Mercurial > mplayer.hg

--- a/DOCS/Polish/mencoder.1	Fri May 10 10:32:13 2002 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,284 +0,0 @@
-.\" MEncoder (C) 2000-2001 Arpad Gereoffy <sendmail@to.mplayer-users>
-.\" This manpage was/is done by Gabucino
-.\"
-.TH MEncoder
-.SH NAME
-mencoder \- Movie Encoder for Linux
-.SH SYNOPSIS
-.B mencoder
-.RB [ \-vcd\ <track\ number> ]
-.RB [ \-dvd\ <titleid> ]
-.RB [ \-chapter\ <chapterid> ]
-.RB [ \-dvdangle\ <angleid> ]
-.RB [ \-dvdkey\ <key> ]
-.RB [ \-nobps ]
-.RB [ \-aid\ <id> ]
-.RB [ \-vid\ <id> ]
-.RB [ \-pp\ <quality> ]
-.RB [ \-vc\ <video\ codec\ name> ]
-.RB [ \-ac\ <audio\ codec\ name> ]
-.RB [ \-vfm\ <video\ codec\ family> ]
-.RB [ \-afm\ <audio\ codec\ family> ]
-.RB [ \-include\ <configfile> ]
-.RB [ \-mc\ seconds/5f ]
-.RB [ \-v ]
-.RB [ \-mp3file\ <filename> ]
-.RB [ \-ac3file\ <filename> ]
-.RB [ \-ovc\ <video\ codec\ name> ]
-.RB [ \-oac\ <audio\ codec\ name> ]
-.RB [ \-divx4opts\ <codec\ options> ]
-.RB [ \-lavcopts\ <codec\ options> ]
-.RB [ \-lameopts\ <codec\ options> ]
-.RB [ \-pass\ <1/2> ]
-.RB [ \-passlogfile\ <filename> ]
-.RB [ \-ofps\ <fps> ]
-.RB [ \-o\ <filename> ]
-.RB [ \-frames\ <number> ]
-.RB [ \-x\ <rescale\ width> ]
-.RB [ \-y\ <rescale\ height> ]
-.RB [ \-sws\ <0-2> ]
-.RB [ \-ffourcc\ fourcc ]
-.I - or file or device
-.PP
-.SH DESCRIPTION
-.I mencoder
-MEncoder (MPlayer's Movie Encoder) is a simple movie encoder, designed to
-encode MPlayer-playable movies (AVI/DVD/VCD/VOB/MPG/MOV/VIV/NET) to other
-MPlayer-playable formats (see below). Currently it's in beta stage, and encodes
-only to DivX4 (1 or 2 passes) video, PCM/MP3/VBRMP3 audio. Also has stream
-copying abilities. In the future, there will be cropping, resizing filters, and
-other interesting stuff.
-.LP
-.SH "GENERAL OPTIONS"
-.TP
-.I NOTE
-Every "flag" option has "noflag" pair, e.g. -flag opposite is -noflag
-.TP
-.I NOTE
-CHECK THE HTML DOCUMENTATION TOO !
-.TP
-.B \-vcd <track number>
-Encode the specified VCD track.
-.TP
-.B \-dvd <title number>
-Encode the specified DVD title.
-.TP
-.B \-chapter <chapter id>
-Use with -dvd option (see above). Start encoding at the specified chapter.
-.TP
-.B \-dvdangle <angle id>
-Use with -dvd option (see above), and if the DVD disc has multiple angles.
-It will encode the angle specified here.
-.TP
-.B \-dvdkey <key>
-Used to decrypt CSS-encrypted streams on hard disk (with given CSS decrypt
-key).
-.TP
-.B \-nobps
-Used only for AVIs. Doesn't use the bps value in the AVI header, instead
-calculates it.
-.TP
-.B \-aid <audio stream id>
-If the source media contains multiple audio streams (for example DVDs), encode
-the specified one.
-.TP
-.B \-vid <video stream id>
-If the source media contains multiple video streams, encode the specified one.
-.TP
-.B \-pp <value>
-Apply a postprocess filter to enhance image quality. (values TODO)
-.TP
-.B \-vc <codec name>
-Use specified codec (according to codecs.conf) for decoding input video
-stream.
-.TP
-.B \-ac <codec name>
-Use specified codec (according to codecs.conf) for decoding input audio
-stream.
-.TP
-.B \-vfm <video codec family>
-Force decoding by using a specific codec FAMILY, and FALLBACK to default
-if failed.  For examples see MPlayer manpage.
-.TP
-.B \-afm <audio codec family>
-Force decoding by using a specific codec FAMILY, and FALLBACK to default
-if failed.  For examples see MPlayer manpage.
-.TP
-.B \-include
-specify config file to be parsed after the default
-.TP
-.B \-mc\ seconds/5frame
-maximum sync correction per 5 frames (in seconds).
-Use -mc 0 to disable input A/V sync.
-.TP
-.B \-v
-Increase verbosity.
-.TP
-.B \-ovc <codecname>
-Encode with the given codec (codec names are from codecs.conf).
-Examples:
-
-  -ovc help      get help
-  -ovc copy      no encoding, just streamcopy
-  -ovc divx4     encode to DivX4
-  -ovc lavc      encode with a libavcodec codec
-.TP
-.B \-oac <codecname>
-Encode with the given codec (codec names are from codecs.conf).
-Examples:
-
-  -oac help      get help
-  -oac copy      no encoding, just streamcopy
-  -oac pcm       encode to uncompressed PCM
-  -oac mp3lame   encode to MP3 (using Lame)
-.TP
-.B \-divx4opts
-If encoding to DivX4, you can specify its parameters here, like:
-
-  -divx4opts br=1800:deinterlace:key=250
-
-Available options:
-
-  help           get help
-  br=XXX         specify bitrate in
-                 kbit <4-16000> or
-                 bit  <16001-24000000>
-  key=XXX        maximum keyframe interval
-                 (in frames)
-  deinterlace    enable deinterlacing
-                 (don't use, DivX4 is buggy!)
-  q=XXXX         quality (1-fastest, 5-best)
-  min_quant=XXX  minimum quantizer (0-32)
-  max_quant=XXX  maximum quantizer (0-32)
-  rc_period=XXX  rate control period
-  rc_reaction_period=XXX rate control
-                         reaction period
-  rc_reaction_ratio=XXX  rate control
-                         reaction ratio
-
-.TP
-.B \-lavcopts
-If encoding with a codec from libavcodec, you can specify its parameters here,
-like:
-
-  -lavcopts vcodec=msmpeg4:vbitrate=1800:vhq:keyint=250
-
-Available options:
-
-  help           get help
-  vcodec=XXX     use the specified codec
-                 (for full list, see html doc!)
-  vbitrate=XXX   specify bitrate in
-                 kbit <4-16000> or
-                 bit  <16001-24000000>
-  keyint=XXX     interval between keyframes
-                 (specify in frames)
-  vhq            very high quality
-.TP
-.B \-lameopts
-If encoding to MP3 with libmp3lame, you can specify its parameters here, like:
-
-  -lameopts br=192
-
-Available options:
-
-    help         get help
-    br=XXX       specify bitrate in
-                 kbit <0-1024>
-                 (only for CBR)
-    q=XXX        Quality
-                 (0-highest, 9-fastest)
-                 (for VBR)
-    vbr=XXX      variable bitrate method
-                   0=cbr
-                   1=mt
-                   2=rh(default)
-                   3=abr
-                   4=mtrh
-    cbr          constant bitrate
-    mode=XXX     0=stereo
-                 1=joint-stereo
-                 2=dualchannel
-                 3=mono
-                 (default: auto)
-    padding=XXX  0=no
-                 1=all
-                 2=adjust
-    ratio=XXX    compression ratio <1-100>
-
-.TP
-.B \-pass <1/2>
-With this you can encode 2pass DivX4 files. First encode with -pass 1, then
-with the same parameters, encode with -pass 2.
-.TP
-.B \-passlogfile <filename>
-When encoding in 2pass mode, MEncoder dumps first pass' informations
-to the given file instead of the default divx2pass.log .
-.TP
-.B \-ofps <fps>
-The output file will have different frame/sec than the source.
-.TP
-.B \-o <filename>
-Outputs to the given filename, instead of the default 'test.avi' .
-.TP
-.B \-frames <number>
-Encode only given number of frames.
-.TP
-.B \-x <rescale width>
-Rescale output movie to given pixels wide.
-.TP
-.B \-y <rescale height>
-Rescale output movie to given pixels tall.
-.TP
-.B \-sws (0-2>
-Type of scaling method
-
-    0            fast bilinear (default)
-    1            bilinear
-    2            bicubic (best quality)
-.TP
-.B \-ffourcc fourcc
-Can be used to force the video fourcc of the output file. For example -ffourcc
-div3 will have the output file contain "div3" as video fourcc.
-.IP
-.SH FILES AND DIRECTORIES
-.IP
-.SH "EXAMPLES"
-.B Encoding DVD title #2
-mencoder -dvd 2 -o title2.avi
-.TP
-.B The same, but with libavcodec family, MJPEG compression
-mencoder -dvd 2 -o title2.avi -ovc lavc -lavcopts vcodec=mjpeg -ffourcc mjpg
-.TP
-.B Encoding from HTTP
-mencoder http://mplayer.hq/example.avi -o example.avi
-.TP
-.B Encoding from a pipe
-rar p test-SVCD.rar | mencoder -divx4opts br=800 -ofps 24 -pass 1 -- -
-.TP
-.B Encoding multiple *.vob files
-cat *.vob | mencoder <options> -
-.IP
-.SH BUGS
-Probably. Check the documentation.
-
-Bugreports should be addressed to the MPlayer-users mailing list
-(mplayer-users@mplayerhq.hu) ! If you want to submit a bugreport
-(which we love to receive!), please double-check the bugreports.html, and
-tell us all that we need to know to identify your problem.
-
-.LP
-.SH AUTHORS
-Check documentation !
-
-MPlayer is (C) 2000-2001
-.I Arpad Gereoffy <sendmail@to.mplayer-users>
-
-This manpage is written and maintained by
-.I Gabucino .
-.LP
-.SH STANDARD DISCLAIMER
-Use only at your own risk! There may be errors and inaccuracies that could
-be damaging to your system or your eye. Proceed with caution, and although
-this is highly unlikely, the author doesn't take any responsibility for that!
-.\" end of file