Mercurial > pidgin
view acinclude.m4 @ 12804:86d67bd4ef24
[gaim-migrate @ 15151]
I believe this fixes the "attempt to free unreferenced scalar" messages that
everyone was getting and doesn't seem to break anything else. Will Thompson
said it worked for him, so that's at least two of us. Let me know if this
breaks things for anyone.
committer: Tailor Script <tailor@pidgin.im>
| author | Etan Reisner <pidgin@unreliablesource.net> |
|---|---|
| date | Tue, 10 Jan 2006 05:14:30 +0000 |
| parents | c1b72d397fd8 |
| children | 82b59abcaee4 |
line wrap: on
line source
dnl Added by setup-gettext. Do not remove this dnl unless you know what you are doing. AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) # Configure paths for GLIB # Owen Taylor 1997-2001 dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or dnl gthread is specified in MODULES, pass to pkg-config dnl AC_DEFUN([AM_PATH_GLIB_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], , enable_glibtest=yes) pkg_config_args=glib-2.0 for module in . $4 do case "$module" in gmodule) pkg_config_args="$pkg_config_args gmodule-2.0" ;; gobject) pkg_config_args="$pkg_config_args gobject-2.0" ;; gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done AC_PATH_PROG(PKG_CONFIG, pkg-config, no) no_glib="" if test x$PKG_CONFIG != xno ; then if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_glib=yes PKG_CONFIG=no fi else no_glib=yes fi min_glib_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" enable_glibtest=no fi if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then : else no_glib=yes fi fi if test x"$no_glib" = x ; then GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" dnl dnl Now check if the installed GLIB is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.glibtest AC_TRY_RUN([ #include <glib.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://www.freedesktop.org/software/pkgconfig/" else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" AC_TRY_LINK([ #include <glib.h> #include <stdio.h> ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" GLIB_GENMARSHAL="" GOBJECT_QUERY="" GLIB_MKENUMS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) AC_SUBST(GLIB_GENMARSHAL) AC_SUBST(GOBJECT_QUERY) AC_SUBST(GLIB_MKENUMS) rm -f conf.glibtest ]) # Configure paths for GTK+ # Owen Taylor 1997-2001 dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, dnl pass to pkg-config dnl AC_DEFUN([AM_PATH_GTK_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], , enable_gtktest=yes) pkg_config_args=gtk+-2.0 for module in . $4 do case "$module" in gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done no_gtk="" AC_PATH_PROG(PKG_CONFIG, pkg-config, no) if test x$PKG_CONFIG != xno ; then if pkg-config --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_gtk=yes PKG_CONFIG=no fi else no_gtk=yes fi min_gtk_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" enable_gtktest=no fi if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then : else no_gtk=yes fi fi if test x"$no_gtk" = x ; then GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK+ is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.gtktest AC_TRY_RUN([ #include <gtk/gtk.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else echo "*** Could not run GTK+ test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include <gtk/gtk.h> #include <stdio.h> ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK+ or finding the wrong" echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) dnl This is XIPH_PATH_AO renamed to GAIM_PATH_AO to prevent conflicts. dnl It's a long story. --elb # ao.m4 # Configure paths for libao # Jack Moffitt <jack@icecast.org> 10-21-2000 # Shamelessly stolen from Owen Taylor and Manish Singh dnl GAIM_PATH_AO([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) dnl Test for libao, and define AO_CFLAGS and AO_LIBS dnl AC_DEFUN([GAIM_PATH_AO], [dnl dnl Get the cflags and libraries dnl AC_ARG_WITH(ao,[ --with-ao=PFX Prefix where libao is installed (optional)], ao_prefix="$withval", ao_prefix="") AC_ARG_WITH(ao-libraries,[ --with-ao-libraries=DIR Directory where libao library is installed (optional)], ao_libraries="$withval", ao_libraries="") AC_ARG_WITH(ao-includes,[ --with-ao-includes=DIR Directory where libao header files are installed (optional)], ao_includes="$withval", ao_includes="") AC_ARG_ENABLE(aotest, [ --disable-aotest Do not try to compile and run a test ao program],, enable_aotest=yes) if test "x$ao_libraries" != "x" ; then AO_LIBS="-L$ao_libraries" elif test "x$ao_prefix" != "x"; then AO_LIBS="-L$ao_prefix/lib" elif test "x$prefix" != "xNONE"; then AO_LIBS="-L$prefix/lib" fi if test "x$ao_includes" != "x" ; then AO_CFLAGS="-I$ao_includes" elif test "x$ao_prefix" != "x"; then AO_CFLAGS="-I$ao_prefix/include" elif test "x$prefix" != "xNONE"; then AO_CFLAGS="-I$prefix/include" fi # see where dl* and friends live AC_CHECK_FUNCS(dlopen, [AO_DL_LIBS=""], [ AC_CHECK_LIB(dl, dlopen, [AO_DL_LIBS="-ldl"], [ AC_MSG_WARN([could not find dlopen() needed by libao sound drivers your system may not be supported.]) ]) ]) AO_LIBS="$AO_LIBS -lao $AO_DL_LIBS" AC_MSG_CHECKING(for ao) no_ao="" if test "x$enable_aotest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $AO_CFLAGS" LIBS="$LIBS $AO_LIBS" dnl dnl Now check if the installed ao is sufficiently new. dnl rm -f conf.aotest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <ao/ao.h> int main () { system("touch conf.aotest"); return 0; } ],, no_ao=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi if test "x$no_ao" = "x" ; then AC_MSG_RESULT(yes) ifelse([$1], , :, [$1]) else AC_MSG_RESULT(no) if test -f conf.aotest ; then : else echo "*** Could not run ao test program, checking why..." CFLAGS="$CFLAGS $AO_CFLAGS" LIBS="$LIBS $AO_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <ao/ao.h> ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding ao or finding the wrong" echo "*** version of ao. If it is not finding ao, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means ao was incorrectly installed" echo "*** or that you have moved ao since it was installed." ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi AO_CFLAGS="" AO_LIBS="" ifelse([$2], , :, [$2]) fi AC_SUBST(AO_CFLAGS) AC_SUBST(AO_LIBS) rm -f conf.aotest ]) dnl audiofile.m4, included here for those people who don't have audiofile dnl installed but would like to build CVS. # Configure paths for the Audio File Library # Bertrand Guiheneuf 98-10-21 # stolen from esd.m4 in esound : # Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for Audio File Library, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS. dnl AC_DEFUN([AM_PATH_AUDIOFILE], [dnl dnl Get compiler flags and libraries from the audiofile-config script. dnl AC_ARG_WITH(audiofile-prefix,[ --with-audiofile-prefix=PFX Prefix where Audio File Library is installed (optional)], audiofile_prefix="$withval", audiofile_prefix="") AC_ARG_WITH(audiofile-exec-prefix,[ --with-audiofile-exec-prefix=PFX Exec prefix where Audio File Library is installed (optional)], audiofile_exec_prefix="$withval", audiofile_exec_prefix="") AC_ARG_ENABLE(audiofiletest, [ --disable-audiofiletest Do not try to compile and run a test Audio File Library program], , enable_audiofiletest=yes) if test x$audiofile_exec_prefix != x ; then audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix" if test x${AUDIOFILE_CONFIG+set} != xset ; then AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config fi fi if test x$audiofile_prefix != x ; then audiofile_args="$audiofile_args --prefix=$audiofile_prefix" if test x${AUDIOFILE_CONFIG+set} != xset ; then AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config fi fi AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no) min_audiofile_version=ifelse([$1], ,0.2.5,$1) AC_MSG_CHECKING(for Audio File Library - version >= $min_audiofile_version) no_audiofile="" if test "$AUDIOFILE_CONFIG" = "no" ; then no_audiofile=yes else AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs` AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags` audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_audiofiletest" = "xyes" ; then AC_LANG_SAVE AC_LANG_C ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" LIBS="$LIBS $AUDIOFILE_LIBS" dnl dnl Now check if the installed Audio File Library is sufficiently new. dnl (Also checks the sanity of the results of audiofile-config to some extent.) dnl rm -f conf.audiofiletest AC_TRY_RUN([ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <audiofile.h> char* my_strdup (char *str) { char *new_str; if (str) { new_str = malloc ((strlen (str) + 1) * sizeof(char)); strcpy (new_str, str); } else new_str = NULL; return new_str; } int main () { int major, minor, micro; char *tmp_version; system ("touch conf.audiofiletest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = my_strdup("$min_audiofile_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_audiofile_version"); exit(1); } if (($audiofile_major_version > major) || (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) || (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro))) { return 0; } else { printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version); printf("*** of the Audio File Library required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n"); printf("*** to point to the correct copy of audiofile-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" AC_LANG_RESTORE fi fi if test "x$no_audiofile" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$AUDIOFILE_CONFIG" = "no" ; then cat <<END *** The audiofile-config script installed by the Audio File Library could *** not be found. If the Audio File Library was installed in PREFIX, make *** sure PREFIX/bin is in your path, or set the AUDIOFILE_CONFIG *** environment variable to the full path to audiofile-config. END else if test -f conf.audiofiletest ; then : else echo "*** Could not run Audio File Library test program; checking why..." AC_LANG_SAVE AC_LANG_C CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" LIBS="$LIBS $AUDIOFILE_LIBS" AC_TRY_LINK([ #include <stdio.h> #include <audiofile.h> ], [ return 0; ], [ cat <<END *** The test program compiled, but did not run. This usually means that *** the run-time linker is not finding Audio File Library or finding the *** wrong version of Audio File Library. *** *** If it is not finding Audio File Library, you'll need to set your *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point *** to the installed location. Also, make sure you have run ldconfig if *** that is required on your system. *** *** If you have an old version installed, it is best to remove it, although *** you may also be able to get things to work by modifying *** LD_LIBRARY_PATH. END ], [ echo "*** The test program failed to compile or link. See the file config.log" echo "*** for the exact error that occurred. This usually means the Audio File" echo "*** Library was incorrectly installed or that you have moved the Audio" echo "*** File Library since it was installed. In the latter case, you may want" echo "*** to edit the audiofile-config script: $AUDIOFILE_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" AC_LANG_RESTORE fi fi AUDIOFILE_CFLAGS="" AUDIOFILE_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(AUDIOFILE_CFLAGS) AC_SUBST(AUDIOFILE_LIBS) rm -f conf.audiofiletest ]) dnl ac_var_timeszone_externals.m4 # Define 'timezone', 'altzone' and 'daylight' # http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html # Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the # the external timezone variables 'timezone', 'altzone' and 'daylight' exist, # defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively # (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE'). # Mark R.Bannister <markb@freedomware.co.uk> AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS], [ AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone, [ AC_TRY_LINK([#include <time.h>], [return (int)timezone;], mb_cv_var_timezone=yes, mb_cv_var_timezone=no) ]) AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone, [ AC_TRY_LINK([#include <time.h>], [return (int)altzone;], mb_cv_var_altzone=yes, mb_cv_var_altzone=no) ]) AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight, [ AC_TRY_LINK([#include <time.h>], [return (int)daylight;], mb_cv_var_daylight=yes, mb_cv_var_daylight=no) ]) if test $mb_cv_var_timezone = yes; then AC_DEFINE([HAVE_TIMEZONE], 1, [Define if you have the external 'timezone' variable.]) fi if test $mb_cv_var_altzone = yes; then AC_DEFINE([HAVE_ALTZONE], 1, [Define if you have the external 'altzone' variable.]) fi if test $mb_cv_var_daylight = yes; then AC_DEFINE([HAVE_DAYLIGHT], 1, [Define if you have the external 'daylight' variable.]) fi ]) dnl Available from the GNU Autoconf Macro Archive at: dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html dnl AC_DEFUN([AC_PROG_PERL_MODULES],[dnl ac_perl_modules="$1" # Make sure we have perl if test -z "$PERL"; then AC_CHECK_PROG(PERL,perl,perl) fi if test "x$PERL" != x; then ac_perl_modules_failed=0 for ac_perl_module in $ac_perl_modules; do AC_MSG_CHECKING(for perl module $ac_perl_module) # Would be nice to log result here, but can't rely on autoconf internals $PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_RESULT(no); ac_perl_modules_failed=1 else AC_MSG_RESULT(ok); fi done # Run optional shell commands if test "$ac_perl_modules_failed" = 0; then : $2 else : $3 fi else AC_MSG_WARN(could not find perl) fi])dnl dnl This file scares me... # Check for binary relocation support # Hongli Lai # http://autopackage.org/ AC_DEFUN([AM_BINRELOC], [ AC_ARG_ENABLE(binreloc, [ --enable-binreloc compile with binary relocation support (default=enable when available)], enable_binreloc=$enableval,enable_binreloc=auto) BINRELOC_CFLAGS= BINRELOC_LIBS= if test "x$enable_binreloc" = "xauto"; then AC_CACHE_CHECK([whether everything is installed to the same prefix], [br_cv_valid_prefixes], [ if test "$bindir" = '${exec_prefix}/bin' -a "$sbindir" = '${exec_prefix}/sbin' -a \ "$datadir" = '${prefix}/share' -a "$libdir" = '${exec_prefix}/lib' -a \ "$libexecdir" = '${exec_prefix}/libexec' -a "$sysconfdir" = '${prefix}/etc' then br_cv_valid_prefixes=yes else br_cv_valid_prefixes=no fi ]) fi AC_CACHE_CHECK([whether binary relocation support should be enabled], [br_cv_binreloc], [if test "x$enable_binreloc" = "xyes"; then br_cv_binreloc=yes elif test "x$enable_binreloc" = "xauto"; then if test "x$br_cv_valid_prefixes" = "xyes"; then br_cv_binreloc=yes else br_cv_binreloc=no fi else br_cv_binreloc=no fi]) if test "x$br_cv_binreloc" = "xyes"; then BINRELOC_CFLAGS="-DENABLE_BINRELOC" AC_DEFINE(ENABLE_BINRELOC,,[Use binary relocation?]) fi AC_SUBST(BINRELOC_CFLAGS) AC_SUBST(BINRELOC_LIBS) ])