Mercurial > mplayer.hg
changeset 26098:7a1cbce928f2
Remove now deprecated Savage VIDIX driver sources
| author | ben |
|---|---|
| date | Fri, 29 Feb 2008 20:04:03 +0000 |
| parents | 74106358c073 |
| children | 13af6fff168d |
| files | vidix/savage_regs.h vidix/savage_vid.c |
| diffstat | 2 files changed, 0 insertions(+), 1650 deletions(-) [+] |
line wrap: on
line diff
--- a/vidix/savage_regs.h Fri Feb 29 20:02:37 2008 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,279 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/savage/savage_regs.h,v 1.10 2001/11/04 22:17:48 alanh Exp $ */ - -#ifndef MPLAYER_SAVAGE_REGS_H -#define MPLAYER_SAVAGE_REGS_H - -#define S3_SAVAGE3D_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX)) - -#define S3_SAVAGE4_SERIES(chip) ((chip==S3_SAVAGE4) || (chip==S3_PROSAVAGE)) - -#define S3_SAVAGE_MOBILE_SERIES(chip) ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE)) - -#define S3_SAVAGE_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000)) - - -/* Chip tags. These are used to group the adapters into - * related families. - */ - - -enum S3CHIPTAGS { - S3_UNKNOWN = 0, - S3_SAVAGE3D, - S3_SAVAGE_MX, - S3_SAVAGE4, - S3_PROSAVAGE, - S3_SUPERSAVAGE, - S3_SAVAGE2000, - S3_LAST -}; - -typedef struct { - unsigned int mode, refresh; - unsigned char SR08, SR0E, SR0F; - unsigned char SR10, SR11, SR12, SR13, SR15, SR18, SR1B, SR29, SR30; - unsigned char SR54[8]; - unsigned char Clock; - unsigned char CR31, CR32, CR33, CR34, CR36, CR3A, CR3B, CR3C; - unsigned char CR40, CR41, CR42, CR43, CR45; - unsigned char CR50, CR51, CR53, CR55, CR58, CR5B, CR5D, CR5E; - unsigned char CR60, CR63, CR65, CR66, CR67, CR68, CR69, CR6D, CR6F; - unsigned char CR86, CR88; - unsigned char CR90, CR91, CRB0; - unsigned int STREAMS[22]; /* yuck, streams regs */ - unsigned int MMPR0, MMPR1, MMPR2, MMPR3; -} SavageRegRec, *SavageRegPtr; - - - -#define BIOS_BSIZE 1024 -#define BIOS_BASE 0xc0000 - -#define SAVAGE_NEWMMIO_REGBASE_S3 0x1000000 /* 16MB */ -#define SAVAGE_NEWMMIO_REGBASE_S4 0x0000000 -#define SAVAGE_NEWMMIO_REGSIZE 0x0080000 /* 512kb */ -#define SAVAGE_NEWMMIO_VGABASE 0x8000 - -#define BASE_FREQ 14.31818 - -#define FIFO_CONTROL_REG 0x8200 -#define MIU_CONTROL_REG 0x8204 -#define STREAMS_TIMEOUT_REG 0x8208 -#define MISC_TIMEOUT_REG 0x820c - -/* Stream Processor 1 */ - -/* Primary Stream 1 Frame Buffer Address 0 */ -#define PRI_STREAM_FBUF_ADDR0 0x81c0 -/* Primary Stream 1 Frame Buffer Address 0 */ -#define PRI_STREAM_FBUF_ADDR1 0x81c4 -/* Primary Stream 1 Stride */ -#define PRI_STREAM_STRIDE 0x81c8 -/* Primary Stream 1 Frame Buffer Size */ -#define PRI_STREAM_BUFFERSIZE 0x8214 - -/* Secondary stream 1 Color/Chroma Key Control */ -#define SEC_STREAM_CKEY_LOW 0x8184 -/* Secondary stream 1 Chroma Key Upper Bound */ -#define SEC_STREAM_CKEY_UPPER 0x8194 -/* Blend Control of Secondary Stream 1 & 2 */ -#define BLEND_CONTROL 0x8190 -/* Secondary Stream 1 Color conversion/Adjustment 1 */ -#define SEC_STREAM_COLOR_CONVERT1 0x8198 -/* Secondary Stream 1 Color conversion/Adjustment 2 */ -#define SEC_STREAM_COLOR_CONVERT2 0x819c -/* Secondary Stream 1 Color conversion/Adjustment 3 */ -#define SEC_STREAM_COLOR_CONVERT3 0x81e4 -/* Secondary Stream 1 Horizontal Scaling */ -#define SEC_STREAM_HSCALING 0x81a0 -/* Secondary Stream 1 Frame Buffer Size */ -#define SEC_STREAM_BUFFERSIZE 0x81a8 -/* Secondary Stream 1 Horizontal Scaling Normalization (2K only) */ -#define SEC_STREAM_HSCALE_NORMALIZE 0x81ac -/* Secondary Stream 1 Horizontal Scaling */ -#define SEC_STREAM_VSCALING 0x81e8 -/* Secondary Stream 1 Frame Buffer Address 0 */ -#define SEC_STREAM_FBUF_ADDR0 0x81d0 -/* Secondary Stream 1 Frame Buffer Address 1 */ -#define SEC_STREAM_FBUF_ADDR1 0x81d4 -/* Secondary Stream 1 Frame Buffer Address 2 */ -#define SEC_STREAM_FBUF_ADDR2 0x81ec -/* Secondary Stream 1 Stride */ -#define SEC_STREAM_STRIDE 0x81d8 -/* Secondary Stream 1 Window Start Coordinates */ -#define SEC_STREAM_WINDOW_START 0x81f8 -/* Secondary Stream 1 Window Size */ -#define SEC_STREAM_WINDOW_SZ 0x81fc -/* Secondary Streams Tile Offset */ -#define SEC_STREAM_TILE_OFF 0x821c -/* Secondary Stream 1 Opaque Overlay Control */ -#define SEC_STREAM_OPAQUE_OVERLAY 0x81dc - - -/* Stream Processor 2 */ - -/* Primary Stream 2 Frame Buffer Address 0 */ -#define PRI_STREAM2_FBUF_ADDR0 0x81b0 -/* Primary Stream 2 Frame Buffer Address 1 */ -#define PRI_STREAM2_FBUF_ADDR1 0x81b4 -/* Primary Stream 2 Stride */ -#define PRI_STREAM2_STRIDE 0x81b8 -/* Primary Stream 2 Frame Buffer Size */ -#define PRI_STREAM2_BUFFERSIZE 0x8218 - -/* Secondary Stream 2 Color/Chroma Key Control */ -#define SEC_STREAM2_CKEY_LOW 0x8188 -/* Secondary Stream 2 Chroma Key Upper Bound */ -#define SEC_STREAM2_CKEY_UPPER 0x818c -/* Secondary Stream 2 Horizontal Scaling */ -#define SEC_STREAM2_HSCALING 0x81a4 -/* Secondary Stream 2 Horizontal Scaling */ -#define SEC_STREAM2_VSCALING 0x8204 -/* Secondary Stream 2 Frame Buffer Size */ -#define SEC_STREAM2_BUFFERSIZE 0x81ac -/* Secondary Stream 2 Frame Buffer Address 0 */ -#define SEC_STREAM2_FBUF_ADDR0 0x81bc -/* Secondary Stream 2 Frame Buffer Address 1 */ -#define SEC_STREAM2_FBUF_ADDR1 0x81e0 -/* Secondary Stream 2 Frame Buffer Address 2 */ -#define SEC_STREAM2_FBUF_ADDR2 0x8208 -/* Multiple Buffer/LPB and Secondary Stream 2 Stride */ -#define SEC_STREAM2_STRIDE_LPB 0x81cc -/* Secondary Stream 2 Color conversion/Adjustment 1 */ -#define SEC_STREAM2_COLOR_CONVERT1 0x81f0 -/* Secondary Stream 2 Color conversion/Adjustment 2 */ -#define SEC_STREAM2_COLOR_CONVERT2 0x81f4 -/* Secondary Stream 2 Color conversion/Adjustment 3 */ -#define SEC_STREAM2_COLOR_CONVERT3 0x8200 -/* Secondary Stream 2 Window Start Coordinates */ -#define SEC_STREAM2_WINDOW_START 0x820c -/* Secondary Stream 2 Window Size */ -#define SEC_STREAM2_WINDOW_SZ 0x8210 -/* Secondary Stream 2 Opaque Overlay Control */ -#define SEC_STREAM2_OPAQUE_OVERLAY 0x8180 - - -/* savage 2000 */ -#define SEC_STREAM_COLOR_CONVERT0_2000 0x8198 -#define SEC_STREAM_COLOR_CONVERT1_2000 0x819c -#define SEC_STREAM_COLOR_CONVERT2_2000 0x81e0 -#define SEC_STREAM_COLOR_CONVERT3_2000 0x81e4 - -#define SUBSYS_STAT_REG 0x8504 - -#define SRC_BASE 0xa4d4 -#define DEST_BASE 0xa4d8 -#define CLIP_L_R 0xa4dc -#define CLIP_T_B 0xa4e0 -#define DEST_SRC_STR 0xa4e4 -#define MONO_PAT_0 0xa4e8 -#define MONO_PAT_1 0xa4ec - -/* Constants for CR69. */ - -#define CRT_ACTIVE 0x01 -#define LCD_ACTIVE 0x02 -#define TV_ACTIVE 0x04 -#define CRT_ATTACHED 0x10 -#define LCD_ATTACHED 0x20 -#define TV_ATTACHED 0x40 - - -/* - * reads from SUBSYS_STAT - */ -#define STATUS_WORD0 (INREG(0x48C00)) -#define ALT_STATUS_WORD0 (INREG(0x48C60)) -#define MAXLOOP 0xffffff -#define IN_SUBSYS_STAT() (INREG(SUBSYS_STAT_REG)) - -#define MAXFIFO 0x7f00 - -/* - * NOTE: don't remove 'VGAIN8(vgaCRIndex);'. - * If not present it will cause lockups on Savage4. - * Ask S3, why. - */ -/*#define VerticalRetraceWait() \ -{ \ - VGAIN8(0x3d0+4); \ - VGAOUT8(0x3d0+4, 0x17); \ - if (VGAIN8(0x3d0+5) & 0x80) { \ - while ((VGAIN8(0x3d0 + 0x0a) & 0x08) == 0x08) ; \ - while ((VGAIN8(0x3d0 + 0x0a) & 0x08) == 0x00) ; \ - } \ -} -*/ - -#define VerticalRetraceWait() \ -do { \ - VGAIN8(0x3d4); \ - VGAOUT8(0x3d4, 0x17); \ - if (VGAIN8(0x3d5) & 0x80) { \ - int i = 0x10000; \ - while ((VGAIN8(0x3da) & 0x08) == 0x08 && i--) ; \ - i = 0x10000; \ - while ((VGAIN8(0x3da) & 0x08) == 0x00 && i--) ; \ - } \ -} while (0) - - -#define I2C_REG 0xa0 -#define InI2CREG(a) \ -{ \ - VGAOUT8(0x3d0 + 4, I2C_REG); \ - a = VGAIN8(0x3d0 + 5); \ -} - -#define OutI2CREG(a) \ -{ \ - VGAOUT8(0x3d0 + 4, I2C_REG); \ - VGAOUT8(0x3d0 + 5, a); \ -} - -#define HZEXP_COMP_1 0x54 -#define HZEXP_BORDER 0x58 -#define HZEXP_FACTOR_IGA1 0x59 - -#define VTEXP_COMP_1 0x56 -#define VTEXP_BORDER 0x5a -#define VTEXP_FACTOR_IGA1 0x5b - -#define EC1_CENTER_ON 0x10 -#define EC1_EXPAND_ON 0x0c - -#define MODE_24 24 - -#if (MODE_24 == 32) -# define BYTES_PP24 4 -#else -# define BYTES_PP24 3 -#endif - -#define OVERLAY_DEPTH 16 - -#define STREAMS_MODE32 0x7 -#define STREAMS_MODE24 0x6 -#define STREAMS_MODE16 0x5 /* @@@ */ - - -#define DEPTH_BPP(depth) (depth == 24 ? (BYTES_PP24 << 3) : (depth + 7) & ~0x7) -#define DEPTH_2ND(depth) (depth > 8 ? depth\ - : OVERLAY_DEPTH) -#define SSTREAMS_MODE(bpp) (bpp > 16 ? (bpp > 24 ? STREAMS_MODE32 :\ - STREAMS_MODE24) : STREAMS_MODE16) - -#define HSCALING_Shift 0 -#define HSCALING_Mask (((1L << 16)-1) << HSCALING_Shift) -#define HSCALING(w0,w1) ((((unsigned int)(((double)w0/(double)w1) * (1 << 15))) \ - << HSCALING_Shift) \ - & HSCALING_Mask) - -#define VSCALING_Shift 0 -#define VSCALING_Mask (((1L << 20)-1) << VSCALING_Shift) -#define VSCALING(h0,h1) ((((unsigned int) (((double)h0/(double)h1) * (1 << 15))) \ - << VSCALING_Shift) \ - & VSCALING_Mask) - - -#endif /* MPLAYER_SAVAGE_REGS_H */
--- a/vidix/savage_vid.c Fri Feb 29 20:02:37 2008 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1371 +0,0 @@ -/* - * VIDIX driver for S3 Savage chipsets. - * Copyright (C) 2004 Reza Jelveh - * - * This file is part of MPlayer. - * - * MPlayer is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * MPlayer is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with MPlayer; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - * - * Thanks to Alex Deucher for Support - */ - -#include <errno.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <inttypes.h> -#include <unistd.h> -#include <math.h> - -#include "vidix.h" -#include "vidixlib.h" -#include "fourcc.h" -#include "dha.h" -#include "pci_ids.h" -#include "pci_names.h" -#include "config.h" - -#include "savage_regs.h" - - -#define VF_STREAMS_ON 0x0001 -#define BASE_PAD 0xf -#define FRAMEBUFFER_SIZE 1024*2000*4 -/************************************** - S3 streams processor -**************************************/ - -#define EXT_MISC_CTRL2 0x67 - -/* New streams */ - -/* CR67[2] = 1 : enable stream 1 */ -#define ENABLE_STREAM1 0x04 -/* CR67[1] = 1 : enable stream 2 */ -#define ENABLE_STREAM2 0x02 -/* mask to clear CR67[2,1] */ -#define NO_STREAMS 0xF9 -/* CR67[3] = 1 : Mem-mapped regs */ -#define USE_MM_FOR_PRI_STREAM 0x08 - -#define HDM_SHIFT 16 -#define HDSCALE_4 (2 << HDM_SHIFT) -#define HDSCALE_8 (3 << HDM_SHIFT) -#define HDSCALE_16 (4 << HDM_SHIFT) -#define HDSCALE_32 (5 << HDM_SHIFT) -#define HDSCALE_64 (6 << HDM_SHIFT) - -/* Old Streams */ - -#define ENABLE_STREAMS_OLD 0x0c -#define NO_STREAMS_OLD 0xf3 -/* CR69[0] = 1 : Mem-mapped regs */ -#define USE_MM_FOR_PRI_STREAM_OLD 0x01 - -static void SavageStreamsOn(void); - -/* - * There are two different streams engines used in the Savage line. - * The old engine is in the 3D, 4, Pro, and Twister. - * The new engine is in the 2000, MX, IX, and Super. - */ - - -/* streams registers for old engine */ -#define PSTREAM_CONTROL_REG 0x8180 -#define COL_CHROMA_KEY_CONTROL_REG 0x8184 -#define SSTREAM_CONTROL_REG 0x8190 -#define CHROMA_KEY_UPPER_BOUND_REG 0x8194 -#define SSTREAM_STRETCH_REG 0x8198 -#define COLOR_ADJUSTMENT_REG 0x819C -#define BLEND_CONTROL_REG 0x81A0 -#define PSTREAM_FBADDR0_REG 0x81C0 -#define PSTREAM_FBADDR1_REG 0x81C4 -#define PSTREAM_STRIDE_REG 0x81C8 -#define DOUBLE_BUFFER_REG 0x81CC -#define SSTREAM_FBADDR0_REG 0x81D0 -#define SSTREAM_FBADDR1_REG 0x81D4 -#define SSTREAM_STRIDE_REG 0x81D8 -#define SSTREAM_VSCALE_REG 0x81E0 -#define SSTREAM_VINITIAL_REG 0x81E4 -#define SSTREAM_LINES_REG 0x81E8 -#define STREAMS_FIFO_REG 0x81EC -#define PSTREAM_WINDOW_START_REG 0x81F0 -#define PSTREAM_WINDOW_SIZE_REG 0x81F4 -#define SSTREAM_WINDOW_START_REG 0x81F8 -#define SSTREAM_WINDOW_SIZE_REG 0x81FC -#define FIFO_CONTROL 0x8200 -#define PSTREAM_FBSIZE_REG 0x8300 -#define SSTREAM_FBSIZE_REG 0x8304 -#define SSTREAM_FBADDR2_REG 0x8308 - -#define OS_XY(x,y) (((x+1)<<16)|(y+1)) -#define OS_WH(x,y) (((x-1)<<16)|(y)) - -#define PCI_COMMAND_MEM 0x2 -#define MAX_FRAMES 3 -/** - * @brief Information on PCI device. - */ -static pciinfo_t pci_info; - -#define outb(reg,val) OUTPORT8(reg,val) -#define inb(reg) INPORT8(reg) -#define outw(reg,val) OUTPORT16(reg,val) -#define inw(reg) INPORT16(reg) -#define outl(reg,val) OUTPORT32(reg,val) -#define inl(reg) INPORT32(reg) - - -/* - * PCI-Memory IO access macros. - */ -#define VID_WR08(p,i,val) (((uint8_t *)(p))[(i)]=(val)) -#define VID_RD08(p,i) (((uint8_t *)(p))[(i)]) - -#define VID_WR32(p,i,val) (((uint32_t *)(p))[(i)/4]=(val)) -#define VID_RD32(p,i) (((uint32_t *)(p))[(i)/4]) - -#ifndef USE_RMW_CYCLES -/* - * Can be used to inhibit READ-MODIFY-WRITE cycles. On by default. - */ - -#define MEM_BARRIER() __asm__ __volatile__ ("" : : : "memory") - -#undef VID_WR08 -#define VID_WR08(p,i,val) ({ MEM_BARRIER(); ((uint8_t *)(p))[(i)]=(val); }) -#undef VID_RD08 -#define VID_RD08(p,i) ({ MEM_BARRIER(); ((uint8_t *)(p))[(i)]; }) - -#undef VID_WR16 -#define VID_WR16(p,i,val) ({ MEM_BARRIER(); ((uint16_t *)(p))[(i)/2]=(val); }) -#undef VID_RD16 -#define VID_RD16(p,i) ({ MEM_BARRIER(); ((uint16_t *)(p))[(i)/2]; }) - -#undef VID_WR32 -#define VID_WR32(p,i,val) ({ MEM_BARRIER(); ((uint32_t *)(p))[(i)/4]=(val); }) -#undef VID_RD32 -#define VID_RD32(p,i) ({ MEM_BARRIER(); ((uint32_t *)(p))[(i)/4]; }) -#endif /* USE_RMW_CYCLES */ - -#define VID_AND32(p,i,val) VID_WR32(p,i,VID_RD32(p,i)&(val)) -#define VID_OR32(p,i,val) VID_WR32(p,i,VID_RD32(p,i)|(val)) -#define VID_XOR32(p,i,val) VID_WR32(p,i,VID_RD32(p,i)^(val)) - - -/* from x driver */ - -#define VGAIN8(addr) VID_RD08(info->control_base+0x8000, addr) -#define VGAIN16(addr) VID_RD16(info->control_base+0x8000, addr) -#define VGAIN(addr) VID_RD32(info->control_base+0x8000, addr) - -#define VGAOUT8(addr,val) VID_WR08(info->control_base+0x8000, addr, val) -#define VGAOUT16(addr,val) VID_WR16(info->control_base+0x8000, addr, val) -#define VGAOUT(addr,val) VID_WR32(info->control_base+0x8000, addr, val) - -#define INREG(addr) VID_RD32(info->control_base, addr) -#define OUTREG(addr,val) VID_WR32(info->control_base, addr, val) -#define INREG8(addr) VID_RD08(info->control_base, addr) -#define OUTREG8(addr,val) VID_WR08(info->control_base, addr, val) -#define INREG16(addr) VID_RD16(info->control_base, addr) -#define OUTREG16(addr,val) VID_WR16(info->control_base, addr, val) - -#define ALIGN_TO(v, n) (((v) + (n-1)) & ~(n-1)) - - -static void debugout(unsigned int addr, unsigned int val); - - -struct savage_chip { - volatile uint32_t *PMC; /* general control */ - volatile uint32_t *PME; /* multimedia port */ - volatile uint32_t *PFB; /* framebuffer control */ - volatile uint32_t *PVIDEO; /* overlay control */ - volatile uint8_t *PCIO; /* SVGA (CRTC, ATTR) registers */ - volatile uint8_t *PVIO; /* SVGA (MISC, GRAPH, SEQ) registers */ - volatile uint32_t *PRAMIN; /* instance memory */ - volatile uint32_t *PRAMHT; /* hash table */ - volatile uint32_t *PRAMFC; /* fifo context table */ - volatile uint32_t *PRAMRO; /* fifo runout table */ - volatile uint32_t *PFIFO; /* fifo control region */ - volatile uint32_t *FIFO; /* fifo channels (USER) */ - volatile uint32_t *PGRAPH; /* graphics engine */ - - int arch; /* compatible NV_ARCH_XX define */ - unsigned long fbsize; /* framebuffer size */ - void (* lock) (struct savage_chip *, int); -}; -typedef struct savage_chip savage_chip; - - -struct savage_info { - unsigned int use_colorkey; - unsigned int colorkey; /* saved xv colorkey*/ - unsigned int vidixcolorkey; /*currently used colorkey*/ - unsigned int depth; - unsigned int bpp; - unsigned int videoFlags; - unsigned int format; - unsigned int pitch; - unsigned int blendBase; - unsigned int lastKnownPitch; - unsigned int displayWidth, displayHeight; - unsigned int brightness,hue,saturation,contrast; - unsigned int src_w,src_h; - unsigned int drw_w,drw_h; /*scaled width && height*/ - unsigned int wx,wy; /*window x && y*/ - unsigned int screen_x; /*screen width*/ - unsigned int screen_y; /*screen height*/ - unsigned long frame_size; /* frame size */ - struct savage_chip chip; /* NV architecture structure */ - void* video_base; /* virtual address of control region */ - void* control_base; /* virtual address of fb region */ - unsigned long picture_base; /* direct pointer to video picture */ - unsigned long picture_offset; /* offset of video picture in frame buffer */ -// struct savage_dma dma; /* DMA structure */ - unsigned int num_frames; /* number of buffers */ - int bps; /* bytes per line */ - void (*SavageWaitIdle) (); - void (*SavageWaitFifo) (int space); -}; -typedef struct savage_info savage_info; - - -static savage_info* info; - - -/** - * @brief Unichrome driver vidix capabilities. - */ -static vidix_capability_t savage_cap = { - "Savage/ProSavage/Twister vidix", - "Reza Jelveh <reza.jelveh@tuhh.de>", - TYPE_OUTPUT, - {0, 0, 0, 0}, - 4096, - 4096, - 4, - 4, - -1, - FLAG_UPSCALER | FLAG_DOWNSCALER, - VENDOR_S3_INC, - -1, - {0, 0, 0, 0} -}; - -struct savage_cards { - unsigned short chip_id; - unsigned short arch; -}; - - -static -unsigned int GetBlendForFourCC( int id ) -{ - switch( id ) { - case IMGFMT_UYVY: - return 0; - case IMGFMT_YUY2: - return 1; - case IMGFMT_Y211: - return 4; - case IMGFMT_BGR15: - return 3; - case IMGFMT_BGR16: - return 5; - case IMGFMT_BGR24: - return 6; - case IMGFMT_BGR32: - return 7; - default: - return 1; - } -} - -/** - * @brief list of card IDs compliant with the Unichrome driver . - */ -static struct savage_cards savage_card_ids[] = { - /* Savage3D */ - { DEVICE_S3_INC_86C794_SAVAGE_3D, S3_SAVAGE3D }, - { DEVICE_S3_INC_86C390_SAVAGE_3D_MV, S3_SAVAGE3D }, - /* Savage4 */ - { DEVICE_S3_INC_SAVAGE_4, S3_SAVAGE4 }, - { DEVICE_S3_INC_SAVAGE_42, S3_SAVAGE4 }, - /* SavageMX */ - { DEVICE_S3_INC_86C270_294_SAVAGE_MX_MV, S3_SAVAGE_MX }, - { DEVICE_S3_INC_82C270_294_SAVAGE_MX, S3_SAVAGE_MX }, - { DEVICE_S3_INC_86C270_294_SAVAGE_IX_MV, S3_SAVAGE_MX }, - /* SuperSavage */ - { DEVICE_S3_INC_SUPERSAVAGE_MX_128, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_MX_64, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_MX_64C, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_IX_128_SDR, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_IX_128_DDR, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_IX_64_SDR, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_IX_64_DDR, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_IX_C_SDR, S3_SUPERSAVAGE }, - { DEVICE_S3_INC_SUPERSAVAGE_IX_C_DDR, S3_SUPERSAVAGE }, - /* ProSavage */ - { DEVICE_S3_INC_PROSAVAGE_PM133, S3_PROSAVAGE }, - { DEVICE_S3_INC_PROSAVAGE_KM133, S3_PROSAVAGE }, - { DEVICE_S3_INC_86C380_PROSAVAGEDDR_K4M266, S3_PROSAVAGE }, - { DEVICE_S3_INC_VT8636A_PROSAVAGE_KN133, S3_PROSAVAGE }, - { DEVICE_S3_INC_VT8751_PROSAVAGEDDR_P4M266, S3_PROSAVAGE }, - { DEVICE_S3_INC_VT8375_PROSAVAGE8_KM266_KL266, S3_PROSAVAGE }, - /* Savage2000 */ - { DEVICE_S3_INC_86C410_SAVAGE_2000, S3_SAVAGE2000 }, -}; - -static void SavageSetColorOld(void) -{ - - - if( - (info->format == IMGFMT_BGR15) || - (info->format == IMGFMT_BGR16) - ) - { - OUTREG( COLOR_ADJUSTMENT_REG, 0 ); - } - else - { - /* Change 0..255 into 0..15 */ - long sat = info->saturation * 16 / 256; - double hue = info->hue * 0.017453292; - unsigned long hs1 = ((long)(sat * cos(hue))) & 0x1f; - unsigned long hs2 = ((long)(sat * sin(hue))) & 0x1f; - - OUTREG( COLOR_ADJUSTMENT_REG, - 0x80008000 | - (info->brightness + 128) | - ((info->contrast & 0xf8) << (12-7)) | - (hs1 << 16) | - (hs2 << 24) - ); - debugout( COLOR_ADJUSTMENT_REG, - 0x80008000 | - (info->brightness + 128) | - ((info->contrast & 0xf8) << (12-7)) | - (hs1 << 16) | - (hs2 << 24) - ); - - } -} - -static void SavageSetColorKeyOld(void) -{ - int red, green, blue; - - /* Here, we reset the colorkey and all the controls. */ - - red = (info->vidixcolorkey & 0x00FF0000) >> 16; - green = (info->vidixcolorkey & 0x0000FF00) >> 8; - blue = info->vidixcolorkey & 0x000000FF; - - if( !info->vidixcolorkey ) { - printf("SavageSetColorKey disabling colorkey\n"); - OUTREG( COL_CHROMA_KEY_CONTROL_REG, 0 ); - OUTREG( CHROMA_KEY_UPPER_BOUND_REG, 0 ); - OUTREG( BLEND_CONTROL_REG, 0 ); - } - else { - switch (info->depth) { - // FIXME: isnt fixed yet - case 8: - OUTREG( COL_CHROMA_KEY_CONTROL_REG, - 0x37000000 | (info->vidixcolorkey & 0xFF) ); - OUTREG( CHROMA_KEY_UPPER_BOUND_REG, - 0x00000000 | (info->vidixcolorkey & 0xFF) ); - break; - case 15: - /* 15 bpp 555 */ - red&=0x1f; - green&=0x1f; - blue&=0x1f; - OUTREG( COL_CHROMA_KEY_CONTROL_REG, - 0x05000000 | (red<<19) | (green<<11) | (blue<<3) ); - OUTREG( CHROMA_KEY_UPPER_BOUND_REG, - 0x00000000 | (red<<19) | (green<<11) | (blue<<3) ); - break; - case 16: - /* 16 bpp 565 */ - red&=0x1f; - green&=0x3f; - blue&=0x1f; - OUTREG( COL_CHROMA_KEY_CONTROL_REG, - 0x16000000 | (red<<19) | (green<<10) | (blue<<3) ); - OUTREG( CHROMA_KEY_UPPER_BOUND_REG, - 0x00020002 | (red<<19) | (green<<10) | (blue<<3) ); - break; - case 24: - /* 24 bpp 888 */ - OUTREG( COL_CHROMA_KEY_CONTROL_REG, - 0x17000000 | (red<<16) | (green<<8) | (blue) ); - OUTREG( CHROMA_KEY_UPPER_BOUND_REG, - 0x00000000 | (red<<16) | (green<<8) | (blue) ); - break; - } - - /* We use destination colorkey */ - OUTREG( BLEND_CONTROL_REG, 0x05000000 ); - } -} - - -static void -SavageDisplayVideoOld(void) -{ - int vgaCRIndex, vgaCRReg, vgaIOBase; - unsigned int ssControl; - int cr92; - - - vgaIOBase = 0x3d0; - vgaCRIndex = vgaIOBase + 4; - vgaCRReg = vgaIOBase + 5; - -// if( psav->videoFourCC != id ) -// SavageStreamsOff(pScrn); - - if( !info->videoFlags & VF_STREAMS_ON ) - { - SavageStreamsOn(); - // SavageResetVideo(); - SavageSetColorOld(); - SavageSetColorKeyOld(); - } - - - - - /* Calculate horizontal scale factor. */ - - //FIXME: enable scaling - OUTREG(SSTREAM_STRETCH_REG, (info->src_w << 15) / info->drw_w ); -// debugout(SSTREAM_STRETCH_REG, 1 << 15); - - OUTREG(SSTREAM_LINES_REG, info->src_h ); - debugout(SSTREAM_LINES_REG, info->src_h ); - - - OUTREG(SSTREAM_VINITIAL_REG, 0 ); - debugout(SSTREAM_VINITIAL_REG, 0 ); - /* Calculate vertical scale factor. */ - -// OUTREG(SSTREAM_VSCALE_REG, 1 << 15); - OUTREG(SSTREAM_VSCALE_REG, VSCALING(info->src_h,info->drw_h) ); - debugout(SSTREAM_VSCALE_REG, VSCALING(info->src_h,info->drw_h) ); -// OUTREG(SSTREAM_VSCALE_REG, (info->src_h << 15) / info->drw_h ); - - /* Set surface location and stride. */ - - OUTREG(SSTREAM_FBADDR0_REG, info->picture_offset ); - debugout(SSTREAM_FBADDR0_REG, info->picture_offset ); - - OUTREG(SSTREAM_FBADDR1_REG, 0 ); - debugout(SSTREAM_FBADDR1_REG, 0 ); - - OUTREG(SSTREAM_STRIDE_REG, info->pitch ); - debugout(SSTREAM_STRIDE_REG, info->pitch ); - - OUTREG(SSTREAM_WINDOW_START_REG, OS_XY(info->wx, info->wy) ); - debugout(SSTREAM_WINDOW_START_REG, OS_XY(info->wx, info->wy) ); - OUTREG(SSTREAM_WINDOW_SIZE_REG, OS_WH(info->drw_w, info->drw_h) ); - debugout(SSTREAM_WINDOW_SIZE_REG, OS_WH(info->drw_w, info->drw_h) ); - - /* Set surface format and adjust scaling */ - - ssControl = GetBlendForFourCC(info->format) << 24 | info->src_w; - - if( info->src_w > (info->drw_w << 1) ) - { - /* BUGBUG shouldn't this be >=? */ - if( info->src_w <= (info->drw_w << 2) ) - ssControl |= HDSCALE_4; - else if( info->src_w > (info->drw_w << 3) ) - ssControl |= HDSCALE_8; - else if( info->src_w > (info->drw_w << 4) ) - ssControl |= HDSCALE_16; - else if( info->src_w > (info->drw_w << 5) ) - ssControl |= HDSCALE_32; - else if( info->src_w > (info->drw_w << 6) ) - ssControl |= HDSCALE_64; - } - - OUTREG(SSTREAM_CONTROL_REG, ssControl); - debugout(SSTREAM_CONTROL_REG, ssControl); - - // FIXME: this should actually be enabled - - info->pitch = (info->pitch + 7) / 8; - VGAOUT8(vgaCRIndex, 0x92); - cr92 = VGAIN8(vgaCRReg); - VGAOUT8(vgaCRReg, (cr92 & 0x40) | (info->pitch >> 8) | 0x80); - VGAOUT8(vgaCRIndex, 0x93); - VGAOUT8(vgaCRReg, info->pitch); - OUTREG(STREAMS_FIFO_REG, 2 | 25 << 5 | 32 << 11); - - - - -} - -static void SavageInitStreamsOld(void) -{ - /*unsigned long jDelta;*/ - unsigned long format = 0; - - /* - * For the OLD streams engine, several of these registers - * cannot be touched unless streams are on. Seems backwards to me; - * I'd want to set 'em up, then cut 'em loose. - */ - - - /*jDelta = pScrn->displayWidth * (pScrn->bitsPerPixel + 7) / 8;*/ - switch( info->depth ) { - case 8: format = 0 << 24; break; - case 15: format = 3 << 24; break; - case 16: format = 5 << 24; break; - case 24: format = 7 << 24; break; - } - /* FIXME: enable this again */ - OUTREG(PSTREAM_FBSIZE_REG, - info->screen_y * info->screen_x * (info->bpp >> 3)); - - OUTREG( PSTREAM_WINDOW_START_REG, OS_XY(0,0) ); - OUTREG( PSTREAM_WINDOW_SIZE_REG, OS_WH(info->screen_x, info->screen_y) ); - OUTREG( PSTREAM_FBADDR1_REG, 0 ); - /*OUTREG( PSTREAM_STRIDE_REG, jDelta );*/ - OUTREG( PSTREAM_CONTROL_REG, format ); - OUTREG( PSTREAM_FBADDR0_REG, 0 ); - - /*OUTREG( PSTREAM_FBSIZE_REG, jDelta * pScrn->virtualY >> 3 );*/ - - OUTREG( COL_CHROMA_KEY_CONTROL_REG, 0 ); - OUTREG( SSTREAM_CONTROL_REG, 0 ); - OUTREG( CHROMA_KEY_UPPER_BOUND_REG, 0 ); - OUTREG( SSTREAM_STRETCH_REG, 0 ); - OUTREG( COLOR_ADJUSTMENT_REG, 0 ); - OUTREG( BLEND_CONTROL_REG, 1 << 24 ); - OUTREG( DOUBLE_BUFFER_REG, 0 ); - OUTREG( SSTREAM_FBADDR0_REG, 0 ); - OUTREG( SSTREAM_FBADDR1_REG, 0 ); - OUTREG( SSTREAM_FBADDR2_REG, 0 ); - OUTREG( SSTREAM_FBSIZE_REG, 0 ); - OUTREG( SSTREAM_STRIDE_REG, 0 ); - OUTREG( SSTREAM_VSCALE_REG, 0 ); - OUTREG( SSTREAM_LINES_REG, 0 ); - OUTREG( SSTREAM_VINITIAL_REG, 0 ); - /* FIXME: Is this needed? */ - OUTREG( SSTREAM_WINDOW_START_REG, OS_XY(0xfffe, 0xfffe) ); - OUTREG( SSTREAM_WINDOW_SIZE_REG, OS_WH(10,2) ); - -} - -static void -SavageStreamsOn(void) -{ - unsigned char jStreamsControl; - unsigned short vgaCRIndex = 0x3d0 + 4; - unsigned short vgaCRReg = 0x3d0 + 5; - -// xf86ErrorFVerb(STREAMS_TRACE, "SavageStreamsOn\n" ); - - /* Sequence stolen from streams.c in M7 NT driver */ - - - enable_app_io (); - - VGAOUT8( vgaCRIndex, EXT_MISC_CTRL2 ); - - if( S3_SAVAGE_MOBILE_SERIES(info->chip.arch) ) - { -// SavageInitStreamsNew( pScrn ); - - jStreamsControl = VGAIN8( vgaCRReg ) | ENABLE_STREAM1; - - /* Wait for VBLANK. */ - VerticalRetraceWait(); - /* Fire up streams! */ - VGAOUT16( vgaCRIndex, (jStreamsControl << 8) | EXT_MISC_CTRL2 ); - /* These values specify brightness, contrast, saturation and hue. */ - OUTREG( SEC_STREAM_COLOR_CONVERT1, 0x0000C892 ); - OUTREG( SEC_STREAM_COLOR_CONVERT2, 0x00039F9A ); - OUTREG( SEC_STREAM_COLOR_CONVERT3, 0x01F1547E ); - } - else if (info->chip.arch == S3_SAVAGE2000) - { -// SavageInitStreams2000( pScrn ); - - jStreamsControl = VGAIN8( vgaCRReg ) | ENABLE_STREAM1; - - /* Wait for VBLANK. */ - VerticalRetraceWait(); - /* Fire up streams! */ - VGAOUT16( vgaCRIndex, (jStreamsControl << 8) | EXT_MISC_CTRL2 ); - /* These values specify brightness, contrast, saturation and hue. */ - OUTREG( SEC_STREAM_COLOR_CONVERT0_2000, 0x0000C892 ); - OUTREG( SEC_STREAM_COLOR_CONVERT1_2000, 0x00033400 ); - OUTREG( SEC_STREAM_COLOR_CONVERT2_2000, 0x000001CF ); - OUTREG( SEC_STREAM_COLOR_CONVERT3_2000, 0x01F1547E ); - } - else - { - jStreamsControl = VGAIN8( vgaCRReg ) | ENABLE_STREAMS_OLD; - - /* Wait for VBLANK. */ - - VerticalRetraceWait(); - - /* Fire up streams! */ - - VGAOUT16( vgaCRIndex, (jStreamsControl << 8) | EXT_MISC_CTRL2 ); - - SavageInitStreamsOld( ); - } - - /* Wait for VBLANK. */ - - VerticalRetraceWait(); - - /* Turn on secondary stream TV flicker filter, once we support TV. */ - - /* SR70 |= 0x10 */ - - info->videoFlags |= VF_STREAMS_ON; - -} - - - - -static void savage_getscreenproperties(struct savage_info *info){ - unsigned char bpp=0; - - uint32_t vgaIOBase, vgaCRIndex, vgaCRReg; - - vgaIOBase = 0x3d0; - vgaCRIndex = vgaIOBase + 4; - vgaCRReg = vgaIOBase + 5; - - - /* a little reversed from x driver source code */ - VGAOUT8(vgaCRIndex, 0x67); - bpp = VGAIN8(vgaCRReg); - - - switch (bpp&0xf0) { - case 0x00: - case 0x10: - info->depth=8; - info->bpp=8; - break; - case 0x20: - case 0x30: - info->depth=15; - info->bpp=16; - break; - case 0x40: - case 0x50: - info->depth=16; - info->bpp=16; - break; - case 0x70: - case 0xd0: - info->depth=24; - info->bpp=32; - break; - - - } - - - VGAOUT8(vgaCRIndex, 0x1); - info->screen_x = (1 + VGAIN8(vgaCRReg)) <<3; - /*get screen height*/ - /* get first 8 bits in VT_DISPLAY_END*/ - VGAOUT8(0x03D4, 0x12); - info->screen_y = VGAIN8(0x03D5); - VGAOUT8(0x03D4,0x07); - /* get 9th bit in CRTC_OVERFLOW*/ - info->screen_y |= (VGAIN8(0x03D5) &0x02)<<7; - /* and the 10th in CRTC_OVERFLOW*/ - info->screen_y |=(VGAIN8(0x03D5) &0x40)<<3; - ++info->screen_y; - - printf("screen_x = %d, screen_y = %d, bpp = %d\n",info->screen_x,info->screen_y,info->bpp); -} - - -static void SavageStreamsOff(void) -{ - unsigned char jStreamsControl; - unsigned short vgaCRIndex = 0x3d0 + 4; - unsigned short vgaCRReg = 0x3d0 + 5; - - VGAOUT8( vgaCRIndex, EXT_MISC_CTRL2 ); - if( S3_SAVAGE_MOBILE_SERIES(info->chip.arch) || - (info->chip.arch == S3_SUPERSAVAGE) || - (info->chip.arch == S3_SAVAGE2000) ) - jStreamsControl = VGAIN8( vgaCRReg ) & NO_STREAMS; - else - jStreamsControl = VGAIN8( vgaCRReg ) & NO_STREAMS_OLD; - - /* Wait for VBLANK. */ - - VerticalRetraceWait(); - - /* Kill streams. */ - - VGAOUT16(vgaCRIndex, (jStreamsControl << 8) | EXT_MISC_CTRL2 ); - - VGAOUT16(vgaCRIndex, 0x0093 ); - VGAOUT8( vgaCRIndex, 0x92 ); - VGAOUT8( vgaCRReg, VGAIN8(vgaCRReg) & 0x40 ); - - info->videoFlags &= ~VF_STREAMS_ON; -} - -/** - * @brief Find chip index in Unichrome compliant devices list. - * - * @param chip_id PCI device ID. - * - * @returns index position in savage_card_ids if successful. - * -1 if chip_id is not a compliant chipset ID. - */ - -static int find_chip(unsigned chip_id){ - unsigned i; - for(i = 0;i < sizeof(savage_card_ids)/sizeof(struct savage_cards);i++) - { - if(chip_id == savage_card_ids[i].chip_id)return i; - } - return -1; -} - -/** - * @brief Probe hardware to find some useable chipset. - * - * @param verbose specifies verbose level. - * @param force specifies force mode : driver should ignore - * device_id (danger but useful for new devices) - * - * @returns 0 if it can handle something in PC. - * a negative error code otherwise. - */ - -static int savage_probe(int verbose, int force){ - pciinfo_t lst[MAX_PCI_DEVICES]; - unsigned i,num_pci; - int err; - - if (force) - printf("[savage_vid]: warning: forcing not supported yet!\n"); - err = pci_scan(lst,&num_pci); - if(err){ - printf("[savage_vid] Error occurred during pci scan: %s\n",strerror(err)); - return err; - } - else { - err = ENXIO; - for(i=0; i < num_pci; i++){ - if(lst[i].vendor == VENDOR_S3_INC) { - int idx; - const char *dname; - idx = find_chip(lst[i].device); - if(idx == -1) - continue; - dname = pci_device_name(lst[i].vendor, lst[i].device); - dname = dname ? dname : "Unknown chip"; - printf("[savage_vid] Found chip: %s\n", dname); - // FIXME: whats wrong here? - if ((lst[i].command & PCI_COMMAND_IO ) == 0){ - printf("[savage_vid] Device is disabled, ignoring\n"); - continue; - } - savage_cap.device_id = lst[i].device; - err = 0; - memcpy(&pci_info, &lst[i], sizeof(pciinfo_t)); - break; - } - } - } - if(err && verbose) printf("[savage_vid] Can't find chip\n"); - return err; -} - -/** - * @brief Initializes driver. - * - * @returns 0 if ok. - * a negative error code otherwise. - */ -static int -savage_init (void) -{ - int mtrr; - unsigned char config1, tmp; - - static unsigned char RamSavage3D[] = { 8, 4, 4, 2 }; - static unsigned char RamSavage4[] = { 2, 4, 8, 12, 16, 32, 64, 32 }; - static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 }; - static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 16, 2 }; - - int videoRam; - - uint32_t vgaIOBase, vgaCRIndex, vgaCRReg ; - - unsigned char val; - - vgaIOBase = 0x3d0; - vgaCRIndex = vgaIOBase + 4; - vgaCRReg = vgaIOBase + 5; - - fprintf(stderr, "vixInit enter \n"); -// //getc(stdin); - - info = calloc(1,sizeof(savage_info)); - - - /* need this if we want direct outb and inb access? */ - enable_app_io (); - - /* 12mb + 32kb ? */ - /* allocate some space for control registers */ - info->chip.arch = savage_card_ids[find_chip(pci_info.device)].arch; - - if (info->chip.arch == S3_SAVAGE3D) { - info->control_base = map_phys_mem(pci_info.base0+SAVAGE_NEWMMIO_REGBASE_S3, SAVAGE_NEWMMIO_REGSIZE); - } - else { - info->control_base = map_phys_mem(pci_info.base0+SAVAGE_NEWMMIO_REGBASE_S4, SAVAGE_NEWMMIO_REGSIZE); - } - -// info->chip.PCIO = (uint8_t *) (info->control_base + SAVAGE_NEWMMIO_VGABASE); - - /* switch to vga registers */ - val = VGAIN8 (0x3c3); - VGAOUT8 (0x3c3, val | 0x01); - val = VGAIN8 (0x3cc); - VGAOUT8 (0x3c2, val | 0x01); - - /* unprotect CRTC[0-7] */ - VGAOUT8(vgaCRIndex, 0x11); - tmp = VGAIN8(vgaCRReg); -// printf("$########## tmp = %d\n",tmp); - VGAOUT8(vgaCRReg, tmp & 0x7f); - - - /* unlock extended regs */ - VGAOUT16(vgaCRIndex, 0x4838); - VGAOUT16(vgaCRIndex, 0xa039); - VGAOUT16(0x3c4, 0x0608); - - /* Next go on to detect amount of installed ram */ - - VGAOUT8(vgaCRIndex, 0x36); /* for register CR36 (CONFG_REG1), */ - config1 = VGAIN8(vgaCRReg); /* get amount of vram installed */ - - - switch( info->chip.arch ) { - case S3_SAVAGE3D: - videoRam = RamSavage3D[ (config1 & 0xC0) >> 6 ] * 1024; - break; - - case S3_SAVAGE4: - /* - * The Savage4 has one ugly special case to consider. On - * systems with 4 banks of 2Mx32 SDRAM, the BIOS says 4MB - * when it really means 8MB. Why do it the same when you - * can do it different... - */ - VGAOUT8(0x3d4, 0x68); /* memory control 1 */ - if( (VGAIN8(0x3d5) & 0xC0) == (0x01 << 6) ) - RamSavage4[1] = 8; - - /*FALLTHROUGH*/ - - case S3_SAVAGE2000: - videoRam = RamSavage4[ (config1 & 0xE0) >> 5 ] * 1024; - break; - - case S3_SAVAGE_MX: - videoRam = RamSavageMX[ (config1 & 0x0E) >> 1 ] * 1024; - break; - - case S3_PROSAVAGE: - videoRam = RamSavageNB[ (config1 & 0xE0) >> 5 ] * 1024; - break; - - default: - /* How did we get here? */ - videoRam = 0; - break; - } - - - printf("###### videoRam = %d\n",videoRam); - info->chip.fbsize = videoRam * 1024; - - - /* reset graphics engine to avoid memory corruption */ -/* VGAOUT8 (0x3d4, 0x66); - cr66 = VGAIN8 (0x3d5); - VGAOUT8 (0x3d5, cr66 | 0x02); - udelay (10000); - - VGAOUT8 (0x3d4, 0x66); - VGAOUT8 (0x3d5, cr66 & ~0x02); */ // clear reset flag - /* udelay (10000); */ - - if ( info->chip.arch == S3_SAVAGE3D ){ - mtrr = mtrr_set_type(pci_info.base0, info->chip.fbsize, MTRR_TYPE_WRCOMB); - } - else{ - mtrr = mtrr_set_type(pci_info.base1, info->chip.fbsize, MTRR_TYPE_WRCOMB); - } - - if (mtrr!= 0) - printf("[savage_vid] unable to setup MTRR: %s\n", strerror(mtrr)); - else - printf("[savage_vid] MTRR set up\n"); - - /* This may trash your screen for resolutions greater than 1024x768, sorry. */ - - - savage_getscreenproperties(info); -// return -1; - info->videoFlags = 0; - - SavageStreamsOn(); - //getc(stdin); - //FIXME ADD - return 0; -} - -/** - * @brief Destroys driver. - */ -static void -savage_destroy (void) -{ - unmap_phys_mem(info->video_base, info->chip.fbsize); - unmap_phys_mem(info->control_base, SAVAGE_NEWMMIO_REGSIZE); - //FIXME ADD -} - -/** - * @brief Get chipset's hardware capabilities. - * - * @param to Pointer to the vidix_capability_t structure to be filled. - * - * @returns 0. - */ -static int -savage_get_caps (vidix_capability_t * to) -{ - memcpy (to, &savage_cap, sizeof (vidix_capability_t)); - return 0; -} - -/** - * @brief Report if the video FourCC is supported by hardware. - * - * @param fourcc input image format. - * - * @returns 1 if the fourcc is supported. - * 0 otherwise. - */ -static int -is_supported_fourcc (uint32_t fourcc) -{ - switch (fourcc) - { -//FIXME: YV12 isnt working properly yet -// case IMGFMT_YV12: -// case IMGFMT_I420: - case IMGFMT_UYVY: - case IMGFMT_YUY2: - case IMGFMT_Y211: - case IMGFMT_RGB15: - case IMGFMT_RGB16: - case IMGFMT_BGR24: - case IMGFMT_BGR32: - return 1; - default: - return 0; - } -} - -/** - * @brief Try to configure video memory for given fourcc. - * - * @param to Pointer to the vidix_fourcc_t structure to be filled. - * - * @returns 0 if ok. - * errno otherwise. - */ -static int -savage_query_fourcc (vidix_fourcc_t * to) -{ - if (is_supported_fourcc (to->fourcc)) - { - to->depth = VID_DEPTH_ALL; - to->flags = VID_CAP_EXPAND | VID_CAP_SHRINK | VID_CAP_COLORKEY; - return 0; - } - else - to->depth = to->flags = 0; - - return ENOSYS; -} - -/** - * @brief Get the GrKeys - * - * @param grkey Pointer to the vidix_grkey_t structure to be filled by driver. - * - * @return 0. - */ -/*int -vixGetGrKeys (vidix_grkey_t * grkey) -{ - -// if(info->d_width && info->d_height)savage_overlay_start(info,0); - - return (0); -} - * */ - -/** - * @brief Set the GrKeys - * - * @param grkey Colorkey to be set. - * - * @return 0. - */ -static int -savage_set_gkeys (const vidix_grkey_t * grkey) -{ - if (grkey->ckey.op == CKEY_FALSE) - { - info->use_colorkey = 0; - info->vidixcolorkey=0; - printf("[savage_vid] colorkeying disabled\n"); - } - else { - info->use_colorkey = 1; - info->vidixcolorkey = ((grkey->ckey.red<<16)|(grkey->ckey.green<<8)|grkey->ckey.blue); - - printf("[savage_vid] set colorkey 0x%x\n",info->vidixcolorkey); - } - //FIXME: freezes if streams arent enabled - SavageSetColorKeyOld(); - return (0); -} - -/** - * @brief Unichrome driver equalizer capabilities. - */ -static vidix_video_eq_t equal = { - VEQ_CAP_BRIGHTNESS | VEQ_CAP_SATURATION | VEQ_CAP_HUE, - 300, 100, 0, 0, 0, 0, 0, 0 -}; - - -/** - * @brief Get the equalizer capabilities. - * - * @param eq Pointer to the vidix_video_eq_t structure to be filled by driver. - * - * @return 0. - */ -static int -savage_get_eq (vidix_video_eq_t * eq) -{ - memcpy (eq, &equal, sizeof (vidix_video_eq_t)); - return 0; -} - -/** - * @brief Set the equalizer capabilities for color correction - * - * @param eq equalizer capabilities to be set. - * - * @return 0. - */ -static int -savage_set_eq (const vidix_video_eq_t * eq) -{ - return 0; -} - -/** - * @brief Configure driver for playback. Driver should prepare BES. - * - * @param info configuration description for playback. - * - * @returns 0 in case of success. - * -1 otherwise. - */ -static int -savage_config_playback (vidix_playback_t * vinfo) -{ - unsigned int i, bpp; - - if (!is_supported_fourcc (vinfo->fourcc)) - return -1; - - - - info->src_w = vinfo->src.w; - info->src_h = vinfo->src.h; - - info->drw_w = vinfo->dest.w; - info->drw_h = vinfo->dest.h; - - info->wx = vinfo->dest.x; - info->wy = vinfo->dest.y; - info->format = vinfo->fourcc; - - info->lastKnownPitch = 0; - info->brightness = 0; - info->contrast = 128; - info->saturation = 128; - info->hue = 0; - - vinfo->offset.y = 0; - vinfo->offset.v = 0; - vinfo->offset.u = 0; - - vinfo->dest.pitch.y = 32; - vinfo->dest.pitch.u = 32; - vinfo->dest.pitch.v = 32; - // vinfo->dest.pitch.u = 0; - // vinfo->dest.pitch.v = 0; - - - info->pitch = ((info->src_w << 1) + 15) & ~15; - - switch (vinfo->fourcc) - { - case IMGFMT_Y211: - bpp = 1; - break; - case IMGFMT_BGR24: - bpp = 3; - break; - case IMGFMT_BGR32: - bpp = 4; - break; - default: - bpp = 2; - break; - } - - info->pitch = ((info->src_w * bpp) + 15) & ~15; - info->pitch |= ((info->pitch / bpp) << 16); - printf("$#### destination pitch = %u\n", info->pitch & 0xffff); - - vinfo->frame_size = (info->pitch & 0xffff) * info->src_h; - info->frame_size = vinfo->frame_size; - - info->picture_offset = info->screen_x * info->screen_y * (info->bpp >> 3); - if (info->picture_offset > (info->chip.fbsize - vinfo->frame_size)) { - printf("not enough memory for overlay\n"); - return -1; - } - - if (info->chip.arch == S3_SAVAGE3D) - info->video_base = map_phys_mem(pci_info.base0, info->chip.fbsize); - else - info->video_base = map_phys_mem(pci_info.base1, info->chip.fbsize); - - if (info->video_base == NULL) { - printf("errno = %s\n", strerror(errno)); - return -1; - } - - info->picture_base = (uint32_t) info->video_base + info->picture_offset; - vinfo->dga_addr = (void*)(info->picture_base); - vinfo->num_frames = (info->chip.fbsize - info->picture_offset)/vinfo->frame_size; - if(vinfo->num_frames > VID_PLAY_MAXFRAMES) vinfo->num_frames = VID_PLAY_MAXFRAMES; - - for(i = 0; i < vinfo->num_frames; i++) - vinfo->offsets[i] = vinfo->frame_size * i; - - return 0; -} - -/** - * @brief Set playback on : driver should activate BES on this call. - * - * @return 0. - */ -static int -savage_playback_on (void) -{ - // FIXME: enable - SavageDisplayVideoOld(); -//FIXME ADD - return 0; -} - -/** - * @brief Set playback off : driver should deactivate BES on this call. - * - * @return 0. - */ -static int -savage_playback_off (void) -{ - // otherwise we wont disable streams properly in new xorg - // FIXME: shouldnt this be enabled? -// SavageStreamsOn(); - SavageStreamsOff(); -// info->vidixcolorkey=0x0; - -// OUTREG( SSTREAM_WINDOW_START_REG, OS_XY(0xfffe, 0xfffe) ); -// SavageSetColorKeyOld(); -//FIXME ADD - return 0; -} - -/** - * @brief Driver should prepare and activate corresponded frame. - * - * @param frame the frame index. - * - * @return 0. - * - * @note This function is used only for double and triple buffering - * and never used for single buffering playback. - */ -int -savage_frame_select (unsigned int frame) -{ - OUTREG(SSTREAM_FBADDR0_REG, info->picture_offset - + (info->frame_size * frame)); - - return 0; -} - -static void debugout(unsigned int addr, unsigned int val){ - return ; - switch ( addr ){ - case PSTREAM_CONTROL_REG: - fprintf(stderr,"PSTREAM_CONTROL_REG"); - break; - case COL_CHROMA_KEY_CONTROL_REG: - fprintf(stderr,"COL_CHROMA_KEY_CONTROL_REG"); - break; - case SSTREAM_CONTROL_REG: - fprintf(stderr,"SSTREAM_CONTROL_REG"); - break; - case CHROMA_KEY_UPPER_BOUND_REG: - fprintf(stderr,"CHROMA_KEY_UPPER_BOUND_REG"); - break; - case SSTREAM_STRETCH_REG: - fprintf(stderr,"SSTREAM_STRETCH_REG"); - break; - case COLOR_ADJUSTMENT_REG: - fprintf(stderr,"COLOR_ADJUSTMENT_REG"); - break; - case BLEND_CONTROL_REG: - fprintf(stderr,"BLEND_CONTROL_REG"); - break; - case PSTREAM_FBADDR0_REG: - fprintf(stderr,"PSTREAM_FBADDR0_REG"); - break; - case PSTREAM_FBADDR1_REG: - fprintf(stderr,"PSTREAM_FBADDR1_REG"); - break; - case PSTREAM_STRIDE_REG: - fprintf(stderr,"PSTREAM_STRIDE_REG"); - break; - case DOUBLE_BUFFER_REG: - fprintf(stderr,"DOUBLE_BUFFER_REG"); - break; - case SSTREAM_FBADDR0_REG: - fprintf(stderr,"SSTREAM_FBADDR0_REG"); - break; - case SSTREAM_FBADDR1_REG: - fprintf(stderr,"SSTREAM_FBADDR1_REG"); - break; - case SSTREAM_STRIDE_REG: - fprintf(stderr,"SSTREAM_STRIDE_REG"); - break; - case SSTREAM_VSCALE_REG: - fprintf(stderr,"SSTREAM_VSCALE_REG"); - break; - case SSTREAM_VINITIAL_REG: - fprintf(stderr,"SSTREAM_VINITIAL_REG"); - break; - case SSTREAM_LINES_REG: - fprintf(stderr,"SSTREAM_LINES_REG"); - break; - case STREAMS_FIFO_REG: - fprintf(stderr,"STREAMS_FIFO_REG"); - break; - case PSTREAM_WINDOW_START_REG: - fprintf(stderr,"PSTREAM_WINDOW_START_REG"); - break; - case PSTREAM_WINDOW_SIZE_REG: - fprintf(stderr,"PSTREAM_WINDOW_SIZE_REG"); - break; - case SSTREAM_WINDOW_START_REG: - fprintf(stderr,"SSTREAM_WINDOW_START_REG"); - break; - case SSTREAM_WINDOW_SIZE_REG: - fprintf(stderr,"SSTREAM_WINDOW_SIZE_REG"); - break; - case FIFO_CONTROL: - fprintf(stderr,"FIFO_CONTROL"); - break; - case PSTREAM_FBSIZE_REG: - fprintf(stderr,"PSTREAM_FBSIZE_REG"); - break; - case SSTREAM_FBSIZE_REG: - fprintf(stderr,"SSTREAM_FBSIZE_REG"); - break; - case SSTREAM_FBADDR2_REG: - fprintf(stderr,"SSTREAM_FBADDR2_REG"); - break; - - } - fprintf(stderr,":\t\t 0x%08X = %u\n",val,val); -} - -VDXDriver savage_drv = { - "savage", - NULL, - .probe = savage_probe, - .get_caps = savage_get_caps, - .query_fourcc = savage_query_fourcc, - .init = savage_init, - .destroy = savage_destroy, - .config_playback = savage_config_playback, - .playback_on = savage_playback_on, - .playback_off = savage_playback_off, - .frame_sel = savage_frame_select, - .get_eq = savage_get_eq, - .set_eq = savage_set_eq, - .set_gkey = savage_set_gkeys, -};