changeset 2352:3b22db95aaf6

cache seeking fixed(?)

--- a/libmpdemux/cache2.c	Sun Oct 21 21:12:00 2001 +0000
+++ b/libmpdemux/cache2.c	Sun Oct 21 22:13:12 2001 +0000
@@ -1,14 +1,13 @@
 #include "config.h"
 
 #ifdef USE_STREAM_CACHE
-// gcc cache2.c ../linux/shmem.o -o cache2
 
 // Initial draft of my new cache system...
-// includes some simulation code, using usleep() to emulate limited bandwith
+// Note it runs in 2 processes (using fork()), but doesn't requires locking!!
 // TODO: seeking, data consistency checking
 
-#define READ_SPEED 20
-#define FILL_SPEED 10
+#define READ_USLEEP_TIME 10000
+#define FILL_USLEEP_TIME 50000
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -26,11 +25,10 @@
 typedef struct {
   // constats:
   unsigned char *buffer;      // base pointer of the alllocated buffer memory
-  int buffer_size;   // size of the alllocated buffer memory
-  int sector_size;   // size of a single sector (2048/2324)
-     // Note: buffer_size should be N*sector_size, where N is integer...
-  int back_size;  // we should keep back_size amount of old bytes for backward seek
-  int fill_limit; // we should fill buffer if space>fill_limit
+  int buffer_size; // size of the alllocated buffer memory
+  int sector_size; // size of a single sector (2048/2324)
+  int back_size;   // we should keep back_size amount of old bytes for backward seek
+  int fill_limit;  // we should fill buffer only if space>=fill_limit
   // reader's pointers:
   int read_filepos;
   // filler's pointers:
@@ -39,14 +37,16 @@
   int offset;      // filepos <-> bufferpos  offset value (filepos of the buffer's first byte)
   int eof;
   // commands/locking:
-  int cmd_lock;   // 1 if we will seek/reset buffer, 2 if we are ready for cmd
-  int fifo_flag;  // 1 if we should use FIFO to notice cache about buffer reads.
+//  int seek_lock;   // 1 if we will seek/reset buffer, 2 if we are ready for cmd
+//  int fifo_flag;  // 1 if we should use FIFO to notice cache about buffer reads.
   // callback
   stream_t* stream;
 } cache_vars_t;
 
-int min_fill=0;
-int sleep_flag=0;
+static int min_fill=0;
+static int sleep_flag=0;
+
+int cache_fill_status=0;
 
 void cache_stats(cache_vars_t* s){
   int newb=s->max_filepos-s->read_filepos; // new bytes in the buffer
@@ -58,33 +58,38 @@
   int total=0;
   while(size>0){
     int pos,newb,len;
-    
-    pos=s->read_filepos - s->offset;
-    if(pos<0) pos+=s->buffer_size; else
-    if(pos>=s->buffer_size) pos-=s->buffer_size;
+
+  //printf("CACHE2_READ: 0x%X <= 0x%X <= 0x%X  \n",s->min_filepos,s->read_filepos,s->max_filepos);
     
     newb=s->max_filepos-s->read_filepos; // new bytes in the buffer
 
+    if(newb<=0 || s->read_filepos<s->min_filepos){
+	// eof?
+	if(s->eof) break;
+	// waiting for buffer fill...
+	usleep(READ_USLEEP_TIME); // 10ms
+	continue; // try again...
+    }
+
     if(newb<min_fill) min_fill=newb; // statistics...
 
-    if(newb<=0){
-	// eof?
-	if(s->eof) break;
-	// waiting for buffer fill...
-	usleep(10000); // 10ms
-	continue;
-    }
-    
 //    printf("*** newb: %d bytes ***\n",newb);
-    
+
+    pos=s->read_filepos - s->offset;
+    if(pos<0) pos+=s->buffer_size; else
+    if(pos>=s->buffer_size) pos-=s->buffer_size;
+
     if(newb>s->buffer_size-pos) newb=s->buffer_size-pos; // handle wrap...
     if(newb>size) newb=size;
     
+    // check:
+    if(s->read_filepos<s->min_filepos) printf("Ehh. s->read_filepos<s->min_filepos !!! Report bug...\n");
+    
     // len=write(mem,newb)
     //printf("Buffer read: %d bytes\n",newb);
     memcpy(buf,&s->buffer[pos],newb);
     buf+=newb;
-    len=newb; //usleep(len*READ_SPEED*sleep_flag);
+    len=newb;
     // ...
     
     s->read_filepos+=len;
@@ -92,14 +97,25 @@
     total+=len;
     
   }
+  cache_fill_status=100*(s->max_filepos-s->read_filepos)/s->buffer_size;
   return total;
 }
 
 int cache_fill(cache_vars_t* s){
-  int read,back,newb,space,len,pos,endpos;
+  int read,back,back2,newb,space,len,pos,endpos;
   
   read=s->read_filepos;
   
+  if(read<s->min_filepos || read>s->max_filepos){
+      // seek...
+      printf("Out of boundaries... seeking to 0x%X  \n",read);
+      s->offset= // FIXME!?
+      s->min_filepos=s->max_filepos=read; // drop cache content :(
+      if(s->stream->eof) stream_reset(s->stream);
+      stream_seek(s->stream,read);
+      printf("Seek done. new pos: 0x%X  \n",(int)stream_tell(s->stream));
+  }
+  
   // calc number of back-bytes:
   back=read - s->min_filepos;
   if(back<0) back=0; // strange...
@@ -129,11 +145,18 @@
 //  if(space>32768) space=32768; // limit one-time block size
   if(space>4*s->sector_size) space=4*s->sector_size;
   
+//  if(s->seek_lock) return 0; // FIXME
+
+#if 1
+  // back+newb+space <= buffer_size
+  back2=s->buffer_size-(space+newb); // max back size
+  if(s->min_filepos<(read-back2)) s->min_filepos=read-back2;
+#else
   s->min_filepos=read-back; // avoid seeking-back to temp area...
+#endif
   
   // ....
   //printf("Buffer fill: %d bytes of %d\n",space,s->buffer_size);
-  //len=space; usleep(len*FILL_SPEED*sleep_flag);
   //len=stream_fill_buffer(s->stream);
   //memcpy(&s->buffer[pos],s->stream->buffer,len); // avoid this extra copy!
   // ....
@@ -177,7 +200,7 @@
   signal(SIGTERM,exit_sighandler); // kill
   while(1){
     if(!cache_fill(s->cache_data)){
-	 usleep(50000); // idle
+	 usleep(FILL_USLEEP_TIME); // idle
     }
 //	 cache_stats(s->cache_data);
   }
@@ -188,9 +211,12 @@
   if(s->eof){ s->buf_pos=s->buf_len=0; return 0; }
   if(!s->cache_pid) return stream_fill_buffer(s);
 
-  cache_stats(s->cache_data);
+//  cache_stats(s->cache_data);
+
+  if(s->pos!=((cache_vars_t*)s->cache_data)->read_filepos) printf("!!! read_filepos differs!!! report this bug...\n");
 
   len=cache_read(s->cache_data,s->buffer, ((cache_vars_t*)s->cache_data)->sector_size);
+  //printf("cache_stream_fill_buffer->read -> %d\n",len);
 
   if(len<=0){ s->eof=1; s->buf_pos=s->buf_len=0; return 0; }
   s->buf_pos=0;
@@ -201,11 +227,32 @@
 
 }
 
-int cache_stream_seek_long(stream_t *s,off_t pos){
+int cache_stream_seek_long(stream_t *stream,off_t pos){
+  cache_vars_t* s;
+  off_t newpos;
+  if(!stream->cache_pid) return stream_seek_long(stream,pos);
+  
+  s=stream->cache_data;
+//  s->seek_lock=1;
+  
+  printf("CACHE2_SEEK: 0x%X <= 0x%X (0x%X) <= 0x%X  \n",s->min_filepos,(int)pos,s->read_filepos,s->max_filepos);
 
-  if(!s->cache_pid) return stream_seek_long(s,pos);
+  newpos=pos/s->sector_size; newpos*=s->sector_size; // align
+  stream->pos=s->read_filepos=newpos;
+  s->eof=0; // !!!!!!!
+
+  cache_stream_fill_buffer(stream);
 
-  printf("cache2 seek not implemented!!!!!!!!\n");
+  pos-=newpos;
+  if(pos>=0 && pos<=stream->buf_len){
+    stream->buf_pos=pos; // byte position in sector
+    return 1;
+  }
+
+//  stream->buf_pos=stream->buf_len=0;
+//  return 1;
+
+  printf("cache_stream_seek: WARNING! Can't seek to 0x%X !\n",(int)(pos+newpos));
   return 0;
 }