annotate acinclude.m4 @ 14511:f309a5b3f184

[gaim-migrate @ 17231] Switched from using libdbi to using sqlite3. Results in easier configuration (no need to setup database server/create database/add tables). Also Gtk Gaim no longer needs to link against libdbi. This should make the plugin more easily distributable and thus hopefully it can be included in binary releases of Gaim (fingers crossed). committer: Tailor Script <[e-mail]>

dnl Added by setup-gettext. Do not remove this
dnl unless you know what you are doing.
AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])

# Configure paths for GLIB
# Owen Taylor     1997-2001

dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or 
dnl gthread is specified in MODULES, pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GLIB_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
		    , enable_glibtest=yes)

  pkg_config_args=glib-2.0
  for module in . $4
  do
      case "$module" in
         gmodule) 
             pkg_config_args="$pkg_config_args gmodule-2.0"
         ;;
         gobject) 
             pkg_config_args="$pkg_config_args gobject-2.0"
         ;;
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  no_glib=""

  if test x$PKG_CONFIG != xno ; then
    if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo *** pkg-config too old; version 0.7 or better required.
      no_glib=yes
      PKG_CONFIG=no
    fi
  else
    no_glib=yes
  fi

  min_glib_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
	  enable_glibtest=no
    fi

    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
	  :
    else
	  no_glib=yes
    fi
  fi

  if test x"$no_glib" = x ; then
    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`

    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.glibtest
      AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          ac_save_CFLAGS="$CFLAGS"
          ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     GLIB_GENMARSHAL=""
     GOBJECT_QUERY=""
     GLIB_MKENUMS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GLIB_CFLAGS)
  AC_SUBST(GLIB_LIBS)
  AC_SUBST(GLIB_GENMARSHAL)
  AC_SUBST(GOBJECT_QUERY)
  AC_SUBST(GLIB_MKENUMS)
  rm -f conf.glibtest
])
# Configure paths for GTK+
# Owen Taylor     1997-2001

dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, 
dnl pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GTK_2_0],
[dnl 
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(gtktest, [  --disable-gtktest       do not try to compile and run a test GTK+ program],
		    , enable_gtktest=yes)

  pkg_config_args=gtk+-2.0
  for module in . $4
  do
      case "$module" in
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  no_gtk=""

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  if test x$PKG_CONFIG != xno ; then
    if pkg-config --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo *** pkg-config too old; version 0.7 or better required.
      no_gtk=yes
      PKG_CONFIG=no
    fi
  else
    no_gtk=yes
  fi

  min_gtk_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
	  enable_gtktest=no
    fi

    if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
	  :
    else
	  no_gtk=yes
    fi
  fi

  if test x"$no_gtk" = x ; then
    GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
    GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.gtktest
      AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://pkgconfig.sourceforge.net"
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK+ test program, checking why..."
	  ac_save_CFLAGS="$CFLAGS"
	  ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
          echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])

dnl This is XIPH_PATH_AO renamed to GAIM_PATH_AO to prevent conflicts.
dnl It's a long story.  --elb

# ao.m4
# Configure paths for libao
# Jack Moffitt <[e-mail]> 10-21-2000
# Shamelessly stolen from Owen Taylor and Manish Singh

dnl GAIM_PATH_AO([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl Test for libao, and define AO_CFLAGS and AO_LIBS
dnl
AC_DEFUN([GAIM_PATH_AO],
[dnl 
dnl Get the cflags and libraries
dnl
AC_ARG_WITH(ao,[  --with-ao=PFX   Prefix where libao is installed (optional)], ao_prefix="$withval", ao_prefix="")
AC_ARG_WITH(ao-libraries,[  --with-ao-libraries=DIR   Directory where libao library is installed (optional)], ao_libraries="$withval", ao_libraries="")
AC_ARG_WITH(ao-includes,[  --with-ao-includes=DIR   Directory where libao header files are installed (optional)], ao_includes="$withval", ao_includes="")
AC_ARG_ENABLE(aotest, [  --disable-aotest       Do not try to compile and run a test ao program],, enable_aotest=yes)


  if test "x$ao_libraries" != "x" ; then
    AO_LIBS="-L$ao_libraries"
  elif test "x$ao_prefix" != "x"; then
    AO_LIBS="-L$ao_prefix/lib"
  elif test "x$prefix" != "xNONE"; then
    AO_LIBS="-L$prefix/lib"
  fi

  if test "x$ao_includes" != "x" ; then
    AO_CFLAGS="-I$ao_includes"
  elif test "x$ao_prefix" != "x"; then
    AO_CFLAGS="-I$ao_prefix/include"
  elif test "x$prefix" != "xNONE"; then
    AO_CFLAGS="-I$prefix/include"
  fi

  # see where dl* and friends live
  AC_CHECK_FUNCS(dlopen, [AO_DL_LIBS=""], [
    AC_CHECK_LIB(dl, dlopen, [AO_DL_LIBS="-ldl"], [
      AC_MSG_WARN([could not find dlopen() needed by libao sound drivers
      your system may not be supported.])
    ])
  ])

  AO_LIBS="$AO_LIBS -lao $AO_DL_LIBS"

  AC_MSG_CHECKING(for ao)
  no_ao=""


  if test "x$enable_aotest" = "xyes" ; then
    ac_save_CFLAGS="$CFLAGS"
    ac_save_LIBS="$LIBS"
    CFLAGS="$CFLAGS $AO_CFLAGS"
    LIBS="$LIBS $AO_LIBS"
dnl
dnl Now check if the installed ao is sufficiently new.
dnl
      rm -f conf.aotest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ao/ao.h>

int main ()
{
  system("touch conf.aotest");
  return 0;
}

],, no_ao=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
  fi

  if test "x$no_ao" = "x" ; then
     AC_MSG_RESULT(yes)
     ifelse([$1], , :, [$1])     
  else
     AC_MSG_RESULT(no)
     if test -f conf.aotest ; then
       :
     else
       echo "*** Could not run ao test program, checking why..."
       CFLAGS="$CFLAGS $AO_CFLAGS"
       LIBS="$LIBS $AO_LIBS"
       AC_TRY_LINK([
#include <stdio.h>
#include <ao/ao.h>
],     [ return 0; ],
       [ echo "*** The test program compiled, but did not run. This usually means"
       echo "*** that the run-time linker is not finding ao or finding the wrong"
       echo "*** version of ao. If it is not finding ao, you'll need to set your"
       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
       echo "*** is required on your system"
       echo "***"
       echo "*** If you have an old version installed, it is best to remove it, although"
       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
       [ echo "*** The test program failed to compile or link. See the file config.log for the"
       echo "*** exact error that occurred. This usually means ao was incorrectly installed"
       echo "*** or that you have moved ao since it was installed." ])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
     AO_CFLAGS=""
     AO_LIBS=""
     ifelse([$2], , :, [$2])
  fi
  AC_SUBST(AO_CFLAGS)
  AC_SUBST(AO_LIBS)
  rm -f conf.aotest
])

dnl audiofile.m4, included here for those people who don't have audiofile
dnl installed but would like to build CVS.

# Configure paths for the Audio File Library
# Bertrand Guiheneuf 98-10-21
# stolen from esd.m4 in esound :
# Manish Singh    98-9-30
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for Audio File Library, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS.
dnl
AC_DEFUN([AM_PATH_AUDIOFILE],
[dnl 
dnl Get compiler flags and libraries from the audiofile-config script.
dnl
AC_ARG_WITH(audiofile-prefix,[  --with-audiofile-prefix=PFX   Prefix where Audio File Library is installed (optional)],
            audiofile_prefix="$withval", audiofile_prefix="")
AC_ARG_WITH(audiofile-exec-prefix,[  --with-audiofile-exec-prefix=PFX Exec prefix where Audio File Library is installed (optional)],
            audiofile_exec_prefix="$withval", audiofile_exec_prefix="")
AC_ARG_ENABLE(audiofiletest, [  --disable-audiofiletest       Do not try to compile and run a test Audio File Library program], , enable_audiofiletest=yes)

  if test x$audiofile_exec_prefix != x ; then
     audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix"
     if test x${AUDIOFILE_CONFIG+set} != xset ; then
        AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config
     fi
  fi
  if test x$audiofile_prefix != x ; then
     audiofile_args="$audiofile_args --prefix=$audiofile_prefix"
     if test x${AUDIOFILE_CONFIG+set} != xset ; then
        AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config
     fi
  fi

  AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no)
  min_audiofile_version=ifelse([$1], ,0.2.5,$1)
  AC_MSG_CHECKING(for Audio File Library - version >= $min_audiofile_version)
  no_audiofile=""
  if test "$AUDIOFILE_CONFIG" = "no" ; then
    no_audiofile=yes
  else
    AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs`
    AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags`
    audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_audiofiletest" = "xyes" ; then
      AC_LANG_SAVE
      AC_LANG_C
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
      LIBS="$LIBS $AUDIOFILE_LIBS"
dnl
dnl Now check if the installed Audio File Library is sufficiently new. 
dnl (Also checks the sanity of the results of audiofile-config to some extent.)
dnl
      rm -f conf.audiofiletest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <audiofile.h>

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.audiofiletest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_audiofile_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_audiofile_version");
     exit(1);
   }

   if (($audiofile_major_version > major) ||
      (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) ||
      (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version);
      printf("*** of the Audio File Library required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n");
      printf("*** to point to the correct copy of audiofile-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
       AC_LANG_RESTORE
     fi
  fi
  if test "x$no_audiofile" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$AUDIOFILE_CONFIG" = "no" ; then
       cat <<END
*** The audiofile-config script installed by the Audio File Library could
*** not be found.  If the Audio File Library was installed in PREFIX, make
*** sure PREFIX/bin is in your path, or set the AUDIOFILE_CONFIG
*** environment variable to the full path to audiofile-config.
END
     else
       if test -f conf.audiofiletest ; then
        :
       else
          echo "*** Could not run Audio File Library test program; checking why..."
          AC_LANG_SAVE
          AC_LANG_C
          CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
          LIBS="$LIBS $AUDIOFILE_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include <audiofile.h>
],      [ return 0; ],
        [ cat <<END
*** The test program compiled, but did not run.  This usually means that
*** the run-time linker is not finding Audio File Library or finding the
*** wrong version of Audio File Library.
***
*** If it is not finding Audio File Library, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location.  Also, make sure you have run ldconfig if
*** that is required on your system.
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying
*** LD_LIBRARY_PATH.
END
        ],
        [ echo "*** The test program failed to compile or link. See the file config.log"
          echo "*** for the exact error that occurred. This usually means the Audio File"
          echo "*** Library was incorrectly installed or that you have moved the Audio"
          echo "*** File Library since it was installed. In the latter case, you may want"
          echo "*** to edit the audiofile-config script: $AUDIOFILE_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
          AC_LANG_RESTORE
       fi
     fi
     AUDIOFILE_CFLAGS=""
     AUDIOFILE_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(AUDIOFILE_CFLAGS)
  AC_SUBST(AUDIOFILE_LIBS)
  rm -f conf.audiofiletest
])

dnl ac_var_timeszone_externals.m4

# Define 'timezone', 'altzone' and 'daylight'
# http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html
# Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the
# the external timezone variables 'timezone', 'altzone' and 'daylight' exist,
# defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively
# (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE').
# Mark R.Bannister <[e-mail]>
AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS],
[  AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl
   AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone,
   [  AC_TRY_LINK([#include <time.h>], [return (int)timezone;],
         mb_cv_var_timezone=yes,
         mb_cv_var_timezone=no)
   ])
   AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone,
   [  AC_TRY_LINK([#include <time.h>], [return (int)altzone;],
         mb_cv_var_altzone=yes,
         mb_cv_var_altzone=no)
   ])
   AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight,
   [  AC_TRY_LINK([#include <time.h>], [return (int)daylight;],
         mb_cv_var_daylight=yes,
         mb_cv_var_daylight=no)
   ])
   if test $mb_cv_var_timezone = yes; then
      AC_DEFINE([HAVE_TIMEZONE], 1,
              [Define if you have the external 'timezone' variable.])
   fi
   if test $mb_cv_var_altzone = yes; then
      AC_DEFINE([HAVE_ALTZONE], 1,
              [Define if you have the external 'altzone' variable.])
   fi
   if test $mb_cv_var_daylight = yes; then
      AC_DEFINE([HAVE_DAYLIGHT], 1,
              [Define if you have the external 'daylight' variable.])
   fi
])

dnl Available from the GNU Autoconf Macro Archive at:
dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html
dnl
AC_DEFUN([AC_PROG_PERL_MODULES],[dnl
ac_perl_modules="$1"
# Make sure we have perl
if test -z "$PERL"; then
AC_CHECK_PROG(PERL,perl,perl)
fi

if test "x$PERL" != x; then
  ac_perl_modules_failed=0
  for ac_perl_module in $ac_perl_modules; do
    AC_MSG_CHECKING(for perl module $ac_perl_module)

    # Would be nice to log result here, but can't rely on autoconf internals
    $PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1
    if test $? -ne 0; then
      AC_MSG_RESULT(no);
      ac_perl_modules_failed=1
   else
      AC_MSG_RESULT(ok);
    fi
  done

  # Run optional shell commands
  if test "$ac_perl_modules_failed" = 0; then
    :
    $2
  else
    :
    $3
  fi
else
  AC_MSG_WARN(could not find perl)
fi])dnl


dnl This file scares me...
# Check for binary relocation support
# Hongli Lai
# http://autopackage.org/

AC_DEFUN([AM_BINRELOC],
[
	AC_ARG_ENABLE(binreloc,
		[  --enable-binreloc       compile with binary relocation support
                          (default=enable when available)],
		enable_binreloc=$enableval,enable_binreloc=auto)

	BINRELOC_CFLAGS=
	BINRELOC_LIBS=
	if test "x$enable_binreloc" = "xauto"; then
		AC_CACHE_CHECK([whether everything is installed to the same prefix],
			       [br_cv_valid_prefixes], [
				if test "$bindir" = '${exec_prefix}/bin' -a "$sbindir" = '${exec_prefix}/sbin' -a \
					"$datadir" = '${prefix}/share' -a "$libdir" = '${exec_prefix}/lib' -a \
					"$libexecdir" = '${exec_prefix}/libexec' -a "$sysconfdir" = '${prefix}/etc'
				then
					br_cv_valid_prefixes=yes
				else
					br_cv_valid_prefixes=no
				fi
				])
	fi
	AC_CACHE_CHECK([whether binary relocation support should be enabled],
		       [br_cv_binreloc],
		       [if test "x$enable_binreloc" = "xyes"; then
		       	       br_cv_binreloc=yes
		       elif test "x$enable_binreloc" = "xauto"; then
			       if test "x$br_cv_valid_prefixes" = "xyes"; then
				       br_cv_binreloc=yes
			       else
				       br_cv_binreloc=no
			       fi
		       else
			       br_cv_binreloc=no
		       fi])

	if test "x$br_cv_binreloc" = "xyes"; then
		BINRELOC_CFLAGS="-DENABLE_BINRELOC"
		AC_DEFINE(ENABLE_BINRELOC,,[Use binary relocation?])
	fi
	AC_SUBST(BINRELOC_CFLAGS)
	AC_SUBST(BINRELOC_LIBS)
])