# HG changeset patch # User arpi # Date 1030057431 0 # Node ID 21e1ab99cb210d95ec4a916153b2602e981d3923 # Parent 6c2d746b17bfdec7abd3c9d8f61a1fef2e28cb3a General Timing Formula algorithm from a scratch. vo_vesa.c so now adjust the timing to highest possible refresh rate using the monitor capabilities from a config file. patch by Rudolf Marek diff -r 6c2d746b17bf -r 21e1ab99cb21 cfg-mplayer.h --- a/cfg-mplayer.h Thu Aug 22 21:30:31 2002 +0000 +++ b/cfg-mplayer.h Thu Aug 22 23:03:51 2002 +0000 @@ -6,13 +6,16 @@ extern int use_stdin; +#if defined(HAVE_FBDEV)||defined(HAVE_VESA) +extern char *monitor_hfreq_str; +extern char *monitor_vfreq_str; +extern char *monitor_dotclock_str; +#endif + #ifdef HAVE_FBDEV extern char *fb_dev_name; extern char *fb_mode_cfgfile; extern char *fb_mode_name; -extern char *monitor_hfreq_str; -extern char *monitor_vfreq_str; -extern char *monitor_dotclock_str; #else #ifdef HAVE_DIRECTFB extern char *fb_dev_name; diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/Makefile --- a/libvo/Makefile Thu Aug 22 21:30:31 2002 +0000 +++ b/libvo/Makefile Thu Aug 22 23:03:51 2002 +0000 @@ -3,7 +3,7 @@ LIBNAME = libvo.a -SRCS=aspect.c aclib.c osd.c font_load.c spuenc.c video_out.c vo_null.c vo_pgm.c vo_md5.c vo_mpegpes.c vo_yuv4mpeg.c $(OPTIONAL_SRCS) sub.c +SRCS=aspect.c aclib.c osd.c font_load.c gtf.c spuenc.c video_out.c vo_null.c vo_pgm.c vo_md5.c vo_mpegpes.c vo_yuv4mpeg.c $(OPTIONAL_SRCS) sub.c OBJS=$(SRCS:.c=.o) ifeq ($(VIDIX),yes) diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/gtf.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libvo/gtf.c Thu Aug 22 23:03:51 2002 +0000 @@ -0,0 +1,297 @@ +/* + * Copyright (C) Rudolf Marek - Aug 2002 + * + * You can redistribute this file under terms and conditions + * of GNU General Public licence v2. + * + * GTF calculations formulas are taken from GTF_V1R1.xls + * created by ANDY.MORRISH@NSC.COM + */ + +//Version 0.4 +#include +#include +#include +#include "gtf.h" + +#undef GTF_DEBUG + +#ifdef GTF_DEBUG +#define DEBUG_PRINTF(a,b) printf(a,b); +#else +#define DEBUG_PRINTF(a,b) +#endif + +static GTF_constants GTF_given_constants = { 3.0,550.0,1,8,1.8,8,40,20,128,600 }; + +static double round(double v) +{ + return floor(v + 0.5); +} + +static void GetRoundedConstants(GTF_constants *c) + { + c->Vsync_need = round(GTF_given_constants.Vsync_need); + c->min_Vsync_BP = GTF_given_constants.min_Vsync_BP; + c->min_front_porch = round(GTF_given_constants.min_front_porch); + c->char_cell_granularity = GTF_given_constants.char_cell_granularity; + c->margin_width = GTF_given_constants.margin_width; + c->sync_width = GTF_given_constants.sync_width; + c->c = ((GTF_given_constants.c - GTF_given_constants.j)*(GTF_given_constants.k / 256)) + GTF_given_constants.j; + c->j = GTF_given_constants.j; + c->k = GTF_given_constants.k; + c->m = (GTF_given_constants.k / 256) * GTF_given_constants.m; + } + +void GTF_calcTimings(double X,double Y,double freq, int type, + int want_margins, int want_interlace,struct VesaCRTCInfoBlock *result ) +{ + GTF_constants c; + double RR, margin_top, margin_bottom, margin_left, margin_right; + double estimated_H_period,sync_plus_BP,BP,interlace,V_total_lines_field; + double estimated_V_field_rate,actual_H_period,actual_V_field_freq; + double total_active_pixels, ideal_duty_cycle, blanking_time, H_total_pixels; + double H_freq, pixel_freq,actual_V_frame_freq; + double H_sync_start, H_sync_end, H_back_porch, H_front_porch, H_sync_width; + double V_back_porch, V_front_porch, V_sync_start, V_sync_end,V_sync_width; + double ideal_H_period; + GetRoundedConstants(&c); + + + pixel_freq = RR = freq; + + /* DETERMINE IF 1/2 LINE INTERLACE IS PRESENT */ + + interlace = 0; + + if (want_interlace) { + RR = RR * 2; + Y=Y/2; + interlace = 0.5; + } + + result->Flags = 0; + + if ((Y==300)||(Y==200)||(Y==240)) + { + Y*=2; + result->Flags = VESA_CRTC_DOUBLESCAN; /* TODO: check if mode support */ + } + + /* DETERMINE NUMBER OF LINES IN V MARGIN */ + /* DETERMINE NUMBER OF PIXELS IN H MARGIN [pixels] */ + + margin_left = margin_right = 0; + margin_top = margin_bottom = 0; + + if (want_margins) { + margin_top = margin_bottom = (c.margin_width / 100) * Y; + margin_left = round(( X* c.margin_width/100)/c.char_cell_granularity) \ + * c.char_cell_granularity; + margin_right = margin_left; + DEBUG_PRINTF("margin_left_right : %f\n",margin_right) + DEBUG_PRINTF("margin_top_bottom : %f\n",margin_top) + } + + /* FIND TOTAL NUMBER OF ACTIVE PIXELS (IMAGE + MARGIN) [pixels] */ + + total_active_pixels = margin_left + margin_right + X; + DEBUG_PRINTF("total_active_pixels: %f\n",total_active_pixels) + + if (type == GTF_PF) + { + ideal_H_period = ((c.c-100)+(sqrt(((100-c.c)*(100-c.c) )+(0.4*c.m*(total_active_pixels + margin_left + margin_right) / freq))))/2/c.m*1000; + + DEBUG_PRINTF("ideal_H_period: %f\n",ideal_H_period) + + /* FIND IDEAL BLANKING DUTY CYCLE FROM FORMULA [%] */ + ideal_duty_cycle = c.c - (c.m * ideal_H_period /1000); + DEBUG_PRINTF("ideal_duty_cycle: %f\n",ideal_duty_cycle) + + /* FIND BLANKING TIME (TO NEAREST CHAR CELL) [pixels] */ + + blanking_time = round(total_active_pixels * ideal_duty_cycle \ + / (100-ideal_duty_cycle) / (2*c.char_cell_granularity)) \ + * (2*c.char_cell_granularity); + DEBUG_PRINTF("blanking_time : %f\n",blanking_time ) + + /* FIND TOTAL NUMBER OF PIXELS IN A LINE [pixels] */ + H_total_pixels = total_active_pixels + blanking_time ; + DEBUG_PRINTF("H_total_pixels: %f\n",H_total_pixels) + H_freq = freq / H_total_pixels * 1000; + DEBUG_PRINTF("H_freq: %f\n",H_freq) + actual_H_period = 1000 / H_freq; + DEBUG_PRINTF("actual_H_period: %f\n",actual_H_period) + sync_plus_BP = round(H_freq * c.min_Vsync_BP/1000); +// sync_plus_BP = round( freq / H_total_pixels * c.min_Vsync_BP); + + DEBUG_PRINTF("sync_plus_BP: %f\n",sync_plus_BP) + + } else if (type == GTF_VF) + { + + /* ESTIMATE HORIZ. PERIOD [us] */ + + estimated_H_period = (( 1/RR ) - c.min_Vsync_BP/1000000 ) / (Y + (2 * margin_top) + c.min_front_porch + interlace) * 1000000; + + DEBUG_PRINTF("estimated_H_period: %f\n",estimated_H_period) + + /* FIND NUMBER OF LINES IN (SYNC + BACK PORCH) [lines] */ + + sync_plus_BP = round( c.min_Vsync_BP / estimated_H_period ); + DEBUG_PRINTF("sync_plus_BP: %f\n",sync_plus_BP) + + } else if (type == GTF_HF) + { + sync_plus_BP = round(freq * c.min_Vsync_BP/1000); + DEBUG_PRINTF("sync_plus_BP: %f\n",sync_plus_BP) + } + + + + /* FIND TOTAL NUMBER OF LINES IN VERTICAL FIELD */ + + V_total_lines_field = sync_plus_BP+interlace+margin_bottom+margin_top+Y+c.min_front_porch; + DEBUG_PRINTF("V_total_lines_field : %f\n",V_total_lines_field ) + + if (type == GTF_VF) + { + /* ESTIMATE VERTICAL FIELD RATE [hz] */ + + estimated_V_field_rate = 1 / estimated_H_period / V_total_lines_field * 1000000; + DEBUG_PRINTF(" estimated_V_field_rate: %f\n", estimated_V_field_rate) + /* FIND ACTUAL HORIZONTAL PERIOD [us] */ + + actual_H_period = estimated_H_period / (RR / estimated_V_field_rate); + DEBUG_PRINTF("actual_H_period: %f\n",actual_H_period) + /* FIND ACTUAL VERTICAL FIELD FREQUENCY [Hz] */ + + actual_V_field_freq = 1 / actual_H_period / V_total_lines_field * 1000000; + DEBUG_PRINTF("actual_V_field_freq: %f\n",actual_V_field_freq) + + /* FIND IDEAL BLANKING DUTY CYCLE FROM FORMULA [%] */ + ideal_duty_cycle = c.c - (c.m * actual_H_period /1000); + DEBUG_PRINTF("ideal_duty_cycle: %f\n",ideal_duty_cycle) + //if (type == GTF_VF) + //{ + //moved + //} + } else if (type == GTF_HF) + { + /* FIND IDEAL BLANKING DUTY CYCLE FROM FORMULA [%] */ + ideal_duty_cycle = c.c - (c.m / freq); + DEBUG_PRINTF("ideal_duty_cycle: %f\n",ideal_duty_cycle) + } + + /* FIND BLANKING TIME (TO NEAREST CHAR CELL) [pixels] */ + + if (!(type == GTF_PF)) + { + blanking_time = round(total_active_pixels * ideal_duty_cycle \ + / (100-ideal_duty_cycle) / (2*c.char_cell_granularity)) \ + * (2*c.char_cell_granularity); + DEBUG_PRINTF("blanking_time : %f\n",blanking_time ) + } + else +// if (type == GTF_PF) + { + actual_V_field_freq = H_freq / V_total_lines_field * 1000; + } + + if (type == GTF_HF) + { + /* Hz */ + actual_V_field_freq = freq / V_total_lines_field * 1000; + DEBUG_PRINTF("actual_V_field_freq: %f\n",actual_V_field_freq) + } + + + actual_V_frame_freq = actual_V_field_freq; + + /* FIND ACTUAL VERTICAL FRAME FREQUENCY [Hz]*/ + + if (want_interlace) actual_V_frame_freq = actual_V_field_freq / 2; + DEBUG_PRINTF("actual_V_frame_freq: %f\n",actual_V_frame_freq) + +// V_freq = actual_V_frame_freq; +// DEBUG_PRINTF("V_freq %f\n",V_freq) + + + if (!(type == GTF_PF)) + { + /* FIND TOTAL NUMBER OF PIXELS IN A LINE [pixels] */ + H_total_pixels = total_active_pixels + blanking_time ; + DEBUG_PRINTF("H_total_pixels: %f\n",H_total_pixels) + if (type == GTF_VF) + { + /* FIND PIXEL FREQUENCY [Mhz] */ + pixel_freq = H_total_pixels / actual_H_period ; + DEBUG_PRINTF("pixel_freq: %f\n",pixel_freq) + } else if (type == GTF_HF) + { + /* FIND PIXEL FREQUENCY [Mhz] */ + pixel_freq = H_total_pixels * freq / 1000 ; + DEBUG_PRINTF("pixel_freq: %f\n",pixel_freq) + actual_H_period = 1000/freq; + } + + /* FIND ACTUAL HORIZONTAL FREQUENCY [KHz] */ + + H_freq = 1000 / actual_H_period; + DEBUG_PRINTF("H_freq %f\n",H_freq) + + + } + + /* FIND NUMBER OF LINES IN BACK PORCH [lines] */ + + BP = sync_plus_BP - c.Vsync_need; + DEBUG_PRINTF("BP: %f\n",BP) + +/*------------------------------------------------------------------------------------------------*/ + /* FIND H SYNC WIDTH (TO NEAREST CHAR CELL) */ + H_sync_width = round(c.sync_width/100*H_total_pixels/c.char_cell_granularity)*c.char_cell_granularity; + DEBUG_PRINTF("H_sync_width %f\n",H_sync_width) + + /* FIND FRONT H PORCH(TO NEAREST CHAR CELL) */ + H_front_porch = (blanking_time/2) - H_sync_width; + DEBUG_PRINTF("H_front_porch %f\n",H_front_porch) + /* FIND BACK H PORCH(TO NEAREST CHAR CELL) */ + H_back_porch = H_sync_width + H_front_porch; + DEBUG_PRINTF("H_back_porch%f\n",H_back_porch) + + H_sync_start = H_total_pixels - (H_sync_width + H_back_porch); + DEBUG_PRINTF("H_sync_start %f\n",H_sync_start) + H_sync_end = H_total_pixels - H_back_porch; + DEBUG_PRINTF("H_sync_end %f\n",H_sync_end) + + V_back_porch = interlace + BP; + DEBUG_PRINTF("V_back_porch%f\n",V_back_porch) + V_front_porch = interlace + c.min_front_porch; + DEBUG_PRINTF("V_front_porch%f\n",V_front_porch) + + V_sync_width = c.Vsync_need; + V_sync_start = V_total_lines_field - (V_sync_width + V_back_porch); + DEBUG_PRINTF("V_sync_start %f\n",V_sync_start) + V_sync_end = V_total_lines_field - V_back_porch; + DEBUG_PRINTF("V_sync_end %f\n",V_sync_end) + + result->hTotal = H_total_pixels; + result-> hSyncStart = H_sync_start; /* Horizontal sync start in pixels */ + result-> hSyncEnd = H_sync_end; /* Horizontal sync end in pixels */ + result-> vTotal= V_total_lines_field; /* Vertical total in lines */ + result-> vSyncStart = V_sync_start; /* Vertical sync start in lines */ + result-> vSyncEnd = V_sync_end; /* Vertical sync end in lines */ + result-> Flags = (result->Flags)|VESA_CRTC_HSYNC_NEG; /* Flags (Interlaced, Double Scan etc) */ + + if (want_interlace) + { + result->Flags = (result->Flags) | VESA_CRTC_INTERLACED; + } + + result-> PixelClock = pixel_freq*1000000; /* Pixel clock in units of Hz */ + result-> RefreshRate = actual_V_frame_freq*100;/* Refresh rate in units of 0.01 Hz*/ + + } + + diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/gtf.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libvo/gtf.h Thu Aug 22 23:03:51 2002 +0000 @@ -0,0 +1,48 @@ +#ifndef __GTF_H +#define __GTF_H + +#include "linux/vbelib.h" + +#define GTF_VF 0 +#define GTF_HF 1 +#define GTF_PF 2 + + +typedef struct { + double Vsync_need; /* Number of lines for vert sync (default 3) */ + double min_Vsync_BP; /* Minimum vertical sync + back porch (us) (default 550)*/ + double min_front_porch; /* Minimum front porch in lines (default 1) */ + double char_cell_granularity; /* Character cell granularity in pixels (default 8) */ + double margin_width; /* Top/ bottom MARGIN size as % of height (%) (default 1.8) */ + double sync_width; /* Sync width percent of line period ( default 8) */ + double c; /* Blanking formula offset (default 40)*/ + double j; /* Blanking formula scaling factor weight (default 20)*/ + double k; /* Blanking formula scaling factor (default 128)*/ + double m; /* Blanking formula gradient (default 600)*/ + } GTF_constants; + +//#ifndef __VESA_VBELIB_INCLUDED__ +// struct VesaCRTCInfoBlock { +// unsigned short hTotal; /* Horizontal total in pixels */ +// unsigned short hSyncStart; /* Horizontal sync start in pixels */ +// unsigned short hSyncEnd; /* Horizontal sync end in pixels */ +// unsigned short vTotal; /* Vertical total in lines */ +// unsigned short vSyncStart; /* Vertical sync start in lines */ +// unsigned short vSyncEnd; /* Vertical sync end in lines */ +// unsigned char Flags; /* Flags (Interlaced, Double Scan etc) */ +// unsigned long PixelClock; /* Pixel clock in units of Hz */ +// unsigned short RefreshRate;/* Refresh rate in units of 0.01 Hz*/ +// unsigned char Reserved[40];/* remainder of CRTCInfoBlock*/ +//}__attribute__ ((packed)); + +//#define VESA_CRTC_DOUBLESCAN 0x01 +//#define VESA_CRTC_INTERLACED 0x02 +//#define VESA_CRTC_HSYNC_NEG 0x04 +//#define VESA_CRTC_VSYNC_NEG 0x08 + +//#endif + +void GTF_calcTimings(double X,double Y,double freq, int type, + int want_margins, int want_interlace,struct VesaCRTCInfoBlock *result); + +#endif diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/video_out.c --- a/libvo/video_out.c Thu Aug 22 21:30:31 2002 +0000 +++ b/libvo/video_out.c Thu Aug 22 23:03:51 2002 +0000 @@ -201,3 +201,85 @@ vo_dxr2_register_options(cfg); #endif } +#if defined(HAVE_FBDEV)||defined(HAVE_VESA) +/* Borrowed from vo_fbdev.c +Monitor ranges related functions*/ + +char *monitor_hfreq_str = NULL; +char *monitor_vfreq_str = NULL; +char *monitor_dotclock_str = NULL; + +float range_max(range_t *r) +{ +float max = 0; + + for (/* NOTHING */; (r->min != -1 && r->max != -1); r++) + if (max < r->max) max = r->max; + return max; +} + + +int in_range(range_t *r, float f) +{ + for (/* NOTHING */; (r->min != -1 && r->max != -1); r++) + if (f >= r->min && f <= r->max) + return 1; + return 0; +} + +range_t *str2range(char *s) +{ + float tmp_min, tmp_max; + char *endptr = s; // to start the loop + range_t *r = NULL; + int i; + + if (!s) + return NULL; + for (i = 0; *endptr; i++) { + if (*s == ',') + goto out_err; + if (!(r = (range_t *) realloc(r, sizeof(*r) * (i + 2)))) { + printf("can't realloc 'r'\n"); + return NULL; + } + tmp_min = strtod(s, &endptr); + if (*endptr == 'k' || *endptr == 'K') { + tmp_min *= 1000.0; + endptr++; + } else if (*endptr == 'm' || *endptr == 'M') { + tmp_min *= 1000000.0; + endptr++; + } + if (*endptr == '-') { + tmp_max = strtod(endptr + 1, &endptr); + if (*endptr == 'k' || *endptr == 'K') { + tmp_max *= 1000.0; + endptr++; + } else if (*endptr == 'm' || *endptr == 'M') { + tmp_max *= 1000000.0; + endptr++; + } + if (*endptr != ',' && *endptr) + goto out_err; + } else if (*endptr == ',' || !*endptr) { + tmp_max = tmp_min; + } else + goto out_err; + r[i].min = tmp_min; + r[i].max = tmp_max; + if (r[i].min < 0 || r[i].max < 0) + goto out_err; + s = endptr + 1; + } + r[i].min = r[i].max = -1; + return r; +out_err: + if (r) + free(r); + return NULL; +} + +/* Borrowed from vo_fbdev.c END */ +#endif + diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/video_out.h --- a/libvo/video_out.h Thu Aug 22 21:30:31 2002 +0000 +++ b/libvo/video_out.h Thu Aug 22 23:03:51 2002 +0000 @@ -241,4 +241,20 @@ extern char *vo_subdevice; +#if defined(HAVE_FBDEV)||defined(HAVE_VESA) + +typedef struct { + float min; + float max; + } range_t; + +extern float range_max(range_t *r); +extern int in_range(range_t *r, float f); +extern range_t *str2range(char *s); +extern char *monitor_hfreq_str; +extern char *monitor_vfreq_str; +extern char *monitor_dotclock_str; + +#endif + #endif diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/vo_fbdev.c --- a/libvo/vo_fbdev.c Thu Aug 22 21:30:31 2002 +0000 +++ b/libvo/vo_fbdev.c Thu Aug 22 23:03:51 2002 +0000 @@ -57,6 +57,14 @@ * fb.modes support * ******************************/ +extern char *monitor_hfreq_str; +extern char *monitor_vfreq_str; +extern char *monitor_dotclock_str; + +static range_t *monitor_hfreq = NULL; +static range_t *monitor_vfreq = NULL; +static range_t *monitor_dotclock = NULL; + typedef struct { char *name; uint32_t xres, yres, vxres, vyres, depth; @@ -396,18 +404,6 @@ return hsf(m) / vtotal; } -typedef struct { - float min; - float max; -} range_t; - -static int in_range(range_t *r, float f) -{ - for (/* NOTHING */; (r->min != -1 && r->max != -1); r++) - if (f >= r->min && f <= r->max) - return 1; - return 0; -} static int mode_works(fb_mode_t *m, range_t *hfreq, range_t *vfreq, range_t *dotclock) @@ -558,58 +554,6 @@ v->vmode = m->vmode; } -static range_t *str2range(char *s) -{ - float tmp_min, tmp_max; - char *endptr = s; // to start the loop - range_t *r = NULL; - int i; - - if (!s) - return NULL; - for (i = 0; *endptr; i++) { - if (*s == ',') - goto out_err; - if (!(r = (range_t *) realloc(r, sizeof(*r) * (i + 2)))) { - printf("can't realloc 'r'\n"); - return NULL; - } - tmp_min = strtod(s, &endptr); - if (*endptr == 'k' || *endptr == 'K') { - tmp_min *= 1000.0; - endptr++; - } else if (*endptr == 'm' || *endptr == 'M') { - tmp_min *= 1000000.0; - endptr++; - } - if (*endptr == '-') { - tmp_max = strtod(endptr + 1, &endptr); - if (*endptr == 'k' || *endptr == 'K') { - tmp_max *= 1000.0; - endptr++; - } else if (*endptr == 'm' || *endptr == 'M') { - tmp_max *= 1000000.0; - endptr++; - } - if (*endptr != ',' && *endptr) - goto out_err; - } else if (*endptr == ',' || !*endptr) { - tmp_max = tmp_min; - } else - goto out_err; - r[i].min = tmp_min; - r[i].max = tmp_max; - if (r[i].min < 0 || r[i].max < 0) - goto out_err; - s = endptr + 1; - } - r[i].min = r[i].max = -1; - return r; -out_err: - if (r) - free(r); - return NULL; -} /****************************** * vo_fbdev * @@ -619,14 +563,7 @@ char *fb_dev_name = NULL; char *fb_mode_cfgfile = "/etc/fb.modes"; char *fb_mode_name = NULL; -char *monitor_hfreq_str = NULL; -char *monitor_vfreq_str = NULL; -char *monitor_dotclock_str = NULL; -/* fb.modes related variables */ -static range_t *monitor_hfreq = NULL; -static range_t *monitor_vfreq = NULL; -static range_t *monitor_dotclock = NULL; static fb_mode_t *fb_mode = NULL; /* vt related variables */ diff -r 6c2d746b17bf -r 21e1ab99cb21 libvo/vo_vesa.c --- a/libvo/vo_vesa.c Thu Aug 22 21:30:31 2002 +0000 +++ b/libvo/vo_vesa.c Thu Aug 22 23:03:51 2002 +0000 @@ -16,7 +16,7 @@ - refresh rate support (need additional info from mplayer) */ #include "config.h" - +#include "gtf.h" #include #ifdef HAVE_MALLOC_H #include @@ -54,6 +54,10 @@ extern int verbose; +extern char *monitor_hfreq_str; +extern char *monitor_vfreq_str; +extern char *monitor_dotclock_str; + #define MAX_BUFFERS 3 #ifndef max @@ -523,18 +527,69 @@ return i; } +static int set_refresh(unsigned x, unsigned y, unsigned mode,struct VesaCRTCInfoBlock *crtc_pass) +{ + unsigned pixclk; + float H_freq; + + range_t *monitor_hfreq = NULL; + range_t *monitor_vfreq = NULL; + range_t *monitor_dotclock = NULL; + monitor_hfreq = str2range(monitor_hfreq_str); + monitor_vfreq = str2range(monitor_vfreq_str); + monitor_dotclock = str2range(monitor_dotclock_str); + + if (!monitor_hfreq || !monitor_vfreq || !monitor_dotclock) { + printf("vo_vesa: you have to specify the capabilities of" + " the monitor. Not changing refresh rate.\n"); + return 0; + } + + H_freq = range_max(monitor_hfreq)/1000; + +// printf("H_freq MAX %f\n",H_freq); + + do + { + H_freq -= 0.1; + GTF_calcTimings(x,y,H_freq,GTF_HF,0, 0,crtc_pass); +// printf("PixelCLK %d\n",(unsigned)crtc_pass->PixelClock); + } + while (!in_range(monitor_vfreq,crtc_pass->RefreshRate/100)); + + pixclk = crtc_pass->PixelClock; +// printf("PIXclk before %d\n",pixclk); + vbeGetPixelClock(&mode,&pixclk); +// printf("PIXclk after %d\n",pixclk); + GTF_calcTimings(x,y,pixclk/1000000,GTF_PF,0,0,crtc_pass); +// printf("Flags: %x\n",(unsigned) crtc_pass->Flags); +/* + printf("hTotal %d\n",crtc_pass->hTotal); + printf("hSyncStart %d\n",crtc_pass->hSyncStart); + printf("hSyncEnd %d\n",crtc_pass->hSyncEnd); + + printf("vTotal %d\n",crtc_pass->vTotal); + printf("vSyncStart %d\n",crtc_pass->vSyncStart); + printf("vSyncEnd %d\n",crtc_pass->vSyncEnd); + + printf("RR %d\n",crtc_pass->RefreshRate); + printf("PixelCLK %d\n",(unsigned)crtc_pass->PixelClock);*/ + return 1; +} /* fullscreen: * bit 0 (0x01) means fullscreen (-fs) * bit 1 (0x02) means mode switching (-vm) * bit 2 (0x04) enables software scaling (-zoom) * bit 3 (0x08) enables flipping (-flip) (NK: and for what?) */ + static uint32_t config(uint32_t width, uint32_t height, uint32_t d_width, uint32_t d_height, uint32_t flags, char *title, uint32_t format,const vo_tune_info_t *info) { - struct VbeInfoBlock vib; + struct VbeInfoBlock vib; struct VesaModeInfoBlock vmib; + struct VesaCRTCInfoBlock crtc_pass; size_t i,num_modes; uint32_t w,h; unsigned short *mode_ptr,win_seg; @@ -831,11 +886,26 @@ PRINT_VBE_ERR("vbeSaveState",err); return -1; } - if((err=vbeSetMode(video_mode,NULL)) != VBE_OK) + /* TODO: check for VBE 3, monitor limitation + user might pass refresh value + GTF constants might be read from monitor + for best results + */ + if (((int)(vib.VESAVersion >> 8) & 0xff) > 2) { + + if (set_refresh(dstW,dstH,video_mode,&crtc_pass)) + video_mode = video_mode | 0x800; + + } + + ; + + if ((err=vbeSetMode(video_mode,&crtc_pass)) != VBE_OK) { PRINT_VBE_ERR("vbeSetMode",err); return -1; } + /* Now we are in video mode!!!*/ /* Below 'return -1' is impossible */ if(verbose) diff -r 6c2d746b17bf -r 21e1ab99cb21 linux/vbelib.c --- a/linux/vbelib.c Thu Aug 22 21:30:31 2002 +0000 +++ b/linux/vbelib.c Thu Aug 22 23:03:51 2002 +0000 @@ -376,6 +376,26 @@ return retval; } +int vbeGetPixelClock(unsigned *mode,unsigned *pixel_clock) // in Hz +{ + struct LRMI_regs r; + int retval; + memset(&r,0,sizeof(struct LRMI_regs)); + r.eax = 0x4f0b; + r.ebx = 0; + r.edx = *mode; + r.ecx = *pixel_clock; + if(!VBE_LRMI_int(0x10,&r)) return VBE_VM86_FAIL; + retval = r.eax & 0xffff; + if(retval == 0x4f) + { + *pixel_clock = r.ecx; + retval = VBE_OK; + } + return retval; +} + + int vbeSaveState(void **data) { struct LRMI_regs r; diff -r 6c2d746b17bf -r 21e1ab99cb21 linux/vbelib.h --- a/linux/vbelib.h Thu Aug 22 21:30:31 2002 +0000 +++ b/linux/vbelib.h Thu Aug 22 23:03:51 2002 +0000 @@ -199,6 +199,7 @@ extern int vbeGetModeInfo(unsigned mode,struct VesaModeInfoBlock *); extern int vbeSetMode(unsigned mode,struct VesaCRTCInfoBlock *); extern int vbeGetMode(unsigned *mode); +extern int vbeGetPixelClock(unsigned *mode,unsigned *pixel_clock); extern int vbeSaveState(void **data); /* note never copy this data */ extern int vbeRestoreState(void *data); extern int vbeGetWindow(unsigned *win_num); /* win_A=0 or win_B=1 */