Mercurial > emacs
annotate src/s/hpux10-20.h @ 108125:13415f222ad9
Use $CRT_DIR in more places.
* configure.in (--with-crt-dir): Doc fix (now valid for all platforms).
(CRT_DIR): On (powerpc64|sparc64)-*-linux-gnu*, default to /usr/lib64.
On hpux10-20, default to /lib.
* src/m/amdx86-64.h (START_FILES, LIB_STANDARD): Change the logic around,
since the defaults (set by the system file) are fine in most cases.
[GNU_LINUX, __OpenBSD__, __NetBSD__, __APPLE__]: Remove sections.
* src/m/ibms390x.h (START_FILES, LIB_STANDARD):
* src/m/macppc.h (START_FILES, LIB_STANDARD) [GNU_LINUX]:
* src/m/sparc.h (START_FILES, LIB_STANDARD) [__linux__]:
Remove definitions, since they are set correctly in s/gnu-linux.h.
* src/s/freebsd.h (START_FILES, LIB_STANDARD):
* src/s/gnu-linux.h (START_FILES, LIB_STANDARD):
* src/s/hpux10-20.h (START_FILES):
* src/s/netbsd.h (START_FILES, LIB_STANDARD, START_FILES_1, END_FILES_1):
Use $CRT_DIR in place of fixed /usr/lib, /lib directories.
* src/Makefile.in: Comment.
author | Glenn Morris <rgm@gnu.org> |
---|---|
date | Mon, 26 Apr 2010 20:14:14 -0700 |
parents | a1271a8f377e |
children | 1c3ecdb885b5 |
rev | line source |
---|---|
96303 | 1 /* System description file for hpux version 10.20. |
2 Copyright (C) 1999, 2001, 2002, 2003, 2004, 2005, 2006, 2007, | |
106815 | 3 2008, 2009, 2010 Free Software Foundation, Inc. |
96303 | 4 |
5 This file is part of GNU Emacs. | |
6 | |
7 GNU Emacs is free software: you can redistribute it and/or modify | |
8 it under the terms of the GNU General Public License as published by | |
9 the Free Software Foundation, either version 3 of the License, or | |
10 (at your option) any later version. | |
11 | |
12 GNU Emacs is distributed in the hope that it will be useful, | |
13 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 GNU General Public License for more details. | |
16 | |
17 You should have received a copy of the GNU General Public License | |
18 along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ | |
19 | |
20 | |
21 #define RUN_TIME_REMAP | |
22 | |
23 /* | |
24 * Define symbols to identify the version of Unix this is. | |
25 * Define all the symbols that apply correctly. | |
26 */ | |
27 | |
28 #define USG /* System III, System V, etc */ | |
29 | |
30 #define USG5 | |
31 | |
32 #define HPUX | |
33 | |
34 /* SYSTEM_TYPE should indicate the kind of system you are using. | |
35 It sets the Lisp variable system-type. */ | |
36 | |
37 #define SYSTEM_TYPE "hpux" | |
38 | |
39 /* Letter to use in finding device name of first pty, | |
40 if system supports pty's. 'p' means it is /dev/ptym/ptyp0 */ | |
41 | |
42 #define FIRST_PTY_LETTER 'p' | |
43 | |
44 /* | |
45 * Define HAVE_TERMIO if the system provides sysV-style ioctls | |
46 * for terminal control. | |
47 */ | |
48 | |
49 #define HAVE_TERMIO | |
50 | |
51 /* | |
52 * Define HAVE_PTYS if the system supports pty devices. | |
53 */ | |
54 | |
55 #define HAVE_PTYS | |
56 | |
57 /* Define HAVE_SOCKETS if system supports 4.2-compatible sockets. */ | |
58 | |
59 #define HAVE_SOCKETS | |
60 | |
61 /* Define this symbol if your system has the functions bcopy, etc. | |
62 * s800 and later versions of s300 (s200) kernels have equivalents | |
63 * of the BSTRING functions of BSD. If your s200 kernel doesn't have | |
64 * em comment out this section. | |
65 */ | |
66 | |
67 #define BSTRING | |
68 | |
69 /* Define CLASH_DETECTION if you want lock files to be written | |
70 so that Emacs can tell instantly when you try to modify | |
71 a file that someone else has modified in his Emacs. */ | |
72 | |
73 #define CLASH_DETECTION | |
74 | |
75 /* The symbol in the kernel where the load average is found | |
76 depends on the cpu type, so we let the m- files define LDAV_SYMBOL. */ | |
77 | |
78 /* Special hacks needed to make Emacs run on this system. */ | |
79 | |
80 /* Use the system provided termcap(3) library */ | |
81 #define TERMINFO | |
82 | |
83 /* In hpux, the symbol SIGIO is defined, but the feature | |
84 doesn't work in the way Emacs needs it to. */ | |
85 | |
86 #define BROKEN_SIGIO | |
87 | |
88 /* Some additional system facilities exist. */ | |
89 | |
90 #define HAVE_PERROR /* Delete this line for version 6. */ | |
91 | |
107797
702528fcbb6a
Simplify code for HP machines.
Dan Nicolaescu <dann@ics.uci.edu>
parents:
106815
diff
changeset
|
92 #define UNEXEC unexhp9k800.o |
702528fcbb6a
Simplify code for HP machines.
Dan Nicolaescu <dann@ics.uci.edu>
parents:
106815
diff
changeset
|
93 |
702528fcbb6a
Simplify code for HP machines.
Dan Nicolaescu <dann@ics.uci.edu>
parents:
106815
diff
changeset
|
94 /* Include the file bsdtty.h, since this machine has job control. */ |
702528fcbb6a
Simplify code for HP machines.
Dan Nicolaescu <dann@ics.uci.edu>
parents:
106815
diff
changeset
|
95 #define NEED_BSDTTY |
702528fcbb6a
Simplify code for HP machines.
Dan Nicolaescu <dann@ics.uci.edu>
parents:
106815
diff
changeset
|
96 |
96303 | 97 /* This is how to get the device name of the tty end of a pty. */ |
98 #define PTY_TTY_NAME_SPRINTF \ | |
99 sprintf (pty_name, "/dev/pty/tty%c%x", c, i); | |
100 | |
101 /* This is how to get the device name of the control end of a pty. */ | |
102 #define PTY_NAME_SPRINTF \ | |
103 sprintf (pty_name, "/dev/ptym/pty%c%x", c, i); | |
104 | |
105 /* This triggers a conditional in xfaces.c. */ | |
106 #define XOS_NEEDS_TIME_H | |
107 | |
108 #ifndef HAVE_LIBXMU | |
109 /* HP-UX doesn't supply Xmu. */ | |
110 #define LIBXMU | |
111 | |
112 #endif | |
113 | |
114 /* Assar Westerlund <assar@sics.se> says this is necessary for | |
115 HP-UX 10.20, and that it works for HP-UX 0 as well. */ | |
116 #define NO_EDITRES | |
117 | |
118 /* Tested in getloadavg.c. */ | |
119 #define HAVE_PSTAT_GETDYNAMIC | |
120 | |
121 /* Eric Backus <ericb@lsid.hp.com> says, HP-UX 9.x on HP 700 machines | |
122 has a broken `rint' in some library versions including math library | |
123 version number A.09.05. | |
124 | |
125 You can fix the math library by installing patch number PHSS_4630. | |
126 But we can fix it more reliably for Emacs like this. */ | |
127 #undef HAVE_RINT | |
128 | |
129 /* We have to go this route, rather than hpux9's approach of renaming the | |
130 functions via macros. The system's stdlib.h has fully prototyped | |
131 declarations, which yields a conflicting definition of srand48; it | |
132 tries to redeclare what was once srandom to be srand48. So we go | |
133 with HAVE_LRAND48 being defined. */ | |
134 #undef srandom | |
135 #undef random | |
136 #undef HAVE_RANDOM | |
137 | |
138 /* AlainF 20-Jul-1996 says this is right. */ | |
139 #define KERNEL_FILE "/stand/vmunix" | |
140 | |
141 #define LIBS_SYSTEM -l:libdld.sl | |
142 | |
143 /* Rainer Malzbender <rainer@displaytech.com> says definining | |
144 HAVE_XRMSETDATABASE allows Emacs to compile on HP-UX 10.20 | |
145 using GCC. */ | |
146 | |
147 #ifndef HAVE_XRMSETDATABASE | |
148 #define HAVE_XRMSETDATABASE | |
149 #endif | |
150 | |
151 /* Make sure we get select from libc rather than from libcurses | |
152 because libcurses on HPUX 10.10 has a broken version of select. | |
153 We used to use -lc -lcurses, but this may be cleaner. */ | |
154 #define LIBS_TERMCAP -ltermcap | |
155 | |
156 /* 2000-11-21: Temporarily disable Unix 98 large file support found by | |
157 configure. It fails on HPUX 11, at least, because it enables | |
158 header sections which lose when `static' is defined away, as it is | |
159 on HP-UX. (You get duplicate symbol errors on linking). */ | |
160 | |
161 #undef _FILE_OFFSET_BITS | |
49891 | 162 |
163 /* otherwise sigunblock wont be defined */ | |
164 #define POSIX_SIGNALS | |
165 | |
108032 | 166 /* Define NO_REMAP if memory segmentation makes it not work well |
167 to change the boundary between the text section and data section | |
168 when Emacs is dumped. If you define this, the preloaded Lisp | |
169 code will not be sharable; but that's better than failing completely. */ | |
170 | |
171 #define NO_REMAP | |
172 | |
108125 | 173 #define START_FILES pre-crt0.o $(CRT_DIR)/crt0.o |
108074
39488fd097e8
Simplify STARTFILES definition.
Dan Nicolaescu <dann@ics.uci.edu>
parents:
108032
diff
changeset
|
174 |
108032 | 175 /* Define VIRT_ADDR_VARIES if the virtual addresses of |
176 pure and impure space as loaded can vary, and even their | |
177 relative order cannot be relied on. | |
178 | |
179 Otherwise Emacs assumes that text space precedes data space, | |
180 numerically. */ | |
181 | |
182 #define VIRT_ADDR_VARIES | |
183 | |
184 /* the data segment on this machine always starts at address 0x40000000. */ | |
185 | |
186 #define DATA_SEG_BITS 0x40000000 | |
187 | |
188 #define DATA_START 0x40000000 | |
189 #define TEXT_START 0x00000000 | |
190 | |
191 /* Data type of load average, as read out of kmem. */ | |
192 | |
193 #define LOAD_AVE_TYPE double | |
194 | |
195 /* Convert that into an integer that is 100 for a load average of 1.0 */ | |
196 | |
197 #define LOAD_AVE_CVT(x) ((int) (x * 100.0)) | |
198 | |
199 /* The symbol in the kernel where the load average is found | |
200 is named _avenrun. At this time there are two major flavors | |
201 of hp-ux (there is the s800 and s300 (s200) flavors). The | |
202 differences are thusly moved to the corresponding machine description file. | |
203 */ | |
204 | |
205 /* no underscore please */ | |
206 #define LDAV_SYMBOL "avenrun" | |
207 | |
208 /* On USG systems these have different names. */ | |
209 | |
210 #define index strchr | |
211 #define rindex strrchr | |
212 | |
52401 | 213 /* arch-tag: 8d8dcbf1-ca9b-48a1-94be-b750de18a5c6 |
214 (do not change this comment) */ |