changeset 15113:a53b942816a5

Removes the section "menc-feat-fix-avi" as part of it was wrong and the other belonged to the faq. Does a bit of reformating and spellings fixes.

--- a/DOCS/xml/en/mencoder.xml	Sun Apr 10 20:53:48 2005 +0000
+++ b/DOCS/xml/en/mencoder.xml	Sun Apr 10 20:59:33 2005 +0000
@@ -140,47 +140,6 @@
 </sect1>
 
 
-<sect1 id="menc-feat-fix-avi">
-<title>Fixing AVIs with broken index or interleaving</title>
-
-<para>
-Easiest thing. We simply copy the video and audio streams, and
-<application>MEncoder</application> generates the index. Of course this cannot fix possible bugs in
-the video and/or audio streams. It also fixes files with broken interleaving,
-thus the <option>-ni</option> option won't be needed for them anymore.
-</para>
-
-<para>
-Command:
-<screen>
-mencoder -idx <replaceable>input.avi</replaceable> -ovc copy -oac copy -o <replaceable>output.avi</replaceable><!--
---></screen>
-</para>
-
-
-<sect2 id="menc-feat-appending">
-<title>Appending multiple AVI files</title>
-
-<para>
-As a side-effect, the broken AVI fixer function enables <application>MEncoder</application>
-to append 2 (or more) AVI files:
-</para>
-
-<para>
-Command:
-<screen>cat <replaceable>1.avi</replaceable> <replaceable>2.avi</replaceable> &gt; <replaceable>3.avi</replaceable>
-mencoder -noidx -ovc copy -oac copy -o <replaceable>output.avi</replaceable> <replaceable>3.avi</replaceable></screen>
-</para>
-
-<note><para>
-This expects <filename>1.avi</filename> and <filename>2.avi</filename> to use
-the same codecs, resolution, stream rate etc, and at least <filename>1.avi</filename>
-must not be broken. You may need to fix your input AVI files first, as described
-<link linkend="menc-feat-fix-avi">above</link>.
-</para></note>
-</sect2>
-</sect1>
-
 <sect1 id="menc-feat-enc-libavcodec">
 <title>Encoding with the <systemitem class="library">libavcodec</systemitem>
   codec family</title>
@@ -660,14 +619,17 @@
   audio track(s), so you should <link linkend="menc-feat-dvd-mpeg4-audio">rip
   those</link> first.
   You can compute the bitrate with the following equation:
-  bitrate = (target_size_in_Mbytes - sound_size_in_Mbytes) * 1024 * 1024 / length_in_secs * 8 / 1000
+  <equation>bitrate = (target_size_in_Mbytes - sound_size_in_Mbytes) *
+  1024 * 1024 / length_in_secs * 8 / 1000</equation>
   For instance, to squeeze a two-hour movie onto a 702MB CD, with 60MB
-  of audio track, the video bitrate will have to be
-  (702 - 60) * 1024 * 1024 / (120*60) * 8 / 1000 = 740kbps.
+  of audio track, the video bitrate will have to be:
+  <equation>(702 - 60) * 1024 * 1024 / (120*60) * 8 / 1000
+  = 740kbps</equation>
 </para>
 
 </sect2>
 
+
 <sect2 id="menc-feat-dvd-mpeg4-crop">
 <title>Cropping and Scaling</title>
 
@@ -721,7 +683,7 @@
 
 <para>
   First, you should compute the encoded aspect ratio:
-  ARc = (Wc x (ARa / PRdvd )) / Hc
+  <equation>ARc = (Wc x (ARa / PRdvd )) / Hc</equation>
 <itemizedlist>
 <title>where:</title>
 <listitem><para>
@@ -739,8 +701,8 @@
 <para>
   Then, you can compute the X and Y resolution, according to a certain
   Compression Quality (CQ) factor:
-  ResY = INT( SQRT(1000 * Bitrate / 25 / ARc / CQ) / 16 ) * 16
-  ResX = INT( ResY * ARc / 16) * 16
+  <equation>ResY = INT(SQRT( 1000*Bitrate/25/ARc/CQ )/16) * 16</equation>
+  <equation>ResX = INT( ResY * ARc / 16) * 16</equation>
 </para>
 
 <para>
@@ -751,6 +713,9 @@
   However, if you have a target size for your movie (1 or 2 CDs for instance),
   there's a limited total number of bits that you can spend; therefore it's
   necessary to find a good tradeoff between compressibility and quality.
+</para>
+
+<para>
   The CQ depends both on the bitrate and the movie resolution.
   In order to raise the CQ, typically you'd downscale the movie given that the
   bitrate is computed in function of the target size and the length of the
@@ -762,7 +727,10 @@
   visible).
   It's therefore wise to take a CQ ranging from 0.20 to 0.22 for a 1 CD rip,
   and  0.26-0.28 for 2 CDs.
-  Please thake note that the CQ is just an indicative figure, as depending on
+</para>
+
+<para>
+  Please take note that the CQ is just an indicative figure, as depending on
   the encoded content, a CQ of 0.18 may look just fine for a Bergman, contrary
   to a movie such as The Matrix, which contains many high-motion scenes.
   On the other hand, it's worthless to raise CQ higher than 0.30 as you'd
@@ -820,8 +788,11 @@
   will encode destination_sound.wav with the encoding quality 1, which is
   roughly equivalent to 80Kb/s, and is the minimum quality at which you
   should encode if you care about quality.
-  Please note that MEncoder currently cannot mux Ogg Vorbis files
-  into a video stream because it can only create AVI and MPEG files.
+  Please note that MEncoder currently cannot mux Vorbis audio tracks
+  into the output file because it only supports AVI and MPEG
+  containers as an output, each of which may lead to audio/video
+  playback synchronization problems with some players when the AVI file
+  contain VBR audio streams such as Vorbis.
   Don't worry, this document will show you how you can do that with third
   party programs.
 </para>
@@ -915,8 +886,8 @@
 
 </sect2>
 
-<sect2 id="menc-feat-dvd-mpeg4-encoding-options">
-<title>Encoding options</title>
+<sect2 id="menc-feat-dvd-mpeg4-lavc-encoding-options">
+<title>Encoding options of libavcodec</title>
 
 <para>
   Ideally, you'd probably want to be able to just tell the encoder to switch
@@ -1299,7 +1270,7 @@
   document are <emphasis role="bold">not</emphasis> intended for
   actual use. They are simply the bare minimum required to encode the
   pertaining video category. How to make good DVD rips or fine-tune
-  <systemitem class="library">libavcodec</systemitem> for maximum
+  <systemitem class="library">libavcodec</systemitem> for maximal
   quality is not within the scope of this document.
   </para></listitem>
 <listitem><para>