changeset 15496:99b823247dfd

Synced to 1.60
author jheryan
date Tue, 17 May 2005 12:35:58 +0000
parents da4a935a3412
children f51726118f57
files DOCS/xml/cs/ports.xml
diffstat 1 files changed, 597 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/DOCS/xml/cs/ports.xml	Tue May 17 12:35:58 2005 +0000
@@ -0,0 +1,597 @@
+<?xml version="1.0" encoding="iso-8859-2"?>
+<!-- Synced with: 1.60 -->
+<chapter id="ports" xreflabel="Ports">
+<title>Porty</title>
+
+<sect1 id="linux">
+<title>Linux</title>
+<para>
+Hlavní vývojovou platformou je Linux na x86, ačkoli
+<application>MPlayer</application> pracuje na mnoha jiných portech Linuxu.
+Binární balíčky <application>MPlayer</application>u jsou dostupné z několika
+zdrojů. Nicméně <emphasis role="bold">není žádný z těchto balíčků podporován</emphasis>.
+Hlaste tedy problémy jejich autorům, nikoli nám.
+</para>
+
+<sect2 id="debian">
+<title>Vytvoření balíčku pro Debian</title>
+<para>
+Pro vytvoření balíčku pro Debian spusťte následující příkaz v adresáři se
+zdrojovým kódem <application>MPlayer</application>u:
+
+<screen>fakeroot debian/rules binary</screen>
+
+Pokud chcete předat nějaké volby pro configure, můžete nastavit proměnnou
+prostředí <envar>DEB_BUILD_OPTIONS</envar>. Například, pokud chcete GUI a
+podporu OSD menu, měli byste použít:
+
+<screen>DEB_BUILD_OPTIONS="--enable-gui --enable-menu" fakeroot debian/rules binary</screen>
+
+Rovněž můžete předat některé proměnné do Makefile. Například, pokud chcete
+kompilovat pomocí gcc 3.4 i v případě, že to není výchozí kompilátor:
+
+<screen>CC=gcc-3.4 DEB_BUILD_OPTIONS="--enable-gui" fakeroot debian/rules binary</screen>
+
+K vyčistění zdrojového stromu spusťte následující příkaz:
+
+<screen>fakeroot debian/rules clean</screen>
+
+Jako root můžete nainstalovat <filename>.deb</filename> balíček obvyklým
+způsobem:
+
+<screen>dpkg -i ../mplayer_<replaceable>version</replaceable>.deb</screen>
+</para>
+
+<para>
+Christian Marillat vytvářel jistou dobu neoficiální Debianí balíčky
+<application>MPlayer</application>u, <application>MEncoder</application>u a
+našich bitmapových fontů, můžete si je stáhnout (apt-get) z
+<ulink url="http://hpisi.nerim.net/">jeho domácí stránky</ulink>.
+</para>
+</sect2>
+
+<sect2 id="rpm">
+<title>Balení RPM</title>
+<para>
+Dominik Mierzejewski vytvořil a udržuje oficiální Red Hat RPM balíčky
+<application>MPlayer</application>u. Tz jsou dostupné z jeho
+<ulink url="http://greysector.rangers.eu.org/mplayer.html">domácí stránky</ulink>.
+</para>
+
+<para>
+RPM balíčky pro Mandrake jsou dostupné z
+<ulink url="http://plf.zarb.org/">P.L.F.</ulink>.
+SuSE zařadilo do své distribuce zmrzačenou verzi
+<application>MPlayer</application>u. V posledních verzích ji odstranili. Funkční
+RPM naleznete na
+<ulink url="http://packman.links2linux.de/?action=128">links2linux.de</ulink>.
+</para>
+</sect2>
+
+<sect2 id="arm">
+<title>ARM</title>
+<para>
+<application>MPlayer</application> pracuje na Linuxových PDA s ARM CPU např.
+Sharp Zaurus, Compaq Ipaq. Nejjednodušší způsob jak si opatřit
+<application>MPlayer</application> je, stáhnout si jej z některého
+<ulink url="http://www.openzaurus.org">OpenZaurus</ulink> balíčkového kanálu.
+Pokud si jej chcete skompilovat sami, měli byste nahlédnout do adresáře
+<ulink url="http://openzaurus.bkbits.net:8080/buildroot/src/packages/mplayer?nav=index.html|src/.|src/packages">mplayer</ulink>
+a
+<ulink url="http://openzaurus.bkbits.net:8080/buildroot/src/packages/libavcodec?nav=index.html|src/.|src/packages">libavcodec</ulink>
+v buildroot OpenZaurus distribuce. Zde mají vždy poslední Makefile a patche používané
+pro sestavení CVS verze <application>MPlayer</application>u s
+<systemitem class="library">libavcodec</systemitem>em.
+Pokud potřebujete GUI rozhraní, můžete použít xmms-embedded.
+</para>
+</sect2>
+</sect1>
+
+<sect1 id="bsd">
+<title>*BSD</title>
+<para>
+<application>MPlayer</application> běží na FreeBSD, OpenBSD, NetBSD,
+BSD/OS a Darwinu. Existují portované/pkgsrc/fink/atd verze
+<application>MPlayer</application>u, které lze pravděpodobně snadněji použít,
+než naše surové zdrojové kódy.
+</para>
+
+<para>
+K sestavení <application>MPlayer</application>u budete potřebovat GNU make
+(gmake - nativní BSD make nebude pracovat) a současnou verzi binutils.
+</para>
+
+<para>
+Pokud si <application>MPlayer</application> stěžuje, že nemůže najít
+<filename>/dev/cdrom</filename> nebo <filename>/dev/dvd</filename>,
+vytvořte příslušný symbolický link:
+<screen>ln -s /dev/<replaceable>vaše_cdrom_zařízení</replaceable> /dev/cdrom</screen>
+</para>
+
+<para>
+Chcete-li používat Win32 DLL v <application>MPlayer</application>u, budete muset
+rekompilovat jádro s volbou &quot;<envar>USER_LDT</envar>&quot;
+(pokud nepoužíváte FreeBSD-CURRENT, kde je to výchozí).
+</para>
+
+
+<sect2 id="freebsd">
+<title>FreeBSD</title>
+<para>
+Pokud váš procesor má SSE, rekompilujte jádro s volbami
+&quot;<envar>CPU_ENABLE_SSE</envar>&quot; (vyžaduje FreeBSD-STABLE nebo patche
+do jádra).
+</para>
+</sect2>
+
+<sect2 id="openbsd">
+<title>OpenBSD</title>
+<para>
+Vzhledem k omezením v různých verzích gas (GNU assembleru &ndash; pozn. překl.)
+(relokace vs MMX), budete muset kompilovat ve dvou krocích:
+Nejprve se ujistěte že je nenativní as jako první ve vaší <envar>$PATH</envar>
+a proveďte <command>gmake -k</command>, pak zajistěte, aby se použila nativní
+verze a proveďte <command>gmake</command>.
+</para>
+<para>
+Od OpenBSD 3.4 není již výše uvedená metoda potřeba.
+</para>
+</sect2>
+
+<sect2 id="darwin">
+<title>Darwin</title>
+<para>
+Viz sekce <link linkend="macos">Mac OS</link>.
+</para>
+</sect2>
+</sect1>
+
+<sect1 id="solaris">
+<title>Sun Solaris</title>
+<para>
+<application>MPlayer</application> by měl běžet na Solarisu 2.6 nebo novějším.
+Použijte SUN audio rozhraní pomocí volby <option>-ao sun</option> pro přehrávání
+zvuku.
+</para>
+
+<para>
+On <emphasis role="bold">UltraSPARCs</emphasis>, <application>MPlayer</application>
+takes advantage of their <emphasis role="bold">VIS</emphasis> extensions
+(equivalent to MMX), currently only in
+<systemitem class="library">libmpeg2</systemitem>,
+<systemitem class="library">libvo</systemitem>
+and <systemitem class="library">libavcodec</systemitem>, but not in
+<systemitem class="library">mp3lib</systemitem>. You can watch a VOB file
+on a 400MHz CPU. You'll need
+<ulink url="http://www.sun.com/sparc/vis/mediaLib.html"><systemitem class="library">mLib</systemitem></ulink>
+installed.
+</para>
+
+<para>
+To build the package you will need GNU <application>make</application>
+(<filename>gmake</filename>, <filename>/opt/sfw/gmake</filename>), native
+Solaris make will not work. Typical error you get when building with
+Solaris' make instead of GNU make:
+<screen>
+   % /usr/ccs/bin/make
+   make: Fatal error in reader: Makefile, line 25: Unexpected end of line seen
+</screen>
+</para>
+
+<para>
+On Solaris SPARC, you need the GNU C/C++ Compiler; it does not matter if
+GNU C/C++ compiler is configured with or without the GNU assembler.
+</para>
+
+<para>
+On Solaris x86, you need the GNU assembler and the GNU C/C++ compiler,
+configured to use the GNU assembler! The <application>MPlayer</application>
+code on the x86 platform makes heavy use of MMX, SSE and 3DNOW! instructions
+that cannot be compiled using Sun's assembler <filename>/usr/ccs/bin/as</filename>.
+</para>
+
+<para>
+The <filename>configure</filename> script tries to find out, which
+assembler program is used by your &quot;gcc&quot; command (in case the autodetection
+fails, use the <option>--as=<replaceable>/wherever/you/have/installed/gnu-as</replaceable></option>
+option to tell the <filename>configure</filename> script where it can find GNU
+"as" on your system).
+</para>
+
+<para>
+Error message from <filename>configure</filename> on a Solaris x86 system using
+GCC without GNU assembler:
+<screen>
+   % configure
+   ...
+   Checking assembler (/usr/ccs/bin/as) ... , failed
+   Please upgrade(downgrade) binutils to 2.10.1...
+</screen>
+(Solution: Install and use a gcc configured with <option>--with-as=gas</option>)
+</para>
+
+<para>
+Typical error you get when building with a GNU C compiler that does not use GNU as:
+<screen>
+   % gmake
+   ...
+   gcc -c -Iloader -Ilibvo -O4 -march=i686 -mcpu=i686 -pipe -ffast-math
+        -fomit-frame-pointer  -I/usr/local/include   -o mplayer.o mplayer.c
+   Assembler: mplayer.c
+   "(stdin)", line 3567 : Illegal mnemonic
+   "(stdin)", line 3567 : Syntax error
+   ... more "Illegal mnemonic" and "Syntax error" errors ...
+</screen>
+</para>
+
+<para>
+Due to bugs in Solaris 8, you may not be able to play DVD discs larger than 4 GB:
+</para>
+
+<itemizedlist>
+<listitem><para>
+The sd(7D) driver on Solaris 8 x86 has a bug when accessing a disk block >4GB
+on a device using a logical blocksize != DEV_BSIZE (i.e. CD-ROM and DVD media).
+Due to a 32Bit int overflow, a disk address modulo 4GB is accessed
+(<ulink url="http://groups.yahoo.com/group/solarisonintel/message/22516"/>).
+This problem does not exist in the SPARC version of Solaris 8.
+</para></listitem>
+
+<listitem><para>
+A similar bug is present in the hsfs(7FS) filesystem code (AKA ISO9660),
+hsfs may not not support partitions/disks larger than 4GB, all data is
+accessed modulo 4GB
+(<ulink url="http://groups.yahoo.com/group/solarisonintel/message/22592"/>).
+The hsfs problem can be fixed by installing patch 109764-04 (sparc) / 109765-04 (x86).
+</para></listitem>
+</itemizedlist>
+</sect1>
+
+<sect1 id="irix">
+<title>Silicon Graphics Irix</title>
+<para>
+You can either try to install the GNU install program, and (if you did
+not put it in your global path) then point to the location with:
+<screen>./configure --with-install=<replaceable>/path/and/name/of/install</replaceable></screen>
+</para>
+
+<para>
+Or you can use the default install delivered with IRIX 6.5 in which case
+you will have to edit the <filename>Makefile</filename> by hand a little bit.
+Change the following two lines:
+<programlisting>
+  $(INSTALL) -c -m 644 DOCS/mplayer.1 $(MANDIR)/man1/mplayer.1
+
+  $(INSTALL) -c -m 644 etc/codecs.conf $(CONFDIR)/codecs.conf
+</programlisting>
+to:
+<programlisting>
+  $(INSTALL) -m 644 mplayer.1 $(MANDIR)/man1/
+
+  $(INSTALL) -m 644 codecs.conf $(CONFDIR)/
+</programlisting>
+And then do (from within the <application>MPlayer</application> source dir):
+<screen>cp DOCS/mplayer.1 . ; cp etc/codecs.conf .</screen>
+and then go on with building and installing.
+</para>
+</sect1>
+
+
+<sect1 id="hp-ux">
+<title>HP-UX</title>
+<para>
+Joe Page hosts a detailed HP-UX <application>MPlayer</application>
+<ulink url="http://users.rcn.com/joepage/mplayer_on_hpux11.htm">HOWTO</ulink>
+by Martin Gansser on his homepage. With these instructions the build should
+work out of the box. The following information is taken from this HOWTO.
+</para>
+
+<para>
+You need GCC 3.4.0 or later, GNU make 3.80 or later and SDL 1.2.7 or later.
+HP cc will not produce a working program, prior GCC versions are buggy.
+For OpenGL functionality you need to install Mesa and the gl and gl2 video
+output drivers should work, speed may be very bad, depending on the CPU speed,
+though. A good replacement for the rather poor native HP-UX sound system is
+GNU esound.
+</para>
+
+<para>
+Create the DVD device
+scan the SCSI bus with:
+</para>
+
+<screen>
+# ioscan -fn
+
+Class          I            H/W   Path          Driver    S/W State    H/W Type        Description
+...
+ext_bus 1    8/16/5      c720  CLAIMED INTERFACE  Built-in SCSI
+target  3    8/16/5.2    tgt   CLAIMED DEVICE
+disk    4    8/16/5.<emphasis role="bold">2</emphasis>.<emphasis role="bold">0</emphasis>  sdisk CLAIMED DEVICE     <emphasis role="bold">PIONEER DVD-ROM DVD-305</emphasis>
+                         /dev/dsk/c1t2d0 <emphasis role="bold">/dev/rdsk/c1t2d0</emphasis>
+target  4    8/16/5.7    tgt   CLAIMED DEVICE
+ctl     <emphasis role="bold">1</emphasis>    8/16/5.7.0  sctl  CLAIMED DEVICE     Initiator
+                         /dev/rscsi/c1t7d0 /dev/rscsi/c1t7l0 /dev/scsi/c1t7l0
+...
+</screen>
+
+<para>
+The screen output shows a Pioneer DVD-ROM at SCSI address 2.
+The card instance for hardware path 8/16 is 1.
+</para>
+
+<para>
+Create a link from the raw device to the DVD device.
+</para>
+
+<screen>
+# ln -s /dev/rdsk/c<replaceable>&lt;SCSI bus instance&gt;</replaceable>t<replaceable>&lt;SCSI target ID&gt;</replaceable>d<replaceable>&lt;LUN&gt;</replaceable> /dev/<replaceable>&lt;device&gt;</replaceable>
+</screen>
+
+<para>
+Example:
+</para>
+
+<screen>
+# ln -s /dev/rdsk/c1t2d0 /dev/dvd
+</screen>
+
+<para>
+Below are solutions for some common problems:
+</para>
+
+<itemizedlist>
+<listitem>
+<para>
+Crash at Start with the following error message:
+<screen>
+/usr/lib/dld.sl: Unresolved symbol: finite (code) from /usr/local/lib/gcc-lib/hppa2.0n-hp-hpux11.00/3.2/../../../libGL.sl
+</screen>
+</para>
+
+<para>
+This means that the function <systemitem>.finite().</systemitem> is not
+available in the standard HP-UX math library.
+Instead there is <systemitem>.isfinite().</systemitem>.
+Solution: Use the latest Mesa depot file.
+</para>
+</listitem>
+
+<listitem>
+<para>
+Crash at playback with the following error message:
+<screen>
+/usr/lib/dld.sl: Unresolved symbol: sem_init (code) from /usr/local/lib/libSDL-1.2.sl.0
+</screen>
+</para>
+
+<para>
+Solution: Use the extralibdir option of configure
+<option>--with-extralibdir="/usr/lib -lrt"</option>
+</para>
+</listitem>
+
+<listitem>
+<para>
+MPlayer segfaults with a message like this:
+<screen>
+Pid 10166 received a SIGSEGV for stack growth failure.
+Possible causes: insufficient memory or swap space, or stack size exceeded maxssiz.
+Segmentation fault
+</screen>
+</para>
+
+<para>
+Solution:
+The HP-UX kernel has a default stack size of 8MB(?) per process.(11.0 and
+newer 10.20 patches let you increase <systemitem>maxssiz</systemitem> up to
+350MB for 32-bit programs). You need to extend <systemitem>maxssiz</systemitem>
+and recompile the kernel (and reboot). You can use SAM to do this. (While at
+it, check out the <systemitem>maxdsiz</systemitem> parameter for the maximum
+amount of data a program can use. It depends on your applications, if the
+default of 64MB is enough or not.)
+</para>
+</listitem>
+</itemizedlist>
+
+</sect1>
+
+
+<sect1 id="qnx">
+<title>QNX</title>
+<para>
+Works. You'll need to download SDL for QNX, and install it. Then run
+<application>MPlayer</application> with <option>-vo sdl:photon</option>
+and <option>-ao sdl:nto</option> options, and it should be fast.
+</para>
+
+<para>
+The <option>-vo x11</option> output will be even slower than on Linux,
+since QNX has only X <emphasis>emulation</emphasis> which is VERY slow. Use SDL.
+</para>
+</sect1>
+
+<sect1 id="windows">
+<title>Windows</title>
+
+<para>Yes, <application>MPlayer</application> runs on Windows under
+  <ulink url="http://www.cygwin.com/"><application>Cygwin</application></ulink> and
+  <ulink url="http://www.mingw.org/"><application>MinGW</application></ulink>.
+  It does not have a GUI yet, but the command line version is almost completely
+  functional. <ulink url="../../tech/patches.txt">Patches</ulink> are always welcome.
+  You should check out the
+  <ulink url="http://mplayerhq.hu/mailman/listinfo/mplayer-cygwin/">mplayer-cygwin</ulink>
+  mailing list for help and latest information.</para>
+
+<para>Best results are achieved with the native DirectX video output driver
+  (<option>-vo directx</option>) and the native Windows waveout audio driver
+  (<option>-ao win32</option>). Alternatives are OpenGL and SDL, but OpenGL
+  performance varies greatly between systems and SDL is known to
+  distort sound and video or crash on some systems. If the image is
+  distorted, try turning off hardware acceleration with
+  <option>-vo directx:noaccel</option>. Download
+  <ulink url="http://www.mplayerhq.hu/MPlayer/releases/win32-beta/contrib/dx7headers.tgz">DirectX 7 header files</ulink>
+  to compile the DirectX video output driver. Furthermore you need to have
+  DirectX 7 or later installed for the DirectX video output driver to work.
+  </para>
+
+<para><link linkend="vidix">VIDIX</link> now works under Windows as
+  <option>-vo winvidix</option>, although it is still experimental
+  and needs a bit of manual setup. Download
+  <ulink url="http://www.mplayerhq.hu/MPlayer/releases/win32-beta/dhahelperwin/dhahelper.sys">dhahelper.sys</ulink> or
+  <ulink url="http://www.mplayerhq.hu/MPlayer/releases/win32-beta/dhahelperwin/withmtrr/dhahelper.sys">dhahelper.sys (with MTRR support)</ulink>
+  and copy it to the
+  <filename class="directory">libdha/dhahelperwin</filename> directory in your
+  <application>MPlayer</application> source tree.
+  Open a console and change to that directory. Then type
+
+  <screen>gcc -o dhasetup.exe dhasetup.c</screen>
+
+  and execute
+
+  <screen>dhasetup.exe install</screen>
+
+  as Administrator. After that you will have to reboot. When you are
+  done, copy the <systemitem class="library">.so</systemitem> files from
+  <filename class="directory">vidix/drivers</filename> to the
+  <filename class="directory">mplayer/vidix</filename> directory
+  relative to your <filename>mplayer.exe</filename>.</para>
+
+<para>For best results <application>MPlayer</application> should use a
+  colorspace that your video card supports in hardware. Unfortunately many
+  Windows graphics drivers wrongly report some colorspaces as supported in
+  hardware. To find out which, try
+
+  <screen>mplayer -benchmark -nosound -frames 100 -vf format=<replaceable>colorspace</replaceable> <replaceable>movie</replaceable></screen>
+
+  where <replaceable>colorspace</replaceable> can be any colorspace
+  printed by the <option>-vf format=fmt=help</option> option. If you
+  find a colorspace your card handles particularly bad
+  <option>-vf noformat=<replaceable>colorspace</replaceable></option>
+  will keep it from being used. Add this to your config file to permanently
+  keep it from being used.</para>
+
+<para>There are special codec packages for Windows available on our
+  <ulink url="http://mplayerhq.hu/homepage/design7/codecs.html">codecs page</ulink>
+  to allow playing formats for which there is no native support yet.
+  Put the codecs somewhere in your path or pass
+  <option>--with-codecsdir=<replaceable>c:/path/to/your/codecs</replaceable></option>
+  (alternatively
+  <option>--with-codecsdir=<replaceable>/path/to/your/codecs</replaceable></option>
+  only on <application>Cygwin</application>) to <filename>configure</filename>.
+  We have had some reports that Real DLLs need to be writable by the user
+  running <application>MPlayer</application>, but only on some systems (NT4).
+  Try making them writable if you have problems.</para>
+
+<para>You can play VCDs by playing the <filename>.DAT</filename> or <filename>.MPG</filename> files
+  that Windows exposes on VCDs. It works like this (adjust for the drive letter
+  of your CD-ROM):</para>
+
+<screen>mplayer <replaceable>d:/mpegav/avseq01.dat</replaceable></screen>
+
+<para>DVDs also work, adjust <option>-dvd-device</option> for the drive letter
+  of your DVD-ROM:</para>
+
+<screen>mplayer dvd://<replaceable>&lt;title&gt;</replaceable> -dvd-device <replaceable>d</replaceable>:</screen>
+
+<para>The <application>Cygwin</application>/<application>MinGW</application>
+  console is rather slow. Redirecting output or using the
+  <option>-quiet</option> option has been reported to improve performance on
+  some systems. Direct rendering (<option>-dr</option>) may also help.
+  You can prevent OSD flicker through double buffering with the
+  <option>-double</option> option. If playback is jerky, try
+  <option>-autosync 100</option>. If some of these options help you, you
+  may want to put them in your config file.</para>
+
+<para>Sascha Sommer releases official Windows binaries from time to time,
+  Joey Parrish makes unofficial Windows packages complete with installer.
+  Look for these in the Windows section of
+  <ulink url="http://www.mplayerhq.hu/homepage/design7/projects.html#windows">our projects page</ulink>.</para>
+
+<sect2 id="cygwin">
+<title><application>Cygwin</application></title>
+
+<para>You need to run <application>Cygwin</application> 1.5.0 or later in
+  order to compile <application>MPlayer</application>.</para>
+
+<para>DirectX header files need to be extracted to <filename class="directory">/usr/include/</filename> or
+  <filename class="directory">/usr/local/include/</filename>.</para>
+
+<para>Instructions and files for making SDL run under
+  <application>Cygwin</application> can be found on the
+  <ulink url="http://www.libsdl.org/extras/win32/cygwin/">libsdl site</ulink>.</para>
+
+</sect2>
+
+
+<sect2 id="mingw">
+<title><application>MinGW</application></title>
+
+<para>Installing a version of <application>MinGW</application> that could
+  compile <application>MPlayer</application> used to be quite tricky, but it
+  works out of the box now. Just install <application>MinGW</application>
+  3.1.0 or later and MSYS 1.0.9 or later and tell the MSYS postinstall that
+  <application>MinGW</application> is installed.</para>
+
+<para>Extract DirectX header files to <filename class="directory">/mingw/include/</filename>.</para>
+
+<para>MOV compressed header support requires
+  <ulink url="http://www.gzip.org/zlib/">zlib</ulink>, which
+  <application>MinGW</application> does not provide by default.
+  Configure it with <option>--prefix=/mingw</option> and install
+  it before compiling <application>MPlayer</application>.</para>
+
+</sect2>
+
+
+</sect1>
+
+<sect1 id="macos">
+<title>Mac OS</title>
+<para>
+Only Mac OS X 10.2 and up is supported by the "raw"
+<application>MPlayer</application> source. Feel free to make support for older
+Mac OS versions and send patches!
+</para>
+
+<para>
+Apple's modified GCC 3.x is preferred for compiling
+<application>MPlayer</application> especially when using
+<systemitem class="library">libavcodec</systemitem> as Apple's
+modified GCC 2.95.x doesn't support C99 syntax well.
+</para>
+
+<para>
+One can get an Aqua GUI for <application>MPlayer</application> together with
+compiled <application>MPlayer</application> binaries for Mac OS X from the
+<ulink url="http://mplayerosx.sf.net/">MPlayerOSX</ulink> project.
+</para>
+</sect1>
+
+<sect1 id="amiga">
+<title>Amiga/MorphOS (GeekGadgets)</title>
+<para>
+Nicholas Det at Genesi has done a big and powerful port of <application>MPlayer
+</application> for MorphOS. Sadly it's based on the 0.90 series.
+</para>
+
+<para>
+Get if from <ulink url="http://www.morphzone.org/">MorphZone</ulink>:
+<itemizedlist>
+<listitem><para>
+<ulink url="http://www.morphzone.org/modules/mydownloads/singlefile.php?lid=90">
+<application>MPlayer</application> 0.91 binary</ulink>
+</para></listitem>
+<listitem><para>
+<ulink url="http://www.morphzone.org/modules/mydownloads/singlefile.php?lid=91">
+<application>MPlayer</application> 0.91 source</ulink>
+</para></listitem>
+<listitem><para>
+<ulink url="http://www.morphzone.org/modules/mydownloads/singlefile.php?lid=92">
+<application>MEncoder</application> 1.0pre3 binary</ulink>
+</para></listitem>
+</itemizedlist>
+</para>
+</sect1>
+
+</chapter>