Mercurial > pt1.oyama
view driver/pt1_pci.c @ 6:d898fd27547f
cleanups
author | Yoshiki Yazawa <yaz@honeyplanet.jp> |
---|---|
date | Tue, 17 Feb 2009 11:39:26 +0900 (2009-02-17) |
parents | 67e8eca28a80 |
children | 07b2fc07ff48 |
line wrap: on
line source
/* pt1-pci.c: A PT1 on PCI bus driver for Linux. */ #define DRV_NAME "pt1-pci" #define DRV_VERSION "1.00" #define DRV_RELDATE "11/28/2008" #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/interrupt.h> #include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> #include <linux/version.h> #include <linux/mutex.h> #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) #include <linux/freezer.h> #else #define set_freezable() #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) typedef struct pm_message { int event; } pm_message_t; #endif #endif #include <linux/kthread.h> #include <linux/dma-mapping.h> #include <linux/fs.h> #include <linux/cdev.h> #include <linux/ioctl.h> #include "pt1_com.h" #include "pt1_pci.h" #include "pt1_tuner.h" #include "pt1_i2c.h" #include "pt1_tuner_data.h" #include "pt1_ioctl.h" /* These identify the driver base version and may not be removed. */ static char version[] __devinitdata = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " \n"; MODULE_AUTHOR("Tomoaki Ishikawa tomy@users.sourceforge.jp"); #define DRIVER_DESC "PCI earthsoft PT1 driver" MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ static int lnb = 0; /* LNB OFF:0 +11V:1 +15V:2 */ module_param(debug, int, 0); module_param(lnb, int, 0); MODULE_PARM_DESC(debug, "debug level (1-2)"); MODULE_PARM_DESC(debug, "LNB level (0:OFF 1:+11V 2:+15V)"); static struct pci_device_id pt1_pci_tbl[] = { { 0x10ee, 0x211a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0, } }; MODULE_DEVICE_TABLE(pci, pt1_pci_tbl); #define DEV_NAME "pt1video" #define MAX_READ_BLOCK 4 // 1度に読み出す最大DMAバッファ数 #define MAX_PCI_DEVICE 64 // 最大64枚 #define DMA_SIZE 4096 // DMAバッファサイズ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22) #define DMA_RING_SIZE 64 // RINGサイズ #define DMA_RING_MAX 511 // 1RINGにいくつ詰めるか(1023はNGで511まで) #define CHANEL_DMA_SIZE (1*1024*1024) // 地デジ用(16Mbps) #define BS_CHANEL_DMA_SIZE (1*1024*1024) // BS用(32Mbps) #else #define DMA_RING_SIZE 28 // RINGサイズ #define DMA_RING_MAX 511 // 1RINGにいくつ詰めるか(1023はNGで511まで) #define CHANEL_DMA_SIZE (1*128*1024) // 地デジ用(16Mbps) #define BS_CHANEL_DMA_SIZE (1*128*1024) // BS用(32Mbps) #endif typedef struct _DMA_CONTROL{ dma_addr_t ring_dma[DMA_RING_MAX] ; // DMA情報 __u32 *data[DMA_RING_MAX]; }DMA_CONTROL; typedef struct _PT1_CHANNEL PT1_CHANNEL; typedef struct _pt1_device{ unsigned long mmio_start ; __u32 mmio_len ; void __iomem *regs; struct mutex lock ; dma_addr_t ring_dma[DMA_RING_SIZE] ; // DMA情報 void *dmaptr[DMA_RING_SIZE] ; struct task_struct *kthread; dev_t dev ; __u32 base_minor ; struct cdev cdev[MAX_CHANNEL]; wait_queue_head_t dma_wait_q ;// for poll on reading DMA_CONTROL dmactl[DMA_RING_SIZE]; PT1_CHANNEL *channel[MAX_CHANNEL]; }PT1_DEVICE; typedef struct _MICRO_PACKET{ char data[3]; char head ; }MICRO_PACKET; struct _PT1_CHANNEL{ __u32 valid ; // 使用中フラグ __u32 address ; // I2Cアドレス __u32 channel ; // チャネル番号 int type ; // チャネルタイプ __u32 drop ; // パケットドロップ数 struct mutex lock ; // CH別mutex_lock用 __u32 size ; // DMAされたサイズ __u32 maxsize ; // DMA用バッファサイズ __u32 bufsize ; // チャネルに割り振られたサイズ __u32 overflow ; // オーバーフローエラー発生 __u32 counetererr ; // 転送カウンタ1エラー __u32 transerr ; // 転送エラー __u32 minor ; // マイナー番号 __u8 *buf; // CH別受信メモリ __u8 req_dma ; // 溢れたチャネル PT1_DEVICE *ptr ; // カード別情報 wait_queue_head_t wait_q ; // for poll on reading }; // I2Cアドレス(video0, 1 = ISDB-S) (video2, 3 = ISDB-T) int i2c_address[MAX_CHANNEL] = {T0_ISDB_S, T1_ISDB_S, T0_ISDB_T, T1_ISDB_T}; int real_chanel[MAX_CHANNEL] = {0, 2, 1, 3}; int channeltype[MAX_CHANNEL] = {CHANNEL_TYPE_ISDB_S, CHANNEL_TYPE_ISDB_S, CHANNEL_TYPE_ISDB_T, CHANNEL_TYPE_ISDB_T}; static PT1_DEVICE *device[MAX_PCI_DEVICE]; #define PT1MAJOR 251 #define DRIVERNAME "pt1video" static void reset_dma(PT1_DEVICE *dev_conf) { int lp ; __u32 addr ; int ring_pos = 0; int data_pos = 0 ; __u32 *dataptr ; // データ初期化 for(ring_pos = 0 ; ring_pos < DMA_RING_SIZE ; ring_pos++){ for(data_pos = 0 ; data_pos < DMA_RING_MAX ; data_pos++){ dataptr = dev_conf->dmactl[ring_pos].data[data_pos]; // データあり? if(dataptr[(DMA_SIZE / sizeof(__u32)) - 2] == 0){ break ; } } } // 転送カウンタをリセット writel(0x00000010, dev_conf->regs); // 転送カウンタをインクリメント for(lp = 0 ; lp < DMA_RING_SIZE ; lp++){ writel(0x00000020, dev_conf->regs); } addr = (int)dev_conf->ring_dma[0] ; addr >>= 12 ; // DMAバッファ設定 writel(addr, dev_conf->regs + DMA_ADDR); // DMA開始 writel(0x0c000040, dev_conf->regs); } static int pt1_thread(void *data) { PT1_DEVICE *dev_conf = data ; PT1_CHANNEL *channel ; int ring_pos = 0; int data_pos = 0 ; int lp ; int chno ; int lp2 ; __u32 addr ; __u32 *dataptr ; __u32 *curdataptr ; __u32 val ; union mpacket{ __u32 val ; MICRO_PACKET packet ; }micro; set_freezable(); reset_dma(dev_conf); printk(KERN_INFO "pt1_thread run\n"); for(;;){ if(kthread_should_stop()){ break ; } for(;;){ dataptr = dev_conf->dmactl[ring_pos].data[data_pos]; // データあり? if(dataptr[(DMA_SIZE / sizeof(__u32)) - 2] == 0){ break ; } micro.val = *dataptr ; curdataptr = dataptr ; data_pos += 1 ; for(lp = 0 ; lp < (DMA_SIZE / sizeof(__u32)) ; lp++, dataptr++){ micro.val = *dataptr ; chno = real_chanel[(((micro.packet.head >> 5) & 0x07) - 1)]; channel = dev_conf->channel[chno] ; // エラーチェック if((micro.packet.head & MICROPACKET_ERROR)){ val = readl(dev_conf->regs); if((val & BIT_RAM_OVERFLOW)){ channel->overflow += 1 ; } if((val & BIT_INITIATOR_ERROR)){ channel->counetererr += 1 ; } if((val & BIT_INITIATOR_WARNING)){ channel->transerr += 1 ; } // 初期化して先頭から reset_dma(dev_conf); ring_pos = data_pos = 0 ; break ; } // 未使用チャネルは捨てる if(channel->valid == FALSE){ continue ; } mutex_lock(&channel->lock); // あふれたら読み出すまで待つ while(1){ if(channel->size >= (channel->maxsize - 4)){ // 該当チャンネルのDMA読みだし待ちにする wake_up(&channel->wait_q); channel->req_dma = TRUE ; mutex_unlock(&channel->lock); // タスクに時間を渡す為中断 wait_event_timeout(dev_conf->dma_wait_q, (channel->req_dma == FALSE), msecs_to_jiffies(500)); mutex_lock(&channel->lock); channel->drop += 1 ; }else{ break ; } } // データコピー for(lp2 = 2 ; lp2 >= 0 ; lp2--){ channel->buf[channel->size] = micro.packet.data[lp2]; channel->size += 1 ; } mutex_unlock(&channel->lock); } curdataptr[(DMA_SIZE / sizeof(__u32)) - 2] = 0; if(data_pos >= DMA_RING_MAX){ data_pos = 0; ring_pos += 1 ; // DMAリングが変わった場合はインクリメント writel(0x00000020, dev_conf->regs); if(ring_pos >= DMA_RING_SIZE){ ring_pos = 0 ; } } // 頻度を落す(4Kで起動させる) for(lp = 0 ; lp < MAX_CHANNEL ; lp++){ channel = dev_conf->channel[real_chanel[lp]] ; if((channel->size >= DMA_SIZE) && (channel->valid == TRUE)){ wake_up(&channel->wait_q); } } } schedule_timeout_interruptible(msecs_to_jiffies(1)); } return 0 ; } static int pt1_open(struct inode *inode, struct file *file) { int minor = iminor(inode); int lp ; int lp2 ; PT1_CHANNEL *channel ; for(lp = 0 ; lp < MAX_PCI_DEVICE ; lp++){ if(device[lp] == NULL){ return -EIO ; } printk(KERN_INFO "(%d)base_minor=%d: MAX=%d(%d)\n", lp, device[lp]->base_minor, (device[lp]->base_minor + MAX_CHANNEL), minor); if((device[lp]->base_minor <= minor) && ((device[lp]->base_minor + MAX_CHANNEL) > minor)){ mutex_lock(&device[lp]->lock); for(lp2 = 0 ; lp2 < MAX_CHANNEL ; lp2++){ channel = device[lp]->channel[lp2] ; printk(KERN_INFO "Minor(%d:%d)\n", channel->minor, minor); if(channel->minor == minor){ if(channel->valid == TRUE){ mutex_unlock(&device[lp]->lock); return -EIO ; } channel->drop = 0 ; channel->valid = TRUE ; channel->overflow = 0 ; channel->counetererr = 0 ; channel->transerr = 0 ; file->private_data = channel; mutex_lock(&channel->lock); // データ初期化 channel->size = 0 ; mutex_unlock(&channel->lock); mutex_unlock(&device[lp]->lock); return 0 ; } } } } return -EIO; } static int pt1_release(struct inode *inode, struct file *file) { int minor = iminor(inode); PT1_CHANNEL *channel = file->private_data; mutex_lock(&channel->ptr->lock); SetStream(channel->ptr->regs, channel->channel, FALSE); channel->valid = FALSE ; printk(KERN_INFO "(%d)Drop=%08d:%08d:%08d:%08d\n", iminor(inode), channel->drop, channel->overflow, channel->counetererr, channel->transerr); channel->overflow = 0 ; channel->counetererr = 0 ; channel->transerr = 0 ; channel->drop = 0 ; // 停止している場合は起こす if(channel->req_dma == TRUE){ channel->req_dma = FALSE ; wake_up(&channel->ptr->dma_wait_q); } mutex_unlock(&channel->ptr->lock); return 0; } static ssize_t pt1_read(struct file *file, char __user *buf, size_t cnt, loff_t * ppos) { PT1_CHANNEL *channel = file->private_data; __u32 size ; // 4K単位で起こされるのを待つ(CPU負荷対策) if(channel->size < DMA_SIZE){ wait_event_timeout(channel->wait_q, (channel->size >= DMA_SIZE), msecs_to_jiffies(500)); } mutex_lock(&channel->lock); if(!channel->size){ size = 0 ; }else{ if(cnt < channel->size){ // バッファが足りない場合は残りを移動する size = cnt ; copy_to_user(buf, channel->buf, cnt); memmove(channel->buf, &channel->buf[cnt], (channel->size - cnt)); channel->size -= cnt ; }else{ size = channel->size ; copy_to_user(buf, channel->buf, size); channel->size = 0 ; } } // 読み終わったかつ使用しているのがが4K以下 if((channel->req_dma == TRUE) && (channel->size < DMA_SIZE)){ channel->req_dma = FALSE ; wake_up(&channel->ptr->dma_wait_q); } mutex_unlock(&channel->lock); return size ; } static int SetFreq(PT1_CHANNEL *channel, FREQUENCY *freq) { switch(channel->type){ case CHANNEL_TYPE_ISDB_S: { ISDB_S_TMCC tmcc ; int lp ; if(bs_tune(channel->ptr->regs, &channel->ptr->lock, channel->address, freq->frequencyno, &tmcc) < 0){ return -EIO ; } printk(KERN_INFO "cn = (%x:%x)\n", (tmcc.cn[0] & 0xFF), (tmcc.cn[1] & 0xFF)); printk(KERN_INFO "agc = (%x)\n", (tmcc.agc & 0xFF)); #if 0 printk(KERN_INFO "clockmargin = (%x)\n", (tmcc.clockmargin & 0xFF)); printk(KERN_INFO "carriermargin = (%x)\n", (tmcc.carriermargin & 0xFF)); for(lp = 0 ; lp < MAX_BS_TS_ID ; lp++){ if(tmcc.ts_id[lp].ts_id == 0xFFFF){ continue ; } printk(KERN_INFO "Slot(%d:%x)\n", lp, tmcc.ts_id[lp].ts_id); printk(KERN_INFO "mode (low/high) = (%x:%x)\n", tmcc.ts_id[lp].low_mode, tmcc.ts_id[lp].high_mode); printk(KERN_INFO "slot (low/high) = (%x:%x)\n", tmcc.ts_id[lp].low_slot, tmcc.ts_id[lp].high_slot); } #endif ts_lock(channel->ptr->regs, &channel->ptr->lock, channel->address, tmcc.ts_id[freq->slot].ts_id); } break ; case CHANNEL_TYPE_ISDB_T: { if(isdb_t_frequency(channel->ptr->regs, &channel->ptr->lock, channel->address, freq->frequencyno, freq->slot) < 0){ return -EINVAL ; } } } return 0 ; } static int pt1_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) { PT1_CHANNEL *channel = file->private_data; switch(cmd){ case SET_CHANNEL: { FREQUENCY freq ; copy_from_user(&freq, arg, sizeof(FREQUENCY)); return SetFreq(channel, &freq); } case START_REC: SetStream(channel->ptr->regs, channel->channel, TRUE); return 0 ; case STOP_REC: SetStream(channel->ptr->regs, channel->channel, FALSE); return 0 ; } return -EINVAL; } /* */ static const struct file_operations pt1_fops = { .owner = THIS_MODULE, .open = pt1_open, .release = pt1_release, .read = pt1_read, .ioctl = pt1_ioctl, .llseek = no_llseek, }; int pt1_makering(struct pci_dev *pdev, PT1_DEVICE *dev_conf) { int lp ; int lp2 ; DMA_CONTROL *dmactl; __u32 *dmaptr ; __u32 addr ; __u32 *ptr ; //DMAリング作成 for(lp = 0 ; lp < DMA_RING_SIZE ; lp++){ ptr = dev_conf->dmaptr[lp]; if(lp == (DMA_RING_SIZE - 1)){ addr = (__u32)dev_conf->ring_dma[0]; }else{ addr = (__u32)dev_conf->ring_dma[(lp + 1)]; } addr >>= 12 ; memcpy(ptr, &addr, sizeof(__u32)); ptr += 1 ; dmactl = &dev_conf->dmactl[lp]; for(lp2 = 0 ; lp2 < DMA_RING_MAX ; lp2++){ dmaptr = pci_alloc_consistent(pdev, DMA_SIZE, &dmactl->ring_dma[lp2]); if(dmaptr == NULL){ printk(KERN_INFO "PT1:DMA ALLOC ERROR\n"); return -1 ; } dmactl->data[lp2] = dmaptr ; // DMAデータエリア初期化 dmaptr[(DMA_SIZE / sizeof(__u32)) - 2] = 0 ; addr = (__u32)dmactl->ring_dma[lp2]; addr >>= 12 ; memcpy(ptr, &addr, sizeof(__u32)); ptr += 1 ; } } return 0 ; } int pt1_dma_init(struct pci_dev *pdev, PT1_DEVICE *dev_conf) { int lp ; void *ptr ; for(lp = 0 ; lp < DMA_RING_SIZE ; lp++){ ptr = pci_alloc_consistent(pdev, DMA_SIZE, &dev_conf->ring_dma[lp]); if(ptr == NULL){ printk(KERN_INFO "PT1:DMA ALLOC ERROR\n"); return -1 ; } dev_conf->dmaptr[lp] = ptr ; } return pt1_makering(pdev, dev_conf); } int pt1_dma_free(struct pci_dev *pdev, PT1_DEVICE *dev_conf) { int lp ; int lp2 ; for(lp = 0 ; lp < DMA_RING_SIZE ; lp++){ if(dev_conf->dmaptr[lp] != NULL){ pci_free_consistent(pdev, DMA_SIZE, dev_conf->dmaptr[lp], dev_conf->ring_dma[lp]); for(lp2 = 0 ; lp2 < DMA_RING_MAX ; lp2++){ if(dev_conf->dmactl[lp].data[lp2] != NULL){ pci_free_consistent(pdev, DMA_SIZE, dev_conf->dmactl[lp].data[lp2], dev_conf->dmactl[lp].ring_dma[lp2]); } } } } return 0 ; } static int __devinit pt1_pci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { int rc ; int lp ; int minor ; u16 cmd ; PT1_DEVICE *dev_conf ; PT1_CHANNEL *channel ; rc = pci_enable_device(pdev); if (rc) return rc; rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { printk(KERN_ERR "PT1:DMA MASK ERROR"); return rc; } pci_read_config_word(pdev, PCI_COMMAND, &cmd); if (!(cmd & PCI_COMMAND_MASTER)) { printk(KERN_INFO "Attempting to enable Bus Mastering\n"); pci_set_master(pdev); pci_read_config_word(pdev, PCI_COMMAND, &cmd); if (!(cmd & PCI_COMMAND_MASTER)) { printk(KERN_ERR "Bus Mastering is not enabled\n"); return -EIO; } } printk(KERN_INFO "Bus Mastering Enabled.\n"); dev_conf = kzalloc(sizeof(PT1_DEVICE), GFP_KERNEL); if(!dev_conf){ printk(KERN_ERR "PT1:out of memory !"); return -ENOMEM ; } // PCIアドレスをマップする dev_conf->mmio_start = pci_resource_start(pdev, 0); dev_conf->mmio_len = pci_resource_len(pdev, 0); rc = request_mem_region(dev_conf->mmio_start, dev_conf->mmio_len, DEV_NAME); if (!rc) { printk(KERN_ERR "PT1: cannot request iomem (0x%llx).\n", (unsigned long long) dev_conf->mmio_start); goto out_err_regbase; } dev_conf->regs = ioremap(dev_conf->mmio_start, dev_conf->mmio_len); if (!dev_conf->regs){ printk(KERN_ERR "pt1: Can't remap register area.\n"); goto out_err_regbase; } // 初期化処理 if(xc3s_init(dev_conf->regs)){ printk(KERN_ERR "Error xc3s_init\n"); goto out_err_fpga; } // チューナリセット settuner_reset(dev_conf->regs, LNB_OFF, TUNER_POWER_ON_RESET_ENABLE); schedule_timeout_interruptible(msecs_to_jiffies(50)); settuner_reset(dev_conf->regs, lnb, TUNER_POWER_ON_RESET_DISABLE); schedule_timeout_interruptible(msecs_to_jiffies(10)); mutex_init(&dev_conf->lock); // Tuner 初期化処理 for(lp = 0 ; lp < MAX_TUNER ; lp++){ rc = tuner_init(dev_conf->regs, &dev_conf->lock, lp); if(rc < 0){ printk(KERN_ERR "Error tuner_init\n"); goto out_err_fpga; } } // 初期化完了 for(lp = 0 ; lp < MAX_CHANNEL ; lp++){ set_sleepmode(dev_conf->regs, &dev_conf->lock, i2c_address[lp], channeltype[lp], TYPE_SLEEP); schedule_timeout_interruptible(msecs_to_jiffies(50)); } rc = alloc_chrdev_region(&dev_conf->dev, 0, MAX_CHANNEL, DEV_NAME); if(rc < 0){ goto out_err_fpga; } // 初期化 init_waitqueue_head(&dev_conf->dma_wait_q); minor = MINOR(dev_conf->dev) ; dev_conf->base_minor = minor ; for(lp = 0 ; lp < MAX_PCI_DEVICE ; lp++){ if(device[lp] == NULL){ device[lp] = dev_conf ; printk(KERN_INFO "Alloc[%d]\n", lp); break ; } } for(lp = 0 ; lp < MAX_CHANNEL ; lp++){ cdev_init(&dev_conf->cdev[lp], &pt1_fops); cdev_add(&dev_conf->cdev[lp], MKDEV(MAJOR(dev_conf->dev), (MINOR(dev_conf->dev) + lp)), 1); channel = kzalloc(sizeof(PT1_CHANNEL), GFP_KERNEL); if(!channel){ printk(KERN_ERR "PT1:out of memory !"); return -ENOMEM ; } // 共通情報 mutex_init(&channel->lock); // 待ち状態を解除 channel->req_dma = FALSE ; // マイナー番号設定 channel->minor = MINOR(dev_conf->dev) + lp ; printk(KERN_INFO "Minor[%d]\n", channel->minor); // 対象のI2Cデバイス channel->address = i2c_address[lp] ; channel->type = channeltype[lp] ; // 実際のチューナ番号 channel->channel = real_chanel[lp] ; channel->ptr = dev_conf ; channel->size = 0 ; dev_conf->channel[lp] = channel ; init_waitqueue_head(&channel->wait_q); switch(channel->type){ case CHANNEL_TYPE_ISDB_T: channel->maxsize = CHANEL_DMA_SIZE ; channel->buf = kzalloc(CHANEL_DMA_SIZE, GFP_KERNEL); break ; case CHANNEL_TYPE_ISDB_S: channel->maxsize = BS_CHANEL_DMA_SIZE ; channel->buf = kzalloc(BS_CHANEL_DMA_SIZE, GFP_KERNEL); break ; } if(channel->buf == NULL){ goto out_err_v4l; } #if 0 dev_conf->vdev[lp] = video_device_alloc(); memcpy(dev_conf->vdev[lp], &pt1_template, sizeof(pt1_template)); video_set_drvdata(dev_conf->vdev[lp], channel); video_register_device(dev_conf->vdev[lp], VFL_TYPE_GRABBER, -1); #endif } if(pt1_dma_init(pdev, dev_conf) < 0){ goto out_err_dma; } dev_conf->kthread = kthread_run(pt1_thread, dev_conf, "pt1"); pci_set_drvdata(pdev, dev_conf); return 0; out_err_dma: pt1_dma_free(pdev, dev_conf); out_err_v4l: for(lp = 0 ; lp < MAX_CHANNEL ; lp++){ if(dev_conf->channel[lp] != NULL){ if(dev_conf->channel[lp]->buf != NULL){ kfree(dev_conf->channel[lp]->buf); } kfree(dev_conf->channel[lp]); } } out_err_fpga: writel(0xb0b0000, dev_conf->regs); writel(0, dev_conf->regs + 4); iounmap(dev_conf->regs); release_mem_region(dev_conf->mmio_start, dev_conf->mmio_len); kfree(dev_conf); out_err_regbase: return -EIO; } static void __devexit pt1_pci_remove_one(struct pci_dev *pdev) { int lp ; __u32 val ; PT1_DEVICE *dev_conf = (PT1_DEVICE *)pci_get_drvdata(pdev); if(dev_conf){ if(dev_conf->kthread) { kthread_stop(dev_conf->kthread); dev_conf->kthread = NULL; } // DMA終了 writel(0x08080000, dev_conf->regs); for(lp = 0 ; lp < 10 ; lp++){ val = readl(dev_conf->regs); if(!(val & (1 << 6))){ break ; } schedule_timeout_interruptible(msecs_to_jiffies(1)); } pt1_dma_free(pdev, dev_conf); for(lp = 0 ; lp < MAX_CHANNEL ; lp++){ if(dev_conf->channel[lp] != NULL){ cdev_del(&dev_conf->cdev[lp]); kfree(dev_conf->channel[lp]->buf); kfree(dev_conf->channel[lp]); } } unregister_chrdev_region(dev_conf->dev, MAX_CHANNEL); writel(0xb0b0000, dev_conf->regs); writel(0, dev_conf->regs + 4); settuner_reset(dev_conf->regs, LNB_OFF, TUNER_POWER_OFF); release_mem_region(dev_conf->mmio_start, dev_conf->mmio_len); iounmap(dev_conf->regs); kfree(dev_conf); } pci_set_drvdata(pdev, NULL); } #ifdef CONFIG_PM static int pt1_pci_suspend (struct pci_dev *pdev, pm_message_t state) { return 0; } static int pt1_pci_resume (struct pci_dev *pdev) { return 0; } #endif /* CONFIG_PM */ static struct pci_driver pt1_driver = { .name = DRV_NAME, .probe = pt1_pci_init_one, .remove = __devexit_p(pt1_pci_remove_one), .id_table = pt1_pci_tbl, #ifdef CONFIG_PM .suspend = pt1_pci_suspend, .resume = pt1_pci_resume, #endif /* CONFIG_PM */ }; static int __init pt1_pci_init(void) { return pci_register_driver(&pt1_driver); } static void __exit pt1_pci_cleanup(void) { pci_unregister_driver (&pt1_driver); } module_init(pt1_pci_init); module_exit(pt1_pci_cleanup);