view src/mediastreamer/g711common.h @ 12115:e9790eb93216

[gaim-migrate @ 14415] quoth charkins: " This patch has a few small fixes for the visibility stuff in gtkblist.c. First, tracking of the ICONIFIED state of the blist was removed. This was intended to allow the blist to "remember" if it was minimized between restarts. Unfortunately, this is not possible because the ICONIFIED state gets set when the blist is on a different desktop with many window managers. Second, while talking about the ICONIFIED issue on #gtk@GIMPNet, muntyan_ asked about a bug where the blist would get shown on an account re-connect with 1.5.0. Luke mentioned something about this with cvs as well. This patch introduces a check in gaim_gtk_blist_show() to prevent the window from being shown if it already exists and is visible. Third, sadrul pointed me to a one-line fix for the missing blist on startup. I added a second line to make sure the blist restores its proper size as well. Finally, when the last visibility manager is removed, gaim will now minimize the blist if it was previously hidden, rather than showing it. This could prevent a race condition with out-of-process applets, preventing gaim from maintaining the visibility state properly between restarts. This was 'cvs diff'ed against the last available anon cvs from Friday. Hopefully it'll apply cleanly." it did. committer: Tailor Script <[e-mail]>

/*
 *  PCM - A-Law conversion
 *  Copyright (c) 2000 by Abramo Bagnara <[e-mail]>
 *
 *  Wrapper for linphone Codec class by Simon Morlat <[e-mail]>
 */

static inline int val_seg(int val)
{
	int r = 0;
	val >>= 7;
	if (val & 0xf0) {
		val >>= 4;
		r += 4;
	}
	if (val & 0x0c) {
		val >>= 2;
		r += 2;
	}
	if (val & 0x02)
		r += 1;
	return r;
}

/*
 * s16_to_alaw() - Convert a 16-bit linear PCM value to 8-bit A-law
 *
 * s16_to_alaw() accepts an 16-bit integer and encodes it as A-law data.
 *
 *		Linear Input Code	Compressed Code
 *	------------------------	---------------
 *	0000000wxyza			000wxyz
 *	0000001wxyza			001wxyz
 *	000001wxyzab			010wxyz
 *	00001wxyzabc			011wxyz
 *	0001wxyzabcd			100wxyz
 *	001wxyzabcde			101wxyz
 *	01wxyzabcdef			110wxyz
 *	1wxyzabcdefg			111wxyz
 *
 * For further information see John C. Bellamy's Digital Telephony, 1982,
 * John Wiley & Sons, pps 98-111 and 472-476.
 */

static inline unsigned char s16_to_alaw(int pcm_val)
{
	int		mask;
	int		seg;
	unsigned char	aval;

	if (pcm_val >= 0) {
		mask = 0xD5;
	} else {
		mask = 0x55;
		pcm_val = -pcm_val;
		if (pcm_val > 0x7fff)
			pcm_val = 0x7fff;
	}

	if (pcm_val < 256)
		aval = pcm_val >> 4;
	else {
		/* Convert the scaled magnitude to segment number. */
		seg = val_seg(pcm_val);
		aval = (seg << 4) | ((pcm_val >> (seg + 3)) & 0x0f);
	}
	return aval ^ mask;
}

/*
 * alaw_to_s16() - Convert an A-law value to 16-bit linear PCM
 *
 */
static inline int alaw_to_s16(unsigned char a_val)
{
	int		t;
	int		seg;

	a_val ^= 0x55;
	t = a_val & 0x7f;
	if (t < 16)
		t = (t << 4) + 8;
	else {
		seg = (t >> 4) & 0x07;
		t = ((t & 0x0f) << 4) + 0x108;
		t <<= seg -1;
	}
	return ((a_val & 0x80) ? t : -t);
}
/*
 * s16_to_ulaw() - Convert a linear PCM value to u-law
 *
 * In order to simplify the encoding process, the original linear magnitude
 * is biased by adding 33 which shifts the encoding range from (0 - 8158) to
 * (33 - 8191). The result can be seen in the following encoding table:
 *
 *	Biased Linear Input Code	Compressed Code
 *	------------------------	---------------
 *	00000001wxyza			000wxyz
 *	0000001wxyzab			001wxyz
 *	000001wxyzabc			010wxyz
 *	00001wxyzabcd			011wxyz
 *	0001wxyzabcde			100wxyz
 *	001wxyzabcdef			101wxyz
 *	01wxyzabcdefg			110wxyz
 *	1wxyzabcdefgh			111wxyz
 *
 * Each biased linear code has a leading 1 which identifies the segment
 * number. The value of the segment number is equal to 7 minus the number
 * of leading 0's. The quantization interval is directly available as the
 * four bits wxyz.  * The trailing bits (a - h) are ignored.
 *
 * Ordinarily the complement of the resulting code word is used for
 * transmission, and so the code word is complemented before it is returned.
 *
 * For further information see John C. Bellamy's Digital Telephony, 1982,
 * John Wiley & Sons, pps 98-111 and 472-476.
 */

static inline unsigned char s16_to_ulaw(int pcm_val)	/* 2's complement (16-bit range) */
{
	int mask;
	int seg;
	unsigned char uval;

	if (pcm_val < 0) {
		pcm_val = 0x84 - pcm_val;
		mask = 0x7f;
	} else {
		pcm_val += 0x84;
		mask = 0xff;
	}
	if (pcm_val > 0x7fff)
		pcm_val = 0x7fff;

	/* Convert the scaled magnitude to segment number. */
	seg = val_seg(pcm_val);

	/*
	 * Combine the sign, segment, quantization bits;
	 * and complement the code word.
	 */
	uval = (seg << 4) | ((pcm_val >> (seg + 3)) & 0x0f);
	return uval ^ mask;
}

/*
 * ulaw_to_s16() - Convert a u-law value to 16-bit linear PCM
 *
 * First, a biased linear code is derived from the code word. An unbiased
 * output can then be obtained by subtracting 33 from the biased code.
 *
 * Note that this function expects to be passed the complement of the
 * original code word. This is in keeping with ISDN conventions.
 */
static inline int ulaw_to_s16(unsigned char u_val)
{
	int t;

	/* Complement to obtain normal u-law value. */
	u_val = ~u_val;

	/*
	 * Extract and bias the quantization bits. Then
	 * shift up by the segment number and subtract out the bias.
	 */
	t = ((u_val & 0x0f) << 3) + 0x84;
	t <<= (u_val & 0x70) >> 4;

	return ((u_val & 0x80) ? (0x84 - t) : (t - 0x84));
}