annotate acinclude.m4 @ 32797:aacfb71133cc

Fix a possible MSN remote crash Incoming messages with certain characters or character encodings can cause clients to crash. The fix is for the contents of all incoming plaintext messages are converted to UTF-8 and validated before used. This was reported to us by Fabian Yamaguchi and this patch was written by Elliott Sales de Andrade (maybe with small, insignificant changes by me)

dnl Added by setup-gettext. Do not remove this
dnl unless you know what you are doing.
AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])

# Configure paths for GLIB
# Owen Taylor     1997-2001

dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or 
dnl gthread is specified in MODULES, pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GLIB_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
		    , enable_glibtest=yes)

  pkg_config_args=glib-2.0
  for module in . $4
  do
      case "$module" in
         gmodule) 
             pkg_config_args="$pkg_config_args gmodule-2.0"
         ;;
         gobject) 
             pkg_config_args="$pkg_config_args gobject-2.0"
         ;;
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  no_glib=""

  if test x$PKG_CONFIG != xno ; then
    if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo *** pkg-config too old; version 0.7 or better required.
      no_glib=yes
      PKG_CONFIG=no
    fi
  else
    no_glib=yes
  fi

  min_glib_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
	  enable_glibtest=no
    fi

    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
	  :
    else
	  no_glib=yes
    fi
  fi

  if test x"$no_glib" = x ; then
    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`

    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.glibtest
      AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          ac_save_CFLAGS="$CFLAGS"
          ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     GLIB_GENMARSHAL=""
     GOBJECT_QUERY=""
     GLIB_MKENUMS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GLIB_CFLAGS)
  AC_SUBST(GLIB_LIBS)
  AC_SUBST(GLIB_GENMARSHAL)
  AC_SUBST(GOBJECT_QUERY)
  AC_SUBST(GLIB_MKENUMS)
  rm -f conf.glibtest
])
# Configure paths for GTK+
# Owen Taylor     1997-2001

dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, 
dnl pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GTK_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run a test GTK+ program],
		    , enable_gtktest=yes)

  pkg_config_args=gtk+-2.0
  for module in . $4
  do
      case "$module" in
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  no_gtk=""

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  if test x$PKG_CONFIG != xno ; then
    if pkg-config --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo *** pkg-config too old; version 0.7 or better required.
      no_gtk=yes
      PKG_CONFIG=no
    fi
  else
    no_gtk=yes
  fi

  min_gtk_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
	  enable_gtktest=no
    fi

    if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
	  :
    else
	  no_gtk=yes
    fi
  fi

  if test x"$no_gtk" = x ; then
    GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
    GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.gtktest
      AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://pkgconfig.sourceforge.net"
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK+ test program, checking why..."
	  ac_save_CFLAGS="$CFLAGS"
	  ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
          echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])

dnl ac_var_timeszone_externals.m4

# Define 'timezone', 'altzone' and 'daylight'
# http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html
# Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the
# the external timezone variables 'timezone', 'altzone' and 'daylight' exist,
# defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively
# (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE').
# Mark R.Bannister <[e-mail]>
AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS],
[  AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl
   AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone,
   [  AC_TRY_LINK([#include <time.h>], [return (int)timezone;],
         mb_cv_var_timezone=yes,
         mb_cv_var_timezone=no)
   ])
   AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone,
   [  AC_TRY_LINK([#include <time.h>], [return (int)altzone;],
         mb_cv_var_altzone=yes,
         mb_cv_var_altzone=no)
   ])
   AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight,
   [  AC_TRY_LINK([#include <time.h>], [return (int)daylight;],
         mb_cv_var_daylight=yes,
         mb_cv_var_daylight=no)
   ])
   if test $mb_cv_var_timezone = yes; then
      AC_DEFINE([HAVE_TIMEZONE], 1,
              [Define if you have the external 'timezone' variable.])
   fi
   if test $mb_cv_var_altzone = yes; then
      AC_DEFINE([HAVE_ALTZONE], 1,
              [Define if you have the external 'altzone' variable.])
   fi
   if test $mb_cv_var_daylight = yes; then
      AC_DEFINE([HAVE_DAYLIGHT], 1,
              [Define if you have the external 'daylight' variable.])
   fi
])

dnl Available from the GNU Autoconf Macro Archive at:
dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html
dnl
AC_DEFUN([AC_PROG_PERL_MODULES],[dnl
ac_perl_modules="$1"
# Make sure we have perl
if test -z "$PERL"; then
AC_CHECK_PROG(PERL,perl,perl)
fi

if test "x$PERL" != x; then
  ac_perl_modules_failed=0
  for ac_perl_module in $ac_perl_modules; do
    AC_MSG_CHECKING(for perl module $ac_perl_module)

    # Would be nice to log result here, but can't rely on autoconf internals
    $PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1
    if test $? -ne 0; then
      AC_MSG_RESULT(no);
      ac_perl_modules_failed=1
   else
      AC_MSG_RESULT(ok);
    fi
  done

  # Run optional shell commands
  if test "$ac_perl_modules_failed" = 0; then
    :
    $2
  else
    :
    $3
  fi
else
  AC_MSG_WARN(could not find perl)
fi])dnl


dnl AM_GCONF_SOURCE_2
dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas
dnl  (i.e. pass to gconftool-2
dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where
dnl  you should install foo.schemas files
dnl

AC_DEFUN([AM_GCONF_SOURCE_2],
[
  if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then
    GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source`
  else
    GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE
  fi

  AC_ARG_WITH(gconf-source, 
  [  --with-gconf-source=sourceaddress      Config database for installing schema files.],GCONF_SCHEMA_CONFIG_SOURCE="$withval",)

  AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE)
  AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation])

  if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then
    GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas'
  fi

  AC_ARG_WITH(gconf-schema-file-dir, 
  [  --with-gconf-schema-file-dir=dir        Directory for installing schema files.],GCONF_SCHEMA_FILE_DIR="$withval",)

  AC_SUBST(GCONF_SCHEMA_FILE_DIR)
  AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files])

  AC_ARG_ENABLE(schemas-install,
     [  --disable-schemas-install	Disable the schemas installation],
     [case ${enableval} in
       yes|no) ;;
       *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;;
      esac])
  AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no])
])