# HG changeset patch # User diego # Date 1138500698 0 # Node ID a9512fbdd5d4bfcd644532f4665d278612d29323 # Parent 2209c4bb274404ef02a8585f13329efa67be41e6 Unify the handling of escaped spaces. diff -r 2209c4bb2744 -r a9512fbdd5d4 DOCS/man/en/mplayer.1 --- a/DOCS/man/en/mplayer.1 Sun Jan 29 02:08:40 2006 +0000 +++ b/DOCS/man/en/mplayer.1 Sun Jan 29 02:11:38 2006 +0000 @@ -571,7 +571,7 @@ instead of the builtin codecs.conf. . .TP -.B \-include +.B \-include Specify configuration file to be parsed after the default ones. . .TP @@ -670,17 +670,17 @@ .TP .B \-autosync Gradually adjusts the A/\:V sync based on audio delay measurements. -Specifying \-autosync\ 0, the default, will cause frame timing to be based +Specifying \-autosync 0, the default, will cause frame timing to be based entirely on audio delay measurements. -Specifying \-autosync\ 1 will do the same, but will subtly change the A/\:V +Specifying \-autosync 1 will do the same, but will subtly change the A/V correction algorithm. An uneven video framerate in a movie which plays fine with \-nosound can often be helped by setting this to an integer value greater than 1. The higher the value, the closer the timing will be to \-nosound. -Try \-autosync\ 30 to smooth out problems with sound drivers which do +Try \-autosync 30 to smooth out problems with sound drivers which do not implement a perfect audio delay measurement. With this value, if large A/\:V sync offsets occur, they will only take about -1 or 2\ seconds to settle out. +1 or 2 seconds to settle out. This delay in reaction time to sudden A/\:V offsets should be the only side-effect of turning this option on, for all sound drivers. . @@ -943,7 +943,7 @@ (if present) with the chosen audio stream. . .TP -.B \-alang (also see \-aid) +.B \-alang (also see \-aid) Specify a priority list of audio languages to use. Different container formats employ different language codes. DVDs use ISO 639-1 two letter language codes, Matroska and NUT use ISO 639-2 @@ -1031,7 +1031,7 @@ Force minimum overlap search during verification to sectors. .IPs toc-bias Assume that the beginning offset of track 1 as reported in the TOC will be -addressed as LBA\ 0. +addressed as LBA 0. Some Toshiba drives need this for getting track boundaries correct. .IPs toc-offset= Add sectors to the values reported when addressing tracks. @@ -1041,7 +1041,7 @@ .RE . .TP -.B \-cdrom-device +.B \-cdrom-device Specify the CD-ROM device (default: /dev/\:cdrom). . .TP @@ -1074,7 +1074,7 @@ .PD 1 . .TP -.B \-chapter [\-] (DVD only) +.B \-chapter [\-] (DVD only) Specify which chapter to start playing at. Optionally specify which chapter to end playing at (default: 1). . @@ -1146,7 +1146,7 @@ .PD 1 . .TP -.B \-dvd-device (DVD only) +.B \-dvd-device (DVD only) Specify the DVD device (default: /dev/\:dvd). You can also specify a directory that contains files previously copied directly from a DVD (with e.g.\& vobcopy). @@ -1154,7 +1154,7 @@ copy DVD titles in the first place (see the examples). . .TP -.B \-dvdangle (DVD only) +.B \-dvdangle (DVD only) Some DVD discs contain scenes that can be viewed from multiple angles. Here you can tell MPlayer which angles to use (default: 1). . @@ -1350,7 +1350,7 @@ This option is obsolete now that MPlayer has OpenDML support. . .TP -.B \-sb (also see \-ss) +.B \-sb (also see \-ss) Seek to byte position. Useful for playback from CD-ROM images or VOB files with junk at the beginning. . @@ -1379,7 +1379,7 @@ .IPs "\-ss 56" Seeks to 56 seconds. .IPs "\-ss 01:10:00" -Seeks to 1\ hour 10\ min. +Seeks to 1 hour 10 min. .RE .PD 1 . @@ -1389,7 +1389,7 @@ Sometimes needed to play corrupted MPEG-TS files. . .TP -.B \-tsprobe +.B \-tsprobe When playing an MPEG-TS stream, this option lets you specify how many bytes in the stream you want MPlayer to search for the desired audio and video IDs. @@ -1622,7 +1622,7 @@ instead of at the end. . .TP -.B \-font (OSD only) +.B \-font (OSD only) Search for the OSD/\:SUB fonts in an alternative directory (default for normal fonts: ~/\:.mplayer/\:font/\:font.desc, default for FreeType fonts: ~/.mplayer/\:subfont.ttf). @@ -1652,12 +1652,12 @@ \-slang. . .TP -.B \-fribidi-charset (FriBiDi only) +.B \-fribidi-charset (FriBiDi only) Specifies the character set that will be passed to FriBiDi when decoding non-UTF-8 subtitles (default: ISO8859-8). . .TP -.B \-ifo +.B \-ifo Indicate the file that will be used to load palette and frame size for VOBsub subtitles. . @@ -1698,7 +1698,7 @@ If you cannot select one of the subtitles on a DVD, also try \-vobsubid. . .TP -.B \-slang (also see \-sid) +.B \-slang (also see \-sid) Specify a priority list of subtitle languages to use. Different container formats employ different language codes. DVDs use ISO 639-1 two letter language codes, Matroska uses ISO 639-2 @@ -1955,7 +1955,7 @@ Tells MPlayer to handle the subtitle file as UTF-8. . .TP -.B \-vobsub +.B \-vobsub Specify a VOBsub file to use for subtitles. Has to be the full pathname without extension, i.e.\& without the '.idx', '.ifo' or '.sub'. @@ -2140,7 +2140,7 @@ .IPs "" Explicitly choose the output device/\:interface to use (default: system-wide default). -For example, 'Analog\ Out' or 'Digital\ Out'. +For example, 'Analog Out' or 'Digital Out'. .RE .PD 1 . @@ -2432,7 +2432,7 @@ .PD 1 . .TP -.B \-guiwid (also see \-wid) (GUI only) +.B \-guiwid (also see \-wid) (GUI only) This tells the GUI to also use an X11 window and stick itself to the bottom of the video, which is useful to embed a mini-GUI in a browser (with the MPlayer plugin for instance). @@ -2553,7 +2553,7 @@ Enables VBI for the vesa, dfbmga and svga video output drivers. . .TP -.B \-wid (also see \-guiwid) (X11, OpenGL and DirectX only) +.B \-wid (also see \-guiwid) (X11, OpenGL and DirectX only) This tells MPlayer to attach to an existing window. Useful to embed MPlayer in a browser (e.g.\& the plugger extension). . @@ -3790,7 +3790,7 @@ .PD 1 . .TP -.B \-sws (also see \-vf scale and \-zoom) +.B \-sws (also see \-vf scale and \-zoom) Specify the software scaler algorithm to be used with the \-zoom option. This affects video output drivers which lack hardware acceleration, e.g.\& x11. .sp 1 @@ -6712,7 +6712,7 @@ . .TP .B vqmin=<1\-31> -minimum quantizer (pass\ 1/\:2) +minimum quantizer (pass 1/\:2) .RSs .IPs 1 Not recommended (much larger file, little quality difference and weird side @@ -6759,7 +6759,7 @@ .TP .B vqdiff=<1\-31> maximum quantizer difference between consecutive I- or P-frames -(pass\ 1/\:2) (default: 3) +(pass 1/\:2) (default: 3) . .TP .B vmax_b_frames=<0\-4> @@ -7002,7 +7002,7 @@ . .TP .B vbitrate= -Specify bitrate (pass\ 1/\:2) (default: 800). +Specify bitrate (pass 1/\:2) (default: 800). .br .I WARNING: 1kbit = 1000 bits @@ -7028,17 +7028,17 @@ . .TP .B vrc_maxrate= -maximum bitrate in kbit/\:sec (pass\ 1/\:2) +maximum bitrate in kbit/\:sec (pass 1/\:2) (default: 0, unlimited) . .TP .B vrc_minrate= -minimum bitrate in kbit/\:sec (pass\ 1/\:2) +minimum bitrate in kbit/\:sec (pass 1/\:2) (default: 0, unlimited) . .TP .B vrc_buf_size= -buffer size in kbit (pass\ 1/\:2). +buffer size in kbit (pass 1/\:2). For MPEG-1/2 this also sets the vbv buffer size, use 327 for VCD, 917 for SVCD and 1835 for DVD. . @@ -7052,19 +7052,19 @@ . .TP .B vb_qfactor=<-31.0\-31.0> -quantizer factor between B- and non-B-frames (pass\ 1/\:2) (default: 1.25) +quantizer factor between B- and non-B-frames (pass 1/\:2) (default: 1.25) . .TP .B vi_qfactor=<-31.0\-31.0> -quantizer factor between I- and non-I-frames (pass\ 1/\:2) (default: 0.8) +quantizer factor between I- and non-I-frames (pass 1/\:2) (default: 0.8) . .TP .B vb_qoffset=<-31.0\-31.0> -quantizer offset between B- and non-B-frames (pass\ 1/\:2) (default: 1.25) +quantizer offset between B- and non-B-frames (pass 1/\:2) (default: 1.25) . .TP .B vi_qoffset=<-31.0\-31.0> -(pass\ 1/\:2) (default: 0.0) +(pass 1/\:2) (default: 0.0) .br if v{b|i}_qfactor > 0 .br @@ -7100,7 +7100,7 @@ . .TP .B vqcomp=<0.0\-1.0> -Quantizer compression, vrc_eq depends upon this (pass\ 1/\:2) (default: 0.5). +Quantizer compression, vrc_eq depends upon this (pass 1/\:2) (default: 0.5). For instance, assuming the default rate control equation is used, if vqcomp=1.0, the ratecontrol allocates to each frame the number of bits needed to encode them all at the same QP. @@ -7112,7 +7112,7 @@ . .TP .B vrc_eq= -main ratecontrol equation (pass\ 1/\:2) +main ratecontrol equation (pass 1/\:2) .RE .RSs .IPs 1\ \ \ \ @@ -7185,7 +7185,7 @@ . .TP .B vrc_override= -User specified quality for specific parts (ending, credits, ...) (pass\ 1/\:2). +User specified quality for specific parts (ending, credits, ...) (pass 1/\:2). The options are , , [/\:, , [/\:...]]: .PD 0 @@ -7199,7 +7199,7 @@ . .TP .B vrc_init_cplx=<0\-1000> -initial complexity (pass\ 1) +initial complexity (pass 1) . .TP .B vrc_init_occupancy=<0.0\-1.0> @@ -7207,7 +7207,7 @@ . .TP .B vqsquish=<0|1> -Specify how to keep the quantizer between qmin and qmax (pass\ 1/\:2). +Specify how to keep the quantizer between qmin and qmax (pass 1/\:2). .PD 0 .RSs .IPs 0