| Wed, 14 Apr 2010 00:29:21 +0900 |
naoyan |
commit test.
|
| Thu, 25 Mar 2010 20:47:09 +0900 |
Yoshiki Yazawa |
- fix version string
|
| Thu, 25 Mar 2010 20:29:54 +0900 |
Yoshiki Yazawa |
fix --bell option
|
| Fri, 19 Mar 2010 16:42:32 +0900 |
Yoshiki Yazawa |
improve checksignal command:
|
| Fri, 19 Mar 2010 01:01:35 +0900 |
Yoshiki Yazawa |
add an utility to check signal strength.
|
| Fri, 19 Mar 2010 00:57:25 +0900 |
Yoshiki Yazawa |
add a workaround for stucking on AnalyzePmt().
|
| Fri, 19 Mar 2010 00:51:35 +0900 |
Yoshiki Yazawa |
re-enable set_sleepmode. backing out r109.
|
| Sun, 07 Mar 2010 20:10:18 +0900 |
Yoshiki Yazawa |
do not stuck on split_select() more than 4 sec.
|
| Sat, 06 Mar 2010 19:13:17 +0900 |
Yoshiki Yazawa |
temporarily disabled set_sleepmode due to frequent read problem.
|
| Wed, 03 Mar 2010 03:54:05 +0900 |
Yoshiki Yazawa |
make sure that wait after set_sleepmode()
|
| Sat, 27 Feb 2010 04:48:25 +0900 |
Yoshiki Yazawa |
fix ECM more
|
| Sat, 27 Feb 2010 04:10:16 +0900 |
Yoshiki Yazawa |
avoid infinite loop. length in the first descriptor loop can be zero.
|
| Fri, 26 Feb 2010 22:58:59 +0900 |
Yoshiki Yazawa |
need not to unset use_splitter flag on fall back.
|
| Fri, 26 Feb 2010 22:55:44 +0900 |
Yoshiki Yazawa |
output ECM packet so that former workaround is no longer needed.
|
| Fri, 26 Feb 2010 19:46:03 +0900 |
Yoshiki Yazawa |
temporary workaround: disable splitter if decoder is disabled.
|
| Wed, 24 Feb 2010 22:44:06 +0900 |
Yoshiki Yazawa |
send tuners to sleep mode when they are inactive
|
| Sun, 14 Feb 2010 22:12:10 +0900 |
Yoshiki Yazawa |
fix calculation for continuity counter
|
| Sat, 13 Feb 2010 19:43:25 +0900 |
Yoshiki Yazawa |
support macros to specify sid:
|
| Fri, 12 Feb 2010 21:40:21 +0900 |
Yoshiki Yazawa |
now recpt1 accepts single sid for terrestrial channels.
|
| Wed, 10 Feb 2010 15:02:25 +0900 |
Yoshiki Yazawa |
tweak user interface for sid:
|
| Wed, 10 Feb 2010 14:55:03 +0900 |
Yoshiki Yazawa |
- restore channel conversion table
|
| Wed, 10 Feb 2010 14:33:32 +0900 |
Yoshiki Yazawa |
add an option to specify the necessary service IDs.
|
| Tue, 09 Feb 2010 06:27:01 +0900 |
Yoshiki Yazawa |
implement decent LNB management
|
| Sat, 06 Feb 2010 03:04:11 +0900 |
Yoshiki Yazawa |
fix frequency calculation for catv channels
|
| Thu, 28 Jan 2010 15:54:04 +0900 |
Yoshiki Yazawa |
suppress silly warning
|
| Thu, 28 Jan 2010 00:18:51 +0900 |
Yoshiki Yazawa |
should use double quotation
|
| Wed, 27 Jan 2010 16:45:37 +0900 |
Yoshiki Yazawa |
- adapt date format to driver's one
|
| Wed, 27 Jan 2010 16:43:03 +0900 |
Yoshiki Yazawa |
- version string should be generated upon revision on mercurial repository
|
| Wed, 27 Jan 2010 15:12:50 +0900 |
Yoshiki Yazawa |
do not give up if LNB ioctl failed
|
| Wed, 27 Jan 2010 14:36:47 +0900 |
Yoshiki Yazawa |
improve stability on changing channel
|
| Wed, 27 Jan 2010 03:48:15 +0900 |
Yoshiki Yazawa |
accept wowow2/3 and BS-hi temporal channels
|
| Tue, 19 Jan 2010 06:33:08 +0900 |
Yoshiki Yazawa |
clean up a bit.
|
| Tue, 19 Jan 2010 06:13:40 +0900 |
Yoshiki Yazawa |
falls back to encrypted recording when b25_decode fails.
|
| Wed, 13 Jan 2010 17:14:43 +0900 |
Yoshiki Yazawa |
should just shutdown when write() fails.
|
| Sat, 09 Jan 2010 12:50:24 +0900 |
Yoshiki Yazawa |
include linux/sched.h explicitly. that file might be missing on some distributions.
|
| Mon, 04 Jan 2010 22:49:18 +0900 |
Yoshiki Yazawa |
added LNB reference count to maintain power state during recording.
|
| Sat, 12 Dec 2009 22:30:43 +0900 |
Yoshiki Yazawa |
add an option to specify LNB voltage
|
| Sat, 12 Dec 2009 22:29:30 +0900 |
Yoshiki Yazawa |
make LNB voltage can be specified from user application
|
| Mon, 07 Dec 2009 15:01:57 +0900 |
Yoshiki Yazawa |
improve PT2 support.
|
| Tue, 01 Dec 2009 20:24:22 +0900 |
Yoshiki Yazawa |
landed ipc control functionality branch
|
| Tue, 01 Dec 2009 18:33:01 +0900 |
Yoshiki Yazawa |
a bit cleanup
|
| Sat, 28 Nov 2009 06:24:21 +0900 |
Yoshiki Yazawa |
removed meaningless AC_PROG_INSTALL
|
| Sat, 28 Nov 2009 02:06:16 +0900 |
Yoshiki Yazawa |
build fix
|
| Sat, 28 Nov 2009 00:12:05 +0900 |
Yoshiki Yazawa |
good citizens never use gray code. wise people never watch TV.
|
| Wed, 18 Nov 2009 13:12:44 +0900 |
Yoshiki Yazawa |
hg no longer accepts '#' in a template
|
| Thu, 12 Nov 2009 20:19:05 +0900 |
Yoshiki Yazawa |
hide misleading build message
|
| Sat, 31 Oct 2009 04:15:22 +0900 |
Yoshiki Yazawa |
correct number of initialization data.
|
| Wed, 28 Oct 2009 21:04:53 +0900 |
Yoshiki Yazawa |
added a LF
|
| Mon, 26 Oct 2009 19:46:49 +0900 |
Yoshiki Yazawa |
added very rough support for PT2.
|
| Sat, 24 Oct 2009 20:40:11 +0900 |
Yoshiki Yazawa |
added the terrestrial channel list for Nagoya region. contributed by Hiroshi Someya.
|
| Sat, 24 Oct 2009 17:05:01 +0900 |
Yoshiki Yazawa |
replaced full-width colon with half-width colon in channel list.
|
| Sat, 24 Oct 2009 16:49:53 +0900 |
Yoshiki Yazawa |
fix a problem that compilation fails if hg is not installed.
|
| Thu, 22 Oct 2009 02:26:03 +0900 |
Yoshiki Yazawa |
fixed indentation
|
| Thu, 22 Oct 2009 02:18:12 +0900 |
Yoshiki Yazawa |
added fake support code for PT2. the PT2 part is not expected to work. be careful!
|
| Sat, 10 Oct 2009 01:11:34 +0900 |
Yoshiki Yazawa |
fix for a bug that recpt1 crashes if dirname(3) returns '.'
|
| Fri, 09 Oct 2009 14:02:18 +0900 |
Yoshiki Yazawa |
make some messages go stderr instead of stdout.
|
| Fri, 09 Oct 2009 11:04:36 +0900 |
Yoshiki Yazawa |
ensure path of destination file exists. imported Jonathan Leffler's mkpath.
|
| Sat, 03 Oct 2009 13:25:13 +0900 |
Yoshiki Yazawa |
add sample channel lists.
|
| Sat, 03 Oct 2009 13:07:43 +0900 |
Yoshiki Yazawa |
recpt1 shows list of terrestrial channels if .recpt1-channels is available in the home directory.
|
| Tue, 22 Sep 2009 01:13:34 +0900 |
Yoshiki Yazawa |
tweaked Makefile
|
