changeset 53:710d8b266d7e trunk

[svn] Cleaning autogenerated files
author msameer
date Thu, 27 Oct 2005 12:54:05 -0700
parents fc4dbbeae814
children 25e69f085ad9
files aclocal.m4 compile depcomp ltconfig ltmain.sh
diffstat 4 files changed, 0 insertions(+), 14562 deletions(-) [+]
line wrap: on
line diff
--- a/aclocal.m4	Thu Oct 27 12:50:36 2005 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,7352 +0,0 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Configure paths for libFLAC
-# "Inspired" by ogg.m4
-
-dnl AM_PATH_LIBFLAC([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl Test for libFLAC, and define LIBFLAC_CFLAGS and LIBFLAC_LIBS
-dnl
-AC_DEFUN([AM_PATH_LIBFLAC],
-[dnl 
-dnl Get the cflags and libraries
-dnl
-AC_ARG_WITH(libFLAC,[  --with-libFLAC=PFX   Prefix where libFLAC is installed (optional)], libFLAC_prefix="$withval", libFLAC_prefix="")
-AC_ARG_WITH(libFLAC-libraries,[  --with-libFLAC-libraries=DIR   Directory where libFLAC library is installed (optional)], libFLAC_libraries="$withval", libFLAC_libraries="")
-AC_ARG_WITH(libFLAC-includes,[  --with-libFLAC-includes=DIR   Directory where libFLAC header files are installed (optional)], libFLAC_includes="$withval", libFLAC_includes="")
-AC_ARG_ENABLE(libFLACtest, [  --disable-libFLACtest       Do not try to compile and run a test libFLAC program],, enable_libFLACtest=yes)
-
-  if test "x$libFLAC_libraries" != "x" ; then
-    LIBFLAC_LIBS="-L$libFLAC_libraries"
-  elif test "x$libFLAC_prefix" != "x" ; then
-    LIBFLAC_LIBS="-L$libFLAC_prefix/lib"
-  elif test "x$prefix" != "xNONE" ; then
-    LIBFLAC_LIBS="-L$libdir"
-  fi
-
-  LIBFLAC_LIBS="$LIBFLAC_LIBS -lFLAC -lm"
-
-  if test "x$libFLAC_includes" != "x" ; then
-    LIBFLAC_CFLAGS="-I$libFLAC_includes"
-  elif test "x$libFLAC_prefix" != "x" ; then
-    LIBFLAC_CFLAGS="-I$libFLAC_prefix/include"
-  elif test "$prefix" != "xNONE"; then
-    LIBFLAC_CFLAGS="-I$prefix/include"
-  fi
-
-  AC_MSG_CHECKING(for libFLAC)
-  no_libFLAC=""
-
-
-  if test "x$enable_libFLACtest" = "xyes" ; then
-    ac_save_CFLAGS="$CFLAGS"
-    ac_save_CXXFLAGS="$CXXFLAGS"
-    ac_save_LIBS="$LIBS"
-    CFLAGS="$CFLAGS $LIBFLAC_CFLAGS"
-    CXXFLAGS="$CXXFLAGS $LIBFLAC_CFLAGS"
-    LIBS="$LIBS $LIBFLAC_LIBS"
-dnl
-dnl Now check if the installed libFLAC is sufficiently new.
-dnl
-      rm -f conf.libFLACtest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <FLAC/format.h>
-
-int main ()
-{
-  system("touch conf.libFLACtest");
-  return 0;
-}
-
-],, no_libFLAC=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-  fi
-
-  if test "x$no_libFLAC" = "x" ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$1], , :, [$1])     
-  else
-     AC_MSG_RESULT(no)
-     if test -f conf.libFLACtest ; then
-       :
-     else
-       echo "*** Could not run libFLAC test program, checking why..."
-       CFLAGS="$CFLAGS $LIBFLAC_CFLAGS"
-       LIBS="$LIBS $LIBFLAC_LIBS"
-       AC_TRY_LINK([
-#include <stdio.h>
-#include <FLAC/format.h>
-],     [ return 0; ],
-       [ echo "*** The test program compiled, but did not run. This usually means"
-       echo "*** that the run-time linker is not finding libFLAC or finding the wrong"
-       echo "*** version of libFLAC. If it is not finding libFLAC, you'll need to set your"
-       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-       echo "*** is required on your system"
-       echo "***"
-       echo "*** If you have an old version installed, it is best to remove it, although"
-       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-       [ echo "*** The test program failed to compile or link. See the file config.log for the"
-       echo "*** exact error that occured. This usually means libFLAC was incorrectly installed"
-       echo "*** or that you have moved libFLAC since it was installed. In the latter case, you"
-       echo "*** may want to edit the libFLAC-config script: $LIBFLAC_CONFIG" ])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-     LIBFLAC_CFLAGS=""
-     LIBFLAC_LIBS=""
-     ifelse([$2], , :, [$2])
-  fi
-  AC_SUBST(LIBFLAC_CFLAGS)
-  AC_SUBST(LIBFLAC_LIBS)
-  rm -f conf.libFLACtest
-])
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 47 Debian 1.5.20-2 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-	         [m4_ifdef([AC_PROVIDE_$1],
-		           [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_LINKER_BOILERPLATE
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-[$]*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
-     $SED '/^$/d' conftest.err >conftest.er2
-     if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
-else
-    ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp
-       $SED '/^$/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
-else
-    ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
-     $SED '/^$/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-knetbsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-#- set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | kfreebsd*-gnu | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-      */dev/null* | *'Invalid file or object type'*)
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-        ;;
-      *)
-	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	*/dev/null*)
-	  lt_cv_path_NM="$tmp_nm -p"
-	  break
-	  ;;
-	*)
-	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	  continue # so that we can try to find one that supports BSD flags
-	  ;;
-	esac
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ---------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# --------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-    ;;
-  esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | grep "[[ 	]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ 	]]" >/dev/null; then :
-  else
-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-# Report which librarie types wil actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
-
-  AC_PROG_LD
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
-      output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
-      fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | kfreebsd*-gnu | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      case $host_cpu in
-      hppa*64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-        ;;
-      ia64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        ;;
-      *)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
-    esac
-
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    ia64*|hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC*)
-        # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    fi
-    output_verbose_link_cmd='echo'
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sco*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	  *)
-	    # The C++ compiler is used as linker so we must use $wl
-	    # flag to pass the commands to the underlying system
-	    # linker. We must also pass each convience library through
-	    # to the system linker between allextract/defaultextract.
-	    # The C++ compiler will combine linker options so we
-	    # cannot just pass the convience library names through
-	    # without $wl.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-	    ;;
-	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	fi
-	;;
-    esac
-    ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-solaris*)
-  case $cc_basename in
-  CC*)
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
-    ;;
-  esac
-esac
-])
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="      program t\n      end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
-
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDRT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix4* | aix5*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | kfreebsd*-gnu | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux*)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC*)
-	    # Portland Group C++ compiler.
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      sco*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      unixware*)
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-
-    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    linux*)
-      case $cc_basename in
-      icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix4* | aix5*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux*)
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    linux*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-  	if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-  	fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    bsdi[[45]]*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    hpux10* | hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
-      fi
-      ;;
-
-    os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    sco3.2v5*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
-    solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
- 	# The compiler driver will combine linker options so we
- 	# cannot just pass the convience library names through
- 	# without $wl, iff we do not link with $LD.
- 	# Luckily, gcc supports the same syntax we need for Sun Studio.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
- 	case $wlarc in
- 	'')
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
- 	*)
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- 	esac ;;
-      esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4.2uw2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
-
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv5*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-      ;;
-
-    uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-  fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_AC_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $rm conftest*
-      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-      ;;
-    esac
-  fi
-  ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_MSG_RESULT([$SED])
-])
-
-# Configure paths for SDL
-# Sam Lantinga 9/21/99
-# stolen from Manish Singh
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
-dnl
-AC_DEFUN([AM_PATH_SDL],
-[dnl 
-dnl Get the cflags and libraries from the sdl-config script
-dnl
-AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
-            sdl_prefix="$withval", sdl_prefix="")
-AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
-            sdl_exec_prefix="$withval", sdl_exec_prefix="")
-AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
-		    , enable_sdltest=yes)
-
-  if test x$sdl_exec_prefix != x ; then
-     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
-     fi
-  fi
-  if test x$sdl_prefix != x ; then
-     sdl_args="$sdl_args --prefix=$sdl_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_prefix/bin/sdl-config
-     fi
-  fi
-
-  AC_REQUIRE([AC_CANONICAL_TARGET])
-  PATH="$prefix/bin:$prefix/usr/bin:$PATH"
-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
-  min_sdl_version=ifelse([$1], ,0.11.0,$1)
-  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
-  no_sdl=""
-  if test "$SDL_CONFIG" = "no" ; then
-    no_sdl=yes
-  else
-    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
-    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
-
-    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_sdltest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $SDL_CFLAGS"
-      LIBS="$LIBS $SDL_LIBS"
-dnl
-dnl Now check if the installed SDL is sufficiently new. (Also sanity
-dnl checks the results of sdl-config to some extent
-dnl
-      rm -f conf.sdltest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "SDL.h"
-
-char*
-my_strdup (char *str)
-{
-  char *new_str;
-  
-  if (str)
-    {
-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
-      strcpy (new_str, str);
-    }
-  else
-    new_str = NULL;
-  
-  return new_str;
-}
-
-int main (int argc, char *argv[])
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  /* This hangs on some systems (?)
-  system ("touch conf.sdltest");
-  */
-  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_sdl_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_sdl_version");
-     exit(1);
-   }
-
-   if (($sdl_major_version > major) ||
-      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
-      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
-    {
-      return 0;
-    }
-  else
-    {
-      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
-      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
-      printf("*** best to upgrade to the required version.\n");
-      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
-      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
-      printf("*** config.cache before re-running configure\n");
-      return 1;
-    }
-}
-
-],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_sdl" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$SDL_CONFIG" = "no" ; then
-       echo "*** The sdl-config script installed by SDL could not be found"
-       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the SDL_CONFIG environment variable to the"
-       echo "*** full path to sdl-config."
-     else
-       if test -f conf.sdltest ; then
-        :
-       else
-          echo "*** Could not run SDL test program, checking why..."
-          CFLAGS="$CFLAGS $SDL_CFLAGS"
-          LIBS="$LIBS $SDL_LIBS"
-          AC_TRY_LINK([
-#include <stdio.h>
-#include "SDL.h"
-
-int main(int argc, char *argv[])
-{ return 0; }
-#undef  main
-#define main K_and_R_C_main
-],      [ return 0; ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding SDL or finding the wrong"
-          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
-          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
-          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     SDL_CFLAGS=""
-     SDL_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(SDL_CFLAGS)
-  AC_SUBST(SDL_LIBS)
-  rm -f conf.sdltest
-])
-
-# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.6])])
-
-# Figure out how to run the assembler.                      -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_PROG_AS
-# ----------
-AC_DEFUN([AM_PROG_AS],
-[# By default we simply use the C compiler to build assembly code.
-AC_REQUIRE([AC_PROG_CC])
-test "${CCAS+set}" = set || CCAS=$CC
-test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-AC_ARG_VAR([CCAS],      [assembler compiler command (defaults to CC)])
-AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
-])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $1 | $1:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/codeset.m4])
-m4_include([m4/gettext.m4])
-m4_include([m4/glibc21.m4])
-m4_include([m4/iconv.m4])
-m4_include([m4/intdiv0.m4])
-m4_include([m4/inttypes-pri.m4])
-m4_include([m4/inttypes.m4])
-m4_include([m4/inttypes_h.m4])
-m4_include([m4/lcmessage.m4])
-m4_include([m4/lib-ld.m4])
-m4_include([m4/lib-link.m4])
-m4_include([m4/lib-prefix.m4])
-m4_include([m4/nls.m4])
-m4_include([m4/pkg.m4])
-m4_include([m4/po.m4])
-m4_include([m4/progtest.m4])
-m4_include([m4/stdint_h.m4])
-m4_include([m4/uintmax_t.m4])
-m4_include([m4/ulonglong.m4])
-m4_include([acinclude.m4])
--- a/compile	Thu Oct 27 12:50:36 2005 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,142 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand `-c -o'.
-
-scriptversion=2005-05-14.22
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand `-c -o'.
-Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file `INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile $scriptversion"
-    exit $?
-    ;;
-esac
-
-ofile=
-cfile=
-eat=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as `compile cc -o foo foo.c'.
-	# So we strip `-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no `-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # `.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use `[/.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
--- a/depcomp	Thu Oct 27 12:50:36 2005 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,530 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2005-07-09.11
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-  stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
--- a/ltmain.sh	Thu Oct 27 12:50:36 2005 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,6538 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION="1.5.20 Debian 1.5.20-2"
-TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
-  setopt NO_GLOB_SUBST
-fi
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
-      if test "X$win32_nmres" = "Ximport" ; then
-        win32_libid_type="x86 archive import"
-      else
-        win32_libid_type="x86 archive static"
-      fi
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
-    fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
-    fi
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xdir="$my_gentop/$my_xlib"
-
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $status
-      fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    $echo
-    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
-    $echo "This is free software; see the source for copying conditions.  There is NO"
-    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-    done
-    exit $?
-    ;;
-
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    $echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
-    else
-      $echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
-    else
-      $echo "disable static libraries"
-    fi
-    exit $?
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --tag) prevopt="--tag" prev=tag ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
-	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
-	  done
-	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
-	  continue
-	  ;;
-
-	* )
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
-      ;;
-    target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *)
-      # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
-    case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
-    lobj=${xdir}$objdir/$objname
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-      $echo "$srcfile" > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	status=$?
-	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $status
-	fi
-      fi
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command="$command -o $lobj"
-      fi
-
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
-      fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
-    else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
-    fi
-
-    $run $mv "${libobj}T" "${libobj}"
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
-
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	else
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	fi
-	build_libtool_libs=no
-	build_old_libs=yes
-	prefer_static_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
-
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-        darwin_framework)
-	  compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  prev=
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -framework|-arch)
-        prev=darwin_framework
-        compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-        continue
-        ;;
-
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-mingw* | *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
-	    continue
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
-	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
-	prev=xcompiler
-	continue
-	;;
-
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
-
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        if test "$with_gcc" = "yes" ; then
-          compiler_flags="$compiler_flags $arg"
-        fi
-        continue
-        ;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -XCClinker)
-	prev=xcclinker
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
-
-	  if test -z "$pic_object" || \
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
-	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
-
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $status
-      fi
-    fi
-
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
-    *)
-      duplicate_compiler_generated_deps=$duplicate_deps
-      ;;
-    esac
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link)
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
-	esac
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    compiler_flags="$compiler_flags $deplib"
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
-	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		  library_names=
-		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-	        ;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
-		;;
-	      pass_all)
-		valid_a_lib=yes
-		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
-
-
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  continue
-	fi # $pass = conv
-
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  fi
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
-	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $echo "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
-	      else
-	        add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
-		case $host in
-		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
-		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
-		  fi
-		  path=""
-		  ;;
-		*)
-		  path="-L$path"
-		  ;;
-		esac
-		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
-	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
-
-	case $vinfo_number in
-	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  darwin|linux|osf|windows)
-	    current=`expr $number_major + $number_minor`
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
-	    age="$number_minor"
-	    revision="$number_minor"
-	    ;;
-	  *)
-	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	irix | nonstopux)
-	  major=`expr $current - $age + 1`
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=.`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
-
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
-		   continue
-		 fi
-	       fi
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
-      done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
- 	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  $LTCC -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
-		    i=""
-		    ;;
-		  esac
-	        fi
-		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		$LTCC -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
-		    else
-		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
-	    done
-	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
-	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	tmp_deplibs=
-	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
-		esac
-	done
-	deplibs="$tmp_deplibs"
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
-	  fi
-	fi
-	
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
-	  fi
-	fi
-
-	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  delfiles=
-	  last_robj=
-	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
-	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
-	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
-
-	  $echo "creating a temporary reloadable object file: $output"
-
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
-	    fi
-	  fi
-
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
-	    lt_exit=$?
-
-	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	    fi
-
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
-	    fi
-	  fi
-
-	  exit $EXIT_SUCCESS
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-	else
-	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
-
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	;;
-      esac
-
-      case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
-      esac
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	    else
-	      $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-
-
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	status=$?
-
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
-	  *) exeext= ;;
-	esac
-	case $host in
-	  *cygwin* | *mingw* )
-	    cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
-	    cwrapper=`$echo ${output}.exe`
-	    $rm $cwrappersource $cwrapper
-	    trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-
-  program_name = (char *) xstrdup ((char *) basename (argv[0]));
-  newargz = XMALLOC(char *, argc+2);
-EOF
-
-	    cat >> $cwrappersource <<EOF
-  newargz[0] = "$SHELL";
-EOF
-
-	    cat >> $cwrappersource <<"EOF"
-  newargz[1] = fnqualify(argv[0]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-EOF
-
-	    cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-
-	    cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-char *
-basename (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha (name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return (char *) base;
-}
-
-char *
-fnqualify(const char *path)
-{
-  size_t size;
-  char *p;
-  char tmp[LT_PATHMAX + 1];
-
-  assert(path != NULL);
-
-  /* Is it qualified already? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha (path[0]) && path[1] == ':')
-    return xstrdup (path);
-#endif
-  if (IS_DIR_SEPARATOR (path[0]))
-    return xstrdup (path);
-
-  /* prepend the current directory */
-  /* doesn't handle '~' */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
-  p = XMALLOC(char, size);
-  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
-  return p;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert(str != NULL);
-  assert(pat != NULL);
-
-  len = strlen(str);
-  patlen = strlen(pat);
-
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-	  # we should really use a build-platform specific compiler
-	  # here, but OTOH, the wrappers (shell script and this C one)
-	  # are only useful if you want to execute the "real" binary.
-	  # Since the "real" binary is built for $host, then this
-	  # wrapper might as well be built for $host, too.
-	  $run $LTCC -s -o $cwrapper $cwrappersource
-	  ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  $echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$old_deplibs $non_pic_objects"
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
-
-	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
-      else
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
-	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  $echo "copying selected object files to avoid basename conflicts..."
-
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
-	  fi
-
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
-	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
-	    esac
-	  done
-	fi
-
-	eval cmds=\"$old_archive_cmds\"
-
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  for obj in $save_oldobjs
-	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
-	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-	  fi
-	fi
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlfiles="$newdlfiles $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlprefiles="$newdlprefiles $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      save_umask=`umask`
-	      umask 0077
-	      if $mkdir "$tmpdir"; then
-	        umask $save_umask
-	      else
-	        umask $save_umask
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
-
-    $echo "----------------------------------------------------------------------"
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "----------------------------------------------------------------------"
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    rmdirs=
-
-    origobjdir="$objdir"
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
-	objdir="$origobjdir"
-      else
-	objdir="$dir/$origobjdir"
-      fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-
-	  if test "$mode" = uninstall; then
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
-	  # Read the .lo file
-	  . $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	if test "$mode" = clean ; then
-	  noexename=$name
-	  case $file in
-	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
-	    # $file with .exe has already been added to rmfiles,
-	    # add $file without .exe
-	    rmfiles="$rmfiles $file"
-	    ;;
-	  esac
-	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
-
-	    # note $name still contains .exe if it was in $file originally
-	    # as does the version of $file that was added into $rmfiles
-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      rmfiles="$rmfiles $objdir/lt-$name"
-	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-	    fi
-	  fi
-	fi
-	;;
-      esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
-    done
-    objdir="$origobjdir"
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
-      fi
-    done
-
-    exit $exit_status
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
-
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
-  exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End: