annotate acinclude.m4 @ 15051:f0ffd80aa196

[gaim-migrate @ 17834] I don't think these parameters are allowed to be null... it looks like it can cause crashes. See Red Hat bug #217335. Thanks to Nalin Dahyabhai for pin pointing the cause of the crash. http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=217335 committer: Tailor Script <[e-mail]>

dnl Added by setup-gettext. Do not remove this
dnl unless you know what you are doing.
AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])

# Configure paths for GLIB
# Owen Taylor     1997-2001

dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or 
dnl gthread is specified in MODULES, pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GLIB_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
		    , enable_glibtest=yes)

  pkg_config_args=glib-2.0
  for module in . $4
  do
      case "$module" in
         gmodule) 
             pkg_config_args="$pkg_config_args gmodule-2.0"
         ;;
         gobject) 
             pkg_config_args="$pkg_config_args gobject-2.0"
         ;;
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  no_glib=""

  if test x$PKG_CONFIG != xno ; then
    if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo *** pkg-config too old; version 0.7 or better required.
      no_glib=yes
      PKG_CONFIG=no
    fi
  else
    no_glib=yes
  fi

  min_glib_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
	  enable_glibtest=no
    fi

    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
	  :
    else
	  no_glib=yes
    fi
  fi

  if test x"$no_glib" = x ; then
    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`

    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.glibtest
      AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          ac_save_CFLAGS="$CFLAGS"
          ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     GLIB_GENMARSHAL=""
     GOBJECT_QUERY=""
     GLIB_MKENUMS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GLIB_CFLAGS)
  AC_SUBST(GLIB_LIBS)
  AC_SUBST(GLIB_GENMARSHAL)
  AC_SUBST(GOBJECT_QUERY)
  AC_SUBST(GLIB_MKENUMS)
  rm -f conf.glibtest
])
# Configure paths for GTK+
# Owen Taylor     1997-2001

dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, 
dnl pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GTK_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run a test GTK+ program],
		    , enable_gtktest=yes)

  pkg_config_args=gtk+-2.0
  for module in . $4
  do
      case "$module" in
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  no_gtk=""

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  if test x$PKG_CONFIG != xno ; then
    if pkg-config --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo *** pkg-config too old; version 0.7 or better required.
      no_gtk=yes
      PKG_CONFIG=no
    fi
  else
    no_gtk=yes
  fi

  min_gtk_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
	  enable_gtktest=no
    fi

    if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
	  :
    else
	  no_gtk=yes
    fi
  fi

  if test x"$no_gtk" = x ; then
    GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
    GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.gtktest
      AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://pkgconfig.sourceforge.net"
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK+ test program, checking why..."
	  ac_save_CFLAGS="$CFLAGS"
	  ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
          echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])

dnl ac_var_timeszone_externals.m4

# Define 'timezone', 'altzone' and 'daylight'
# http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html
# Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the
# the external timezone variables 'timezone', 'altzone' and 'daylight' exist,
# defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively
# (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE').
# Mark R.Bannister <[e-mail]>
AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS],
[  AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl
   AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone,
   [  AC_TRY_LINK([#include <time.h>], [return (int)timezone;],
         mb_cv_var_timezone=yes,
         mb_cv_var_timezone=no)
   ])
   AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone,
   [  AC_TRY_LINK([#include <time.h>], [return (int)altzone;],
         mb_cv_var_altzone=yes,
         mb_cv_var_altzone=no)
   ])
   AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight,
   [  AC_TRY_LINK([#include <time.h>], [return (int)daylight;],
         mb_cv_var_daylight=yes,
         mb_cv_var_daylight=no)
   ])
   if test $mb_cv_var_timezone = yes; then
      AC_DEFINE([HAVE_TIMEZONE], 1,
              [Define if you have the external 'timezone' variable.])
   fi
   if test $mb_cv_var_altzone = yes; then
      AC_DEFINE([HAVE_ALTZONE], 1,
              [Define if you have the external 'altzone' variable.])
   fi
   if test $mb_cv_var_daylight = yes; then
      AC_DEFINE([HAVE_DAYLIGHT], 1,
              [Define if you have the external 'daylight' variable.])
   fi
])

dnl Available from the GNU Autoconf Macro Archive at:
dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html
dnl
AC_DEFUN([AC_PROG_PERL_MODULES],[dnl
ac_perl_modules="$1"
# Make sure we have perl
if test -z "$PERL"; then
AC_CHECK_PROG(PERL,perl,perl)
fi

if test "x$PERL" != x; then
  ac_perl_modules_failed=0
  for ac_perl_module in $ac_perl_modules; do
    AC_MSG_CHECKING(for perl module $ac_perl_module)

    # Would be nice to log result here, but can't rely on autoconf internals
    $PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1
    if test $? -ne 0; then
      AC_MSG_RESULT(no);
      ac_perl_modules_failed=1
   else
      AC_MSG_RESULT(ok);
    fi
  done

  # Run optional shell commands
  if test "$ac_perl_modules_failed" = 0; then
    :
    $2
  else
    :
    $3
  fi
else
  AC_MSG_WARN(could not find perl)
fi])dnl


dnl This file scares me...
# Check for binary relocation support
# Hongli Lai
# http://autopackage.org/

AC_DEFUN([AM_BINRELOC],
[
	AC_ARG_ENABLE(binreloc,
		[  --enable-binreloc       compile with binary relocation support
                          (default=enable when available)],
		enable_binreloc=$enableval,enable_binreloc=auto)

	BINRELOC_CFLAGS=
	BINRELOC_LIBS=
	if test "x$enable_binreloc" = "xauto"; then
		AC_CACHE_CHECK([whether everything is installed to the same prefix],
			       [br_cv_valid_prefixes], [
				if test "$bindir" = '${exec_prefix}/bin' -a "$sbindir" = '${exec_prefix}/sbin' -a \
					"$datadir" = '${prefix}/share' -a "$libdir" = '${exec_prefix}/lib' -a \
					"$libexecdir" = '${exec_prefix}/libexec' -a "$sysconfdir" = '${prefix}/etc'
				then
					br_cv_valid_prefixes=yes
				else
					br_cv_valid_prefixes=no
				fi
				])
	fi
	AC_CACHE_CHECK([whether binary relocation support should be enabled],
		       [br_cv_binreloc],
		       [if test "x$enable_binreloc" = "xyes"; then
		       	       br_cv_binreloc=yes
		       elif test "x$enable_binreloc" = "xauto"; then
			       if test "x$br_cv_valid_prefixes" = "xyes"; then
				       br_cv_binreloc=yes
			       else
				       br_cv_binreloc=no
			       fi
		       else
			       br_cv_binreloc=no
		       fi])

	if test "x$br_cv_binreloc" = "xyes"; then
		BINRELOC_CFLAGS="-DENABLE_BINRELOC"
		AC_DEFINE(ENABLE_BINRELOC,,[Use binary relocation?])
	fi
	AC_SUBST(BINRELOC_CFLAGS)
	AC_SUBST(BINRELOC_LIBS)
])
dnl AM_GCONF_SOURCE_2
dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas
dnl  (i.e. pass to gconftool-2
dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where
dnl  you should install foo.schemas files
dnl

AC_DEFUN([AM_GCONF_SOURCE_2],
[
  if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then
    GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source`
  else
    GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE
  fi

  AC_ARG_WITH(gconf-source, 
  [  --with-gconf-source=sourceaddress      Config database for installing schema files.],GCONF_SCHEMA_CONFIG_SOURCE="$withval",)

  AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE)
  AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation])

  if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then
    GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas'
  fi

  AC_ARG_WITH(gconf-schema-file-dir, 
  [  --with-gconf-schema-file-dir=dir        Directory for installing schema files.],GCONF_SCHEMA_FILE_DIR="$withval",)

  AC_SUBST(GCONF_SCHEMA_FILE_DIR)
  AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files])

  AC_ARG_ENABLE(schemas-install,
     [  --disable-schemas-install	Disable the schemas installation],
     [case ${enableval} in
       yes|no) ;;
       *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;;
      esac])
  AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no])
])