annotate nt/makefile.nt @ 42490:0715d86d229c

Extensive changes to support multiple xscheme buffers: (run-scheme): Break up into new functions to facilitate starting processes in other buffers. (xscheme-start, xscheme-read-command-line): New functions. (start-scheme, select-scheme) (default-xscheme-runlight) (global-set-scheme-interaction-buffer) (local-set-scheme-interaction-buffer) (local-clear-scheme-interaction-buffer) (exit-scheme-interaction-mode) (verify-xscheme-buffer): New functions. (xscheme-process-name, xscheme-buffer-name) (xscheme-runlight): New internal vars. (default-xscheme-runlight): New const. (xscheme-start-process): Add args for the process/buffer names. (reset-scheme): Pass process/buffer names. (scheme-interaction-mode): Initialize new local vars. (reset-scheme, xscheme-send-string-2, xscheme-process-running-p) (xscheme-select-process-buffer, xscheme-process-buffer) (xscheme-send-region, xscheme-send-char, xscheme-send-interrupt) (xscheme-goto-output-point, xscheme-write-message-1): Use new var xscheme-process-name. (xscheme-start-process): Initialize xscheme-process-name and xscheme-buffer-name in the process buffer. Pass buffer name to xscheme-modeline-initialize. (xscheme-modeline-initialize): Add argument to specify buffer name for mode-line vars. (xscheme-process-sentinel): Make sure sentinel is run in the process buffer so it sees its local vars. (xscheme-process-filter-initialize, xscheme-set-runlight): More elaborate logic to handle multiple-buffer mode lines. (xscheme-enter-input-wait): Re-enable control-G handler upon entering input wait. (scheme-interaction-mode): Add arg to preserve local vars. (xscheme-enter-interaction-mode) (xscheme-enter-debugger-mode): Preserve local vars. (xscheme-start-process): Clobber local vars. (scheme-interaction-mode-commands): Allow end user to add commands to scheme-interaction-mode keymap. (scheme-interaction-mode-commands-alist): New variable. (xscheme-send-string): Don't use insert-before-markers. Implement a per-buffer kill ring: (xscheme-insert-expression) (xscheme-rotate-yank-pointer, xscheme-yank) (xscheme-yank-pop, xscheme-yank-push): New functions. (xscheme-expressions-ring) (xscheme-expressions-ring-yank-pointer) (xscheme-expressions-ring-max): New variables. (xscheme-send-string-1): Call xscheme-insert-expression to save expression in ring. (xscheme-yank-previous-send): Now an alias for xscheme-yank. (xscheme-previous-send): Deleted variable. (xscheme-send-string-2, xscheme-send-char, xscheme-send-proceed, xscheme-send-control-g-interrupt): Use process-send-string rather than send-string. (xscheme-send-region): Insert a newline after an expression that is submitted in the interaction buffer, for consistency with recent changes to Edwin. (xscheme-delete-output): New function mimics comint-delete-output. (xscheme-last-input-end): New internal variable. (xscheme-process-filter-output): Update xscheme-last-input-end. (xscheme-send-control-g-interrupt): Make sure that xscheme-control-g-disabled-p is looked up in the right buffer. (xscheme-enable-control-g): Clear C-g message if visible. (xscheme-control-g-message-string): New internal var. (xscheme-send-control-g-interrupt): Use new var. (xscheme-send-control-g-interrupt, xscheme-send-interrupt): Delay after sending interrupt in order to work around race condition. (xscheme-send-control-g-interrupt, xscheme-send-interrupt) (xscheme-send-char): Use xscheme-send-char rather than send-string to send single char. (xscheme-process-filter, xscheme-process-filter-alist): Add support for evaluating expressions outside of the call-excursion. (xscheme-process-filter:string-action-noexcursion): New func. (xscheme-write-value): Change output string to match that used by Edwin. (xscheme-coerce-prompt): Don't write a space after a command prompt. The PROMPT-FOR-COMMAND- procedures will take care of this for us. (reset-scheme): Delete process after killing it.

#
#  Top level makefile for building GNU Emacs on Windows NT
#  Copyright (c) 1993-2000 Free Software Foundation, Inc.
#
#  This file is part of GNU Emacs.
#  
#  GNU Emacs is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2, or (at your option)
#  any later version.
#  
#  GNU Emacs is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#  
#  You should have received a copy of the GNU General Public License
#  along with GNU Emacs; see the file COPYING.  If not, write to
#  the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
#  Boston, MA 02111-1307, USA.
#
#   Geoff Voelker ([e-mail])	11-20-93
#						  9-6-94
!include makefile.def

ALL		= addpm ddeclient runemacs cmdproxy addsection preprep
!if $(MSVCNT11)
TRES		= $(BLD)\emacs.res
!else
TRES		= $(BLD)\emacs.rbj
!endif

addpm:		  $(BLD) $(BLD)\addpm.exe
$(BLD)\addpm.obj: addpm.c
$(BLD)\addpm.exe: $(BLD)\addpm.obj
		  $(LINK) -out:$@ -subsystem:console -entry:mainCRTStartup \
		  $(SYS_LDFLAGS) $** $(BASE_LIBS) $(ADVAPI32) user32.lib

ddeclient:	  $(BLD) $(BLD)\ddeclient.exe
$(BLD)\ddeclient.obj: ddeclient.c
$(BLD)\ddeclient.exe: $(BLD)\ddeclient.obj
		  $(LINK) -out:$@ -subsystem:console -entry:mainCRTStartup \
		  $(SYS_LDFLAGS) $** $(BASE_LIBS) $(ADVAPI32) user32.lib

cmdproxy:	  $(BLD) $(BLD)\cmdproxy.exe
$(BLD)\cmdproxy.obj: cmdproxy.c
$(BLD)\cmdproxy.exe: $(BLD)\cmdproxy.obj
		  $(LINK) -out:$@ -subsystem:console -entry:mainCRTStartup \
		  $(SYS_LDFLAGS) $** $(BASE_LIBS) user32.lib

addsection:	  $(BLD) $(BLD)\addsection.exe
$(BLD)\addsection.obj: addsection.c
$(BLD)\addsection.exe: $(BLD)\addsection.obj
		  $(LINK) -debug:full -out:$@ -subsystem:console -entry:mainCRTStartup \
		  $(SYS_LDFLAGS) $** $(BASE_LIBS) user32.lib

preprep:	  $(BLD) $(BLD)\preprep.exe
$(BLD)\preprep.obj: preprep.c
$(BLD)\preprep.exe: $(BLD)\preprep.obj
		  $(LINK) -debug:full -out:$@ -subsystem:console -entry:mainCRTStartup \
		  $(SYS_LDFLAGS) $** $(BASE_LIBS)

#
# The resource file.  NT 3.10 requires the use of cvtres; even though
# it is not necessary on later versions, it is still ok to use it.
#
$(TRES):	emacs.rc
		$(RC) -Fo$(BLD)\emacs.res $**
!if !$(MSVCNT11)
		$(CVTRES) -r -$(ARCH) -o $@ $(BLD)\emacs.res
!endif

runemacs:	  $(BLD) $(BLD)\runemacs.exe
$(BLD)\runemacs.obj: runemacs.c
$(BLD)\runemacs.exe: $(BLD)\runemacs.obj $(TRES)
		  $(LINK) -out:$@ -subsystem:windows -entry:WinMainCRTStartup \
		  $(SYS_LDFLAGS) $** $(BASE_LIBS) $(ADVAPI32) user32.lib

# Since Windows 95 does not support multiple commands on one command line
# (e.g., in for loops), we cannot use for loops any more.
# SUBDIRS	      = lib-src src lisp

#
# Build emacs
#
BUILD_CMD	= $(MAKE) $(MFLAGS) -f makefile.nt all
all:		$(BLD) $(ALL)
		cd ..\lib-src
		$(BUILD_CMD)
		cd ..\src
		$(BUILD_CMD)
		cd ..\lisp
		$(BUILD_CMD)
		cd ..\leim
		if exist makefile.nt $(BUILD_CMD)
		cd ..\nt

BOOTSTRAP_CMD	= $(MAKE) $(MFLAGS) -f makefile.nt bootstrap
bootstrap:	$(BLD) $(ALL)
		cd ..\src
		$(BOOTSTRAP_CMD)
		$(BOOTCLEAN_CMD)
		cd ..\lisp
		$(BOOTSTRAP_CMD)
		cd ..\nt

BOOTCLEAN_CMD	= $(MAKE) $(MFLAGS) -f makefile.nt bootstrap-clean
bootstrap-clean:
		cd ..\src
		$(BOOTCLEAN_CMD)
		cd ..\lisp
		$(BOOTCLEAN_CMD)

$(INSTALL_DIR):
		- mkdir $(INSTALL_DIR)

$(INSTALL_DIR)\bin:
		- mkdir $(INSTALL_DIR)\bin

#
# Build and install emacs in INSTALL_DIR
#
INSTALL_CMD	= $(MAKE) -f makefile.nt install
install:	all $(INSTALL_DIR)
		cd ..\lib-src
		$(INSTALL_CMD)
		cd ..\src
		$(INSTALL_CMD)
		cd ..\lisp
		$(INSTALL_CMD)
		cd ..\leim
		if exist makefile.nt $(INSTALL_CMD)
		cd ..\nt		
		- $(CP) $(BLD)\addpm.exe $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\ddeclient.exe $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\cmdproxy.exe $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\runemacs.exe $(INSTALL_DIR)\bin
		- $(CP) ..\lib-src\fns-*.el $(INSTALL_DIR)\bin
		- $(ADDPM) $(INSTALL_DIR)
		- $(DEL) ..\same-dir.tst
		- $(DEL) $(INSTALL_DIR)\same-dir.tst
		- mkdir $(INSTALL_DIR)\etc\icons
		- $(CP_DIR) icons $(INSTALL_DIR)\etc\icons
		echo SameDirTest > $(INSTALL_DIR)\same-dir.tst
		if not exist ..\same-dir.tst $(MAKE) -f makefile.nt real_install
		- $(DEL) ..\same-dir.tst
		- $(DEL) $(INSTALL_DIR)\same-dir.tst

#
# This installs executables from ..\bin into the installation directory
# without building anything.
#
fast_install:
		- mkdir $(INSTALL_DIR)\data
		$(CP) ..\lib-src\DOC $(INSTALL_DIR)\etc
		- mkdir $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\addpm.exe $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\ddeclient.exe $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\cmdproxy.exe $(INSTALL_DIR)\bin
		- $(CP) $(BLD)\runemacs.exe $(INSTALL_DIR)\bin
		- $(CP) ..\lib-src\fns-*.el $(INSTALL_DIR)\bin
		- $(DEL) ..\same-dir.tst
		- $(DEL) $(INSTALL_DIR)\same-dir.tst
		echo SameDirTest > $(INSTALL_DIR)\same-dir.tst
		if not exist ..\same-dir.tst $(CP) ..\bin\emacs.exe $(INSTALL_DIR)\bin
		if not exist ..\same-dir.tst $(CP) ..\bin\etags.exe $(INSTALL_DIR)\bin
		if not exist ..\same-dir.tst $(CP) ..\bin\ctags.exe $(INSTALL_DIR)\bin
		if not exist ..\same-dir.tst $(MAKE) -f makefile.nt real_install
		- $(DEL) ..\same-dir.tst
		- $(DEL) $(INSTALL_DIR)\same-dir.tst

real_install:
		- $(DEL) ..\same-dir.tst
		- $(DEL) $(INSTALL_DIR)\same-dir.tst
		echo SameDirTest > $(INSTALL_DIR)\same-dir.tst
		- mkdir $(INSTALL_DIR)\etc
		- mkdir $(INSTALL_DIR)\info
		- mkdir $(INSTALL_DIR)\lock
		- mkdir $(INSTALL_DIR)\data
		- mkdir $(INSTALL_DIR)\site-lisp
		- mkdir $(INSTALL_DIR)\etc\icons
		- $(CP_DIR) icons $(INSTALL_DIR)\etc\icons
		if not exist ..\same-dir.tst $(CP_DIR) ..\etc $(INSTALL_DIR)\etc
		if not exist ..\same-dir.tst $(CP_DIR) ..\info $(INSTALL_DIR)\info
		- $(DEL) ..\same-dir.tst
		- $(DEL) $(INSTALL_DIR)\same-dir.tst

#
# Maintenance
# 
CLEAN_CMD	= $(MAKE) -f makefile.nt clean
clean:
		- $(DEL) *~ *.pdb
		- $(DEL) *.orig
		- $(DEL) *.rej
		- $(DEL) *.crlf
		- $(DEL_TREE) deleted
		- $(DEL_TREE) obj
		- $(DEL_TREE) obj-spd
		- $(DEL) ..\etc\DOC ..\etc\DOC-X
		cd ..\lib-src
		$(CLEAN_CMD)
		cd ..\src
		$(CLEAN_CMD)
		cd ..\lisp
		$(CLEAN_CMD)
		cd ..\leim
		if exist makefile.nt $(CLEAN_CMD)
		cd ..\nt

realclean: clean
		- $(DEL_TREE) ..\bin