Mercurial > mplayer.hg

changeset 3393:3624cd351618

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
runtime cpu detection
author michael
date Sun, 09 Dec 2001 15:25:11 +0000
parents 382ee94a716d
children 35b18ed357c2
files libvo/aclib.c libvo/aclib_template.c
diffstat 2 files changed, 98 insertions(+), 354 deletions(-) [+]
line wrap: on
line diff
--- a/libvo/aclib.c	Sun Dec 09 11:52:29 2001 +0000
+++ b/libvo/aclib.c	Sun Dec 09 15:25:11 2001 +0000
@@ -1,12 +1,14 @@
 #include "../config.h"
+#ifdef USE_FASTMEMCPY
 
-#ifdef USE_FASTMEMCPY
 /*
   aclib - advanced C library ;)
   This file contains functions which improve and expand standard C-library
+  see aclib_template.c ... this file only contains runtime cpu detection and config options stuff
+  runtime cpu detection by michael niedermayer (michaelni@gmx.at) is under GPL
 */
-
 #include <stddef.h>
+#include "../cpudetect.h"
 
 #define BLOCK_SIZE 4096
 #define CONFUSION_FACTOR 0
@@ -14,353 +16,106 @@
 
 //#define STATISTICS
 
-#ifndef HAVE_SSE2
-/*
-   P3 processor has only one SSE decoder so can execute only 1 sse insn per
-   cpu clock, but it has 3 mmx decoders (include load/store unit)
-   and executes 3 mmx insns per cpu clock.
-   P4 processor has some chances, but after reading:
-   http://www.emulators.com/pentium4.htm
-   I have doubts. Anyway SSE2 version of this code can be written better.
-*/
-#undef HAVE_SSE
+#ifdef ARCH_X86
+#define CAN_COMPILE_X86_ASM
+#endif
+
+//Note: we have MMX, MMX2, 3DNOW version there is no 3DNOW+MMX2 one
+//Plain C versions
+//#if !defined (HAVE_MMX) || defined (RUNTIME_CPUDETECT)
+//#define COMPILE_C
+//#endif
+
+#ifdef CAN_COMPILE_X86_ASM
+
+#if (defined (HAVE_MMX) && !defined (HAVE_3DNOW) && !defined (HAVE_MMX2)) || defined (RUNTIME_CPUDETECT)
+#define COMPILE_MMX
+#endif
+
+#if defined (HAVE_MMX2) || defined (RUNTIME_CPUDETECT)
+#define COMPILE_MMX2
+#endif
+
+#if (defined (HAVE_3DNOW) && !defined (HAVE_MMX2)) || defined (RUNTIME_CPUDETECT)
+#define COMPILE_3DNOW
 #endif
 
-
+#undef HAVE_MMX
+#undef HAVE_MMX2
+#undef HAVE_3DNOW
+#undef ARCH_X86
 /*
- This part of code was taken by me from Linux-2.4.3 and slightly modified
-for MMX, MMX2, SSE instruction set. I have done it since linux uses page aligned
-blocks but mplayer uses weakly ordered data and original sources can not
-speedup them. Only using PREFETCHNTA and MOVNTQ together have effect!
-
->From IA-32 Intel Architecture Software Developer's Manual Volume 1,
-
-Order Number 245470:
-"10.4.6. Cacheability Control, Prefetch, and Memory Ordering Instructions"
-
-Data referenced by a program can be temporal (data will be used again) or
-non-temporal (data will be referenced once and not reused in the immediate
-future). To make efficient use of the processor's caches, it is generally
-desirable to cache temporal data and not cache non-temporal data. Overloading
-the processor's caches with non-temporal data is sometimes referred to as
-"polluting the caches".
-The non-temporal data is written to memory with Write-Combining semantics.
-
-The PREFETCHh instructions permits a program to load data into the processor
-at a suggested cache level, so that it is closer to the processors load and
-store unit when it is needed. If the data is already present in a level of
-the cache hierarchy that is closer to the processor, the PREFETCHh instruction
-will not result in any data movement.
-But we should you PREFETCHNTA: Non-temporal data fetch data into location
-close to the processor, minimizing cache pollution.
-
-The MOVNTQ (store quadword using non-temporal hint) instruction stores
-packed integer data from an MMX register to memory, using a non-temporal hint.
-The MOVNTPS (store packed single-precision floating-point values using
-non-temporal hint) instruction stores packed floating-point data from an
-XMM register to memory, using a non-temporal hint.
-
-The SFENCE (Store Fence) instruction controls write ordering by creating a
-fence for memory store operations. This instruction guarantees that the results
-of every store instruction that precedes the store fence in program order is
-globally visible before any store instruction that follows the fence. The
-SFENCE instruction provides an efficient way of ensuring ordering between
-procedures that produce weakly-ordered data and procedures that consume that
-data.
-
-If you have questions please contact with me: Nick Kurshev: nickols_k@mail.ru.
+#ifdef COMPILE_C
+#undef HAVE_MMX
+#undef HAVE_MMX2
+#undef HAVE_3DNOW
+#undef ARCH_X86
+#define RENAME(a) a ## _C
+#include "aclib_template.c"
+#endif
 */
-
-// 3dnow memcpy support from kernel 2.4.2
-//  by Pontscho/fresh!mindworkz
-
-#if defined( HAVE_MMX2 ) || defined( HAVE_3DNOW ) || defined( HAVE_MMX )
-
-#undef HAVE_MMX1
-#if defined(HAVE_MMX) && !defined(HAVE_MMX2) && !defined(HAVE_3DNOW) && !defined(HAVE_SSE)
-/*  means: mmx v.1. Note: Since we added alignment of destinition it speedups
-    of memory copying on PentMMX, Celeron-1 and P2 upto 12% versus
-    standard (non MMX-optimized) version.
-    Note: on K6-2+ it speedups memory copying upto 25% and
-          on K7 and P3 about 500% (5 times). */
-#define HAVE_MMX1
-#endif
-
-
-#undef HAVE_K6_2PLUS
-#if !defined( HAVE_MMX2) && defined( HAVE_3DNOW)
-#define HAVE_K6_2PLUS
-#endif
-
-/* for small memory blocks (<256 bytes) this version is faster */
-#define small_memcpy(to,from,n)\
-{\
-register unsigned long int dummy;\
-__asm__ __volatile__(\
-	"rep; movsb"\
-	:"=&D"(to), "=&S"(from), "=&c"(dummy)\
-/* It's most portable way to notify compiler */\
-/* that edi, esi and ecx are clobbered in asm block. */\
-/* Thanks to A'rpi for hint!!! */\
-        :"0" (to), "1" (from),"2" (n)\
-	: "memory");\
-}
-
-#ifdef HAVE_SSE
-#define MMREG_SIZE 16
-#else
-#define MMREG_SIZE 64 //8
-#endif
-
-/* Small defines (for readability only) ;) */
-#ifdef HAVE_K6_2PLUS
-#define PREFETCH "prefetch"
-/* On K6 femms is faster of emms. On K7 femms is directly mapped on emms. */
-#define EMMS     "femms"
-#else
-#define PREFETCH "prefetchnta"
-#define EMMS     "emms"
-#endif
-
-#ifdef HAVE_MMX2
-#define MOVNTQ "movntq"
-#else
-#define MOVNTQ "movq"
-#endif
-
-#ifdef HAVE_MMX1
-#define MIN_LEN 0x800  /* 2K blocks */
-#else
-#define MIN_LEN 0x40  /* 64-byte blocks */
+//MMX versions
+#ifdef COMPILE_MMX
+#undef RENAME
+#define HAVE_MMX
+#undef HAVE_MMX2
+#undef HAVE_3DNOW
+#define ARCH_X86
+#define RENAME(a) a ## _MMX
+#include "aclib_template.c"
 #endif
 
-void * fast_memcpy(void * to, const void * from, size_t len)
-{
-	void *retval;
-	size_t i;
-	retval = to;
-#ifdef STATISTICS
-	{
-		static int freq[33];
-		static int t=0;
-		int i;
-		for(i=0; len>(1<<i); i++);
-		freq[i]++;
-		t++;
-		if(1024*1024*1024 % t == 0)
-			for(i=0; i<32; i++)
-				printf("freq < %8d %4d\n", 1<<i, freq[i]);
-	}
-#endif
-#ifndef HAVE_MMX1
-        /* PREFETCH has effect even for MOVSB instruction ;) */
-	__asm__ __volatile__ (
-	        PREFETCH" (%0)\n"
-	        PREFETCH" 64(%0)\n"
-	        PREFETCH" 128(%0)\n"
-        	PREFETCH" 192(%0)\n"
-        	PREFETCH" 256(%0)\n"
-		: : "r" (from) );
+//MMX2 versions
+#ifdef COMPILE_MMX2
+#undef RENAME
+#define HAVE_MMX
+#define HAVE_MMX2
+#undef HAVE_3DNOW
+#define ARCH_X86
+#define RENAME(a) a ## _MMX2
+#include "aclib_template.c"
 #endif
-        if(len >= MIN_LEN)
-	{
-	  register unsigned long int delta;
-          /* Align destinition to MMREG_SIZE -boundary */
-          delta = ((unsigned long int)to)&(MMREG_SIZE-1);
-          if(delta)
-	  {
-	    delta=MMREG_SIZE-delta;
-	    len -= delta;
-	    small_memcpy(to, from, delta);
-	  }
-	  i = len >> 6; /* len/64 */
-	  len&=63;
-        /*
-           This algorithm is top effective when the code consequently
-           reads and writes blocks which have size of cache line.
-           Size of cache line is processor-dependent.
-           It will, however, be a minimum of 32 bytes on any processors.
-           It would be better to have a number of instructions which
-           perform reading and writing to be multiple to a number of
-           processor's decoders, but it's not always possible.
-        */
-#ifdef HAVE_SSE /* Only P3 (may be Cyrix3) */
-	if(((unsigned long)from) & 15)
-	/* if SRC is misaligned */
-	for(; i>0; i--)
-	{
-		__asm__ __volatile__ (
-		PREFETCH" 320(%0)\n"
-		"movups (%0), %%xmm0\n"
-		"movups 16(%0), %%xmm1\n"
-		"movups 32(%0), %%xmm2\n"
-		"movups 48(%0), %%xmm3\n"
-		"movntps %%xmm0, (%1)\n"
-		"movntps %%xmm1, 16(%1)\n"
-		"movntps %%xmm2, 32(%1)\n"
-		"movntps %%xmm3, 48(%1)\n"
-		:: "r" (from), "r" (to) : "memory");
-		((const unsigned char *)from)+=64;
-		((unsigned char *)to)+=64;
-	}
-	else
-	/*
-	   Only if SRC is aligned on 16-byte boundary.
-	   It allows to use movaps instead of movups, which required data
-	   to be aligned or a general-protection exception (#GP) is generated.
-	*/
-	for(; i>0; i--)
-	{
-		__asm__ __volatile__ (
-		PREFETCH" 320(%0)\n"
-		"movaps (%0), %%xmm0\n"
-		"movaps 16(%0), %%xmm1\n"
-		"movaps 32(%0), %%xmm2\n"
-		"movaps 48(%0), %%xmm3\n"
-		"movntps %%xmm0, (%1)\n"
-		"movntps %%xmm1, 16(%1)\n"
-		"movntps %%xmm2, 32(%1)\n"
-		"movntps %%xmm3, 48(%1)\n"
-		:: "r" (from), "r" (to) : "memory");
-		((const unsigned char *)from)+=64;
-		((unsigned char *)to)+=64;
-	}
-#else
-	// Align destination at BLOCK_SIZE boundary
-	for(; ((int)to & (BLOCK_SIZE-1)) && i>0; i--)
-	{
-		__asm__ __volatile__ (
-#ifndef HAVE_MMX1
-        	PREFETCH" 320(%0)\n"
-#endif
-		"movq (%0), %%mm0\n"
-		"movq 8(%0), %%mm1\n"
-		"movq 16(%0), %%mm2\n"
-		"movq 24(%0), %%mm3\n"
-		"movq 32(%0), %%mm4\n"
-		"movq 40(%0), %%mm5\n"
-		"movq 48(%0), %%mm6\n"
-		"movq 56(%0), %%mm7\n"
-		MOVNTQ" %%mm0, (%1)\n"
-		MOVNTQ" %%mm1, 8(%1)\n"
-		MOVNTQ" %%mm2, 16(%1)\n"
-		MOVNTQ" %%mm3, 24(%1)\n"
-		MOVNTQ" %%mm4, 32(%1)\n"
-		MOVNTQ" %%mm5, 40(%1)\n"
-		MOVNTQ" %%mm6, 48(%1)\n"
-		MOVNTQ" %%mm7, 56(%1)\n"
-		:: "r" (from), "r" (to) : "memory");
-		((const unsigned char *)from)+=64;
-		((unsigned char *)to)+=64;
-	}
 
-//	printf(" %d %d\n", (int)from&1023, (int)to&1023);
-	// Pure Assembly cuz gcc is a bit unpredictable ;)
-	if(i>=BLOCK_SIZE/64)
-		asm volatile(
-			"xorl %%eax, %%eax	\n\t"
-			".balign 16		\n\t"
-			"1:			\n\t"
-				"movl (%0, %%eax), %%ebx 	\n\t"
-				"movl 32(%0, %%eax), %%ebx 	\n\t"
-				"movl 64(%0, %%eax), %%ebx 	\n\t"
-				"movl 96(%0, %%eax), %%ebx 	\n\t"
-				"addl $128, %%eax		\n\t"
-				"cmpl %3, %%eax			\n\t"
-				" jb 1b				\n\t"
-
-			"xorl %%eax, %%eax	\n\t"
-
-				".balign 16		\n\t"
-				"2:			\n\t"
-				"movq (%0, %%eax), %%mm0\n"
-				"movq 8(%0, %%eax), %%mm1\n"
-				"movq 16(%0, %%eax), %%mm2\n"
-				"movq 24(%0, %%eax), %%mm3\n"
-				"movq 32(%0, %%eax), %%mm4\n"
-				"movq 40(%0, %%eax), %%mm5\n"
-				"movq 48(%0, %%eax), %%mm6\n"
-				"movq 56(%0, %%eax), %%mm7\n"
-				MOVNTQ" %%mm0, (%1, %%eax)\n"
-				MOVNTQ" %%mm1, 8(%1, %%eax)\n"
-				MOVNTQ" %%mm2, 16(%1, %%eax)\n"
-				MOVNTQ" %%mm3, 24(%1, %%eax)\n"
-				MOVNTQ" %%mm4, 32(%1, %%eax)\n"
-				MOVNTQ" %%mm5, 40(%1, %%eax)\n"
-				MOVNTQ" %%mm6, 48(%1, %%eax)\n"
-				MOVNTQ" %%mm7, 56(%1, %%eax)\n"
-				"addl $64, %%eax		\n\t"
-				"cmpl %3, %%eax		\n\t"
-				"jb 2b				\n\t"
-
-#if CONFUSION_FACTOR > 0
-	// a few percent speedup on out of order executing CPUs
-			"movl %5, %%eax		\n\t"
-				"2:			\n\t"
-				"movl (%0), %%ebx	\n\t"
-				"movl (%0), %%ebx	\n\t"
-				"movl (%0), %%ebx	\n\t"
-				"movl (%0), %%ebx	\n\t"
-				"decl %%eax		\n\t"
-				" jnz 2b		\n\t"
+//3DNOW versions
+#ifdef COMPILE_3DNOW
+#undef RENAME
+#define HAVE_MMX
+#undef HAVE_MMX2
+#define HAVE_3DNOW
+#define ARCH_X86
+#define RENAME(a) a ## _3DNow
+#include "aclib_template.c"
 #endif
 
-			"xorl %%eax, %%eax	\n\t"
-			"addl %3, %0		\n\t"
-			"addl %3, %1		\n\t"
-			"subl %4, %2		\n\t"
-			"cmpl %4, %2		\n\t"
-			" jae 1b		\n\t"
-				: "+r" (from), "+r" (to), "+r" (i)
-				: "r" (BLOCK_SIZE), "i" (BLOCK_SIZE/64), "i" (CONFUSION_FACTOR)
-				: "%eax", "%ebx"
-		);
+#endif // CAN_COMPILE_X86_ASM
+
 
-	for(; i>0; i--)
-	{
-		__asm__ __volatile__ (
-#ifndef HAVE_MMX1
-        	PREFETCH" 320(%0)\n"
+inline void * fast_memcpy(void * to, const void * from, size_t len)
+{
+#ifdef RUNTIME_CPUDETECT
+#ifdef CAN_COMPILE_X86_ASM
+	// ordered per speed fasterst first
+	if(gCpuCaps.hasMMX2)
+		fast_memcpy_MMX2(to, from, len);
+	else if(gCpuCaps.has3DNow)
+		fast_memcpy_3DNow(to, from, len);
+	else if(gCpuCaps.hasMMX)
+		fast_memcpy_MMX(to, from, len);
+	else
+#endif //CAN_COMPILE_X86_ASM
+		memcpy(to, from, len); // prior to mmx we use the standart memcpy
+#else
+#ifdef HAVE_MMX2
+		fast_memcpy_MMX2(to, from, len);
+#elif defined (HAVE_3DNOW)
+		fast_memcpy_3DNow(to, from, len);
+#elif defined (HAVE_MMX)
+		fast_memcpy_MMX(to, from, len);
+#else
+		memcpy(to, from, len); // prior to mmx we use the standart memcpy
 #endif
-		"movq (%0), %%mm0\n"
-		"movq 8(%0), %%mm1\n"
-		"movq 16(%0), %%mm2\n"
-		"movq 24(%0), %%mm3\n"
-		"movq 32(%0), %%mm4\n"
-		"movq 40(%0), %%mm5\n"
-		"movq 48(%0), %%mm6\n"
-		"movq 56(%0), %%mm7\n"
-		MOVNTQ" %%mm0, (%1)\n"
-		MOVNTQ" %%mm1, 8(%1)\n"
-		MOVNTQ" %%mm2, 16(%1)\n"
-		MOVNTQ" %%mm3, 24(%1)\n"
-		MOVNTQ" %%mm4, 32(%1)\n"
-		MOVNTQ" %%mm5, 40(%1)\n"
-		MOVNTQ" %%mm6, 48(%1)\n"
-		MOVNTQ" %%mm7, 56(%1)\n"
-		:: "r" (from), "r" (to) : "memory");
-		((const unsigned char *)from)+=64;
-		((unsigned char *)to)+=64;
-	}
 
-#endif /* Have SSE */
-#ifdef HAVE_MMX2
-                /* since movntq is weakly-ordered, a "sfence"
-		 * is needed to become ordered again. */
-		__asm__ __volatile__ ("sfence":::"memory");
-#endif
-#ifndef HAVE_SSE
-		/* enables to use FPU */
-		__asm__ __volatile__ (EMMS:::"memory");
-#endif
-	}
-	/*
-	 *	Now do the tail of the block
-	 */
-	if(len) small_memcpy(to, from, len);
-	return retval;
+#endif //!RUNTIME_CPUDETECT
 }
 
-
-#endif /* #if defined( HAVE_MMX2 ) || defined( HAVE_3DNOW ) || defined( HAVE_MMX ) */
-#endif /* USE_FASTMEMCPY */
+#endif /* use fastmemcpy */
\ No newline at end of file
--- a/libvo/aclib_template.c	Sun Dec 09 11:52:29 2001 +0000
+++ b/libvo/aclib_template.c	Sun Dec 09 15:25:11 2001 +0000
@@ -1,19 +1,8 @@
-#include "../config.h"
-
-#ifdef USE_FASTMEMCPY
 /*
   aclib - advanced C library ;)
   This file contains functions which improve and expand standard C-library
 */
 
-#include <stddef.h>
-
-#define BLOCK_SIZE 4096
-#define CONFUSION_FACTOR 0
-//Feel free to fine-tune the above 2, it might be possible to get some speedup with them :)
-
-//#define STATISTICS
-
 #ifndef HAVE_SSE2
 /*
    P3 processor has only one SSE decoder so can execute only 1 sse insn per
@@ -74,7 +63,6 @@
 // 3dnow memcpy support from kernel 2.4.2
 //  by Pontscho/fresh!mindworkz
 
-#if defined( HAVE_MMX2 ) || defined( HAVE_3DNOW ) || defined( HAVE_MMX )
 
 #undef HAVE_MMX1
 #if defined(HAVE_MMX) && !defined(HAVE_MMX2) && !defined(HAVE_3DNOW) && !defined(HAVE_SSE)
@@ -106,6 +94,7 @@
 	: "memory");\
 }
 
+#undef MMREG_SIZE
 #ifdef HAVE_SSE
 #define MMREG_SIZE 16
 #else
@@ -113,6 +102,8 @@
 #endif
 
 /* Small defines (for readability only) ;) */
+#undef PREFETCH
+#undef EMMS
 #ifdef HAVE_K6_2PLUS
 #define PREFETCH "prefetch"
 /* On K6 femms is faster of emms. On K7 femms is directly mapped on emms. */
@@ -122,19 +113,21 @@
 #define EMMS     "emms"
 #endif
 
+#undef MOVNTQ
 #ifdef HAVE_MMX2
 #define MOVNTQ "movntq"
 #else
 #define MOVNTQ "movq"
 #endif
 
+#undef MIN_LEN
 #ifdef HAVE_MMX1
 #define MIN_LEN 0x800  /* 2K blocks */
 #else
 #define MIN_LEN 0x40  /* 64-byte blocks */
 #endif
 
-void * fast_memcpy(void * to, const void * from, size_t len)
+static inline void * RENAME(fast_memcpy)(void * to, const void * from, size_t len)
 {
 	void *retval;
 	size_t i;
@@ -360,7 +353,3 @@
 	if(len) small_memcpy(to, from, len);
 	return retval;
 }
-
-
-#endif /* #if defined( HAVE_MMX2 ) || defined( HAVE_3DNOW ) || defined( HAVE_MMX ) */
-#endif /* USE_FASTMEMCPY */