Mercurial > emacs
view nt/makefile.nt @ 42490:0715d86d229c
Extensive changes to support multiple xscheme buffers:
(run-scheme): Break up into new functions to facilitate starting
processes in other buffers.
(xscheme-start, xscheme-read-command-line): New functions.
(start-scheme, select-scheme)
(default-xscheme-runlight)
(global-set-scheme-interaction-buffer)
(local-set-scheme-interaction-buffer)
(local-clear-scheme-interaction-buffer)
(exit-scheme-interaction-mode)
(verify-xscheme-buffer): New functions.
(xscheme-process-name, xscheme-buffer-name)
(xscheme-runlight): New internal vars.
(default-xscheme-runlight): New const.
(xscheme-start-process): Add args for the process/buffer names.
(reset-scheme): Pass process/buffer names.
(scheme-interaction-mode): Initialize new local vars.
(reset-scheme, xscheme-send-string-2, xscheme-process-running-p)
(xscheme-select-process-buffer, xscheme-process-buffer)
(xscheme-send-region, xscheme-send-char, xscheme-send-interrupt)
(xscheme-goto-output-point, xscheme-write-message-1): Use new
var xscheme-process-name.
(xscheme-start-process): Initialize xscheme-process-name and
xscheme-buffer-name in the process buffer. Pass buffer name to
xscheme-modeline-initialize.
(xscheme-modeline-initialize): Add argument to specify buffer name
for mode-line vars.
(xscheme-process-sentinel): Make sure sentinel is run in the
process buffer so it sees its local vars.
(xscheme-process-filter-initialize, xscheme-set-runlight): More
elaborate logic to handle multiple-buffer mode lines.
(xscheme-enter-input-wait): Re-enable control-G handler upon
entering input wait.
(scheme-interaction-mode): Add arg to preserve local vars.
(xscheme-enter-interaction-mode)
(xscheme-enter-debugger-mode): Preserve local vars.
(xscheme-start-process): Clobber local vars.
(scheme-interaction-mode-commands): Allow end user to add commands
to scheme-interaction-mode keymap.
(scheme-interaction-mode-commands-alist): New variable.
(xscheme-send-string): Don't use insert-before-markers.
Implement a per-buffer kill ring:
(xscheme-insert-expression)
(xscheme-rotate-yank-pointer, xscheme-yank)
(xscheme-yank-pop, xscheme-yank-push): New functions.
(xscheme-expressions-ring)
(xscheme-expressions-ring-yank-pointer)
(xscheme-expressions-ring-max): New variables.
(xscheme-send-string-1): Call xscheme-insert-expression to save
expression in ring.
(xscheme-yank-previous-send): Now an alias for xscheme-yank.
(xscheme-previous-send): Deleted variable.
(xscheme-send-string-2, xscheme-send-char, xscheme-send-proceed,
xscheme-send-control-g-interrupt): Use process-send-string rather
than send-string.
(xscheme-send-region): Insert a newline after an expression that
is submitted in the interaction buffer, for consistency with
recent changes to Edwin.
(xscheme-delete-output): New function mimics comint-delete-output.
(xscheme-last-input-end): New internal variable.
(xscheme-process-filter-output): Update xscheme-last-input-end.
(xscheme-send-control-g-interrupt): Make sure that
xscheme-control-g-disabled-p is looked up in the right buffer.
(xscheme-enable-control-g): Clear C-g message if visible.
(xscheme-control-g-message-string): New internal var.
(xscheme-send-control-g-interrupt): Use new var.
(xscheme-send-control-g-interrupt, xscheme-send-interrupt): Delay
after sending interrupt in order to work around race condition.
(xscheme-send-control-g-interrupt, xscheme-send-interrupt)
(xscheme-send-char): Use xscheme-send-char rather than send-string
to send single char.
(xscheme-process-filter, xscheme-process-filter-alist): Add
support for evaluating expressions outside of the call-excursion.
(xscheme-process-filter:string-action-noexcursion): New func.
(xscheme-write-value): Change output string to match that used by Edwin.
(xscheme-coerce-prompt): Don't write a space after a command
prompt. The PROMPT-FOR-COMMAND- procedures will take care of this
for us.
(reset-scheme): Delete process after killing it.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Wed, 02 Jan 2002 23:50:46 +0000 |
parents | 8045cccd8f3c |
children | 23a1cea22d13 |
line wrap: on
line source
# # Top level makefile for building GNU Emacs on Windows NT # Copyright (c) 1993-2000 Free Software Foundation, Inc. # # This file is part of GNU Emacs. # # GNU Emacs is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Emacs; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # # Geoff Voelker (voelker@cs.washington.edu) 11-20-93 # 9-6-94 !include makefile.def ALL = addpm ddeclient runemacs cmdproxy addsection preprep !if $(MSVCNT11) TRES = $(BLD)\emacs.res !else TRES = $(BLD)\emacs.rbj !endif addpm: $(BLD) $(BLD)\addpm.exe $(BLD)\addpm.obj: addpm.c $(BLD)\addpm.exe: $(BLD)\addpm.obj $(LINK) -out:$@ -subsystem:console -entry:mainCRTStartup \ $(SYS_LDFLAGS) $** $(BASE_LIBS) $(ADVAPI32) user32.lib ddeclient: $(BLD) $(BLD)\ddeclient.exe $(BLD)\ddeclient.obj: ddeclient.c $(BLD)\ddeclient.exe: $(BLD)\ddeclient.obj $(LINK) -out:$@ -subsystem:console -entry:mainCRTStartup \ $(SYS_LDFLAGS) $** $(BASE_LIBS) $(ADVAPI32) user32.lib cmdproxy: $(BLD) $(BLD)\cmdproxy.exe $(BLD)\cmdproxy.obj: cmdproxy.c $(BLD)\cmdproxy.exe: $(BLD)\cmdproxy.obj $(LINK) -out:$@ -subsystem:console -entry:mainCRTStartup \ $(SYS_LDFLAGS) $** $(BASE_LIBS) user32.lib addsection: $(BLD) $(BLD)\addsection.exe $(BLD)\addsection.obj: addsection.c $(BLD)\addsection.exe: $(BLD)\addsection.obj $(LINK) -debug:full -out:$@ -subsystem:console -entry:mainCRTStartup \ $(SYS_LDFLAGS) $** $(BASE_LIBS) user32.lib preprep: $(BLD) $(BLD)\preprep.exe $(BLD)\preprep.obj: preprep.c $(BLD)\preprep.exe: $(BLD)\preprep.obj $(LINK) -debug:full -out:$@ -subsystem:console -entry:mainCRTStartup \ $(SYS_LDFLAGS) $** $(BASE_LIBS) # # The resource file. NT 3.10 requires the use of cvtres; even though # it is not necessary on later versions, it is still ok to use it. # $(TRES): emacs.rc $(RC) -Fo$(BLD)\emacs.res $** !if !$(MSVCNT11) $(CVTRES) -r -$(ARCH) -o $@ $(BLD)\emacs.res !endif runemacs: $(BLD) $(BLD)\runemacs.exe $(BLD)\runemacs.obj: runemacs.c $(BLD)\runemacs.exe: $(BLD)\runemacs.obj $(TRES) $(LINK) -out:$@ -subsystem:windows -entry:WinMainCRTStartup \ $(SYS_LDFLAGS) $** $(BASE_LIBS) $(ADVAPI32) user32.lib # Since Windows 95 does not support multiple commands on one command line # (e.g., in for loops), we cannot use for loops any more. # SUBDIRS = lib-src src lisp # # Build emacs # BUILD_CMD = $(MAKE) $(MFLAGS) -f makefile.nt all all: $(BLD) $(ALL) cd ..\lib-src $(BUILD_CMD) cd ..\src $(BUILD_CMD) cd ..\lisp $(BUILD_CMD) cd ..\leim if exist makefile.nt $(BUILD_CMD) cd ..\nt BOOTSTRAP_CMD = $(MAKE) $(MFLAGS) -f makefile.nt bootstrap bootstrap: $(BLD) $(ALL) cd ..\src $(BOOTSTRAP_CMD) $(BOOTCLEAN_CMD) cd ..\lisp $(BOOTSTRAP_CMD) cd ..\nt BOOTCLEAN_CMD = $(MAKE) $(MFLAGS) -f makefile.nt bootstrap-clean bootstrap-clean: cd ..\src $(BOOTCLEAN_CMD) cd ..\lisp $(BOOTCLEAN_CMD) $(INSTALL_DIR): - mkdir $(INSTALL_DIR) $(INSTALL_DIR)\bin: - mkdir $(INSTALL_DIR)\bin # # Build and install emacs in INSTALL_DIR # INSTALL_CMD = $(MAKE) -f makefile.nt install install: all $(INSTALL_DIR) cd ..\lib-src $(INSTALL_CMD) cd ..\src $(INSTALL_CMD) cd ..\lisp $(INSTALL_CMD) cd ..\leim if exist makefile.nt $(INSTALL_CMD) cd ..\nt - $(CP) $(BLD)\addpm.exe $(INSTALL_DIR)\bin - $(CP) $(BLD)\ddeclient.exe $(INSTALL_DIR)\bin - $(CP) $(BLD)\cmdproxy.exe $(INSTALL_DIR)\bin - $(CP) $(BLD)\runemacs.exe $(INSTALL_DIR)\bin - $(CP) ..\lib-src\fns-*.el $(INSTALL_DIR)\bin - $(ADDPM) $(INSTALL_DIR) - $(DEL) ..\same-dir.tst - $(DEL) $(INSTALL_DIR)\same-dir.tst - mkdir $(INSTALL_DIR)\etc\icons - $(CP_DIR) icons $(INSTALL_DIR)\etc\icons echo SameDirTest > $(INSTALL_DIR)\same-dir.tst if not exist ..\same-dir.tst $(MAKE) -f makefile.nt real_install - $(DEL) ..\same-dir.tst - $(DEL) $(INSTALL_DIR)\same-dir.tst # # This installs executables from ..\bin into the installation directory # without building anything. # fast_install: - mkdir $(INSTALL_DIR)\data $(CP) ..\lib-src\DOC $(INSTALL_DIR)\etc - mkdir $(INSTALL_DIR)\bin - $(CP) $(BLD)\addpm.exe $(INSTALL_DIR)\bin - $(CP) $(BLD)\ddeclient.exe $(INSTALL_DIR)\bin - $(CP) $(BLD)\cmdproxy.exe $(INSTALL_DIR)\bin - $(CP) $(BLD)\runemacs.exe $(INSTALL_DIR)\bin - $(CP) ..\lib-src\fns-*.el $(INSTALL_DIR)\bin - $(DEL) ..\same-dir.tst - $(DEL) $(INSTALL_DIR)\same-dir.tst echo SameDirTest > $(INSTALL_DIR)\same-dir.tst if not exist ..\same-dir.tst $(CP) ..\bin\emacs.exe $(INSTALL_DIR)\bin if not exist ..\same-dir.tst $(CP) ..\bin\etags.exe $(INSTALL_DIR)\bin if not exist ..\same-dir.tst $(CP) ..\bin\ctags.exe $(INSTALL_DIR)\bin if not exist ..\same-dir.tst $(MAKE) -f makefile.nt real_install - $(DEL) ..\same-dir.tst - $(DEL) $(INSTALL_DIR)\same-dir.tst real_install: - $(DEL) ..\same-dir.tst - $(DEL) $(INSTALL_DIR)\same-dir.tst echo SameDirTest > $(INSTALL_DIR)\same-dir.tst - mkdir $(INSTALL_DIR)\etc - mkdir $(INSTALL_DIR)\info - mkdir $(INSTALL_DIR)\lock - mkdir $(INSTALL_DIR)\data - mkdir $(INSTALL_DIR)\site-lisp - mkdir $(INSTALL_DIR)\etc\icons - $(CP_DIR) icons $(INSTALL_DIR)\etc\icons if not exist ..\same-dir.tst $(CP_DIR) ..\etc $(INSTALL_DIR)\etc if not exist ..\same-dir.tst $(CP_DIR) ..\info $(INSTALL_DIR)\info - $(DEL) ..\same-dir.tst - $(DEL) $(INSTALL_DIR)\same-dir.tst # # Maintenance # CLEAN_CMD = $(MAKE) -f makefile.nt clean clean: - $(DEL) *~ *.pdb - $(DEL) *.orig - $(DEL) *.rej - $(DEL) *.crlf - $(DEL_TREE) deleted - $(DEL_TREE) obj - $(DEL_TREE) obj-spd - $(DEL) ..\etc\DOC ..\etc\DOC-X cd ..\lib-src $(CLEAN_CMD) cd ..\src $(CLEAN_CMD) cd ..\lisp $(CLEAN_CMD) cd ..\leim if exist makefile.nt $(CLEAN_CMD) cd ..\nt realclean: clean - $(DEL_TREE) ..\bin