Mercurial > pidgin
view acinclude.m4 @ 22224:d1b36a8c920a
Change some g_idle_add(...) calls in libpurple to purple_timeout_add(0, ...)
We need to use the purple functions here so we can hook into mainloops
other than gtk, which is important for Adium. Felipe pointed out the call
in msnp9 and grep found the others.
| author | Mark Doliner <mark@kingant.net> |
|---|---|
| date | Sun, 27 Jan 2008 20:52:53 +0000 |
| parents | 0d4a41a50168 |
| children |
line wrap: on
line source
dnl Added by setup-gettext. Do not remove this dnl unless you know what you are doing. AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) # Configure paths for GLIB # Owen Taylor 1997-2001 dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or dnl gthread is specified in MODULES, pass to pkg-config dnl AC_DEFUN([AM_PATH_GLIB_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], , enable_glibtest=yes) pkg_config_args=glib-2.0 for module in . $4 do case "$module" in gmodule) pkg_config_args="$pkg_config_args gmodule-2.0" ;; gobject) pkg_config_args="$pkg_config_args gobject-2.0" ;; gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done AC_PATH_PROG(PKG_CONFIG, pkg-config, no) no_glib="" if test x$PKG_CONFIG != xno ; then if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_glib=yes PKG_CONFIG=no fi else no_glib=yes fi min_glib_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" enable_glibtest=no fi if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then : else no_glib=yes fi fi if test x"$no_glib" = x ; then GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" dnl dnl Now check if the installed GLIB is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.glibtest AC_TRY_RUN([ #include <glib.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://www.freedesktop.org/software/pkgconfig/" else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" AC_TRY_LINK([ #include <glib.h> #include <stdio.h> ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" GLIB_GENMARSHAL="" GOBJECT_QUERY="" GLIB_MKENUMS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) AC_SUBST(GLIB_GENMARSHAL) AC_SUBST(GOBJECT_QUERY) AC_SUBST(GLIB_MKENUMS) rm -f conf.glibtest ]) # Configure paths for GTK+ # Owen Taylor 1997-2001 dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, dnl pass to pkg-config dnl AC_DEFUN([AM_PATH_GTK_2_0], [dnl dnl Get the cflags and libraries from pkg-config dnl AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], , enable_gtktest=yes) pkg_config_args=gtk+-2.0 for module in . $4 do case "$module" in gthread) pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done no_gtk="" AC_PATH_PROG(PKG_CONFIG, pkg-config, no) if test x$PKG_CONFIG != xno ; then if pkg-config --atleast-pkgconfig-version 0.7 ; then : else echo *** pkg-config too old; version 0.7 or better required. no_gtk=yes PKG_CONFIG=no fi else no_gtk=yes fi min_gtk_version=ifelse([$1], ,2.0.0,$1) AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) if test x$PKG_CONFIG != xno ; then ## don't try to run the test against uninstalled libtool libs if $PKG_CONFIG --uninstalled $pkg_config_args; then echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" enable_gtktest=no fi if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then : else no_gtk=yes fi fi if test x"$no_gtk" = x ; then GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK+ is sufficiently new. (Also sanity dnl checks the results of pkg-config to some extent) dnl rm -f conf.gtktest AC_TRY_RUN([ #include <gtk/gtk.h> #include <stdio.h> #include <stdlib.h> int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); printf("*** to point to the correct configuration files\n"); } else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$PKG_CONFIG" = "no" ; then echo "*** A new enough version of pkg-config was not found." echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else echo "*** Could not run GTK+ test program, checking why..." ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include <gtk/gtk.h> #include <stdio.h> ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK+ or finding the wrong" echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) dnl ac_var_timeszone_externals.m4 # Define 'timezone', 'altzone' and 'daylight' # http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html # Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the # the external timezone variables 'timezone', 'altzone' and 'daylight' exist, # defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively # (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE'). # Mark R.Bannister <markb@freedomware.co.uk> AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS], [ AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone, [ AC_TRY_LINK([#include <time.h>], [return (int)timezone;], mb_cv_var_timezone=yes, mb_cv_var_timezone=no) ]) AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone, [ AC_TRY_LINK([#include <time.h>], [return (int)altzone;], mb_cv_var_altzone=yes, mb_cv_var_altzone=no) ]) AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight, [ AC_TRY_LINK([#include <time.h>], [return (int)daylight;], mb_cv_var_daylight=yes, mb_cv_var_daylight=no) ]) if test $mb_cv_var_timezone = yes; then AC_DEFINE([HAVE_TIMEZONE], 1, [Define if you have the external 'timezone' variable.]) fi if test $mb_cv_var_altzone = yes; then AC_DEFINE([HAVE_ALTZONE], 1, [Define if you have the external 'altzone' variable.]) fi if test $mb_cv_var_daylight = yes; then AC_DEFINE([HAVE_DAYLIGHT], 1, [Define if you have the external 'daylight' variable.]) fi ]) dnl Available from the GNU Autoconf Macro Archive at: dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html dnl AC_DEFUN([AC_PROG_PERL_MODULES],[dnl ac_perl_modules="$1" # Make sure we have perl if test -z "$PERL"; then AC_CHECK_PROG(PERL,perl,perl) fi if test "x$PERL" != x; then ac_perl_modules_failed=0 for ac_perl_module in $ac_perl_modules; do AC_MSG_CHECKING(for perl module $ac_perl_module) # Would be nice to log result here, but can't rely on autoconf internals $PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_RESULT(no); ac_perl_modules_failed=1 else AC_MSG_RESULT(ok); fi done # Run optional shell commands if test "$ac_perl_modules_failed" = 0; then : $2 else : $3 fi else AC_MSG_WARN(could not find perl) fi])dnl dnl AM_GCONF_SOURCE_2 dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas dnl (i.e. pass to gconftool-2 dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where dnl you should install foo.schemas files dnl AC_DEFUN([AM_GCONF_SOURCE_2], [ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` else GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE fi AC_ARG_WITH(gconf-source, [ --with-gconf-source=sourceaddress Config database for installing schema files.],GCONF_SCHEMA_CONFIG_SOURCE="$withval",) AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' fi AC_ARG_WITH(gconf-schema-file-dir, [ --with-gconf-schema-file-dir=dir Directory for installing schema files.],GCONF_SCHEMA_FILE_DIR="$withval",) AC_SUBST(GCONF_SCHEMA_FILE_DIR) AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) AC_ARG_ENABLE(schemas-install, [ --disable-schemas-install Disable the schemas installation], [case ${enableval} in yes|no) ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; esac]) AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ])