Mercurial > pidgin.yaz
view m4/esd.m4 @ 1106:5bc8fdacd2cb
[gaim-migrate @ 1116]
lots of changes.
buddy.c: just in general tried to get things to work better. moving things in the edit list window and signing off should be handled better in the main buddy list window (watch out for flashes).
gaim.h: removed toc-specific things and moved them to toc.c and rvous.c as needed.
gtkhtml.c: possible fix for AOL 6.0 problems (I wasn't able to reproduce the problem before or after the fix, but i fixed what i think might have been causing the problem).
multi.c: moved LOGIN_STEPS from gaim.h here and actually use it now
oscar.c: moved an oscar-specific struct definition from gaim.h here and also handle problems better
perl.c: fix for stupid problem
rvous.c: first pass at attempt to be able to remove toc.c and rvous.c (though this will never happen; gaim will support toc as long as aol does) without cruft. gaim is now only dependent on toc.c and rvous.c for toc_build_config and parse_toc_buddy_list, which gaim needs to save and read its buddy list.
toc.c: rewrote the signin process so that the read()'s won't block. it's not actually a non-blocking read; it's just that it won't ever get to the read until there's data to be read (thanks to the gdk_input watcher). this means the cancel button should work after it's connected, but it's still not a non-blocking connect.
committer: Tailor Script <tailor@pidgin.im>
author | Eric Warmenhoven <eric@warmenhoven.org> |
---|---|
date | Mon, 20 Nov 2000 07:24:18 +0000 |
parents | 68b230f8da5f |
children |
line wrap: on
line source
# Configure paths for ESD # Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_GESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS dnl AC_DEFUN(AM_PATH_GESD, [dnl dnl Get the cflags and libraries from the esd-config script dnl AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], esd_prefix="$withval", esd_prefix="") AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], esd_exec_prefix="$withval", esd_exec_prefix="") AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], , enable_esdtest=yes) if test x$esd_exec_prefix != x ; then esd_args="$esd_args --exec-prefix=$esd_exec_prefix" if test x${ESD_CONFIG+set} != xset ; then ESD_CONFIG=$esd_exec_prefix/bin/esd-config fi fi if test x$esd_prefix != x ; then esd_args="$esd_args --prefix=$esd_prefix" if test x${ESD_CONFIG+set} != xset ; then ESD_CONFIG=$esd_prefix/bin/esd-config fi fi AC_PATH_PROG(ESD_CONFIG, esd-config, no) min_esd_version=ifelse([$1], ,0.2.7,$1) AC_MSG_CHECKING(for ESD - version >= $min_esd_version) no_esd="" if test "$ESD_CONFIG" = "no" ; then no_esd=yes else ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` esd_major_version=`$ESD_CONFIG $esd_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` esd_minor_version=`$ESD_CONFIG $esd_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_esdtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $ESD_CFLAGS" LIBS="$LIBS $ESD_LIBS" dnl dnl Now check if the installed ESD is sufficiently new. (Also sanity dnl checks the results of esd-config to some extent dnl rm -f conf.esdtest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <esd.h> char* my_strdup (char *str) { char *new_str; if (str) { new_str = malloc ((strlen (str) + 1) * sizeof(char)); strcpy (new_str, str); } else new_str = NULL; return new_str; } int main () { int major, minor, micro; char *tmp_version; system ("touch conf.esdtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = my_strdup("$min_esd_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_esd_version"); exit(1); } if (($esd_major_version > major) || (($esd_major_version == major) && ($esd_minor_version > minor)) || (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) { return 0; } else { printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); printf("*** to point to the correct copy of esd-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_esd" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$ESD_CONFIG" = "no" ; then echo "*** The esd-config script installed by ESD could not be found" echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the ESD_CONFIG environment variable to the" echo "*** full path to esd-config." else if test -f conf.esdtest ; then : else echo "*** Could not run ESD test program, checking why..." CFLAGS="$CFLAGS $ESD_CFLAGS" LIBS="$LIBS $ESD_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <esd.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding ESD or finding the wrong" echo "*** version of ESD. If it is not finding ESD, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means ESD was incorrectly installed" echo "*** or that you have moved ESD since it was installed. In the latter case, you" echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi ESD_CFLAGS="" ESD_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(ESD_CFLAGS) AC_SUBST(ESD_LIBS) rm -f conf.esdtest ])