Mercurial > pidgin.yaz
view acinclude.m4 @ 14760:3d1be4577fa9
[gaim-migrate @ 17517]
Patch from Richard Nelson (wabz). This is not necessary right now, but it's
probably going to be necessary for workspaces (wabz is doing a WM for that).
committer: Tailor Script <tailor@pidgin.im>
| author | Sadrul Habib Chowdhury <imadil@gmail.com> |
|---|---|
| date | Wed, 18 Oct 2006 04:39:59 +0000 |
| parents | 9a989acb0601 |
| children | 0d4a41a50168 |
line wrap: on
line source
dnl Added by setup-gettext. Do not remove this dnl unless you know what you are doing. AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) # Configure paths for GLIB # Owen Taylor 1997-2001 dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or dnl gthread is specified in MODULES, pass to pkg-config dnl AC_DEFUN([AM_PATH_GLIB_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], , enable_glibtest=yes) pkg_config_args=glib-2.0 for module in . $4 do case "$module" in gmodule) pkg_config_args="$pkg_config_args gmodule-2.0" ;; gobject) pkg_config_args="$pkg_config_args gobject-2.0" ;; gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done AC_PATH_PROG(PKG_CONFIG, pkg-config, no) no_glib="" if test x$PKG_CONFIG != xno ; then if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_glib=yes PKG_CONFIG=no fi else no_glib=yes fi min_glib_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" enable_glibtest=no fi if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then : else no_glib=yes fi fi if test x"$no_glib" = x ; then GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" dnl dnl Now check if the installed GLIB is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.glibtest AC_TRY_RUN([ #include <glib.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://www.freedesktop.org/software/pkgconfig/" else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" AC_TRY_LINK([ #include <glib.h> #include <stdio.h> ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" GLIB_GENMARSHAL="" GOBJECT_QUERY="" GLIB_MKENUMS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) AC_SUBST(GLIB_GENMARSHAL) AC_SUBST(GOBJECT_QUERY) AC_SUBST(GLIB_MKENUMS) rm -f conf.glibtest ]) # Configure paths for GTK+ # Owen Taylor 1997-2001 dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, dnl pass to pkg-config dnl AC_DEFUN([AM_PATH_GTK_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], , enable_gtktest=yes) pkg_config_args=gtk+-2.0 for module in . $4 do case "$module" in gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done no_gtk="" AC_PATH_PROG(PKG_CONFIG, pkg-config, no) if test x$PKG_CONFIG != xno ; then if pkg-config --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_gtk=yes PKG_CONFIG=no fi else no_gtk=yes fi min_gtk_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" enable_gtktest=no fi if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then : else no_gtk=yes fi fi if test x"$no_gtk" = x ; then GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK+ is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.gtktest AC_TRY_RUN([ #include <gtk/gtk.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else echo "*** Could not run GTK+ test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include <gtk/gtk.h> #include <stdio.h> ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK+ or finding the wrong" echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) dnl ac_var_timeszone_externals.m4 # Define 'timezone', 'altzone' and 'daylight' # http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html # Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the # the external timezone variables 'timezone', 'altzone' and 'daylight' exist, # defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively # (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE'). # Mark R.Bannister <markb@freedomware.co.uk> AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS], [ AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone, [ AC_TRY_LINK([#include <time.h>], [return (int)timezone;], mb_cv_var_timezone=yes, mb_cv_var_timezone=no) ]) AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone, [ AC_TRY_LINK([#include <time.h>], [return (int)altzone;], mb_cv_var_altzone=yes, mb_cv_var_altzone=no) ]) AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight, [ AC_TRY_LINK([#include <time.h>], [return (int)daylight;], mb_cv_var_daylight=yes, mb_cv_var_daylight=no) ]) if test $mb_cv_var_timezone = yes; then AC_DEFINE([HAVE_TIMEZONE], 1, [Define if you have the external 'timezone' variable.]) fi if test $mb_cv_var_altzone = yes; then AC_DEFINE([HAVE_ALTZONE], 1, [Define if you have the external 'altzone' variable.]) fi if test $mb_cv_var_daylight = yes; then AC_DEFINE([HAVE_DAYLIGHT], 1, [Define if you have the external 'daylight' variable.]) fi ]) dnl Available from the GNU Autoconf Macro Archive at: dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html dnl AC_DEFUN([AC_PROG_PERL_MODULES],[dnl ac_perl_modules="$1" # Make sure we have perl if test -z "$PERL"; then AC_CHECK_PROG(PERL,perl,perl) fi if test "x$PERL" != x; then ac_perl_modules_failed=0 for ac_perl_module in $ac_perl_modules; do AC_MSG_CHECKING(for perl module $ac_perl_module) # Would be nice to log result here, but can't rely on autoconf internals $PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_RESULT(no); ac_perl_modules_failed=1 else AC_MSG_RESULT(ok); fi done # Run optional shell commands if test "$ac_perl_modules_failed" = 0; then : $2 else : $3 fi else AC_MSG_WARN(could not find perl) fi])dnl dnl This file scares me... # Check for binary relocation support # Hongli Lai # http://autopackage.org/ AC_DEFUN([AM_BINRELOC], [ AC_ARG_ENABLE(binreloc, [ --enable-binreloc compile with binary relocation support (default=enable when available)], enable_binreloc=$enableval,enable_binreloc=auto) BINRELOC_CFLAGS= BINRELOC_LIBS= if test "x$enable_binreloc" = "xauto"; then AC_CACHE_CHECK([whether everything is installed to the same prefix], [br_cv_valid_prefixes], [ if test "$bindir" = '${exec_prefix}/bin' -a "$sbindir" = '${exec_prefix}/sbin' -a \ "$datadir" = '${prefix}/share' -a "$libdir" = '${exec_prefix}/lib' -a \ "$libexecdir" = '${exec_prefix}/libexec' -a "$sysconfdir" = '${prefix}/etc' then br_cv_valid_prefixes=yes else br_cv_valid_prefixes=no fi ]) fi AC_CACHE_CHECK([whether binary relocation support should be enabled], [br_cv_binreloc], [if test "x$enable_binreloc" = "xyes"; then br_cv_binreloc=yes elif test "x$enable_binreloc" = "xauto"; then if test "x$br_cv_valid_prefixes" = "xyes"; then br_cv_binreloc=yes else br_cv_binreloc=no fi else br_cv_binreloc=no fi]) if test "x$br_cv_binreloc" = "xyes"; then BINRELOC_CFLAGS="-DENABLE_BINRELOC" AC_DEFINE(ENABLE_BINRELOC,,[Use binary relocation?]) fi AC_SUBST(BINRELOC_CFLAGS) AC_SUBST(BINRELOC_LIBS) ]) dnl AM_GCONF_SOURCE_2 dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas dnl (i.e. pass to gconftool-2 dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where dnl you should install foo.schemas files dnl AC_DEFUN([AM_GCONF_SOURCE_2], [ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` else GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE fi AC_ARG_WITH(gconf-source, [ --with-gconf-source=sourceaddress Config database for installing schema files.],GCONF_SCHEMA_CONFIG_SOURCE="$withval",) AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' fi AC_ARG_WITH(gconf-schema-file-dir, [ --with-gconf-schema-file-dir=dir Directory for installing schema files.],GCONF_SCHEMA_FILE_DIR="$withval",) AC_SUBST(GCONF_SCHEMA_FILE_DIR) AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) AC_ARG_ENABLE(schemas-install, [ --disable-schemas-install Disable the schemas installation], [case ${enableval} in yes|no) ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; esac]) AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ])