view setup-gettext @ 12116:e75ef7aa913e

[gaim-migrate @ 14416] " This patch implements a replacement for the queuing system from 1.x. It also obsoletes a previous patch [#1338873] I submitted to prioritize the unseen states in gtk conversations. The attached envelope.png is ripped from the msgunread.png already included in gaim. It should be dropped in the pixmaps directory (Makefile.am is updated accordingly in this patch). The two separate queuing preferences from 1.x, queuing messages while away and queuing all new messages (from docklet), are replaced with a single 3-way preference for conversations. The new preference is "Hide new IM conversations". This preference can be set to never, away and always. When a gtk conversation is created, it may be placed in a hidden conversation window instead of being placed normally. This decision is based upon the preference and possibly the away state of the account the conversation is being created for. This *will* effect conversations the user explicitly requests to be created, so in these cases the caller must be sure to present the conversation to the user, using gaim_gtkconv_present_conversation(). This is done already in gtkdialogs.c which handles creating conversations requested by the user from gaim proper (menus, double-clicking on budy in blist, etc.). The main advantage to not queuing messages is that the conversations exist, the message is written to the conversation (and logged if appropriate) and the unseen state is set on the conversation. This means no additional features are needed to track whether there are queued messages or not, just use the unseen state on conversations. Since conversations may not be visible (messages "queued"), gaim proper needs some notification that there are messages waiting. I opted for a menutray icon that shows up when an im conversation has an unseen message. Clicking this icon will focus (and show if hidden) the first conversation with an unseen message. This is essentially the same behavior of the docklet in cvs right now, except that the icon is only visible when there is a conversation with an unread message. The api that is added is flexible enough to allow either the docklet or the new blist menutray icon to be visible for conversations of any/all types and for unseen messages >= any state. Currently they are set to only IM conversations and only unseen states >= TEXT (system messages and no log messages will not trigger blinking the docklet or showing the blist tray icon), but these could be made preferences relatively easily in the future. Other plugins could probably benefit as well: gaim_gtk_conversations_get_first_unseen(). There is probably some limit to comment size, so I'll stop rambling now. If anyone has more questions/comments, catch me in #gaim, here or on gaim-devel." committer: Tailor Script <tailor@pidgin.im>
author Luke Schierer <lschiere@pidgin.im>
date Wed, 16 Nov 2005 18:17:01 +0000
parents a09a5d64f33f
children 8ed35c29007f
line wrap: on
line source

#!/bin/sh
#
# setup-gettext - Provides compatibility with versions of gettext
#                 from the 0.10.x, 0.11.x, and 0.12.x series.
#
# Copyright (C) 2002 Christian Hammond.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public
# License along with this program; if not, write to the Free
# Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA  02111-1307  USA
#

VERSION=0.1.6

VERBOSE=0

parse_gettext_version() {
	GETTEXT_VERSION=`$GETTEXT_TOOL --version | sed -n 's/^.*\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*$/\1.\2.\3/p'`
	test -z "$GETTEXT_VERSION" && GETTEXT_VERSION=`$GETTEXT_TOOL --version | sed -n 's/^.*\([0-9]\+\)\.\([0-9]\+\).*$/\1.\2/p'`
	GETTEXT_MAJOR_VERSION=`echo $GETTEXT_VERSION | cut -d. -f1`
	GETTEXT_MINOR_VERSION=`echo $GETTEXT_VERSION | cut -d. -f2`
	GETTEXT_MICRO_VERSION=`echo $GETTEXT_VERSION | cut -d. -f3`
}

find_gettext() {
	GETTEXT_TOOL=autopoint

	(autopoint --version) < /dev/null > /dev/null 2>&1 || {
		GETTEXT_TOOL=gettextize

		(gettextize --version) < /dev/null > /dev/null 2>&1 || {
			GETTEXT_TOOL=
		}
	}
}

install() {
	[ -f configure.in ] && {
		cp configure.in .tmp-configure.in
		sed -e 's/^AM_GNU_GETTEXT\(.*\)$/AM_GNU_GETTEXT\1\
AM_GNU_GETTEXT_VERSION(0.10.40)/' < .tmp-configure.in > configure.in
		rm .tmp-configure.in
	}

	[ -f configure.ac ] && {
		cp configure.ac .tmp-configure.ac
		sed -e 's/^AM_GNU_GETTEXT\(.*\)$/AM_GNU_GETTEXT\1\
AM_GNU_GETTEXT_VERSION(0.10.40)/' < .tmp-configure.ac > configure.ac
		rm .tmp-configure.ac
	}

	[ -f autogen.sh ] && {
		cp autogen.sh .tmp-autogen.sh
		sed -e 's/\(gettextize\|autopoint\) --version/.\/setup-gettext --gettext-tool/1' -e 's/^\(echo.*|[\t ]*\)\?\(gettextize\|autopoint\) -.*$/.\/setup-gettext/1' < .tmp-autogen.sh > autogen.sh
		rm .tmp-autogen.sh
	}

	echo 'dnl Added by setup-gettext. Do not remove this' >> acinclude.m4
	echo 'dnl unless you know what you are doing.' >> acinclude.m4
	echo 'AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])' >> acinclude.m4
}

backup_m4() {
	[ -d m4 ] && mv m4 m4~
}

restore_m4() {
	[ -d m4~ ] && {
		rm -rf m4
		mv m4~ m4
	}
}

restore_files() {
	[ -f configure.in~ ] && mv -f configure.in~ configure.in
	[ -f configure.ac~ ] && mv -f configure.ac~ configure.ac
	[ -f Makefile.am~ ]  && mv -f Makefile.am~  Makefile.am
}

abort() {
	restore_files
	restore_m4

	exit 1
}

# Main code

find_gettext

# See if a version of gettext and its tools are installed.
if test x$GETTEXT_TOOL = x; then
	echo
	echo "You do not have a version of gettext installed."
	echo "Please download one from your local package repository or"
	echo "from ftp://ftp.gnu.org/pub/gnu/gettext/"
	echo
	exit 1
fi

parse_gettext_version

NUMVAR=$#

if test $NUMVAR -gt 0; then
	if test $NUMVAR -gt 1; then
		echo "Only one option at a time!"
		exit 1

	elif test $1 = "--gettext-tool"; then
		echo $GETTEXT_TOOL
		exit 0

	elif test $1 = "--help"; then
		echo "setup-gettext v$VERSION"
		echo "Usage:"
		echo "   --gettext-tool           Returns gettextize or autopoint, depending"
		echo "                            on the version of gettext installed."
		echo "   --gettext-version        Returns the version of gettext installed."
		echo "   --gettext-major-version  Returns the major version of gettext installed."
		echo "   --gettext-minor-version  Returns the minor version of gettext installed."
		echo "   --gettext-micro-version  Returns the micro version of gettext installed."
		echo "   --help                   Displays this help screen."
		echo
		exit 0

	elif test $1 = "--version"; then
		echo $VERSION
		exit 0

	elif test $1 = "--gettext-version"; then
		echo $GETTEXT_VERSION
		exit 0

	elif test $1 = "--gettext-major-version"; then
		echo $GETTEXT_MAJOR_VERSION
		exit 0

	elif test $1 = "--gettext-minor-version"; then
		echo $GETTEXT_MINOR_VERSION
		exit 0

	elif test $1 = "--gettext-micro-version"; then
		echo $GETTEXT_MICRO_VERSION
		exit 0

	elif test $1 = "--install"; then
		install
		echo "setup-gettext installed."
		exit 0

	elif test $1 = "--happy-url"; then
		echo http://gaim.sf.net/forkgettext.jpg
		exit 0

	elif test $1 = "--verbose"; then
		VERBOSE=1

	else
		echo "Invalid option '$1'"
		exit 1
	fi
fi

# Okay, run the main stuff
if test "$GETTEXT_TOOL" = "autopoint"; then
	backup_m4
	[ $VERBOSE -eq 1 ] && echo "  autopoint --force"
	echo n | autopoint --force || abort
	restore_m4

	if test $GETTEXT_MINOR_VERSION -ge 12; then
		cp po/Makefile.in.in po/.tmp-Makefile.in.in
		sed -e 's#echo "\$(top_builddir)/\$(MKINSTALLDIRS)" ;; esac#echo "\$(MKINSTALLDIRS)" ;; esac#1' < po/.tmp-Makefile.in.in > po/Makefile.in.in
		rm po/.tmp-Makefile.in.in
	fi
else
	if test $GETTEXT_MINOR_VERSION -eq 11; then
		backup_m4

		# Gettext is pure evil. It DEMANDS that we press Return no matter
		# what. This gets rid of their happy "feature" of doom.
		[ $VERBOSE -eq 1 ] && \
			echo "  gettextize --copy --force --intl --no-changelog"

		sed 's:read .*< /dev/tty::' `which gettextize` > .temp-gettextize
		chmod +x .temp-gettextize
		echo n | ./.temp-gettextize --copy --force --intl --no-changelog || abort
		rm .temp-gettextize

		restore_files
		restore_m4

		[ -f po/Makevars.template ] && mv po/Makevars.template po/Makevars
	else
		[ $VERBOSE -eq 1 ] && echo "  gettextize --copy --force"
		echo n | gettextize --copy --force || exit;
	fi
fi