Mercurial > pidgin.yaz

changeset 32327:c80ac2d937b7

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Change last remaining users of purple_connection_error to use purple_connection_error_reason. The "reason" I used in this code is probably not the most appropriate reason. My goal was to retain the same behavior before and after this change. It's not a bad idea for someone to look at each of these calls and determine if a different reason should be used... but it hasn't seemed to cause problems so far, so maybe it doesn't matter.
author Mark Doliner <mark@kingant.net>
date Sun, 21 Aug 2011 07:49:24 +0000
parents c3ea1711c372
children 27b3ad94e1e3
files libpurple/protocols/mxit/http.c libpurple/protocols/mxit/login.c libpurple/protocols/mxit/protocol.c libpurple/protocols/zephyr/zephyr.c
diffstat 4 files changed, 29 insertions(+), 29 deletions(-) [+]
line wrap: on
line diff
--- a/libpurple/protocols/mxit/http.c	Sun Aug 21 07:37:07 2011 +0000
+++ b/libpurple/protocols/mxit/http.c	Sun Aug 21 07:49:24 2011 +0000
@@ -273,7 +273,7 @@
 	/* source is the file descriptor of the new connection */
 	if ( source < 0 ) {
 		purple_debug_info( MXIT_PLUGIN_ID, "mxit_cb_http_connect failed: %s\n", error_message );
-		purple_connection_error( req->session->con, _( "Unable to connect to the MXit HTTP server. Please check your server settings." ) );
+		purple_connection_error_reason( req->session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Unable to connect to the MXit HTTP server. Please check your server settings." ) );
 		return;
 	}
 
--- a/libpurple/protocols/mxit/login.c	Sun Aug 21 07:37:07 2011 +0000
+++ b/libpurple/protocols/mxit/login.c	Sun Aug 21 07:49:24 2011 +0000
@@ -165,7 +165,7 @@
 	/* source is the file descriptor of the new connection */
 	if ( source < 0 ) {
 		purple_debug_info( MXIT_PLUGIN_ID, "mxit_cb_connect failed: %s\n", error_message );
-		purple_connection_error( session->con, _( "Unable to connect to the MXit server. Please check your server settings." ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Unable to connect to the MXit server. Please check your server settings." ) );
 		return;
 	}
 
@@ -202,7 +202,7 @@
 		/* socket connection */
 		data = purple_proxy_connect( session->con, session->acc, session->server, session->port, mxit_cb_connect, session );
 		if ( !data ) {
-			purple_connection_error( session->con, _( "Unable to connect to the MXit server. Please check your server settings." ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Unable to connect to the MXit server. Please check your server settings." ) );
 			return;
 		}
 	}
@@ -391,7 +391,7 @@
 
 	if ( !url_text ) {
 		/* no reply from the WAP site */
-		purple_connection_error( session->con, _( "Error contacting the MXit WAP site. Please try again later." ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Error contacting the MXit WAP site. Please try again later." ) );
 		return;
 	}
 
@@ -400,7 +400,7 @@
 
 	if ( !parts ) {
 		/* wapserver error */
-		purple_connection_error( session->con, _( "MXit is currently unable to process the request. Please try again later." ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "MXit is currently unable to process the request. Please try again later." ) );
 		return;
 	}
 
@@ -410,26 +410,26 @@
 				/* valid reply! */
 				break;
 			case '1' :
-				purple_connection_error( session->con, _( "Wrong security code entered. Please try again later." ) );
+				purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Wrong security code entered. Please try again later." ) );
 				return;
 			case '2' :
-				purple_connection_error( session->con, _( "Your session has expired. Please try again later." ) );
+				purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Your session has expired. Please try again later." ) );
 				return;
 			case '5' :
-				purple_connection_error( session->con, _( "Invalid country selected. Please try again." ) );
+				purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Invalid country selected. Please try again." ) );
 				return;
 			case '6' :
-				purple_connection_error( session->con, _( "The MXit ID you entered is not registered. Please register first." ) );
+				purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "The MXit ID you entered is not registered. Please register first." ) );
 				return;
 			case '7' :
-				purple_connection_error( session->con, _( "The MXit ID you entered is already registered. Please choose another." ) );
+				purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "The MXit ID you entered is already registered. Please choose another." ) );
 				/* this user's account already exists, so we need to change the registration login flag to be login */
 				purple_account_set_int( session->acc, MXIT_CONFIG_STATE, MXIT_STATE_LOGIN );
 				return;
 			case '3' :
 			case '4' :
 			default :
-				purple_connection_error( session->con, _( "Internal error. Please try again later." ) );
+				purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Internal error. Please try again later." ) );
 				return;
 	}
 
@@ -611,7 +611,7 @@
 
 	if ( !url_text ) {
 		/* no reply from the WAP site */
-		purple_connection_error( session->con, _( "Error contacting the MXit WAP site. Please try again later." ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Error contacting the MXit WAP site. Please try again later." ) );
 		return;
 	}
 
@@ -620,7 +620,7 @@
 
 	if ( ( !parts ) || ( parts[0][0] != '0' ) ) {
 		/* server could not find the user */
-		purple_connection_error( session->con, _( "MXit is currently unable to process the request. Please try again later." ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "MXit is currently unable to process the request. Please try again later." ) );
 		return;
 	}
 
--- a/libpurple/protocols/mxit/protocol.c	Sun Aug 21 07:37:07 2011 +0000
+++ b/libpurple/protocols/mxit/protocol.c	Sun Aug 21 07:49:24 2011 +0000
@@ -408,7 +408,7 @@
 		res = mxit_write_sock_packet( session->fd, data, datalen );
 		if ( res < 0 ) {
 			/* we must have lost the connection, so terminate it so that we can reconnect */
-			purple_connection_error( session->con, _( "We have lost the connection to MXit. Please reconnect." ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "We have lost the connection to MXit. Please reconnect." ) );
 		}
 	}
 	else {
@@ -530,7 +530,7 @@
 		if ( session->last_tx <= mxit_now_milli() - ( MXIT_ACK_TIMEOUT * 1000 ) ) {
 			/* ack timeout! so we close the connection here */
 			purple_debug_info( MXIT_PLUGIN_ID, "mxit_manage_queue: Timeout awaiting ACK for command '%i'\n", session->outack );
-			purple_connection_error( session->con, _( "Timeout while waiting for a response from the MXit server." ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Timeout while waiting for a response from the MXit server." ) );
 		}
 		return;
 	}
@@ -2192,7 +2192,7 @@
 		session->port = atoi( host[2] );
 	}
 	else {
-		purple_connection_error( session->con, _( "Cannot perform redirect using the specified protocol" ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Cannot perform redirect using the specified protocol" ) );
 		goto redirect_fail;
 	}
 
@@ -2361,7 +2361,7 @@
 
 	if ( packet->errcode == MXIT_ERRCODE_LOGGEDOUT ) {
 		/* we are not currently logged in, so we need to reconnect */
-		purple_connection_error( session->con, _( errdesc ) );
+		purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( errdesc ) );
 	}
 
 	/* packet command */
@@ -2375,7 +2375,7 @@
 				}
 				else {
 					snprintf( errmsg, sizeof( errmsg ), _( "Login error: %s (%i)" ), errdesc, packet->errcode );
-					purple_connection_error( session->con, errmsg );
+					purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, errmsg );
 					return -1;
 				}
 		case CP_CMD_LOGOUT :
@@ -2643,7 +2643,7 @@
 
 		if ( packet.rcount < 2 ) {
 			/* bad packet */
-			purple_connection_error( session->con, _( "Invalid packet received from MXit." ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "Invalid packet received from MXit." ) );
 			free_rx_packet( &packet );
 			continue;
 		}
@@ -2708,12 +2708,12 @@
 		len = read( session->fd, &ch, 1 );
 		if ( len < 0 ) {
 			/* connection error */
-			purple_connection_error( session->con, _( "A connection error occurred to MXit. (read stage 0x01)" ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "A connection error occurred to MXit. (read stage 0x01)" ) );
 			return;
 		}
 		else if ( len == 0 ) {
 			/* connection closed */
-			purple_connection_error( session->con, _( "A connection error occurred to MXit. (read stage 0x02)" ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "A connection error occurred to MXit. (read stage 0x02)" ) );
 			return;
 		}
 		else {
@@ -2723,7 +2723,7 @@
 				session->rx_lbuf[session->rx_i] = '\0';
 				session->rx_res = atoi( &session->rx_lbuf[3] );
 				if ( session->rx_res > CP_MAX_PACKET ) {
-					purple_connection_error( session->con, _( "A connection error occurred to MXit. (read stage 0x03)" ) );
+					purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "A connection error occurred to MXit. (read stage 0x03)" ) );
 				}
 				session->rx_state = RX_STATE_DATA;
 				session->rx_i = 0;
@@ -2734,7 +2734,7 @@
 				session->rx_i++;
 				if ( session->rx_i >= sizeof( session->rx_lbuf ) ) {
 					/* malformed packet length record (too long) */
-					purple_connection_error( session->con, _( "A connection error occurred to MXit. (read stage 0x04)" ) );
+					purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "A connection error occurred to MXit. (read stage 0x04)" ) );
 					return;
 				}
 			}
@@ -2745,12 +2745,12 @@
 		len = read( session->fd, &session->rx_dbuf[session->rx_i], session->rx_res );
 		if ( len < 0 ) {
 			/* connection error */
-			purple_connection_error( session->con, _( "A connection error occurred to MXit. (read stage 0x05)" ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "A connection error occurred to MXit. (read stage 0x05)" ) );
 			return;
 		}
 		else if ( len == 0 ) {
 			/* connection closed */
-			purple_connection_error( session->con, _( "A connection error occurred to MXit. (read stage 0x06)" ) );
+			purple_connection_error_reason( session->con, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, _( "A connection error occurred to MXit. (read stage 0x06)" ) );
 			return;
 		}
 		else {
--- a/libpurple/protocols/zephyr/zephyr.c	Sun Aug 21 07:37:07 2011 +0000
+++ b/libpurple/protocols/zephyr/zephyr.c	Sun Aug 21 07:49:24 2011 +0000
@@ -146,7 +146,7 @@
 					return TRUE;
 
 #define z_call_s(func, err)	if (func != ZERR_NONE) {\
-					purple_connection_error(gc, err);\
+					purple_connection_error_reason(gc, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, err);\
 					return;\
 				}
 
@@ -1585,7 +1585,7 @@
 	/* XXX z_call_s should actually try to report the com_err determined error */
 	if (use_tzc(zephyr)) {
 		pid_t pid;
-		/*		  purple_connection_error(gc,"tzc not supported yet"); */
+		/*		  purple_connection_error_reason(gc, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, "tzc not supported yet"); */
 		if ((pipe(zephyr->totzc) != 0) || (pipe(zephyr->fromtzc) != 0)) {
 			purple_debug_error("zephyr", "pipe creation failed. killing\n");
 			exit(-1);
@@ -1706,7 +1706,7 @@
 				ptr++;
 			}
 			if (ptr >=bufcur) {
-				purple_connection_error(gc,"invalid output by tzc (or bad parsing code)");
+				purple_connection_error_reason(gc, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, "invalid output by tzc (or bad parsing code)");
 				free(buf);
 				return;
 			}
@@ -1821,7 +1821,7 @@
 		purple_debug_info("zephyr","realm: %s\n",zephyr->realm);
 	}
 	else {
-		purple_connection_error(gc,"Only ZEPH0.2 supported currently");
+		purple_connection_error_reason(gc, PURPLE_CONNECTION_ERROR_NETWORK_ERROR, "Only ZEPH0.2 supported currently");
 		return;
 	}
 	purple_debug_info("zephyr","does it get here\n");