Mercurial > pidgin
comparison m4/esd.m4 @ 12023:80faf1ca5280
[gaim-migrate @ 14316]
boo
committer: Tailor Script <tailor@pidgin.im>
author | Sean Egan <seanegan@gmail.com> |
---|---|
date | Wed, 09 Nov 2005 07:58:36 +0000 |
parents | 68b230f8da5f |
children |
comparison
equal
deleted
inserted
replaced
12022:9d562dde0a3a | 12023:80faf1ca5280 |
---|---|
1 # Configure paths for ESD | |
2 # Manish Singh 98-9-30 | |
3 # stolen back from Frank Belew | |
4 # stolen from Manish Singh | |
5 # Shamelessly stolen from Owen Taylor | |
6 | |
7 dnl AM_PATH_GESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) | |
8 dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS | |
9 dnl | |
10 AC_DEFUN(AM_PATH_GESD, | |
11 [dnl | |
12 dnl Get the cflags and libraries from the esd-config script | |
13 dnl | |
14 AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], | |
15 esd_prefix="$withval", esd_prefix="") | |
16 AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], | |
17 esd_exec_prefix="$withval", esd_exec_prefix="") | |
18 AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], | |
19 , enable_esdtest=yes) | |
20 | |
21 if test x$esd_exec_prefix != x ; then | |
22 esd_args="$esd_args --exec-prefix=$esd_exec_prefix" | |
23 if test x${ESD_CONFIG+set} != xset ; then | |
24 ESD_CONFIG=$esd_exec_prefix/bin/esd-config | |
25 fi | |
26 fi | |
27 if test x$esd_prefix != x ; then | |
28 esd_args="$esd_args --prefix=$esd_prefix" | |
29 if test x${ESD_CONFIG+set} != xset ; then | |
30 ESD_CONFIG=$esd_prefix/bin/esd-config | |
31 fi | |
32 fi | |
33 | |
34 AC_PATH_PROG(ESD_CONFIG, esd-config, no) | |
35 min_esd_version=ifelse([$1], ,0.2.7,$1) | |
36 AC_MSG_CHECKING(for ESD - version >= $min_esd_version) | |
37 no_esd="" | |
38 if test "$ESD_CONFIG" = "no" ; then | |
39 no_esd=yes | |
40 else | |
41 ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` | |
42 ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` | |
43 | |
44 esd_major_version=`$ESD_CONFIG $esd_args --version | \ | |
45 sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` | |
46 esd_minor_version=`$ESD_CONFIG $esd_args --version | \ | |
47 sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` | |
48 esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ | |
49 sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` | |
50 if test "x$enable_esdtest" = "xyes" ; then | |
51 ac_save_CFLAGS="$CFLAGS" | |
52 ac_save_LIBS="$LIBS" | |
53 CFLAGS="$CFLAGS $ESD_CFLAGS" | |
54 LIBS="$LIBS $ESD_LIBS" | |
55 dnl | |
56 dnl Now check if the installed ESD is sufficiently new. (Also sanity | |
57 dnl checks the results of esd-config to some extent | |
58 dnl | |
59 rm -f conf.esdtest | |
60 AC_TRY_RUN([ | |
61 #include <stdio.h> | |
62 #include <stdlib.h> | |
63 #include <string.h> | |
64 #include <esd.h> | |
65 | |
66 char* | |
67 my_strdup (char *str) | |
68 { | |
69 char *new_str; | |
70 | |
71 if (str) | |
72 { | |
73 new_str = malloc ((strlen (str) + 1) * sizeof(char)); | |
74 strcpy (new_str, str); | |
75 } | |
76 else | |
77 new_str = NULL; | |
78 | |
79 return new_str; | |
80 } | |
81 | |
82 int main () | |
83 { | |
84 int major, minor, micro; | |
85 char *tmp_version; | |
86 | |
87 system ("touch conf.esdtest"); | |
88 | |
89 /* HP/UX 9 (%@#!) writes to sscanf strings */ | |
90 tmp_version = my_strdup("$min_esd_version"); | |
91 if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { | |
92 printf("%s, bad version string\n", "$min_esd_version"); | |
93 exit(1); | |
94 } | |
95 | |
96 if (($esd_major_version > major) || | |
97 (($esd_major_version == major) && ($esd_minor_version > minor)) || | |
98 (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) | |
99 { | |
100 return 0; | |
101 } | |
102 else | |
103 { | |
104 printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); | |
105 printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); | |
106 printf("*** best to upgrade to the required version.\n"); | |
107 printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); | |
108 printf("*** to point to the correct copy of esd-config, and remove the file\n"); | |
109 printf("*** config.cache before re-running configure\n"); | |
110 return 1; | |
111 } | |
112 } | |
113 | |
114 ],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) | |
115 CFLAGS="$ac_save_CFLAGS" | |
116 LIBS="$ac_save_LIBS" | |
117 fi | |
118 fi | |
119 if test "x$no_esd" = x ; then | |
120 AC_MSG_RESULT(yes) | |
121 ifelse([$2], , :, [$2]) | |
122 else | |
123 AC_MSG_RESULT(no) | |
124 if test "$ESD_CONFIG" = "no" ; then | |
125 echo "*** The esd-config script installed by ESD could not be found" | |
126 echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" | |
127 echo "*** your path, or set the ESD_CONFIG environment variable to the" | |
128 echo "*** full path to esd-config." | |
129 else | |
130 if test -f conf.esdtest ; then | |
131 : | |
132 else | |
133 echo "*** Could not run ESD test program, checking why..." | |
134 CFLAGS="$CFLAGS $ESD_CFLAGS" | |
135 LIBS="$LIBS $ESD_LIBS" | |
136 AC_TRY_LINK([ | |
137 #include <stdio.h> | |
138 #include <esd.h> | |
139 ], [ return 0; ], | |
140 [ echo "*** The test program compiled, but did not run. This usually means" | |
141 echo "*** that the run-time linker is not finding ESD or finding the wrong" | |
142 echo "*** version of ESD. If it is not finding ESD, you'll need to set your" | |
143 echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" | |
144 echo "*** to the installed location Also, make sure you have run ldconfig if that" | |
145 echo "*** is required on your system" | |
146 echo "***" | |
147 echo "*** If you have an old version installed, it is best to remove it, although" | |
148 echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], | |
149 [ echo "*** The test program failed to compile or link. See the file config.log for the" | |
150 echo "*** exact error that occured. This usually means ESD was incorrectly installed" | |
151 echo "*** or that you have moved ESD since it was installed. In the latter case, you" | |
152 echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) | |
153 CFLAGS="$ac_save_CFLAGS" | |
154 LIBS="$ac_save_LIBS" | |
155 fi | |
156 fi | |
157 ESD_CFLAGS="" | |
158 ESD_LIBS="" | |
159 ifelse([$3], , :, [$3]) | |
160 fi | |
161 AC_SUBST(ESD_CFLAGS) | |
162 AC_SUBST(ESD_LIBS) | |
163 rm -f conf.esdtest | |
164 ]) |