Mercurial > mplayer.hg
changeset 18234:a107276371a8
Part 5 and final of otvos attila's oattila AT chello-hu mp_msg changes, with lots of corrections
author | reynaldo |
---|---|
date | Mon, 24 Apr 2006 04:23:53 +0000 |
parents | 30fcc199bec7 |
children | 6fa6d986a863 |
files | help/help_mp-en.h libvo/aspect.c libvo/mga_common.c libvo/vesa_lvo.c libvo/video_out.c libvo/vo_3dfx.c libvo/vo_dxr3.c libvo/vo_mga.c libvo/vo_null.c libvo/vo_png.c libvo/vo_sdl.c libvo/vo_svga.c libvo/vo_syncfb.c libvo/vo_tdfx_vid.c libvo/vo_tdfxfb.c libvo/vo_tga.c libvo/vo_vesa.c libvo/vo_x11.c libvo/vo_xv.c libvo/vosub_vidix.c |
diffstat | 20 files changed, 596 insertions(+), 331 deletions(-) [+] |
line wrap: on
line diff
--- a/help/help_mp-en.h Sun Apr 23 23:28:46 2006 +0000 +++ b/help/help_mp-en.h Mon Apr 24 04:23:53 2006 +0000 @@ -1563,3 +1563,250 @@ // libmpcodecs/vf_test.c, vf_yuy2.c, vf_yvu9.c #define MSGTR_MPCODECS_WarnNextFilterDoesntSupport "%s not supported by next filter/vo :(\n" + +// ================================== LIBMPVO ==================================== + +// mga_common.c + +#define MSGTR_LIBVO_MGA_ErrorInConfigIoctl "Error in mga_vid_config ioctl (wrong mga_vid.o version?)" +#define MSGTR_LIBVO_MGA_CouldNotGetLumaValuesFromTheKernelModule "Could not get luma values from the kernel module!\n" +#define MSGTR_LIBVO_MGA_CouldNotSetLumaValuesFromTheKernelModule "Could not set luma values from the kernel module!\n" +#define MSGTR_LIBVO_MGA_ScreenWidthHeightUnknown "Screen width/height unknown!\n" +#define MSGTR_LIBVO_MGA_MgaInvalidOutputFormat "Invalid output format %0X.\n" +#define MSGTR_LIBVO_MGA_IncompatibleDriverVersion "Your mga_vid driver version is incompatible with this MPlayer version!\n" +#define MSGTR_LIBVO_MGA_UsingBuffers "Using %d buffers.\n" +#define MSGTR_LIBVO_MGA_CouldntOpen "Couldn't open: %s\n" + +// libvo/vesa_lvo.c + +#define MSGTR_LIBVO_VESA_ThisBranchIsNoLongerSupported "[VESA_LVO] This branch is no longer supported.\n[VESA_LVO] Please use -vo vesa:vidix instead.\n" +#define MSGTR_LIBVO_VESA_CouldntOpen "[VESA_LVO] Couldn't open: '%s'\n" +#define MSGTR_LIBVO_VESA_InvalidOutputFormat "[VESA_LVI] Invalid output format: %s(%0X)\n" +#define MSGTR_LIBVO_VESA_IncompatibleDriverVersion "[VESA_LVO] Your fb_vid driver version is incompatible with this MPlayer version!\n" + +// libvo/vo_3dfx.c + +#define MSGTR_LIBVO_3DFX_Only16BppSupported "[VO_3DFX] Only 16bpp supported!" +#define MSGTR_LIBVO_3DFX_VisualIdIs "[VO_3DFX] Visual id is %lx.\n" +#define MSGTR_LIBVO_3DFX_UnableToOpenDevice "[VO_3DFX] Unable to open /dev/3dfx.\n" +#define MSGTR_LIBVO_3DFX_Error "[VO_3DFX] Error: %d.\n" +#define MSGTR_LIBVO_3DFX_CouldntMapMemoryArea "[VO_3DFX] Couldn't map 3dfx memory areas: %p,%p,%d.\n" +#define MSGTR_LIBVO_3DFX_DisplayInitialized "[VO_3DFX] Initialized: %p.\n" +#define MSGTR_LIBVO_3DFX_UnknownSubdevice "[VO_3DFX] Unknown subdevice: %s.\n" + +// libvo/vo_dxr3.c + +#define MSGTR_LIBVO_DXR3_UnableToLoadNewSPUPalette "[VO_DXR3] Unable to load new SPU palette!\n" +#define MSGTR_LIBVO_DXR3_UnableToSetPlaymode "[VO_DXR3] Unable to set playmode!\n" +#define MSGTR_LIBVO_DXR3_UnableToSetSubpictureMode "[VO_DXR3] Unable to set subpicture mode!\n" +#define MSGTR_LIBVO_DXR3_UnableToGetTVNorm "[VO_DXR3] Unable to get TV norm!\n" +#define MSGTR_LIBVO_DXR3_AutoSelectedTVNormByFrameRate "[VO_DXR3] Auto-selected TV norm by frame rate: " +#define MSGTR_LIBVO_DXR3_UnableToSetTVNorm "[VO_DXR3] Unable to set TV norm!\n" +#define MSGTR_LIBVO_DXR3_SettingUpForNTSC "[VO_DXR3] Setting up for NTSC.\n" +#define MSGTR_LIBVO_DXR3_SettingUpForPALSECAM "[VO_DXR3] Setting up for PAL/SECAM.\n" +#define MSGTR_LIBVO_DXR3_SettingAspectRatioTo43 "[VO_DXR3] Setting aspect ratio to 4:3.\n" +#define MSGTR_LIBVO_DXR3_SettingAspectRatioTo169 "[VO_DXR3] Setting aspect ratio to 16:9.\n" +#define MSGTR_LIBVO_DXR3_OutOfMemory "[VO_DXR3] Out of memory.\n" +#define MSGTR_LIBVO_DXR3_UnableToAllocateKeycolor "[VO_DXR3] Unable to allocate keycolor!\n" +#define MSGTR_LIBVO_DXR3_UnableToAllocateExactKeycolor "[VO_DXR3] Unable to allocate exact keycolor, using closest match (0x%lx).\n" +#define MSGTR_LIBVO_DXR3_Uninitializing "[VO_DXR3] Uninitializing.\n" +#define MSGTR_LIBVO_DXR3_FailedRestoringTVNorm "[VO_DXR3] Failed restoring TV norm!\n" +#define MSGTR_LIBVO_DXR3_EnablingPrebuffering "[VO_DXR3] Enabling prebuffering.\n" +#define MSGTR_LIBVO_DXR3_UsingNewSyncEngine "[VO_DXR3] Using new sync engine.\n" +#define MSGTR_LIBVO_DXR3_UsingOverlay "[VO_DXR3] Using overlay.\n" +#define MSGTR_LIBVO_DXR3_ErrorYouNeedToCompileMplayerWithX11 "[VO_DXR3] Error: You need to compile mplayer with x11 libraries and headers installed to use overlay.\n" +#define MSGTR_LIBVO_DXR3_WillSetTVNormTo "[VO_DXR3] Will set TV norm to: " +#define MSGTR_LIBVO_DXR3_AutoAdjustToMovieFrameRatePALPAL60 "Auto-adjust to movie frame rate (PAL/PAL-60)" +#define MSGTR_LIBVO_DXR3_AutoAdjustToMovieFrameRatePALNTSC "Auto-adjust to movie frame rate (PAL/NTSC)" +#define MSGTR_LIBVO_DXR3_UseCurrentNorm "Use current norm" +#define MSGTR_LIBVO_DXR3_UseUnknownNormSuppliedCurrentNorm "Unknown norm supplied. Use current norm." +#define MSGTR_LIBVO_DXR3_ErrorOpeningForWritingTrying "[VO_DXR3] Error opening %s for writing, trying /dev/em8300 instead.\n" +#define MSGTR_LIBVO_DXR3_ErrorOpeningForWritingTryingMV "[VO_DXR3] Error opening %s for writing, trying /dev/em8300_mv instead.\n" +#define MSGTR_LIBVO_DXR3_ErrorOpeningForWritingAsWell "[VO_DXR3] Error opening /dev/em8300 for writing as well!\nBailing.\n" +#define MSGTR_LIBVO_DXR3_ErrorOpeningForWritingAsWellMV "[VO_DXR3] Error opening /dev/em8300_mv for writing as well!\nBailing.\n" +#define MSGTR_LIBVO_DXR3_Opened "[VO_DXR3] Opened: %s.\n" +#define MSGTR_LIBVO_DXR3_ErrorOpeningForWritingTryingSP "[VO_DXR3] Error opening %s for writing, trying /dev/em8300_sp instead.\n" +#define MSGTR_LIBVO_DXR3_ErrorOpeningForWritingAsWellSP "[VO_DXR3] Error opening /dev/em8300_sp for writing as well!\nBailing.\n" +#define MSGTR_LIBVO_DXR3_UnableToOpenDisplayDuringHackSetup "[VO_DXR3] Unable to open display during overlay hack setup!\n" +#define MSGTR_LIBVO_DXR3_UnableToInitX11 "[VO_DXR3] Unable to init x11!\n" +#define MSGTR_LIBVO_DXR3_FailedSettingOverlayAttribute "[VO_DXR3] Failed setting overlay attribute.\n" +#define MSGTR_LIBVO_DXR3_FailedSettingOverlayScreen "[VO_DXR3] Failed setting overlay screen!\nExiting.\n" +#define MSGTR_LIBVO_DXR3_FailedEnablingOverlay "[VO_DXR3] Failed enabling overlay!\nExiting.\n" +#define MSGTR_LIBVO_DXR3_FailedResizingOverlayWindow "[VO_DXR3] Failed resizing overlay window!\n" +#define MSGTR_LIBVO_DXR3_FailedSettingOverlayBcs "[VO_DXR3] Failed setting overlay bcs!\n" +#define MSGTR_LIBVO_DXR3_FailedGettingOverlayYOffsetValues "[VO_DXR3] Failed getting overlay Y-offset values!\nExiting.\n" +#define MSGTR_LIBVO_DXR3_FailedGettingOverlayXOffsetValues "[VO_DXR3] Failed getting overlay X-offset values!\nExiting.\n" +#define MSGTR_LIBVO_DXR3_FailedGettingOverlayXScaleCorrection "[VO_DXR3] Failed getting overlay X scale correction!\nExiting.\n" +#define MSGTR_LIBVO_DXR3_YOffset "[VO_DXR3] Yoffset: %d.\n" +#define MSGTR_LIBVO_DXR3_XOffset "[VO_DXR3] Xoffset: %d.\n" +#define MSGTR_LIBVO_DXR3_XCorrection "[VO_DXR3] Xcorrection: %d.\n" +#define MSGTR_LIBVO_DXR3_FailedResizingOverlayWindow "[VO_DXR3] Failed resizing overlay window!\n" +#define MSGTR_LIBVO_DXR3_FailedSetSignalMix "[VO_DXR3] Failed set signal mix!\n" + +// libvo/vo_mga.c + +#define MSGTR_LIBVO_MGA_AspectResized "[VO_MGA] aspect(): resized to %dx%d.\n" +#define MSGTR_LIBVO_MGA_Uninit "[VO] uninit!\n" + +// libvo/vo_null.c + +#define MSGTR_LIBVO_NULL_UnknownSubdevice "[VO_NULL] Unknown subdevice: %s.\n" + +// libvo/vo_png.c + +#define MSGTR_LIBVO_PNG_Warning1 "[VO_PNG] Warning: compression level set to 0, compression disabled!\n" +#define MSGTR_LIBVO_PNG_Warning2 "[VO_PNG] Info: Use -vo png:z=<n> to set compression level from 0 to 9.\n" +#define MSGTR_LIBVO_PNG_Warning3 "[VO_PNG] Info: (0 = no compression, 1 = fastest, lowest - 9 best, slowest compression)\n" +#define MSGTR_LIBVO_PNG_ErrorOpeningForWriting "\n[VO_PNG] Error opening '%s' for writing!\n" +#define MSGTR_LIBVO_PNG_ErrorInCreatePng "[VO_PNG] Error in create_png.\n" + +// libvo/vo_sdl.c + +#define MSGTR_LIBVO_SDL_CouldntGetAnyAcceptableSDLModeForOutput "[VO_SDL] Couldn't get any acceptable SDL Mode for output.\n" +#define MSGTR_LIBVO_SDL_SetVideoModeFailed "[VO_SDL] set_video_mode: SDL_SetVideoMode failed: %s.\n" +#define MSGTR_LIBVO_SDL_SetVideoModeFailedFull "[VO_SDL] Set_fullmode: SDL_SetVideoMode failed: %s.\n" +#define MSGTR_LIBVO_SDL_MappingI420ToIYUV "[VO_SDL] Mapping I420 to IYUV.\n" +#define MSGTR_LIBVO_SDL_UnsupportedImageFormat "[VO_SDL] Unsupported image format (0x%X).\n" +#define MSGTR_LIBVO_SDL_InfoPleaseUseVmOrZoom "[VO_SDL] Info - please use -vm or -zoom to switch to best resolution.\n" +#define MSGTR_LIBVO_SDL_FailedToSetVideoMode "[VO_SDL] Failed to set video mode: %s.\n" +#define MSGTR_LIBVO_SDL_CouldntCreateAYUVOverlay "[VO_SDL] Couldn't create a YUV overlay: %s.\n" +#define MSGTR_LIBVO_SDL_CouldntCreateARGBSurface "[VO_SDL] Couldn't create an RGB surface: %s.\n" +#define MSGTR_LIBVO_SDL_UsingDepthColorspaceConversion "[VO_SDL] Using depth/colorspace conversion, this will slow things down (%ibpp -> %ibpp).\n" +#define MSGTR_LIBVO_SDL_UnsupportedImageFormatInDrawslice "[VO_SDL] Unsupported image format in draw_slice, contact MPlayer developers!\n" +#define MSGTR_LIBVO_SDL_BlitFailed "[VO_SDL] Blit failed: %s.\n" +#define MSGTR_LIBVO_SDL_InitializingOfSDLFailed "[VO_SDL] Initializing of SDL failed: %s.\n" +#define MSGTR_LIBVO_SDL_UsingDriver "[VO_SDL] Using driver: %s.\n" + +// libvo/vobsub_vidix.c + +#define MSGTR_LIBVO_SUB_VIDIX_CantStartPlayback "[VO_SUB_VIDIX] Can't start playback: %s\n" +#define MSGTR_LIBVO_SUB_VIDIX_CantStopPlayback "[VO_SUB_VIDIX] Can't stop playback: %s\n" +#define MSGTR_LIBVO_SUB_VIDIX_InterleavedUvForYuv410pNotSupported "[VO_SUB_VIDIX] Interleaved uv for yuv410p not supported.\n" +#define MSGTR_LIBVO_SUB_VIDIX_DummyVidixdrawsliceWasCalled "[VO_SUB_VIDIX] Dummy vidix_draw_slice() was called.\n" +#define MSGTR_LIBVO_SUB_VIDIX_DummyVidixdrawframeWasCalled "[VO_SUB_VIDIX] Dummy vidix_draw_frame() was called.\n" +#define MSGTR_LIBVO_SUB_VIDIX_UnsupportedFourccForThisVidixDriver "[VO_SUB_VIDIX] Unsupported fourcc for this vidix driver: %x (%s).\n" +#define MSGTR_LIBVO_SUB_VIDIX_VideoServerHasUnsupportedResolution "[VO_SUB_VIDIX] Video server has unsupported resolution (%dx%d), supported: %dx%d-%dx%d.\n" +#define MSGTR_LIBVO_SUB_VIDIX_VideoServerHasUnsupportedColorDepth "[VO_SUB_VIDIX] Video server has unsupported color depth by vidix (%d).\n" +#define MSGTR_LIBVO_SUB_VIDIX_DriverCantUpscaleImage "[VO_SUB_VIDIX] Vidix driver can't upscale image (%d%d -> %d%d).\n" +#define MSGTR_LIBVO_SUB_VIDIX_DriverCantDownscaleImage "[VO_SUB_VIDIX] Vidix driver can't downscale image (%d%d -> %d%d).\n" +#define MSGTR_LIBVO_SUB_VIDIX_CantConfigurePlayback "[VO_SUB_VIDIX] Can't configure playback: %s.\n" +#define MSGTR_LIBVO_SUB_VIDIX_YouHaveWrongVersionOfVidixLibrary "[VO_SUB_VIDIX] You have wrong version of VIDIX library.\n" +#define MSGTR_LIBVO_SUB_VIDIX_CouldntFindWorkingVidixDriver "[VO_SUB_VIDIX] Couldn't find working VIDIX driver.\n" +#define MSGTR_LIBVO_SUB_VIDIX_CouldntGetCapability "[VO_SUB_VIDIX] Couldn't get capability: %s.\n" +#define MSGTR_LIBVO_SUB_VIDIX_Description "[VO_SUB_VIDIX] Description: %s.\n" +#define MSGTR_LIBVO_SUB_VIDIX_Author "[VO_SUB_VIDIX] Author: %s.\n" + +// libvo/vo_svga.c + +#define MSGTR_LIBVO_SVGA_ForcedVidmodeNotAvailable "[VO_SVGA] Forced vid_mode %d (%s) not available.\n" +#define MSGTR_LIBVO_SVGA_ForcedVidmodeTooSmall "[VO_SVGA] Forced vid_mode %d (%s) too small.\n" +#define MSGTR_LIBVO_SVGA_Vidmode "[VO_SVGA] Vid_mode: %d, %dx%d %dbpp.\n" +#define MSGTR_LIBVO_SVGA_VgasetmodeFailed "[VO_SVGA] Vga_setmode(%d) failed.\n" +#define MSGTR_LIBVO_SVGA_VideoModeIsLinearAndMemcpyCouldBeUsed "[VO_SVGA] Video mode is linear and memcpy could be used for image transfer.\n" +#define MSGTR_LIBVO_SVGA_VideoModeHasHardwareAcceleration "[VO_SVGA] Video mode has hardware acceleration and put_image could be used.\n" +#define MSGTR_LIBVO_SVGA_IfItWorksForYouIWouldLineToKnow "[VO_SVGA] If it works for you i would like to know. \n[VO_SVGA] (send log with `mplayer test.avi -v -v -v -v &> svga.log`). Thx\n" +#define MSGTR_LIBVO_SVGA_VideoModeHas "[VO_SVGA] Video mode has %d page(s).\n" +#define MSGTR_LIBVO_SVGA_CenteringImageStartAt "[VO_SVGA] Centering image. start at (%d,%d)\n" +#define MSGTR_LIBVO_SVGA_UsingVidix "[VO_SVGA] Using VIDIX. w=%i h=%i mw=%i mh=%i\n" + +// libvo/vo_syncfb.c + +#define MSGTR_LIBVO_SYNCFB_CouldntOpen "[VO_SYNCFB] Couldn't open /dev/syncfb or /dev/mga_vid.\n" +#define MSGTR_LIBVO_SYNCFB_UsingPaletteYuv420p3 "[VO_SYNCFB] Using palette yuv420p3.\n" +#define MSGTR_LIBVO_SYNCFB_UsingPaletteYuv420p2 "[VO_SYNCFB] Using palette yuv420p2.\n" +#define MSGTR_LIBVO_SYNCFB_UsingPaletteYuv420 "[VO_SYNCFB] Using palette yuv420.\n" +#define MSGTR_LIBVO_SYNCFB_NoSupportedPaletteFound "[VO_SYNCFB] No supported palette found.\n" +#define MSGTR_LIBVO_SYNCFB_BesSourcerSize "[VO_SYNCFB] BES Sourcer size: %d x %d.\n" +#define MSGTR_LIBVO_SYNCFB_FramebufferMemory "[VO_SYNCFB] Framebuffer memory: %ld in %ld buffers.\n" +#define MSGTR_LIBVO_SYNCFB_RequestingFirstBuffer "[VO_SYNCFB] Requesting first buffer #%d.\n" +#define MSGTR_LIBVO_SYNCFB_GotFirstBuffer "[VO_SYNCFB] Got first buffer #%d.\n" +#define MSGTR_LIBVO_SYNCFB_UnknownSubdevice "[VO_SYNCFB] Unknown subdevice: %s.\n" + +// libvo/vo_tdfxfb.c + +#define MSGTR_LIBVO_TDFXFB_CantOpen "[VO_TDFXFB] Can't open %s: %s.\n" +#define MSGTR_LIBVO_TDFXFB_ProblemWithFbitgetFscreenInfo "[VO_TDFXFB] Problem with FBITGET_FSCREENINFO ioctl: %s.\n" +#define MSGTR_LIBVO_TDFXFB_ProblemWithFbitgetVscreenInfo "[VO_TDFXFB] Problem with FBITGET_VSCREENINFO ioctl: %s.\n" +#define MSGTR_LIBVO_TDFXFB_ThisDriverIsOnlySupports "[VO_TDFXFB] This driver is only supports the 3Dfx Banshee, Voodoo3 and Voodoo 5.\n" +#define MSGTR_LIBVO_TDFXFB_OutputIsNotSupported "[VO_TDFXFB] %d bpp output is not supported.\n" +#define MSGTR_LIBVO_TDFXFB_CouldntMapMemoryAreas "[VO_TDFXFB] Couldn't map memory areas: %s.\n" +#define MSGTR_LIBVO_TDFXFB_BppOutputIsNotSupported "[VO_TDFXFB] %d bpp output is not supported (This should never have happened).\n" +#define MSGTR_LIBVO_TDFXFB_SomethingIsWrongWithControl "[VO_TDFXFB] Eik! Something's wrong with control().\n" +#define MSGTR_LIBVO_TDFXFB_NotEnoughVideoMemoryToPlay "[VO_TDFXFB] Not enough video memory to play this movie. Try at a lower resolution.\n" +#define MSGTR_LIBVO_TDFXFB_ScreenIs "[VO_TDFXFB] Screen is %dx%d at %d bpp, in is %dx%d at %d bpp, norm is %dx%d.\n" + +// libvo/vo_tdfx_vid.c + +#define MSGTR_LIBVO_TDFXVID_Move "[VO_TDXVID] Move %d(%d) x %d => %d.\n" +#define MSGTR_LIBVO_TDFXVID_AGPMoveFailedToClearTheScreen "[VO_TDFXVID] AGP move failed to clear the screen.\n" +#define MSGTR_LIBVO_TDFXVID_BlitFailed "[VO_TDFXVID] Blit failed.\n" +#define MSGTR_LIBVO_TDFXVID_NonNativeOverlayFormatNeedConversion "[VO_TDFXVID] Non-native overlay format needs conversion.\n" +#define MSGTR_LIBVO_TDFXVID_UnsupportedInputFormat "[VO_TDFXVID] Unsupported input format 0x%x.\n" +#define MSGTR_LIBVO_TDFXVID_OverlaySetupFailed "[VO_TDFXVID] Overlay setup failed.\n" +#define MSGTR_LIBVO_TDFXVID_OverlayOnFailed "[VO_TDFXVID] Overlay on failed.\n" +#define MSGTR_LIBVO_TDFXVID_OverlayReady "[VO_TDFXVID] Overlay ready: %d(%d) x %d @ %d => %d(%d) x %d @ %d.\n" +#define MSGTR_LIBVO_TDFXVID_TextureBlitReady "[VO_TDFXVID] Texture blit ready: %d(%d) x %d @ %d => %d(%d) x %d @ %d.\n" +#define MSGTR_LIBVO_TDFXVID_OverlayOffFailed "[VO_TDFXVID] Overlay off failed\n" +#define MSGTR_LIBVO_TDFXVID_CantOpen "[VO_TDFXVID] Can't open %s: %s.\n" +#define MSGTR_LIBVO_TDFXVID_CantGetCurrentCfg "[VO_TDFXVID] Can't get current cfg: %s.\n" +#define MSGTR_LIBVO_TDFXVID_MemmapFailed "[VO_TDFXVID] Memmap failed !!!!!\n" +#define MSGTR_LIBVO_TDFXVID_GetImageTodo "Get image todo.\n" +#define MSGTR_LIBVO_TDFXVID_AgpMoveFailed "[VO_TDFXVID] AGP move failed.\n" +#define MSGTR_LIBVO_TDFXVID_SetYuvFailed "[VO_TDFXVID] Set yuv failed.\n" +#define MSGTR_LIBVO_TDFXVID_AgpMoveFailedOnYPlane "[VO_TDFXVID] AGP move failed on Y plane.\n" +#define MSGTR_LIBVO_TDFXVID_AgpMoveFailedOnUPlane "[VO_TDFXVID] AGP move failed on U plane.\n" +#define MSGTR_LIBVO_TDFXVID_AgpMoveFailedOnVPlane "[VO_TDFXVID] AGP move failed on V plane.\n" +#define MSGTR_LIBVO_TDFXVID_WhatsThatForAFormat "[VO_TDFXVID] What's that for a format 0x%x.\n" + +// libvo/vo_tga.c + +#define MSGTR_LIBVO_TGA_UnknownSubdevice "[VO_TGA] Unknown subdevice: %s.\n" + +// libvo/vo_vesa.c + +#define MSGTR_LIBVO_VESA_FatalErrorOccurred "[VO_VESA] Fatal error occurred! Can't continue.\n" +#define MSGTR_LIBVO_VESA_UnkownSubdevice "[VO_VESA] Unknown subdevice: '%s'.\n" +#define MSGTR_LIBVO_VESA_YourHaveTooSmallSizeOfVideoMemory "[VO_VESA] Your have too small size of video memory for this mode:\n[VO_VESA] Requires: %08lX exists: %08lX.\n" +#define MSGTR_LIBVO_VESA_YouHaveToSpecifyTheCapabilitiesOfTheMonitor "[VO_VESA] You have to specify the capabilities of the monitor. Not changing refresh rate.\n" +#define MSGTR_LIBVO_VESA_UnableToFitTheMode "[VO_VESA] Unable to fit the mode into monitor's limitation. Not changing refresh rate.\n" +#define MSGTR_LIBVO_VESA_DetectedInternalFatalError "[VO_VESA] Detected internal fatal error: init is called before preinit.\n" +#define MSGTR_LIBVO_VESA_SwitchFlipIsNotSupported "[VO_VESA] Switch -flip is not supported.\n" +#define MSGTR_LIBVO_VESA_PossibleReasonNoVbe2BiosFound "[VO_VESA] Possible reason: No VBE2 BIOS found.\n" +#define MSGTR_LIBVO_VESA_FoundVesaVbeBiosVersion "[VO_VESA] Found VESA VBE BIOS Version %x.%x Revision: %x.\n" +#define MSGTR_LIBVO_VESA_VideoMemory "[VO_VESA] Video memory: %u Kb.\n" +#define MSGTR_LIBVO_VESA_Capabilites "[VO_VESA] VESA Capabilities: %s %s %s %s %s.\n" +#define MSGTR_LIBVO_VESA_BelowWillBePrintedOemInfo "[VO_VESA] !!! Below will be printed OEM info. !!!\n" +#define MSGTR_LIBVO_VESA_YouShouldSee5OemRelatedLines "[VO_VESA] You should see 5 OEM related lines below; else, you've broken vm86.\n" +#define MSGTR_LIBVO_VESA_OemInfo "[VO_VESA] OEM info: %s.\n" +#define MSGTR_LIBVO_VESA_OemRevision "[VO_VESA] OEM Revision: %x.\n" +#define MSGTR_LIBVO_VESA_OemVendor "[VO_VESA] OEM vendor: %s.\n" +#define MSGTR_LIBVO_VESA_OemProductName "[VO_VESA] OEM Product Name: %s.\n" +#define MSGTR_LIBVO_VESA_OemProductRev "[VO_VESA] OEM Product Rev: %s.\n" +#define MSGTR_LIBVO_VESA_Hint "[VO_VESA] Hint: To get workable TV-Out you should have plugged tv-connector in.\n"\ +"[VO_VESA] before booting PC since VESA BIOS initializes itself only during POST.\n" +#define MSGTR_LIBVO_VESA_UsingVesaMode "[VO_VESA] Using VESA mode (%u) = %x [%ux%u@%u]\n" +#define MSGTR_LIBVO_VESA_CantInitializeSwscaler "[VO_VESA] Can't initialize SwScaler.\n" +#define MSGTR_LIBVO_VESA_CantUseDga "[VO_VESA] Can't use DGA. Force bank switching mode. :(\n" +#define MSGTR_LIBVO_VESA_UsingDga "[VO_VESA] Using DGA (physical resources: %08lXh, %08lXh)" +#define MSGTR_LIBVO_VESA_CantUseDoubleBuffering "[VO_VESA] Can't use double buffering: not enough video memory.\n" +#define MSGTR_LIBVO_VESA_CantFindNeitherDga "[VO_VESA] Can find neither DGA nor relocatable window's frame.\n" +#define MSGTR_LIBVO_VESA_YouveForcedDga "[VO_VESA] You've forced DGA. Exiting\n" +#define MSGTR_LIBVO_VESA_CantFindValidWindowAddress "[VO_VESA] Can't find valid window address.\n" +#define MSGTR_LIBVO_VESA_UsingBankSwitchingMode "[VO_VESA] Using bank switching mode (physical resources: %08lXh, %08lXh).\n" +#define MSGTR_LIBVO_VESA_CantAllocateTemporaryBuffer "[VO_VESA] Can't allocate temporary buffer.\n" +#define MSGTR_LIBVO_VESA_SorryUnsupportedMode "[VO_VESA] Sorry, unsupported mode -- try -x 640 -zoom.\n" +#define MSGTR_LIBVO_VESA_OhYouReallyHavePictureOnTv "[VO_VESA] Oh you really have picture on TV!\n" +#define MSGTR_LIBVO_VESA_CantInitialozeLinuxVideoOverlay "[VO_VESA] Can't initialize Linux Video Overlay.\n" +#define MSGTR_LIBVO_VESA_UsingVideoOverlay "[VO_VESA] Using video overlay: %s.\n" +#define MSGTR_LIBVO_VESA_CantInitializeVidixDriver "[VO_VESA] Can't initialize VIDIX driver.\n" +#define MSGTR_LIBVO_VESA_UsingVidix "[VO_VESA] Using VIDIX.\n" +#define MSGTR_LIBVO_VESA_CantFindModeFor "[VO_VESA] Can't find mode for: %ux%u@%u.\n" +#define MSGTR_LIBVO_VESA_InitializationComplete "[VO_VESA] VESA initialization complete.\n" + +// libvo/vo_x11.c + +#define MSGTR_LIBVO_X11_DrawFrameCalled "[VO_X11] draw_frame() called!!!!!!\n" + +// libvo/vo_xv.c + +#define MSGTR_LIBVO_XV_DrawFrameCalled "[VO_XV] draw_frame() called!!!!!!\n"
--- a/libvo/aspect.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/aspect.c Mon Apr 24 04:23:53 2006 +0000 @@ -1,9 +1,9 @@ /* Stuff for correct aspect scaling. */ #include "aspect.h" #include "geometry.h" -#ifndef ASPECT_TEST +//#ifndef ASPECT_TEST #include "mp_msg.h" -#endif +//#endif //#define ASPECT_DEBUG @@ -105,7 +105,7 @@ #ifndef ASPECT_TEST mp_msg(MSGT_VO,MSGL_WARN,"aspect: Warning: no suitable new res found!\n"); #else - printf("error: no new size found that fits into res!\n"); + mp_msg(MSGT_VO,MSGL_WARN,"error: no new size found that fits into res!\n"); #endif } }
--- a/libvo/mga_common.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/mga_common.c Mon Apr 24 04:23:53 2006 +0000 @@ -5,6 +5,7 @@ #include "postproc/rgb2rgb.h" #include "libmpcodecs/vf_scale.h" #include "mp_msg.h" +#include "help_mp.h" // mga_vid drawing functions static void set_window( void ); /* forward declaration to kill warnings */ @@ -138,7 +139,7 @@ static int draw_frame(uint8_t *src[]) { - printf("!!! mga::draw_frame() called !!!\n"); + mp_msg(MSGT_VO,MSGL_WARN,"!!! mga::draw_frame() called !!!\n"); return 0; } @@ -226,7 +227,7 @@ mga_vid_config.x_org=(vo_screenwidth-w)/2; mga_vid_config.y_org=(vo_screenheight-h)/2; if ( ioctl( f,MGA_VID_CONFIG,&mga_vid_config ) ) - printf( "Error in mga_vid_config ioctl (wrong mga_vid.o version?)" ); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_ErrorInConfigIoctl ); } static int control(uint32_t request, void *data, ...) @@ -248,7 +249,7 @@ if (ioctl(f,MGA_VID_GET_LUMA,&prev)) { perror("Error in mga_vid_config ioctl()"); - printf("Could not get luma values from the kernel module!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_CouldNotGetLumaValuesFromTheKernelModule); return VO_FALSE; } @@ -269,7 +270,7 @@ if (ioctl(f,MGA_VID_SET_LUMA,luma)) { perror("Error in mga_vid_config ioctl()"); - printf("Could not set luma values in the kernel module!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_CouldNotSetLumaValuesFromTheKernelModule); return VO_FALSE; } @@ -287,7 +288,7 @@ if (ioctl(f,MGA_VID_GET_LUMA,&luma)) { perror("Error in mga_vid_config ioctl()"); - printf("Could not get luma values from the kernel module!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_CouldNotGetLumaValuesFromTheKernelModule); return VO_FALSE; } @@ -310,7 +311,7 @@ if (vo_screenwidth && vo_screenheight) mga_fullscreen(); else - printf("Screen width/height unknown!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_ScreenWidthHeightUnknown); return VO_TRUE; case VOCTRL_GET_PANSCAN: if ( !vo_fs ) return VO_FALSE; @@ -367,7 +368,7 @@ mga_vid_config.frame_size = ((width + 31) & ~31) * height * 2; mga_vid_config.format=MGA_VID_FORMAT_UYVY; break; default: - printf("mga: invalid output format %0X\n",format); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_InvalidOutputFormat,format); return (-1); } @@ -385,11 +386,11 @@ if (ioctl(f,MGA_VID_CONFIG,&mga_vid_config)) { perror("Error in mga_vid_config ioctl()"); - printf("Your mga_vid driver version is incompatible with this MPlayer version!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_IncompatibleDriverVersion); return -1; } - printf("[mga] Using %d buffers.\n",mga_vid_config.num_frames); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_MGA_UsingBuffers,mga_vid_config.num_frames); frames[0] = (char*)mmap(0,mga_vid_config.frame_size*mga_vid_config.num_frames,PROT_WRITE,MAP_SHARED,f,0); frames[1] = frames[0] + 1*mga_vid_config.frame_size; @@ -427,7 +428,7 @@ if(f == -1) { perror("open"); - printf("vo_mga: Couldn't open %s\n",devname); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_MGA_CouldntOpen,devname); return(-1); }
--- a/libvo/vesa_lvo.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vesa_lvo.c Mon Apr 24 04:23:53 2006 +0000 @@ -21,6 +21,7 @@ #include "config.h" #include "mp_msg.h" +#include "help_mp.h" #include "vesa_lvo.h" #include "img_format.h" @@ -51,15 +52,14 @@ int vlvo_preinit(const char *drvname) { - printf("vesa_lvo: This branch is no longer supported.\n" - "vesa_lvo: Please use -vo vesa:vidix instead\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_ThisBranchIsNoLongerSupported); return -1; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_preinit(%s) was called\n",drvname); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: vlvo_preinit(%s) was called\n",drvname);} lvo_handler = open(drvname,O_RDWR); if(lvo_handler == -1) { - printf("vesa_lvo: Couldn't open '%s'\n",drvname); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_CouldntOpen,drvname); return -1; } /* we are able to tune up this stuff depend on fourcc format */ @@ -76,11 +76,10 @@ unsigned dst_height,unsigned format,unsigned dest_bpp) { size_t i,awidth; - printf("vesa_lvo: This branch is no longer supported.\n" - "vesa_lvo: Please use -vo vesa:vidix instead\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_ThisBranchIsNoLongerSupported); return -1; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_init() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: vlvo_init() was called\n");} image_width = src_width; image_height = src_height; mga_vid_config.version=MGA_VID_VERSION; @@ -116,7 +115,7 @@ mga_vid_config.frame_size = awidth*src_height*4; break; default: - printf("vesa_lvo: invalid output format %s(%0X)\n",vo_format_name(format),format); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_InvalidOutputFormat,vo_format_name(format),format); return -1; } mga_vid_config.colkey_on=0; @@ -130,7 +129,7 @@ if (ioctl(lvo_handler,MGA_VID_CONFIG,&mga_vid_config)) { perror("vesa_lvo: Error in mga_vid_config ioctl()"); - printf("vesa_lvo: Your fb_vid driver version is incompatible with this MPlayer version!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_IncompatibleDriverVersion); return -1; } ioctl(lvo_handler,MGA_VID_ON,0); @@ -149,7 +148,7 @@ void vlvo_term( void ) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_term() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: vlvo_term() was called\n");} ioctl( lvo_handler,MGA_VID_OFF,0 ); munmap(frames[0],mga_vid_config.frame_size*mga_vid_config.num_frames); if(lvo_handler != -1) close(lvo_handler); @@ -198,7 +197,7 @@ uint32_t vlvo_draw_slice(uint8_t *image[], int stride[], int w,int h,int x,int y) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_draw_slice() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: vlvo_draw_slice() was called\n");} if(src_format == IMGFMT_YV12 || src_format == IMGFMT_I420 || src_format == IMGFMT_IYUV) vlvo_draw_slice_420(image,stride,w,h,x,y); else @@ -218,14 +217,14 @@ /* Note it's very strange but sometime for YUY2 draw_frame is called */ memcpy(lvo_mem,image[0],mga_vid_config.frame_size); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_draw_frame() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: vlvo_flip_page() was called\n");} return 0; } void vlvo_flip_page(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_flip_page() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: vlvo_draw_osd() was called\n");} if(vo_doublebuffering) { ioctl(lvo_handler,MGA_VID_FSEL,&next_frame); @@ -284,7 +283,7 @@ void vlvo_draw_osd(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: vlvo_draw_osd() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2,"vesa_lvo: vlvo_draw_osd() was called\n"); } /* TODO: hw support */ #if 0 /* disable this stuff until new fbvid.h interface will be implemented @@ -297,7 +296,7 @@ uint32_t vlvo_query_info(uint32_t format) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vesa_lvo: query_format was called: %x (%s)\n",format,vo_format_name(format)); } + mp_msg(MSGT_VO,MSGL_DBG2, "vesa_lvo: query_format was called: %x (%s)\n",format,vo_format_name(format)); } return VFCAP_CSP_SUPPORTED; }
--- a/libvo/video_out.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/video_out.c Mon Apr 24 04:23:53 2006 +0000 @@ -267,9 +267,9 @@ mp_msg(MSGT_GLOBAL, MSGL_INFO, "ID_VIDEO_OUTPUTS\n"); while (video_out_drivers[i]) { const vo_info_t *info = video_out_drivers[i++]->info; - printf("\t%s\t%s\n", info->short_name, info->name); + mp_msg(MSGT_GLOBAL, MSGL_INFO,"\t%s\t%s\n", info->short_name, info->name); } - printf("\n"); + mp_msg(MSGT_GLOBAL, MSGL_INFO,"\n"); } vo_functions_t* init_best_video_out(char** vo_list){ @@ -354,7 +354,7 @@ if (*s == ',') goto out_err; if (!(r = (range_t *) realloc(r, sizeof(*r) * (i + 2)))) { - printf("can't realloc 'r'\n"); + mp_msg(MSGT_GLOBAL, MSGL_WARN,"can't realloc 'r'\n"); return NULL; } tmp_min = strtod(s, &endptr);
--- a/libvo/vo_3dfx.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_3dfx.c Mon Apr 24 04:23:53 2006 +0000 @@ -27,6 +27,8 @@ #include <string.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" @@ -167,12 +169,12 @@ bpp = attribs.depth; if (bpp != 16) { - printf("Only 16bpp supported!"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_Only16BppSupported); exit(-1); } XMatchVisualInfo(display,screen,bpp,TrueColor,&vinfo); - printf("visual id is %lx\n",vinfo.visualid); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_3DFX_VisualIdIs,vinfo.visualid); theCmap = XCreateColormap(display, RootWindow(display,screen), vinfo.visual, AllocNone); @@ -333,7 +335,7 @@ // Open driver device if ( fd == -1 ) { - printf("Device not opened /dev/3dfx\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_UnableToOpenDevice); return -1; } @@ -352,7 +354,7 @@ data.device = 0; if ((retval = ioctl(fd,_IOC(_IOC_READ,'3',3,0),&data)) < 0) { - printf("Error: %d\n",retval); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_Error,retval); return -1; } @@ -363,7 +365,7 @@ data.device = 0; if ((retval = ioctl(fd,_IOC(_IOC_READ,'3',3,0),&data)) < 0) { - printf("Error: %d\n",retval); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_Error,retval); return -1; } @@ -372,7 +374,7 @@ memBase1 = mmap(0,3*page_space,PROT_READ | PROT_WRITE,MAP_SHARED,fd,baseAddr1); if (memBase0 == (uint32_t *) 0xFFFFFFFF || memBase1 == (uint32_t *) 0xFFFFFFFF) { - printf("Couldn't map 3dfx memory areas: %p,%p,%d\n", + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_CouldntMapMemoryArea, memBase0,memBase1,errno); } @@ -411,7 +413,7 @@ atexit(restore); - printf("(display) 3dfx initialized %p\n",memBase1); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_3DFX_DisplayInitialized,memBase1); return 0; } @@ -483,13 +485,13 @@ { if ( (fd = open("/dev/3dfx",O_RDWR) ) == -1) { - printf("Couldn't open /dev/3dfx\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_UnableToOpenDevice); return -1; } if(arg) { - printf("vo_3dfx: Unknown subdevice: %s\n",arg); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_3DFX_UnknownSubdevice,arg); return ENOSYS; } return 0;
--- a/libvo/vo_dxr3.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_dxr3.c Mon Apr 24 04:23:53 2006 +0000 @@ -130,6 +130,8 @@ #include <math.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #ifdef HAVE_MALLOC_H #include <malloc.h> #endif @@ -281,7 +283,7 @@ return VO_TRUE; case VOCTRL_SET_SPU_PALETTE: if (ioctl(fd_spu, EM8300_IOCTL_SPU_SETPALETTE, data) < 0) { - printf("VO: [dxr3] Unable to load new SPU palette!\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_UnableToLoadNewSPUPalette); return VO_ERROR; } return VO_TRUE; @@ -311,7 +313,7 @@ if (dxr3_prebuf) { ioval = EM8300_PLAYMODE_PLAY; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { - printf("VO: [dxr3] Unable to set playmode!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToSetPlaymode); } } return VO_TRUE; @@ -319,7 +321,7 @@ if (dxr3_prebuf) { ioval = EM8300_PLAYMODE_PAUSED; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { - printf("VO: [dxr3] Unable to set playmode!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToSetPlaymode); } } return VO_TRUE; @@ -425,7 +427,7 @@ /* up in a lockup */ ioval = EM8300_SPUMODE_ON; if (ioctl(fd_control, EM8300_IOCTL_SET_SPUMODE, &ioval) < 0) { - printf("VO: [dxr3] Unable to set subpicture mode!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToSetSubpictureMode); uninit(); return -1; } @@ -433,7 +435,7 @@ /* Set the playmode to play (just in case another app has set it to something else) */ ioval = EM8300_PLAYMODE_PLAY; if (ioctl(fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval) < 0) { - printf("VO: [dxr3] Unable to set playmode!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToSetPlaymode); } /* Start em8300 prebuffering and sync engine */ @@ -465,7 +467,7 @@ monitor_aspect = (float) width / (float) height; if (ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &old_vmode) < 0) { - printf("VO: [dxr3] Unable to get TV norm!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToGetTVNorm); old_vmode = -1; } @@ -484,8 +486,8 @@ ioval = EM8300_VIDEOMODE_PAL; } - printf("VO: [dxr3] Auto-selected TV norm by frame rate: "); - ioval == EM8300_VIDEOMODE_PAL60 ? printf("PAL-60") : printf("PAL"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_AutoSelectedTVNormByFrameRate); + ioval == EM8300_VIDEOMODE_PAL60 ? mp_msg(MSGT_VO,MSGL_INFO, "PAL-60") : mp_msg(MSGT_VO,MSGL_INFO, "PAL"); printf(".\n"); } else { if (vo_fps > 28) { @@ -494,14 +496,14 @@ ioval = EM8300_VIDEOMODE_PAL; } - printf("VO: [dxr3] Auto-selected TV norm by frame rate: "); - ioval == EM8300_VIDEOMODE_NTSC ? printf("NTSC") : printf("PAL"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_AutoSelectedTVNormByFrameRate); + ioval == EM8300_VIDEOMODE_NTSC ? mp_msg(MSGT_VO,MSGL_INFO, "NTSC") : mp_msg(MSGT_VO,MSGL_INFO, "PAL"); printf(".\n"); } if (old_vmode != ioval) { if (ioctl(fd_control, EM8300_IOCTL_SET_VIDEOMODE, &ioval) < 0) { - printf("VO: [dxr3] Unable to set TV norm!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToSetTVNorm); } } } @@ -512,10 +514,10 @@ aspect_save_prescale(d_width, d_height); ioctl(fd_control, EM8300_IOCTL_GET_VIDEOMODE, &ioval); if (ioval == EM8300_VIDEOMODE_NTSC) { - printf("VO: [dxr3] Setting up for NTSC.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_SettingUpForNTSC); aspect_save_screenres(352, 240); } else { - printf("VO: [dxr3] Setting up for PAL/SECAM.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_SettingUpForPALSECAM); aspect_save_screenres(352, 288); } aspect(&s_width, &s_height, A_ZOOM); @@ -528,10 +530,10 @@ tmp2 = abs(d_height - (int) (d_width / 2.35)); if (tmp1 < tmp2) { ioval = EM8300_ASPECTRATIO_4_3; - printf("VO: [dxr3] Setting aspect ratio to 4:3.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_SettingAspectRatioTo43); } else { ioval = EM8300_ASPECTRATIO_16_9; - printf("VO: [dxr3] Setting aspect ratio to 16:9.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_SettingAspectRatioTo169); } ioctl(fd_control, EM8300_IOCTL_SET_ASPECTRATIO, &ioval); @@ -550,20 +552,20 @@ osdpicbuf = calloc( 1,s_width * s_height); if (osdpicbuf == NULL) { - printf("VO: [dxr3] Out of memory.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_OutOfMemory); return -1; } spued = (encodedata *) malloc(sizeof(encodedata)); if (spued == NULL) { free( osdpicbuf ); - printf("VO: [dxr3] Out of memory.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_OutOfMemory); return -1; } spubuf = (encodedata *) malloc(sizeof(encodedata)); if (spubuf == NULL) { free( osdpicbuf ); free( spued ); - printf("VO: [dxr3] Out of memory.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_OutOfMemory); return -1; } osd_w = s_width; @@ -651,13 +653,13 @@ ((key_color.blue >> (16 - blue_prec)) << blue_shift)); key_color.flags = DoRed | DoGreen | DoBlue; if (!XAllocColor(mDisplay, cmap, &key_color)) { - printf("VO: [dxr3] Unable to allocate keycolor!\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_UnableToAllocateKeycolor); return -1; } acq_color = ((key_color.red / 256) << 16) | ((key_color.green / 256) << 8) | key_color.blue; if (key_color.pixel != KEY_COLOR) { - printf("VO: [dxr3] Unable to allocate exact keycolor, using closest match (0x%lx).\n", key_color.pixel); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_UnableToAllocateExactKeycolor, key_color.pixel); } /* Set keycolor and activate overlay */ @@ -814,7 +816,7 @@ static void uninit(void) { - printf("VO: [dxr3] Uninitializing.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_Uninitializing); #ifdef HAVE_X11 if (dxr3_overlay) { overlay_set_mode(overlay_data, EM8300_OVERLAY_MODE_OFF); @@ -832,7 +834,7 @@ #endif if (old_vmode != -1) { if (ioctl(fd_control, EM8300_IOCTL_SET_VIDEOMODE, &old_vmode) < 0) { - printf("VO: [dxr3] Failed restoring TV norm!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedRestoringTVNorm); } } @@ -867,49 +869,49 @@ /* Parse commandline */ while (arg) { if (!strncmp("prebuf", arg, 6) && !dxr3_prebuf) { - printf("VO: [dxr3] Enabling prebuffering.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_EnablingPrebuffering); dxr3_prebuf = 1; } else if (!strncmp("sync", arg, 4) && !dxr3_newsync) { - printf("VO: [dxr3] Using new sync engine.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_UsingNewSyncEngine); dxr3_newsync = 1; } else if (!strncmp("overlay", arg, 7) && !dxr3_overlay) { #ifdef HAVE_X11 - printf("VO: [dxr3] Using overlay.\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_UsingOverlay); dxr3_overlay = 1; #else - printf("VO: [dxr3] Error: You need to compile mplayer with x11 libraries and headers installed to use overlay.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_ErrorYouNeedToCompileMplayerWithX11); #endif } else if (!strncmp("norm=", arg, 5)) { arg += 5; // dxr3_norm is 0 (-> don't change norm) by default // but maybe someone changes this in the future - printf("VO: [dxr3] Will set TV norm to: "); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_WillSetTVNormTo); if (*arg == '5') { dxr3_norm = 5; - printf("NTSC"); + mp_msg(MSGT_VO,MSGL_INFO, "NTSC"); } else if (*arg == '4') { dxr3_norm = 4; - printf("PAL-60"); + mp_msg(MSGT_VO,MSGL_INFO, "PAL-60"); } else if (*arg == '3') { dxr3_norm = 3; - printf("PAL"); + mp_msg(MSGT_VO,MSGL_INFO, "PAL"); } else if (*arg == '2') { dxr3_norm = 2; - printf("Auto-adjust to movie frame rate (PAL/PAL-60)"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_AutoAdjustToMovieFrameRatePALPAL60); } else if (*arg == '1') { dxr3_norm = 1; - printf("Auto-adjust to movie frame rate (PAL/NTSC)"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_AutoAdjustToMovieFrameRatePALNTSC); } else if (*arg == '0') { dxr3_norm = 0; - printf("Use current norm"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_UseCurrentNorm); } else { dxr3_norm = 0; - printf("Unknown norm supplied. Use current norm"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_UseUnknownNormSuppliedCurrentNorm); } - printf(".\n"); + mp_msg(MSGT_VO,MSGL_INFO, ".\n"); } else if (arg[0] == '0' || arg[0] == '1' || arg[0] == '2' || arg[0] == '3') { dxr3_device_num = arg[0]; } @@ -926,15 +928,15 @@ fd_control = open(devname, fdflags); if (fd_control < 1) { /* Fall back to old naming scheme */ - printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300 instead.\n", devname); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_ErrorOpeningForWritingTrying, devname); sprintf(devname, "/dev/em8300"); fd_control = open(devname, fdflags); if (fd_control < 1) { - printf("VO: [dxr3] Error opening /dev/em8300 for writing as well!\nBailing.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_ErrorOpeningForWritingAsWell); return -1; } } else { - printf("VO: [dxr3] Opened %s.\n", devname); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_Opened, devname); } /* Open the video interface */ @@ -942,16 +944,16 @@ fd_video = open(devname, fdflags); if (fd_video < 0) { /* Fall back to old naming scheme */ - printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_mv instead.\n", devname); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_ErrorOpeningForWritingTryingMV, devname); sprintf(devname, "/dev/em8300_mv"); fd_video = open(devname, fdflags); if (fd_video < 0) { - printf("VO: [dxr3] Error opening /dev/em8300_mv for writing as well!\nBailing.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_ErrorOpeningForWritingAsWellMV); uninit(); return -1; } } else { - printf("VO: [dxr3] Opened %s.\n", devname); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_Opened, devname); } strcpy(fdv_name, devname); @@ -960,16 +962,16 @@ fd_spu = open(devname, fdflags); if (fd_spu < 0) { /* Fall back to old naming scheme */ - printf("VO: [dxr3] Error opening %s for writing, trying /dev/em8300_sp instead.\n", devname); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_ErrorOpeningForWritingTryingSP, devname); sprintf(devname, "/dev/em8300_sp"); fd_spu = open(devname, fdflags); if (fd_spu < 0) { - printf("VO: [dxr3] Error opening /dev/em8300_sp for writing as well!\nBailing.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_ErrorOpeningForWritingAsWellSP); uninit(); return -1; } } else { - printf("VO: [dxr3] Opened %s.\n", devname); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_Opened, devname); } strcpy(fds_name, devname); @@ -986,7 +988,7 @@ dpy = XOpenDisplay(NULL); if (!dpy) { - printf("VO: [dxr3] Unable to open display during overlay hack setup!\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_UnableToOpenDisplayDuringHackSetup); return -1; } XGetWindowAttributes(dpy, RootWindow(dpy, DefaultScreen(dpy)), &attribs); @@ -1006,7 +1008,7 @@ if (!use_gui) { #endif if (!vo_init()) { - printf("VO: [dxr3] Unable to init x11!\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_UnableToInitX11); return -1; } #ifdef HAVE_NEW_GUI @@ -1045,7 +1047,7 @@ attr.value = value; if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_SET_ATTRIBUTE, &attr)==-1) { - printf("VO: [dxr3] Failed setting overlay attribute.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedSettingOverlayAttribute); return -1; } @@ -1251,7 +1253,7 @@ if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_SETSCREEN, &scr)==-1) { - printf("VO: [dxr3] Failed setting overlay screen!\nExiting.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedSettingOverlayScreen); return -1; } return 0; @@ -1260,7 +1262,7 @@ static int overlay_set_mode(overlay_t *o, int mode) { if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_SETMODE, &mode)==-1) { - printf("VO: [dxr3] Failed enabling overlay!\nExiting.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedEnablingOverlay); return -1; } return 0; @@ -1276,7 +1278,7 @@ if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_SETWINDOW, &win)==-1) { - printf("VO: [dxr3] Failed resizing overlay window!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedResizingOverlayWindow); return -1; } return 0; @@ -1291,7 +1293,7 @@ if (ioctl(o->dev, EM8300_IOCTL_GETBCS, &bcs)==-1) { - printf("VO: [dxr3] Failed setting overlay bcs!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedSettingOverlayBcs); return -1; } return 0; @@ -1379,11 +1381,11 @@ cal.cal_mode = EM8300_OVERLAY_CALMODE_YOFFSET; if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_CALIBRATE, &cal)) { - printf("VO: [dxr3] Failed getting overlay Y-offset values!\nExiting.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedGettingOverlayYOffsetValues); return -1; } o->yoffset = cal.result; - printf("Yoffset: %d\n",cal.result); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_YOffset,cal.result); /* Calibrate X-offset */ @@ -1392,11 +1394,11 @@ cal.cal_mode = EM8300_OVERLAY_CALMODE_XOFFSET; if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_CALIBRATE, &cal)) { - printf("VO: [dxr3] Failed getting overlay X-offset values!\nExiting.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedGettingOverlayXOffsetValues); return -1; } o->xoffset = cal.result; - printf("Xoffset: %d\n",cal.result); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_XOffset,cal.result); /* Calibrate X scale correction */ @@ -1405,10 +1407,10 @@ cal.cal_mode = EM8300_OVERLAY_CALMODE_XCORRECTION; if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_CALIBRATE, &cal)) { - printf("VO: [dxr3] Failed getting overlay X-scale correction!\nExiting.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedGettingOverlayYScaleCorrection); return -1; } - printf("Xcorrection: %d\n",cal.result); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_DXR3_XCorrection,cal.result); o->xcorr = cal.result; win.xpos = 10; @@ -1416,7 +1418,7 @@ win.width = o->xres-20; win.height = o->yres-20; if (ioctl(o->dev, EM8300_IOCTL_OVERLAY_SETWINDOW, &win)==-1) { - printf("VO: [dxr3] Failed resizing overlay window!\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_DXR3_FailedResizingOverlayWindow); exit(1); } @@ -1479,7 +1481,7 @@ static int overlay_signalmode(overlay_t *o, int mode) { if(ioctl(o->dev, EM8300_IOCTL_OVERLAY_SIGNALMODE, &mode) ==-1) { - printf("VO: [dxr3] Failed set signal mix!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_DXR3_FailedSetSignalMix); return -1; } return 0;
--- a/libvo/vo_mga.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_mga.c Mon Apr 24 04:23:53 2006 +0000 @@ -7,6 +7,8 @@ #include <string.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" @@ -67,7 +69,7 @@ aspect(&d_width,&d_height,A_NOZOOM); vo_fs = VO_FALSE; } - printf("vo_mga aspect(): resized to %dx%d\n",d_width,d_height); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_MGA_AspectResized,d_width,d_height); } vo_dwidth=d_width; vo_dheight=d_height; @@ -85,7 +87,7 @@ static void uninit(void) { - printf("vo: uninit!\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_MGA_Uninit); mga_uninit(); }
--- a/libvo/vo_null.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_null.c Mon Apr 24 04:23:53 2006 +0000 @@ -26,6 +26,8 @@ #include <string.h> #include <errno.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" @@ -91,7 +93,7 @@ { if(arg) { - printf("vo_null: Unknown subdevice: %s\n",arg); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_NULL_UnknownSubdevice,arg); return ENOSYS; } return 0;
--- a/libvo/vo_png.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_png.c Mon Apr 24 04:23:53 2006 +0000 @@ -16,6 +16,8 @@ #include "mp_msg.h" #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" #include "subopt-helper.h" @@ -45,13 +47,13 @@ { if(z_compression == 0) { - printf("PNG Warning: compression level set to 0, compression disabled!\n"); - printf("PNG Info: Use -vo png:z=<n> to set compression level from 0 to 9.\n"); - printf("PNG Info: (0 = no compression, 1 = fastest, lowest - 9 best, slowest compression)\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_PNG_Warning1); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_PNG_Warning2); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_PNG_Warning3); } if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Compression level %i\n", z_compression); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Compression level %i\n", z_compression); } return 0; } @@ -72,14 +74,14 @@ if (!png.png_ptr) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Failed to init png pointer\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Failed to init png pointer\n"); } png.status = ERROR; return png; } if (!png.info_ptr) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Failed to init png infopointer\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Failed to init png infopointer\n"); } png_destroy_write_struct(&png.png_ptr, (png_infopp)NULL); png.status = ERROR; @@ -88,7 +90,7 @@ if (setjmp(png.png_ptr->jmpbuf)) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Internal error!\n");} + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Internal error!\n"); } png_destroy_write_struct(&png.png_ptr, &png.info_ptr); fclose(png.fp); png.status = ERROR; @@ -97,13 +99,13 @@ png.fp = fopen (fname, "wb"); if (png.fp == NULL) { - printf("\nPNG Error opening %s for writing!\n", strerror(errno)); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_PNG_ErrorOpeningForWriting, strerror(errno)); png.status = ERROR; return png; } if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Init IO\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Init IO\n"); } png_init_io(png.png_ptr, png.fp); /* set the zlib compression level */ @@ -118,12 +120,12 @@ PNG_COMPRESSION_TYPE_DEFAULT, PNG_FILTER_TYPE_DEFAULT); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Write Info\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Write Info\n"); } png_write_info(png.png_ptr, png.info_ptr); if(swapped) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Set BGR Conversion\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Set BGR Conversion\n"); } png_set_bgr(png.png_ptr); } @@ -134,11 +136,11 @@ static uint8_t destroy_png(struct pngdata png) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Write End\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Write End\n"); } png_write_end(png.png_ptr, png.info_ptr); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Destroy Write Struct\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Destroy Write Struct\n"); } png_destroy_write_struct(&png.png_ptr, &png.info_ptr); fclose (png.fp); @@ -160,12 +162,12 @@ png = create_png(buf, mpi->w, mpi->h, mpi->flags&MP_IMGFLAG_SWAPPED); if(png.status){ - printf("PNG Error in create_png\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_PNG_ErrorInCreatePng); return 1; } if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Creating Row Pointers\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Creating Row Pointers\n"); } for ( k = 0; k < mpi->h; k++ ) row_pointers[k] = mpi->planes[0]+mpi->stride[0]*k; @@ -173,7 +175,7 @@ //png_set_flush(png.png_ptr, nrows); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("PNG Writing Image Data\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "PNG Writing Image Data\n"); } png_write_image(png.png_ptr, row_pointers); destroy_png(png);
--- a/libvo/vo_sdl.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_sdl.c Mon Apr 24 04:23:53 2006 +0000 @@ -107,6 +107,8 @@ #include "mp_msg.h" #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" @@ -141,7 +143,7 @@ #ifdef SDL_ENABLE_LOCKS #define SDL_OVR_LOCK(x) if (SDL_LockYUVOverlay (priv->overlay)) { \ if( mp_msg_test(MSGT_VO,MSGL_V) ) { \ - printf("SDL: Couldn't lock YUV overlay\n");} \ + mp_msg(MSGT_VO,MSGL_V, "SDL: Couldn't lock YUV overlay\n"); } \ return x; \ } #define SDL_OVR_UNLOCK SDL_UnlockYUVOverlay (priv->overlay); @@ -149,7 +151,7 @@ #define SDL_SRF_LOCK(srf, x) if(SDL_MUSTLOCK(srf)) { \ if(SDL_LockSurface (srf)) { \ if( mp_msg_test(MSGT_VO,MSGL_V) ) { \ - printf("SDL: Couldn't lock RGB surface\n"); } \ + mp_msg(MSGT_VO,MSGL_V, "SDL: Couldn't lock RGB surface\n"); } \ return x; \ } \ } @@ -424,7 +426,7 @@ /* other default values */ #ifdef SDL_NOHWSURFACE if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: using software-surface\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: using software-surface\n"); } priv->sdlflags = SDL_SWSURFACE|SDL_RESIZABLE|SDL_ANYFORMAT; priv->sdlfullflags = SDL_SWSURFACE|SDL_FULLSCREEN|SDL_ANYFORMAT; // XXX:FIXME: ASYNCBLIT should be enabled for SMP systems @@ -437,7 +439,7 @@ } else { */ if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: using hardware-surface\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: using hardware-surface\n"); } priv->sdlflags = SDL_HWSURFACE|SDL_RESIZABLE/*|SDL_ANYFORMAT*/; priv->sdlfullflags = SDL_HWSURFACE|SDL_FULLSCREEN/*|SDL_ANYFORMAT*/; // XXX:FIXME: ASYNCBLIT should be enabled for SMP systems @@ -473,7 +475,7 @@ */ priv->sdlflags &= ~SDL_HWSURFACE; if ((!SDL_ListModes (vidInfo->vfmt, priv->sdlflags)) && (!priv->fullmodes)) { - printf("SDL: Couldn't get any acceptable SDL Mode for output.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SDL_CouldntGetAnyAcceptableSDLModeForOutput); return -1; } } @@ -488,7 +490,7 @@ if (priv->mode == YUV && priv->bpp < 16) { if( mp_msg_test(MSGT_VO,MSGL_V) ) - printf("SDL: Your SDL display target wants to be at a color " + mp_msg(MSGT_VO,MSGL_V, "SDL: Your SDL display target wants to be at a color " "depth of (%d), but we need it to be at least 16 " "bits, so we need to emulate 16-bit color. This is " "going to slow things down; you might want to " @@ -567,7 +569,7 @@ static SDL_Rect aspect(int srcw, int srch, int dstw, int dsth) { SDL_Rect newres; if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL Aspect: src: %ix%i dst: %ix%i\n", srcw, srch, dstw, dsth); } + mp_msg(MSGT_VO,MSGL_V, "SDL Aspect-Destinationres: %ix%i (x: %i, y: %i)\n", newres.w, newres.h, newres.x, newres.y); } newres.h = ((float)dstw / (float)srcw * (float)srch) * ((float)dsth/((float)dstw/(MONITOR_ASPECT))); if(newres.h > dsth) { newres.w = ((float)dsth / (float)newres.h) * dstw; @@ -582,7 +584,7 @@ } if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL Aspect-Destinationres: %ix%i (x: %i, y: %i)\n", newres.w, newres.h, newres.x, newres.y); } + mp_msg(MSGT_VO,MSGL_V, "SDL Mode: %d: %d x %d\n", i, priv->fullmodes[i]->w, priv->fullmodes[i]->h); } return newres; } @@ -658,7 +660,7 @@ setup_surfaces(); } else - printf("set_video_mode: SDL_SetVideoMode failed: %s\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_WARN, "set_video_mode: SDL_SetVideoMode failed: %s\n", SDL_GetError()); } static void set_fullmode (int mode) { @@ -684,7 +686,7 @@ int i,j,imax; mode = 0; // Default to the biggest mode avaible if ( mp_msg_test(MSGT_VO,MSGL_V) ) for(i=0;priv->fullmodes[i];++i) - printf("SDL Mode: %d: %d x %d\n", i, priv->fullmodes[i]->w, priv->fullmodes[i]->h); + mp_msg(MSGT_VO,MSGL_V, "SDL Mode: %d: %d x %d\n", i, priv->fullmodes[i]->w, priv->fullmodes[i]->h); for(i = findArrayEnd(priv->fullmodes) - 1; i >=0; i--) { if( (priv->fullmodes[i]->w >= priv->dstwidth) && (priv->fullmodes[i]->h >= priv->dstheight) ) { @@ -699,7 +701,7 @@ } } if ( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SET SDL Mode: %d: %d x %d\n", mode, priv->fullmodes[mode]->w, priv->fullmodes[mode]->h); } + mp_msg(MSGT_VO,MSGL_V, "SET SDL Mode: %d: %d x %d\n", mode, priv->fullmodes[mode]->w, priv->fullmodes[mode]->h); } priv->fullmode = mode; screen_surface_h = priv->fullmodes[mode]->h; screen_surface_w = priv->fullmodes[mode]->w; @@ -758,7 +760,7 @@ setup_surfaces(); } else - printf("set_fullmode: SDL_SetVideoMode failed: %s\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SDL_SetVideoModeFailedFull, SDL_GetError()); } @@ -780,7 +782,7 @@ switch(format){ case IMGFMT_I420: - printf("SDL: Mapping I420 to IYUV\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SDL_MappingI420ToIYUV); format = SDL_IYUV_OVERLAY; case IMGFMT_YV12: case IMGFMT_IYUV: @@ -802,14 +804,14 @@ priv->mode = RGB; break; default: - printf("SDL: Unsupported image format (0x%X)\n",format); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SDL_UnsupportedImageFormat,format); return -1; } if ( vo_config_count ) sdl_close(); if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: Using 0x%X (%s) image format\n", format, vo_format_name(format)); } + mp_msg(MSGT_VO,MSGL_V, "SDL: Using 0x%X (%s) image format\n", format, vo_format_name(format)); } if(priv->mode != YUV) { priv->sdlflags |= SDL_ANYFORMAT; @@ -857,13 +859,13 @@ // printf("SDL: Width: %i Height: %i D_Width %i D_Height: %i\n", width, height, d_width, d_height); if(flags&VOFLAG_FLIPPING) { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: using flipped video (only with RGB/BGR/packed YUV)\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: using flipped video (only with RGB/BGR/packed YUV)\n"); } priv->flip = 1; } if(flags&VOFLAG_FULLSCREEN) { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: setting zoomed fullscreen without modeswitching\n"); } - printf("SDL: Info - please use -vm or -zoom to switch to best resolution.\n"); + mp_msg(MSGT_VO,MSGL_V, "SDL: setting zoomed fullscreen without modeswitching\n");} + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SDL_InfoPleaseUseVmOrZoom); priv->fulltype = VOFLAG_FULLSCREEN; set_fullmode(priv->fullmode); /*if((priv->surface = SDL_SetVideoMode (d_width, d_height, priv->bpp, priv->sdlfullflags))) @@ -871,7 +873,7 @@ } else if(flags&VOFLAG_MODESWITCHING) { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: setting zoomed fullscreen with modeswitching\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: setting zoomed fullscreen with modeswitching\n"); } priv->fulltype = VOFLAG_MODESWITCHING; set_fullmode(priv->fullmode); /*if((priv->surface = SDL_SetVideoMode (d_width ? d_width : width, d_height ? d_height : height, priv->bpp, priv->sdlfullflags))) @@ -879,7 +881,7 @@ } else if(flags&VOFLAG_SWSCALE) { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: setting zoomed fullscreen with modeswitching\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: setting zoomed fullscreen with modeswitching\n"); } priv->fulltype = VOFLAG_SWSCALE; set_fullmode(priv->fullmode); } @@ -891,19 +893,19 @@ ||(strcmp(priv->driver, "cgx") == 0) ||((strcmp(priv->driver, "aalib") == 0) && priv->X)){ if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: setting windowed mode\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: setting windowed mode\n"); } set_video_mode(priv->dstwidth, priv->dstheight, priv->bpp, priv->sdlflags); } else { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: setting zoomed fullscreen with modeswitching\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: setting zoomed fullscreen with modeswitching\n"); } priv->fulltype = VOFLAG_SWSCALE; set_fullmode(priv->fullmode); } } if(!priv->surface) { // cannot SetVideoMode - printf("SDL: failed to set video mode: %s\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SDL_FailedToSetVideoMode, SDL_GetError()); return -1; } @@ -991,7 +993,7 @@ default: /* Initialize and create the YUV Overlay used for video out */ if (!(priv->overlay = SDL_CreateYUVOverlay (surfwidth, surfheight, priv->format, priv->surface))) { - printf ("SDL: Couldn't create a YUV overlay: %s\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SDL_CouldntCreateAYUVOverlay, SDL_GetError()); return -1; } priv->framePlaneY = priv->width * priv->height; @@ -1004,15 +1006,14 @@ if(priv->mode != YUV) { if(!priv->rgbsurface) { - printf ("SDL: Couldn't create a RGB surface: %s\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SDL_CouldntCreateARGBSurface, SDL_GetError()); return -1; } priv->dblit = 0; if((priv->format&0xFF) != priv->bpp) - printf("SDL: using depth/colorspace conversion, this will slow things" - "down (%ibpp -> %ibpp).\n", priv->format&0xFF, priv->bpp); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SDL_UsingDepthColorspaceConversion, priv->format&0xFF, priv->bpp); priv->framePlaneRGB = priv->width * priv->height * priv->rgbsurface->format->BytesPerPixel; priv->stridePlaneRGB = priv->width * priv->rgbsurface->format->BytesPerPixel; @@ -1140,7 +1141,7 @@ break; default: - printf("SDL: unsupported image format in draw_slice, contact MPlayer developers!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SDL_UnsupportedImageFormatInDrawslice); } SDL_OVR_UNLOCK @@ -1182,7 +1183,7 @@ priv->windowsize.h = priv->surface->h; //} if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) { - printf("SDL: Window resize\n"); } + mp_msg(MSGT_VO,MSGL_DBG3, "SDL: Window resize\n"); } break; case SDL_MOUSEBUTTONDOWN: @@ -1223,7 +1224,7 @@ #endif keypressed = event.key.keysym.sym; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("SDL: Key pressed: '%i'\n", keypressed); } + mp_msg(MSGT_VO,MSGL_DBG2, "SDL: Key pressed: '%i'\n", keypressed); } /* c key pressed. c cycles through available fullscreenmodes, if we have some */ if ( ((keypressed == SDLK_c)) && (priv->fullmodes) ) { @@ -1233,7 +1234,7 @@ set_fullmode(priv->fullmode); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("SDL: Set next available fullscreen mode.\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "SDL: Set next available fullscreen mode.\n"); } } else if ( keypressed == SDLK_n ) { @@ -1245,14 +1246,14 @@ priv->windowsize.w = priv->surface->w; priv->windowsize.h = priv->surface->h; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("SDL: Normal size\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "SDL: Normal size\n"); } } else if (priv->surface->w != priv->dstwidth * 2 || priv->surface->h != priv->dstheight * 2) { set_video_mode(priv->dstwidth * 2, priv->dstheight * 2, priv->bpp, priv->sdlflags); priv->windowsize.w = priv->surface->w; priv->windowsize.h = priv->surface->h; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("SDL: Double size\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "SDL: Double size\n"); } } } @@ -1511,7 +1512,7 @@ if(!priv->dblit) { /* blit to the RGB surface */ if(SDL_BlitSurface (priv->rgbsurface, NULL, priv->surface, NULL)) - printf("SDL: Blit failed: %s\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SDL_BlitFailed, SDL_GetError()); } /* update screen */ @@ -1575,7 +1576,7 @@ struct sdl_priv_s *priv = &sdl_priv; if(priv->X) { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: activating XScreensaver/DPMS\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: activating XScreensaver/DPMS\n"); } vo_x11_uninit(); } #endif @@ -1586,7 +1587,7 @@ SDL_QuitSubSystem(SDL_INIT_VIDEO); if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) { - printf("SDL: Closed Plugin\n"); } + mp_msg(MSGT_VO,MSGL_DBG3, "SDL: Closed Plugin\n"); } } @@ -1613,7 +1614,7 @@ priv->surface = NULL; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) { - printf("SDL: Opening Plugin\n"); } + mp_msg(MSGT_VO,MSGL_DBG3, "SDL: Opening Plugin\n"); } if(sdl_driver) { setenv("SDL_VIDEODRIVER", sdl_driver, 1); @@ -1637,24 +1638,24 @@ /* initialize the SDL Video system */ if (!SDL_WasInit(SDL_INIT_VIDEO)) { if (SDL_Init (SDL_INIT_VIDEO|SDL_INIT_NOPARACHUTE)) { - printf("SDL: Initializing of SDL failed: %s.\n", SDL_GetError()); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SDL_InitializingOfSDLFailed, SDL_GetError()); return -1; } } SDL_VideoDriverName(priv->driver, 8); - printf("SDL: Using driver: %s\n", priv->driver); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SDL_UsingDriver, priv->driver); priv->X = 0; #ifdef HAVE_X11 if(vo_init()) { if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: deactivating XScreensaver/DPMS\n"); } + mp_msg(MSGT_VO,MSGL_V, "SDL: deactivating XScreensaver/DPMS\n"); } priv->XWidth = vo_screenwidth; priv->XHeight = vo_screenheight; priv->X = 1; if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("SDL: X11 Resolution %ix%i\n", priv->XWidth, priv->XHeight); } + mp_msg(MSGT_VO,MSGL_V, "SDL: X11 Resolution %ix%i\n", priv->XWidth, priv->XHeight); } } #endif @@ -1720,11 +1721,11 @@ set_video_mode(priv->windowsize.w, priv->windowsize.h, priv->bpp, priv->sdlflags); SDL_ShowCursor(1); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("SDL: Windowed mode\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "SDL: Windowed mode\n"); } } else if (priv->fullmodes) { set_fullmode(priv->fullmode); if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("SDL: Set fullscreen mode\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "SDL: Set fullscreen mode\n"); } } return VO_TRUE; }
--- a/libvo/vo_svga.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_svga.c Mon Apr 24 04:23:53 2006 +0000 @@ -45,6 +45,7 @@ #include "sub.h" #include "mp_msg.h" +#include "help_mp.h" //#include "mp_image.h" #include <assert.h> @@ -171,7 +172,7 @@ force_vm=vga_getmodenumber(s); if(force_vm>0) { - if( mp_msg_test(MSGT_VO,MSGL_V) ) printf("vo_svga: Forcing mode %i\n",force_vm); + if( mp_msg_test(MSGT_VO,MSGL_V) ) mp_msg(MSGT_VO,MSGL_V, "vo_svga: Forcing mode %i\n",force_vm); }else{ force_vm = 0; } @@ -191,7 +192,7 @@ if (mode_capabilities&CAP_ACCEL_CLEAR){ if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: clearing box %d,%d - %d,%d with HW acceleration\n", + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: clearing box %d,%d - %d,%d with HW acceleration\n", x,y,w,h); if(mode_capabilities&CAP_ACCEL_BACKGR) vga_accel(ACCEL_SYNC); @@ -201,7 +202,7 @@ } if (mode_capabilities & CAP_LINEAR){ if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: clearing box %d,%d - %d,%d with memset\n",x,y,w,h); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: clearing box %d,%d - %d,%d with memset\n",x,y,w,h); rgbplane=PageStore[0].vbase + (y*mode_stride) + (x*modeinfo->bytesperpixel); for(i=0;i<h;i++){ //i'm afraid that memcpy is better optimized than memset;) @@ -213,7 +214,7 @@ } //native if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: clearing box %d,%d - %d,%d with native draw \n",x,y,w,h); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: clearing box %d,%d - %d,%d with native draw \n",x,y,w,h); if(modeinfo->bytesperpixel!=0) w*=modeinfo->bytesperpixel; for(i=0;i<h;i++){ vga_drawscansegment(zerobuf,x,y+i,w); @@ -229,7 +230,7 @@ if(mpi->flags & MP_IMGFLAG_DIRECT){ if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: drawing direct rendered surface\n"); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: drawing direct rendered surface\n"); cpage=(uint32_t)mpi->priv; assert((cpage>=0)&&(cpage<max_pages)); return VO_TRUE; //it's already done @@ -259,7 +260,7 @@ w=(stride*8)/mpi->bpp;//we transfer pixels in the stride so the source //ACCELERATE if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: using HW PutImage (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: using HW PutImage (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); if(mode_capabilities & CAP_ACCEL_BACKGR) vga_accel(ACCEL_SYNC); @@ -270,7 +271,7 @@ if( mode_capabilities&CAP_LINEAR){ //DIRECT if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: using Direct memcpy (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: using Direct memcpy (x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); bytesperline=(w*mpi->bpp)/8; base=PageStore[cpage].vbase + (y*mode_stride) + (x*mpi->bpp)/8; @@ -292,7 +293,7 @@ if(mpi->imgfmt==IMGFMT_RG4B || mpi->imgfmt==IMGFMT_BG4B) length=w; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: using Native vga_draw(x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: using Native vga_draw(x=%d,y=%d,w=%d,h=%d)\n",x,y,w,h); y+=PageStore[cpage].yoffset;//y position of the page beggining for(i=0;i<h;i++){ vga_drawscansegment(rgbplane,x,y+i,length); @@ -328,7 +329,7 @@ vminfo = vga_getmodeinfo(i); if( vminfo == NULL ) continue; if( mp_msg_test(MSGT_VO,MSGL_DBG4) ) - printf("vo_svga: testing mode %d (%s)\n",i,vga_getmodename(i)); + mp_msg(MSGT_VO,MSGL_DBG4, "vo_svga: testing mode %d (%s)\n",i,vga_getmodename(i)); if( vga_hasmode(i) == 0 ) continue; if( req_bpp != bpp_from_vminfo(vminfo) )continue; if( (vminfo->width < req_w) || (vminfo->height < req_h) ) continue; @@ -341,7 +342,7 @@ prev_badness=badness; bestmode=i; if( mp_msg_test(MSGT_VO,MSGL_DBG4) ) - printf("vo_svga: found good mode %d with badness %d\n",i,badness); + mp_msg(MSGT_VO,MSGL_DBG4, "vo_svga: found good mode %d with badness %d\n",i,badness); } } return bestmode; @@ -404,7 +405,7 @@ uint32_t accflags; if( mp_msg_test(MSGT_VO,MSGL_V) ) - printf("vo_svga: config(%i, %i, %i, %i, %08x, %s, %08x)\n", width, height, + mp_msg(MSGT_VO,MSGL_V, "vo_svga: config(%i, %i, %i, %i, %08x, %s, %08x)\n", width, height, d_width, d_height, flags, title, format); //Only RGB modes supported if (!IMGFMT_IS_RGB(format) && !IMGFMT_IS_BGR(format)) {assert(0);return -1;} @@ -414,8 +415,8 @@ if(!force_vm) { if ( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_svga: Looking for the best resolution...\n"); - printf("vo_svga: req_w: %d, req_h: %d, bpp: %d\n",req_w,req_h,req_bpp); + mp_msg(MSGT_VO,MSGL_V, "vo_svga: Looking for the best resolution...\n"); + mp_msg(MSGT_VO,MSGL_V, "vo_svga: req_w: %d, req_h: %d, bpp: %d\n",req_w,req_h,req_bpp); } vid_mode=find_best_svga_mode(req_w,req_h,req_bpp); if(vid_mode==0) @@ -424,24 +425,24 @@ }else{//force_vm vid_mode=force_vm; if(vga_hasmode(vid_mode) == 0){ - printf("vo_svga: forced vid_mode %d (%s) not available\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SVGA_ForcedVidmodeNotAvailable, vid_mode,vga_getmodename(vid_mode)); return 1; //error; } modeinfo=vga_getmodeinfo(vid_mode); if( (modeinfo->width < req_w) || (modeinfo->height < req_h) ){ - printf("vo_svga: forced vid_mode %d (%s) too small\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SVGA_ForcedVidmodeTooSmall, vid_mode,vga_getmodename(vid_mode)); return 1; } } mode_bpp=bpp_from_vminfo(modeinfo); - printf("vo_svga: vid_mode: %d, %dx%d %dbpp\n", + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_Vidmode, vid_mode,modeinfo->width,modeinfo->height,mode_bpp); if (vga_setmode(vid_mode) == -1) { - printf("vo_svga: vga_setmode(%d) failed.\n",vid_mode); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SVGA_VgasetmodeFailed,vid_mode); uninit(); return 1; // error } @@ -491,11 +492,11 @@ } }//fi force native if(mode_capabilities&CAP_LINEAR){ - printf("vo_svga: video mode is linear and memcpy could be used for image transfer\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_VideoModeIsLinearAndMemcpyCouldBeUsed); } if(mode_capabilities&CAP_ACCEL_PUTIMAGE){ - printf("vo_svga: video mode have hardware acceleration and put_image could be used\n"); - printf("vo_svga: If it works for you i would like to know \nvo_svga: (send log with `mplayer test.avi -v -v -v -v &> svga.log`). Thx\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_VideoModeHasHardwareAcceleration); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_IfItWorksForYouIWouldLineToKnow); } //here is the place to handle strides for accel_ modes; @@ -529,7 +530,7 @@ } } assert(max_pages>0); - printf("vo_svga: video mode have %d page(s)\n",max_pages); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_VideoModeHas,max_pages); //15bpp if(modeinfo->bytesperpixel!=0) vga_claimvideomemory(max_pages * modeinfo->height * modeinfo->width * modeinfo->bytesperpixel); @@ -544,14 +545,14 @@ x_pos = (modeinfo->width - req_w) / 2; y_pos = (modeinfo->height - req_h) / 2; x_pos &= ~(15); //align x offset position to 16 pixels - printf("vo_svga: centering image. start at (%d,%d)\n",x_pos,y_pos); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_CenteringImageStartAt,x_pos,y_pos); #ifdef CONFIG_VIDIX if(vidix_name[0]){ vidix_init(width, height, x_pos, y_pos, modeinfo->width, modeinfo->height, format, mode_bpp, modeinfo->width,modeinfo->height); - printf("vo_svga: Using VIDIX. w=%i h=%i mw=%i mh=%i\n",width,height, + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SVGA_UsingVidix,width,height, modeinfo->width,modeinfo->height); vidix_start(); /*set colorkey*/ @@ -593,7 +594,7 @@ static void draw_osd(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG4) ) - printf("vo_svga: draw_osd()\n"); + mp_msg(MSGT_VO,MSGL_DBG4, "vo_svga: draw_osd()\n"); //only modes with bytesperpixel>0 can draw OSD if(modeinfo->bytesperpixel==0) return; if(!(mode_capabilities&CAP_LINEAR)) return;//force_native will remove OSD @@ -622,9 +623,9 @@ PageStore[cpage].locks=PAGE_BUSY; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: viewing page %d\n",cpage); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: viewing page %d\n",cpage); if(sync_flip && old_page!=cpage){ - if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) printf("vo_svga:vga_waitretrace\n"); + if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga:vga_waitretrace\n"); vga_waitretrace(); } vga_setdisplaystart(PageStore[cpage].doffset); @@ -650,7 +651,7 @@ vga_modeinfo * vminfo; if ( mp_msg_test(MSGT_VO,MSGL_DBG4) ) - printf("vo_svga: query_format=%X \n",format); + mp_msg(MSGT_VO,MSGL_DBG4, "vo_svga: query_format=%X \n",format); //only RGB modes supported if( (!IMGFMT_IS_RGB(format)) && (!IMGFMT_IS_BGR(format)) ) return 0; @@ -688,7 +689,7 @@ char* base; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: draw_alpha(x0=%d,y0=%d,w=%d,h=%d,src=%p,srca=%p,stride=%d\n", + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: draw_alpha(x0=%d,y0=%d,w=%d,h=%d,src=%p,srca=%p,stride=%d\n", x0,y0,w,h,src,srca,stride); if(!blackbar_osd) { //drawing in the image, so place the stuff there @@ -697,7 +698,7 @@ } if( mp_msg_test(MSGT_VO,MSGL_DBG4) ) - printf("vo_svga: OSD draw in page %d\n",cpage); + mp_msg(MSGT_VO,MSGL_DBG4, "vo_svga: OSD draw in page %d\n",cpage); base=PageStore[cpage].vbase + y0*mode_stride + x0*modeinfo->bytesperpixel; switch (mode_bpp) { case 32: @@ -745,7 +746,7 @@ y_pos*mode_stride + (x_pos*mpi->bpp)/8; mpi->priv=(void *)page; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_svga: direct render allocated! page=%d\n",page); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_svga: direct render allocated! page=%d\n",page); return(VO_TRUE); } }
--- a/libvo/vo_syncfb.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_syncfb.c Mon Apr 24 04:23:53 2006 +0000 @@ -31,6 +31,8 @@ #include <errno.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" @@ -286,7 +288,7 @@ if ( dbg_singleframe ) { if ( debug_skip_first == 0 ) { - printf( "Press 'anykey' for field 1\n" ); + mp_msg(MSGT_VO,MSGL_INFO, "Press 'anykey' for field 1\n" ); getchar(); ioctl(f,SYNCFB_VBI,0); } @@ -302,14 +304,14 @@ } if ( debug_skip_first == 0 ) { - printf( "Press 'anykey' for field 2\n" ); + mp_msg(MSGT_VO,MSGL_INFO, "Press 'anykey' for field 2\n" ); getchar(); ioctl(f,SYNCFB_VBI,0); } } ioctl(f,SYNCFB_REQUEST_BUFFER,&bufinfo); - if ( bufinfo.id == -1 ) printf( "Got buffer #%d\n", bufinfo.id ); + if ( bufinfo.id == -1 ) mp_msg(MSGT_VO,MSGL_INFO, "Got buffer #%d\n", bufinfo.id ); vid_data = (uint_8 *)(frame_mem + bufinfo.offset); if ( bufinfo.id == -1 ) { @@ -322,7 +324,7 @@ static int draw_frame(uint8_t *src[]) { - printf("DRAW FRAME!!!\n"); + mp_msg(MSGT_VO,MSGL_INFO, "DRAW FRAME!!!\n"); if ( conf_palette == VIDEO_PALETTE_YUV422 ) { write_frame_YUV422(src[0],src[1], src[2]); } else if ( conf_palette == VIDEO_PALETTE_YUV420P2 ) { @@ -358,7 +360,7 @@ f = open("/dev/mga_vid",O_RDWR); if(f == -1) { - printf("Couldn't open /dev/syncfb or /dev/mga_vid\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SYNCFB_CouldntOpen); return(-1); } } @@ -368,15 +370,15 @@ if (sfb_caps.palettes & (1<<VIDEO_PALETTE_YUV420P3) ) { _config.src_palette= VIDEO_PALETTE_YUV420P3; - printf("using palette yuv420p3\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_UsingPaletteYuv420p3); }else if ( sfb_caps.palettes & (1<<VIDEO_PALETTE_YUV420P2) ) { _config.src_palette= VIDEO_PALETTE_YUV420P2; - printf("using palette yuv420p2\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_UsingPaletteYuv420p2); } else if ( sfb_caps.palettes & (1<<VIDEO_PALETTE_YUV422) ) { _config.src_palette= VIDEO_PALETTE_YUV422; - printf("using palette yuv422\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_UsingPaletteYuv420); } else { - printf("no supported palette found\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SYNCFB_NoSupportedPaletteFound); return -1; } @@ -409,19 +411,19 @@ _config.image_yorg= 0; - printf ("BES Sourcer size: %d x %d\n", width, height); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_BesSourcerSize, width, height); ioctl(f,SYNCFB_ON,0); if (ioctl(f,SYNCFB_SET_CONFIG,&_config)) perror("Error in mga_vid_config ioctl"); - printf ("Framebuffer memory: %ld in %ld buffers\n", sfb_caps.memory_size, _config.buffers); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_FramebufferMemory, sfb_caps.memory_size, _config.buffers); frame_size = ((width + 31) & ~31) * height + (((width + 31) & ~31) * height) / 2; frame_mem = (uint_8*)mmap(0,sfb_caps.memory_size,PROT_WRITE,MAP_SHARED,f,0); - printf( "Requesting first buffer #%d\n", bufinfo.id ); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_RequestingFirstBuffer, bufinfo.id ); ioctl(f,SYNCFB_REQUEST_BUFFER,&bufinfo); - printf( "Got first buffer #%d\n", bufinfo.id ); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SYNCFB_GotFirstBuffer, bufinfo.id ); vid_data = (uint_8 *)(frame_mem + bufinfo.offset); @@ -447,7 +449,7 @@ { if(arg) { - printf("vo_syncfb: Unknown subdevice: %s\n",arg); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SYNCFB_UnknownSubdevice,arg); return ENOSYS; } return 0;
--- a/libvo/vo_tdfx_vid.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_tdfx_vid.c Mon Apr 24 04:23:53 2006 +0000 @@ -36,6 +36,7 @@ #include "video_out_internal.h" #include "aspect.h" #include "mp_msg.h" +#include "help_mp.h" #include "fastmemcpy.h" #include "drivers/tdfx_vid.h" @@ -88,10 +89,10 @@ mov.dst = front_buffer; mov.dst_stride = tdfx_cfg.screen_stride; - printf("Move %d(%d) x %d => %d \n", mov.width,mov.src_stride,mov.height,mov.dst_stride); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_TDFXVID_Move, mov.width,mov.src_stride,mov.height,mov.dst_stride); if(ioctl(tdfx_fd,TDFX_VID_AGP_MOVE,&mov)) - printf("tdfx_vid: AGP move failed to clear the screen\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_AGPMoveFailedToClearTheScreen); } @@ -176,7 +177,7 @@ blit.dst_h = src_height; blit.dst_format = IMGFMT_BGR16; if(ioctl(tdfx_fd,TDFX_VID_BLIT,&blit)) - printf("tdfx_vid: Blit failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_BlitFailed); } return; } @@ -198,7 +199,7 @@ blit.dst_format = dst_fmt; if(ioctl(tdfx_fd,TDFX_VID_BLIT,&blit)) - printf("tdfx_vid: Blit failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_BlitFailed); } static int @@ -266,7 +267,7 @@ case IMGFMT_BGR24: case IMGFMT_BGR32: if(use_overlay) - printf("tdfx_vid: Non-native overlay format need conversion\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_TDFXVID_NonNativeOverlayFormatNeedConversion); case IMGFMT_BGR15: case IMGFMT_BGR16: src_bpp = ((format & 0x3F)+7)/8; @@ -282,7 +283,7 @@ src_bpp = 2; break; default: - printf("Unsupported input format 0x%x\n",format); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_UnsupportedInputFormat,format); return 1; } @@ -338,28 +339,28 @@ ov.use_colorkey = 0; if(ioctl(tdfx_fd,TDFX_VID_SET_OVERLAY,&ov)) { - printf("tdfxvid: Overlay setup failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_OverlaySetupFailed); use_overlay = 0; break; } tdfx_ov = ov; if(use_overlay == 1) { if(ioctl(tdfx_fd,TDFX_VID_OVERLAY_ON)) { - printf("tdfx_vid: Overlay on failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_OverlayOnFailed); use_overlay = 0; break; } use_overlay++; } - printf("tdfx_vid: Overlay ready : %d(%d) x %d @ %d => %d(%d) x %d @ %d\n", + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_TDFXVID_OverlayReady, src_width,src_stride,src_height,src_bpp, dst_width,dst_stride,dst_height,dst_bpp); break; } if(!use_overlay) - printf("tdfx_vid : Texture blit ready %d(%d) x %d @ %d => %d(%d) x %d @ %d\n", + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_TDFXVID_TextureBlitReady, src_width,src_stride,src_height,src_bpp, dst_width,dst_stride,dst_height,dst_bpp); @@ -371,7 +372,7 @@ { if(use_overlay == 2) { if(ioctl(tdfx_fd,TDFX_VID_OVERLAY_OFF)) - printf("tdfx_vid: Overlay off failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_OverlayOffFailed); use_overlay--; } close(tdfx_fd); @@ -388,17 +389,17 @@ tdfx_fd = open(arg ? arg : "/dev/tdfx_vid", O_RDWR); if(tdfx_fd < 0) { - printf("tdfx_vid: Can't open %s: %s\n",arg ? arg : "/dev/tdfx_vid", + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_CantOpen,arg ? arg : "/dev/tdfx_vid", strerror(errno)); return 1; } if(ioctl(tdfx_fd,TDFX_VID_GET_CONFIG,&tdfx_cfg)) { - printf("tdfx_vid: Can't get current cfg: %s\n",strerror(errno)); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_CantGetCurrentCfg,strerror(errno)); return 1; } - printf("tdfx_vid version %d\n" + mp_msg(MSGT_VO,MSGL_INFO, "tdfx_vid version %d\n" " Ram: %d\n" " Screen: %d x %d\n" " Format: %c%c%c%d\n", @@ -413,7 +414,7 @@ tdfx_fd, 0); if(agp_mem == MAP_FAILED) { - printf("tdfx_vid: Memmap failed !!!!!\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_MemmapFailed); return 1; } @@ -465,7 +466,7 @@ mpi->stride[2] = mpi->chroma_width; break; default: - printf("Get image todo\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_GetImageTodo); return VO_FALSE; } mpi->flags |= MP_IMGFLAG_DIRECT; @@ -532,7 +533,7 @@ mov.dst_stride = src_stride; if(ioctl(tdfx_fd,TDFX_VID_AGP_MOVE,&mov)) - printf("tdfx_vid: AGP move failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_AgpMoveFailed); break; case IMGFMT_YV12: @@ -561,7 +562,7 @@ yuv.base = back_buffer; yuv.stride = src_stride; if(ioctl(tdfx_fd,TDFX_VID_SET_YUV,&yuv)) { - printf("tdfx_vid: Set yuv failed\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_SetYuvFailed); break; } @@ -577,7 +578,7 @@ mov.dst_stride = TDFX_VID_YUV_STRIDE; if(ioctl(tdfx_fd,TDFX_VID_AGP_MOVE,&mov)) { - printf("tdfx_vid: AGP move failed on Y plane\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_AgpMoveFailedOnYPlane); break; } //return 0; @@ -589,7 +590,7 @@ mov.src_stride = buffer_stride[p]; mov.dst += TDFX_VID_YUV_PLANE_SIZE; if(ioctl(tdfx_fd,TDFX_VID_AGP_MOVE,&mov)) { - printf("tdfx_vid: AGP move failed on U plane\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_AgpMoveFailedOnUPlane); break; } // V @@ -598,12 +599,12 @@ mov.src_stride = buffer_stride[p]; mov.dst += TDFX_VID_YUV_PLANE_SIZE; if(ioctl(tdfx_fd,TDFX_VID_AGP_MOVE,&mov)) { - printf("tdfx_vid: AGP move failed on U plane\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_AgpMoveFailedOnVPlane); break; } break; default: - printf("What's that for a format 0x%x\n",mpi->imgfmt); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TDFXVID_WhatsThatForAFormat,mpi->imgfmt); return VO_TRUE; }
--- a/libvo/vo_tdfxfb.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_tdfxfb.c Mon Apr 24 04:23:53 2006 +0000 @@ -38,6 +38,8 @@ #include <linux/fb.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "fastmemcpy.h" #include "video_out.h" #include "video_out_internal.h" @@ -91,12 +93,12 @@ name = "/dev/fb0"; if((fd = open(name, O_RDWR)) == -1) { - printf("tdfxfb: can't open %s: %s\n", name, strerror(errno)); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_CantOpen, name, strerror(errno)); return -1; } if(ioctl(fd, FBIOGET_FSCREENINFO, &fb_finfo)) { - printf("tdfxfb: problem with FBITGET_FSCREENINFO ioctl: %s\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_ProblemWithFbitgetFscreenInfo, strerror(errno)); close(fd); fd = -1; @@ -104,7 +106,7 @@ } if(ioctl(fd, FBIOGET_VSCREENINFO, &fb_vinfo)) { - printf("tdfxfb: problem with FBITGET_VSCREENINFO ioctl: %s\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_ProblemWithFbitgetVscreenInfo, strerror(errno)); close(fd); fd = -1; @@ -113,8 +115,7 @@ /* BANSHEE means any of the series aparently */ if (fb_finfo.accel != FB_ACCEL_3DFX_BANSHEE) { - printf("tdfxfb: This driver is only supports the 3Dfx Banshee," - " Voodoo3 and Voodoo 5\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_ThisDriverIsOnlySupports); close(fd); fd = -1; return -1; @@ -127,7 +128,7 @@ case 32: break; // Ok default: - printf("tdfxfb: %d bpp output is not supported\n", fb_vinfo.bits_per_pixel); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_OutputIsNotSupported, fb_vinfo.bits_per_pixel); close(fd); fd = -1; return -1; @@ -140,7 +141,7 @@ MAP_SHARED, fd, fb_finfo.smem_len); if((long)memBase0 == -1 || (long)memBase1 == -1) { - printf("tdfxfb: Couldn't map memory areas: %s\n", strerror(errno)); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_CouldntMapMemoryAreas, strerror(errno)); if((long)memBase0 != -1) munmap(memBase0, fb_finfo.smem_len); if((long)memBase1 != -1) @@ -247,7 +248,7 @@ break; default: - printf("tdfxfb: %d bpp output is not supported (This should never happend)\n", fb_vinfo.bits_per_pixel); + MSGTR_LIBVO_TDFXFB_BppOutputIsNotSupported, fb_vinfo.bits_per_pixel); return -1; } @@ -285,7 +286,7 @@ break; default: - printf("tdfxfb: Eik! Something's wrong with control().\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_SomethingIsWrongWithControl); return -1; } @@ -302,7 +303,7 @@ inpageoffset = hidpageoffset + screenwidth * screenheight * screendepth; if(inpageoffset + in_width * in_depth * in_height > fb_finfo.smem_len) { - printf("tdfxfb: Not enough video memory to play this movie. Try at a lower resolution\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_TDFXFB_NotEnoughVideoMemoryToPlay); return -1; } @@ -314,7 +315,7 @@ memset(inpage, 0, in_width * in_height * in_depth); - printf("tdfxfb: screen is %dx%d at %d bpp, in is %dx%d at %d bpp, norm is %dx%d\n", + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_TDFXFB_ScreenIs, screenwidth, screenheight, screendepth * 8, in_width, in_height, in_depth * 8, d_width, d_height);
--- a/libvo/vo_tga.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_tga.c Mon Apr 24 04:23:53 2006 +0000 @@ -32,6 +32,8 @@ #include <math.h> #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "video_out.h" #include "video_out_internal.h" @@ -230,7 +232,7 @@ static int preinit(const char *arg) { if(arg) { - printf("vo_tga: Unknown subdevice: %s\n",arg); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_TGA_UnknownSubdevice,arg); return ENOSYS; } return 0;
--- a/libvo/vo_vesa.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_vesa.c Mon Apr 24 04:23:53 2006 +0000 @@ -15,6 +15,8 @@ note: triple buffering requires VBE 3.0 - need volunteers. */ #include "config.h" +#include "mp_msg.h" +#include "help_mp.h" #include "gtf.h" #include <stdio.h> #ifdef HAVE_MALLOC_H @@ -152,7 +154,7 @@ return retval; } -#define PRINT_VBE_ERR(name,err) { printf("vo_vesa: %s returns: %s\n",name,vbeErrToStr(err)); fflush(stdout); } +#define PRINT_VBE_ERR(name,err) { mp_msg(MSGT_VO,MSGL_WARN, "vo_vesa: %s returns: %s\n",name,vbeErrToStr(err)); fflush(stdout); } static void vesa_term( void ) { @@ -188,7 +190,7 @@ show_err: vesa_term(); PRINT_VBE_ERR("vbeSetWindow",err); - printf("vo_vesa: Fatal error occurred! Can't continue\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_FatalErrorOccurred); abort(); } win.low = new_offset * gran; @@ -280,7 +282,7 @@ uint8_t *dst[3]= {dga_buffer, NULL, NULL}; int dstStride[3]; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: draw_slice was called: w=%u h=%u x=%u y=%u\n",w,h,x,y); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: draw_slice was called: w=%u h=%u x=%u y=%u\n",w,h,x,y); dstStride[0]=dstride*((dstBpp+7)/8); dstStride[1]= dstStride[2]=dstStride[0]>>1; @@ -361,7 +363,7 @@ { uint32_t w,h; if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: draw_osd was called\n"); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: draw_osd was called\n"); { #ifdef OSD_OUTSIDE_MOVIE w = HAS_DGA()?video_mode_info.XResolution:dstW; @@ -377,7 +379,7 @@ static void flip_page(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: flip_page was called\n"); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: flip_page was called\n"); if(flip_trigger) { if(!HAS_DGA()) __vbeCopyData(dga_buffer); @@ -390,7 +392,7 @@ { vesa_term(); PRINT_VBE_ERR("vbeSetDisplayStart",err); - printf("vo_vesa: Fatal error occurred! Can't continue\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_FatalErrorOccurred); abort(); } multi_idx = multi_idx ? 0 : 1; @@ -412,7 +414,7 @@ static int draw_frame(uint8_t *src[]) { if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: draw_frame was called\n"); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: draw_frame was called\n"); if(sws) { int dstride=HAS_DGA()?video_mode_info.XResolution:dstW; @@ -456,14 +458,14 @@ else if(memcmp(sd,"vidix",5) == 0) vidix_name = &sd[5]; /* vidix_name will be valid within init() */ #endif - else { printf("vo_vesa: Unknown subdevice: '%s'\n", sd); return 0xFFFFFFFFUL; } + else { mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_UnkownSubdevice, sd); return 0xFFFFFFFFUL; } return flags; } static int query_format(uint32_t format) { if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: query_format was called: %x (%s)\n",format,vo_format_name(format)); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: query_format was called: %x (%s)\n",format,vo_format_name(format)); #ifdef CONFIG_VIDIX if(vidix_name)return(vidix_query_fourcc(format)); #endif @@ -538,14 +540,13 @@ if(screen_size%64) screen_size=((screen_size/64)*64)+64; total = vsize / screen_size; if( mp_msg_test(MSGT_VO,MSGL_V) ) - printf("vo_vesa: Can use up to %u video buffers\n",total); + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Can use up to %u video buffers\n",total); i = 0; offset = 0; total = min(total,nbuffs); while(i < total) { multi_buff[i++] = offset; offset += screen_size; } if(!i) - printf("vo_vesa: Your have too small size of video memory for this mode:\n" - "vo_vesa: Requires: %08lX exists: %08lX\n", screen_size, vsize); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_YourHaveTooSmallSizeOfVideoMemory, screen_size, vsize); return i; } @@ -564,8 +565,7 @@ monitor_dotclock = str2range(monitor_dotclock_str); if (!monitor_hfreq || !monitor_vfreq || !monitor_dotclock) { - printf("vo_vesa: you have to specify the capabilities of" - " the monitor. Not changing refresh rate.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_YouHaveToSpecifyTheCapabilitiesOfTheMonitor); return 0; } @@ -602,8 +602,7 @@ if (!in_range(monitor_vfreq,crtc_pass->RefreshRate/100)|| !in_range(monitor_hfreq,H_freq*1000)) { - printf( "vo_vesa: Unable to fit the mode into monitor's limitation." - " Not changing refresh rate.\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_UnableToFitTheMode); return 0; } @@ -633,13 +632,13 @@ fs_mode = 0; if(subdev_flags == 0xFFFFFFFEUL) { - printf("vo_vesa: detected internal fatal error: init is called before preinit\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_DetectedInternalFatalError); return -1; } if(subdev_flags == 0xFFFFFFFFUL) return -1; if(flags & VOFLAG_FLIPPING) { - printf("vo_vesa: switch -flip is not supported\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_SwitchFlipIsNotSupported); } if(flags & VOFLAG_SWSCALE) use_scaler = 1; if(flags & VOFLAG_FULLSCREEN) @@ -652,30 +651,29 @@ if((err=vbeGetControllerInfo(&vib)) != VBE_OK) { PRINT_VBE_ERR("vbeGetControllerInfo",err); - printf("vo_vesa: possible reason: No VBE2 BIOS found\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_PossibleReasonNoVbe2BiosFound); return -1; } /* Print general info here */ - printf("vo_vesa: Found VESA VBE BIOS Version %x.%x Revision: %x\n", + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_FoundVesaVbeBiosVersion, (int)(vib.VESAVersion >> 8) & 0xff, (int)(vib.VESAVersion & 0xff), (int)(vib.OemSoftwareRev & 0xffff)); - printf("vo_vesa: Video memory: %u Kb\n",vib.TotalMemory*64); - printf("vo_vesa: VESA Capabilities: %s %s %s %s %s\n" + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_VideoMemory,vib.TotalMemory*64); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_Capabilites ,vib.Capabilities & VBE_DAC_8BIT ? "8-bit DAC," : "6-bit DAC," ,vib.Capabilities & VBE_NONVGA_CRTC ? "non-VGA CRTC,":"VGA CRTC," ,vib.Capabilities & VBE_SNOWED_RAMDAC ? "snowed RAMDAC,":"normal RAMDAC," ,vib.Capabilities & VBE_STEREOSCOPIC ? "stereoscopic,":"no stereoscopic," ,vib.Capabilities & VBE_STEREO_EVC ? "Stereo EVC":"no stereo"); - printf("vo_vesa: !!! Below will be printed OEM info. !!!\n"); - printf("vo_vesa: You should watch 5 OEM related lines below else you've broken vm86\n"); - printf("vo_vesa: OEM info: %s\n",vib.OemStringPtr); - printf("vo_vesa: OEM Revision: %x\n",vib.OemSoftwareRev); - printf("vo_vesa: OEM vendor: %s\n",vib.OemVendorNamePtr); - printf("vo_vesa: OEM Product Name: %s\n",vib.OemProductNamePtr); - printf("vo_vesa: OEM Product Rev: %s\n",vib.OemProductRevPtr); - printf("vo_vesa: Hint: To get workable TV-Out you should have plugged tv-connector in\n" - "vo_vesa: before booting PC since VESA BIOS initializes itself only during POST\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_BelowWillBePrintedOemInfo); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_YouShouldSee5OemRelatedLines); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_OemInfo,vib.OemStringPtr); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_OemRevision,vib.OemSoftwareRev); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_OemVendor,vib.OemVendorNamePtr); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_OemProductName,vib.OemProductNamePtr); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_OemProductRev,vib.OemProductRevPtr); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_Hint); /* Find best mode here */ num_modes = 0; mode_ptr = vib.VideoModePtr; @@ -717,15 +715,15 @@ } if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: Requested mode: %ux%u@%u (%s)\n",width,height,bpp,vo_format_name(format)); - printf("vo_vesa: Total modes found: %u\n",num_modes); + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Requested mode: %ux%u@%u (%s)\n",width,height,bpp,vo_format_name(format)); + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Total modes found: %u\n",num_modes); mode_ptr = vib.VideoModePtr; - printf("vo_vesa: Mode list:"); + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Mode list:"); for(i = 0;i < num_modes;i++) { - printf(" %04X",mode_ptr[i]); + mp_msg(MSGT_VO,MSGL_V, " %04X",mode_ptr[i]); } - printf("\nvo_vesa: Modes in detail:\n"); + mp_msg(MSGT_VO,MSGL_V, "\nvo_vesa: Modes in detail:\n"); } mode_ptr = vib.VideoModePtr; if(use_scaler) @@ -760,7 +758,7 @@ } if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: Mode (%03u): mode=%04X %ux%u@%u attr=%04X\n" + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Mode (%03u): mode=%04X %ux%u@%u attr=%04X\n" "vo_vesa: #planes=%u model=%u(%s) #pages=%u\n" "vo_vesa: winA=%X(attr=%u) winB=%X(attr=%u) winSize=%u winGran=%u\n" "vo_vesa: direct_color=%u DGA_phys_addr=%08lX\n" @@ -769,7 +767,7 @@ ,vmib.WinASegment,vmib.WinAAttributes,vmib.WinBSegment,vmib.WinBAttributes,vmib.WinSize,vmib.WinGranularity ,vmib.DirectColorModeInfo,vmib.PhysBasePtr); if(vmib.MemoryModel == 6 || vmib.MemoryModel == 7) - printf("vo_vesa: direct_color_info = %u:%u:%u:%u\n" + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: direct_color_info = %u:%u:%u:%u\n" ,vmib.RedMaskSize,vmib.GreenMaskSize,vmib.BlueMaskSize,vmib.RsvdMaskSize); fflush(stdout); } @@ -784,14 +782,14 @@ return -1; } if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: Initial video mode: %x\n",init_mode); } + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Initial video mode: %x\n",init_mode); } if((err=vbeGetModeInfo(video_mode,&video_mode_info)) != VBE_OK) { PRINT_VBE_ERR("vbeGetModeInfo",err); return -1; } dstBpp = video_mode_info.BitsPerPixel; - printf("vo_vesa: Using VESA mode (%u) = %x [%ux%u@%u]\n" + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_UsingVesaMode ,best_mode_idx,video_mode,video_mode_info.XResolution ,video_mode_info.YResolution,dstBpp); if(subdev_flags & SUBDEV_NODGA) video_mode_info.PhysBasePtr = 0; @@ -826,11 +824,11 @@ sws = sws_getContextFromCmdLine(srcW,srcH,srcFourcc,dstW,dstH,dstFourcc); if(!sws) { - printf("vo_vesa: Can't initialize SwScaler\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_CantInitializeSwscaler); return -1; } else if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: Using SW BES emulator\n"); } + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Using SW BES emulator\n"); } } if((video_mode_info.WinAAttributes & FRAME_MODE) == FRAME_MODE) win.idx = 0; /* frame A */ @@ -846,7 +844,7 @@ vsize = vib.TotalMemory*64*1024; lfb = vbeMapVideoBuffer(video_mode_info.PhysBasePtr,vsize); if(lfb == NULL) - printf("vo_vesa: Can't use DGA. Force bank switching mode. :(\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_CantUseDga); else { video_base = win.ptr = lfb; @@ -854,7 +852,7 @@ win.high = vsize; win.idx = -1; /* HAS_DGA() is on */ video_mode |= VESA_MODE_USE_LINEAR; - printf("vo_vesa: Using DGA (physical resources: %08lXh, %08lXh)" + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_UsingDga ,video_mode_info.PhysBasePtr ,vsize); if( mp_msg_test(MSGT_VO,MSGL_V) ) { @@ -862,30 +860,30 @@ printf("\n"); if(!(multi_size = fillMultiBuffer(vsize,2))) return -1; if(vo_doublebuffering && multi_size < 2) - printf("vo_vesa: Can't use double buffering: not enough video memory\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_CantUseDoubleBuffering); } } if(win.idx == -2) { - printf("vo_vesa: Can't find neither DGA nor relocatable window's frame.\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_CantFindNeitherDga); return -1; } if(!HAS_DGA()) { if(subdev_flags & SUBDEV_FORCEDGA) { - printf("vo_vesa: you've forced DGA. Exiting\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_YouveForcedDga); return -1; } if(!(win_seg = win.idx == 0 ? video_mode_info.WinASegment:video_mode_info.WinBSegment)) { - printf("vo_vesa: Can't find valid window address\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_CantFindValidWindowAddress); return -1; } win.ptr = PhysToVirtSO(win_seg,0); win.low = 0L; win.high= video_mode_info.WinSize*1024; - printf("vo_vesa: Using bank switching mode (physical resources: %08lXh, %08lXh)\n" + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_UsingBankSwitchingMode ,(unsigned long)win.ptr,(unsigned long)win.high); } if(video_mode_info.XResolution > dstW) @@ -895,7 +893,7 @@ y_offset = (video_mode_info.YResolution - dstH) / 2; else y_offset = 0; if( mp_msg_test(MSGT_VO,MSGL_V) ) - printf("vo_vesa: image: %ux%u screen = %ux%u x_offset = %u y_offset = %u\n" + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: image: %ux%u screen = %ux%u x_offset = %u y_offset = %u\n" ,dstW,dstH ,video_mode_info.XResolution,video_mode_info.YResolution ,x_offset,y_offset); @@ -915,11 +913,11 @@ { if(!(dga_buffer = memalign(64,video_mode_info.XResolution*video_mode_info.YResolution*dstBpp))) { - printf("vo_vesa: Can't allocate temporary buffer\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_CantAllocateTemporaryBuffer); return -1; } if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: dga emulator was allocated = %p\n",dga_buffer); } + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: dga emulator was allocated = %p\n",dga_buffer); } } } if((err=vbeSaveState(&init_state)) != VBE_OK) @@ -952,28 +950,28 @@ if (neomagic_tvout) { err = vbeSetTV(video_mode,neomagic_tvnorm); if (err!=0x4f) { - printf("vo_vesa: Sorry unsupported mode, try -x 640 -zoom\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_VESA_SorryUnsupportedMode); } else { - printf("vo_vesa: Oh you really have picture on TV!\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_OhYouReallyHavePictureOnTv); } } /* Now we are in video mode!!!*/ /* Below 'return -1' is impossible */ if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: Graphics mode was activated\n"); + mp_msg(MSGT_VO,MSGL_V, "vo_vesa: Graphics mode was activated\n"); fflush(stdout); } if(lvo_name) { if(vlvo_init(width,height,x_offset,y_offset,dstW,dstH,format,dstBpp) != 0) { - printf("vo_vesa: Can't initialize Linux Video Overlay\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_CantInitialozeLinuxVideoOverlay); vesa_term(); return -1; } - else printf("vo_vesa: Using video overlay: %s\n",lvo_name); + else mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_UsingVideoOverlay,lvo_name); lvo_opened = 1; } #ifdef CONFIG_VIDIX @@ -984,11 +982,11 @@ dstH,format,dstBpp, video_mode_info.XResolution,video_mode_info.YResolution) != 0) { - printf("vo_vesa: Can't initialize VIDIX driver\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_CantInitializeVidixDriver); vesa_term(); return -1; } - else printf("vo_vesa: Using VIDIX\n"); + else mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_UsingVidix); vidix_start(); /* set colorkey */ @@ -1014,12 +1012,12 @@ } else { - printf("vo_vesa: Can't find mode for: %ux%u@%u\n",width,height,bpp); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_VESA_CantFindModeFor,width,height,bpp); return -1; } if( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vo_vesa: VESA initialization complete\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_VESA_InitializationComplete); fflush(stdout); } if(HAS_DGA() && vo_doublebuffering) @@ -1052,14 +1050,14 @@ // not inited vesa_term(); if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: uninit was called\n"); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: uninit was called\n"); } static void check_events(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: check_events was called\n"); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: check_events was called\n"); /* Nothing to do */ } @@ -1068,9 +1066,9 @@ int pre_init_err = 0; int fd; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) - printf("vo_vesa: preinit(%s) was called\n",arg); + mp_msg(MSGT_VO,MSGL_DBG2, "vo_vesa: preinit(%s) was called\n",arg); if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_vesa: subdevice %s is being initialized\n",arg); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_vesa: subdevice %s is being initialized\n",arg); subdev_flags = 0; lvo_name = NULL; #ifdef CONFIG_VIDIX @@ -1089,7 +1087,7 @@ else close(fd); if( mp_msg_test(MSGT_VO,MSGL_DBG3) ) - printf("vo_subdevice: initialization returns: %i\n",pre_init_err); + mp_msg(MSGT_VO,MSGL_DBG3, "vo_subdevice: initialization returns: %i\n",pre_init_err); return pre_init_err; }
--- a/libvo/vo_x11.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_x11.c Mon Apr 24 04:23:53 2006 +0000 @@ -44,6 +44,7 @@ #include "libmpcodecs/vf_scale.h" #include "mp_msg.h" +#include "help_mp.h" #ifdef HAVE_NEW_GUI #include "Gui/interface.h" @@ -654,7 +655,7 @@ return draw_slice(src, stride, srcW, srcH, 0, 0); #else - printf("draw_frame() called!!!!!!\n"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_X11_DrawFrameCalled); return -1; #endif }
--- a/libvo/vo_xv.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vo_xv.c Mon Apr 24 04:23:53 2006 +0000 @@ -668,7 +668,7 @@ static int draw_frame(uint8_t * src[]) { - printf("draw_frame() called!!!!!!"); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_XV_DrawFrameCalled); return -1; }
--- a/libvo/vosub_vidix.c Sun Apr 23 23:28:46 2006 +0000 +++ b/libvo/vosub_vidix.c Mon Apr 24 04:23:53 2006 +0000 @@ -25,6 +25,7 @@ #include "config.h" #include "mp_msg.h" +#include "help_mp.h" #include "vosub_vidix.h" #include "vidix/vidixlib.h" @@ -63,7 +64,7 @@ int err; if((err=vdlPlaybackOn(vidix_handler))!=0) { - printf("vosub_vidix: Can't start playback: %s\n",strerror(err)); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_CantStartPlayback,strerror(err)); return -1; } video_on=1; @@ -75,7 +76,7 @@ int err; if((err=vdlPlaybackOff(vidix_handler))!=0) { - printf("vosub_vidix: Can't stop playback: %s\n",strerror(err)); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_CantStopPlayback,strerror(err)); return -1; } video_on=0; @@ -85,7 +86,7 @@ void vidix_term( void ) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vosub_vidix: vidix_term() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: vidix_term() was called\n"); } vidix_stop(); vdlClose(vidix_handler); // ((vo_functions_t *)vo_server)->control=server_control; @@ -173,7 +174,7 @@ if (vidix_play.flags & VID_PLAY_INTERLEAVED_UV) { - printf("vosub_vidix: interleaved uv for yuv410p not supported\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SUB_VIDIX_InterleavedUvForYuv410pNotSupported); } else { @@ -249,13 +250,13 @@ uint32_t vidix_draw_slice(uint8_t *image[], int stride[], int w,int h,int x,int y) { - printf("vosub_vidix: dummy vidix_draw_slice() was called\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SUB_VIDIX_DummyVidixdrawsliceWasCalled); return -1; } static uint32_t vidix_draw_image(mp_image_t *mpi){ if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vosub_vidix: vidix_draw_image() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: vidix_draw_image() was called\n"); } // if -dr or -slices then do nothing: if(mpi->flags&(MP_IMGFLAG_DIRECT|MP_IMGFLAG_DRAW_CALLBACK)) return VO_TRUE; @@ -267,14 +268,14 @@ uint32_t vidix_draw_frame(uint8_t *image[]) { - printf("vosub_vidix: dummy vidix_draw_frame() was called\n"); + mp_msg(MSGT_VO,MSGL_WARN, MSGTR_LIBVO_SUB_VIDIX_DummyVidixdrawframeWasCalled); return -1; } void vidix_flip_page(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vosub_vidix: vidix_flip_page() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: vidix_flip_page() was called\n"); } if(vo_doublebuffering) { vdlPlaybackFrameSelect(vidix_handler,next_frame); @@ -335,7 +336,7 @@ void vidix_draw_osd(void) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vosub_vidix: vidix_draw_osd() was called\n"); } + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: vidix_draw_osd() was called\n"); } /* TODO: hw support */ vo_draw_text(vidix_play.src.w,vidix_play.src.h,draw_alpha); } @@ -343,7 +344,7 @@ uint32_t vidix_query_fourcc(uint32_t format) { if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vosub_vidix: query_format was called: %x (%s)\n",format,vo_format_name(format)); } + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: query_format was called: %x (%s)\n",format,vo_format_name(format)); } vidix_fourcc.fourcc = format; vdlQueryFourcc(vidix_handler,&vidix_fourcc); if (vidix_fourcc.depth == VID_DEPTH_NONE) @@ -414,7 +415,7 @@ int err; uint32_t sstride,apitch; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) - printf("vosub_vidix: vidix_init() was called\n" + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: vidix_init() was called\n" "src_w=%u src_h=%u dest_x_y_w_h = %u %u %u %u\n" "format=%s dest_bpp=%u vid_w=%u vid_h=%u\n" ,src_width,src_height,x_org,y_org,dst_width,dst_height @@ -422,7 +423,7 @@ if(vidix_query_fourcc(format) == 0) { - printf("vosub_vidix: unsupported fourcc for this vidix driver: %x (%s)\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_UnsupportedFourccForThisVidixDriver, format,vo_format_name(format)); return -1; } @@ -432,7 +433,7 @@ ((vidix_cap.maxheight != -1) && (vid_h > vidix_cap.maxheight)) || ((vidix_cap.minwidth != -1 ) && (vid_h < vidix_cap.minheight))) { - printf("vosub_vidix: video server has unsupported resolution (%dx%d), supported: %dx%d-%dx%d\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_VideoServerHasUnsupportedResolution, vid_w, vid_h, vidix_cap.minwidth, vidix_cap.minheight, vidix_cap.maxwidth, vidix_cap.maxheight); return -1; @@ -454,19 +455,19 @@ } if(err) { - printf("vosub_vidix: video server has unsupported color depth by vidix (%d)\n" + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_VideoServerHasUnsupportedColorDepth ,vidix_fourcc.depth); return -1; } if((dst_width > src_width || dst_height > src_height) && (vidix_cap.flags & FLAG_UPSCALER) != FLAG_UPSCALER) { - printf("vosub_vidix: vidix driver can't upscale image (%d%d -> %d%d)\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_DriverCantUpscaleImage, src_width, src_height, dst_width, dst_height); return -1; } if((dst_width > src_width || dst_height > src_height) && (vidix_cap.flags & FLAG_DOWNSCALER) != FLAG_DOWNSCALER) { - printf("vosub_vidix: vidix driver can't downscale image (%d%d -> %d%d)\n", + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_DriverCantDownscaleImage, src_width, src_height, dst_width, dst_height); return -1; } @@ -494,11 +495,11 @@ if((err=vdlConfigPlayback(vidix_handler,&vidix_play))!=0) { - printf("vosub_vidix: Can't configure playback: %s\n",strerror(err)); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_CantConfigurePlayback,strerror(err)); return -1; } if ( mp_msg_test(MSGT_VO,MSGL_V) ) { - printf("vosub_vidix: using %d buffer(s)\n", vidix_play.num_frames); } + mp_msg(MSGT_VO,MSGL_V, "vosub_vidix: using %d buffer(s)\n", vidix_play.num_frames); } vidix_mem = vidix_play.dga_addr; @@ -709,10 +710,10 @@ { int err; if( mp_msg_test(MSGT_VO,MSGL_DBG2) ) { - printf("vosub_vidix: vidix_preinit(%s) was called\n",drvname); } + mp_msg(MSGT_VO,MSGL_DBG2, "vosub_vidix: vidix_preinit(%s) was called\n",drvname); } if(vdlGetVersion() != VIDIX_VERSION) { - printf("vosub_vidix: You have wrong version of VIDIX library\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_YouHaveWrongVersionOfVidixLibrary); return -1; } #ifndef __MINGW32__ @@ -729,16 +730,16 @@ if(vidix_handler == NULL) { - printf("vosub_vidix: Couldn't find working VIDIX driver\n"); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_CouldntFindWorkingVidixDriver); return -1; } if((err=vdlGetCapability(vidix_handler,&vidix_cap)) != 0) { - printf("vosub_vidix: Couldn't get capability: %s\n",strerror(err)); + mp_msg(MSGT_VO,MSGL_ERR, MSGTR_LIBVO_SUB_VIDIX_CouldntGetCapability,strerror(err)); return -1; } - printf("VIDIX: Description: %s\n", vidix_cap.name); - printf("VIDIX: Author: %s\n", vidix_cap.author); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SUB_VIDIX_Description, vidix_cap.name); + mp_msg(MSGT_VO,MSGL_INFO, MSGTR_LIBVO_SUB_VIDIX_Author, vidix_cap.author); /* we are able to tune up this stuff depend on fourcc format */ ((vo_functions_t *)server)->draw_slice=vidix_draw_slice; ((vo_functions_t *)server)->draw_frame=vidix_draw_frame;