0
+ 鐃緒申��申鐃緒申 1 Basic Installation
+ 鐃緒申��申鐃緒申 2 ==================
+ 鐃緒申��申鐃緒申 3
+ 鐃緒申��申鐃緒申 4 These are generic installation instructions.
+ 鐃緒申��申鐃緒申 5
+ 鐃緒申��申鐃緒申 6 The `configure' shell script attempts to guess correct values for
+ 鐃緒申��申鐃緒申 7 various system-dependent variables used during compilation. It uses
+ 鐃緒申��申鐃緒申 8 those values to create a `Makefile' in each directory of the package.
+ 鐃緒申��申鐃緒申 9 It may also create one or more `.h' files containing system-dependent
+ 鐃緒申��申鐃緒申 10 definitions. Finally, it creates a shell script `config.status' that
+ 鐃緒申��申鐃緒申 11 you can run in the future to recreate the current configuration, a file
+ 鐃緒申��申鐃緒申 12 `config.cache' that saves the results of its tests to speed up
+ 鐃緒申��申鐃緒申 13 reconfiguring, and a file `config.log' containing compiler output
+ 鐃緒申��申鐃緒申 14 (useful mainly for debugging `configure').
+ 鐃緒申��申鐃緒申 15
+ 鐃緒申��申鐃緒申 16 If you need to do unusual things to compile the package, please try
+ 鐃緒申��申鐃緒申 17 to figure out how `configure' could check whether to do them, and mail
+ 鐃緒申��申鐃緒申 18 diffs or instructions to the address given in the `README' so they can
+ 鐃緒申��申鐃緒申 19 be considered for the next release. If at some point `config.cache'
+ 鐃緒申��申鐃緒申 20 contains results you don't want to keep, you may remove or edit it.
+ 鐃緒申��申鐃緒申 21
6900
+ 鐃緒申��申鐃緒申 22 The file `configure.ac' is used to create `configure' by a program
+ 鐃緒申��申鐃緒申 23 called `autoconf'. You only need `configure.ac' if you want to change
0
+ 鐃緒申��申鐃緒申 24 it or regenerate `configure' using a newer version of `autoconf'.
+ 鐃緒申��申鐃緒申 25
+ 鐃緒申��申鐃緒申 26 The simplest way to compile this package is:
+ 鐃緒申��申鐃緒申 27
+ 鐃緒申��申鐃緒申 28 1. `cd' to the directory containing the package's source code and type
+ 鐃緒申��申鐃緒申 29 `./configure' to configure the package for your system. If you're
+ 鐃緒申��申鐃緒申 30 using `csh' on an old version of System V, you might need to type
+ 鐃緒申��申鐃緒申 31 `sh ./configure' instead to prevent `csh' from trying to execute
+ 鐃緒申��申鐃緒申 32 `configure' itself.
+ 鐃緒申��申鐃緒申 33
+ 鐃緒申��申鐃緒申 34 Running `configure' takes awhile. While running, it prints some
+ 鐃緒申��申鐃緒申 35 messages telling which features it is checking for.
+ 鐃緒申��申鐃緒申 36
+ 鐃緒申��申鐃緒申 37 2. Type `make' to compile the package.
+ 鐃緒申��申鐃緒申 38
+ 鐃緒申��申鐃緒申 39 3. Optionally, type `make check' to run any self-tests that come with
+ 鐃緒申��申鐃緒申 40 the package.
+ 鐃緒申��申鐃緒申 41
+ 鐃緒申��申鐃緒申 42 4. Type `make install' to install the programs and any data files and
+ 鐃緒申��申鐃緒申 43 documentation.
+ 鐃緒申��申鐃緒申 44
+ 鐃緒申��申鐃緒申 45 5. You can remove the program binaries and object files from the
+ 鐃緒申��申鐃緒申 46 source code directory by typing `make clean'. To also remove the
+ 鐃緒申��申鐃緒申 47 files that `configure' created (so you can compile the package for
+ 鐃緒申��申鐃緒申 48 a different kind of computer), type `make distclean'. There is
+ 鐃緒申��申鐃緒申 49 also a `make maintainer-clean' target, but that is intended mainly
+ 鐃緒申��申鐃緒申 50 for the package's developers. If you use it, you may have to get
+ 鐃緒申��申鐃緒申 51 all sorts of other programs in order to regenerate files that came
+ 鐃緒申��申鐃緒申 52 with the distribution.
+ 鐃緒申��申鐃緒申 53
+ 鐃緒申��申鐃緒申 54 Compilers and Options
+ 鐃緒申��申鐃緒申 55 =====================
+ 鐃緒申��申鐃緒申 56
+ 鐃緒申��申鐃緒申 57 Some systems require unusual options for compilation or linking that
+ 鐃緒申��申鐃緒申 58 the `configure' script does not know about. You can give `configure'
+ 鐃緒申��申鐃緒申 59 initial values for variables by setting them in the environment. Using
+ 鐃緒申��申鐃緒申 60 a Bourne-compatible shell, you can do that on the command line like
+ 鐃緒申��申鐃緒申 61 this:
+ 鐃緒申��申鐃緒申 62 CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+ 鐃緒申��申鐃緒申 63
+ 鐃緒申��申鐃緒申 64 Or on systems that have the `env' program, you can do it like this:
+ 鐃緒申��申鐃緒申 65 env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ 鐃緒申��申鐃緒申 66
+ 鐃緒申��申鐃緒申 67 Compiling For Multiple Architectures
+ 鐃緒申��申鐃緒申 68 ====================================
+ 鐃緒申��申鐃緒申 69
+ 鐃緒申��申鐃緒申 70 You can compile the package for more than one kind of computer at the
+ 鐃緒申��申鐃緒申 71 same time, by placing the object files for each architecture in their
+ 鐃緒申��申鐃緒申 72 own directory. To do this, you must use a version of `make' that
+ 鐃緒申��申鐃緒申 73 supports the `VPATH' variable, such as GNU `make'. `cd' to the
+ 鐃緒申��申鐃緒申 74 directory where you want the object files and executables to go and run
+ 鐃緒申��申鐃緒申 75 the `configure' script. `configure' automatically checks for the
+ 鐃緒申��申鐃緒申 76 source code in the directory that `configure' is in and in `..'.
+ 鐃緒申��申鐃緒申 77
+ 鐃緒申��申鐃緒申 78 If you have to use a `make' that does not supports the `VPATH'
+ 鐃緒申��申鐃緒申 79 variable, you have to compile the package for one architecture at a time
+ 鐃緒申��申鐃緒申 80 in the source code directory. After you have installed the package for
+ 鐃緒申��申鐃緒申 81 one architecture, use `make distclean' before reconfiguring for another
+ 鐃緒申��申鐃緒申 82 architecture.
+ 鐃緒申��申鐃緒申 83
+ 鐃緒申��申鐃緒申 84 Installation Names
+ 鐃緒申��申鐃緒申 85 ==================
+ 鐃緒申��申鐃緒申 86
+ 鐃緒申��申鐃緒申 87 By default, `make install' will install the package's files in
+ 鐃緒申��申鐃緒申 88 `/usr/local/bin', `/usr/local/man', etc. You can specify an
+ 鐃緒申��申鐃緒申 89 installation prefix other than `/usr/local' by giving `configure' the
+ 鐃緒申��申鐃緒申 90 option `--prefix=PATH'.
+ 鐃緒申��申鐃緒申 91
+ 鐃緒申��申鐃緒申 92 You can specify separate installation prefixes for
+ 鐃緒申��申鐃緒申 93 architecture-specific files and architecture-independent files. If you
+ 鐃緒申��申鐃緒申 94 give `configure' the option `--exec-prefix=PATH', the package will use
+ 鐃緒申��申鐃緒申 95 PATH as the prefix for installing programs and libraries.
+ 鐃緒申��申鐃緒申 96 Documentation and other data files will still use the regular prefix.
+ 鐃緒申��申鐃緒申 97
+ 鐃緒申��申鐃緒申 98 In addition, if you use an unusual directory layout you can give
+ 鐃緒申��申鐃緒申 99 options like `--bindir=PATH' to specify different values for particular
+ 鐃緒申��申鐃緒申 100 kinds of files. Run `configure --help' for a list of the directories
+ 鐃緒申��申鐃緒申 101 you can set and what kinds of files go in them.
+ 鐃緒申��申鐃緒申 102
+ 鐃緒申��申鐃緒申 103 If the package supports it, you can cause programs to be installed
+ 鐃緒申��申鐃緒申 104 with an extra prefix or suffix on their names by giving `configure' the
+ 鐃緒申��申鐃緒申 105 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+ 鐃緒申��申鐃緒申 106
+ 鐃緒申��申鐃緒申 107 Optional Features
+ 鐃緒申��申鐃緒申 108 =================
+ 鐃緒申��申鐃緒申 109
+ 鐃緒申��申鐃緒申 110 Some packages pay attention to `--enable-FEATURE' options to
+ 鐃緒申��申鐃緒申 111 `configure', where FEATURE indicates an optional part of the package.
+ 鐃緒申��申鐃緒申 112 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+ 鐃緒申��申鐃緒申 113 is something like `gnu-as' or `x' (for the X Window System). The
+ 鐃緒申��申鐃緒申 114 `README' should mention any `--enable-' and `--with-' options that the
+ 鐃緒申��申鐃緒申 115 package recognizes.
+ 鐃緒申��申鐃緒申 116
+ 鐃緒申��申鐃緒申 117 For packages that use the X Window System, `configure' can usually
+ 鐃緒申��申鐃緒申 118 find the X include and library files automatically, but if it doesn't,
+ 鐃緒申��申鐃緒申 119 you can use the `configure' options `--x-includes=DIR' and
+ 鐃緒申��申鐃緒申 120 `--x-libraries=DIR' to specify their locations.
+ 鐃緒申��申鐃緒申 121
+ 鐃緒申��申鐃緒申 122 Specifying the System Type
+ 鐃緒申��申鐃緒申 123 ==========================
+ 鐃緒申��申鐃緒申 124
+ 鐃緒申��申鐃緒申 125 There may be some features `configure' can not figure out
+ 鐃緒申��申鐃緒申 126 automatically, but needs to determine by the type of host the package
+ 鐃緒申��申鐃緒申 127 will run on. Usually `configure' can figure that out, but if it prints
+ 鐃緒申��申鐃緒申 128 a message saying it can not guess the host type, give it the
+ 鐃緒申��申鐃緒申 129 `--host=TYPE' option. TYPE can either be a short name for the system
+ 鐃緒申��申鐃緒申 130 type, such as `sun4', or a canonical name with three fields:
+ 鐃緒申��申鐃緒申 131 CPU-COMPANY-SYSTEM
+ 鐃緒申��申鐃緒申 132
+ 鐃緒申��申鐃緒申 133 See the file `config.sub' for the possible values of each field. If
+ 鐃緒申��申鐃緒申 134 `config.sub' isn't included in this package, then this package doesn't
+ 鐃緒申��申鐃緒申 135 need to know the host type.
+ 鐃緒申��申鐃緒申 136
+ 鐃緒申��申鐃緒申 137 If you are building compiler tools for cross-compiling, you can also
+ 鐃緒申��申鐃緒申 138 use the `--target=TYPE' option to select the type of system they will
+ 鐃緒申��申鐃緒申 139 produce code for and the `--build=TYPE' option to select the type of
+ 鐃緒申��申鐃緒申 140 system on which you are compiling the package.
+ 鐃緒申��申鐃緒申 141
+ 鐃緒申��申鐃緒申 142 Sharing Defaults
+ 鐃緒申��申鐃緒申 143 ================
+ 鐃緒申��申鐃緒申 144
+ 鐃緒申��申鐃緒申 145 If you want to set default values for `configure' scripts to share,
+ 鐃緒申��申鐃緒申 146 you can create a site shell script called `config.site' that gives
+ 鐃緒申��申鐃緒申 147 default values for variables like `CC', `cache_file', and `prefix'.
+ 鐃緒申��申鐃緒申 148 `configure' looks for `PREFIX/share/config.site' if it exists, then
+ 鐃緒申��申鐃緒申 149 `PREFIX/etc/config.site' if it exists. Or, you can set the
+ 鐃緒申��申鐃緒申 150 `CONFIG_SITE' environment variable to the location of the site script.
+ 鐃緒申��申鐃緒申 151 A warning: not all `configure' scripts look for a site script.
+ 鐃緒申��申鐃緒申 152
+ 鐃緒申��申鐃緒申 153 Operation Controls
+ 鐃緒申��申鐃緒申 154 ==================
+ 鐃緒申��申鐃緒申 155
+ 鐃緒申��申鐃緒申 156 `configure' recognizes the following options to control how it
+ 鐃緒申��申鐃緒申 157 operates.
+ 鐃緒申��申鐃緒申 158
+ 鐃緒申��申鐃緒申 159 `--cache-file=FILE'
+ 鐃緒申��申鐃緒申 160 Use and save the results of the tests in FILE instead of
+ 鐃緒申��申鐃緒申 161 `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ 鐃緒申��申鐃緒申 162 debugging `configure'.
+ 鐃緒申��申鐃緒申 163
+ 鐃緒申��申鐃緒申 164 `--help'
+ 鐃緒申��申鐃緒申 165 Print a summary of the options to `configure', and exit.
+ 鐃緒申��申鐃緒申 166
+ 鐃緒申��申鐃緒申 167 `--quiet'
+ 鐃緒申��申鐃緒申 168 `--silent'
+ 鐃緒申��申鐃緒申 169 `-q'
+ 鐃緒申��申鐃緒申 170 Do not print messages saying which checks are being made. To
+ 鐃緒申��申鐃緒申 171 suppress all normal output, redirect it to `/dev/null' (any error
+ 鐃緒申��申鐃緒申 172 messages will still be shown).
+ 鐃緒申��申鐃緒申 173
+ 鐃緒申��申鐃緒申 174 `--srcdir=DIR'
+ 鐃緒申��申鐃緒申 175 Look for the package's source code in directory DIR. Usually
+ 鐃緒申��申鐃緒申 176 `configure' can determine that directory automatically.
+ 鐃緒申��申鐃緒申 177
+ 鐃緒申��申鐃緒申 178 `--version'
+ 鐃緒申��申鐃緒申 179 Print the version of Autoconf used to generate the `configure'
+ 鐃緒申��申鐃緒申 180 script, and exit.
+ 鐃緒申��申鐃緒申 181
+ 鐃緒申��申鐃緒申 182 `configure' also accepts some other, not widely useful, options.