annotate lisp/makefile.w32-in @ 73078:4bf12abbb384

2006-09-23 Ken Manheimer <[e-mail]> * icomplete.el (icomplete-with-completion-tables): List of specialized completion tables with which icomplete should operate. Include the new `internal-complete-buffer', so icomplete works with interactive buffer-selection. (icomplete-simple-completing-p): Add acceptance of specialized completion tables listed in icomplete-with-completion-tables.

#  -*- Makefile -*- for GNU Emacs on the Microsoft W32 API.
#  Copyright (C) 2000, 2001, 2002, 2003, 2004,
#                2005 Free Software Foundation, Inc.
#
#  This file is part of GNU Emacs.
#
#  GNU Emacs is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2, or (at your option)
#  any later version.
#
#  GNU Emacs is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with GNU Emacs; see the file COPYING.  If not, write to the
#  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
#  Boston, MA 02110-1301, USA.
#

ALL =

all: $(ALL)

SQUOTE='
# '

lisp = $(CURDIR)
srcdir = $(CURDIR)/..

# You can specify a different executable on the make command line,
# e.g. "make EMACS=../src/emacs ...".

EMACS = $(THISDIR)/../bin/emacs.exe

# Command line flags for Emacs.  This must include --multibyte,
# otherwise some files will not compile.

EMACSOPT = -batch --no-init-file --no-site-file --multibyte

# Set EMACSLOADPATH correctly (already defined in environment).
EMACSLOADPATH=$(lisp)

lisptagsfiles1 = $(lisp)/*.el
lisptagsfiles2 = $(lisp)/*/*.el
ETAGS = "../lib-src/$(BLD)/etags"

# Files to compile before others during a bootstrap.  This is done to
# speed up the bootstrap process.  The CC files are compiled first
# because CC mode tweaks the compilation process, and requiring
# cc-mode when it is not compiled doesn't work during the
# bootstrapping.

COMPILE_FIRST = \
	$(lisp)/emacs-lisp/byte-opt.el \
	$(lisp)/emacs-lisp/bytecomp.el \
	$(lisp)/subr.el \
	$(lisp)/progmodes/cc-mode.el \
	$(lisp)/progmodes/cc-vars.el

# The actual Emacs command run in the targets below.
# The quotes around $(EMACS) are here because the user could type
# it with forward slashes and without quotes, which will fail if
# the shell is cmd.exe.

emacs = "$(EMACS)" $(EMACSOPT)

# Common command to find subdirectories

setwins=subdirs=`find $$wd -type d -print`; \
	for file in $$subdirs; do \
	   case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \
		*) wins="$$wins $$file" ;; \
	   esac; \
        done

# Have to define the list of subdirs manually when not using sh.
WINS=\
	calc \
	calendar \
	emacs-lisp \
	emulation \
	erc \
	eshell \
	gnus \
	international \
	language \
	mail \
	mh-e \
	net \
	obsolete \
	play \
	progmodes \
	term \
	textmodes \
	url

doit:

$(lisp)/cus-load.el:
	touch $@
# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
#          this can break with GNU Make 3.81 and later if sh.exe is used.
custom-deps: $(lisp)/cus-load.el doit
	@echo Directories: $(WINS)
	-$(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hook nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS)

finder-data: doit
	@echo Directories: $(WINS)
	$(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS)

$(lisp)/loaddefs.el:
	$(MAKE) $(MFLAGS) loaddefs.el-$(SHELLTYPE)
	cp loaddefs.el-$(SHELLTYPE) $@
	rm loaddefs.el-$(SHELLTYPE)

loaddefs.el-SH:
	echo ";;; loaddefs.el --- automatically extracted autoloads" > $@
	echo ";;" >> $@; echo ";;; Code:" >> $@
	echo "(autoload 'define-minor-mode \"easy-mmode\")" >>$@
	echo "(autoload 'define-ccl-program \"ccl\")" >>$@
	echo "(autoload 'regexp-opt \"regexp-opt\")" >>$@
	echo "(autoload 'string-to-list \"mule-util\")" >>$@
	echo "(autoload 'define-derived-mode \"derived\")" >>$@
	echo "(autoload 'encoded-kbd-mode \"encoded-kb\")" >>$@
	echo "(defvar cvs-global-menu nil)" >>$@
	echo "" >> $@
	echo ";;; Local Variables:" >> $@
	echo ";;; version-control: never" >> $@
	echo ";;; no-byte-compile: t" >> $@
	echo ";;; no-update-autoloads: t" >> $@
	echo ";;; End:" >> $@
	echo ";;; loaddefs.el ends here" >> $@

loaddefs.el-CMD:
	echo ;;; loaddefs.el --- automatically extracted autoloads> $@
	echo ;;; Code:>> $@
	echo (autoload 'define-minor-mode "easy-mmode")>> $@
	echo (autoload 'define-ccl-program "ccl")>> $@
	echo (autoload 'regexp-opt "regexp-opt")>> $@
	echo (autoload 'string-to-list "mule-util")>> $@
	echo (autoload 'define-derived-mode "derived")>> $@
	echo (autoload 'encoded-kbd-mode "encoded-kb")>> $@
	echo (defvar cvs-global-menu nil)>> $@
	echo.>> $@
	echo ;;; Local Variables:>> $@
	echo ;;; version-control: never>> $@
	echo ;;; no-byte-compile: t>> $@
	echo ;;; no-update-autoloads: t>> $@
	echo ;;; End:>> $@
	echo ;;; loaddefs.el ends here>> $@

# Use . instead of $(lisp) because $(lisp) is an absolute file name,
# including a drive letter and any leading directories, so the generated
# loaddefs.el will mention file names that on other machine reference
# possibly non-existent directories.
#
# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
#          this can break with GNU Make 3.81 and later if sh.exe is used.
autoloads: $(lisp)/loaddefs.el doit
	@echo Directories: . $(WINS)
	$(emacs) -l autoload \
		--eval $(ARGQUOTE)(setq find-file-hook nil find-file-suppress-same-file-warnings t)$(ARGQUOTE) \
		-f w32-batch-update-autoloads "$(lisp)/loaddefs.el" . $(WINS)

$(lisp)/subdirs.el:
	$(MAKE) $(MFLAGS) update-subdirs

# Need separate version for sh and native cmd.exe
update-subdirs: update-subdirs-$(SHELLTYPE)

update-subdirs-CMD: doit
	echo ;; -*- no-byte-compile: t -*-> $(lisp)/subdirs.el
	echo ;; In load-path, after this directory should come>> $(lisp)/subdirs.el
	echo ;; certain of its subdirectories.  Here we specify them.>> $(lisp)/subdirs.el
	echo (normal-top-level-add-to-load-path $(SQUOTE)(>> $(lisp)/subdirs.el
	@for %%d in ($(WINS)) do if not (%%d)==(term) echo "%%d">> $(lisp)/subdirs.el
	echo ))>> $(lisp)/subdirs.el

update-subdirs-SH: doit
	$(srcdir)/update-subdirs $(lisp); \
	for file in $(WINS); do \
	   $(srcdir)/update-subdirs $$file; \
	done;

updates: update-subdirs autoloads mh-autoloads finder-data custom-deps

# This is useful after "cvs up".
cvs-update: recompile autoloads finder-data custom-deps

# Update the AUTHORS file.

update-authors:
	$(emacs) -l authors -f batch-update-authors $(srcdir)/AUTHORS $(srcdir)

TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
	$(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2)

TAGS-LISP: $(lisptagsfiles1) $(lisptagsfiles2)
	$(ETAGS) -o TAGS-LISP $(lisptagsfiles1) $(lisptagsfiles2)

.SUFFIXES: .elc .el

.el.elc:
	-$(emacs) -f batch-byte-compile $<

# Compile all Lisp files, but don't recompile those that are up to
# date.  Some files don't actually get compiled because they set the
# local variable no-byte-compile.

# All .elc files are made writable before compilation in case we
# checked out read-only (CVS option -r).  Files MUST be compiled one by
# one.  If we compile several files in a row we can't make sure that
# the compilation environment is clean.  We also set the load-path of
# the Emacs used for compilation to the current directory and its
# subdirectories, to make sure require's and load's in the files being
# compiled find the right files.

# Need separate version for sh and native cmd.exe
compile: $(lisp)/subdirs.el mh-autoloads compile-$(SHELLTYPE) doit

compile-CMD:
#	-for %%f in ($(lisp) $(WINS)) do for %%g in (%%f\*.elc) do @attrib -r %%g
	for %%f in ($(COMPILE_FIRST)) do \
	  $(emacs) -l loaddefs -f batch-byte-compile-if-not-done %%f
	for %%f in (. $(WINS)) do for %%g in (%%f/*.el) do \
	  $(emacs) -l loaddefs -f batch-byte-compile-if-not-done %%f/%%g

compile-SH:
#	for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
	for el in $(COMPILE_FIRST); do \
	  echo Compiling $$el; \
	  $(emacs) -l loaddefs -f batch-byte-compile-if-not-done $$el; \
	done
	for dir in $(lisp) $(WINS); do \
	  for el in $$dir/*.el; do \
	    if test -f $$el; \
	    then \
	      echo Compiling $$el; \
	      $(emacs) -l loaddefs -f batch-byte-compile-if-not-done $$el; \
	    fi \
	  done; \
	done

# Compile all Lisp files.  This is like `compile' but compiles files
# unconditionally.  Some files don't actually get compiled because they
# set the local variable no-byte-compile.

compile-always: $(lisp)/subdirs.el compile-always-$(SHELLTYPE) doit

compile-always-CMD:
#	-for %%f in ($(lisp) $(WINS)) do for %%g in (%%f\*.elc) do @attrib -r %%g
	for %%f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %%f
	for %%f in (. $(WINS)) do for %%g in (%%f/*.el) do $(emacs) -f batch-byte-compile %%f/%%g

compile-always-SH:
#	for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done
	for el in $(COMPILE_FIRST); do \
	  echo Compiling $$el; \
	  $(emacs) -f batch-byte-compile $$el || exit 1; \
	done
	for dir in $(lisp) $(WINS); do \
	  for el in $$dir/*.el; do \
	    echo Compiling $$el; \
	    $(emacs) -f batch-byte-compile $$el || exit 1; \
	  done; \
	done

compile-calc: compile-calc-$(SHELLTYPE)

compile-calc-CMD:
	for %%f in ($(lisp)/calc/*.el) do $(emacs) -f batch-byte-compile %%f

compile-calc-SH:
	for el in $(lisp)/calc/*.el; do \
	  echo Compiling $$el; \
	  $(emacs) -f batch-byte-compile $$el || exit 1; \
	done

# Backup compiled Lisp files in elc.tar.gz.  If that file already
# exists, make a backup of it.

backup-compiled-files:
	-mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
	-tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc

# Compile Lisp files, but save old compiled files first.

compile-after-backup: backup-compiled-files compile-always

# Recompile all Lisp files which are newer than their .elc files.
# Note that this doesn't create .elc files.  It only recompiles if an
# .elc is present.
# WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as
#          this can break with GNU Make 3.81 and later if sh.exe is used.
recompile: mh-autoloads doit $(lisp)/progmodes/cc-mode.elc
	$(emacs) --eval $(ARGQUOTE)(batch-byte-recompile-directory 0)$(ARGQUOTE) $(lisp)

# Update MH-E internal autoloads. These are not to be confused with
# the autoloads for the MH-E entry points, which are already in
# loaddefs.el.
MH_E_SRC = $(lisp)/mh-e/mh-acros.el $(lisp)/mh-e/mh-alias.el	\
	$(lisp)/mh-e/mh-buffers.el $(lisp)/mh-e/mh-compat.el	\
	$(lisp)/mh-e/mh-comp.el $(lisp)/mh-e/mh-e.el		\
	$(lisp)/mh-e/mh-folder.el $(lisp)/mh-e/mh-funcs.el	\
	$(lisp)/mh-e/mh-gnus.el $(lisp)/mh-e/mh-identity.el	\
	$(lisp)/mh-e/mh-inc.el $(lisp)/mh-e/mh-junk.el		\
	$(lisp)/mh-e/mh-letter.el $(lisp)/mh-e/mh-limit.el	\
	$(lisp)/mh-e/mh-mime.el $(lisp)/mh-e/mh-print.el	\
	$(lisp)/mh-e/mh-scan.el $(lisp)/mh-e/mh-search.el	\
	$(lisp)/mh-e/mh-seq.el $(lisp)/mh-e/mh-show.el		\
	$(lisp)/mh-e/mh-speed.el $(lisp)/mh-e/mh-thread.el	\
	$(lisp)/mh-e/mh-tool-bar.el $(lisp)/mh-e/mh-utils.el	\
	$(lisp)/mh-e/mh-xface.el

mh-autoloads: $(lisp)/mh-e/mh-loaddefs.el
$(lisp)/mh-e/mh-loaddefs.el: $(MH_E_SRC)
	$(MAKE) $(MFLAGS) pre-mh-loaddefs.el-$(SHELLTYPE)
	cp pre-mh-loaddefs.el-$(SHELLTYPE) $@
	rm pre-mh-loaddefs.el-$(SHELLTYPE)
	"$(EMACS)" $(EMACSOPT) \
	   -l autoload \
	   --eval "(setq generate-autoload-cookie \";;;###mh-autoload\")" \
	   --eval "(setq find-file-suppress-same-file-warnings t)" \
	   --eval "(setq make-backup-files nil)" \
	   -f w32-batch-update-autoloads \
	   "$(lisp)/mh-e/mh-loaddefs.el" $(lisp)/mh-e

pre-mh-loaddefs.el-SH:
	echo ";;; mh-loaddefs.el --- automatically extracted autoloads" > $@
	echo ";;" >> $@
	echo ";; Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc." >> $@
	echo ";; Author: Bill Wohler <[e-mail]>" >> $@
	echo ";; Keywords: mail" >> $@
	echo ";;; Commentary:" >> $@
	echo ";;; Change Log:" >> $@
	echo ";;; Code:" >> $@
	echo "" >> $@
	echo "(provide 'mh-loaddefs)" >> $@
	echo ";; Local Variables:" >> $@
	echo ";; version-control: never" >> $@
	echo ";; no-byte-compile: t" >> $@
	echo ";; no-update-autoloads: t" >> $@
	echo ";; End:" >> $@
	echo ";;; mh-loaddefs.el ends here" >> $@

pre-mh-loaddefs.el-CMD:
	echo ;;; mh-loaddefs.el --- automatically extracted autoloads> $@
	echo ;;>> $@
	echo ;; Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.>> $@
	echo ;; Author: Bill Wohler ([e-mail])>> $@
	echo ;; Keywords: mail>> $@
	echo ;;; Commentary:>> $@
	echo ;;; Change Log:>> $@
	echo ;;; Code:>> $@
	echo.>> $@
	echo (provide 'mh-loaddefs)>> $@
	echo ;; Local Variables:>> $@
	echo ;; version-control: never>> $@
	echo ;; no-byte-compile: t>> $@
	echo ;; no-update-autoloads: t>> $@
	echo ;; End:>> $@
	echo ;;; mh-loaddefs.el ends here>> $@

# Prepare a bootstrap in the lisp subdirectory.
#
# Build loaddefs.el to make sure it's up-to-date.  If it's not, that
# might lead to errors during the bootstrap because something fails to
# autoload as expected.  If there is no emacs binary, then we can't
# build autoloads yet.  In that case we have to use ldefs-boot.el;
# bootstrap should always work with ldefs-boot.el.  (Because
# loaddefs.el is an automatically generated file, we don't want to
# store it in the source repository).
#
# Remove compiled Lisp files so that bootstrap-emacs will be built from
# sources only.

# Need separate version for sh and native cmd.exe
bootstrap-clean: bootstrap-clean-$(SHELLTYPE) $(lisp)/loaddefs.el

bootstrap-clean-CMD:
#	if exist "$(EMACS)" $(MAKE) $(MFLAGS) autoloads
	cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el
	-for %%f in (. $(WINS)) do for %%g in (%%f\*.elc) do @$(DEL) %%g

bootstrap-clean-SH:
#	if test -f "$(EMACS)"; then $(MAKE) $(MFLAGS) autoloads; fi
#	-rm -f $(lisp)/*.elc $(lisp)/*/*.elc
	cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el
	-for dir in . $(WINS); do rm -f $$dir/*.elc; done

# Generate/update files for the bootstrap process.
# When done, remove bootstrap-emacs from ../bin, so that
# it will not be mistaken for an installed binary.

bootstrap: update-subdirs autoloads mh-autoloads compile finder-data custom-deps
	- $(DEL) "$(EMACS)"

#
# Assuming INSTALL_DIR is defined, copy the elisp files to it
# Windows 95 makes this harder than it should be.
#
install:
		- mkdir "$(INSTALL_DIR)/lisp"
		- $(DEL) ../same-dir.tst
		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"
		echo SameDirTest > "$(INSTALL_DIR)/same-dir.tst"
#ifdef COPY_LISP_SOURCE
		$(IFNOTSAMEDIR) $(CP_DIR) . "$(INSTALL_DIR)/lisp" $(ENDIF)
#else
#		$(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
#		$(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF)
#endif
		- $(DEL) ../same-dir.tst
		- $(DEL) "$(INSTALL_DIR)/same-dir.tst"

#
# Maintenance
#
clean:
		- $(DEL) *~