0
+ ��膩��� 1 Basic Installation
+ ��膩��� 2 ==================
+ ��膩��� 3
+ ��膩��� 4 These are generic installation instructions.
+ ��膩��� 5
+ ��膩��� 6 The `configure' shell script attempts to guess correct values for
+ ��膩��� 7 various system-dependent variables used during compilation. It uses
+ ��膩��� 8 those values to create a `Makefile' in each directory of the package.
+ ��膩��� 9 It may also create one or more `.h' files containing system-dependent
+ ��膩��� 10 definitions. Finally, it creates a shell script `config.status' that
+ ��膩��� 11 you can run in the future to recreate the current configuration, a file
+ ��膩��� 12 `config.cache' that saves the results of its tests to speed up
+ ��膩��� 13 reconfiguring, and a file `config.log' containing compiler output
+ ��膩��� 14 (useful mainly for debugging `configure').
+ ��膩��� 15
+ ��膩��� 16 If you need to do unusual things to compile the package, please try
+ ��膩��� 17 to figure out how `configure' could check whether to do them, and mail
+ ��膩��� 18 diffs or instructions to the address given in the `README' so they can
+ ��膩��� 19 be considered for the next release. If at some point `config.cache'
+ ��膩��� 20 contains results you don't want to keep, you may remove or edit it.
+ ��膩��� 21
6900
+ ��膩��� 22 The file `configure.ac' is used to create `configure' by a program
+ ��膩��� 23 called `autoconf'. You only need `configure.ac' if you want to change
0
+ ��膩��� 24 it or regenerate `configure' using a newer version of `autoconf'.
+ ��膩��� 25
+ ��膩��� 26 The simplest way to compile this package is:
+ ��膩��� 27
+ ��膩��� 28 1. `cd' to the directory containing the package's source code and type
+ ��膩��� 29 `./configure' to configure the package for your system. If you're
+ ��膩��� 30 using `csh' on an old version of System V, you might need to type
+ ��膩��� 31 `sh ./configure' instead to prevent `csh' from trying to execute
+ ��膩��� 32 `configure' itself.
+ ��膩��� 33
+ ��膩��� 34 Running `configure' takes awhile. While running, it prints some
+ ��膩��� 35 messages telling which features it is checking for.
+ ��膩��� 36
+ ��膩��� 37 2. Type `make' to compile the package.
+ ��膩��� 38
+ ��膩��� 39 3. Optionally, type `make check' to run any self-tests that come with
+ ��膩��� 40 the package.
+ ��膩��� 41
+ ��膩��� 42 4. Type `make install' to install the programs and any data files and
+ ��膩��� 43 documentation.
+ ��膩��� 44
+ ��膩��� 45 5. You can remove the program binaries and object files from the
+ ��膩��� 46 source code directory by typing `make clean'. To also remove the
+ ��膩��� 47 files that `configure' created (so you can compile the package for
+ ��膩��� 48 a different kind of computer), type `make distclean'. There is
+ ��膩��� 49 also a `make maintainer-clean' target, but that is intended mainly
+ ��膩��� 50 for the package's developers. If you use it, you may have to get
+ ��膩��� 51 all sorts of other programs in order to regenerate files that came
+ ��膩��� 52 with the distribution.
+ ��膩��� 53
+ ��膩��� 54 Compilers and Options
+ ��膩��� 55 =====================
+ ��膩��� 56
+ ��膩��� 57 Some systems require unusual options for compilation or linking that
+ ��膩��� 58 the `configure' script does not know about. You can give `configure'
+ ��膩��� 59 initial values for variables by setting them in the environment. Using
+ ��膩��� 60 a Bourne-compatible shell, you can do that on the command line like
+ ��膩��� 61 this:
+ ��膩��� 62 CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+ ��膩��� 63
+ ��膩��� 64 Or on systems that have the `env' program, you can do it like this:
+ ��膩��� 65 env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ ��膩��� 66
+ ��膩��� 67 Compiling For Multiple Architectures
+ ��膩��� 68 ====================================
+ ��膩��� 69
+ ��膩��� 70 You can compile the package for more than one kind of computer at the
+ ��膩��� 71 same time, by placing the object files for each architecture in their
+ ��膩��� 72 own directory. To do this, you must use a version of `make' that
+ ��膩��� 73 supports the `VPATH' variable, such as GNU `make'. `cd' to the
+ ��膩��� 74 directory where you want the object files and executables to go and run
+ ��膩��� 75 the `configure' script. `configure' automatically checks for the
+ ��膩��� 76 source code in the directory that `configure' is in and in `..'.
+ ��膩��� 77
+ ��膩��� 78 If you have to use a `make' that does not supports the `VPATH'
+ ��膩��� 79 variable, you have to compile the package for one architecture at a time
+ ��膩��� 80 in the source code directory. After you have installed the package for
+ ��膩��� 81 one architecture, use `make distclean' before reconfiguring for another
+ ��膩��� 82 architecture.
+ ��膩��� 83
+ ��膩��� 84 Installation Names
+ ��膩��� 85 ==================
+ ��膩��� 86
+ ��膩��� 87 By default, `make install' will install the package's files in
+ ��膩��� 88 `/usr/local/bin', `/usr/local/man', etc. You can specify an
+ ��膩��� 89 installation prefix other than `/usr/local' by giving `configure' the
+ ��膩��� 90 option `--prefix=PATH'.
+ ��膩��� 91
+ ��膩��� 92 You can specify separate installation prefixes for
+ ��膩��� 93 architecture-specific files and architecture-independent files. If you
+ ��膩��� 94 give `configure' the option `--exec-prefix=PATH', the package will use
+ ��膩��� 95 PATH as the prefix for installing programs and libraries.
+ ��膩��� 96 Documentation and other data files will still use the regular prefix.
+ ��膩��� 97
+ ��膩��� 98 In addition, if you use an unusual directory layout you can give
+ ��膩��� 99 options like `--bindir=PATH' to specify different values for particular
+ ��膩��� 100 kinds of files. Run `configure --help' for a list of the directories
+ ��膩��� 101 you can set and what kinds of files go in them.
+ ��膩��� 102
+ ��膩��� 103 If the package supports it, you can cause programs to be installed
+ ��膩��� 104 with an extra prefix or suffix on their names by giving `configure' the
+ ��膩��� 105 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+ ��膩��� 106
+ ��膩��� 107 Optional Features
+ ��膩��� 108 =================
+ ��膩��� 109
+ ��膩��� 110 Some packages pay attention to `--enable-FEATURE' options to
+ ��膩��� 111 `configure', where FEATURE indicates an optional part of the package.
+ ��膩��� 112 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+ ��膩��� 113 is something like `gnu-as' or `x' (for the X Window System). The
+ ��膩��� 114 `README' should mention any `--enable-' and `--with-' options that the
+ ��膩��� 115 package recognizes.
+ ��膩��� 116
+ ��膩��� 117 For packages that use the X Window System, `configure' can usually
+ ��膩��� 118 find the X include and library files automatically, but if it doesn't,
+ ��膩��� 119 you can use the `configure' options `--x-includes=DIR' and
+ ��膩��� 120 `--x-libraries=DIR' to specify their locations.
+ ��膩��� 121
+ ��膩��� 122 Specifying the System Type
+ ��膩��� 123 ==========================
+ ��膩��� 124
+ ��膩��� 125 There may be some features `configure' can not figure out
+ ��膩��� 126 automatically, but needs to determine by the type of host the package
+ ��膩��� 127 will run on. Usually `configure' can figure that out, but if it prints
+ ��膩��� 128 a message saying it can not guess the host type, give it the
+ ��膩��� 129 `--host=TYPE' option. TYPE can either be a short name for the system
+ ��膩��� 130 type, such as `sun4', or a canonical name with three fields:
+ ��膩��� 131 CPU-COMPANY-SYSTEM
+ ��膩��� 132
+ ��膩��� 133 See the file `config.sub' for the possible values of each field. If
+ ��膩��� 134 `config.sub' isn't included in this package, then this package doesn't
+ ��膩��� 135 need to know the host type.
+ ��膩��� 136
+ ��膩��� 137 If you are building compiler tools for cross-compiling, you can also
+ ��膩��� 138 use the `--target=TYPE' option to select the type of system they will
+ ��膩��� 139 produce code for and the `--build=TYPE' option to select the type of
+ ��膩��� 140 system on which you are compiling the package.
+ ��膩��� 141
+ ��膩��� 142 Sharing Defaults
+ ��膩��� 143 ================
+ ��膩��� 144
+ ��膩��� 145 If you want to set default values for `configure' scripts to share,
+ ��膩��� 146 you can create a site shell script called `config.site' that gives
+ ��膩��� 147 default values for variables like `CC', `cache_file', and `prefix'.
+ ��膩��� 148 `configure' looks for `PREFIX/share/config.site' if it exists, then
+ ��膩��� 149 `PREFIX/etc/config.site' if it exists. Or, you can set the
+ ��膩��� 150 `CONFIG_SITE' environment variable to the location of the site script.
+ ��膩��� 151 A warning: not all `configure' scripts look for a site script.
+ ��膩��� 152
+ ��膩��� 153 Operation Controls
+ ��膩��� 154 ==================
+ ��膩��� 155
+ ��膩��� 156 `configure' recognizes the following options to control how it
+ ��膩��� 157 operates.
+ ��膩��� 158
+ ��膩��� 159 `--cache-file=FILE'
+ ��膩��� 160 Use and save the results of the tests in FILE instead of
+ ��膩��� 161 `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ ��膩��� 162 debugging `configure'.
+ ��膩��� 163
+ ��膩��� 164 `--help'
+ ��膩��� 165 Print a summary of the options to `configure', and exit.
+ ��膩��� 166
+ ��膩��� 167 `--quiet'
+ ��膩��� 168 `--silent'
+ ��膩��� 169 `-q'
+ ��膩��� 170 Do not print messages saying which checks are being made. To
+ ��膩��� 171 suppress all normal output, redirect it to `/dev/null' (any error
+ ��膩��� 172 messages will still be shown).
+ ��膩��� 173
+ ��膩��� 174 `--srcdir=DIR'
+ ��膩��� 175 Look for the package's source code in directory DIR. Usually
+ ��膩��� 176 `configure' can determine that directory automatically.
+ ��膩��� 177
+ ��膩��� 178 `--version'
+ ��膩��� 179 Print the version of Autoconf used to generate the `configure'
+ ��膩��� 180 script, and exit.
+ ��膩��� 181
+ ��膩��� 182 `configure' also accepts some other, not widely useful, options.