Mercurial > mplayer.hg
changeset 7814:988498df1996
<B>MPlayer</B> ---> MPlayer
| author | diego |
|---|---|
| date | Sun, 20 Oct 2002 12:20:39 +0000 |
| parents | 76940a39405a |
| children | c81e5a7f5862 |
| files | DOCS/bugreports.html DOCS/cd-dvd.html DOCS/codecs.html DOCS/documentation.html DOCS/encoding.html DOCS/faq.html DOCS/formats.html DOCS/mplayer.1 DOCS/skin.html DOCS/sound.html DOCS/users_against_developers.html DOCS/video.html |
| diffstat | 12 files changed, 217 insertions(+), 217 deletions(-) [+] |
line wrap: on
line diff
--- a/DOCS/bugreports.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/bugreports.html Sun Oct 20 12:20:39 2002 +0000 @@ -16,7 +16,7 @@ software project. But just like writing good software, good problem reports involve some work. Please realize that most developers are extremely busy and receive obscene amounts of email. So while your feedback is crucial in - improving <B>MPlayer</B> and very much appreciated, please understand that you + improving MPlayer and very much appreciated, please understand that you have to provide <B>all</B> of the information we request and follow the instructions in this document closely.</P> @@ -26,14 +26,14 @@ <P>If you feel have the necessary skills you are invited to have a go at fixing the bug yourself. Or maybe you already did that? Please read <A HREF="tech/patches.txt">this short document</A> to find out how to get - your code included in <B>MPlayer</B>. The people on the + your code included in MPlayer. The people on the <A HREF="http://mplayerhq.hu/mailman/listinfo/mplayer-dev-eng">mplayer-dev-eng</A> mailing list will assist you if you have questions.</P> <H2>How to report bugs</H2> -<P>First of all please try the latest CVS version of <B>MPlayer</B> as your bug +<P>First of all please try the latest CVS version of MPlayer as your bug might already be fixed there. Development moves extremely fast, most problems in official releases are reported within days or even hours, so please use <B>only CVS</B> to report bugs. CVS instructions can be found at the bottom of @@ -46,7 +46,7 @@ <P>Please do not send bug reports privately to individual developers. This is community work and thus there might be several people interested in it. Sometimes other users already experienced your troubles and know how to - circumvent a problem even if it is a bug in <B>MPlayer</B> code.</P> + circumvent a problem even if it is a bug in MPlayer code.</P> <P>Please describe your problem in as much detail as possible. Do a little detective work to narrow down the circumstances under which the problem @@ -164,7 +164,7 @@ <H4>For playback problems</H4> -<P>Please include the output of <B>MPlayer</B> at verbosity level 1, but +<P>Please include the output of MPlayer at verbosity level 1, but remember to <B>not truncate the output</B> when you paste it into your mail. The developers need all of the messages to properly diagnose a problem. You can direct the output into a file like this:</P> @@ -179,7 +179,7 @@ <P>Also upload a small text file having the same base name as your file with a .txt extension. Describe the problem you are having with the particular file there and include your email address as well as the output - of <B>MPlayer</B> at verbosity level 1. Usually the first 1-5 MB of a file are + of MPlayer at verbosity level 1. Usually the first 1-5 MB of a file are enough to reproduce the problem, but to be sure we ask you to:</P> <P><CODE> dd if=yourfile of=smallfile bs=1024k count=5</CODE></P> @@ -220,12 +220,12 @@ <H4>How to conserve information about a reproducible crash</H4> -Recompile <B>MPlayer</B> with debugging code enabled: +Recompile MPlayer with debugging code enabled: <P><CODE> ./configure --enable-debug=3<BR> make</CODE></P> -and then run <B>MPlayer</B> within gdb using: +and then run MPlayer within gdb using: <P><CODE> gdb ./mplayer</CODE></P> @@ -254,7 +254,7 @@ <H2>I know what I am doing...</H2> <P>If you created a proper bug report following the steps above and you are - confident it is a bug in <B>MPlayer</B>, not a compiler problem or broken + confident it is a bug in MPlayer, not a compiler problem or broken file, you have already read the documentation and you could not find a solution, your sound drivers are OK, then you might want to subscribe to the mplayer-advusers list and send your bug report there to get a better and @@ -263,7 +263,7 @@ in the manual there, you will be ignored or flamed instead of getting an appropriate answer.<BR> So do not flame us and subscribe to -advusers only if you really know - what you are doing and feel like being an advanced <B>MPlayer</B> user or + what you are doing and feel like being an advanced MPlayer user or developer. If you meet these criteria it should not be difficult to find out how to subscribe...</P>
--- a/DOCS/cd-dvd.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/cd-dvd.html Sun Oct 20 12:20:39 2002 +0000 @@ -60,9 +60,9 @@ <H2><A NAME="dvd">4.2 DVD playback</A></H2> -<P><B>MPlayer</B> uses <CODE>libdvdread</CODE> and <CODE>libdvdcss</CODE> for +<P>MPlayer uses <CODE>libdvdread</CODE> and <CODE>libdvdcss</CODE> for DVD decryption and playback. These two libraries are contained in the - <CODE>libmpdvdkit2/</CODE> subdirectory of the <B>MPlayer</B> source tree, you + <CODE>libmpdvdkit2/</CODE> subdirectory of the MPlayer source tree, you do not have to install them separately. We opted for this solution because we had to fix a libdvdread bug, and apply a patch which adds <B>cracked CSS keys caching support</B> to libdvdcss. This results in a large @@ -70,7 +70,7 @@ playing. The cracked keys are stored in the <CODE>~/.mplayer/DVDKeys</CODE> directory.</P> -<P><B>MPlayer</B> can also use system-wide <CODE>libdvdread</CODE> and +<P>MPlayer can also use system-wide <CODE>libdvdread</CODE> and <CODE>libdvdcss</CODE> libraries, but this solution is <B>not</B> recommended, as it can result in bugs, library incompatibilities, and slower speed.</P> @@ -80,7 +80,7 @@ <H4>Old-style DVD support - OPTIONAL</H4> <P>Useful if you want to play encoded VOBs from hard disk. Compile and - install <B>libcss</B> 0.0.1 (not newer) for this (If <B>MPlayer</B> fails to + install <B>libcss</B> 0.0.1 (not newer) for this (If MPlayer fails to detect it, use the <CODE>-csslib /path/to/libcss.so</CODE> option).</P> <P>For the complete list of available options, please read the man page.</P>
--- a/DOCS/codecs.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/codecs.html Sun Oct 20 12:20:39 2002 +0000 @@ -47,7 +47,7 @@ <P>This section contains information about the DivX4 and DivX5 codecs of <A HREF="http://www.projectmayo.com">Project Mayo</A>. Their first available alpha version was OpenDivX 4.0 alpha 47 and 48. Support for this was included - in <B>MPlayer</B> in the past, and built by default. We also used its + in MPlayer in the past, and built by default. We also used its postprocessing code to optionally enhance visual quality of MPEG1/2 movies. Now we use our own, for all file types.</P> @@ -67,7 +67,7 @@ <P><B>Note:</B> Do <B>not</B> forget adding <CODE>/usr/local/lib</CODE> to your <CODE>/etc/ld.so.conf</CODE> and running <CODE>ldconfig</CODE>!</P> -<P><B>MPlayer</B> autodetects DivX4/DivX5 if it is properly installed, just +<P>MPlayer autodetects DivX4/DivX5 if it is properly installed, just compile as usual. If it does not detect it, you did not install or configure it correctly.</P> @@ -76,7 +76,7 @@ <DL> <DT><CODE>-vc odivx</CODE></DT> <DD>Uses the codec in OpenDivX fashion. In this case it - produces YV12 images in its own buffer, and <B>MPlayer</B> does colorspace + produces YV12 images in its own buffer, and MPlayer does colorspace conversion via libvo. (<B>Fast, recommended!</B>)</DD> <DT><CODE>-vc divx4</CODE></DT> @@ -107,22 +107,22 @@ variants: DivX 3, DivX 4, DivX 5, Windows Media Video 7 (WMV1)</P> -<P>If you use an <B>MPlayer</B> release you have libavcodec right in the - package, just build as usual. If you use <B>MPlayer</B> from CVS you have to +<P>If you use an MPlayer release you have libavcodec right in the + package, just build as usual. If you use MPlayer from CVS you have to extract libavcodec from the FFmpeg CVS tree as FFmpeg 0.4.5 does <B>not</B> - work with <B>MPlayer</B>. In order to achieve this do:</P> + work with MPlayer. In order to achieve this do:</P> <OL> <LI><CODE>cvs -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login</CODE></LI> <LI><CODE>cvs -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg</CODE></LI> <LI>Move the <CODE>libavcodec</CODE> directory from the FFmpeg sources to the - root of the <B>MPlayer</B> CVS tree. It should look like this: + root of the MPlayer CVS tree. It should look like this: <P> <CODE>main/libavcodec</CODE></P> Symlinking is <B>not</B> enough, you have to copy or move it!</LI> <LI>Compile. Configure should detect problems before compilation.</LI> </OL> -<P><B>Note:</B> <B>MPlayer</B> from CVS does contain a libavcodec +<P><B>Note:</B> MPlayer from CVS does contain a libavcodec subdirectory, but it does <B>not</B> contain the source for libavcodec! You must follow the steps above to obtain the source for this library.</P> @@ -140,7 +140,7 @@ action against anyone for codec-related issues. </P> -<P><B>MPlayer</B> is capable of employing the XAnim codecs for decoding. Follow +<P>MPlayer is capable of employing the XAnim codecs for decoding. Follow the instructions to enable them:</P> <OL> @@ -157,7 +157,7 @@ </OL> <P>XAnim is video codec family number 10, so you may want to use the <CODE>-vfm 10</CODE> - option to tell <B>MPlayer</B> to use them if possible.</P> + option to tell MPlayer to use them if possible.</P> <P>Tested codecs include: <B>Indeo 3.2</B>, <B>4.1</B>, <B>5.0</B>, <B>CVID</B>, <B>3ivX</B>, <B>h263</B>.</P> @@ -165,7 +165,7 @@ <H4><A NAME="vivo_video">2.2.1.4 VIVO video</A></H4> -<P><B>MPlayer</B> can play Vivo (1.0 and 2.0) videos. The most suitable codec +<P>MPlayer can play Vivo (1.0 and 2.0) videos. The most suitable codec for 1.0 files is FFmpeg's H263 decoder, you can use it with the <CODE>-vc ffh263</CODE> option (default). For 2.0 files, use the <A HREF="http://www.mplayerhq.hu/MPlayer/samples/drivers32/ivvideo.dll">ivvideo.dll</A> @@ -176,7 +176,7 @@ <H4><A NAME="mpeg">2.2.1.5 MPEG 1/2 video</A></H4> <P>MPEG1 and MPEG2 are decoded by the multiplatform native <B>libmpeg2</B> - library, whose source code is included in <B>MPlayer</B>. We handle buggy + library, whose source code is included in MPlayer. We handle buggy MPEG 1/2 video files by catching sig11 (segmentation fault), and quickly reinitializing the codec, continuing exactly from where the failure occurred. This recovery technique has no measurable speed penalty.</P> @@ -192,14 +192,14 @@ <H4><A NAME="cinepak">2.2.1.7 Cinepak CVID</A></H4> -<P><B>MPlayer</B> uses its own open source, multiplatform Cinepak decoder by +<P>MPlayer uses its own open source, multiplatform Cinepak decoder by default. It supports YUV outputs, so that hardware scaling is possible if the video output driver permits it.</P> <H4><A NAME="realvideo">2.2.1.8 RealVideo</A></H4> -<B>MPlayer</B> supports decoding all versions of RealVideo: +MPlayer supports decoding all versions of RealVideo: <UL> <LI>RealVideo 1.0 (fourcc RV10) - en/decoding supported by <B>libavcodec</B></LI> @@ -207,8 +207,8 @@ </UL> <P>It is recommended to download and install RealPlayer8 or RealONE, because - <B>MPlayer</B> can use their libraries to decode files with RealVideo 2.0 - - 4.0 video. The <B>MPlayer</B> configure script should detect the + MPlayer can use their libraries to decode files with RealVideo 2.0 - + 4.0 video. The MPlayer configure script should detect the RealPlayer libraries in the standard locations of a full installation. If it does not, tell configure where to look with the <CODE>--with-reallibdir</CODE> switch.</P> @@ -258,7 +258,7 @@ <LI><CODE>make -f Makefile.linux</CODE></LI> <LI>Get <CODE>encore2.h</CODE> and <CODE>decore.h</CODE> from the DivX4Linux package, and copy them to <CODE>/usr/local/include/</CODE>.</LI> - <LI>Recompile <B>MPlayer</B> with <CODE>--with-xvidcore=/path/to/libcore.a</CODE>.</LI> + <LI>Recompile MPlayer with <CODE>--with-xvidcore=/path/to/libcore.a</CODE>.</LI> </OL> @@ -354,13 +354,13 @@ VIVO/2.0 file. VIVO/1.0 files have <B>g.723</B> audio, and VIVO/2.0 files have <B>Vivo Siren</B> audio. Both are supported. You can grab the <A HREF="http://www.mplayerhq.hu/MPlayer/samples/drivers32/vivog723.acm">g.723/Siren</A> - Win32 DLL from the <B>MPlayer</B> site, + Win32 DLL from the MPlayer site, then copy it into the <CODE>/usr/lib/win32</CODE> directory.</P> <H4><A NAME="realaudio">2.2.2.5 RealAudio</A></H4> -<B>MPlayer</B> supports decoding nearly all versions of RealAudio: +MPlayer supports decoding nearly all versions of RealAudio: <UL> <LI>RealAudio DNET - decoding supported by <B>liba52</B></LI> @@ -379,7 +379,7 @@ <P>VFW (Video for Windows) is the old Video API for Windows. Its codecs have the .DLL or (rarely) .DRV extension. - If <B>MPlayer</B> fails at playing your AVI with this kind of message:</P> + If MPlayer fails at playing your AVI with this kind of message:</P> <P> <CODE>UNKNOWN video codec: HFYU (0x55594648)</CODE></P> @@ -435,7 +435,7 @@ <P><B>Note:</B> If there is no <CODE>Filename</CODE> entry and <CODE>DisplayName</CODE> contains something like <CODE>device:dmo</CODE>, then it is a DMO-Codec, which are - currently not supported by <B>MPlayer</B>.</P> + currently not supported by MPlayer.</P> <P><B>Old Method:</B> Take a deep breath and start searching the registry...</P>
--- a/DOCS/documentation.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/documentation.html Sun Oct 20 12:20:39 2002 +0000 @@ -307,33 +307,33 @@ <H1><A NAME="introduction">1. Introduction</A></H1> -<P><B>MPlayer</B> is a movie player for LINUX (runs on many other Unices, and +<P>MPlayer is a movie player for LINUX (runs on many other Unices, and <B>non-x86</B> CPUs, see the <A HREF="#ports">ports section</A>). It plays most MPEG, VOB, AVI, OGG, VIVO, ASF/WMV, QT/MOV, FLI, RM, NuppelVideo, yuv4mpeg, FILM, RoQ, PVA files, supported by many native, XAnim, RealPlayer, and Win32 DLL codecs. You can watch <B>VideoCD</B>, <B>SVCD</B>, <B>DVD</B>, <B>3ivx</B>, <B>RealMedia</B>, and <B>DivX</B> movies too (and you don't need the avifile - library at all!). Another big feature of <B>MPlayer</B> is the wide range of + library at all!). Another big feature of MPlayer is the wide range of supported output drivers. It works with X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, DirectFB, but you can also use GGI and SDL (and this way all their drivers) and some lowlevel card-specific drivers (for Matrox, 3Dfx and Radeon, Mach64, Permedia3) too! Most of them supports software or hardware scaling, so you can enjoy movies in - fullscreen. <B>MPlayer</B> supports displaying through some hardware MPEG + fullscreen. MPlayer supports displaying through some hardware MPEG decoder boards, such as the <B><A HREF="video.html#dvb">DVB</A></B> and <B><A HREF="video.html#dxr3">DXR3/Hollywood+</A></B>. And what about the nice big antialiased shaded subtitles (<B>10 supported types</B>) with European/ISO 8859-1,2 (Hungarian, English, Czech, etc), Cyrillic, Korean fonts, and the onscreen display (OSD)?</P> -<P><B>MPlayer</B> is under GPL v2 license.</P> +<P>MPlayer is under GPL v2 license.</P> <P>The player is rock solid playing damaged MPEG files (useful for some VCDs), and it plays bad AVI files which are unplayable with the famous windows media player. Even AVI files without index chunk are playable, and you can temporarily rebuild their indexes with the <CODE>-idx</CODE> option, or - permanently with <B>MEncoder</B>, thus enabling seeking! + permanently with MEncoder, thus enabling seeking! As you see, stability and quality are the most important things, but the speed is also amazing.</P> @@ -390,7 +390,7 @@ <H2><A NAME="installation">1.2 Installation</A></H2> <P>In this chapter I'll try to guide you through the compiling and - configuring process of <B>MPlayer</B>. It's not easy, but it won't necessarily + configuring process of MPlayer. It's not easy, but it won't necessarily be hard. If you experience a different behavior than what I explain, please search through this documentation and you'll find your answers. If you see links, please follow them and read carefully what they contain. It @@ -412,7 +412,7 @@ runtime problems). If you vote for 3.x.x, try to use the latest version, early releases had various bugs, so be sure you use at least 3.1, it's tested and working. For detailed information about gcc 2.96's bugs (that are - still NOT fixed, they have been WORKED AROUND in <B>MPlayer</B>!), see the + still NOT fixed, they have been WORKED AROUND in MPlayer!), see the <A HREF="users_against_developers.html#gcc">gcc 2.96</A> section and the <A HREF="faq.html">FAQ</A>.</LI> <LI><B>XFree86</B> - suggested version is <B>always the newest (4.2.1)</B>. @@ -429,9 +429,9 @@ video cards that lag strangely with the xv driver). Always use the newest (beginning from 1.2.x).</LI> <LI><B>libjpeg</B> - optional JPEG decoder, used by -mf and some QT MOV files. - Useful for both <B>MPlayer</B> and <B>MEncoder</B> if you plan to work with jpeg files.</LI> + Useful for both MPlayer and MEncoder if you plan to work with jpeg files.</LI> <LI><B>libpng</B> - recommended and default (M)PNG decoder. Required for GUI. - Useful for both <B>MPlayer</B> and <B>MEncoder</B>.</LI> + Useful for both MPlayer and MEncoder.</LI> <LI><B>lame</B> - recommended, needed for encoding MP3 audio with MEncoder, suggested version is <B>always the newest</B> (at least 3.90).</LI> <LI><B>libogg</B> - optional, needed for playing OGG file format.</LI> @@ -455,9 +455,9 @@ other MPEG4 types. Recommended!</LI> </UL> </LI> - <LI><B>Win32 codecs</B>: If you plan to use <B>MPlayer</B> on x86 + <LI><B>Win32 codecs</B>: If you plan to use MPlayer on x86 architecture, you will possibly need them. Download and unzip w32codecs.zip - to /usr/lib/win32 <B>BEFORE</B> compiling <B>MPlayer</B>, otherwise no Win32 + to /usr/lib/win32 <B>BEFORE</B> compiling MPlayer, otherwise no Win32 support will be compiled!<BR> <B>Note:</B> the avifile project has a similar codecs package, but it differs from ours. If you want to use all supported codecs, then install our package @@ -498,14 +498,14 @@ screen, hardware YUV zoom) for decoding <B>3ivx</B> and Indeo 3/4/5 movies, and some old formats. And they are multiplatform, so this is the only way to play Indeo on non-x86 platforms (well, apart from using XAnim:). But for - example Cinepak movies are best played with <B>MPlayer</B>'s own Cinepak + example Cinepak movies are best played with MPlayer's own Cinepak decoder!</LI> <LI>For <B>Ogg Vorbis</B> audio decoding you need to install <CODE>libvorbis</CODE> properly. Use deb/rpm packages if available, or compile from <A HREF="http://ogg.org/ogg/vorbis/download/vorbis_nightly_cvs.tgz">source</A> (this is a nightly updated tarball of Vorbis CVS).</LI> - <LI><B>MPlayer</B> can use the libraries of RealPlayer 8 or RealONE to play + <LI>MPlayer can use the libraries of RealPlayer 8 or RealONE to play files with <B>RealVideo 2.0 - 4.0</B> video, and Sipro/Cook audio. See <A HREF="formats.html#real">RealMedia file format</A> section for installation instructions and more information.</LI> @@ -528,14 +528,14 @@ to use the mga_vid kernel module instead, for it works much better. Please see the <A HREF="video.html#mga_vid">mga_vid</A> section about its installation and usage. It is important to do these steps <I>before</I> - compiling <B>MPlayer</B>, otherwise no mga_vid support will be built. Also + compiling MPlayer, otherwise no mga_vid support will be built. Also check out the <A HREF="video.html#tv-out_matrox">Matrox TV-out</A> section. <U><B>If you don't use Linux</B></U>, your only possibility is the VIDIX driver: read the <A HREF="video.html#vidix">VIDIX</A> section.</LI> <LI><B>3Dfx Voodoo3/Banshee cards</B>: please see the <A HREF="video.html#tdfxfb">tdfxfb</A> section in order to gain big speedup. It is important to do these steps <B>before</B> compiling - <B>MPlayer</B>, otherwise no 3Dfx support will be built. Also see the <A + MPlayer, otherwise no 3Dfx support will be built. Also see the <A HREF="video.html#tv-out_voodoo">3dfx TV-out section</A>. If you use X, use <B>at least 4.2.0</B>, as the 3dfx Xv driver was broken in 4.1.0 and earlier releases.</LI> @@ -636,7 +636,7 @@ <LI><B>C-Media with SP/DIF out</B>: hardware AC3 passthrough is possible with these cards, see <A HREF="codecs.html#hardware_ac3">Hardware AC3 decoding</A> section.</LI> - <LI>Features of <B>other cards</B> aren't supported by <B>MPlayer</B>. + <LI>Features of <B>other cards</B> aren't supported by MPlayer. <U>It's very recommended to read the <A HREF="sound.html">sound card section</A>!</U></LI> </UL> @@ -646,14 +646,14 @@ <UL> <LI>Decide if you need GUI. If you do, see the <A HREF="#gui">GUI section</A> before compiling.</LI> - <LI>If you want to install <B>MEncoder</B> (our great all-purpose encoder), + <LI>If you want to install MEncoder (our great all-purpose encoder), see the <A HREF="encoding.html">MEncoder section</A>.</LI> <LI>If you have a V4L compatible <B>TV tuner</B> card, and wish to watch/grab - and encode movies with <B>MPlayer</B>, read the <A HREF="#tv">TV input</A> + and encode movies with MPlayer, read the <A HREF="#tv">TV input</A> section.</LI> </UL> -<P>Then build <B>MPlayer</B>:</P> +<P>Then build MPlayer:</P> <PRE> ./configure @@ -661,17 +661,17 @@ make install </PRE> -<P>At this point, <B>MPlayer</B> is ready to use. The directory +<P>At this point, MPlayer is ready to use. The directory <CODE>$PREFIX/share/mplayer</CODE> contains the <CODE>codecs.conf</CODE> file, which is used to tell the program all the codecs and their capabilities. This file should always be kept up to date together with the main binary.<BR> Check if you have <CODE>codecs.conf</CODE> in your home directory - (<CODE>~/.mplayer/codecs.conf</CODE>) left from old <B>MPlayer</B> versions, and remove it.</P> + (<CODE>~/.mplayer/codecs.conf</CODE>) left from old MPlayer versions, and remove it.</P> <P><B>Debian users</B> can build a <CODE>.deb</CODE> package for themselves, it's very simple. Just exec <CODE>fakeroot debian/rules binary</CODE> in - <B>MPlayer</B>'s root directory. See + MPlayer's root directory. See <A HREF="documentation.html#debian">Debian packaging</A> for detailed instructions.</P> @@ -712,12 +712,12 @@ <P>Currently you can't use the <CODE>-gui</CODE> option on the command line, due to technical reasons.</P> -<P>As <B>MPlayer</B> doesn't have a skin included, you have to download them if +<P>As MPlayer doesn't have a skin included, you have to download them if you want to use the GUI. See the <A HREF="http://www.mplayerhq.hu/homepage/dload.html">download page</A>. They should be extracted to the usual system-wide directory (<CODE>$PREFIX/share/mplayer/Skin</CODE>), or to - <CODE>$HOME/.mplayer/Skin</CODE>. <B>MPlayer</B> by default looks in these + <CODE>$HOME/.mplayer/Skin</CODE>. MPlayer by default looks in these directories for a directory named <I>default</I>, but you can use the <CODE>-skin newskin</CODE> option, or the <CODE>skin=newskin</CODE> config file directive to use the skin in <CODE>*/Skin/newskin</CODE> directory.</P> @@ -726,7 +726,7 @@ <H2><A NAME="subtitles_osd">1.4 Subtitles and OSD</A></H2> <P> - <B>MPlayer</B> can display subtitles along with movie files. Currently the following + MPlayer can display subtitles along with movie files. Currently the following formats are supported:</P> <UL> <LI>VobSub</LI> @@ -779,7 +779,7 @@ the subtitle file are different.<BR> Please note that the MicroDVD subtitle format uses absolute frame numbers for its timing, and therefore the <CODE>-subfps</CODE> option cannot be used with this format. As - <B>MPlayer</B> has no way to guess the frame rate of the subtitle file, you + MPlayer has no way to guess the frame rate of the subtitle file, you have to manually convert the frame rate. There is a little perl script in the <CODE>contrib</CODE> directory of the MPlayer FTP site to do this conversion for you.</P> @@ -789,7 +789,7 @@ <H3><A NAME="mpsub">1.4.1 MPlayer's own subtitle format (MPsub)</A></H3> -<P><B>MPlayer</B> introduces a new subtitle format called <B>MPsub</B>. It was +<P>MPlayer introduces a new subtitle format called <B>MPsub</B>. It was designed by me (Gabucino). Basically its main feature is being <I>dynamically</I> time-based (although it has frame-based mode too). Example (from @@ -821,11 +821,11 @@ <H3><A NAME="install_osd">1.4.2 Installing OSD and subtitles</A></H3> -<P>You need an <B>MPlayer</B> font package to be able to use OSD/SUB feature. +<P>You need an MPlayer font package to be able to use OSD/SUB feature. There are many ways to get it:</P> <UL> - <LI>download ready-to-use font packages from <B>MPlayer</B> site. + <LI>download ready-to-use font packages from MPlayer site. Note: currently available fonts are limited for iso 8859-1/2 support, but there are some other (including Korean, Russian, 8859-8 etc) fonts at contrib/font section of FTP, made by users.<BR> @@ -871,7 +871,7 @@ <H2><A NAME="rtc">1.5 RTC</A></H2> -There are three timing methods in <B>MPlayer</B>. +There are three timing methods in MPlayer. <UL> <LI><B>To use the old method</B>, you don't have to do anything. It uses @@ -880,7 +880,7 @@ <LI><B>The new timer</B> code uses PC's RTC (Real Time Clock) for this task, because it has precise 1ms timers. It is automagically enabled when available, but requires root privileges, a <I>setuid root</I> - <B>MPlayer</B> binary or a properly set up kernel. + MPlayer binary or a properly set up kernel. <BR> If you are running kernel 2.4.19pre8 or later you can adjust the maximum RTC frequency for normal users through the <CODE>/proc</CODE> filesystem. @@ -984,7 +984,7 @@ <H2><A NAME="command_line">3.1 Command line</A></H2> -<P><B>MPlayer</B> utilizes a complex playtree. It consists of global options +<P>MPlayer utilizes a complex playtree. It consists of global options written as first (for example <CODE>mplayer -vfm 5</CODE>), and options written after filenames, that apply only to the given filename/URL/whatever (for example <CODE>mplayer -vfm 5 movie1.avi movie2.avi -vfm 4</CODE>).<BR> @@ -1017,15 +1017,15 @@ <H2><A NAME="control">3.2 Control</A></H2> -<P><B>MPlayer</B> has a fully configurable, command driven, control layer which - lets you control <B>MPlayer</B> with keyboard, mouse, joystick or remote +<P>MPlayer has a fully configurable, command driven, control layer which + lets you control MPlayer with keyboard, mouse, joystick or remote control (using LIRC). See the man page for the complete list of keyboard controls.</P> <H3><A NAME="controls_configuration">3.2.1 Controls configuration</A></H3> -<P><B>MPlayer</B> allows you bind any key/button to any <B>MPlayer</B> command +<P>MPlayer allows you bind any key/button to any MPlayer command using a simple config file. The syntax consist of a key name followed by a command. The default config file location is <CODE>$HOME/.mplayer/input.conf</CODE> but it can be overridden using the @@ -1115,7 +1115,7 @@ <LI><B>audio_delay</B> (float) val <P>Adjust the audio delay of val seconds</P></LI> <LI><B>quit</B> - <P>Quit <B>MPlayer</B></P></LI> + <P>Quit MPlayer</P></LI> <LI><B>pause</B> <P>Pause/unpause the playback</P></LI> <LI><B>grap_frames</B> @@ -1175,12 +1175,12 @@ More about it at <A HREF="http://www.lirc.org">www.lirc.org</A>.</P> <P>If you have installed the lirc-package, configure will autodetect it. If - everything went fine, <B>MPlayer</B> will print a message like "Setting up + everything went fine, MPlayer will print a message like "Setting up lirc support..." on startup. If an error occurs it will tell you. If it doesn't tell you anything about LIRC there's no support compiled in. That's it :-)</P> -<P>The application name for <B>MPlayer</B> is - oh wonder - 'mplayer'. +<P>The application name for MPlayer is - oh wonder - 'mplayer'. You can use any mplayer commands and even pass more than one command by separating them with \n. Don't forget to enable the repeat flag in .lircrc when it make sense (seek, volume, etc). Here's an excerpt from my @@ -1220,23 +1220,23 @@ <H3><A NAME="slave">3.2.3 Slave mode</A></H3> -<P>The slave mode allow you to build simple frontend to <B>MPlayer</B>. When - enabled (with the <CODE>-slave</CODE> switch) <B>MPlayer</B> will read +<P>The slave mode allow you to build simple frontend to MPlayer. When + enabled (with the <CODE>-slave</CODE> switch) MPlayer will read commands separated by new line (\n) from stdin.</P> <H2><A NAME="streaming">3.3 Streaming from network or pipes</A></H2> -<P><B>MPlayer</B> can play files from network, using the HTTP, MMS or RTSP/RTP +<P>MPlayer can play files from network, using the HTTP, MMS or RTSP/RTP protocol.</P> <P>Playing goes by simply using adding the URL to the command line. - <B>MPlayer</B> also honors the http_proxy environment variable, and uses + MPlayer also honors the http_proxy environment variable, and uses proxy if available. Proxy usage can also be forced:</P> <P><CODE>mplayer http_proxy://proxy.micorsops.com:3128/http://micorsops.com:80/stream.asf</CODE></P> -<P><B>MPlayer</B> can read from stdin (NOT named pipes). This can be for example +<P>MPlayer can read from stdin (NOT named pipes). This can be for example used to play from FTP:</P> <P><CODE> wget ftp://micorsops.com/something.avi -O - | mplayer -</CODE></P> @@ -1294,12 +1294,12 @@ <P>To build the package you will need GNU make (gmake, /usr/ports/devel/gmake), native BSD make will not work.</P> -<P>To run <B>MPlayer</B> you will need to re-compile the kernel with +<P>To run MPlayer you will need to re-compile the kernel with "options USER_LDT" (unless you are running -CURRENT, where this is default). If you have a CPU with SSE also use "options CPU_ENABLE_SSE" to use it (FreeBSD-STABLE required, or use kernel patches).</P> -<P>If <B>MPlayer</B> complains about "CD-ROM Device '/dev/cdrom' not found!" make a +<P>If MPlayer complains about "CD-ROM Device '/dev/cdrom' not found!" make a symbolic link: <CODE>ln -s /dev/(your_cdrom_device) /dev/cdrom</CODE></P> <P>There's no DVD support for FreeBSD yet.</P> @@ -1317,7 +1317,7 @@ available. However, <B>DivX/OpenDivX</B> movies should work, when using libavcodec.</P> -<P>On <B>UltraSPARC</B>s, <B>MPlayer</B> takes advantage of their <B>VIS</B> +<P>On <B>UltraSPARC</B>s, MPlayer takes advantage of their <B>VIS</B> extensions (equivalent to MMX), currently only in <I>libmpeg2</I>, <I>libvo</I> and <I>libavcodec</I>, but not in mp3lib. You can watch a VOB file on a 400MHz CPU. You'll need @@ -1402,7 +1402,7 @@ <H2><A NAME="strongarm">6.4 StrongARM</A></H2> -<P><B>MPlayer</B> is reported to compile on StrongARM. Use the following command line:</P> +<P>MPlayer is reported to compile on StrongARM. Use the following command line:</P> <PRE> ./configure --target=arm-linux --disable-css --with-x11libdir=/usr/arm/lib @@ -1419,7 +1419,7 @@ <H2><A NAME="qnx">6.6 QNX</A></H2> <P>Works. You'll need to download SDL for QNX, and install it. Then run - <B>MPlayer</B> with <CODE>-vo sdl:photon</CODE> and <CODE>-ao sdl:nto</CODE> + MPlayer with <CODE>-vo sdl:photon</CODE> and <CODE>-ao sdl:nto</CODE> options, and it should be fast.</P> <P>The <CODE>-vo x11</CODE> output will be even slower than on Linux, since @@ -1437,10 +1437,10 @@ in PATH and do a '<CODE>gmake -k</CODE>', then make sure that the native version is used and do '<CODE>gmake</CODE>'.</P> -<P>To use Win32 DLLs with <B>MPlayer</B> you will need to re-compile the +<P>To use Win32 DLLs with MPlayer you will need to re-compile the kernel with "<CODE>option USER_LDT</CODE>".</P> -<P>If <B>MPlayer</B> complains about not finding '/dev/cdrom' or +<P>If MPlayer complains about not finding '/dev/cdrom' or '/dev/dvd' make a symbolic link, e.g. <CODE>ln -s /dev/rcd0c /dev/dvd</CODE></P> @@ -1450,16 +1450,16 @@ <H2><A NAME="cygwin">6.8. Cygwin</A></H2> -<P>You will have to go to the <B>MPlayer</B> directory, and copy or symlink +<P>You will have to go to the MPlayer directory, and copy or symlink <CODE>etc/cygwin_inttypes.h</CODE> to <CODE>/usr/include/inttypes.h</CODE> to - make <B>MPlayer</B> compile. Otherwise it will complain about missing + make MPlayer compile. Otherwise it will complain about missing <CODE>intypes.h</CODE>.</P> <H1><A NAME="mailing_lists">Appendix A - Mailing lists</A></H1> -<P>There are some public mailing lists on <B>MPlayer</B>. Unless explicitly +<P>There are some public mailing lists on MPlayer. Unless explicitly stated otherwise the language of these lists is <B>English</B>. Please do not send messages in other languages or HTML mail! Message size limit is 80k. If you have something bigger put it up for download somewhere. Click the @@ -1474,7 +1474,7 @@ <UL> <LI>MPlayer developers list: <A HREF="http://mplayerhq.hu/mailman/listinfo/mplayer-dev-eng">http://mplayerhq.hu/mailman/listinfo/mplayer-dev-eng</A><BR> - This list is about <B>MPlayer</B> development! Talking about interface/API + This list is about MPlayer development! Talking about interface/API changes, new libraries, code optimization, configure changes is ontopic here. Send patches but <B>not</B> bug reports, user questions, feature requests or flames here to keep the list traffic low.</LI> @@ -1511,13 +1511,13 @@ </LI> <LI>MPlayer CVS-log: <A HREF="http://mplayerhq.hu/mailman/listinfo/mplayer-cvslog">http://mplayerhq.hu/mailman/listinfo/mplayer-cvslog</A><BR> - All changes in <B>MPlayer</B> code are automatically sent to this list. Only + All changes in MPlayer code are automatically sent to this list. Only questions about these changes belong here (if you do not understand why a change is required or you have a better fix or you have noticed a possible bug/problem in the commit).</LI> <LI>MPlayer Cygwin-porting list: <A HREF="http://mplayerhq.hu/mailman/listinfo/mplayer-cygwin">http://mplayerhq.hu/mailman/listinfo/mplayer-cygwin</A><BR> - List for discussion about <B>MPlayer</B>'s Cygwin port.</LI> + List for discussion about MPlayer's Cygwin port.</LI> </UL> <P><B>Note:</B> You can reach the searchable mailing list archives at
--- a/DOCS/encoding.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/encoding.html Sun Oct 20 12:20:39 2002 +0000 @@ -12,7 +12,7 @@ <H2><A NAME="encoding">2.4 Encoding with MEncoder</A></H2> -<P><B>MEncoder</B> (<B>MPlayer</B>'s Movie Encoder) is a simple movie encoder, +<P>MEncoder (MPlayer's Movie Encoder) is a simple movie encoder, designed to encode MPlayer-playable movies (<B>AVI/ASF/OGG/DVD/VCD/VOB/MPG/MOV/VIV/FLI/RM/NUV/NET/PVA</B>) to other MPlayer-playable formats (see below). It can encode with various codecs, like @@ -24,7 +24,7 @@ <H3><A NAME="compilation">2.4.1 Compilation</A></H3> <UL> - <LI><B>OPTIONAL</B> - read <B>MPlayer</B>'s compilation instruction.</LI> + <LI><B>OPTIONAL</B> - read MPlayer's compilation instruction.</LI> <LI><B>OPTIONAL (LINUX ONLY)</B> - download the newest <B>DivX4linux</B> libs from <A HREF="http://avifile.sourceforge.net/download.htm">avifile.sourceforge.net</A>, and have them PROPERLY installed. You need them if you want DivX4 @@ -53,13 +53,13 @@ </UL> <P>You are ready. As you probably know, other encoding tools need the - <I>avifile</I> library installed. <B>MEncoder</B> doesn't need it at all.</P> + <I>avifile</I> library installed. MEncoder doesn't need it at all.</P> <H3><A NAME="features">2.4.2 MEncoder features</A></H3> <UL> - <LI>encoding from the wide range of fileformats and decoders of <B>MPlayer</B></LI> + <LI>encoding from the wide range of fileformats and decoders of MPlayer</LI> <LI>encoding to all the codecs of ffmpeg's <A HREF="codecs.html#libavcodec">libavcodec</A></LI> <LI>video encoding from <B>V4L compatible TV tuners</B></LI> @@ -68,7 +68,7 @@ <LI>1, 2 or 3 pass encoding</LI> <LI><B>VBR</B> MP3 audio - <B>IMPORTANT NOTE:</B> VBR MP3 audio doesn't always play nicely on Windows players! On the other hand, currently - <B>MEncoder</B>'s CBR encoding is totally broken on Win32 players :)</LI> + MEncoder's CBR encoding is totally broken on Win32 players :)</LI> <LI>PCM audio</LI> <LI>stream copying</LI> <LI>input A/V synchronizing (PTS-based, can be disabled with -mc 0 option)</LI> @@ -122,20 +122,20 @@ <P><CODE>mencoder <file/DVD> -ovc frameno -oac mp3lame -lameopts vbr=3:more_options -o frameno.avi</CODE></P> <P>An audio-only avi file will be created, containing <B>only</B> the requested audio stream. Don't forget <CODE>-lameopts</CODE>, - if you need to set it. If you were encoding a long movie, <B>MEncoder</B> + if you need to set it. If you were encoding a long movie, MEncoder prints the recommended bitrate values for 650Mb, 700Mb, and 800Mb destination sizes, after this pass finishes.</P></LI> <LI>Second pass: <P><CODE>mencoder <file/DVD> -oac copy -pass 1 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=<bitrate></CODE></P> <P>Alias the first pass of DivX4 video encoding. - Optionally specify the video bitrate <B>MEncoder</B> printed at the end of + Optionally specify the video bitrate MEncoder printed at the end of the previous pass.</P></LI> <LI>Third pass: <P><CODE>mencoder <file/DVD> -oac copy -pass 2 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=<bitrate></CODE></P> <P>Alias the second pass of DivX4 video encoding. - Optionally specify the video bitrate <B>MEncoder</B> printed at the end of + Optionally specify the video bitrate MEncoder printed at the end of the previous pass. In this pass, audio from <CODE>frameno.avi</CODE> will be inserted into the destination file.. and it's all ready!</P></LI> </OL> @@ -187,7 +187,7 @@ <P>The scaling process is handled by the <I>'scale'</I> video filter: <CODE>-vop scale=X:Y</CODE>. Its quality can be set with the - <CODE>-sws</CODE> option. If it's not specified, <B>MEncoder</B> will use 0: + <CODE>-sws</CODE> option. If it's not specified, MEncoder will use 0: fast bilinear.</P> <P>Usage:<BR> @@ -198,14 +198,14 @@ <H4><A NAME="copying">2.4.2.3 Stream copying</A></H4> -<P><B>MEncoder</B> can handle input streams in two ways: <B>encode</B> or +<P>MEncoder can handle input streams in two ways: <B>encode</B> or <B>copy</B> them. This section is about <B>copying</B>.</P> <UL> <LI><B>Video stream</B> (option <CODE>-ovc copy</CODE>): nice stuff can be done :)<BR> Like, putting (not converting) FLI or VIVO or MPEG1 video into - an AVI file. Of course only <B>MPlayer</B> can play such files :) And it + an AVI file. Of course only MPlayer can play such files :) And it probably has no real life value at all. Rationally: video stream copying can be useful for example when only the audio stream has to be encoded (like, uncompressed PCM to MP3).</LI> @@ -220,7 +220,7 @@ <H4><A NAME="fixing">2.4.2.4 Fixing AVIs with broken index or interleaving</A></H4> <P>Easiest thing. We simply copy the video and audio streams, and - <B>MEncoder</B> generates the index. Of course this cannot fix possible bugs + MEncoder generates the index. Of course this cannot fix possible bugs in the video and/or audio streams. It also fixes files with broken interleaving, thus the <CODE>-ni</CODE> option won't be needed for them anymore.</P> @@ -255,17 +255,17 @@ <H4><A NAME="image_files">2.4.2.6 Encoding from multiple input image files (JPEGs, PNGs or TGAs)</A></H4> -<P><B>MEncoder</B> is capable of creating movies from one or more JPEG, PNG or TGA +<P>MEncoder is capable of creating movies from one or more JPEG, PNG or TGA files. With simple framecopy it can create MJPEG (Motion JPEG), MPNG (Motion PNG) or MTGA (Motion TGA) files.</P> Explanation of the process: <OL> - <LI><B>MEncoder</B> <I>decodes</I> the input image(s) with + <LI>MEncoder <I>decodes</I> the input image(s) with <CODE>libjpeg</CODE> (when decoding PNGs, it will use <B>libpng</B>).</LI> - <LI><B>MEncoder</B> then feeds the decoded image to the chosen video compressor + <LI>MEncoder then feeds the decoded image to the chosen video compressor (DivX4, Xvid, ffmpeg msmpeg4, etc...). Watch for the PNG decoder, as currently it can output only to RGB formats, thus can't be used with codecs that require YUV as input, like DivX4 or ffmpeg's msmpeg4.</LI> @@ -303,10 +303,10 @@ <H4><A NAME="vobsub">2.4.2.7 Extracting DVD subtitles to Vobsub file</A></H4> -<P><B>MEncoder</B> is capable of extracting subtitles from a DVD into +<P>MEncoder is capable of extracting subtitles from a DVD into Vobsub fomat files. They consist of a pair of files ending in <CODE>.idx</CODE> and <CODE>.sub</CODE> and are usually packaged in a single - <CODE>.rar</CODE> archive. <B>MPlayer</B> can play these with the + <CODE>.rar</CODE> archive. MPlayer can play these with the <CODE>-vobsub</CODE> and <CODE>-vobsubid</CODE> options.</P> <P>You specify the basename (i.e without the <CODE>.idx</CODE> or @@ -344,7 +344,7 @@ <H3><A NAME="options">2.4.3 Available options</A></H3> -<P>For the complete list of available <B>MEncoder</B> options and examples, +<P>For the complete list of available MEncoder options and examples, please see the man page.</P> </BODY>
--- a/DOCS/faq.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/faq.html Sun Oct 20 12:20:39 2002 +0000 @@ -145,7 +145,7 @@ <DT>Q: It doesn't compile, and it misses uint64_t inttypes.h and similar things ...</DT> - <DD>A: Copy etc/inttypes.h to the <B>MPlayer</B> directory + <DD>A: Copy etc/inttypes.h to the MPlayer directory (<CODE>cp etc/inttypes.h .</CODE>) and try again ...</DD> <DD> </DD> @@ -159,7 +159,7 @@ <DD>A: Read the <A HREF="video.html#mga_vid">mga_vid documentation</A>.</DD> <DD> </DD> - <DT>Q: Are there rpm/deb/... packages of <B>MPlayer</B>?</DT> + <DT>Q: Are there rpm/deb/... packages of MPlayer?</DT> <DD>A: You can make a .deb package for yourself, check the <A HREF="documentation.html#debian">Debian packaging</A> section. There are links to official Red Hat RPM packages available on our @@ -198,10 +198,10 @@ <CODE>Warning: loading mga_vid.o will taint the kernel: no license</CODE></DT> <DD>A: The latest kernel modutils require a flag indicating the license (mainly to avoid kernel hackers debugging closed source drivers). - Upgrade your kernel, modutils and <B>MPlayer</B>.</DD> + Upgrade your kernel, modutils and MPlayer.</DD> <DD> </DD> - <DT>Q: When compiling <B>MEncoder</B>, it segfaults at linking!</DT> + <DT>Q: When compiling MEncoder, it segfaults at linking!</DT> <DD>A: This is a linker problem. Upgrading binutils should help (2.11.92.* or newer should be good). Since it is not our fault, please do <B>not</B> report!</DD> @@ -211,7 +211,7 @@ <DD>A: chmod 644 /usr/lib/libc.so</DD> <DD> </DD> - <DT>Q: I'd like to compile <B>MPlayer</B> on Minix!</DT> + <DT>Q: I'd like to compile MPlayer on Minix!</DT> <DD>A: Me too. :)</DD> </DL> @@ -221,18 +221,18 @@ <DL> - <DT>Q: How do I create a proper patch for <B>MPlayer</B>?</DT> + <DT>Q: How do I create a proper patch for MPlayer?</DT> <DD>A: We made a <A HREF="tech/patches.txt">short document</A> describing all the necessary details. Please follow the instructions.</DD> <DD> </DD> - <DT>Q: How can I support <B>MPlayer</B> development?</DT> + <DT>Q: How can I support MPlayer development?</DT> <DD>A: We are more than happy to accept your hardware and software <A HREF="http://www.mplayerhq.hu/homepage/donations.html">donations</A>. - They help us in continuously improving <B>MPlayer</B>.</DD> + They help us in continuously improving MPlayer.</DD> <DD> </DD> - <DT>Q: How can I become an <B>MPlayer</B> developer?</DT> + <DT>Q: How can I become an MPlayer developer?</DT> <DD>A: We always welcome coders and documenters. Read the <A HREF="tech/">technical documentation</A> to get a first grasp. Then you should subscribe to the @@ -240,7 +240,7 @@ mailing list and start coding.</DD> <DD> </DD> - <DT>Q: Can I run multiple instances of <B>MPlayer</B>?</DT> + <DT>Q: Can I run multiple instances of MPlayer?</DT> <DD>A: Yes. Some video out drivers like xv, dga or (x)mga are exclusive, some are exclusive in combination with certain graphics boards and drivers. You will not be able to run more than one instance of MPlayer with one of those @@ -398,16 +398,16 @@ </PRE> </DT> <DD>A: Probably the audio uses a codec not natively supported by - <B>MPlayer</B>. Install the Win32 codec package as described in the README + MPlayer. Install the Win32 codec package as described in the README or in the <A HREF="documentation.html#installation">Installation</A> section.</DD> <DD> </DD> <DT>Q: ... works with avifile/aviplay but doesn't with MPlayer.</DT> - <DD>A: <B>MPlayer</B> is not avifile. + <DD>A: MPlayer is not avifile. The only common thing between these players is the Win32 DLL loader. The codecs (DLL) set, synchronization, demultiplexing etc is totally different and shouldn't be compared. - If something works with aviplay it doesn't mean that <B>MPlayer</B> will + If something works with aviplay it doesn't mean that MPlayer will work and vice versa.</DD> <DD> </DD> @@ -426,7 +426,7 @@ forces loading libraries to very low addresses. Because l3codeca.acm is a non-relocatable DLL, it must be loaded to 0x00400000, we can't change this. You should use a non-patched kernel, - or use <B>MPlayer</B>'s <CODE>-afm 1</CODE> option to disable using + or use MPlayer's <CODE>-afm 1</CODE> option to disable using l3codeca.acm.</DD> <DD> </DD> @@ -439,10 +439,10 @@ <DT>Q: MPlayer dies with "MPlayer interrupted by signal 4 in module: decode_video".</DT> - <DD>A: Try running <B>MPlayer</B> on the machine you compiled on. Or recompile + <DD>A: Try running MPlayer on the machine you compiled on. Or recompile with runtime CPU detection (<CODE>./configure --enable-runtime-cpudetection</CODE>). Don't - use <B>MPlayer</B> on a CPU different from the one it was compiled on, + use MPlayer on a CPU different from the one it was compiled on, without using the feature mentioned just now.</DD> <DD> </DD> @@ -467,7 +467,7 @@ want to use arts sound, specify audio output via our native arts audio driver (<CODE>-ao arts</CODE>). If it fails or isn't compiled in, try SDL (<CODE>-ao sdl</CODE>) and make sure your SDL can handle arts sound. Yet - another option is to start <B>MPlayer</B> with artsdsp.</DD> + another option is to start MPlayer with artsdsp.</DD> <DD> </DD> <DT>Q: I have an AVI that produces a gray screen when played with @@ -481,7 +481,7 @@ <DD>A: This can have multiple reasons. <UL> <LI>Your CPU <B>and/or</B> video card <B>and/or</B> bus is too slow. - <B>MPlayer</B> displays a message if this is the case (and the dropped + MPlayer displays a message if this is the case (and the dropped frames counter goes up fast).</LI> <LI>If it is an AVI, maybe it has bad interleaving. Try the <CODE>-ni</CODE> option.</LI> @@ -560,7 +560,7 @@ </DT> <DD>A: Are you running KDE or GNOME with the arts or esd sound daemon? Try disabling the sound daemon, or use the <CODE>-ao arts</CODE> switch to make - <B>MPlayer</B> use arts.</DD> + MPlayer use arts.</DD> <DD> </DD> <DT>Q: What about the DGA driver? I can't find it!</DT> @@ -575,7 +575,7 @@ permissions. Help me!</DT> <DD>A: It works only if running as root! It's a DGA limitation. You should become root (<CODE>su -</CODE>), and try again. - Another solution is making <B>MPlayer</B> SUID root, but it's + Another solution is making MPlayer SUID root, but it's <B>not recommended!</B><BR> <CODE>chown root /usr/local/bin/mplayer</CODE><BR> <CODE>chmod 755 /usr/local/bin/mplayer</CODE><BR> @@ -584,7 +584,7 @@ <B>Warning: security risk</B><BR> This is a <B>big</B> security risk! <B>Never</B> do this on a server or on a computer that you do not control completely because other users can - gain root privileges through SUID root <B>MPlayer</B>. <B>You have been + gain root privileges through SUID root MPlayer. <B>You have been warned.</B> </BLOCKQUOTE> </DD> @@ -670,7 +670,7 @@ <DD>A: Who knows ... It's said to work, so please test it and send feedback. Refer to the documentation of libdvdread and its homepage as well. We're not the authors of libdvdread. Use <B>libmpdvdkit2</B>, which is present in - <B>MPlayer</B> source, and used by default.</DD> + MPlayer source, and used by default.</DD> <DD> </DD> <DT>Q: What about subtitles? Can MPlayer display them?</DT> @@ -713,8 +713,8 @@ <DL> - <DT>Q: If <B>MPlayer</B> is paused and I try to seek or press any key at all, - <B>MPlayer</B> ceases to be paused. I would like to be able to seek in the + <DT>Q: If MPlayer is paused and I try to seek or press any key at all, + MPlayer ceases to be paused. I would like to be able to seek in the paused movie.</DT> <DD>A: This is very tricky to implement without losing A/V synchronization. All attempts have failed so far, but patches are welcome.</DD> @@ -740,7 +740,7 @@ <DL> <DT>Q: How can I encode?</DT> - <DD>A: Read the <B>MEncoder</B> <A HREF="encoding.html">documentation</A>.</DD> + <DD>A: Read the MEncoder <A HREF="encoding.html">documentation</A>.</DD> <DD> </DD> <DT>Q: How can I create VCDs?</DT>
--- a/DOCS/formats.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/formats.html Sun Oct 20 12:20:39 2002 +0000 @@ -74,7 +74,7 @@ encourages ASF/WMV. Not that anybody cares.</P> <P>There is a hack that allows AVI files to contain an Ogg Vorbis audio - stream, but makes them incompatible with standard AVI. <B>MPlayer</B> + stream, but makes them incompatible with standard AVI. MPlayer supports playing these files. Seeking is also implemented but severely hampered by badly encoded files with confusing headers. Unfortunately the only encoder currently capable of creating these files, NanDub, has this @@ -82,14 +82,14 @@ <P><B>Note:</B> DV cameras create raw DV streams that DV grabbing utilities convert to two different types of AVI files. The AVI will then contain either - separate audio and video streams that <B>MPlayer</B> can play or the raw DV + separate audio and video streams that MPlayer can play or the raw DV stream for which support is under development.</P> <P>There are two kinds of AVI files:</P> <UL> <LI><B>Interleaved:</B> Audio and video content is interleaved. This is the standard usage. Recommended and mostly used. Some tools create - non-interleaved AVIs with bad sync. <B>MPlayer</B> detects these as + non-interleaved AVIs with bad sync. MPlayer detects these as interleaved, and this climaxes in loss of A/V sync, probably at seeking. These files should be played as non-interleaved (with the <CODE>-ni</CODE> option).</LI> @@ -98,7 +98,7 @@ CD-Rom difficult. (should be played with the <CODE>-ni</CODE> option)</LI> </UL> -<P><B>MPlayer</B> supports two kinds of timings for AVI files:</P> +<P>MPlayer supports two kinds of timings for AVI files:</P> <UL> <LI><B>bps-based</B>: It is based on the bitrate/samplerate of the video/audio stream. This method is used by most players, including <A HREF="http://avifile.sourceforge.net">avifile</A> @@ -125,7 +125,7 @@ variants of ASF, v1.0 and v2.0. v1.0 is used by their media tools (Windows Media Player and Windows Media Encoder) and is very secret. v2.0 is published and patented :). Of course they differ, there is no compatibility at all (it - is just another legal game). <B>MPlayer</B> supports only v1.0, as nobody has + is just another legal game). MPlayer supports only v1.0, as nobody has ever seen v2.0 files :). Note that ASF files nowadays come with the extension .WMA or .WMV.</P> @@ -147,7 +147,7 @@ <H4><A NAME="vivo">2.1.1.5 VIVO files</A></H4> -<P><B>MPlayer</B> happily demuxes VIVO file formats. The biggest disadvantage +<P>MPlayer happily demuxes VIVO file formats. The biggest disadvantage of the format is that it has no index block, nor a fixed packet size or sync bytes and most files lack even keyframes, so forget seeking!</P> @@ -163,7 +163,7 @@ <H4><A NAME="fli">2.1.1.6 FLI files</A></H4> <P><B>FLI</B> is a very old file format used by Autodesk Animator, but it is a - common file format for short animations on the net. <B>MPlayer</B> demuxes + common file format for short animations on the net. MPlayer demuxes and decodes FLI movies and is even able to seek within them (useful when looping with the <CODE>-loop</CODE> option). FLI files do not have keyframes, so the picture will be messy for a short time after seeking.</P> @@ -171,7 +171,7 @@ <H4><A NAME="real">2.1.1.7 RealMedia (RM) files</A></H4> -<P>Yes, <B>MPlayer</B> can read (demux) RealMedia (.rm) files. Seeking works, +<P>Yes, MPlayer can read (demux) RealMedia (.rm) files. Seeking works, but you have to explicitly specify the <CODE>-forceidx</CODE> option (the format supports keyframes). Here are the lists of the supported <A HREF="codecs.html#realvideo">RealVideo</A> @@ -181,11 +181,11 @@ <H4><A NAME="nuppelvideo">2.1.1.8 NuppelVideo files</A></H4> <P><A HREF="http://mars.tuwien.ac.at/~roman/nuppelvideo">NuppelVideo</A> - is a TV grabber tool (AFAIK:). <B>MPlayer</B> can read its .NUV files (only + is a TV grabber tool (AFAIK:). MPlayer can read its .NUV files (only NuppelVideo 5.0). Those files can contain uncompressed YV12, YV12+RTJpeg compressed, YV12 RTJpeg+lzo compressed, and YV12+lzo compressed frames. - <B>MPlayer</B> decodes them all (and also <B>encodes</B> them with - <B>MEncoder</B> to DivX/etc!). Seeking works.</P> + MPlayer decodes them all (and also <B>encodes</B> them with + MEncoder to DivX/etc!). Seeking works.</P> <H4><A NAME="yuv4mpeg">2.1.1.9 yuv4mpeg files</A></H4> @@ -213,7 +213,7 @@ <P>This is a new file format from <A HREF="http://www.xiph.org">Xiphophorus</A>. It can contain any video or audio codec, CBR or VBR. You will need to have <CODE>libogg</CODE> and <CODE>libvorbis</CODE> installed - before compiling <B>MPlayer</B> to be able to play it.</P> + before compiling MPlayer to be able to play it.</P> <H4><A NAME="sdp">2.1.1.13 SDP files</A></H4> @@ -226,15 +226,15 @@ <H3><A NAME="audio_formats">2.1.2 Audio formats</A></H3> -<P><B>MPlayer</B> is a <B>Movie</B> and not a <B>Media</B> player, although +<P>MPlayer is a <B>Movie</B> and not a <B>Media</B> player, although it can play some audio file formats (they are listed in the sections below). - This is not a recommended usage of <B>MPlayer</B>, you better use + This is not a recommended usage of MPlayer, you better use <A HREF="http://www.xmms.org">xmms</A>.</P> <H4><A NAME="mp3">2.1.2.1 MP3 files</A></H4> -<P>You may have problems playing certain MP3 files that <B>MPlayer</B> will +<P>You may have problems playing certain MP3 files that MPlayer will misdetect as MPEGs and play incorrectly or not at all. This cannot be fixed without dropping support for certain broken MPEG files and thus will remain like this for the foreseeable future. The <CODE>-demuxer</CODE> flag
--- a/DOCS/mplayer.1 Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/mplayer.1 Sun Oct 20 12:20:39 2002 +0000 @@ -582,7 +582,7 @@ .I NOTE: .br -Mplayer doesn't accept colons so type dots instead in the device ID +MPlayer doesn't accept colons so type dots instead in the device ID (e.g.\& hw.0,0 instead of hw:0,0). .br Be advised that although you can select any samplerate when using ALSA,
--- a/DOCS/skin.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/skin.html Sun Oct 20 12:20:39 2002 +0000 @@ -55,7 +55,7 @@ <h2><a name="intro">1 Introduction</a></h2> -The purpose of this document is to describe the <b>MPlayer</b> skin format. +The purpose of this document is to describe the MPlayer skin format. The information contained here might be wrong, for <ol type="a"> @@ -78,7 +78,7 @@ <h2><a name="overview">2 Overview</a></h2> It does not really have anything to do with the skin format, but you should -know that <b>MPlayer</b> has <b>no</b> builtin skin, so <b>at least one skin +know that MPlayer has <b>no</b> builtin skin, so <b>at least one skin must be installed in order to be able to use the GUI.</b> @@ -92,7 +92,7 @@ </pre> <p> -Note that the first path may vary according to the way <b>MPlayer</b> was +Note that the first path may vary according to the way MPlayer was configured (see the <code>--prefix</code> and <code>--datadir</code> arguments of the <code>configure</code> script). </p> @@ -112,7 +112,7 @@ <p> In the main window (see below) you can use images with `transparency': Regions filled with the color #FF00FF (<font color="#FF00FF">magenta</font>) -are fully transparent when viewed by <b>MPlayer</b>. This means that you can even +are fully transparent when viewed by MPlayer. This means that you can even have shaped windows if your X server has the XShape extension. </p> @@ -131,7 +131,7 @@ <ul> <li> -The <b>main window</b> is where you can control <b>MPlayer</b>. The background of +The <b>main window</b> is where you can control MPlayer. The background of the window is an image. Various items can (and must) be placed in the window: <em>buttons</em>, <em>potmeters</em> (sliders) and <em>labels</em>. For every item, you must @@ -179,7 +179,7 @@ </li> <li> -The <b>skin menu</b> is just a way to control <b>MPlayer</b> by means of +The <b>skin menu</b> is just a way to control MPlayer by means of menu entries. Two images are required for the menu: one of them is the base image that shows the menu in its normal state, the other one is used to display the selected entries. When you pop up the menu, the first image is @@ -195,7 +195,7 @@ <p> There is an important thing not mentioned yet: For buttons, potmeters and -menu entries to work, <b>MPlayer</b> must know what to do if they are clicked. +menu entries to work, MPlayer must know what to do if they are clicked. This is done by <a href="#guimsg">messages</a> (events). For these items you must define the messages to be generated when they are clicked. </p> @@ -205,7 +205,7 @@ You need the following files to build a skin: <ul> <li> -The configuration file named <a href="#skin">skin</a> tells <b>MPlayer</b> how +The configuration file named <a href="#skin">skin</a> tells MPlayer how to put different parts of the skin together and what to do if you click somewhere in the window. </li> @@ -315,7 +315,7 @@ <p> The name of an image file must be given without leading directories - images are searched for in the <code>Skin</code> directory. You may (but you need not) -specify the extension of the file. If the file does not exist, <b>MPlayer</b> +specify the extension of the file. If the file does not exist, MPlayer tries to load the file <code><filename>.<ext></code>, where <code>tga</code>, <code>TGA</code>, <code>bmp</code>, <code>BMP</code>, <code>png</code> and <code>PNG</code> is tried for <code><ext></code> @@ -350,7 +350,7 @@ </pre> </blockquote> -<b>MPlayer</b> tries to load <code>main</code>, <code>main.tga</code>, +MPlayer tries to load <code>main</code>, <code>main.tga</code>, <code>main.TGA</code>, <code>main.bmp</code> etc, so that <code>main.png</code> will be found. <br> @@ -361,7 +361,7 @@ </pre> </blockquote> then <code>main.bmp</code>, <code>main.bmp.tga</code>, <code>main.bmp.TGA</code>, -<code>main.bmp.bmp</code> would be searched for and <b>MPlayer</b> would finally +<code>main.bmp.bmp</code> would be searched for and MPlayer would finally give up because there is no <code>main.bmp</code> in the directory, only <code>main.png</code>. </td></tr></table>
--- a/DOCS/sound.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/sound.html Sun Oct 20 12:20:39 2002 +0000 @@ -12,7 +12,7 @@ <H3><A NAME="audio">2.3.2 Audio output devices</A></H3> -<P><B>MPlayer</B>'s audio interface is called <I>libao2</I>. It currently +<P>MPlayer's audio interface is called <I>libao2</I>. It currently contains these drivers:</P> <TABLE BORDER=0> @@ -128,17 +128,17 @@ <P>Sharing your sound card with another application like XMMS is <B>strongly discouraged</B>! If the other sound application is using ESD, start - <B>MPlayer</B> with the <CODE>-vo sdl:esd</CODE> option to combine both + MPlayer with the <CODE>-vo sdl:esd</CODE> option to combine both sound streams. In fact, the option <CODE>-vo sdl:esd</CODE> could be used - with ESD even when playing <B>Mplayer</B> alone.</P> + with ESD even when playing MPlayer alone.</P> -<P>Feedback to this document is welcome. Please tell us how <B>MPlayer</B> +<P>Feedback to this document is welcome. Please tell us how MPlayer and your sound card(s) worked together.</P> <H4><A NAME="plugins">2.3.2.2 Audio plugins</A></H4> -<P><B>MPlayer</B> has support for audio plugins. Audio plugins can be used for +<P>MPlayer has support for audio plugins. Audio plugins can be used for changing the properties of the audio data before the sound reaches the sound card. They are enabled using the <CODE>-aop</CODE> switch which takes a <CODE>list=plugin1,plugin2,...</CODE> argument. The <CODE>list</CODE> argument @@ -161,12 +161,12 @@ <P>would set the output frequency of the resample plugin to 44100Hz and the output format of the format plugin to AFMT_U8.</P> -<P>Currently audio plugins can not be used in <B>MEncoder</B>.</P> +<P>Currently audio plugins can not be used in MEncoder.</P> <H5><A NAME="resample">2.3.2.2.1 Up/Downsampling</A></H5> -<P><B>MPlayer</B> fully supports up/downsampling of the sound. This plugin can +<P>MPlayer fully supports up/downsampling of the sound. This plugin can be used if you have a fixed frequency sound card or if you are stuck with an old sound card that is only capable of max 44.1kHz. Limitations in your hardware are not auto detected, so you have to specify @@ -186,7 +186,7 @@ <H5><A NAME="surround_decoding">2.3.2.2.2 Surround Sound decoding</A></H5> -<P><B>MPlayer</B> has an audio plugin that can decode matrix encoded +<P>MPlayer has an audio plugin that can decode matrix encoded surround sound. Dolby Surround is an example of a matrix encoded format. Many files with 2 channel audio actually contain matrixed surround sound. To use this feature you need a sound card supporting at least 4 channels.</P> @@ -222,7 +222,7 @@ <P>This plugin is a software replacement for the volume control, and can be used on machines with a broken mixer device. It can also be - used if one wants to change the output volume of <B>MPlayer</B> + used if one wants to change the output volume of MPlayer without changing the PCM volume setting in the mixer. It has one switch <CODE>volume</CODE> that is used for setting the initial sound level. The initial sound level can be set to values between 0
--- a/DOCS/users_against_developers.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/users_against_developers.html Sun Oct 20 12:20:39 2002 +0000 @@ -43,7 +43,7 @@ <A HREF="http://www.atnf.csiro.au/people/rgooch/linux/docs/kernel-newsflash.html"> Linux kernel news flash about kernel 2.4.17</A> and <A HREF="http://www.voy.com/3516/572.html">Voy Forum</A>. - <B>MPlayer</B> also suffered from intermittent problems that were all solved by + MPlayer also suffered from intermittent problems that were all solved by switching to a different version of GCC. Several projects started implementing workarounds for some of the 2.96 issues, but we refused to fix other people's bugs, especially since some workarounds may imply a performance penalty.</P> @@ -77,7 +77,7 @@ <OL> <LI>Go to the <A HREF="http://gcc.gnu.org/mirrors.html">GCC mirrors page</A> page and download <CODE>gcc-core-3.1.tar.gz</CODE>. This includes the - complete C compiler and is sufficient for <B>MPlayer</B>. If you also want + complete C compiler and is sufficient for MPlayer. If you also want C++, Java or some of the other advanced GCC features <CODE>gcc-3.1.tar.gz</CODE> may better suit your needs.</LI> <LI>Extract the archive with<BR> @@ -100,12 +100,12 @@ <H2><A NAME="binary">Binary distribution</A></H2> <P>This was the second big problem but has been solved as of version - 0.90-pre1. <B>MPlayer</B> previously contained source from the OpenDivX project, + 0.90-pre1. MPlayer previously contained source from the OpenDivX project, which disallows binary redistribution. This code has been removed and you are now welcome to create binary packages as you see fit.</P> <P>Another impediment to binary redistribution was compiletime optimizations - for CPU architecture. <B>MPlayer</B> now supports runtime CPU detection + for CPU architecture. MPlayer now supports runtime CPU detection (specify the <CODE>--enable-runtime-cpudetection</CODE> option when compiling). It is disabled by default because it implies a small speed sacrifice, it is now possible to create binaries that run on different @@ -138,12 +138,12 @@ <P>Joe Barr became infamous by writing a less than favorable <A HREF="http://www.linuxworld.com/site-stories/2001/1214.mplayer.html"> - <B>MPlayer</B> review</A>. He found <B>MPlayer</B> hard to install, but then + MPlayer review</A>. He found MPlayer hard to install, but then again he is not very fond of <A HREF="http://www.linuxworld.com/linuxworld/lw-2000-06/lw-06-exam.html">reading documentation</A>. He also concluded that the developers were unfriendly and the documentation incomplete and insulting. You be the judge. - He went on to mention <B>MPlayer</B> negatively in his + He went on to mention MPlayer negatively in his <A HREF="http://www.linuxworld.com/site-stories/2001/1227.predictions.html">10 Linux predictions for 2002</A> In a followup <A HREF="http://www.linuxworld.com/site-stories/2002/0125.xine.html">review of xine</A> @@ -153,7 +153,7 @@ <BLOCKQUOTE> However, he also went on to say that he was "surprised" by my column about - Mplayer and thought it was unfair, reminding me that it is a free software + MPlayer and thought it was unfair, reminding me that it is a free software project. "If you don't like it," Bartsch said, "you're free not to use it." </BLOCKQUOTE>
--- a/DOCS/video.html Sun Oct 20 11:34:06 2002 +0000 +++ b/DOCS/video.html Sun Oct 20 12:20:39 2002 +0000 @@ -123,9 +123,9 @@ (...etc...) </PRE> <P>It must support YUY2 packed, and YV12 planar pixel formats to be - usable with <B>MPlayer</B>.</P> + usable with MPlayer.</P> </LI> - <LI>And finally, check if <B>MPlayer</B> was compiled with 'xv' support. + <LI>And finally, check if MPlayer was compiled with 'xv' support. ./configure prints this.</LI> </UL> @@ -179,7 +179,7 @@ refresh rate. If playing seems to be slow, try disabling VSYNC somehow, or set refresh rate to n*(fps of the movie) Hz.</LI> <LI>Radeon VE - currently only XFree86 CVS has driver for this card, version - 4.1.0 doesn't. And no TV out support. Of course with <B>MPlayer</B> you can + 4.1.0 doesn't. And no TV out support. Of course with MPlayer you can happily get <B>accelerated</B> display, with or without <B>TV output</B>, and no libraries or X are needed. Read <A HREF="#vidix">Vidix</A> section.</LI> </UL> @@ -215,7 +215,7 @@ <H5><A NAME="dga_summary">2.3.1.3.1 Summary</A></H5> <P>This document tries to explain in some words what DGA is in general and what - the DGA video output driver for <B>MPlayer</B> can do (and what it + the DGA video output driver for MPlayer can do (and what it can't).</P> @@ -226,7 +226,7 @@ Technically spoken this happens by mapping the framebuffer memory into the memory range of your process. This is allowed by the kernel only if you have superuser privileges. You can get these either by logging in - as root or by setting the SUID bit on the <B>MPlayer</B> executable (<B>not + as root or by setting the SUID bit on the MPlayer executable (<B>not recommended</B>).</P> <P>There are two versions of DGA: DGA1 is used by XFree 3.x.x and DGA2 was @@ -252,7 +252,7 @@ <P> <CODE>(II) Loading extension XFree86-DGA</CODE></P> -<P>See, XFree86 4.0.x or greater is VERY RECOMMENDED! <B>MPlayer</B>'s DGA +<P>See, XFree86 4.0.x or greater is VERY RECOMMENDED! MPlayer's DGA driver is autodetected on ./configure, or you can force it with --enable-dga.</P> @@ -261,7 +261,7 @@ the movie fits in. There is no converter right now :(</P> <P>Become root. DGA needs root access to be able to write directly to video - memory. If you want to run it as user, then install <B>MPlayer</B> SUID + memory. If you want to run it as user, then install MPlayer SUID root:</P> <P><CODE> @@ -275,7 +275,7 @@ <B>Warning: security risk</B><BR> This is a <B>big</B> security risk! <B>Never</B> do this on a server or on a computer that can be accessed by other people because they can gain root - privileges through SUID root <B>MPlayer</B>. + privileges through SUID root MPlayer. </BLOCKQUOTE> <P>Now use the <CODE>-vo dga</CODE> option, and there you go (hope so :))! @@ -303,10 +303,10 @@ <H5><A NAME="dga_mplayer">2.3.1.3.5 DGA & MPlayer</A></H5> -<P>DGA is used in two places with <B>MPlayer</B>: The SDL driver can be made to +<P>DGA is used in two places with MPlayer: The SDL driver can be made to make use of it (-vo sdl:dga) and within the DGA driver (-vo dga). The above said is true for both; in the following sections I'll explain how the DGA - driver for <B>MPlayer</B> works.</P> + driver for MPlayer works.</P> <H5><A NAME="dga_features">2.3.1.3.6 Features of the DGA driver</A></H5> @@ -352,7 +352,7 @@ <P>Generally spoken, DGA framebuffer access should be at least as fast as using the X11 driver with the additional benefit of getting a fullscreen image. - The percentage speed values printed by <B>MPlayer</B> have to be interpreted + The percentage speed values printed by MPlayer have to be interpreted with some care, as for example, with the X11 driver they do not include the time used by the X-Server needed for the actual drawing. Hook a terminal to a serial line of your box and start top to see what is really going on in your @@ -426,7 +426,7 @@ <H5><A NAME="dga_bug_reports">2.3.1.3.B Bug Reports</A></H5> <P>If you experience troubles with the DGA driver please feel free to file - a bug report to me (e-mail address below). Please start <B>MPlayer</B> with + a bug report to me (e-mail address below). Please start MPlayer with the -v option and include all lines in the bug report that start with vo_dga:</P> @@ -446,7 +446,7 @@ (for example) video driver to use with the SDL_VIDEODRIVER environment variable. Well, in theory.</P> -<P>With <B>MPlayer</B>, we used its X11 driver's software scaler ability for +<P>With MPlayer, we used its X11 driver's software scaler ability for cards/drivers that doesn't support XVideo, until we made our own (faster, nicer) software scaler. Also we used its aalib output, but now we have ours which is more comfortable. Its DGA mode was better than ours, until @@ -494,7 +494,7 @@ <H4>Installation</H4> <P>You'll have to install svgalib and its development package in order for - <B>MPlayer</B> build its SVGAlib driver (autodetected, but can be forced), + MPlayer build its SVGAlib driver (autodetected, but can be forced), and don't forget to edit /etc/vga/libvga.config to suit your card & monitor.</P> @@ -506,7 +506,7 @@ <H4>EGA (4bpp) support</H4> -<P>SVGAlib incorporates EGAlib, and <B>MPlayer</B> has the possibility to +<P>SVGAlib incorporates EGAlib, and MPlayer has the possibility to display any movie in 16 colors, thus usable in the following sets:</P> <UL> @@ -575,7 +575,7 @@ </UL> <P>NOTE: FBdev video mode changing _does not work_ with the VESA framebuffer, - and don't ask for it, since it's not an <B>MPlayer</B> limitation.</P> + and don't ask for it, since it's not an MPlayer limitation.</P> <H4><A NAME="mga_vid">2.3.1.7 Matrox framebuffer (mga_vid)</A></H4> @@ -608,9 +608,9 @@ under <CODE>/lib/modules/<kernel version>/somewhere</CODE>.</P> <P>Then run</P> <P><CODE>depmod -a</CODE></P></LI> - <LI>Now you have to (re)compile <B>MPlayer</B>, <CODE>configure</CODE> will + <LI>Now you have to (re)compile MPlayer, <CODE>configure</CODE> will detect <CODE>/dev/mga_vid</CODE> and build the 'mga' driver. Using it from - <B>MPlayer</B> goes by <CODE>-vo mga</CODE> if you have matroxfb console, + MPlayer goes by <CODE>-vo mga</CODE> if you have matroxfb console, or <CODE>-vo xmga</CODE> under XFree86 3.x.x or 4.x.x.</LI> </OL> @@ -630,7 +630,7 @@ <H4><A NAME="opengl">2.3.1.9 OpenGL output</A></H4> -<P><B>MPlayer</B> supports displaying movies using OpenGL, but if your +<P>MPlayer supports displaying movies using OpenGL, but if your platform/driver supports xv as should be the case on a PC with Linux, use xv instead, OpenGL performance is considerably worse. If you have an X11 implementation without xv support, OpenGL is a viable alternative.</P> @@ -650,7 +650,7 @@ <P><B>AAlib</B> is a library for displaying graphics in text mode, using powerful ASCII renderer. There are LOTS of programs already supporting it, like Doom, - Quake, etc. <B>MPlayer</B> contains a very usable driver for it. + Quake, etc. MPlayer contains a very usable driver for it. If ./configure detects aalib installed, the aalib libvo driver will be built.</P> @@ -663,7 +663,7 @@ <TR><TD></TD><TD><CODE>5</CODE></TD><TD></TD><TD>switch fast rendering on/off</TD></TR> <TR><TD></TD><TD><CODE>6</CODE></TD><TD></TD><TD>set dithering mode (none, error distribution, Floyd Steinberg)</TD></TR> <TR><TD></TD><TD><CODE>7</CODE></TD><TD></TD><TD>invert image</TD></TR> - <TR><TD></TD><TD><CODE>a</CODE></TD><TD></TD><TD>toggles between aa and <B>MPlayer</B> control)</TD></TR> + <TR><TD></TD><TD><CODE>a</CODE></TD><TD></TD><TD>toggles between aa and MPlayer control)</TD></TR> </TABLE> <P><B>The following command line options can be used:</B></P> @@ -782,7 +782,7 @@ <UL> <LI>If you have installed <B>NLS</B> font on your Linux box and run VESA - driver from text-mode then after terminating <B>MPlayer</B> you will have + driver from text-mode then after terminating MPlayer you will have <B>ROM font</B> loaded instead of national. You can load national font again by using <B><I>setsysfont</I></B> utility from the Mandrake distribution for example.<BR> @@ -867,11 +867,11 @@ AAlib for that).<BR> <I>Note: Everyone can try this trick by commenting out mode switching in vo_vesa driver.</I></LI> - <LI><B>MPlayer</B>'s video output driver should know active video mode and be + <LI>MPlayer's video output driver should know active video mode and be able to tell to VIDIX subdevice some video characteristics of server.</LI> </UL> -I hope that probably every video output driver of <B>MPlayer</B> will +I hope that probably every video output driver of MPlayer will recognize <CODE>:vidix</CODE> subdevice. <H4>USAGE METHODS</H4> @@ -879,7 +879,7 @@ <P>When VIDIX is used as <B>subdevice</B> (<CODE>-vo vesa:vidix</CODE>) then video mode configuration is performed by video output device (<B>vo_server</B> in short). Therefore you can pass into command line of - <B>MPlayer</B> the same keys as for vo_server. In addition it understands + MPlayer the same keys as for vo_server. In addition it understands <CODE>-double</CODE> key as globally visible parameter. (I recommend using this key with VIDIX at least for ATI's card).<BR> As for <CODE>-vo xvidix</CODE>: currently it recognizes the following @@ -897,7 +897,7 @@ But it's dangerous, and you shouldn't do that. In this case given driver will be forced and result is unpredictable (it may <B>freeze</B> your computer). You should do that ONLY if you are absolutely sure it will work, - and <B>MPlayer</B> doesn't do it automatically. Please tell about it to the + and MPlayer doesn't do it automatically. Please tell about it to the developers. The Right Way is to use VIDIX without arguments to enable driver autodetection.</P> @@ -910,14 +910,14 @@ <B>Warning: security risk</B><BR> Unfortunately you <B>must</B> have <B>root</B> privileges to use VIDIX due to direct hardware access. At least the <B>SUID</B> bit on the - <B>MPlayer</B> executable must be set. + MPlayer executable must be set. </BLOCKQUOTE> <H4>VIDEO EQUALIZER</H4> <P>This is a video equalizer implemented especially for VIDIX. You can use it either with <B>1-8</B> keys as described in the man page, or - by command line arguments. <B>MPlayer</B> recognizes the + by command line arguments. MPlayer recognizes the following options:</P> <DL> @@ -1044,13 +1044,13 @@ <P>Finally an important remark: Do not start or stop XawTV on the playback device during playback, it will crash your computer. It is, however, fine to - <B>FIRST</B> start XawTV, <B>THEN</B> start <B>MPlayer</B>, wait for - <B>MPlayer</B> to finish and <B>THEN</B> stop XawTV.</P> + <B>FIRST</B> start XawTV, <B>THEN</B> start MPlayer, wait for + MPlayer to finish and <B>THEN</B> stop XawTV.</P> <H4><A NAME="dvb">2.3.1.15 DVB</A></H4> -<P><B>MPlayer</B> supports cards with the Siemens DVB chipset from vendors like +<P>MPlayer supports cards with the Siemens DVB chipset from vendors like Siemens, Technotrend, Galaxis or Hauppauge. The latest DVB drivers are available from the <A HREF="http://www.linuxtv.org">Linux TV site</A>. If you want to do software transcoding you should have at least a 1GHz CPU.</P> @@ -1153,7 +1153,7 @@ <H4><A NAME="dxr3">2.3.1.16 DXR3/Hollywood+</A></H4> -<P><B>MPlayer</B> supports hardware accelerated playback with the Creative DXR3 +<P>MPlayer supports hardware accelerated playback with the Creative DXR3 and Sigma Designs Hollywood Plus cards. These cards both use the em8300 MPEG decoder chip from Sigma Designs.</P> @@ -1169,10 +1169,10 @@ <DD><CODE>noprebuf</CODE> turns off prebuffering. Prebuffering is a feature of the em8300 chip that enables it to hold more than one frame of video at a time. This means that when you are running with prebuffering (default) - <B>MPlayer</B> will try to keep the video buffer filled with data at all - times. If you are on a slow machine <B>MPlayer</B> will probably use close + MPlayer will try to keep the video buffer filled with data at all + times. If you are on a slow machine MPlayer will probably use close to, or precisely 100% of CPU. This is especially common if you play pure MPEG - streams (like DVDs, SVCDs a.s.o.) since <B>MPlayer</B> will not have to + streams (like DVDs, SVCDs a.s.o.) since MPlayer will not have to reencode it to MPEG it will fill the buffer very fast.<BR> With prebuffering video playback is <B>much</B> less sensitive to other programs hogging the CPU, it will not drop frames unless applications hog @@ -1219,12 +1219,12 @@ <H4>Overlay</H4> <P>To get overlay run dxr3view that comes with the em8300 package before - starting <B>MPlayer</B>. You can set various options in dxr3view by pressing + starting MPlayer. You can set various options in dxr3view by pressing <CODE>T</CODE> while holding the mouse cursor above the window.</P> <H4>MPEG1, MPEG2, VCD and DVD Notes</H4> -<P>MPEG1/2 content should now automatically be detected by <B>MPlayer</B> and +<P>MPEG1/2 content should now automatically be detected by MPlayer and it will use the hardware acceleration of the DXR3 to play it. If not, you can force it to hardware acceleration with <CODE>-vc mpegpes</CODE>. Also, if you plan to use postprocessing filters you must use <CODE>-vc mpeg12</CODE>.</P> @@ -1234,7 +1234,7 @@ known bug. The em8300 will also improperly handle subtitles that are too big, and may hang for a second or two. At this time, the only workaround is to use <CODE>-vc mpeg12</CODE> when viewing DVDs with subtitles. When running with - <CODE>-vc mpeg12</CODE> <B>MPlayer</B> will reencode video to MPEG (even if it + <CODE>-vc mpeg12</CODE> MPlayer will reencode video to MPEG (even if it already is MPEG). This means that it will need more CPU power, and you might loose some picture quality.</P> @@ -1276,7 +1276,7 @@ <CODE>TVout/fbset</CODE> and type <CODE>make</CODE>. Install <CODE>fbset</CODE> into somewhere in your PATH.</LI> <LI> - Then enter into the <CODE>TVout/</CODE> directory in the <B>MPlayer</B> + Then enter into the <CODE>TVout/</CODE> directory in the MPlayer source, and execute <CODE>./modules</CODE> as root. Your text-mode console will enter into framebuffer mode (no way back!).</LI> <LI>Next, EDIT and run the <CODE>./matroxtv</CODE> script. This will present you @@ -1339,7 +1339,7 @@ <A HREF="http://gatos.sf.net">gatos</A>.</LI> <LI><B>ASIC Radeon VIVO</B>: supported by <A HREF="http://gatos.sf.net">gatos</A>.</LI> - <LI><B>Radeon</B> and <B>Rage128</B>: supported by <B>MPlayer</B>! + <LI><B>Radeon</B> and <B>Rage128</B>: supported by MPlayer! Check <a href="#vesa">VESA driver</a> and <A HREF="#vidix">VIDIX</A> sections.</LI> </UL>