (V4L_MAX_FRAME - 1) - - -#include "zr36057.h" - -enum card_type { - UNKNOWN = 0, - DC10, - DC10plus, - LML33, - BUZ -}; - -enum zoran_codec_mode { - BUZ_MODE_IDLE, /* nothing going on */ - BUZ_MODE_MOTION_COMPRESS, /* grabbing frames */ - BUZ_MODE_MOTION_DECOMPRESS, /* playing frames */ - BUZ_MODE_STILL_COMPRESS, /* still frame conversion */ - BUZ_MODE_STILL_DECOMPRESS /* still frame conversion */ -}; - -enum zoran_buffer_state { - BUZ_STATE_USER, /* buffer is owned by application */ - BUZ_STATE_PEND, /* buffer is queued in pend[] ready to feed to I/O */ - BUZ_STATE_DMA, /* buffer is queued in dma[] for I/O */ - BUZ_STATE_DONE /* buffer is ready to return to application */ -}; - -struct zoran_gbuffer { - u32 *frag_tab; /* addresses of frag table */ - u32 frag_tab_bus; /* same value cached to save time in ISR */ - enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ - struct zoran_sync bs; /* DONE: info to return to application */ -}; - -struct v4l_gbuffer { - char *fbuffer; /* virtual address of frame buffer */ - unsigned long fbuffer_phys; /* physical address of frame buffer */ - unsigned long fbuffer_bus; /* bus address of frame buffer */ - enum zoran_buffer_state state; /* state: unused/pending/done */ -}; - -struct tvnorm { - u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart; -}; - -struct zoran { - struct video_device video_dev; - struct i2c_bus i2c; - - int initialized; /* flag if zoran has been correctly initalized */ - int user; /* number of current users (0 or 1) */ - enum card_type card; - struct tvnorm *timing; - - unsigned short id; /* number of this device */ - char name[32]; /* name of this device */ - struct pci_dev *pci_dev; /* PCI device */ - unsigned char revision; /* revision of zr36057 */ - unsigned int zr36057_adr; /* bus address of IO mem returned by PCI BIOS */ - unsigned char *zr36057_mem; /* pointer to mapped IO memory */ - - int map_mjpeg_buffers; /* Flag which bufferset will map by next mmap() */ - - spinlock_t lock; /* Spinlock irq and hardware */ - struct semaphore sem; /* Guard parallel ioctls and mmap */ - - /* Video for Linux parameters */ - - struct video_picture picture; /* Current picture params */ - struct video_buffer buffer; /* Current buffer params */ - struct video_window window; /* Current window params */ - int buffer_set, window_set; /* Flags if the above structures are set */ - int video_interlace; /* Image on screen is interlaced */ - - u32 *overlay_mask; - wait_queue_head_t v4l_capq; - - int v4l_overlay_active; /* Overlay grab is activated */ - int v4l_memgrab_active; /* Memory grab is activated */ - - int v4l_grab_frame; /* Frame number being currently grabbed */ -#define NO_GRAB_ACTIVE (-1) - int v4l_grab_seq; /* Number of frames grabbed */ - int gwidth; /* Width of current memory capture */ - int gheight; /* Height of current memory capture */ - int gformat; /* Format of ... */ - int gbpl; /* byte per line of ... */ - - /* V4L grab queue of frames pending */ - - unsigned v4l_pend_head; - unsigned v4l_pend_tail; - int v4l_pend[V4L_MAX_FRAME]; - - struct v4l_gbuffer v4l_gbuf[VIDEO_MAX_FRAME]; /* V4L buffers' info */ - - /* Buz MJPEG parameters */ - - unsigned long jpg_nbufs; /* Number of buffers */ - unsigned long jpg_bufsize; /* Size of mjpeg buffers in bytes */ - int jpg_buffers_allocated; /* Flag if buffers are allocated */ - int need_contiguous; /* Flag if contiguous buffers are needed */ - - enum zoran_codec_mode codec_mode; /* status of codec */ - struct zoran_params params; /* structure with a lot of things to play with */ - - wait_queue_head_t jpg_capq; /* wait here for grab to finish */ - - /* grab queue counts/indices, mask with BUZ_MASK_STAT_COM before using as index */ - /* (dma_head - dma_tail) is number active in DMA, must be <= BUZ_NUM_STAT_COM */ - /* (value & BUZ_MASK_STAT_COM) corresponds to index in stat_com table */ - unsigned long jpg_que_head; /* Index where to put next buffer which is queued */ - unsigned long jpg_dma_head; /* Index of next buffer which goes into stat_com */ - unsigned long jpg_dma_tail; /* Index of last buffer in stat_com */ - unsigned long jpg_que_tail; /* Index of last buffer in queue */ - unsigned long jpg_seq_num; /* count of frames since grab/play started */ - unsigned long jpg_err_seq; /* last seq_num before error */ - unsigned long jpg_err_shift; - unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ - - /* zr36057's code buffer table */ - u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ - - /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ - int jpg_pend[BUZ_MAX_FRAME]; - - /* array indexed by frame number */ - struct zoran_gbuffer jpg_gbuf[BUZ_MAX_FRAME]; /* MJPEG buffers' info */ - - /* Additional stuff for testing */ - struct proc_dir_entry *zoran_proc; - - int testing; - int jpeg_error; - int intr_counter_GIRQ1; - int intr_counter_GIRQ0; - int intr_counter_CodRepIRQ; - int intr_counter_JPEGRepIRQ; - int field_counter; - int IRQ1_in; - int IRQ1_out; - int JPEG_in; - int JPEG_out; - int JPEG_0; - int JPEG_1; - int END_event_missed; - int JPEG_missed; - int JPEG_error; - int num_errors; - int JPEG_max_missed; - int JPEG_min_missed; - - u32 last_isr; - unsigned long frame_num; - - wait_queue_head_t test_q; -}; - -#endif - -/*The following should be done in more portable way. It depends on define - of _ALPHA_BUZ in the Makefile.*/ - -#ifdef _ALPHA_BUZ -#define btwrite(dat,adr) writel((dat),(char *) (zr->zr36057_adr+(adr))) -#define btread(adr) readl(zr->zr36057_adr+(adr)) -#else -#define btwrite(dat,adr) writel((dat), (char *) (zr->zr36057_mem+(adr))) -#define btread(adr) readl(zr->zr36057_mem+(adr)) -#endif - -#define btand(dat,adr) btwrite((dat) & btread(adr), adr) -#define btor(dat,adr) btwrite((dat) | btread(adr), adr) -#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr) - -#define I2C_TSA5522 0xc2 -#define I2C_TDA9850 0xb6 -#define I2C_HAUPEE 0xa0 -#define I2C_STBEE 0xae -#define I2C_SAA7111 0x48 -#define I2C_SAA7110 0x9c -#define I2C_SAA7185 0x88 -//#define I2C_ADV7175 0xd4 -#define I2C_ADV7175 0x54 - -#define TDA9850_CON1 0x04 -#define TDA9850_CON2 0x05 -#define TDA9850_CON3 0x06 -#define TDA9850_CON4 0x07 -#define TDA9850_ALI1 0x08 -#define TDA9850_ALI2 0x09 -#define TDA9850_ALI3 0x0a - -#endif