Mercurial > pidgin
annotate libpurple/protocols/jabber/adhoccommands.c @ 22219:797230b3e48e
Add accessor and update finch to not touch the internals of PurpleBuddy and PurpleChat.
author | Sadrul Habib Chowdhury <imadil@gmail.com> |
---|---|
date | Sun, 27 Jan 2008 04:06:39 +0000 |
parents | 38cc722159ff |
children | 16734635febf a1b2f2dd4849 |
rev | line source |
---|---|
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
1 /* |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
2 * purple - Jabber Protocol Plugin |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
3 * |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
4 * Copyright (C) 2007, Andreas Monitzer <andy@monitzer.com> |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
5 * |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
6 * This program is free software; you can redistribute it and/or modify |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
7 * it under the terms of the GNU General Public License as published by |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
8 * the Free Software Foundation; either version 2 of the License, or |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
9 * (at your option) any later version. |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
10 * |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
11 * This program is distributed in the hope that it will be useful, |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
14 * GNU General Public License for more details. |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
15 * |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
16 * You should have received a copy of the GNU General Public License |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
17 * along with this program; if not, write to the Free Software |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
19 * |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
20 */ |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
21 |
19698
d32ed28cf645
Fix mingw build of xmpp prpl
Daniel Atallah <daniel.atallah@gmail.com>
parents:
18697
diff
changeset
|
22 #include "internal.h" |
d32ed28cf645
Fix mingw build of xmpp prpl
Daniel Atallah <daniel.atallah@gmail.com>
parents:
18697
diff
changeset
|
23 |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
24 #include "adhoccommands.h" |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
25 #include <string.h> |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
26 #include "internal.h" |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
27 #include "xdata.h" |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
28 #include "iq.h" |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
29 #include "request.h" |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
30 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
31 static void do_adhoc_ignoreme(JabberStream *js, ...) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
32 /* we don't have to do anything */ |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
33 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
34 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
35 typedef struct _JabberAdHocActionInfo { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
36 char *sessionid; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
37 char *who; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
38 char *node; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
39 GList *actionslist; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
40 } JabberAdHocActionInfo; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
41 |
17882
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
42 void jabber_adhoc_disco_result_cb(JabberStream *js, xmlnode *packet, gpointer data) { |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
43 const char *from = xmlnode_get_attrib(packet, "from"); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
44 const char *type = xmlnode_get_attrib(packet, "type"); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
45 const char *node; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
46 xmlnode *query, *item; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
47 JabberID *jabberid; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
48 JabberBuddy *jb; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
49 JabberBuddyResource *jbr = NULL; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
50 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
51 if(strcmp(type, "result")) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
52 return; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
53 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
54 query = xmlnode_get_child_with_namespace(packet,"query","http://jabber.org/protocol/disco#items"); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
55 if(!query) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
56 return; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
57 node = xmlnode_get_attrib(query,"node"); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
58 if(!node || strcmp(node, "http://jabber.org/protocol/commands")) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
59 return; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
60 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
61 if((jabberid = jabber_id_new(from))) { |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
62 if(jabberid->resource && (jb = jabber_buddy_find(js, from, TRUE))) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
63 jbr = jabber_buddy_find_resource(jb, jabberid->resource); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
64 jabber_id_free(jabberid); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
65 } |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
66 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
67 if(!jbr) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
68 return; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
69 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
70 if(jbr->commands) { |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
71 /* since the list we just received is complete, wipe the old one */ |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
72 while(jbr->commands) { |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
73 JabberAdHocCommands *cmd = jbr->commands->data; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
74 g_free(cmd->jid); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
75 g_free(cmd->node); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
76 g_free(cmd->name); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
77 g_free(cmd); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
78 jbr->commands = g_list_delete_link(jbr->commands, jbr->commands); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
79 } |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
80 } |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
81 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
82 for(item = query->child; item; item = item->next) { |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
83 JabberAdHocCommands *cmd; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
84 if(item->type != XMLNODE_TYPE_TAG) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
85 continue; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
86 if(strcmp(item->name, "item")) |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
87 continue; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
88 cmd = g_new0(JabberAdHocCommands, 1); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
89 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
90 cmd->jid = g_strdup(xmlnode_get_attrib(item,"jid")); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
91 cmd->node = g_strdup(xmlnode_get_attrib(item,"node")); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
92 cmd->name = g_strdup(xmlnode_get_attrib(item,"name")); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
93 |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
94 jbr->commands = g_list_append(jbr->commands,cmd); |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
95 } |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
96 } |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
97 |
17904
49fe31a64716
Fixed a bug that prevented multi-stage ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17884
diff
changeset
|
98 static void jabber_adhoc_parse(JabberStream *js, xmlnode *packet, gpointer data); |
49fe31a64716
Fixed a bug that prevented multi-stage ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17884
diff
changeset
|
99 |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
100 static void do_adhoc_action_cb(JabberStream *js, xmlnode *result, const char *actionhandle, gpointer user_data) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
101 xmlnode *command; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
102 GList *action; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
103 JabberAdHocActionInfo *actionInfo = user_data; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
104 JabberIq *iq = jabber_iq_new(js, JABBER_IQ_SET); |
17904
49fe31a64716
Fixed a bug that prevented multi-stage ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17884
diff
changeset
|
105 jabber_iq_set_callback(iq, jabber_adhoc_parse, NULL); |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
106 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
107 xmlnode_set_attrib(iq->node, "to", actionInfo->who); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
108 command = xmlnode_new_child(iq->node,"command"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
109 xmlnode_set_namespace(command,"http://jabber.org/protocol/commands"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
110 xmlnode_set_attrib(command,"sessionid",actionInfo->sessionid); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
111 xmlnode_set_attrib(command,"node",actionInfo->node); |
21176
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
112 |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
113 /* cancel is handled differently on ad-hoc commands than regular forms */ |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
114 if(!strcmp(xmlnode_get_namespace(result),"jabber:x:data") && !strcmp(xmlnode_get_attrib(result, "type"),"cancel")) { |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
115 xmlnode_set_attrib(command,"action","cancel"); |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
116 } else { |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
117 if(actionhandle) |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
118 xmlnode_set_attrib(command,"action",actionhandle); |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
119 xmlnode_insert_child(command,result); |
d1da36099088
Fixed cancelling ad-hoc commands
Andreas Monitzer <pidgin@monitzer.com>
parents:
20058
diff
changeset
|
120 } |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
121 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
122 for(action = actionInfo->actionslist; action; action = g_list_next(action)) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
123 char *handle = action->data; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
124 g_free(handle); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
125 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
126 g_list_free(actionInfo->actionslist); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
127 g_free(actionInfo->sessionid); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
128 g_free(actionInfo->who); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
129 g_free(actionInfo->node); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
130 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
131 jabber_iq_send(iq); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
132 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
133 |
17884
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
134 static void jabber_adhoc_parse(JabberStream *js, xmlnode *packet, gpointer data) { |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
135 xmlnode *command = xmlnode_get_child_with_namespace(packet, "command", "http://jabber.org/protocol/commands"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
136 const char *status = xmlnode_get_attrib(command,"status"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
137 xmlnode *xdata = xmlnode_get_child_with_namespace(command,"x","jabber:x:data"); |
18697
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
138 const char *type = xmlnode_get_attrib(packet,"type"); |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
139 |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
140 if(type && !strcmp(type,"error")) { |
20814
bde477ec6a71
Stop jabber setting wants_to_die itself. This involved plumbing disconnection
Will Thompson <will.thompson@collabora.co.uk>
parents:
20058
diff
changeset
|
141 char *msg = jabber_parse_error(js, packet, NULL); |
18697
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
142 if(!msg) |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
143 msg = g_strdup(_("Unknown Error")); |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
144 |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
145 purple_notify_error(NULL, _("Ad-Hoc Command Failed"), |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
146 _("Ad-Hoc Command Failed"), msg); |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
147 g_free(msg); |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
148 return; |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
149 } |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
150 if(!type || strcmp(type,"result")) |
27fcb91ae08a
Implemented error handling for ad-hoc commands.
Andreas Monitzer <pidgin@monitzer.com>
parents:
18694
diff
changeset
|
151 return; |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
152 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
153 if(!status) |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
154 return; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
155 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
156 if(!strcmp(status,"completed")) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
157 /* display result */ |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
158 xmlnode *note = xmlnode_get_child(command,"note"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
159 |
20058
5103485b4b26
Plug some memory leaks.
Sadrul Habib Chowdhury <imadil@gmail.com>
parents:
20000
diff
changeset
|
160 if(note) { |
5103485b4b26
Plug some memory leaks.
Sadrul Habib Chowdhury <imadil@gmail.com>
parents:
20000
diff
changeset
|
161 char *data = xmlnode_get_data(note); |
5103485b4b26
Plug some memory leaks.
Sadrul Habib Chowdhury <imadil@gmail.com>
parents:
20000
diff
changeset
|
162 purple_notify_info(NULL, xmlnode_get_attrib(packet, "from"), data, NULL); |
5103485b4b26
Plug some memory leaks.
Sadrul Habib Chowdhury <imadil@gmail.com>
parents:
20000
diff
changeset
|
163 g_free(data); |
5103485b4b26
Plug some memory leaks.
Sadrul Habib Chowdhury <imadil@gmail.com>
parents:
20000
diff
changeset
|
164 } |
17871
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
165 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
166 if(xdata) |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
167 jabber_x_data_request(js, xdata, (jabber_x_data_cb)do_adhoc_ignoreme, NULL); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
168 return; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
169 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
170 if(!strcmp(status,"executing")) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
171 /* this command needs more steps */ |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
172 xmlnode *actions, *action; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
173 int actionindex = 0; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
174 GList *actionslist = NULL; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
175 JabberAdHocActionInfo *actionInfo; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
176 if(!xdata) |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
177 return; /* shouldn't happen */ |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
178 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
179 actions = xmlnode_get_child(command,"actions"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
180 if(!actions) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
181 JabberXDataAction *defaultaction = g_new0(JabberXDataAction, 1); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
182 defaultaction->name = g_strdup(_("execute")); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
183 defaultaction->handle = g_strdup("execute"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
184 actionslist = g_list_append(actionslist, defaultaction); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
185 } else { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
186 const char *defaultactionhandle = xmlnode_get_attrib(actions, "execute"); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
187 int index = 0; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
188 for(action = actions->child; action; action = action->next, ++index) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
189 if(action->type == XMLNODE_TYPE_TAG) { |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
190 JabberXDataAction *newaction = g_new0(JabberXDataAction, 1); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
191 newaction->name = g_strdup(_(action->name)); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
192 newaction->handle = g_strdup(action->name); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
193 actionslist = g_list_append(actionslist, newaction); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
194 if(defaultactionhandle && !strcmp(defaultactionhandle, action->name)) |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
195 actionindex = index; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
196 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
197 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
198 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
199 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
200 actionInfo = g_new0(JabberAdHocActionInfo, 1); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
201 actionInfo->sessionid = g_strdup(xmlnode_get_attrib(command,"sessionid")); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
202 actionInfo->who = g_strdup(xmlnode_get_attrib(packet,"from")); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
203 actionInfo->node = g_strdup(xmlnode_get_attrib(command,"node")); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
204 actionInfo->actionslist = actionslist; |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
205 |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
206 jabber_x_data_request_with_actions(js,xdata,actionslist,actionindex,do_adhoc_action_cb,actionInfo); |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
207 } |
43df07968000
Implemented XEP-0050: Ad-Hoc Commands. Note that this XEP requires sending an initial command to the peer, which is not implemented in libpurple itself (since this requires a discovery browser or equivalent).
Andreas Monitzer <pidgin@monitzer.com>
parents:
diff
changeset
|
208 } |
17882
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
209 |
17884
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
210 void jabber_adhoc_execute_action(PurpleBlistNode *node, gpointer data) { |
17882
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
211 if (PURPLE_BLIST_NODE_IS_BUDDY(node)) { |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
212 JabberAdHocCommands *cmd = data; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
213 PurpleBuddy *buddy = (PurpleBuddy *) node; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
214 JabberStream *js = purple_account_get_connection(buddy->account)->proto_data; |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
215 |
17884
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
216 jabber_adhoc_execute(js, cmd); |
17882
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
217 } |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
218 } |
f88b3a093cba
Implemented ad-hoc commands for the buddy action menu (untested), implemented the receiving end of XEP-0115: Entity Capabilities. Note that this seems not to be reliable right now, since some clients seem to have a very broken [read: completely non-functional] implementation (most notably Gajim and the py-transports).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17872
diff
changeset
|
219 |
17883
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
220 static void jabber_adhoc_server_got_list_cb(JabberStream *js, xmlnode *packet, gpointer data) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
221 xmlnode *query = xmlnode_get_child_with_namespace(packet, "query", "http://jabber.org/protocol/disco#items"); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
222 xmlnode *item; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
223 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
224 if(!query) |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
225 return; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
226 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
227 /* clean current list (just in case there is one) */ |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
228 while(js->commands) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
229 JabberAdHocCommands *cmd = js->commands->data; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
230 g_free(cmd->jid); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
231 g_free(cmd->node); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
232 g_free(cmd->node); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
233 g_free(cmd); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
234 js->commands = g_list_delete_link(js->commands, js->commands); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
235 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
236 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
237 /* re-fill list */ |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
238 for(item = query->child; item; item = item->next) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
239 JabberAdHocCommands *cmd; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
240 if(item->type != XMLNODE_TYPE_TAG) |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
241 continue; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
242 if(strcmp(item->name, "item")) |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
243 continue; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
244 cmd = g_new0(JabberAdHocCommands, 1); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
245 cmd->jid = g_strdup(xmlnode_get_attrib(item,"jid")); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
246 cmd->node = g_strdup(xmlnode_get_attrib(item,"node")); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
247 cmd->name = g_strdup(xmlnode_get_attrib(item,"name")); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
248 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
249 js->commands = g_list_append(js->commands,cmd); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
250 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
251 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
252 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
253 void jabber_adhoc_server_get_list(JabberStream *js) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
254 JabberIq *iq = jabber_iq_new_query(js,JABBER_IQ_GET,"http://jabber.org/protocol/disco#items"); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
255 xmlnode *query = xmlnode_get_child_with_namespace(iq->node,"query","http://jabber.org/protocol/disco#items"); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
256 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
257 xmlnode_set_attrib(iq->node,"to",js->user->domain); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
258 xmlnode_set_attrib(query,"node","http://jabber.org/protocol/commands"); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
259 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
260 jabber_iq_set_callback(iq,jabber_adhoc_server_got_list_cb,NULL); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
261 jabber_iq_send(iq); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
262 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
263 |
17884
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
264 void jabber_adhoc_execute(JabberStream *js, JabberAdHocCommands *cmd) { |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
265 JabberIq *iq = jabber_iq_new(js, JABBER_IQ_SET); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
266 xmlnode *command = xmlnode_new_child(iq->node,"command"); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
267 xmlnode_set_attrib(iq->node,"to",cmd->jid); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
268 xmlnode_set_namespace(command,"http://jabber.org/protocol/commands"); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
269 xmlnode_set_attrib(command,"node",cmd->node); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
270 xmlnode_set_attrib(command,"action","execute"); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
271 |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
272 jabber_iq_set_callback(iq,jabber_adhoc_parse,NULL); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
273 |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
274 jabber_iq_send(iq); |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
275 } |
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
276 |
19699
680a3aea5eb6
Various warning fixes for the xmpp prpl.
Daniel Atallah <daniel.atallah@gmail.com>
parents:
19698
diff
changeset
|
277 static void jabber_adhoc_server_execute(PurplePluginAction *action) { |
17883
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
278 JabberAdHocCommands *cmd = action->user_data; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
279 if(cmd) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
280 PurpleConnection *gc = (PurpleConnection *) action->context; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
281 JabberStream *js = gc->proto_data; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
282 |
17884
feac55968392
Now all ad-hoc commands have to be sent through jabber_adhoc_execute to be properly executed (including the form steps). This cleans up the code a bit, and avoids DOS attacks by flooding the client with malicious ad-hoc command forms that were not requested.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17883
diff
changeset
|
283 jabber_adhoc_execute(js, cmd); |
17883
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
284 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
285 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
286 |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
287 void jabber_adhoc_init_server_commands(JabberStream *js, GList **m) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
288 GList *cmdlst; |
18691
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
289 JabberBuddy *jb; |
17883
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
290 |
18691
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
291 /* also add commands for other clients connected to the same account on another resource */ |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
292 char *accountname = g_strdup_printf("%s@%s", js->user->node, js->user->domain); |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
293 if((jb = jabber_buddy_find(js, accountname, TRUE))) { |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
294 GList *iter; |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
295 for(iter = jb->resources; iter; iter = g_list_next(iter)) { |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
296 JabberBuddyResource *jbr = iter->data; |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
297 GList *riter; |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
298 for(riter = jbr->commands; riter; riter = g_list_next(riter)) { |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
299 JabberAdHocCommands *cmd = riter->data; |
18694
c72d2458b22e
Switched formatting of the ad-hoc commands to be less intimidating
Andreas Monitzer <pidgin@monitzer.com>
parents:
18691
diff
changeset
|
300 char *cmdname = g_strdup_printf("%s (%s)",cmd->name,jbr->name); |
18691
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
301 PurplePluginAction *act = purple_plugin_action_new(cmdname, jabber_adhoc_server_execute); |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
302 act->user_data = cmd; |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
303 *m = g_list_append(*m, act); |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
304 g_free(cmdname); |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
305 } |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
306 } |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
307 } |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
308 g_free(accountname); |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
309 |
54a5fbeadd7c
Now showing ad-hoc commands of other clients connected to the same account in the account menu (per XEP-0146). Since it is becoming messy in that menu, I also prefixed all ad-hoc commands with the node this command belongs to in [], which is the resource name for clients and the domain name for the server. Examples: "[home] Set status" for clients and "[jabber.org] Send message to all connected users" for servers.
Andreas Monitzer <pidgin@monitzer.com>
parents:
17904
diff
changeset
|
310 /* now add server commands */ |
17883
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
311 for(cmdlst = js->commands; cmdlst; cmdlst = g_list_next(cmdlst)) { |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
312 JabberAdHocCommands *cmd = cmdlst->data; |
18694
c72d2458b22e
Switched formatting of the ad-hoc commands to be less intimidating
Andreas Monitzer <pidgin@monitzer.com>
parents:
18691
diff
changeset
|
313 PurplePluginAction *act = purple_plugin_action_new(cmd->name, jabber_adhoc_server_execute); |
17883
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
314 act->user_data = cmd; |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
315 *m = g_list_append(*m, act); |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
316 } |
9a19c46adf66
The server's ad-hoc commands are now listed in the account's action menu. Note that this requires an additional field in the _PurplePluginAction struct. There's no other way, since there was no way to supply user_data, and dynamically created functions are not supported by C. This should be fine, since that struct is only malloced in purple_plugin_action_new, which is part of the core. Applications have to either pass the struct unmodified, or restore the user_data pointer if the action is recreated when necessary (as is the case in Adium).
Andreas Monitzer <pidgin@monitzer.com>
parents:
17882
diff
changeset
|
317 } |