Mercurial > pidgin
view INSTALL @ 32507:29e9fe5b9264
Pluck fixes for OIM charset conversion.
*** Plucked rev 3053d6a37cc6d8774aba7607b992a4408216adcd (thijsalkemade@gmail.com):
MSN Patch from Thijs (xnyhps) Alkemade which do verify/convert to UTF-8
incoming OIM.
Fixes #14884
*** Plucked rev ecabfaee8a1ca02e18ebadbb41cdcce19e78bc2e (masca@cpw.pidgin.im):
Apply second patch from xnyhps this time to show the message salvaged to user.
Refs #14884
*** Plucked rev b1b8c222ab921963f43e83502b6c6e2e4489a8c4 (qulogic@pidgin.im):
Add newlines to debug messages, and word-wrap lines.
*** Plucked rev fdb56683f2b5f88f7b388aaef6c53c810d19e374 (qulogic@pidgin.im):
We know the length of decode_msg here.
*** Plucked rev f12c9f6a6c31bcd3512f162209285a88a86595ff (qulogic@pidgin.im):
This extra if-level can be dropped.
author | Elliott Sales de Andrade <qulogic@pidgin.im> |
---|---|
date | Mon, 06 Feb 2012 22:42:32 +0000 |
parents | 5ab7766a6c83 |
children |
line wrap: on
line source
Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. If it finishes successfully, it will print out of a summary of the build options. This summary will also appear in the help->about dialog. 2. Type `make' to compile the package. On some systems, you may need to use `gmake' instead. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. You must have write access to the prefix you are installing to. See below for more details on the prefix. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 6. If you have *not* run make distclean, you can use the target `make uninstall` to remove the files installed by `make install`. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. By default both the GTK+ UI (Pidgin) and the ncurses UI (Finch) will be built, assuming that configure finds the necessary libraries and headers for each. You can disable the GTK+ UI with `--disable-gtkui' and the ncurses UI with `--disable-consoleui'. `--disable-screensaver' will build libpurple without support for detecting when it should mark accounts idle based on mouse or keyboard usage. `--disable-sm' will build without support for the X session management. Doing so will remove the ability to have pidgin start up with your window manager. `--disable-gtkspell' will remove the ability to highlight misspelled words. `--disable-gevolution' will cause the evolution integration plugin not to compile. `--disable-gstreamer' will build without sound support. This applies to *both* Pidgin and Finch. `--enable-gnutls=yes,no' will enable or disable the use of gnutls for ssl support. Disabling both gnutls and nss will mean you cannot use either MSN or Google Talk. There is no static option for gnutls at this time. `--enable-nss=yes,no,static' will enable or disable the use of nss for ssl support. This is the only option for ssl support if you are attempting to compile a static version of Pidgin or Finch. Optional Packages: `--with-silc-includes=DIR' and `--with-silc-libs=DIR' can be used if your silc libraries are installed to a location not in your path. `--with-static-prpls' takes a list of comma separated protocols to build in statically (rather than as plugins). Use this with care. `--with-dynamic-prpls' takes a list of comma separated protocols also. If used only those listed will be built. If no protocols are listed with either `--with-static-prpls' or with `--with-dynamic-prpls' then Pidgin and Finch will be effectively useless. If configure does not find python, it will build without DBUS support. This will disable scripts such as purple-remote and purple-uri-handler, effectively disabling integration with the browser. You can tell configure where your python binary is located with `--with-python=PATH' Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. Many of these are related to having various optional libaries installed to locations outside of your path.