Mercurial > mplayer.hg
changeset 28316:da307fb1c239
spelling/grammar cosmetics
author | diego |
---|---|
date | Sun, 25 Jan 2009 11:57:17 +0000 |
parents | 82cf99fc9d2b |
children | 78e355443da9 |
files | libswscale/swscale.c |
diffstat | 1 files changed, 49 insertions(+), 49 deletions(-) [+] |
line wrap: on
line diff
--- a/libswscale/swscale.c Sun Jan 25 11:33:35 2009 +0000 +++ b/libswscale/swscale.c Sun Jan 25 11:57:17 2009 +0000 @@ -46,7 +46,7 @@ YVU9 -> YV12 untested special converters - YV12/I420 -> BGR15/BGR24/BGR32 (it is the yuv2rgb stuff, so it should be ok) + YV12/I420 -> BGR15/BGR24/BGR32 (it is the yuv2rgb stuff, so it should be OK) YV12/I420 -> YV12/I420 YUY2/BGR15/BGR24/BGR32/RGB24/RGB32 -> same format BGR24 -> BGR32 & RGB24 -> RGB32 @@ -89,9 +89,9 @@ //#define WORDS_BIGENDIAN #define DITHER1XBPP -#define FAST_BGR2YV12 // use 7 bit coeffs instead of 15bit - -#define RET 0xC3 //near return opcode for X86 +#define FAST_BGR2YV12 // use 7 bit coefficients instead of 15 bit + +#define RET 0xC3 //near return opcode for x86 #ifdef M_PI #define PI M_PI @@ -194,10 +194,10 @@ TODO more intelligent misalignment avoidance for the horizontal scaler write special vertical cubic upscale version -Optimize C code (yv12 / minmax) -add support for packed pixel yuv input & output +optimize C code (YV12 / minmax) +add support for packed pixel YUV input & output add support for Y8 output -optimize bgr24 & bgr32 +optimize BGR24 & BGR32 add BGR4 output support write special BGR->BGR scaler */ @@ -471,7 +471,7 @@ int16_t *chrFilter, int16_t **chrSrc, int chrFilterSize, uint8_t *dest, uint8_t *uDest, uint8_t *vDest, int dstW, int chrDstW) { - //FIXME Optimize (just quickly writen not opti..) + //FIXME Optimize (just quickly written not optimized..) int i; for (i=0; i<dstW; i++) { @@ -504,7 +504,7 @@ int16_t *chrFilter, int16_t **chrSrc, int chrFilterSize, uint8_t *dest, uint8_t *uDest, int dstW, int chrDstW, int dstFormat) { - //FIXME Optimize (just quickly writen not opti..) + //FIXME Optimize (just quickly written not optimized..) int i; for (i=0; i<dstW; i++) { @@ -653,7 +653,7 @@ } #define YSCALE_YUV_2_RGBX_C(type) \ - YSCALE_YUV_2_PACKEDX_C(type) /* FIXME fix tables so that cliping is not needed and then use _NOCLIP*/\ + YSCALE_YUV_2_PACKEDX_C(type) /* FIXME fix tables so that clipping is not needed and then use _NOCLIP*/\ r = (type *)c->table_rV[V]; \ g = (type *)(c->table_gU[U] + c->table_gV[V]); \ b = (type *)c->table_bU[U]; \ @@ -953,7 +953,7 @@ } } -//Note: we have C, X86, MMX, MMX2, 3DNOW version therse no 3DNOW+MMX2 one +//Note: we have C, X86, MMX, MMX2, 3DNOW versions, there is no 3DNOW+MMX2 one //Plain C versions #if !HAVE_MMX || defined (RUNTIME_CPUDETECT) || !CONFIG_GPL #define COMPILE_C @@ -1004,7 +1004,7 @@ #if ARCH_X86 -//X86 versions +//x86 versions /* #undef RENAME #undef HAVE_MMX @@ -1055,7 +1055,7 @@ #endif //ARCH_X86 -// minor note: the HAVE_xyz is messed up after that line so don't use it +// minor note: the HAVE_xyz are messed up after this line so don't use them static double getSplineCoeff(double a, double b, double c, double d, double dist) { @@ -1085,7 +1085,7 @@ __asm__ volatile("emms\n\t"::: "memory"); //FIXME this should not be required but it IS (even for non-MMX versions) #endif - // Note the +1 is for the MMXscaler which reads over the end + // NOTE: the +1 is for the MMX scaler which reads over the end *filterPos = av_malloc((dstW+1)*sizeof(int16_t)); if (FFABS(xInc - 0x10000) <10) // unscaled @@ -1134,7 +1134,7 @@ int j; (*filterPos)[i]= xx; - //Bilinear upscale / linear interpolate / Area averaging + //bilinear upscale / linear interpolate / area averaging for (j=0; j<filterSize; j++) { int64_t coeff= fone - FFABS((xx<<16) - xDstInSrc)*(fone>>16); @@ -1315,7 +1315,7 @@ /* preserve monotonicity because the core can't handle the filter otherwise */ if (i<dstW-1 && (*filterPos)[i] >= (*filterPos)[i+1]) break; - // Move filter coeffs left + // move filter coefficients left for (k=1; k<filter2Size; k++) filter2[i*filter2Size + k - 1]= filter2[i*filter2Size + k]; filter2[i*filter2Size + k - 1]= 0; @@ -1341,10 +1341,10 @@ if (minFilterSize < 5) filterAlign = 4; - // we really don't want to waste our time - // doing useless computation, so fall-back on - // the scalar C code for very small filter. - // vectorizing is worth it only if you have + // We really don't want to waste our time + // doing useless computation, so fall back on + // the scalar C code for very small filters. + // Vectorizing is worth it only if you have a // decent-sized vector. if (minFilterSize < 3) filterAlign = 1; @@ -1381,7 +1381,7 @@ } - //FIXME try to align filterpos if possible + //FIXME try to align filterPos if possible //fix borders for (i=0; i<dstW; i++) @@ -1389,7 +1389,7 @@ int j; if ((*filterPos)[i] < 0) { - // Move filter coeffs left to compensate for filterPos + // move filter coefficients left to compensate for filterPos for (j=1; j<filterSize; j++) { int left= FFMAX(j + (*filterPos)[i], 0); @@ -1402,7 +1402,7 @@ if ((*filterPos)[i] + filterSize > srcW) { int shift= (*filterPos)[i] + filterSize - srcW; - // Move filter coeffs right to compensate for filterPos + // move filter coefficients right to compensate for filterPos for (j=filterSize-2; j>=0; j--) { int right= FFMIN(j + shift, filterSize-1); @@ -1413,11 +1413,11 @@ } } - // Note the +1 is for the MMXscaler which reads over the end + // Note the +1 is for the MMX scaler which reads over the end /* align at 16 for AltiVec (needed by hScale_altivec_real) */ *outFilter= av_mallocz(*outFilterSize*(dstW+1)*sizeof(int16_t)); - /* Normalize & Store in outFilter */ + /* normalize & store in outFilter */ for (i=0; i<dstW; i++) { int j; @@ -2075,7 +2075,7 @@ } /** - * @param inv_table the yuv2rgb coeffs, normally Inverse_Table_6_9[x] + * @param inv_table the yuv2rgb coefficients, normally Inverse_Table_6_9[x] * @param fullRange if 1 then the luma range is 0..255 if 0 it is 16..235 * @return -1 if not supported */ @@ -2242,7 +2242,7 @@ |SWS_BICUBLIN); if(!i || (i & (i-1))) { - av_log(NULL, AV_LOG_ERROR, "swScaler: Exactly one scaler algorithm must be choosen\n"); + av_log(NULL, AV_LOG_ERROR, "swScaler: Exactly one scaler algorithm must be chosen\n"); return NULL; } @@ -2254,7 +2254,7 @@ return NULL; } if(srcW > VOFW || dstW > VOFW){ - av_log(NULL, AV_LOG_ERROR, "swScaler: Compile time max width is "AV_STRINGIFY(VOFW)" change VOF/VOFW and recompile\n"); + av_log(NULL, AV_LOG_ERROR, "swScaler: Compile-time maximum width is "AV_STRINGIFY(VOFW)" change VOF/VOFW and recompile\n"); return NULL; } @@ -2288,14 +2288,14 @@ getSubSampleFactors(&c->chrSrcHSubSample, &c->chrSrcVSubSample, srcFormat); getSubSampleFactors(&c->chrDstHSubSample, &c->chrDstVSubSample, dstFormat); - // reuse chroma for 2 pixles rgb/bgr unless user wants full chroma interpolation + // reuse chroma for 2 pixels RGB/BGR unless user wants full chroma interpolation if ((isBGR(dstFormat) || isRGB(dstFormat)) && !(flags&SWS_FULL_CHR_H_INT)) c->chrDstHSubSample=1; // drop some chroma lines if the user wants it c->vChrDrop= (flags&SWS_SRC_V_CHR_DROP_MASK)>>SWS_SRC_V_CHR_DROP_SHIFT; c->chrSrcVSubSample+= c->vChrDrop; - // drop every 2. pixel for chroma calculation unless user wants full chroma + // drop every other pixel for chroma calculation unless user wants full chroma if ((isBGR(srcFormat) || isRGB(srcFormat)) && !(flags&SWS_FULL_CHR_H_INP) && srcFormat!=PIX_FMT_RGB8 && srcFormat!=PIX_FMT_BGR8 && srcFormat!=PIX_FMT_RGB4 && srcFormat!=PIX_FMT_BGR4 @@ -2322,7 +2322,7 @@ sws_setColorspaceDetails(c, Inverse_Table_6_9[SWS_CS_DEFAULT], srcRange, Inverse_Table_6_9[SWS_CS_DEFAULT] /* FIXME*/, dstRange, 0, 1<<16, 1<<16); - /* unscaled special Cases */ + /* unscaled special cases */ if (unscaled && !usesHFilter && !usesVFilter && (srcRange == dstRange || isBGR(dstFormat) || isRGB(dstFormat))) { /* yv12_to_nv12 */ @@ -2348,7 +2348,7 @@ if (srcFormat==PIX_FMT_BGR24 && dstFormat==PIX_FMT_YUV420P && !(flags & SWS_ACCURATE_RND)) c->swScale= bgr24toyv12Wrapper; - /* rgb/bgr -> rgb/bgr (no dither needed forms) */ + /* RGB/BGR -> RGB/BGR (no dither needed forms) */ if ( (isBGR(srcFormat) || isRGB(srcFormat)) && (isBGR(dstFormat) || isRGB(dstFormat)) && srcFormat != PIX_FMT_BGR8 && dstFormat != PIX_FMT_BGR8 @@ -2448,7 +2448,7 @@ if (!c->canMMX2BeUsed && dstW >=srcW && (srcW&15)==0 && (flags&SWS_FAST_BILINEAR)) { if (flags&SWS_PRINT_INFO) - av_log(c, AV_LOG_INFO, "output Width is not a multiple of 32 -> no MMX2 scaler\n"); + av_log(c, AV_LOG_INFO, "output width is not a multiple of 32 -> no MMX2 scaler\n"); } if (usesHFilter) c->canMMX2BeUsed=0; } @@ -2471,7 +2471,7 @@ c->lumXInc+= 20; c->chrXInc+= 20; } - //we don't use the x86asm scaler if mmx is available + //we don't use the x86 asm scaler if MMX is available else if (flags & SWS_CPU_CAPS_MMX) { c->lumXInc = ((srcW-2)<<16)/(dstW-2) - 20; @@ -2517,7 +2517,7 @@ initMMX2HScaler(c->chrDstW, c->chrXInc, c->funnyUVCode, c->chrMmx2Filter, c->chrMmx2FilterPos, 4); } #endif /* defined(COMPILE_MMX2) */ - } // Init Horizontal stuff + } // initialize horizontal stuff @@ -2557,7 +2557,7 @@ #endif } - // Calculate Buffer Sizes so that they won't run out while handling these damn slices + // calculate buffer sizes so that they won't run out while handling these damn slices c->vLumBufSize= c->vLumFilterSize; c->vChrBufSize= c->vChrFilterSize; for (i=0; i<dstH; i++) @@ -2577,7 +2577,7 @@ // allocate pixbufs (we use dynamic allocation because otherwise we would need to c->lumPixBuf= av_malloc(c->vLumBufSize*2*sizeof(int16_t*)); c->chrPixBuf= av_malloc(c->vChrBufSize*2*sizeof(int16_t*)); - //Note we need at least one pixel more at the end because of the mmx code (just in case someone wanna replace the 4000/8000) + //Note we need at least one pixel more at the end because of the MMX code (just in case someone wanna replace the 4000/8000) /* align at 16 bytes for AltiVec */ for (i=0; i<c->vLumBufSize; i++) c->lumPixBuf[i]= c->lumPixBuf[i+c->vLumBufSize]= av_mallocz(VOF+1); @@ -2668,7 +2668,7 @@ else { #if ARCH_X86 - av_log(c, AV_LOG_VERBOSE, "using X86-Asm scaler for horizontal scaling\n"); + av_log(c, AV_LOG_VERBOSE, "using x86 asm scaler for horizontal scaling\n"); #else if (flags & SWS_FAST_BILINEAR) av_log(c, AV_LOG_VERBOSE, "using FAST_BILINEAR C scaler for horizontal scaling\n"); @@ -2695,22 +2695,22 @@ } if (dstFormat==PIX_FMT_BGR24) - av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR24 Converter\n", + av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR24 converter\n", (flags & SWS_CPU_CAPS_MMX2) ? "MMX2" : ((flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C")); else if (dstFormat==PIX_FMT_RGB32) - av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR32 Converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"); + av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR32 converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"); else if (dstFormat==PIX_FMT_BGR565) - av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR16 Converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"); + av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR16 converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"); else if (dstFormat==PIX_FMT_BGR555) - av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR15 Converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"); + av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR15 converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"); av_log(c, AV_LOG_VERBOSE, "%dx%d -> %dx%d\n", srcW, srcH, dstW, dstH); } if (flags & SWS_PRINT_INFO) { - av_log(c, AV_LOG_DEBUG, "Lum srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n", + av_log(c, AV_LOG_DEBUG, "lum srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n", c->srcW, c->srcH, c->dstW, c->dstH, c->lumXInc, c->lumYInc); - av_log(c, AV_LOG_DEBUG, "Chr srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n", + av_log(c, AV_LOG_DEBUG, "chr srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n", c->chrSrcW, c->chrSrcH, c->chrDstW, c->chrDstH, c->chrXInc, c->chrYInc); } @@ -2720,7 +2720,7 @@ /** * swscale wrapper, so we don't need to export the SwsContext. - * assumes planar YUV to be in YUV order instead of YVU + * Assumes planar YUV to be in YUV order instead of YVU. */ int sws_scale(SwsContext *c, uint8_t* src[], int srcStride[], int srcSliceY, int srcSliceH, uint8_t* dst[], int dstStride[]){ @@ -2820,7 +2820,7 @@ } /** - * swscale wrapper, so we don't need to export the SwsContext + * swscale wrapper, so we don't need to export the SwsContext. */ int sws_scale_ordered(SwsContext *c, uint8_t* src[], int srcStride[], int srcSliceY, int srcSliceH, uint8_t* dst[], int dstStride[]){ @@ -2886,8 +2886,8 @@ } /** - * returns a normalized gaussian curve used to filter stuff - * quality=3 is high quality, lowwer is lowwer quality + * Returns a normalized Gaussian curve used to filter stuff + * quality=3 is high quality, lower is lower quality. */ SwsVector *sws_getGaussianVec(double variance, double quality){ const int length= (int)(variance*quality + 0.5) | 1; @@ -3168,7 +3168,7 @@ /** * Checks if context is valid or reallocs a new one instead. * If context is NULL, just calls sws_getContext() to get a new one. - * Otherwise, checks if the parameters are the same already saved in context. + * Otherwise, checks if the parameters are the ones already saved in context. * If that is the case, returns the current context. * Otherwise, frees context and gets a new one. *