Mercurial > mplayer.hg
changeset 16749:a3e5975a7618
further sync by Emfox Zhou < emfoxzhou -- at -- gmail -- dot -- com >
| author | diego |
|---|---|
| date | Thu, 13 Oct 2005 13:24:35 +0000 |
| parents | ec02252fbaa6 |
| children | 0a31740dd5e6 |
| files | help/help_mp-zh_CN.h |
| diffstat | 1 files changed, 192 insertions(+), 5 deletions(-) [+] |
line wrap: on
line diff
--- a/help/help_mp-zh_CN.h Thu Oct 13 12:13:49 2005 +0000 +++ b/help/help_mp-zh_CN.h Thu Oct 13 13:24:35 2005 +0000 @@ -257,13 +257,83 @@ " or \"-lameopts preset=extreme \"\n"\ "\n"\ "更多信息，请试着: \"-lameopts preset=help\"\n" +#define MSGTR_LamePresetsLongInfo "\n"\ +"预设开关被设计为提供最好的品质.\n"\ +"\n"\ +"它们的大多数的部分已经通过严格的 double blind listening 测试来调整和检验性能\n"\ +"以达到我们预期的目标.\n"\ +"\n"\ +"它们不断地被升级以便和最新的发展保持一致的步调,\n"\ +"所以应该能给你提供当然LAME所能提供的将近最好的品质.\n"\ +"\n"\ +"激活这样预设值:\n"\ +"\n"\ +" VBR模式(通常情况下的最高品质):\n"\ +"\n"\ +" \"preset=standard\" 此项预设值显然应该是大多数人在处理大多数的音乐的时候\n"\ + " 所要用到的选项, 它的品质已经非常高的了.\n" \ +"\n"\ +" \"preset=extreme\" 如果你有极好的听力和相当的设备, 这项预设值一般会比\n"\ +" \"standard\"模式的品质还要提高一点.\n"\ +"\n"\ +" CBR 320kbps(预设开关选项里的最高质量):\n"\ +"\n"\ +" \"preset=insane\" 对于大多数人和在大多数情况下, 这个选项都显得有些过度了.\n"\ +" 但是如果你一定要有最高品质并且完全不关心文件大小,\n"\ +" 那这正是适合你的.\n"\ +"\n"\ +" ABR模式(high quality per given bitrate but not as high as VBR):\n"\ +"\n"\ +" \"preset=<kbps>\" 使用这个预设值总是会在一个给定的比特率有不错的品质.\n"\ +" 当指定一个确定的比特率, 预设值将会决定这种情况下所能达\n"\ +" 到的最好效果的设置. \n"\ +" 虽然这种方法是可以的, 但它并没有VBR模式那么灵活, 同样\n"\ +" 一般也不能达到VBR在高比特率下的同等品质. \n"\ +"\n"\ +"以下选项在一致的配置文件的情况下也可使用:\n"\ +"\n"\ +" <fast> standard\n"\ +" <fast> extreme\n"\ +" insane\n"\ +" <cbr> (ABR Mode) - ABR模式是清楚的. 要使用这个选项,\n"\ +" 简单地指定一个比特率就行了. 例如:\n"\ +" \"preset=185\"就可以激活这个\n"\ +" 预设值并使用185作为平均比特率.\n"\ +"\n"\ +" \"fast\" - 给一个特定的配置文件启用新的快速VBR模式. 速度切换\n"\ +" 的坏处是经常性的比特率要比一般情况下的要高, 品质也会\n"\ +" 低一点点.\n"\ +" 警告: 在当前版本下, 快速预设值可能有点比一般模式偏高得太多了.\n"\ +"\n"\ +" \"cbr\" - 如果你在特定比特率使用ABR模式(见上), 比如80,\n"\ +" 96, 112, 128, 160, 192, 224, 256, 320, 你可\n"\ +" 以使用\"cbr\"选项来强制使用CBR模式编码以代替标准\n"\ +" abr模式. ABR不提供更高的品质, 但是cbr可能会用到,\n"\ +" 某些情况下比如从internet传送一个mp3的流时就会相\n"\ +" 当重要了.\n"\ +"\n"\ +" 例如:\n"\ +"\n"\ +" \"-lameopts fast:preset=standard \"\n"\ +" or \"-lameopts cbr:preset=192 \"\n"\ +" or \"-lameopts preset=172 \"\n"\ +" or \"-lameopts preset=extreme \"\n"\ +"\n"\ +"\n"\ +"ABR模式下的一些可用的别名(alias):\n"\ +"phone => 16kbps/mono phon+/lw/mw-eu/sw => 24kbps/mono\n"\ +"mw-us => 40kbps/mono voice => 56kbps/mono\n"\ +"fm/radio/tape => 112kbps hifi => 160kbps\n"\ +"cd => 192kbps studio => 256kbps" #define MSGTR_LameCantInit "无法设定LAME选项, 检查比特率/采样率,"\ "一些非常低的比特率(<32)需要低采样率(如 -srate 8000)."\ "如果都不行, 试试使用预设值." #define MSGTR_ConfigfileError "配置文件错误" #define MSGTR_ErrorParsingCommandLine "解析命令行错误" +#define MSGTR_VideoStreamRequired "视频流是必须的!\n" #define MSGTR_ForcingInputFPS "输入帧率将被%5.2f代替\n" #define MSGTR_RawvideoDoesNotSupportAudio "输出文件格式RAWVIDEO不支持音频 - 取消音频\n" +#define MSGTR_DemuxerDoesntSupportNosound "这个demuxer当前还不支持 -nosound.\n" #define MSGTR_MemAllocFailed "内存分配失败" #define MSGTR_NoMatchingFilter "没找到匹配的filter/ao格式!\n" #define MSGTR_MP3WaveFormatSizeNot30 "sizeof(MPEGLAYER3WAVEFORMAT)==%d!=30, C编译器挂了?\n" @@ -560,6 +630,8 @@ #define MSGTR_SKIN_WARNING1 "[skin] 警告, 在配置文件的 %d行:\n找到widget但在这之前没有找到\"section\" (%s)" #define MSGTR_SKIN_WARNING2 "[skin] 警告, 在配置文件的 %d行:\n找到widget但在这之前没有找到 \"subsection\" (%s) " #define MSGTR_SKIN_WARNING3 "[skin] 警告, 在配置文件的 %d行:\n这个widget不支持这个subsection(%s)" +#define MSGTR_SKIN_SkinFileNotFound "[skin] 文件( %s )没找到.\n" +#define MSGTR_SKIN_SkinFileNotReadable "[skin] 文件( %s )不可读.\n" #define MSGTR_SKIN_BITMAP_16bit "不支持少于16 bits色深的位图(%s).\n" #define MSGTR_SKIN_BITMAP_FileNotFound "找不到文件(%s)\n" #define MSGTR_SKIN_BITMAP_BMPReadError "BMP读取错误(%s)\n" @@ -575,7 +647,8 @@ #define MSGTR_SKIN_FONT_FontImageNotFound "找不到字体图像文件.\n" #define MSGTR_SKIN_FONT_NonExistentFontID "不存在的字体标签( %s )\n" #define MSGTR_SKIN_UnknownParameter "未知参数( %s )\n" -#define MSGTR_SKIN_SKINCFG_SkinNotFound "找不到Skin( %s ).\n" +#define MSGTR_SKIN_SKINCFG_SkinNotFound "找不到skin( %s ).\n" +#define MSGTR_SKIN_SKINCFG_SelectedSkinNotFound "选定的skin( %s )没找到, 试着使用'default'...\n" #define MSGTR_SKIN_SKINCFG_SkinCfgReadError "Skin配置文件( %s )读取错误.\n" #define MSGTR_SKIN_LABEL "Skins:" @@ -596,6 +669,7 @@ #define MSGTR_MENU_NextStream "下一个" #define MSGTR_MENU_PrevStream "上一个" #define MSGTR_MENU_Size "大小" +#define MSGTR_MENU_HalfSize "一半大小" #define MSGTR_MENU_NormalSize "正常大小" #define MSGTR_MENU_DoubleSize "双倍大小" #define MSGTR_MENU_FullScreen "全屏" @@ -610,7 +684,9 @@ #define MSGTR_MENU_Chapter "Chapter %2d" #define MSGTR_MENU_AudioLanguages "音频语言" #define MSGTR_MENU_SubtitleLanguages "字幕语言" +#define MSGTR_MENU_PlayList MSGTR_PlayList #define MSGTR_MENU_SkinBrowser "Skin浏览器" +#define MSGTR_MENU_Preferences MSGTR_Preferences #define MSGTR_MENU_Exit "退出..." #define MSGTR_MENU_Mute "静音" #define MSGTR_MENU_Original "原始的" @@ -620,7 +696,9 @@ #define MSGTR_MENU_VideoTrack "视频轨道" // --- equalizer +// Note: If you change MSGTR_EQU_Audio please see if it still fits MSGTR_PREFERENCES_Audio #define MSGTR_EQU_Audio "音频" +// Note: If you change MSGTR_EQU_Video please see if it still fits MSGTR_PREFERENCES_Video #define MSGTR_EQU_Video "视频" #define MSGTR_EQU_Contrast "对比度: " #define MSGTR_EQU_Brightness "亮度: " @@ -647,14 +725,20 @@ #define MSGTR_PLAYLIST_DirectoryTree "目录树" // --- preferences +#define MSGTR_PREFERENCES_Audio MSGTR_EQU_Audio +#define MSGTR_PREFERENCES_Video MSGTR_EQU_Video #define MSGTR_PREFERENCES_SubtitleOSD "字幕和OSD" +#define MSGTR_PREFERENCES_Codecs "Codecs和demuxer" +// Note: If you change MSGTR_PREFERENCES_Misc see if it still fits MSGTR_PREFERENCES_FRAME_Misc #define MSGTR_PREFERENCES_Misc "其他" #define MSGTR_PREFERENCES_None "None" +#define MSGTR_PREFERENCES_DriverDefault "默认驱动" #define MSGTR_PREFERENCES_AvailableDrivers "可用驱动:" #define MSGTR_PREFERENCES_DoNotPlaySound "不播放声音" #define MSGTR_PREFERENCES_NormalizeSound "声音标准化" #define MSGTR_PREFERENCES_EnEqualizer "开启均衡器" +#define MSGTR_PREFERENCES_SoftwareMixer "开启软件混音器" #define MSGTR_PREFERENCES_ExtraStereo "开启立体声加强" #define MSGTR_PREFERENCES_Coefficient "参数:" #define MSGTR_PREFERENCES_AudioDelay "音频延迟" @@ -677,7 +761,6 @@ #define MSGTR_PREFERENCES_SUB_SRT "将所给字幕转换为基于时间的SubViewer(SRT) 格式" #define MSGTR_PREFERENCES_SUB_Overlap "开启字幕重叠" #define MSGTR_PREFERENCES_Font "字体:" -#define MSGTR_PREFERENCES_Codecs "Codecs和demuxer" #define MSGTR_PREFERENCES_FontFactor "字体效果:" #define MSGTR_PREFERENCES_PostProcess "开启后期处理" #define MSGTR_PREFERENCES_AutoQuality "自动控制质量: " @@ -691,6 +774,10 @@ #define MSGTR_PREFERENCES_FRAME_PostProcess "后期处理" #define MSGTR_PREFERENCES_FRAME_CodecDemuxer "Codec和demuxer" #define MSGTR_PREFERENCES_FRAME_Cache "缓存" +#define MSGTR_PREFERENCES_FRAME_Misc MSGTR_PREFERENCES_Misc +#define MSGTR_PREFERENCES_Audio_Device "设备:" +#define MSGTR_PREFERENCES_Audio_Mixer "混音器:" +#define MSGTR_PREFERENCES_Audio_MixerChannel "混音通道:" #define MSGTR_PREFERENCES_Message "请记住, 有些功能只有重新播放后才有效果." #define MSGTR_PREFERENCES_DXR3_VENC "视频编码器:" #define MSGTR_PREFERENCES_DXR3_LAVC "使用LAVC(FFmpeg)" @@ -738,6 +825,8 @@ #define MSGTR_PREFERENCES_DVDDevice "DVD设备:" #define MSGTR_PREFERENCES_FPS "电影的FPS:" #define MSGTR_PREFERENCES_ShowVideoWindow "在非激活状态下显示视频窗口" +#define MSGTR_PREFERENCES_ArtsBroken "新的aRts版本和GTK 1.x不兼容,"\ + "会使GMPlayer崩溃!" #define MSGTR_ABOUT_UHU "GUI开发由UHU Linux赞助\n" #define MSGTR_ABOUT_CoreTeam " MPlayer核心小组:\n" @@ -745,8 +834,106 @@ #define MSGTR_ABOUT_MainTesters " 主要测试者:\n" // --- messagebox -#define MSGTR_MSGBOX_LABEL_FatalError "致命错误..." -#define MSGTR_MSGBOX_LABEL_Error "错误..." -#define MSGTR_MSGBOX_LABEL_Warning "警告..." +#define MSGTR_MSGBOX_LABEL_FatalError "致命错误!" +#define MSGTR_MSGBOX_LABEL_Error "错误!" +#define MSGTR_MSGBOX_LABEL_Warning "警告!" + +// bitmap.c + +#define MSGTR_NotEnoughMemoryC32To1 "[c32to1] 内存不够, 容不下图片\n" +#define MSGTR_NotEnoughMemoryC1To32 "[c1to32] 内存不够, 容不下图片\n" + +// cfg.c + +#define MSGTR_ConfigFileReadError "[cfg] 读配置文件错误...\n" +#define MSGTR_UnableToSaveOption "[cfg] 无法保存'%s'选项.\n" + +// interface.c + +#define MSGTR_DeletingSubtitles "[GUI] 删除字幕.\n" +#define MSGTR_LoadingSubtitles "[GUI] 导入字幕: %s\n" +#define MSGTR_AddingVideoFilter "[GUI] 加入视频过滤器: %s\n" +#define MSGTR_RemovingVideoFilter "[GUI] 删除视频过滤器: %s\n" + +// mw.c + +#define MSGTR_NotAFile "这看起来不像是一个文件: %s !\n" + +// ws.c + +#define MSGTR_WS_CouldNotOpenDisplay "[ws] 无法打开display.\n" +#define MSGTR_WS_RemoteDisplay "[ws] 远程display, 取消XMITSHM.\n" +#define MSGTR_WS_NoXshm "[ws] 抱歉, 你的系统不支持X共享内存扩展.\n" +#define MSGTR_WS_NoXshape "[ws] 抱歉, 你的系统不支持XShape扩展.\n" +#define MSGTR_WS_ColorDepthTooLow "[ws] 抱歉, 色彩深度太低了.\n" +#define MSGTR_WS_TooManyOpenWindows "[ws] 打开的窗口太多了.\n" +#define MSGTR_WS_ShmError "[ws] 共享内存扩展错误\n" +#define MSGTR_WS_NotEnoughMemoryDrawBuffer "[ws] 抱歉, 内存不够画写缓冲(draw buffer).\n" +#define MSGTR_WS_DpmsUnavailable "DPMS不可用?\n" +#define MSGTR_WS_DpmsNotEnabled "不能启用DPMS.\n" + +// wsxdnd.c + +#define MSGTR_WS_NotAFile "这看起来不像是一个文件...\n" +#define MSGTR_WS_DDNothing "D&D: 没有任何东西返回!\n" #endif + +// ======================= VO Video Output drivers ======================== + +#define MSGTR_VOincompCodec "选定的视频输出设备和这个编解码器不兼容.\n"\ + "试着加入缩放过滤器, 例如以 -vf spp,scale 来代替 -vf spp.\n" +#define MSGTR_VO_GenericError "这个错误已经发生" +#define MSGTR_VO_UnableToAccess "无法访问" +#define MSGTR_VO_ExistsButNoDirectory "已经存在, 但不是一个目录." +#define MSGTR_VO_DirExistsButNotWritable "输出目录已经存在, 但是不可写." +#define MSGTR_VO_DirExistsAndIsWritable "输出目录已经存在并且可写." +#define MSGTR_VO_CantCreateDirectory "无法创建输出目录." +#define MSGTR_VO_CantCreateFile "无法创建输出文件." +#define MSGTR_VO_DirectoryCreateSuccess "输出目录成功创建." +#define MSGTR_VO_ParsingSuboptions "解析子选项." +#define MSGTR_VO_SuboptionsParsedOK "子选项解析成功." +#define MSGTR_VO_ValueOutOfRange "值超出范围" +#define MSGTR_VO_NoValueSpecified "没有指定值." +#define MSGTR_VO_UnknownSuboptions "未知子选项" + +// vo_aa.c + +#define MSGTR_VO_AA_HelpHeader "\n\n这里是 aalib vo_aa 的子选项:\n" +#define MSGTR_VO_AA_AdditionalOptions "vo_aa 提供的附加选项:\n" \ +" help 显示此帮助信息\n" \ +" osdcolor 设定osd颜色\n subcolor 设定字幕颜色\n" \ +" 颜色参数有:\n 0 : 一般\n" \ +" 1 : 模糊\n 2 : 粗\n 3 : 粗字体\n" \ +" 4 : 反色\n 5 : 特殊\n\n\n" + +// vo_jpeg.c +#define MSGTR_VO_JPEG_ProgressiveJPEG "启用Progressive JPEG." +#define MSGTR_VO_JPEG_NoProgressiveJPEG "取消Progressive JPEG." +#define MSGTR_VO_JPEG_BaselineJPEG "启用Baseline JPEG." +#define MSGTR_VO_JPEG_NoBaselineJPEG "取消Baseline JPEG." + +// vo_pnm.c +#define MSGTR_VO_PNM_ASCIIMode "启用ASCII模式." +#define MSGTR_VO_PNM_RawMode "启用Raw模式." +#define MSGTR_VO_PNM_PPMType "将要写入PPM文件." +#define MSGTR_VO_PNM_PGMType "将要写入PGM文件." +#define MSGTR_VO_PNM_PGMYUVType "将要写入PGMYUV文件." + +// vo_yuv4mpeg.c +#define MSGTR_VO_YUV4MPEG_InterlacedHeightDivisibleBy4 "交错模式需要图像高度能被4整除." +#define MSGTR_VO_YUV4MPEG_InterlacedLineBufAllocFail "无法为交错模式分配线缓冲." +#define MSGTR_VO_YUV4MPEG_InterlacedInputNotRGB "输入不是RGB, 不能按域分开色讯!" +#define MSGTR_VO_YUV4MPEG_WidthDivisibleBy2 "图像宽度必须能被2整除." +#define MSGTR_VO_YUV4MPEG_NoMemRGBFrameBuf "内存不够, 不能分配RGB缓冲." +#define MSGTR_VO_YUV4MPEG_OutFileOpenError "不能得到内存或文件句柄以写入\"%s\"!" +#define MSGTR_VO_YUV4MPEG_OutFileWriteError "写图像到输出错误!" +#define MSGTR_VO_YUV4MPEG_UnknownSubDev "未知的子设备: %s" +#define MSGTR_VO_YUV4MPEG_InterlacedTFFMode "使用交错输出模式(上层域在前)." +#define MSGTR_VO_YUV4MPEG_InterlacedBFFMode "使用交错输出模式(下层域在前)." +#define MSGTR_VO_YUV4MPEG_ProgressiveMode "使用(默认)progressive帧模式." + +// Old vo drivers that have been replaced + +#define MSGTR_VO_PGM_HasBeenReplaced "Pgm视频输出驱动已经被 -vo pnm:pgmyuv 代替.\n" +#define MSGTR_VO_MD5_HasBeenReplaced "Md5视频输出驱动已经被 -vo md5sum 代替.\n"