Mercurial > emacs
annotate etc/DEBUG @ 58058:3e39ea92134a
Fixed bug:
** line-spacing and garbage in fringe
From: SAITO Takuya <tabmore@rivo.mediatti.net>
Date: Mon, 31 May 2004 02:08:05 +0900 (JST)
Start emacs -Q and evaluate below with C-xC-e:
(let ((lines 2)
(spacing 1))
(setq line-spacing spacing
indicate-buffer-boundaries t)
(insert (make-string (window-height) ?\n))
(goto-char (point-min))
(message (make-string (* (window-width) lines) ?.))
(scroll-up 1))
then, garbage is displayed in right fringe.
Above code reproduces this bug with
(frame-parameter nil 'font)
=> "-Adobe-Courier-Medium-R-Normal--12-120-75-75-M-70-ISO8859-1"
If you use different font, you may need different value of
`lines' and/or `spacing'.
author | Kim F. Storm <storm@cua.dk> |
---|---|
date | Mon, 08 Nov 2004 23:37:16 +0000 |
parents | 7e6072c66e67 |
children | eae7969f1b06 ff0e824afa37 |
rev | line source |
---|---|
25853 | 1 Debugging GNU Emacs |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
2 Copyright (c) 1985, 2000, 2001 Free Software Foundation, Inc. |
25853 | 3 |
4 Permission is granted to anyone to make or distribute verbatim copies | |
5 of this document as received, in any medium, provided that the | |
6 copyright notice and permission notice are preserved, | |
7 and that the distributor grants the recipient permission | |
8 for further redistribution as permitted by this notice. | |
9 | |
10 Permission is granted to distribute modified versions | |
11 of this document, or of portions of it, | |
12 under the above conditions, provided also that they | |
13 carry prominent notices stating who last changed them. | |
14 | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
15 [People who debug Emacs on Windows using native Windows debuggers |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
16 should read the Windows-specific section near the end of this |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
17 document.] |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
18 |
43432
7fe131ded6d9
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
43106
diff
changeset
|
19 ** When you debug Emacs with GDB, you should start it in the directory |
7fe131ded6d9
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
43106
diff
changeset
|
20 where you built Emacs. That directory has a .gdbinit file that defines |
7fe131ded6d9
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
43106
diff
changeset
|
21 various "user-defined" commands for debugging Emacs. |
7fe131ded6d9
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
43106
diff
changeset
|
22 |
7fe131ded6d9
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
43106
diff
changeset
|
23 ** It is a good idea to run Emacs under GDB (or some other suitable |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
24 debugger) *all the time*. Then, when Emacs crashes, you will be able |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
25 to debug the live process, not just a core dump. (This is especially |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
26 important on systems which don't support core files, and instead print |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
27 just the registers and some stack addresses.) |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
28 |
43432
7fe131ded6d9
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
43106
diff
changeset
|
29 ** If Emacs hangs, or seems to be stuck in some infinite loop, typing |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
30 "kill -TSTP PID", where PID is the Emacs process ID, will cause GDB to |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
31 kick in, provided that you run under GDB. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
32 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
33 ** Getting control to the debugger |
25853 | 34 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
35 `Fsignal' is a very useful place to put a breakpoint in. |
25853 | 36 All Lisp errors go through there. |
37 | |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
38 It is useful, when debugging, to have a guaranteed way to return to |
44813
927a6a3e6c8f
Tell them to use C-z, not C-c, to stop Emacs under X.
Eli Zaretskii <eliz@gnu.org>
parents:
43432
diff
changeset
|
39 the debugger at any time. When using X, this is easy: type C-z at the |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
40 window where Emacs is running under GDB, and it will stop Emacs just |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
41 as it would stop any ordinary program. When Emacs is running in a |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
42 terminal, things are not so easy. |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
43 |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
44 The src/.gdbinit file in the Emacs distribution arranges for SIGINT |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
45 (C-g in Emacs) to be passed to Emacs and not give control back to GDB. |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
46 On modern POSIX systems, you can override that with this command: |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
47 |
43106
cd4549362019
Fix a typo in "handle SIGINT" command.
Eli Zaretskii <eliz@gnu.org>
parents:
41839
diff
changeset
|
48 handle SIGINT stop nopass |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
49 |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
50 After this `handle' command, SIGINT will return control to GDB. If |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
51 you want the C-g to cause a QUIT within Emacs as well, omit the |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
52 `nopass'. |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
53 |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
54 A technique that can work when `handle SIGINT' does not is to store |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
55 the code for some character into the variable stop_character. Thus, |
25853 | 56 |
57 set stop_character = 29 | |
58 | |
59 makes Control-] (decimal code 29) the stop character. | |
60 Typing Control-] will cause immediate stop. You cannot | |
61 use the set command until the inferior process has been started. | |
62 Put a breakpoint early in `main', or suspend the Emacs, | |
63 to get an opportunity to do the set command. | |
64 | |
65 ** Examining Lisp object values. | |
66 | |
67 When you have a live process to debug, and it has not encountered a | |
68 fatal error, you can use the GDB command `pr'. First print the value | |
69 in the ordinary way, with the `p' command. Then type `pr' with no | |
70 arguments. This calls a subroutine which uses the Lisp printer. | |
71 | |
57307 | 72 You can also use `pp value' to print the emacs value directly. |
73 | |
74 Note: It is not a good idea to try `pr' or `pp' if you know that Emacs | |
75 is in deep trouble: its stack smashed (e.g., if it encountered SIGSEGV | |
76 due to stack overflow), or crucial data structures, such as `obarray', | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
77 corrupted, etc. In such cases, the Emacs subroutine called by `pr' |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
78 might make more damage, like overwrite some data that is important for |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
79 debugging the original problem. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
80 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
81 Also, on some systems it is impossible to use `pr' if you stopped |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
82 Emacs while it was inside `select'. This is in fact what happens if |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
83 you stop Emacs while it is waiting. In such a situation, don't try to |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
84 use `pr'. Instead, use `s' to step out of the system call. Then |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
85 Emacs will be between instructions and capable of handling `pr'. |
25853 | 86 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
87 If you can't use `pr' command, for whatever reason, you can fall back |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
88 on lower-level commands. Use the `xtype' command to print out the |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
89 data type of the last data value. Once you know the data type, use |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
90 the command that corresponds to that type. Here are these commands: |
25853 | 91 |
92 xint xptr xwindow xmarker xoverlay xmiscfree xintfwd xboolfwd xobjfwd | |
93 xbufobjfwd xkbobjfwd xbuflocal xbuffer xsymbol xstring xvector xframe | |
94 xwinconfig xcompiled xcons xcar xcdr xsubr xprocess xfloat xscrollbar | |
95 | |
96 Each one of them applies to a certain type or class of types. | |
97 (Some of these types are not visible in Lisp, because they exist only | |
98 internally.) | |
99 | |
100 Each x... command prints some information about the value, and | |
101 produces a GDB value (subsequently available in $) through which you | |
102 can get at the rest of the contents. | |
103 | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
104 In general, most of the rest of the contents will be additional Lisp |
25853 | 105 objects which you can examine in turn with the x... commands. |
106 | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
107 Even with a live process, these x... commands are useful for |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
108 examining the fields in a buffer, window, process, frame or marker. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
109 Here's an example using concepts explained in the node "Value History" |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
110 of the GDB manual to print the variable frame from this line in |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
111 xmenu.c: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
112 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
113 buf.frame_or_window = frame; |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
114 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
115 First, use these commands: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
116 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
117 cd src |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
118 gdb emacs |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
119 b xmenu.c:1296 |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
120 r -q |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
121 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
122 Then type C-x 5 2 to create a new frame, and it hits the breakpoint: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
123 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
124 (gdb) p frame |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
125 $1 = 1077872640 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
126 (gdb) xtype |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
127 Lisp_Vectorlike |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
128 PVEC_FRAME |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
129 (gdb) xframe |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
130 $2 = (struct frame *) 0x3f0800 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
131 (gdb) p *$ |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
132 $3 = { |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
133 size = 536871989, |
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
134 next = 0x366240, |
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
135 name = 809661752, |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
136 [...] |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
137 } |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
138 (gdb) p $3->name |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
139 $4 = 809661752 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
140 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
141 Now we can use `pr' to print the name of the frame: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
142 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
143 (gdb) pr |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
144 "emacs@steenrod.math.nwu.edu" |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
145 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
146 The Emacs C code heavily uses macros defined in lisp.h. So suppose |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
147 we want the address of the l-value expression near the bottom of |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
148 `add_command_key' from keyboard.c: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
149 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
150 XVECTOR (this_command_keys)->contents[this_command_key_count++] = key; |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
151 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
152 XVECTOR is a macro, and therefore GDB does not know about it. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
153 GDB cannot evaluate "p XVECTOR (this_command_keys)". |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
154 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
155 However, you can use the xvector command in GDB to get the same |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
156 result. Here is how: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
157 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
158 (gdb) p this_command_keys |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
159 $1 = 1078005760 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
160 (gdb) xvector |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
161 $2 = (struct Lisp_Vector *) 0x411000 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
162 0 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
163 (gdb) p $->contents[this_command_key_count] |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
164 $3 = 1077872640 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
165 (gdb) p &$ |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
166 $4 = (int *) 0x411008 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
167 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
168 Here's a related example of macros and the GDB `define' command. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
169 There are many Lisp vectors such as `recent_keys', which contains the |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
170 last 100 keystrokes. We can print this Lisp vector |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
171 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
172 p recent_keys |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
173 pr |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
174 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
175 But this may be inconvenient, since `recent_keys' is much more verbose |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
176 than `C-h l'. We might want to print only the last 10 elements of |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
177 this vector. `recent_keys' is updated in keyboard.c by the command |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
178 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
179 XVECTOR (recent_keys)->contents[recent_keys_index] = c; |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
180 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
181 So we define a GDB command `xvector-elts', so the last 10 keystrokes |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
182 are printed by |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
183 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
184 xvector-elts recent_keys recent_keys_index 10 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
185 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
186 where you can define xvector-elts as follows: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
187 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
188 define xvector-elts |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
189 set $i = 0 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
190 p $arg0 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
191 xvector |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
192 set $foo = $ |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
193 while $i < $arg2 |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
194 p $foo->contents[$arg1-($i++)] |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
195 pr |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
196 end |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
197 document xvector-elts |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
198 Prints a range of elements of a Lisp vector. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
199 xvector-elts v n i |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
200 prints `i' elements of the vector `v' ending at the index `n'. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
201 end |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
202 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
203 ** Getting Lisp-level backtrace information within GDB |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
204 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
205 The most convenient way is to use the `xbacktrace' command. This |
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
206 shows the names of the Lisp functions that are currently active. |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
207 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
208 If that doesn't work (e.g., because the `backtrace_list' structure is |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
209 corrupted), type "bt" at the GDB prompt, to produce the C-level |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
210 backtrace, and look for stack frames that call Ffuncall. Select them |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
211 one by one in GDB, by typing "up N", where N is the appropriate number |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
212 of frames to go up, and in each frame that calls Ffuncall type this: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
213 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
214 p *args |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
215 pr |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
216 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
217 This will print the name of the Lisp function called by that level |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
218 of function calling. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
219 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
220 By printing the remaining elements of args, you can see the argument |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
221 values. Here's how to print the first argument: |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
222 |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
223 p args[1] |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
224 pr |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
225 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
226 If you do not have a live process, you can use xtype and the other |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
227 x... commands such as xsymbol to get such information, albeit less |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
228 conveniently. For example: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
229 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
230 p *args |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
231 xtype |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
232 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
233 and, assuming that "xtype" says that args[0] is a symbol: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
234 |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
235 xsymbol |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
236 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
237 ** Debugging what happens while preloading and dumping Emacs |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
238 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
239 Type `gdb temacs' and start it with `r -batch -l loadup dump'. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
240 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
241 If temacs actually succeeds when running under GDB in this way, do not |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
242 try to run the dumped Emacs, because it was dumped with the GDB |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
243 breakpoints in it. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
244 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
245 ** Debugging `temacs' |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
246 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
247 Debugging `temacs' is useful when you want to establish whether a |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
248 problem happens in an undumped Emacs. To run `temacs' under a |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
249 debugger, type "gdb temacs", then start it with `r -batch -l loadup'. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
250 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
251 ** If you encounter X protocol errors |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
252 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
253 Try evaluating (x-synchronize t). That puts Emacs into synchronous |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
254 mode, where each Xlib call checks for errors before it returns. This |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
255 mode is much slower, but when you get an error, you will see exactly |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
256 which call really caused the error. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
257 |
36962
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
258 You can start Emacs in a synchronous mode by invoking it with the -xrm |
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
259 option, like this: |
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
260 |
37534
3ea5075dc420
Fix a typo in the "emacs -xrm" command line. Reported by Kenichi Handa.
Eli Zaretskii <eliz@gnu.org>
parents:
37509
diff
changeset
|
261 emacs -xrm "emacs.synchronous: true" |
36962
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
262 |
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
263 Setting a breakpoint in the function `x_error_quitter' and looking at |
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
264 the backtrace when Emacs stops inside that function will show what |
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
265 code causes the X protocol errors. |
9c7eb7e6bf3e
Document the use of -xrm to start EMacs in synchronous mode.
Eli Zaretskii <eliz@gnu.org>
parents:
36625
diff
changeset
|
266 |
41839
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
267 Some bugs related to the X protocol disappear when Emacs runs in a |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
268 synchronous mode. To track down those bugs, we suggest the following |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
269 procedure: |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
270 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
271 - Run Emacs under a debugger and put a breakpoint inside the |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
272 primitive function which, when called from Lisp, triggers the X |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
273 protocol errors. For example, if the errors happen when you |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
274 delete a frame, put a breakpoint inside `Fdelete_frame'. |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
275 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
276 - When the breakpoint breaks, step through the code, looking for |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
277 calls to X functions (the ones whose names begin with "X" or |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
278 "Xt" or "Xm"). |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
279 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
280 - Insert calls to `XSync' before and after each call to the X |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
281 functions, like this: |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
282 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
283 XSync (f->output_data.x->display_info->display, 0); |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
284 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
285 where `f' is the pointer to the `struct frame' of the selected |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
286 frame, normally available via XFRAME (selected_frame). (Most |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
287 functions which call X already have some variable that holds the |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
288 pointer to the frame, perhaps called `f' or `sf', so you shouldn't |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
289 need to compute it.) |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
290 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
291 If your debugger can call functions in the program being debugged, |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
292 you should be able to issue the calls to `XSync' without recompiling |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
293 Emacs. For example, with GDB, just type: |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
294 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
295 call XSync (f->output_data.x->display_info->display, 0) |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
296 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
297 before and immediately after the suspect X calls. If your |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
298 debugger does not support this, you will need to add these pairs |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
299 of calls in the source and rebuild Emacs. |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
300 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
301 Either way, systematically step through the code and issue these |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
302 calls until you find the first X function called by Emacs after |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
303 which a call to `XSync' winds up in the function |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
304 `x_error_quitter'. The first X function call for which this |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
305 happens is the one that generated the X protocol error. |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
306 |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
307 - You should now look around this offending X call and try to figure |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
308 out what is wrong with it. |
902e47b4907b
Advice how to debug X protocol error which disappear in the
Eli Zaretskii <eliz@gnu.org>
parents:
40348
diff
changeset
|
309 |
49489 | 310 ** If Emacs causes errors or memory leaks in your X server |
311 | |
312 You can trace the traffic between Emacs and your X server with a tool | |
313 like xmon, available at ftp://ftp.x.org/contrib/devel_tools/. | |
314 | |
315 Xmon can be used to see exactly what Emacs sends when X protocol errors | |
316 happen. If Emacs causes the X server memory usage to increase you can | |
317 use xmon to see what items Emacs creates in the server (windows, | |
318 graphical contexts, pixmaps) and what items Emacs delete. If there | |
319 are consistently more creations than deletions, the type of item | |
320 and the activity you do when the items get created can give a hint where | |
321 to start debugging. | |
322 | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
323 ** If the symptom of the bug is that Emacs fails to respond |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
324 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
325 Don't assume Emacs is `hung'--it may instead be in an infinite loop. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
326 To find out which, make the problem happen under GDB and stop Emacs |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
327 once it is not responding. (If Emacs is using X Windows directly, you |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
328 can stop Emacs by typing C-z at the GDB job.) Then try stepping with |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
329 `step'. If Emacs is hung, the `step' command won't return. If it is |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
330 looping, `step' will return. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
331 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
332 If this shows Emacs is hung in a system call, stop it again and |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
333 examine the arguments of the call. If you report the bug, it is very |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
334 important to state exactly where in the source the system call is, and |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
335 what the arguments are. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
336 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
337 If Emacs is in an infinite loop, try to determine where the loop |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
338 starts and ends. The easiest way to do this is to use the GDB command |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
339 `finish'. Each time you use it, Emacs resumes execution until it |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
340 exits one stack frame. Keep typing `finish' until it doesn't |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
341 return--that means the infinite loop is in the stack frame which you |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
342 just tried to finish. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
343 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
344 Stop Emacs again, and use `finish' repeatedly again until you get back |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
345 to that frame. Then use `next' to step through that frame. By |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
346 stepping, you will see where the loop starts and ends. Also, examine |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
347 the data being used in the loop and try to determine why the loop does |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
348 not exit when it should. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
349 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
350 ** If certain operations in Emacs are slower than they used to be, here |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
351 is some advice for how to find out why. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
352 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
353 Stop Emacs repeatedly during the slow operation, and make a backtrace |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
354 each time. Compare the backtraces looking for a pattern--a specific |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
355 function that shows up more often than you'd expect. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
356 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
357 If you don't see a pattern in the C backtraces, get some Lisp |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
358 backtrace information by typing "xbacktrace" or by looking at Ffuncall |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
359 frames (see above), and again look for a pattern. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
360 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
361 When using X, you can stop Emacs at any time by typing C-z at GDB. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
362 When not using X, you can do this with C-g. On non-Unix platforms, |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
363 such as MS-DOS, you might need to press C-BREAK instead. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
364 |
25853 | 365 ** If GDB does not run and your debuggers can't load Emacs. |
366 | |
367 On some systems, no debugger can load Emacs with a symbol table, | |
368 perhaps because they all have fixed limits on the number of symbols | |
369 and Emacs exceeds the limits. Here is a method that can be used | |
370 in such an extremity. Do | |
371 | |
372 nm -n temacs > nmout | |
373 strip temacs | |
374 adb temacs | |
375 0xd:i | |
376 0xe:i | |
377 14:i | |
378 17:i | |
379 :r -l loadup (or whatever) | |
380 | |
381 It is necessary to refer to the file `nmout' to convert | |
382 numeric addresses into symbols and vice versa. | |
383 | |
384 It is useful to be running under a window system. | |
385 Then, if Emacs becomes hopelessly wedged, you can create | |
386 another window to do kill -9 in. kill -ILL is often | |
387 useful too, since that may make Emacs dump core or return | |
388 to adb. | |
389 | |
390 | |
391 ** Debugging incorrect screen updating. | |
392 | |
393 To debug Emacs problems that update the screen wrong, it is useful | |
394 to have a record of what input you typed and what Emacs sent to the | |
395 screen. To make these records, do | |
396 | |
397 (open-dribble-file "~/.dribble") | |
398 (open-termscript "~/.termscript") | |
399 | |
400 The dribble file contains all characters read by Emacs from the | |
401 terminal, and the termscript file contains all characters it sent to | |
402 the terminal. The use of the directory `~/' prevents interference | |
403 with any other user. | |
404 | |
405 If you have irreproducible display problems, put those two expressions | |
406 in your ~/.emacs file. When the problem happens, exit the Emacs that | |
407 you were running, kill it, and rename the two files. Then you can start | |
408 another Emacs without clobbering those files, and use it to examine them. | |
34594
9b989029cccf
Add note aboute using `inverse-video' to detect excessive screen redraw.
Miles Bader <miles@gnu.org>
parents:
32523
diff
changeset
|
409 |
9b989029cccf
Add note aboute using `inverse-video' to detect excessive screen redraw.
Miles Bader <miles@gnu.org>
parents:
32523
diff
changeset
|
410 An easy way to see if too much text is being redrawn on a terminal is to |
9b989029cccf
Add note aboute using `inverse-video' to detect excessive screen redraw.
Miles Bader <miles@gnu.org>
parents:
32523
diff
changeset
|
411 evaluate `(setq inverse-video t)' before you try the operation you think |
9b989029cccf
Add note aboute using `inverse-video' to detect excessive screen redraw.
Miles Bader <miles@gnu.org>
parents:
32523
diff
changeset
|
412 will cause too much redrawing. This doesn't refresh the screen, so only |
9b989029cccf
Add note aboute using `inverse-video' to detect excessive screen redraw.
Miles Bader <miles@gnu.org>
parents:
32523
diff
changeset
|
413 newly drawn text is in inverse video. |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
414 |
37509
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
415 The Emacs display code includes special debugging code, but it is |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
416 normally disabled. You can enable it by building Emacs with the |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
417 pre-processing symbol GLYPH_DEBUG defined. Here's one easy way, |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
418 suitable for Unix and GNU systems, to build such a debugging version: |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
419 |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
420 MYCPPFLAGS='-DGLYPH_DEBUG=1' make |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
421 |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
422 Building Emacs like that activates many assertions which scrutinize |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
423 display code operation more than Emacs does normally. (To see the |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
424 code which tests these assertions, look for calls to the `xassert' |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
425 macros.) Any assertion that is reported to fail should be |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
426 investigated. |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
427 |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
428 Building with GLYPH_DEBUG defined also defines several helper |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
429 functions which can help debugging display code. One such function is |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
430 `dump_glyph_matrix'. If you run Emacs under GDB, you can print the |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
431 contents of any glyph matrix by just calling that function with the |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
432 matrix as its argument. For example, the following command will print |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
433 the contents of the current matrix of the window whose pointer is in |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
434 `w': |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
435 |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
436 (gdb) p dump_glyph_matrix (w->current_matrix, 2) |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
437 |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
438 (The second argument 2 tells dump_glyph_matrix to print the glyphs in |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
439 a long form.) You can dump the selected window's current glyph matrix |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
440 interactively with "M-x dump-glyph-matrix RET"; see the documentation |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
441 of this function for more details. |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
442 |
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
443 Several more functions for debugging display code are available in |
37565 | 444 Emacs compiled with GLYPH_DEBUG defined; type "C-h f dump- TAB" and |
445 "C-h f trace- TAB" to see the full list. | |
37509
ed5dca63a0ed
Document some of the facilities for debugging display code, including
Eli Zaretskii <eliz@gnu.org>
parents:
37481
diff
changeset
|
446 |
57307 | 447 When you debug display problems running emacs under X, you can use |
448 the `ff' command to flush all pending display updates to the screen. | |
449 | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
450 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
451 ** Debugging LessTif |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
452 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
453 If you encounter bugs whereby Emacs built with LessTif grabs all mouse |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
454 and keyboard events, or LessTif menus behave weirdly, it might be |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
455 helpful to set the `DEBUGSOURCES' and `DEBUG_FILE' environment |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
456 variables, so that one can see what LessTif was doing at this point. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
457 For instance |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
49489
diff
changeset
|
458 |
36625
08aed53e171c
DEBUGSOURCES should contain a list of files, separated by colons.
Gerd Moellmann <gerd@gnu.org>
parents:
35861
diff
changeset
|
459 export DEBUGSOURCES="RowColumn.c:MenuShell.c:MenuUtil.c" |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
460 export DEBUG_FILE=/usr/tmp/LESSTIF_TRACE |
35720
c6ae90d82552
Clarify the instructions for debugging LessTif.
Eli Zaretskii <eliz@gnu.org>
parents:
35655
diff
changeset
|
461 emacs & |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
462 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
463 causes LessTif to print traces from the three named source files to a |
35720
c6ae90d82552
Clarify the instructions for debugging LessTif.
Eli Zaretskii <eliz@gnu.org>
parents:
35655
diff
changeset
|
464 file in `/usr/tmp' (that file can get pretty large). The above should |
c6ae90d82552
Clarify the instructions for debugging LessTif.
Eli Zaretskii <eliz@gnu.org>
parents:
35655
diff
changeset
|
465 be typed at the shell prompt before invoking Emacs, as shown by the |
c6ae90d82552
Clarify the instructions for debugging LessTif.
Eli Zaretskii <eliz@gnu.org>
parents:
35655
diff
changeset
|
466 last line above. |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
467 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
468 Running GDB from another terminal could also help with such problems. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
469 You can arrange for GDB to run on one machine, with the Emacs display |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
470 appearing on another. Then, when the bug happens, you can go back to |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
471 the machine where you started GDB and use the debugger from there. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
472 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
473 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
474 ** Debugging problems which happen in GC |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
475 |
37015
f8dd0e40dc34
Make it clear that last_marked[] holds pointers to Lisp objects, not
Eli Zaretskii <eliz@gnu.org>
parents:
36962
diff
changeset
|
476 The array `last_marked' (defined on alloc.c) can be used to display up |
f8dd0e40dc34
Make it clear that last_marked[] holds pointers to Lisp objects, not
Eli Zaretskii <eliz@gnu.org>
parents:
36962
diff
changeset
|
477 to 500 last objects marked by the garbage collection process. |
37076
ec5579aad1bb
Fix the wording in the last change.
Eli Zaretskii <eliz@gnu.org>
parents:
37015
diff
changeset
|
478 Whenever the garbage collector marks a Lisp object, it records the |
ec5579aad1bb
Fix the wording in the last change.
Eli Zaretskii <eliz@gnu.org>
parents:
37015
diff
changeset
|
479 pointer to that object in the `last_marked' array. The variable |
37015
f8dd0e40dc34
Make it clear that last_marked[] holds pointers to Lisp objects, not
Eli Zaretskii <eliz@gnu.org>
parents:
36962
diff
changeset
|
480 `last_marked_index' holds the index into the `last_marked' array one |
f8dd0e40dc34
Make it clear that last_marked[] holds pointers to Lisp objects, not
Eli Zaretskii <eliz@gnu.org>
parents:
36962
diff
changeset
|
481 place beyond where the pointer to the very last marked object is |
f8dd0e40dc34
Make it clear that last_marked[] holds pointers to Lisp objects, not
Eli Zaretskii <eliz@gnu.org>
parents:
36962
diff
changeset
|
482 stored. |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
483 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
484 The single most important goal in debugging GC problems is to find the |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
485 Lisp data structure that got corrupted. This is not easy since GC |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
486 changes the tag bits and relocates strings which make it hard to look |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
487 at Lisp objects with commands such as `pr'. It is sometimes necessary |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
488 to convert Lisp_Object variables into pointers to C struct's manually. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
489 Use the `last_marked' array and the source to reconstruct the sequence |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
490 that objects were marked. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
491 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
492 Once you discover the corrupted Lisp object or data structure, it is |
35861 | 493 useful to look at it in a fresh Emacs session and compare its contents |
494 with a session that you are debugging. | |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
495 |
37481 | 496 ** Debugging problems with non-ASCII characters |
497 | |
498 If you experience problems which seem to be related to non-ASCII | |
499 characters, such as \201 characters appearing in the buffer or in your | |
500 files, set the variable byte-debug-flag to t. This causes Emacs to do | |
501 some extra checks, such as look for broken relations between byte and | |
502 character positions in buffers and strings; the resulting diagnostics | |
503 might pinpoint the cause of the problem. | |
504 | |
40247
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
505 ** Debugging the TTY (non-windowed) version |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
506 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
507 The most convenient method of debugging the character-terminal display |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
508 is to do that on a window system such as X. Begin by starting an |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
509 xterm window, then type these commands inside that window: |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
510 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
511 $ tty |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
512 $ echo $TERM |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
513 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
514 Let's say these commands print "/dev/ttyp4" and "xterm", respectively. |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
515 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
516 Now start Emacs (the normal, windowed-display session, i.e. without |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
517 the `-nw' option), and invoke "M-x gdb RET emacs RET" from there. Now |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
518 type these commands at GDB's prompt: |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
519 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
520 (gdb) set args -nw -t /dev/ttyp4 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
521 (gdb) set environment TERM xterm |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
522 (gdb) run |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
523 |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
524 The debugged Emacs should now start in no-window mode with its display |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
525 directed to the xterm window you opened above. |
c824be0e27e2
Add information about debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
37586
diff
changeset
|
526 |
40348
380d8f312f3a
Mention that screen(1) can come in handy for debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
40247
diff
changeset
|
527 Similar arrangement is possible on a character terminal by using the |
380d8f312f3a
Mention that screen(1) can come in handy for debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
40247
diff
changeset
|
528 `screen' package. |
380d8f312f3a
Mention that screen(1) can come in handy for debugging the tty version.
Eli Zaretskii <eliz@gnu.org>
parents:
40247
diff
changeset
|
529 |
37586
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
530 ** Running Emacs built with malloc debugging packages |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
531 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
532 If Emacs exhibits bugs that seem to be related to use of memory |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
533 allocated off the heap, it might be useful to link Emacs with a |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
534 special debugging library, such as Electric Fence (a.k.a. efence) or |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
535 GNU Checker, which helps find such problems. |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
536 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
537 Emacs compiled with such packages might not run without some hacking, |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
538 because Emacs replaces the system's memory allocation functions with |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
539 its own versions, and because the dumping process might be |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
540 incompatible with the way these packages use to track allocated |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
541 memory. Here are some of the changes you might find necessary |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
542 (SYSTEM-NAME and MACHINE-NAME are the names of your OS- and |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
543 CPU-specific headers in the subdirectories of `src'): |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
544 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
545 - In src/s/SYSTEM-NAME.h add "#define SYSTEM_MALLOC". |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
546 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
547 - In src/m/MACHINE-NAME.h add "#define CANNOT_DUMP" and |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
548 "#define CANNOT_UNEXEC". |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
549 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
550 - Configure with a different --prefix= option. If you use GCC, |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
551 version 2.7.2 is preferred, as some malloc debugging packages |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
552 work a lot better with it than with 2.95 or later versions. |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
553 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
554 - Type "make" then "make -k install". |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
555 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
556 - If required, invoke the package-specific command to prepare |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
557 src/temacs for execution. |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
558 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
559 - cd ..; src/temacs |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
560 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
561 (Note that this runs `temacs' instead of the usual `emacs' executable. |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
562 This avoids problems with dumping Emacs mentioned above.) |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
563 |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
564 Some malloc debugging libraries might print lots of false alarms for |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
565 bitfields used by Emacs in some data structures. If you want to get |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
566 rid of the false alarms, you will have to hack the definitions of |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
567 these data structures on the respective headers to remove the `:N' |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
568 bitfield definitions (which will cause each such field to use a full |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
569 int). |
c4354368031e
Add hints for running Emacs with malloc debuggers.
Eli Zaretskii <eliz@gnu.org>
parents:
37565
diff
changeset
|
570 |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
571 ** Some suggestions for debugging on MS Windows: |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
572 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
573 (written by Marc Fleischeuers, Geoff Voelker and Andrew Innes) |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
574 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
575 To debug Emacs with Microsoft Visual C++, you either start emacs from |
37333
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
576 the debugger or attach the debugger to a running emacs process. |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
577 |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
578 To start emacs from the debugger, you can use the file bin/debug.bat. |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
579 The Microsoft Developer studio will start and under Project, Settings, |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
580 Debug, General you can set the command-line arguments and Emacs's |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
581 startup directory. Set breakpoints (Edit, Breakpoints) at Fsignal and |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
582 other functions that you want to examine. Run the program (Build, |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
583 Start debug). Emacs will start and the debugger will take control as |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
584 soon as a breakpoint is hit. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
585 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
586 You can also attach the debugger to an already running Emacs process. |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
587 To do this, start up the Microsoft Developer studio and select Build, |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
588 Start debug, Attach to process. Choose the Emacs process from the |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
589 list. Send a break to the running process (Debug, Break) and you will |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
590 find that execution is halted somewhere in user32.dll. Open the stack |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
591 trace window and go up the stack to w32_msg_pump. Now you can set |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
592 breakpoints in Emacs (Edit, Breakpoints). Continue the running Emacs |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
593 process (Debug, Step out) and control will return to Emacs, until a |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
594 breakpoint is hit. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
595 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
596 To examine the contents of a Lisp variable, you can use the function |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
597 'debug_print'. Right-click on a variable, select QuickWatch (it has |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
598 an eyeglass symbol on its button in the toolbar), and in the text |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
599 field at the top of the window, place 'debug_print(' and ')' around |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
600 the expression. Press 'Recalculate' and the output is sent to stderr, |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
601 and to the debugger via the OutputDebugString routine. The output |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
602 sent to stderr should be displayed in the console window that was |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
603 opened when the emacs.exe executable was started. The output sent to |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
604 the debugger should be displayed in the 'Debug' pane in the Output |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
605 window. If Emacs was started from the debugger, a console window was |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
606 opened at Emacs' startup; this console window also shows the output of |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
607 'debug_print'. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
608 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
609 For example, start and run Emacs in the debugger until it is waiting |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
610 for user input. Then click on the `Break' button in the debugger to |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
611 halt execution. Emacs should halt in `ZwUserGetMessage' waiting for |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
612 an input event. Use the `Call Stack' window to select the procedure |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
613 `w32_msp_pump' up the call stack (see below for why you have to do |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
614 this). Open the QuickWatch window and enter |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
615 "debug_print(Vexec_path)". Evaluating this expression will then print |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
616 out the contents of the Lisp variable `exec-path'. |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
617 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
618 If QuickWatch reports that the symbol is unknown, then check the call |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
619 stack in the `Call Stack' window. If the selected frame in the call |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
620 stack is not an Emacs procedure, then the debugger won't recognize |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
621 Emacs symbols. Instead, select a frame that is inside an Emacs |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
622 procedure and try using `debug_print' again. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
623 |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
624 If QuickWatch invokes debug_print but nothing happens, then check the |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
625 thread that is selected in the debugger. If the selected thread is |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
626 not the last thread to run (the "current" thread), then it cannot be |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
627 used to execute debug_print. Use the Debug menu to select the current |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
628 thread and try using debug_print again. Note that the debugger halts |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
629 execution (e.g., due to a breakpoint) in the context of the current |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
630 thread, so this should only be a problem if you've explicitly switched |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
631 threads. |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
632 |
35791
7c5f4564ff27
Changes, clean-ups, and typo fixes from Richard Stallman.
Eli Zaretskii <eliz@gnu.org>
parents:
35720
diff
changeset
|
633 It is also possible to keep appropriately masked and typecast Lisp |
35655
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
634 symbols in the Watch window, this is more convenient when steeping |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
635 though the code. For instance, on entering apply_lambda, you can |
c3ac662ac2a3
Expand and update, based on the instructions to
Eli Zaretskii <eliz@gnu.org>
parents:
34594
diff
changeset
|
636 watch (struct Lisp_Symbol *) (0xfffffff & args[0]). |
37333
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
637 |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
638 Optimizations often confuse the MS debugger. For example, the |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
639 debugger will sometimes report wrong line numbers, e.g., when it |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
640 prints the backtrace for a crash. It is usually best to look at the |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
641 disassembly to determine exactly what code is being run--the |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
642 disassembly will probably show several source lines followed by a |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
643 block of assembler for those lines. The actual point where Emacs |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
644 crashes will be one of those source lines, but not neccesarily the one |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
645 that the debugger reports. |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
646 |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
647 Another problematic area with the MS debugger is with variables that |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
648 are stored in registers: it will sometimes display wrong values for |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
649 those variables. Usually you will not be able to see any value for a |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
650 register variable, but if it is only being stored in a register |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
651 temporarily, you will see an old value for it. Again, you need to |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
652 look at the disassembly to determine which registers are being used, |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
653 and look at those registers directly, to see the actual current values |
54ec1bffae34
Document problems with MS debugger working on optimized code.
Eli Zaretskii <eliz@gnu.org>
parents:
37157
diff
changeset
|
654 of these variables. |
52401 | 655 |
656 ;;; arch-tag: fbf32980-e35d-481f-8e4c-a2eca2586e6b |