Mercurial > emacs
annotate etc/NEWS @ 31967:54b09b09e4bd
(map-y-or-n-p): Fix missing backquotes.
author | Stefan Monnier <monnier@iro.umontreal.ca> |
---|---|
date | Fri, 29 Sep 2000 01:00:18 +0000 |
parents | 3d17044d63a9 |
children | 9166041bd1e1 |
rev | line source |
---|---|
31741 | 1 GNU Emacs NEWS -- history of user-visible changes. 2000-09-17 |
31007 | 2 Copyright (C) 1999, 2000 Free Software Foundation, Inc. |
25853 | 3 See the end for copying conditions. |
4 | |
5 Please send Emacs bug reports to bug-gnu-emacs@gnu.org. | |
30922 | 6 For older news, see the file ONEWS |
25853 | 7 |
8 | |
25995 | 9 * Installation Changes in Emacs 21.1 |
10 | |
30576 | 11 ** Support for GNU/Linux on IA64 machines has been added. |
12 | |
31007 | 13 ** Support for LynxOS has been added. |
14 | |
28166 | 15 ** `movemail' defaults to supporting POP. You can turn this off using |
16 the --without-pop configure option, should that be necessary. | |
17 | |
18 ** There are new configure options associated with the support for | |
29962
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
19 images and toolkit scrollbars. Use the --help option in `configure' |
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
20 to list them. |
29696 | 21 |
29972 | 22 ** There is a new configure option `--without-xim' that instructs |
30786 | 23 Emacs to not use X Input Methods (XIM), if these are available. |
30467
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
24 |
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
25 ** There is a new configure option `--disable-largefile' to omit |
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
26 Unix-98-style support for large files if that is available. |
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
27 |
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
28 ** You can build a 64-bit Emacs for SPARC/Solaris systems which |
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
29 support 64-bit executables. See etc/MACHINES for instructions. |
30576 | 30 |
28166 | 31 |
32 * Changes in Emacs 21.1 | |
33 | |
31924
e218cb644b08
Add entry for Info using emacs header-lines.
Miles Bader <miles@gnu.org>
parents:
31894
diff
changeset
|
34 ** The header line in an Info buffer is now displayed as an emacs header-line |
e218cb644b08
Add entry for Info using emacs header-lines.
Miles Bader <miles@gnu.org>
parents:
31894
diff
changeset
|
35 (which is like a mode-line, but at the top of the window), so that it |
e218cb644b08
Add entry for Info using emacs header-lines.
Miles Bader <miles@gnu.org>
parents:
31894
diff
changeset
|
36 remains visible even when the buffer has been scrolled. This behavior |
e218cb644b08
Add entry for Info using emacs header-lines.
Miles Bader <miles@gnu.org>
parents:
31894
diff
changeset
|
37 may be disabled by customizing the option `Info-use-header-line'. |
e218cb644b08
Add entry for Info using emacs header-lines.
Miles Bader <miles@gnu.org>
parents:
31894
diff
changeset
|
38 |
31894 | 39 ** `gnus-user-agent' is a new possibility for `mail-user-agent'. It |
40 is like `message-user-agent', but with all the Gnus paraphernalia. | |
41 | |
42 +++ | |
43 ** The recommended way of using Iswitchb is via the new global minor | |
44 mode `iswitchb-mode'. | |
45 | |
31742 | 46 ** Gnus changes. |
47 | |
48 The Gnus NEWS entries are short, but they reflect sweeping changes in | |
49 four areas: Article display treatment, MIME treatment, | |
50 internationalization and mail-fetching. | |
51 | |
52 *** The mail-fetching functions have changed. See the manual for the | |
53 many details. In particular, all procmail fetching variables are gone. | |
54 | |
55 If you used procmail like in | |
56 | |
57 (setq nnmail-use-procmail t) | |
58 (setq nnmail-spool-file 'procmail) | |
59 (setq nnmail-procmail-directory "~/mail/incoming/") | |
60 (setq nnmail-procmail-suffix "\\.in") | |
61 | |
31858
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
62 this now has changed to |
31742 | 63 |
64 (setq mail-sources | |
65 '((directory :path "~/mail/incoming/" | |
66 :suffix ".in"))) | |
67 | |
68 More information is available in the info doc at Select Methods -> | |
69 Getting Mail -> Mail Sources | |
70 | |
71 *** Gnus is now a MIME-capable reader. This affects many parts of | |
72 Gnus, and adds a slew of new commands. See the manual for details. | |
73 | |
74 *** Gnus has also been multilingualized. This also affects too | |
75 many parts of Gnus to summarize here, and adds many new variables. | |
76 | |
77 *** gnus-auto-select-first can now be a function to be | |
78 called to position point. | |
79 | |
80 *** The user can now decide which extra headers should be included in | |
81 summary buffers and NOV files. | |
82 | |
83 *** `gnus-article-display-hook' has been removed. Instead, a number | |
84 of variables starting with `gnus-treat-' have been added. | |
85 | |
86 *** The Gnus posting styles have been redone again and now work in a | |
87 subtly different manner. | |
88 | |
89 *** New web-based backends have been added: nnslashdot, nnwarchive | |
90 and nnultimate. nnweb has been revamped, again, to keep up with | |
91 ever-changing layouts. | |
92 | |
93 *** Gnus can now read IMAP mail via nnimap. | |
94 | |
95 *** There is image support. | |
96 | |
97 ** When your terminal can't display characters from some of the ISO | |
31741 | 98 8859 character sets but can display Latin-1, you can display |
99 more-or-less mnemonic sequences of ASCII/Latin-1 characters instead of | |
100 empty boxes (under a window system) or question marks (not under a | |
101 window system). Customize the option `latin1-display' to turn this | |
102 on. | |
103 | |
31728 | 104 ** The new user-option `find-file-suppress-same-file-warnings' can be |
105 set to suppress warnings ``X and Y are the same file'' when visiting a | |
106 file that is already visited under a different name. | |
107 | |
31807 | 108 ** The new user-option `electric-help-shrink-window' can be set to |
109 nil to prevent adjusting the help window size to the buffer size. | |
110 | |
111 ** Emacs now checks for recursive loads of Lisp files. If the | |
112 recursion depth exceeds `recursive-load-depth-limit', an error is | |
113 signaled. | |
114 | |
31728 | 115 ** The Strokes package has been updated. If your Emacs has XPM |
31641 | 116 support, you can use it for pictographic editing. In Strokes mode, |
117 use C-mouse-2 to compose a complex stoke and insert it into the | |
118 buffer. You can encode or decode a strokes buffer with new commands | |
119 M-x strokes-encode-buffer and M-x strokes-decode-buffer. There is a | |
120 new command M-x strokes-list-strokes. | |
121 | |
31248 | 122 +++ |
31728 | 123 ** New command M-x describe-character-set reads a character set name |
31248 | 124 and displayes information about that. |
125 | |
31728 | 126 ** When an error is signaled during the loading of the user's init |
30930 | 127 file, Emacs now pops up the *Messages* buffer. |
128 | |
30871 | 129 ** Polish and German translations of Emacs' reference card have been |
31004 | 130 added. They are named `pl-refcard.tex' and `de-refcard.tex'. |
30871 | 131 Postscript files are included. |
132 | |
133 ** A reference card for Dired has been added. Its name is | |
134 `dired-ref.tex'. | |
135 | |
30693 | 136 ** The new variable `auto-mode-interpreter-regexp' contains a regular |
137 expression matching interpreters, for file mode determination. | |
138 | |
139 This regular expression is matched against the first line of a file to | |
140 determine the file's mode in `set-auto-mode' when Emacs can't deduce a | |
141 mode from the file's name. If it matches, the file is assumed to be | |
142 interpreted by the interpreter matched by the second group of the | |
143 regular expression. The mode is then determined as the mode | |
144 associated with that interpreter in `interpreter-mode-alist'. | |
145 | |
31007 | 146 +++ |
30339
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
147 ** C-down-mouse-3 is bound differently. Now if the menu bar is not |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
148 displayed it pops up a menu containing the items which would be on the |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
149 menu bar. If the menu bar is displayed, it pops up the major mode |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
150 menu or the Edit menu if there is no major mode menu. |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
151 |
30222 | 152 ** Variable `load-path' is no longer customizable because it contains |
153 a version-dependent component. | |
154 | |
30155 | 155 ** The <delete> function key is now bound to `delete-char' by default. |
156 Note that this takes effect only on window systems. On TTYs, Emacs | |
157 will receive ASCII 127 when the DEL key is pressed. This | |
158 character is still bound as before. | |
159 | |
29752 | 160 ** Item Save Options on the Options menu allows saving options set |
161 using that menu. | |
162 | |
29532
9609bc6529ac
executable-make-buffer-file-executable-if-script-p
Dave Love <fx@gnu.org>
parents:
29509
diff
changeset
|
163 ** New function executable-make-buffer-file-executable-if-script-p is |
31007 | 164 suitable as an after-save-hook as an alternative to `executable-chmod'. |
29532
9609bc6529ac
executable-make-buffer-file-executable-if-script-p
Dave Love <fx@gnu.org>
parents:
29509
diff
changeset
|
165 |
31022
2fa78512b45e
Mark the operation of chosing safe coding system as explained
Eli Zaretskii <eliz@gnu.org>
parents:
31020
diff
changeset
|
166 +++ |
29509 | 167 ** The most preferred coding-system is now used to save a buffer if |
168 buffer-file-coding-system is `undecided' and it is safe for the buffer | |
169 contents. (The most preferred is set by set-language-environment or | |
170 by M-x prefer-coding-system.) Thus if you visit an ASCII file and | |
171 insert a non-ASCII character from your current language environment, | |
172 the file will be saved silently with the appropriate coding. | |
173 Previously you would be prompted for a safe coding system. | |
174 | |
31020
2f1815d3e9ae
Mark inhibit-iso-escape-detection as updated in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31019
diff
changeset
|
175 +++ |
30296 | 176 ** New variable `inhibit-iso-escape-detection' determines if Emacs' |
177 coding system detection algorithm should pay attention to ISO2022's | |
178 escape sequences. If this variable is non-nil, the algorithm ignores | |
179 such escape sequences. The default value is nil, and it is | |
180 recommended not to change it except for the special case that you | |
30357 | 181 always want to read any escape code verbatim. If you just want to |
30296 | 182 read a specific file without decoding escape codes, use C-x RET c |
30357 | 183 (`universal-coding-system-argument'). For instance, C-x RET c latin-1 |
184 RET C-x C-f filename RET. | |
30205 | 185 |
29506 | 186 ** Variable `default-korean-keyboard' is initialized properly from the |
187 environment variable `HANGUL_KEYBOARD_TYPE'. | |
188 | |
31007 | 189 +++ |
29506 | 190 ** C-u C-x = provides detailed information about the character at |
191 point in a pop-up window. | |
192 | |
31024
147670916de0
Mark list-charset-chars as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31022
diff
changeset
|
193 +++ |
29506 | 194 ** New command M-x list-charset-chars reads a character set name and |
195 displays all characters in that character set. | |
196 | |
197 ** M-x set-terminal-coding-system (C-x RET t) now allows CCL-based | |
198 coding systems such as cpXXX and cyrillic-koi8. | |
199 | |
31026
3cd6db455d11
Mark comment-dwim as described in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31024
diff
changeset
|
200 +++ |
29218
e956cc90f6c0
newcomment and the change of binding for M-;
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
29162
diff
changeset
|
201 ** M-; now calls comment-dwim which tries to do something clever based |
31026
3cd6db455d11
Mark comment-dwim as described in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31024
diff
changeset
|
202 on the context. M-x kill-comment is now an alias to comment-kill, |
3cd6db455d11
Mark comment-dwim as described in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31024
diff
changeset
|
203 defined on newcomment.el. |
29218
e956cc90f6c0
newcomment and the change of binding for M-;
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
29162
diff
changeset
|
204 |
31007 | 205 +++ |
28919 | 206 ** The function `getenv' is now callable interactively. |
207 | |
28912 | 208 ** The many obsolete language `setup-...-environment' commands have |
209 been removed -- use `set-language-environment'. | |
210 | |
31007 | 211 +++ |
28799 | 212 ** New user options `display-time-mail-face' and |
213 `display-time-use-mail-icon' control the appearance of mode-line mail | |
214 indicator used by the display-time package. On a suitable display the | |
215 indicator can be an icon and is mouse-sensitive. | |
216 | |
31007 | 217 +++ |
28699 | 218 ** Emacs' auto-save list files are now by default stored in a |
219 sub-directory `.emacs.d/auto-save-list/' of the user's home directory. | |
28776
49a91eb4274c
Describe the different auto-save-file-list-prefix on MS-DOS.
Eli Zaretskii <eliz@gnu.org>
parents:
28759
diff
changeset
|
220 (On MS-DOS, this subdirectory's name is `_emacs.d/auto-save.list/'.) |
28699 | 221 You can customize `auto-save-list-prefix' to change this location. |
222 | |
31007 | 223 +++ |
28695 | 224 ** On window-systems, additional space can be put between text lines |
225 on the display using several methods | |
226 | |
31007 | 227 +++ |
28695 | 228 - By setting frame parameter `line-spacing' to PIXELS. PIXELS must be |
229 a positive integer, and specifies that PIXELS number of pixels should | |
230 be put below text lines on the affected frame or frames. | |
231 | |
31007 | 232 +++ |
28695 | 233 - By setting X resource `lineSpacing', class `LineSpacing'. This is |
234 equivalent ot specifying the frame parameter. | |
235 | |
28870 | 236 - By specifying `--line-spacing=N' or `-lsp N' on the command line. |
28695 | 237 |
238 - By setting buffer-local variable `line-spacing'. The meaning is | |
239 the same, but applies to the a particular buffer only. | |
240 | |
31007 | 241 +++ |
29752 | 242 ** The new command `clone-indirect-buffer' can be used to create |
28660 | 243 an indirect buffer that is a twin copy of the current buffer. The |
29752 | 244 command `clone-indirect-buffer-other-window', bound to C-x 4 c, |
28660 | 245 does the same but displays the indirect buffer in another window. |
28626 | 246 |
31007 | 247 +++ |
28525
05658544eaff
backup-directory-alist, make-backup-file-name-function.
Dave Love <fx@gnu.org>
parents:
28506
diff
changeset
|
248 ** New user options `backup-directory-alist' and |
28757 | 249 `make-backup-file-name-function' control the placement of backups, |
250 typically in a single directory or in an invisible sub-directory. | |
28525
05658544eaff
backup-directory-alist, make-backup-file-name-function.
Dave Love <fx@gnu.org>
parents:
28506
diff
changeset
|
251 |
28396 | 252 ** New commands iso-iso2sgml and iso-sgml2iso convert between Latin-1 |
253 characters and the corresponding SGML (HTML) entities. | |
254 | |
31028
b72824a73f3c
Mark load-dangerous-libraries as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31026
diff
changeset
|
255 +++ |
28159 | 256 ** Emacs now refuses to load compiled Lisp files which weren't |
257 compiled with Emacs. Set `load-dangerous-libraries' to t to change | |
258 this behavior. | |
259 | |
260 The reason for this change is an incompatible change in XEmacs' byte | |
261 compiler. Files compiled with XEmacs can contain byte codes that let | |
262 Emacs dump core. | |
263 | |
31007 | 264 +++ |
28159 | 265 ** New X resources recognized |
27994 | 266 |
28140 | 267 *** The X resource `synchronous', class `Synchronous', specifies |
268 whether Emacs should run in synchronous mode. Synchronous mode | |
269 is useful for debugging X problems. | |
270 | |
271 Example: | |
272 | |
28159 | 273 emacs.synchronous: true |
28140 | 274 |
27994 | 275 *** The X resource `visualClass, class `VisualClass', specifies the |
276 visual Emacs should use. The resource's value should be a string of | |
27995 | 277 the form `CLASS-DEPTH', where CLASS is the name of the visual class, |
278 and DEPTH is the requested color depth as a decimal number. Valid | |
279 visual class names are | |
27994 | 280 |
281 TrueColor | |
282 PseudoColor | |
283 DirectColor | |
284 StaticColor | |
285 GrayScale | |
286 StaticGray | |
287 | |
288 Visual class names specified as X resource are case-insensitive, i.e. | |
289 `pseudocolor', `Pseudocolor' and `PseudoColor' all have the same | |
290 meaning. | |
291 | |
27995 | 292 The program `xdpyinfo' can be used to list the visual classes |
293 supported on your display, and which depths they have. If | |
294 `visualClass' is not specified, Emacs uses the display's default | |
295 visual. | |
296 | |
297 Example: | |
298 | |
28159 | 299 emacs.visualClass: TrueColor-8 |
27994 | 300 |
301 *** The X resource `privateColormap', class `PrivateColormap', | |
302 specifies that Emacs should use a private colormap if it is using the | |
303 default visual, and that visual is of class PseudoColor. Recognized | |
304 resource values are `true' or `on'. | |
305 | |
27995 | 306 Example: |
307 | |
28159 | 308 emacs.privateColormap: true |
27995 | 309 |
27966
b8b910003631
Mention the new menu-bar structure.
Eli Zaretskii <eliz@gnu.org>
parents:
27881
diff
changeset
|
310 ** The menu bar configuration has changed. The new configuration is |
b8b910003631
Mention the new menu-bar structure.
Eli Zaretskii <eliz@gnu.org>
parents:
27881
diff
changeset
|
311 more CUA-compliant. The most significant change is that Options is |
b8b910003631
Mention the new menu-bar structure.
Eli Zaretskii <eliz@gnu.org>
parents:
27881
diff
changeset
|
312 now a separate menu-bar item, with Mule and Customize as its submenus. |
b8b910003631
Mention the new menu-bar structure.
Eli Zaretskii <eliz@gnu.org>
parents:
27881
diff
changeset
|
313 |
27847 | 314 ** User-option `show-cursor-in-non-selected-windows' controls how to |
27845 | 315 display the cursor in non-selected windows. If nil, no cursor is |
27847 | 316 shown, if non-nil a hollow box cursor is shown. This option can |
317 be customized. | |
27845 | 318 |
31007 | 319 +++ |
27770 | 320 ** The variable `echo-keystrokes' may now have a floating point value. |
321 | |
31007 | 322 +++ |
27473 | 323 ** C-x 5 1 runs the new command delete-other-frames which deletes |
324 all frames except the selected one. | |
325 | |
27369 | 326 ** If your init file is compiled (.emacs.elc), `user-init-file' is set |
327 to the source name (.emacs.el), if that exists, after loading it. | |
328 | |
27356 | 329 ** The help string specified for a menu-item whose definition contains |
30482
d9af2c1682d5
Help strings are supported on MS-Windows and MS-DOS as well.
Eli Zaretskii <eliz@gnu.org>
parents:
30477
diff
changeset
|
330 the property `:help HELP' is now displayed under X, on MS-Windows, and |
d9af2c1682d5
Help strings are supported on MS-Windows and MS-DOS as well.
Eli Zaretskii <eliz@gnu.org>
parents:
30477
diff
changeset
|
331 MS-DOS, either in the echo area or with tooltips. Many standard menus |
d9af2c1682d5
Help strings are supported on MS-Windows and MS-DOS as well.
Eli Zaretskii <eliz@gnu.org>
parents:
30477
diff
changeset
|
332 displayed by Emacs now have help strings. |
d9af2c1682d5
Help strings are supported on MS-Windows and MS-DOS as well.
Eli Zaretskii <eliz@gnu.org>
parents:
30477
diff
changeset
|
333 |
31058
8a6816ab9887
Mark mouse-highlight on MS-DOS as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31053
diff
changeset
|
334 +++ |
30482
d9af2c1682d5
Help strings are supported on MS-Windows and MS-DOS as well.
Eli Zaretskii <eliz@gnu.org>
parents:
30477
diff
changeset
|
335 ** Highlighting of mouse-sensitive regions is now supported in the |
d9af2c1682d5
Help strings are supported on MS-Windows and MS-DOS as well.
Eli Zaretskii <eliz@gnu.org>
parents:
30477
diff
changeset
|
336 MS-DOS version of Emacs. |
27356 | 337 |
27266
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
338 ** New user option `read-mail-command' specifies a command to use to |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
339 read mail from the menu etc. |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
340 |
31030
5f19633e9dc2
Mark hexl-insert-hex-string as documented.
Eli Zaretskii <eliz@gnu.org>
parents:
31028
diff
changeset
|
341 +++ |
28658 | 342 ** Hexl contains a new command `hexl-insert-hex-string' which inserts |
343 a string of hexadecimal numbers read from the mini-buffer. | |
344 | |
28626 | 345 ** Changes in Texinfo mode. |
346 | |
347 ** A couple of new key bindings have been added for inserting Texinfo | |
348 macros | |
349 | |
350 Key binding Macro | |
351 ------------------------- | |
352 C-c C-c C-s @strong | |
353 C-c C-c C-e @emph | |
354 C-c C-c u @url | |
355 C-c C-c q @quotation | |
356 C-c C-c m @email | |
357 | |
27266
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
358 ** Changes in Outline mode. |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
359 |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
360 There is now support for Imenu to index headings. A new command |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
361 `outline-headers-as-kill' copies the visible headings in the region to |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
362 the kill ring, e.g. to produce a table of contents. |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
363 |
31858
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
364 ** Changes to Emacs Server |
31009 | 365 |
31032
16697e53a439
Mark server-kill-new-buffers as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31030
diff
changeset
|
366 +++ |
16697e53a439
Mark server-kill-new-buffers as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31030
diff
changeset
|
367 *** The new option `server-kill-new-buffers' specifies what to do |
31009 | 368 with buffers when done with them. If non-nil, the default, buffers |
369 are killed, unless they were already present before visiting them with | |
370 Emacs Server. If nil, `server-temp-file-regexp' specifies which | |
371 buffers to kill, as before. | |
372 | |
373 Please note that only buffers are killed that still have a client, | |
31032
16697e53a439
Mark server-kill-new-buffers as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31030
diff
changeset
|
374 i.e. buffers visited with `emacsclient --no-wait' are never killed in |
31009 | 375 this way. |
376 | |
30788 | 377 ** Changes to Show Paren mode. |
378 | |
379 *** Overlays used by Show Paren mode now use a priority property. | |
380 The new user option show-paren-priority specifies the priority to | |
381 use. Default is 1000. | |
382 | |
31034
6e746a746c96
Mark check-parens as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31032
diff
changeset
|
383 +++ |
27200 | 384 ** New command M-x check-parens can be used to find unbalanced paren |
385 groups and strings in buffers in Lisp mode (or other modes). | |
386 | |
31007 | 387 +++ |
388 ** You can now easily create new *Info* buffers using either | |
389 M-x clone-buffer, C-u m <entry> RET or C-u g <entry> RET. | |
390 M-x clone-buffer can also be used on *Help* and several other special | |
391 buffers. | |
392 | |
393 +++ | |
26432
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
394 ** Emacs can now support 'wheeled' mice (such as the MS IntelliMouse) |
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
395 under XFree86. To enable this, simply put (mwheel-install) in your |
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
396 .emacs file. |
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
397 |
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
398 The variables `mwheel-follow-mouse' and `mwheel-scroll-amount' |
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
399 determine where and by how much buffers are scrolled. |
23b09a47da5c
added entry about mwheel.el
William M. Perry <wmperry@aventail.com>
parents:
26417
diff
changeset
|
400 |
26417 | 401 ** Listing buffers with M-x list-buffers (C-x C-b) now shows |
402 abbreviated file names. Abbreviations can be customized by changing | |
403 `directory-abbrev-alist'. | |
404 | |
25853 | 405 ** Faces and frame parameters. |
406 | |
407 There are four new faces `scroll-bar', `border', `cursor' and `mouse'. | |
408 Setting the frame parameters `scroll-bar-foreground' and | |
409 `scroll-bar-background' sets foreground and background color of face | |
410 `scroll-bar' and vice versa. Setting frame parameter `border-color' | |
411 sets the background color of face `border' and vice versa. Likewise | |
412 for frame parameters `cursor-color' and face `cursor', and frame | |
413 parameter `mouse-color' and face `mouse'. | |
414 | |
415 Changing frame parameter `font' sets font-related attributes of the | |
416 `default' face and vice versa. Setting frame parameters | |
26264 | 417 `foreground-color' or `background-color' sets the colors of the |
25853 | 418 `default' face and vice versa. |
419 | |
31036
b8536256a5e8
Mark the `menu' face as already documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31034
diff
changeset
|
420 +++ |
25951 | 421 ** New face `menu'. |
422 | |
423 The face `menu' can be used to change colors and font of Emacs' menus. | |
424 Setting the font of LessTif/Motif menus is currently not supported; | |
425 attempts to set the font are ignored in this case. | |
426 | |
31007 | 427 +++ |
25853 | 428 ** New frame parameter `screen-gamma' for gamma correction. |
429 | |
430 The new frame parameter `screen-gamma' specifies gamma-correction for | |
431 colors. Its value may be nil, the default, in which case no gamma | |
432 correction occurs, or a number > 0, usually a float, that specifies | |
433 the screen gamma of a frame's display. | |
434 | |
435 PC monitors usually have a screen gamma of 2.2. smaller values result | |
436 in darker colors. You might want to try a screen gamma of 1.5 for LCD | |
437 color displays. The viewing gamma Emacs uses is 0.4545. (1/2.2). | |
438 | |
439 The X resource name of this parameter is `screenGamma', class | |
440 `ScreenGamma'. | |
441 | |
442 ** Emacs has a new redisplay engine. | |
443 | |
444 The new redisplay handles characters of variable width and height. | |
445 Italic text can be used without redisplay problems. Fonts containing | |
446 oversized characters, i.e. characters larger than the logical height | |
447 of a font can be used. Images of various formats can be displayed in | |
448 the text. | |
449 | |
450 ** Emacs has a new face implementation. | |
451 | |
452 The new faces no longer fundamentally use X font names to specify the | |
453 font. Instead, each face has several independent attributes--family, | |
454 height, width, weight and slant--that it may or may not specify. | |
455 These attributes can be merged from various faces, and then together | |
456 specify a font. | |
457 | |
458 Faces are supported on terminals that can display color or fonts. | |
459 These terminal capabilities are auto-detected. Details can be found | |
460 under Lisp changes, below. | |
461 | |
462 ** New default font is Courier 12pt. | |
463 | |
31007 | 464 +++ |
465 ** When using a windowing terminal, each Emacs window now has a cursor | |
466 of its own. When the window is selected, the cursor is solid; | |
467 otherwise, it is hollow. | |
25853 | 468 |
469 ** Bitmap areas to the left and right of windows are used to display | |
470 truncation marks, continuation marks, overlay arrows and alike. The | |
471 foreground, background, and stipple of these areas can be changed by | |
472 customizing face `fringe'. | |
473 | |
474 ** The mode line under X is now drawn with shadows by default. You | |
475 can change its appearance by modifying the face `modeline'. | |
476 | |
477 ** LessTif support. | |
478 | |
31007 | 479 Emacs now runs with the LessTif toolkit (see <http://www.lesstif.org>). |
480 You will need a version 0.88.1 or later. | |
25853 | 481 |
482 ** Toolkit scroll bars. | |
483 | |
484 Emacs now uses toolkit scrollbars if available. When configured for | |
485 LessTif/Motif, it will use that toolkit's scrollbar. Otherwise, when | |
486 configured for Lucid and Athena widgets, it will use the Xaw3d scroll | |
487 bar if Xaw3d is available. You can turn off the use of toolkit scroll | |
488 bars by specifying `--with-toolkit-scroll-bars=no' when configuring | |
489 Emacs. | |
490 | |
491 When you encounter problems with the Xaw3d scroll bar, watch out how | |
492 Xaw3d is compiled on your system. If the Makefile generated from | |
493 Xaw3d's Imakefile contains a `-DNARROWPROTO' compiler option, and your | |
494 Emacs system configuration file `s/your-system.h' does not contain a | |
495 define for NARROWPROTO, you might consider adding it. Take | |
496 `s/freebsd.h' as an example. | |
497 | |
498 Alternatively, if you don't have access to the Xaw3d source code, take | |
499 a look at your system's imake configuration file, for example in the | |
500 directory `/usr/X11R6/lib/X11/config' (paths are different on | |
501 different systems). You will find files `*.cf' there. If your | |
502 system's cf-file contains a line like `#define NeedWidePrototypes NO', | |
503 add a `#define NARROWPROTO' to your Emacs system configuration file. | |
504 | |
505 The reason for this is that one Xaw3d function uses `double' or | |
506 `float' function parameters depending on the setting of NARROWPROTO. | |
507 This is not a problem when Imakefiles are used because each system's | |
508 image configuration file contains the necessary information. Since | |
509 Emacs doesn't use imake, this has do be done manually. | |
510 | |
511 ** Toggle buttons and radio buttons in menus. | |
512 | |
513 When compiled with LessTif (or Motif) support, Emacs uses toolkit | |
514 widgets for radio and toggle buttons in menus. When configured for | |
515 Lucid, Emacs draws radio buttons and toggle buttons similar to Motif. | |
516 | |
31007 | 517 +++ |
25853 | 518 ** Highlighting of trailing whitespace. |
519 | |
520 When `show-trailing-whitespace' is non-nil, Emacs displays trailing | |
521 whitespace in the face `trailing-whitespace'. Trailing whitespace is | |
522 defined as spaces or tabs at the end of a line. To avoid busy | |
523 highlighting when entering new text, trailing whitespace is not | |
524 displayed if point is at the end of the line containing the | |
525 whitespace. | |
526 | |
31040
5c62643e2061
Mark busy-cursor as being documented.
Eli Zaretskii <eliz@gnu.org>
parents:
31036
diff
changeset
|
527 +++ |
25853 | 528 ** Busy-cursor. |
529 | |
530 Emacs can optionally display a busy-cursor under X. You can turn the | |
531 display on or off by customizing group `cursor'. | |
532 | |
31007 | 533 +++ |
25853 | 534 ** Blinking cursor |
535 | |
536 M-x blink-cursor-mode toggles a blinking cursor under X and on | |
537 terminals having terminal capabilities `vi', `vs', and `ve'. Blinking | |
538 and related parameters like frequency and delay can be customized in | |
539 the group `cursor'. | |
540 | |
541 ** New font-lock support mode `jit-lock-mode'. | |
542 | |
543 This support mode is roughly equivalent to `lazy-lock' but is | |
544 generally faster. It supports stealth and deferred fontification. | |
545 See the documentation of the function `jit-lock-mode' for more | |
546 details. | |
547 | |
548 Font-lock uses jit-lock-mode as default support mode, so you don't | |
549 have to do anything to activate it. | |
550 | |
551 ** Tabs and variable-width text. | |
552 | |
553 Tabs are now displayed with stretch properties; the width of a tab is | |
554 defined as a multiple of the normal character width of a frame, and is | |
555 independent of the fonts used in the text where the tab appears. | |
556 Thus, tabs can be used to line up text in different fonts. | |
557 | |
558 ** Enhancements of the Lucid menu bar | |
559 | |
31007 | 560 +++ |
25853 | 561 *** The Lucid menu bar now supports the resource "margin". |
562 | |
563 emacs.pane.menubar.margin: 5 | |
564 | |
28677
950ff4674e17
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
28660
diff
changeset
|
565 The default margin is 4 which makes the menu bar appear like the |
950ff4674e17
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
28660
diff
changeset
|
566 LessTif/Motif one. |
950ff4674e17
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
28660
diff
changeset
|
567 |
950ff4674e17
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
28660
diff
changeset
|
568 *** Arrows that indicate sub-menus are now drawn with shadows, as in |
950ff4674e17
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
28660
diff
changeset
|
569 LessTif and Motif. |
25853 | 570 |
31042
bff0e9c38c5d
Mark automatic-hscrolling as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31040
diff
changeset
|
571 +++ |
25853 | 572 ** Hscrolling in C code. |
573 | |
28695 | 574 Horizontal scrolling now happens automatically if |
575 `automatic-hscrolling' is set (the default). This setting can be | |
576 customized. | |
25853 | 577 |
578 ** Tool bar support. | |
579 | |
580 Emacs supports a tool bar at the top of a frame under X. For details | |
581 how to define a tool bar, see the page describing Lisp-level changes. | |
31741 | 582 Tool-bar global minor mode controls whether or not it is displayed. |
583 To make the tool bar more useful, we need contributions of extra icons | |
584 for specific modes (with copyright assignments). | |
25853 | 585 |
31007 | 586 +++ |
25853 | 587 ** Mouse-sensitive mode line. |
588 | |
589 Different parts of the mode line under X have been made | |
590 mouse-sensitive. Moving the mouse to a mouse-sensitive part in the mode | |
591 line changes the appearance of the mouse pointer to an arrow, and help | |
592 about available mouse actions is displayed either in the echo area, or | |
593 in the tooltip window if you have enabled one. | |
594 | |
595 Currently, the following actions have been defined: | |
596 | |
597 - Mouse-1 on the buffer name in the mode line switches between two | |
598 buffers. | |
599 | |
600 - Mouse-2 on the buffer-name switches to the next buffer, and | |
601 M-mouse-2 switches to the previous buffer in the buffer list. | |
602 | |
603 - Mouse-3 on the buffer-name displays a buffer menu. | |
604 | |
31007 | 605 - Mouse-2 on the read-only or modified status in the mode line (`%' or |
606 `*') toggles the status. | |
25853 | 607 |
608 - Mouse-3 on the mode name display a minor-mode menu. | |
609 | |
610 ** LessTif/Motif file selection dialog. | |
611 | |
612 When Emacs is configured to use LessTif or Motif, reading a file name | |
26652 | 613 from a menu will pop up a file selection dialog if `use-dialog-box' is |
25853 | 614 non-nil. |
615 | |
616 ** Emacs can display faces on TTY frames. | |
617 | |
618 Emacs automatically detects terminals that are able to display colors. | |
619 Faces with a weight greater than normal are displayed extra-bright, if | |
620 the terminal supports it. Faces with a weight less than normal and | |
621 italic faces are displayed dimmed, if the terminal supports it. | |
622 Underlined faces are displayed underlined if possible. Other face | |
29962
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
623 attributes such as `overline', `strike-through', and `box' are ignored |
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
624 on terminals. |
25853 | 625 |
626 ** Sound support | |
627 | |
30012 | 628 Emacs supports playing sound files on GNU/Linux and FreeBSD (Voxware |
30121
f67697912c81
Correct a typo ("aka as" -> "a.k.a.").
Eli Zaretskii <eliz@gnu.org>
parents:
30111
diff
changeset
|
629 driver and native BSD driver, a.k.a. Luigi's driver). Currently |
30012 | 630 supported file formats are RIFF-WAVE (*.wav) and Sun Audio (*.au). |
25853 | 631 |
31007 | 632 +++ |
25853 | 633 ** A new variable, backup-by-copying-when-privileged-mismatch, gives |
634 the highest file uid for which backup-by-copying-when-mismatch will be | |
635 forced on. The assumption is that uids less than or equal to this | |
636 value are special uids (root, bin, daemon, etc.--not real system | |
637 users) and that files owned by these users should not change ownership, | |
638 even if your system policy allows users other than root to edit them. | |
639 | |
640 The default is 200; set the variable to nil to disable the feature. | |
641 | |
31045
a82ae0d01b33
Mark x-stretch-cursor as being documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31042
diff
changeset
|
642 +++ |
25853 | 643 ** A block cursor can be drawn as wide as the glyph under it under X. |
644 | |
645 As an example: if a block cursor is over a tab character, it will be | |
646 drawn as wide as that tab on the display. To do this, set | |
647 `x-stretch-cursor' to a non-nil value. | |
648 | |
31047
0a8115d19f8e
Mark indicate-empty-lines as being documented.
Eli Zaretskii <eliz@gnu.org>
parents:
31045
diff
changeset
|
649 +++ |
25853 | 650 ** Empty display lines at the end of a buffer may be marked with a |
651 bitmap (this is similar to the tilde displayed by vi). | |
652 | |
653 This behavior is activated by setting the buffer-local variable | |
654 `indicate-empty-lines' to a non-nil value. The default value of this | |
655 variable is found in `default-indicate-empty-lines'. | |
656 | |
31127
acdb063c2011
Mark scroll-*-aggressively as being documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31124
diff
changeset
|
657 +++ |
25853 | 658 ** There is a new "aggressive" scrolling method. |
659 | |
660 When scrolling up because point is above the window start, if the | |
661 value of the buffer-local variable `scroll-up-aggessively' is a | |
662 number, Emacs chooses a new window start so that point ends up that | |
31124 | 663 fraction of the window's height from the top of the window. |
25853 | 664 |
665 When scrolling down because point is below the window end, if the | |
666 value of the buffer-local variable `scroll-down-aggessively' is a | |
667 number, Emacs chooses a new window start so that point ends up that | |
31124 | 668 fraction of the window's height from the bottom of the window. |
25853 | 669 |
670 ** The rectangle commands now avoid inserting undesirable spaces, | |
671 notably at the end of lines. | |
672 | |
673 All these functions have been rewritten to avoid inserting unwanted | |
674 spaces, and an optional prefix now allows them to behave the old way. | |
675 | |
31007 | 676 +++ |
28132 | 677 There is a new command M-x replace-rectangle. |
678 | |
25853 | 679 ** The new command M-x query-replace-regexp-eval acts like |
680 query-replace-regexp, but takes a Lisp expression which is evaluated | |
681 after each match to get the replacement text. | |
682 | |
31049
c5e2705a7119
Mark the `e' command in query-replace as being documented.
Eli Zaretskii <eliz@gnu.org>
parents:
31047
diff
changeset
|
683 +++ |
29972 | 684 ** M-x query-replace recognizes a new command `e' (or `E') that lets |
685 you edit the replacement string. | |
28805 | 686 |
31007 | 687 ** The new command mail-abbrev-complete-alias, bound to `M-TAB', lets |
28805 | 688 you complete mail aliases in the text, analogous to |
689 lisp-complete-symbol. | |
690 | |
31051
37d565afa4ae
Mark max-mini-window-height as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31049
diff
changeset
|
691 +++ |
25853 | 692 ** Emacs now resizes mini-windows if appropriate. |
693 | |
29962
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
694 If a message is longer than one line, or minibuffer contents are |
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
695 longer than one line, Emacs now resizes the minibuffer window unless |
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
696 it is on a frame of its own. You can control the maximum minibuffer |
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
697 window size by setting the following variable: |
25853 | 698 |
699 - User option: max-mini-window-height | |
700 | |
701 Maximum height for resizing mini-windows. If a float, it specifies a | |
702 fraction of the mini-window frame's height. If an integer, it | |
703 specifies a number of lines. If nil, don't resize. | |
704 | |
705 Default is 0.25. | |
706 | |
30111 | 707 ** The command `Info-search' now uses a search history. |
708 | |
27017 | 709 ** Changes to hideshow.el |
710 | |
711 Hideshow is now at version 5.x. It uses a new algorithms for block | |
31858
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
712 selection and traversal, includes more isearch support, and has more |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
713 conventional keybindings. |
27017 | 714 |
715 *** Generalized block selection and traversal | |
716 | |
717 A block is now recognized by three things: its start and end regexps | |
718 (both strings), and a match-data selector (an integer) specifying | |
719 which sub-expression in the start regexp serves as the place where a | |
720 `forward-sexp'-like function can operate. Hideshow always adjusts | |
721 point to this sub-expression before calling `hs-forward-sexp-func' | |
722 (which for most modes evaluates to `forward-sexp'). | |
723 | |
724 If the match-data selector is not specified, it defaults to zero, | |
725 i.e., the entire start regexp is valid, w/ no prefix. This is | |
726 backwards compatible with previous versions of hideshow. Please see | |
727 the docstring for variable `hs-special-modes-alist' for details. | |
728 | |
729 *** Isearch support for updating mode line | |
730 | |
731 During incremental search, if Hideshow minor mode is active, hidden | |
732 blocks are temporarily shown. The variable `hs-headline' records the | |
733 line at the beginning of the opened block (preceding the hidden | |
734 portion of the buffer), and the mode line is refreshed. When a block | |
735 is re-hidden, the variable is set to nil. | |
736 | |
737 To show `hs-headline' in the mode line, you may wish to include | |
738 something like this in your .emacs. | |
739 | |
740 (add-hook 'hs-minor-mode-hook | |
741 (lambda () | |
742 (add-to-list 'mode-line-format 'hs-headline))) | |
743 | |
31858
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
744 *** New customization var: `hs-hide-all-non-comment-function' |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
745 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
746 Normally, `hs-hide-all' hides everything, leaving only the |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
747 header lines of top-level forms (and comments, unless var |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
748 `hs-hide-comments-when-hiding-all' is non-nil). It does this by |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
749 moving point to each top-level block beginning and hiding the |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
750 block there. In some major modes (for example, Java), this |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
751 behavior results in few blocks left visible, which may not be so |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
752 useful. |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
753 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
754 You can now set var `hs-hide-all-non-comment-function' to a |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
755 function to be called at each top-level block beginning, instead |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
756 of the normal block-hiding function. For example, the following |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
757 code defines a function to hide one level down and move point |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
758 appropriately, and then tells hideshow to use the new function. |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
759 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
760 (defun ttn-hs-hide-level-1 () |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
761 (hs-hide-level 1) |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
762 (forward-sexp 1)) |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
763 (setq hs-hide-all-non-comment-function 'ttn-hs-hide-level-1) |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
764 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
765 The name `hs-hide-all-non-comment-function' was chosen to |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
766 emphasize that this function is not called for comment blocks, |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
767 only for code blocks. |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
768 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
769 *** Command deleted: `hs-show-region' |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
770 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
771 Historical Note: This command was added to handle "unbalanced |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
772 parentheses" emergencies back when hideshow.el used selective |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
773 display for implementation. |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
774 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
775 *** Commands rebound to more conventional keys |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
776 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
777 The hideshow commands used to be bound to keys of the form "C-c |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
778 LETTER". This is contrary to the Emacs keybinding convention, |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
779 which reserves that space for user modification. Here are the |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
780 new bindings (which includes the addition of `hs-toggle-hiding'): |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
781 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
782 hs-hide-block C-c C-h |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
783 hs-show-block C-c C-s |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
784 hs-hide-all C-c C-M-h |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
785 hs-show-all C-c C-M-s |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
786 hs-hide-level C-c C-l |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
787 hs-toggle-hiding C-c C-c |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
788 hs-mouse-toggle-hiding [(shift button-2)] |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
789 |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
790 These were chosen to roughly imitate those used by Outline mode. |
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
791 |
27266
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
792 ** Changes to Change Log mode and Add-Log functions |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
793 |
31007 | 794 +++ |
31816 | 795 *** If you invoke `add-change-log-entry' from a backup file, it makes |
796 an entry appropriate for the file's parent. This is useful for making | |
27266
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
797 log entries by comparing a version with deleted functions. |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
798 |
31007 | 799 +++ |
31816 | 800 **** New command M-x change-log-merge merges another log into the |
801 current buffer. | |
802 | |
803 +++ | |
804 *** New command M-x change-log-redate fixes any old-style date entries | |
805 in a log file. | |
806 | |
807 +++ | |
808 *** Change Log mode now adds a file's version number to change log | |
809 entries if user-option `change-log-version-info-enabled' is non-nil. | |
810 | |
811 +++ | |
812 *** Unless the file is under version control the search for a file's | |
31007 | 813 version number is performed based on regular expressions from |
814 `change-log-version-number-regexp-list' which can be cutomized. | |
815 Version numbers are only found in the first 10 percent of a file. | |
27005
e9167a5cfad2
Alto's change to add-log.el.
Gerd Moellmann <gerd@gnu.org>
parents:
26964
diff
changeset
|
816 |
31816 | 817 *** Change Log mode now defines its own faces for font-lock |
818 highlighting. | |
819 | |
26964
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
820 ** Changes in Font Lock |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
821 |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
822 *** The new function `font-lock-remove-keywords' can be used to remove |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
823 font-lock keywords from the current buffer or from a specific major |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
824 mode. |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
825 |
26606 | 826 ** Comint (subshell) changes |
827 | |
30650
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
828 By default, comint no longer uses the variable `comint-prompt-regexp' to |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
829 distiguish prompts from user-input. Instead, it notices which parts of |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
830 the text were output by the process, and which entered by the user, and |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
831 attaches `field' properties to allow emacs commands to use this information. |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
832 Common movement commands, notably beginning-of-line, respect field |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
833 boundaries in a fairly natural manner. |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
834 To disable this feature, and use the old behavior, set the variable |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
835 `comint-use-prompt-regexp-instead-of-fields' to a non-nil value. |
db7dfd959c19
Add note about comint field changes (`comint-prompt-regexp removal').
Miles Bader <miles@gnu.org>
parents:
30576
diff
changeset
|
836 |
26606 | 837 Comint now includes new features to send commands to running processes |
838 and redirect the output to a designated buffer or buffers. | |
839 | |
840 The command M-x comint-redirect-send-command reads a command and | |
841 buffer name from the mini-buffer. The command is sent to the current | |
842 buffer's process, and its output is inserted into the specified buffer. | |
843 | |
844 The command M-x comint-redirect-send-command-to-process acts like | |
845 M-x comint-redirect-send-command but additionally reads the name of | |
846 the buffer whose process should be used from the mini-buffer. | |
847 | |
30759
408aec5f514c
Mention comint prompt highlighting.
Miles Bader <miles@gnu.org>
parents:
30693
diff
changeset
|
848 Packages based on comint.el like shell-mode, and scheme-interaction-mode |
408aec5f514c
Mention comint prompt highlighting.
Miles Bader <miles@gnu.org>
parents:
30693
diff
changeset
|
849 now highlight user input and program prompts, and support choosing |
408aec5f514c
Mention comint prompt highlighting.
Miles Bader <miles@gnu.org>
parents:
30693
diff
changeset
|
850 previous input with mouse-2. To control these feature, see the |
408aec5f514c
Mention comint prompt highlighting.
Miles Bader <miles@gnu.org>
parents:
30693
diff
changeset
|
851 user-options `comint-highlight-input' and `comint-highlight-prompt'. |
30319 | 852 |
26835
44fd08970a49
RET bound in Rmail summary.
Gerd Moellmann <gerd@gnu.org>
parents:
26834
diff
changeset
|
853 ** Changes to Rmail mode |
44fd08970a49
RET bound in Rmail summary.
Gerd Moellmann <gerd@gnu.org>
parents:
26834
diff
changeset
|
854 |
28492 | 855 *** The new user-option rmail-rmail-user-mail-address-regexp can be |
856 set to fine tune the identification of of the correspondent when | |
857 receiving new mail. If it matches the address of the sender, the | |
858 recipient is taken as correspondent of a mail. If nil, the default, | |
859 `user-login-name' and `user-mail-address' are used to exclude yourself | |
860 as correspondent. | |
861 | |
862 Usually you don't have to set this variable, except if you collect | |
863 mails sent by you under different user names. Then it should be a | |
29162 | 864 regexp matching your mail addresses. |
28492 | 865 |
28292 | 866 *** The new user-option rmail-confirm-expunge controls whether and how |
867 to ask for confirmation before expunging deleted messages from an | |
868 Rmail file. You can choose between no confirmation, confirmation | |
869 with y-or-n-p, or confirmation with yes-or-no-p. Default is to ask | |
870 for confirmation with yes-or-no-p. | |
871 | |
27361 | 872 *** RET is now bound in the Rmail summary to rmail-summary-goto-msg, |
873 like `j'. | |
874 | |
27381
622e861dce48
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27378
diff
changeset
|
875 *** There is a new user option `rmail-digest-end-regexps' that |
622e861dce48
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27378
diff
changeset
|
876 specifies the regular expressions to detect the line that ends a |
27378
af3075bcc264
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27369
diff
changeset
|
877 digest message. |
26835
44fd08970a49
RET bound in Rmail summary.
Gerd Moellmann <gerd@gnu.org>
parents:
26834
diff
changeset
|
878 |
29162 | 879 *** The new user option `rmail-automatic-folder-directives' specifies |
880 in which folder to put messages automatically. | |
881 | |
26271 | 882 ** Changes to TeX mode |
883 | |
884 The default mode has been changed from `plain-tex-mode' to | |
885 `latex-mode'. | |
886 | |
25853 | 887 ** Changes to RefTeX mode |
888 | |
889 *** RefTeX has new support for index generation. Index entries can be | |
890 created with `C-c <', with completion available on index keys. | |
891 Pressing `C-c /' indexes the word at the cursor with a default | |
892 macro. `C-c >' compiles all index entries into an alphabetically | |
893 sorted *Index* buffer which looks like the final index. Entries | |
894 can be edited from that buffer. | |
895 | |
896 *** Label and citation key selection now allow to select several | |
897 items and reference them together (use `m' to mark items, `a' or | |
898 `A' to use all marked entries). | |
899 | |
900 *** reftex.el has been split into a number of smaller files to reduce | |
901 memory use when only a part of RefTeX is being used. | |
902 | |
903 *** a new command `reftex-view-crossref-from-bibtex' (bound to `C-c &' | |
904 in BibTeX-mode) can be called in a BibTeX database buffer in order | |
905 to show locations in LaTeX documents where a particular entry has | |
906 been cited. | |
907 | |
26684
5ffc1f61b1d4
Add description of changed outline-regexp/new outline-level for
Gerd Moellmann <gerd@gnu.org>
parents:
26652
diff
changeset
|
908 ** Emacs Lisp mode now allows multiple levels of outline headings. |
5ffc1f61b1d4
Add description of changed outline-regexp/new outline-level for
Gerd Moellmann <gerd@gnu.org>
parents:
26652
diff
changeset
|
909 The level of a heading is determined from the number of leading |
5ffc1f61b1d4
Add description of changed outline-regexp/new outline-level for
Gerd Moellmann <gerd@gnu.org>
parents:
26652
diff
changeset
|
910 semicolons in a heading line. Toplevel forms starting with a `(' |
5ffc1f61b1d4
Add description of changed outline-regexp/new outline-level for
Gerd Moellmann <gerd@gnu.org>
parents:
26652
diff
changeset
|
911 in column 1 are always made leaves. |
5ffc1f61b1d4
Add description of changed outline-regexp/new outline-level for
Gerd Moellmann <gerd@gnu.org>
parents:
26652
diff
changeset
|
912 |
25853 | 913 ** The M-x time-stamp command (most commonly used on write-file-hooks) |
914 has the following new features: | |
915 | |
916 *** The patterns for finding the time stamp and for updating a pattern | |
917 may match text spanning multiple lines. For example, some people like | |
918 to have the filename and date on separate lines. The new variable | |
919 time-stamp-inserts-lines controls the matching for multi-line patterns. | |
920 | |
921 *** More than one time stamp can be updated in the same file. This | |
922 feature is useful if you need separate time stamps in a program source | |
923 file to both include in formatted documentation and insert in the | |
924 compiled binary. The same time-stamp will be written at each matching | |
925 pattern. The variable time-stamp-count enables this new feature; it | |
926 defaults to 1. | |
927 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
928 ** Partial Completion mode now completes environment variables in |
29676 | 929 file names. |
930 | |
31007 | 931 +++ |
25853 | 932 ** Tooltips. |
933 | |
934 Tooltips are small X windows displaying a help string at the current | |
935 mouse position. To use them, use the Lisp package `tooltip' which you | |
936 can access via the user option `tooltip-mode'. | |
937 | |
938 Tooltips also provides support for GUD debugging. If activated, | |
939 variable values can be displayed in tooltips by pointing at them with | |
940 the mouse in source buffers. You can customize various aspects of the | |
941 tooltip display in the group `tooltip'. | |
942 | |
31007 | 943 +++ |
25853 | 944 ** Customize changes |
945 | |
946 *** Customize now supports comments about customized items. Use the | |
26096 | 947 `State' menu to add comments. Note that customization comments will |
948 cause the customizations to fail in earlier versions of Emacs. | |
25853 | 949 |
950 *** The new option `custom-buffer-done-function' says whether to kill | |
951 Custom buffers when you've done with them or just bury them (the | |
952 default). | |
953 | |
26834
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
954 *** The keyword :set-after in defcustom allows to specify dependencies |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
955 between custom options. Example: |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
956 |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
957 (defcustom default-input-method nil |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
958 "*Default input method for multilingual text (a string). |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
959 This is the input method activated automatically by the command |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
960 `toggle-input-method' (\\[toggle-input-method])." |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
961 :group 'mule |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
962 :type '(choice (const nil) string) |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
963 :set-after '(current-language-environment)) |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
964 |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
965 This specifies that default-input-method should be set after |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
966 current-language-environment even if default-input-method appears |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
967 first in a custom-set-variables statement. |
782476a34d9d
Custom option keyword :set-after.
Gerd Moellmann <gerd@gnu.org>
parents:
26820
diff
changeset
|
968 |
25853 | 969 ** New features in evaluation commands |
970 | |
30056 | 971 *** The commands to evaluate Lisp expressions, such as C-M-x in Lisp |
25853 | 972 modes, C-j in Lisp Interaction mode, and M-:, now bind the variables |
973 print-level, print-length, and debug-on-error based on the | |
974 customizable variables eval-expression-print-level, | |
975 eval-expression-print-length, and eval-expression-debug-on-error. | |
976 | |
30056 | 977 *** The function `eval-defun' (M-C-x) now loads Edebug and instruments |
978 code when called with a prefix argument. | |
979 | |
30564 | 980 ** Ispell changes |
981 | |
31061
457c0b39a922
Mark `ispell' and the DOZe'NT support as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31058
diff
changeset
|
982 +++ |
30568
904cda56fa16
Fix typos in the entry for `ispell' command.
Eli Zaretskii <eliz@gnu.org>
parents:
30565
diff
changeset
|
983 *** The command `ispell' now spell-checks a region if |
904cda56fa16
Fix typos in the entry for `ispell' command.
Eli Zaretskii <eliz@gnu.org>
parents:
30565
diff
changeset
|
984 transient-mark-mode is on, and the mark is active. Otherwise it |
30564 | 985 spell-checks the current buffer. |
986 | |
31061
457c0b39a922
Mark `ispell' and the DOZe'NT support as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31058
diff
changeset
|
987 +++ |
30937 | 988 *** Support for synchronous subprocesses - DOS/Windoze - has been |
989 added. | |
990 | |
991 *** An "alignment error" bug was fixed when a manual spelling | |
992 correction is made and re-checked. | |
993 | |
30948 | 994 *** An Italian and a Portuguese dictionary definition has been added. |
30937 | 995 |
996 *** Region skipping performance has been vastly improved in some | |
997 cases. | |
998 | |
999 *** Spell checking HTML buffers has been improved and isn't so strict | |
1000 on syntax errors. | |
1001 | |
1002 *** The buffer-local words are now always placed on a new line at the | |
1003 end of the buffer. | |
1004 | |
25853 | 1005 ** Dired changes |
1006 | |
1007 *** New variable `dired-recursive-deletes' determines if the delete | |
1008 command will delete non-empty directories recursively. The default | |
1009 is, delete only empty directories. | |
1010 | |
1011 *** New variable `dired-recursive-copies' determines if the copy | |
1012 command will copy directories recursively. The default is, do not | |
1013 copy directories recursively. | |
1014 | |
26728
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1015 *** In command `dired-do-shell-command' (usually bound to `!') a `?' |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1016 in the shell command has a special meaning similar to `*', but with |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1017 the difference that the command will be run on each file individually. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1018 |
30111 | 1019 *** The new command `dired-find-alternate-file' (usually bound to `a') |
1020 replaces the Dired buffer with the buffer for an alternate file or | |
1021 directory. | |
1022 | |
30278
88f980a73f48
Add entry for new `dired-show-file-type' command.
Miles Bader <miles@gnu.org>
parents:
30222
diff
changeset
|
1023 *** The new command `dired-show-file-type' (usually bound to `w') shows |
88f980a73f48
Add entry for new `dired-show-file-type' command.
Miles Bader <miles@gnu.org>
parents:
30222
diff
changeset
|
1024 a message in the echo area describing what type of file the point is on. |
88f980a73f48
Add entry for new `dired-show-file-type' command.
Miles Bader <miles@gnu.org>
parents:
30222
diff
changeset
|
1025 This command invokes the external program `file' do its work, and so |
88f980a73f48
Add entry for new `dired-show-file-type' command.
Miles Bader <miles@gnu.org>
parents:
30222
diff
changeset
|
1026 will only work on systems with that program, and will be only as |
88f980a73f48
Add entry for new `dired-show-file-type' command.
Miles Bader <miles@gnu.org>
parents:
30222
diff
changeset
|
1027 accurate or inaccurate as it is. |
88f980a73f48
Add entry for new `dired-show-file-type' command.
Miles Bader <miles@gnu.org>
parents:
30222
diff
changeset
|
1028 |
30415 | 1029 *** Dired now properly handles undo changes of adding/removing `-R' |
1030 from ls switches. | |
1031 | |
25853 | 1032 ** The variable mail-specify-envelope-from controls whether to |
1033 use the -f option when sending mail. | |
1034 | |
26820 | 1035 ** CC mode changes. |
1036 | |
1037 Note: This release contains changes that might not be compatible with | |
1038 current user setups (although it's believed that these | |
1039 incompatibilities will only show in very uncommon circumstances). | |
1040 However, since the impact is uncertain, these changes may be rolled | |
1041 back depending on user feedback. Therefore there's no forward | |
1042 compatibility guarantee wrt the new features introduced in this | |
1043 release. | |
1044 | |
30412 | 1045 *** c-style-variables-are-local-p now defaults to t. |
1046 This is an incompatible change that has been made to make the behavior | |
1047 of the style system wrt global variable settings less confusing for | |
1048 non-advanced users. If you know what this variable does you might | |
1049 want to set it to nil in your .emacs, otherwise you probably don't | |
1050 have to bother. | |
1051 | |
1052 Defaulting c-style-variables-are-local-p to t avoids the confusing | |
1053 situation that occurs when a user sets some style variables globally | |
30445 | 1054 and edits both a Java and a non-Java file in the same Emacs session. |
30412 | 1055 If the style variables aren't buffer local in this case, loading of |
1056 the second file will cause the default style (either "gnu" or "java" | |
1057 by default) to override the global settings made by the user. | |
1058 | |
26820 | 1059 *** New initialization procedure for the style system. |
1060 When the initial style for a buffer is determined by CC Mode (from the | |
1061 variable c-default-style), the global values of style variables now | |
1062 take precedence over the values specified by the chosen style. This | |
1063 is different than the old behavior: previously, the style-specific | |
1064 settings would override the global settings. This change makes it | |
1065 possible to do simple configuration in the intuitive way with | |
1066 Customize or with setq lines in one's .emacs file. | |
1067 | |
1068 By default, the global value of every style variable is the new | |
1069 special symbol set-from-style, which causes the value to be taken from | |
1070 the style system. This means that in effect, only an explicit setting | |
1071 of a style variable will cause the "overriding" behavior described | |
1072 above. | |
1073 | |
1074 Also note that global settings override style-specific settings *only* | |
1075 when the initial style of a buffer is chosen by a CC Mode major mode | |
1076 function. When a style is chosen in other ways --- for example, by a | |
1077 call like (c-set-style "gnu") in a hook, or via M-x c-set-style --- | |
1078 then the style-specific values take precedence over any global style | |
1079 values. In Lisp terms, global values override style-specific values | |
1080 only when the new second argument to c-set-style is non-nil; see the | |
1081 function documentation for more info. | |
1082 | |
1083 The purpose of these changes is to make it easier for users, | |
1084 especially novice users, to do simple customizations with Customize or | |
1085 with setq in their .emacs files. On the other hand, the new system is | |
1086 intended to be compatible with advanced users' customizations as well, | |
1087 such as those that choose styles in hooks or whatnot. This new system | |
1088 is believed to be almost entirely compatible with current | |
1089 configurations, in spite of the changed precedence between style and | |
1090 global variable settings when a buffer's default style is set. | |
1091 | |
1092 (Thanks to Eric Eide for clarifying this explanation a bit.) | |
1093 | |
1094 **** c-offsets-alist is now a customizable variable. | |
1095 This became possible as a result of the new initialization behavior. | |
1096 | |
1097 This variable is treated slightly differently from the other style | |
1098 variables; instead of using the symbol set-from-style, it will be | |
1099 completed with the syntactic symbols it doesn't already contain when | |
1100 the style is first initialized. This means it now defaults to the | |
1101 empty list to make all syntactic elements get their values from the | |
1102 style system. | |
1103 | |
1104 **** Compatibility variable to restore the old behavior. | |
1105 In case your configuration doesn't work with this change, you can set | |
1106 c-old-style-variable-behavior to non-nil to get the old behavior back | |
1107 as far as possible. | |
1108 | |
1109 *** Improvements to line breaking and text filling. | |
1110 CC Mode now handles this more intelligently and seamlessly wrt the | |
1111 surrounding code, especially inside comments. For details see the new | |
1112 chapter about this in the manual. | |
1113 | |
1114 **** New variable to recognize comment line prefix decorations. | |
1115 The variable c-comment-prefix-regexp has been added to properly | |
1116 recognize the line prefix in both block and line comments. It's | |
1117 primarily used to initialize the various paragraph recognition and | |
1118 adaptive filling variables that the text handling functions uses. | |
1119 | |
1120 **** New variable c-block-comment-prefix. | |
1121 This is a generalization of the now obsolete variable | |
1122 c-comment-continuation-stars to handle arbitrary strings. | |
1123 | |
1124 **** CC Mode now uses adaptive fill mode. | |
1125 This to make it adapt better to the paragraph style inside comments. | |
1126 | |
1127 It's also possible to use other adaptive filling packages inside CC | |
1128 Mode, notably Kyle E. Jones' Filladapt mode (http://wonderworks.com/). | |
1129 A new convenience function c-setup-filladapt sets up Filladapt for use | |
1130 inside CC Mode. | |
1131 | |
1132 Note though that the 2.12 version of Filladapt lacks a feature that | |
1133 causes it to work suboptimally when c-comment-prefix-regexp can match | |
1134 the empty string (which it commonly does). A patch for that is | |
1135 available from the CC Mode web site (http://www.python.org/emacs/ | |
1136 cc-mode/). | |
1137 | |
1138 **** It's now possible to selectively turn off auto filling. | |
1139 The variable c-ignore-auto-fill is used to ignore auto fill mode in | |
1140 specific contexts, e.g. in preprocessor directives and in string | |
1141 literals. | |
1142 | |
1143 **** New context sensitive line break function c-context-line-break. | |
1144 It works like newline-and-indent in normal code, and adapts the line | |
1145 prefix according to the comment style when used inside comments. If | |
1146 you're normally using newline-and-indent, you might want to switch to | |
1147 this function. | |
1148 | |
1149 *** Fixes to IDL mode. | |
1150 It now does a better job in recognizing only the constructs relevant | |
1151 to IDL. E.g. it no longer matches "class" as the beginning of a | |
1152 struct block, but it does match the CORBA 2.3 "valuetype" keyword. | |
1153 Thanks to Eric Eide. | |
1154 | |
1155 *** Improvements to the Whitesmith style. | |
1156 It now keeps the style consistently on all levels and both when | |
1157 opening braces hangs and when they don't. | |
1158 | |
1159 **** New lineup function c-lineup-whitesmith-in-block. | |
1160 | |
1161 *** New lineup functions c-lineup-template-args and c-indent-multi-line-block. | |
1162 See their docstrings for details. c-lineup-template-args does a | |
1163 better job of tracking the brackets used as parens in C++ templates, | |
1164 and is used by default to line up continued template arguments. | |
1165 | |
1166 *** c-lineup-comment now preserves alignment with a comment on the | |
1167 previous line. It used to instead preserve comments that started in | |
1168 the column specified by comment-column. | |
1169 | |
1170 *** c-lineup-C-comments handles "free form" text comments. | |
1171 In comments with a long delimiter line at the start, the indentation | |
1172 is kept unchanged for lines that start with an empty comment line | |
1173 prefix. This is intended for the type of large block comments that | |
1174 contain documentation with its own formatting. In these you normally | |
1175 don't want CC Mode to change the indentation. | |
1176 | |
1177 *** The `c' syntactic symbol is now relative to the comment start | |
1178 instead of the previous line, to make integers usable as lineup | |
1179 arguments. | |
1180 | |
1181 *** All lineup functions have gotten docstrings. | |
1182 | |
1183 *** More preprocessor directive movement functions. | |
1184 c-down-conditional does the reverse of c-up-conditional. | |
1185 c-up-conditional-with-else and c-down-conditional-with-else are | |
1186 variants of these that also stops at "#else" lines (suggested by Don | |
1187 Provan). | |
1188 | |
1189 *** Minor improvements to many movement functions in tricky situations. | |
1190 | |
28506 | 1191 ** Makefile mode changes |
1192 | |
1193 *** The mode now uses the abbrev table `makefile-mode-abbrev-table'. | |
1194 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1195 *** Conditionals and include statements are now highlighted when |
28506 | 1196 Fontlock mode is active. |
1197 | |
26407 | 1198 ** Isearch changes |
1199 | |
30477 | 1200 *** Isearch now puts a call to `isearch-resume' in the command history, |
1201 so that searches can be resumed. | |
1202 | |
1203 *** In Isearch mode, M-C-s and M-C-r are now bound like C-s and C-r, | |
28506 | 1204 respectively, i.e. you can repeat a regexp isearch with the same keys |
1205 that started the search. | |
1206 | |
26407 | 1207 *** In Isearch mode, mouse-2 in the echo area now yanks the current |
25853 | 1208 selection into the search string rather than giving an error. |
1209 | |
31063
e0e59380736b
Mark isearch-lazy-highlight as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31061
diff
changeset
|
1210 +++ |
26407 | 1211 *** There is a new lazy highlighting feature in incremental search. |
1212 | |
26417 | 1213 Lazy highlighting is switched on/off by customizing variable |
26407 | 1214 `isearch-lazy-highlight'. When active, all matches for the current |
1215 search string are highlighted. The current match is highlighted as | |
1216 before using face `isearch' or `region'. All other matches are | |
1217 highlighted using face `isearch-lazy-highlight-face' which defaults to | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1218 `secondary-selection'. |
26407 | 1219 |
1220 The extra highlighting makes it easier to anticipate where the cursor | |
1221 will end up each time you press C-s or C-r to repeat a pending search. | |
1222 Highlighting of these additional matches happens in a deferred fashion | |
1223 using "idle timers," so the cycles needed do not rob isearch of its | |
1224 usual snappy response. | |
1225 | |
1226 If `isearch-lazy-highlight-cleanup' is set to t, highlights for | |
1227 matches are automatically cleared when you end the search. If it is | |
1228 set to nil, you can remove the highlights manually with `M-x | |
1229 isearch-lazy-highlight-cleanup'. | |
1230 | |
31064
3aa8be9f2e70
Mark sort-numeric-fields and sort-numeric-base as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31063
diff
changeset
|
1231 +++ |
27470
483c021bf376
Change in sort-numeric-fields.
Gerd Moellmann <gerd@gnu.org>
parents:
27387
diff
changeset
|
1232 ** Changes in sort.el |
483c021bf376
Change in sort-numeric-fields.
Gerd Moellmann <gerd@gnu.org>
parents:
27387
diff
changeset
|
1233 |
483c021bf376
Change in sort-numeric-fields.
Gerd Moellmann <gerd@gnu.org>
parents:
27387
diff
changeset
|
1234 The function sort-numeric-fields interprets numbers starting with `0' |
27533
6dfbe5197843
A typo ("ocatal" instead of "octal").
Eli Zaretskii <eliz@gnu.org>
parents:
27498
diff
changeset
|
1235 as octal and numbers starting with `0x' or `0X' as hexadecimal. The |
31064
3aa8be9f2e70
Mark sort-numeric-fields and sort-numeric-base as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31063
diff
changeset
|
1236 new user-option sort-numeric-base can be used to specify a default |
27470
483c021bf376
Change in sort-numeric-fields.
Gerd Moellmann <gerd@gnu.org>
parents:
27387
diff
changeset
|
1237 numeric base. |
26407 | 1238 |
28194 | 1239 ** Changes to Ange-ftp |
1240 | |
31007 | 1241 +++ |
28194 | 1242 *** Ange-ftp allows you to specify of a port number in remote file |
25929 | 1243 names cleanly. It is appended to the host name, separated by a hash |
1244 sign, e.g. `/foo@bar.org#666:mumble'. (This syntax comes from EFS.) | |
1245 | |
28194 | 1246 *** If the new user-option `ange-ftp-try-passive-mode' is set, passive |
1247 ftp mode will be used if the ftp client supports that. | |
1248 | |
30518
ba9bd1bf0ef8
Ange-ftp handles the output of the w32-style clients
Sam Steingold <sds@gnu.org>
parents:
30516
diff
changeset
|
1249 *** Ange-ftp handles the output of the w32-style clients which |
ba9bd1bf0ef8
Ange-ftp handles the output of the w32-style clients
Sam Steingold <sds@gnu.org>
parents:
30516
diff
changeset
|
1250 output ^M at the end of lines. |
ba9bd1bf0ef8
Ange-ftp handles the output of the w32-style clients
Sam Steingold <sds@gnu.org>
parents:
30516
diff
changeset
|
1251 |
25984 | 1252 ** Shell script mode changes. |
1253 | |
1254 Shell script mode (sh-script) can now indent scripts for shells | |
1255 derived from sh and rc. The indentation style is customizeable, and | |
1256 sh-script can attempt to "learn" the current buffer's style. | |
1257 | |
26264 | 1258 ** Etags changes. |
1259 | |
1260 *** In DOS, etags looks for file.cgz if it cannot find file.c. | |
1261 | |
26289
6651db4a4b1f
Document regexp changes in etags.
Francesco Potortì <pot@gnu.org>
parents:
26277
diff
changeset
|
1262 *** New option --ignore-case-regex is an alternative to --regex. It is now |
26292
81cd0c225dd9
Last changes for etags (I hope).
Francesco Potortì <pot@gnu.org>
parents:
26289
diff
changeset
|
1263 possible to bind a regexp to a language, by prepending the regexp with |
81cd0c225dd9
Last changes for etags (I hope).
Francesco Potortì <pot@gnu.org>
parents:
26289
diff
changeset
|
1264 {lang}, where lang is one of the languages that `etags --help' prints out. |
81cd0c225dd9
Last changes for etags (I hope).
Francesco Potortì <pot@gnu.org>
parents:
26289
diff
changeset
|
1265 This feature is useful especially for regex files, where each line contains |
81cd0c225dd9
Last changes for etags (I hope).
Francesco Potortì <pot@gnu.org>
parents:
26289
diff
changeset
|
1266 a regular expression. The manual contains details. |
26289
6651db4a4b1f
Document regexp changes in etags.
Francesco Potortì <pot@gnu.org>
parents:
26277
diff
changeset
|
1267 |
26264 | 1268 *** In C and derived languages, etags creates tags for function |
1269 declarations when given the --declarations option. | |
1270 | |
1271 *** In C++, tags are created for "operator". The tags have the form | |
26289
6651db4a4b1f
Document regexp changes in etags.
Francesco Potortì <pot@gnu.org>
parents:
26277
diff
changeset
|
1272 "operator+", without spaces between the keyword and the operator. |
26264 | 1273 |
1274 *** New language Ada: tags are functions, procedures, packages, tasks, and | |
1275 types. | |
1276 | |
29238 | 1277 *** In Fortran, `procedure' is not tagged. |
26264 | 1278 |
1279 *** In Java, tags are created for "interface". | |
1280 | |
1281 *** In Lisp, "(defstruct (foo", "(defun (operator" and similar constructs | |
1282 are now tagged. | |
1283 | |
1284 *** In Perl, the --globals option tags global variables. my and local | |
1285 variables are tagged. | |
1286 | |
1287 *** New language Python: def and class at the beginning of a line are tags. | |
1288 | |
26292
81cd0c225dd9
Last changes for etags (I hope).
Francesco Potortì <pot@gnu.org>
parents:
26289
diff
changeset
|
1289 *** .ss files are Scheme files, .pdb is Postscript with C syntax, .psw is |
81cd0c225dd9
Last changes for etags (I hope).
Francesco Potortì <pot@gnu.org>
parents:
26289
diff
changeset
|
1290 for PSWrap. |
26264 | 1291 |
31066
8339f8e5c8c8
Mark etags.el changes as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31064
diff
changeset
|
1292 +++ |
26728
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1293 ** Changes in etags.el |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1294 |
28244 | 1295 *** The new user-option tags-case-fold-search can be used to make |
1296 tags operations case-sensitive or case-insensitive. The default | |
1297 is to use the same setting as case-fold-search. | |
1298 | |
26728
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1299 *** You can display additional output with M-x tags-apropos by setting |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1300 the new variable tags-apropos-additional-actions. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1301 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1302 If non-nil, the variable's value should be a list of triples (TITLE |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1303 FUNCTION TO-SEARCH). For each triple, M-x tags-apropos processes |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1304 TO-SEARCH and lists tags from it. TO-SEARCH should be an alist, |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1305 obarray, or symbol. If it is a symbol, the symbol's value is used. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1306 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1307 TITLE is a string to use to label the list of tags from TO-SEARCH. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1308 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1309 FUNCTION is a function to call when an entry is selected in the Tags |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1310 List buffer. It is called with one argument, the selected symbol. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1311 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1312 A useful example value for this variable might be something like: |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1313 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1314 '(("Emacs Lisp" Info-goto-emacs-command-node obarray) |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1315 ("Common Lisp" common-lisp-hyperspec common-lisp-hyperspec-obarray) |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1316 ("SCWM" scwm-documentation scwm-obarray)) |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1317 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1318 *** The face tags-tag-face can be used to customize the appearance |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1319 of tags in the output of M-x tags-apropos. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1320 |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1321 *** Setting tags-apropos-verbose to a non-nil value displays the |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1322 names of tags files in the *Tags List* buffer. |
8a531f428463
Etags.el change moved. Add dired-aux change.
Gerd Moellmann <gerd@gnu.org>
parents:
26718
diff
changeset
|
1323 |
31007 | 1324 +++ |
26140
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
1325 ** Emacs now attempts to determine the initial language environment |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
1326 and preferred and locale coding systems systematically from the |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
1327 LC_ALL, LC_CTYPE, and LANG environment variables during startup. |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
1328 |
31068
38395be86e6d
Mark the new language environments as documented.
Eli Zaretskii <eliz@gnu.org>
parents:
31066
diff
changeset
|
1329 +++ |
29506 | 1330 ** New language environments `Polish', `Latin-8' and `Latin-9'. |
1331 Latin-8 and Latin-9 correspond respectively to the ISO character sets | |
1332 8859-14 (Celtic) and 8859-15 (updated Latin-1, with the Euro sign). | |
31156 | 1333 GNU Intlfonts doesn't support these yet; there are basic 8859-14 and |
1334 8859-15 fonts at <URL:http://czyborra.com/charsets/> and recent X | |
1335 releases have 8859-15. There are new Latin-8 and Latin-9 prefix | |
1336 (only) and Polish slash input methods in Leim. | |
26016 | 1337 |
31007 | 1338 +++ |
29962
cb2595f03c92
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
29949
diff
changeset
|
1339 ** Fortran mode has a new command `fortran-strip-sequence-nos' to |
26652 | 1340 remove text past column 72. The syntax class of `\' in Fortran is now |
1341 appropriate for C-style escape sequences in strings. | |
1342 | |
1343 ** SGML mode's default `sgml-validate-command' is now `nsgmls'. | |
1344 | |
31007 | 1345 +++ |
26768 | 1346 ** A new command `view-emacs-problems' (C-h P) displays the PROBLEMS file. |
1347 | |
31070
5c579e72175d
Mark dabbrev-ignore-regexps as documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31068
diff
changeset
|
1348 +++ |
31156 | 1349 ** The Dabbrev package has a new user-option `dabbrev-ignored-regexps' |
28492 | 1350 containing a list of regular expressions. Buffers matching a regular |
1351 expression from that list, are not checked. | |
1352 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1353 ** Emacs can now figure out modification times of remote files. |
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1354 When you do C-x C-f /user@host:/path/file RET and edit the file, |
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1355 and someone else modifies the file, you will be prompted to revert |
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1356 the buffer, just like for the local files. |
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1357 |
30829 | 1358 ** The buffer menu (C-x C-b) no longer lists the *Buffer List* buffer. |
1359 | |
31279
90089bb22edf
Mark as documented in the manual the effect of prefix argument
Eli Zaretskii <eliz@gnu.org>
parents:
31248
diff
changeset
|
1360 +++ |
31231 | 1361 ** When invoked with a prefix argument, the command `list-abbrevs' now |
1362 displays local abbrevs, only. | |
1363 | |
31388 | 1364 ** VC Changes |
1365 | |
1366 VC has been overhauled internally. It is now modular, making it | |
1367 easier to plug-in arbitrary version control backends. (See Lisp | |
1368 Changes for details on the new structure.) As a result, the mechanism | |
1369 to enable and disable support for particular version systems has | |
1370 changed: everything is now controlled by the new variable | |
1371 `vc-handled-backends'. Its value is a list of atoms that identify | |
1372 version systems; the default is '(RCS CVS SCCS). When finding a file, | |
1373 each of the backends in that list is tried in order to see whether the | |
1374 file is registered in that backend. | |
1375 | |
1376 When registering a new file, VC first tries each of the listed | |
1377 backends to see if any of them considers itself "responsible" for the | |
1378 directory of the file (e.g. because a corresponding subdirectory for | |
1379 master files exists). If none of the backends is responsible, then | |
1380 the first backend in the list that could register the file is chosen. | |
1381 As a consequence, the variable `vc-default-back-end' is now obsolete. | |
1382 | |
1383 The old variable `vc-master-templates' is also obsolete, although VC | |
1384 still supports it for backward compatibility. To define templates for | |
1385 RCS or SCCS, you should rather use the new variables | |
1386 vc-{rcs,sccs}-master-templates. (There is no such feature under CVS | |
1387 where it doesn't make sense.) | |
1388 | |
1389 The variables `vc-ignore-vc-files' and `vc-handle-cvs' are also | |
1390 obsolete now, you must set `vc-handled-backends' to nil or exclude | |
1391 `CVS' from the list, respectively, to achieve their effect now. | |
1392 | |
1393 *** General Changes | |
1394 | |
1395 The variable `vc-checkout-carefully' is obsolete: the corresponding | |
1396 checks are always done now. | |
1397 | |
31858
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
1398 VC Dired buffers are now kept up-to-date during all version control |
31388 | 1399 operations. |
1400 | |
1401 *** Changes for CVS | |
1402 | |
1403 There is a new user option, `vc-cvs-stay-local'. If it is `t' (the | |
1404 default), then VC avoids network queries for files registered in | |
1405 remote repositories. The state of such files is then only determined | |
1406 by heuristics and past information. `vc-cvs-stay-local' can also be a | |
1407 regexp to match against repository hostnames; only files from hosts | |
1408 that match it are treated locally. If the variable is nil, then VC | |
1409 queries the repository just as often as it does for local files. | |
1410 | |
1411 If `vc-cvs-stay-local' is on, and there have been changes in the | |
1412 repository, VC notifies you about it when you actually try to commit. | |
1413 If you want to check for updates from the repository without trying to | |
1414 commit, you can either use C-u C-x v m to perform an update on the | |
1415 current file, or you can use C-x v r RET to get an update for an | |
1416 entire directory tree. | |
1417 | |
1418 The new user option `vc-cvs-use-edit' indicates whether VC should call | |
1419 "cvs edit" to make files writeable; it defaults to `t'. (This option | |
1420 is only meaningful if the CVSREAD variable is set, or if files are | |
1421 "watched" by other developers.) | |
1422 | |
1423 *** Lisp Changes in VC | |
1424 | |
1425 VC has been restructured internally to make it modular. You can now | |
1426 add support for arbitrary version control backends by writing a | |
1427 library that provides a certain set of backend-specific functions, and | |
1428 then telling VC to use that library. For example, to add support for | |
1429 a version system named FOO, you write a library named vc-foo.el, which | |
1430 provides a number of functions vc-foo-... (see commentary at the end | |
1431 of vc.el for a detailed list of them). To make VC use that library, | |
1432 you need to put it somewhere into Emacs' load path and add the atom | |
1433 `FOO' to the list `vc-handled-backends'. | |
1434 | |
25853 | 1435 ** New modes and packages |
1436 | |
31019
2ec8d313faf7
Mark timeclock.el as being described in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31009
diff
changeset
|
1437 +++ |
30781 | 1438 *** The new package timeclock.el is a mode is for keeping track of time |
1439 intervals. You can use it for whatever purpose you like, but the | |
1440 typical scenario is to keep track of how much time you spend working | |
1441 on certain projects. | |
1442 | |
31071
93f2d24e3942
Mark hi-lock.el as being documented in the manual.
Eli Zaretskii <eliz@gnu.org>
parents:
31070
diff
changeset
|
1443 +++ |
30781 | 1444 *** The new package hi-lock.el, text matching interactively entered |
30789 | 1445 regexp's can be highlighted. For example, |
1446 | |
1447 M-x highlight-regexp RET clearly RET RET | |
30565 | 1448 |
1449 will highlight all occurrences of `clearly' using a yellow background | |
1450 face. New occurrences of `clearly' will be highlighted as they are | |
1451 typed. `M-x unhighlight-regexp RET' will remove the highlighting. | |
1452 Any existing face can be used for highlighting and a set of | |
1453 appropriate faces is provided. The regexps can be written into the | |
1454 current buffer in a form that will be recognized the next time the | |
1455 corresponding file is read. | |
1456 | |
31007 | 1457 +++ |
30789 | 1458 *** The new package zone.el plays games with Emacs' display when |
30565 | 1459 Emacs is idle. |
1460 | |
30319 | 1461 *** The new package xml.el provides a simple but generic XML |
1462 parser. It doesn't parse the DTDs however. | |
1463 | |
29218
e956cc90f6c0
newcomment and the change of binding for M-;
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
29162
diff
changeset
|
1464 *** The comment operations are now provided by the newcomment.el |
e956cc90f6c0
newcomment and the change of binding for M-;
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
29162
diff
changeset
|
1465 package which allows different styles of comment-region and should |
e956cc90f6c0
newcomment and the change of binding for M-;
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
29162
diff
changeset
|
1466 be more robust while offering the same functionality. |
e956cc90f6c0
newcomment and the change of binding for M-;
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
29162
diff
changeset
|
1467 |
31007 | 1468 +++ |
28879 | 1469 *** The Ebrowse package implements a C++ class browser and tags |
1470 facilities tailored for use with C++. It is documented in a | |
1471 separate Texinfo file. | |
1472 | |
31007 | 1473 +++ |
1474 *** The PCL-CVS package available by either running M-x cvs-examine or | |
1475 by visiting a CVS administrative directory (with a prefix argument) | |
1476 provides an alternative interface to VC-dired for CVS. It comes with | |
1477 `log-view-mode' to view RCS and SCCS logs and `log-edit-mode' used to | |
1478 enter checkin log messages. | |
1479 | |
1480 +++ | |
28834 | 1481 *** The new package called `woman' allows to browse Unix man pages |
1482 without invoking external programs. | |
1483 | |
1484 The command `M-x woman' formats manual pages entirely in Emacs Lisp | |
1485 and then displays them, like `M-x manual-entry' does. Unlike | |
1486 `manual-entry', `woman' does not invoke any external programs, so it | |
1487 is useful on systems such as MS-DOS/MS-Windows where the `man' and | |
28955
6cfd3ddf0911
Correct a typo in description of `woman.el'.
Eli Zaretskii <eliz@gnu.org>
parents:
28946
diff
changeset
|
1488 Groff or `troff' commands are not readily available. |
28834 | 1489 |
1490 The command `M-x woman-find-file' asks for the file name of a man | |
1491 page, then formats and displays it like `M-x woman' does. | |
1492 | |
31073
f35042c35352
Mark re-build as being documented.
Eli Zaretskii <eliz@gnu.org>
parents:
31071
diff
changeset
|
1493 +++ |
28098 | 1494 *** The new command M-x re-builder offers a convenient interface for |
1495 authoring regular expressions with immediate visual feedback. | |
1496 | |
1497 The buffer from which the command was called becomes the target for | |
1498 the regexp editor popping up in a separate window. Matching text in | |
1499 the target buffer is immediately color marked during the editing. | |
1500 Each sub-expression of the regexp will show up in a different face so | |
1501 even complex regexps can be edited and verified on target data in a | |
1502 single step. | |
1503 | |
1504 On displays not supporting faces the matches instead blink like | |
1505 matching parens to make them stand out. On such a setup you will | |
1506 probably also want to use the sub-expression mode when the regexp | |
1507 contains such to get feedback about their respective limits. | |
1508 | |
31007 | 1509 +++ |
27644 | 1510 *** glasses-mode is a minor mode that makes |
1511 unreadableIdentifiersLikeThis readable. It works as glasses, without | |
1512 actually modifying content of a buffer. | |
1513 | |
27498 | 1514 *** The package ebnf2ps translates an EBNF to a syntactic chart in |
1515 PostScript. | |
1516 | |
1517 Currently accepts ad-hoc EBNF, ISO EBNF and Bison/Yacc. | |
1518 | |
1519 The ad-hoc default EBNF syntax has the following elements: | |
1520 | |
1521 ; comment (until end of line) | |
1522 A non-terminal | |
1523 "C" terminal | |
1524 ?C? special | |
1525 $A default non-terminal | |
1526 $"C" default terminal | |
1527 $?C? default special | |
1528 A = B. production (A is the header and B the body) | |
1529 C D sequence (C occurs before D) | |
1530 C | D alternative (C or D occurs) | |
1531 A - B exception (A excluding B, B without any non-terminal) | |
1532 n * A repetition (A repeats n (integer) times) | |
1533 (C) group (expression C is grouped together) | |
1534 [C] optional (C may or not occurs) | |
1535 C+ one or more occurrences of C | |
1536 {C}+ one or more occurrences of C | |
1537 {C}* zero or more occurrences of C | |
1538 {C} zero or more occurrences of C | |
1539 C / D equivalent to: C {D C}* | |
1540 {C || D}+ equivalent to: C {D C}* | |
1541 {C || D}* equivalent to: [C {D C}*] | |
1542 {C || D} equivalent to: [C {D C}*] | |
1543 | |
1544 Please, see ebnf2ps documentation for EBNF syntax and how to use it. | |
1545 | |
27328 | 1546 *** The package align.el will align columns within a region, using M-x |
1547 align. Its mode-specific rules, based on regular expressions, | |
1548 determine where the columns should be split. In C and C++, for | |
1549 example, it will align variable names in declaration lists, or the | |
1550 equal signs of assignments. | |
1551 | |
31007 | 1552 +++ |
27266
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
1553 *** `paragraph-indent-minor-mode' is a new minor mode supporting |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
1554 paragraphs in the same style as `paragraph-indent-text-mode'. |
8ce11c7a7fcb
read-mail-command, outline mode changes, change-log-merge,
Dave Love <fx@gnu.org>
parents:
27200
diff
changeset
|
1555 |
31007 | 1556 +++ |
27016 | 1557 *** bs.el is a new package for buffer selection similar to |
1558 list-buffers or electric-buffer-list. Use M-x bs-show to display a | |
1559 buffer menu with this package. You can use M-x bs-customize to | |
1560 customize the package. | |
1561 | |
29696 | 1562 *** find-lisp.el is a package emulating the Unix find command in Lisp. |
1563 | |
27733 | 1564 *** calculator.el is a small calculator package that is intended to |
1565 replace desktop calculators such as xcalc and calc.exe. Actually, it | |
1566 is not too small - it has more features than most desktop calculators, | |
1567 and can be customized easily to get many more functions. It should | |
1568 not be confused with "calc" which is a much bigger mathematical tool | |
1569 which answers different needs. | |
1570 | |
31007 | 1571 +++ |
26964
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1572 *** The minor modes cwarn-mode and global-cwarn-mode highlights |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1573 suspicious C and C++ constructions. Currently, assignments inside |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1574 expressions, semicolon following `if', `for' and `while' (except, of |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1575 course, after a `do .. while' statement), and C++ functions with |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1576 reference parameters are recognized. The modes require font-lock mode |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1577 to be enabled. |
2939daf50656
Font-lock changes by Anders Lindgren.
Gerd Moellmann <gerd@gnu.org>
parents:
26933
diff
changeset
|
1578 |
31007 | 1579 +++ |
27094
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
1580 *** smerge-mode.el provides `smerge-mode', a simple minor-mode for files |
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
1581 containing diff3-style conflict markers, such as generated by RCS. |
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
1582 |
31007 | 1583 +++ |
25853 | 1584 *** 5x5.el is a simple puzzle game. |
1585 | |
31007 | 1586 +++ |
25853 | 1587 *** hl-line.el provides a minor mode to highlight the current line. |
1588 | |
1589 *** ansi-color.el translates ANSI terminal escapes into text-properties. | |
1590 | |
31936 | 1591 Please note: if `ansi-color-for-shell-mode' and |
1592 `global-font-lock-mode' are non-nil, loading ansi-color.el will | |
1593 disable font-lock and add `ansi-color-apply' to | |
1594 `comint-preoutput-filter-functions' for all shell-mode buffers. This | |
1595 displays the output of "ls --color=yes" using the correct foreground | |
1596 and background colors. | |
1597 | |
25853 | 1598 *** delphi.el provides a major mode for editing the Delphi (Object |
1599 Pascal) language. | |
1600 | |
31156 | 1601 +++ |
25853 | 1602 *** quickurl.el provides a simple method of inserting a URL based on |
1603 the text at point. | |
1604 | |
1605 *** sql.el provides an interface to SQL data bases. | |
1606 | |
31007 | 1607 +++ |
25862 | 1608 *** fortune.el uses the fortune program to create mail/news signatures. |
1609 | |
25853 | 1610 *** whitespace.el ??? |
1611 | |
25992 | 1612 *** PostScript mode (ps-mode) is a new major mode for editing PostScript |
1613 files. It offers: interaction with a PostScript interpreter, including | |
1614 (very basic) error handling; fontification, easily customizable for | |
1615 interpreter messages; auto-indentation; insertion of EPSF templates and | |
1616 often used code snippets; viewing of BoundingBox; commenting out / | |
1617 uncommenting regions; conversion of 8bit characters to PostScript octal | |
1618 codes. All functionality is accessible through a menu. | |
1619 | |
1620 *** delim-col helps to prettify columns in a text region or rectangle. | |
1621 | |
1622 Here is an example of columns: | |
1623 | |
1624 horse apple bus | |
1625 dog pineapple car EXTRA | |
1626 porcupine strawberry airplane | |
1627 | |
1628 Doing the following settings: | |
1629 | |
1630 (setq delimit-columns-str-before "[ ") | |
1631 (setq delimit-columns-str-after " ]") | |
1632 (setq delimit-columns-str-separator ", ") | |
1633 (setq delimit-columns-separator "\t") | |
1634 | |
1635 | |
1636 Selecting the lines above and typing: | |
1637 | |
1638 M-x delimit-columns-region | |
1639 | |
1640 It results: | |
1641 | |
1642 [ horse , apple , bus , ] | |
1643 [ dog , pineapple , car , EXTRA ] | |
1644 [ porcupine, strawberry, airplane, ] | |
1645 | |
1646 delim-col has the following options: | |
1647 | |
1648 delimit-columns-str-before Specify a string to be inserted | |
1649 before all columns. | |
1650 | |
1651 delimit-columns-str-separator Specify a string to be inserted | |
1652 between each column. | |
1653 | |
1654 delimit-columns-str-after Specify a string to be inserted | |
1655 after all columns. | |
1656 | |
1657 delimit-columns-separator Specify a regexp which separates | |
1658 each column. | |
1659 | |
1660 delim-col has the following commands: | |
1661 | |
1662 delimit-columns-region Prettify all columns in a text region. | |
1663 delimit-columns-rectangle Prettify all columns in a text rectangle. | |
1664 | |
31007 | 1665 +++ |
26030
c5e8559a53cb
Add description of recentf.
Gerd Moellmann <gerd@gnu.org>
parents:
26016
diff
changeset
|
1666 *** The package recentf.el maintains a menu for visiting files that |
30319 | 1667 were operated on recently. |
1668 | |
1669 M-x recentf-mode RET toggles recentf mode. | |
1670 | |
1671 M-x customize-variable RET recentf-mode RET can be used to enable | |
1672 recentf at Emacs startup. | |
1673 | |
1674 M-x customize-variable RET recentf-menu-filter RET to specify a menu | |
1675 filter function to change the menu appearance. For example, the recent | |
1676 file list can be displayed: | |
1677 | |
1678 - organized by major modes, directories or user defined rules. | |
1679 - sorted by file pathes, file names, ascending or descending. | |
1680 - showing pathes relative to the current default-directory | |
1681 | |
1682 The `recentf-filter-changer' menu filter function allows to | |
1683 dynamically change the menu appearance. | |
26030
c5e8559a53cb
Add description of recentf.
Gerd Moellmann <gerd@gnu.org>
parents:
26016
diff
changeset
|
1684 |
26149 | 1685 *** elide-head.el provides a mechanism for eliding boilerplate header |
1686 text. | |
1687 | |
31007 | 1688 +++ |
26924 | 1689 *** footnote.el provides `footnote-mode', a minor mode supporting use |
26786 | 1690 of footnotes. It is intended for use with Message mode, but isn't |
1691 specific to Message mode. | |
1692 | |
31007 | 1693 +++ |
26924 | 1694 *** diff-mode.el provides `diff-mode', a major mode for |
1695 viewing/editing context diffs (patches). It is selected for files | |
1696 with extension `.diff', `.diffs', `.patch' and `.rej'. | |
1697 | |
31007 | 1698 +++ |
27714
22a581e00fe4
Mention some new packages, extra configure options.
Dave Love <fx@gnu.org>
parents:
27693
diff
changeset
|
1699 *** EUDC, the Emacs Unified Directory Client, provides a common user |
22a581e00fe4
Mention some new packages, extra configure options.
Dave Love <fx@gnu.org>
parents:
27693
diff
changeset
|
1700 interface to access directory servers using different directory |
22a581e00fe4
Mention some new packages, extra configure options.
Dave Love <fx@gnu.org>
parents:
27693
diff
changeset
|
1701 protocols. It has a separate manual. |
22a581e00fe4
Mention some new packages, extra configure options.
Dave Love <fx@gnu.org>
parents:
27693
diff
changeset
|
1702 |
28132 | 1703 *** autoconf.el provides a major mode for editing configure.in files |
1704 for Autoconf, selected automatically. | |
1705 | |
31007 | 1706 +++ |
28710 | 1707 *** windmove.el provides moving between windows. |
28855
1be9a502caca
Cleaned some left over bogus conflict markers.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
28854
diff
changeset
|
1708 |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1709 *** crm.el provides a facility to read multiple strings from the |
28710 | 1710 minibuffer with completion. |
27714
22a581e00fe4
Mention some new packages, extra configure options.
Dave Love <fx@gnu.org>
parents:
27693
diff
changeset
|
1711 |
28883 | 1712 *** todo-mode.el provides management of TODO lists and integration |
1713 with the diary features. | |
1714 | |
28912 | 1715 *** autoarg.el provides a feature reported from Twenex Emacs whereby |
1716 numeric keys supply prefix args rather than self inserting. | |
1717 | |
29814 | 1718 *** The function `turn-off-auto-fill' unconditionally turns off Auto |
1719 Fill mode. | |
1720 | |
25853 | 1721 ** Withdrawn packages |
1722 | |
1723 *** mldrag.el has been removed. mouse.el provides the same | |
1724 functionality with aliases for the mldrag functions. | |
26133 | 1725 |
27369 | 1726 *** eval-reg.el has been obsoleted by changes to edebug.el and removed. |
1727 | |
1728 *** ph.el has been obsoleted by EUDC and removed. | |
29102 | 1729 |
1730 | |
1731 * Lisp changes made after edition 2.6 of the Emacs Lisp Manual, | |
1732 (Display-related features are described in a page of their own below.) | |
1733 | |
31636 | 1734 ** In image specifications, `:heuristic-mask' has been replaced |
1735 with the more general `:mask' property. | |
1736 | |
31728 | 1737 ** Image specifications accept more `:algorithm's. |
1738 | |
31561 | 1739 ** A `?' can be used in a symbol name without escaping it with a |
1740 backslash. | |
1741 | |
31007 | 1742 +++ |
1743 ** Reading from the mini-buffer now reads from standard input if Emacs | |
1744 is running in batch mode. For example, | |
1745 | |
1746 (message "%s" (read t)) | |
1747 | |
1748 will read a Lisp expression from standard input and print the result | |
1749 to standard output. | |
1750 | |
1751 +++ | |
1752 ** The argument of `down-list', `backward-up-list', `up-list', | |
1753 `kill-sexp', `backward-kill-sexp' and `mark-sexp' is now optional. | |
1754 | |
30564 | 1755 ** If `display-buffer-reuse-frames' is set, function `display-buffer' |
1756 will raise frames displaying a buffer, instead of creating a new | |
1757 frame or window. | |
1758 | |
31156 | 1759 +++ |
30516 | 1760 ** Two new functions for removing elements from lists/sequences |
1761 were added | |
1762 | |
1763 - Function: remove ELT SEQ | |
1764 | |
1765 Return a copy of SEQ with all occurences of ELT removed. SEQ must be | |
1766 a list, vector, or string. The comparison is done with `equal'. | |
1767 | |
1768 - Function: remq ELT LIST | |
1769 | |
1770 Return a copy of LIST with all occurences of ELT removed. The | |
1771 comparison is done with `eq'. | |
1772 | |
1773 ** The function `delete' now also works with vectors and strings. | |
30511 | 1774 |
30502 | 1775 ** The meaning of the `:weakness WEAK' argument of make-hash-table |
1776 has been changed. | |
1777 | |
31007 | 1778 +++ |
30357 | 1779 ** Function `aset' stores any multibyte character in any string |
1780 without signaling "Attempt to change char length of a string". It may | |
1781 convert a unibyte string to multibyte if necessary. | |
1782 | |
30219 | 1783 ** The value of the `help-echo' text property is called as a function |
1784 or evaluated, if it is not a string already, to obtain a help string. | |
30203 | 1785 |
30158
84d54b049d67
make-obsolete, plist-member changes
Dave Love <fx@gnu.org>
parents:
30155
diff
changeset
|
1786 ** Function `make-obsolete' now has an optional arg to say when the |
84d54b049d67
make-obsolete, plist-member changes
Dave Love <fx@gnu.org>
parents:
30155
diff
changeset
|
1787 function was declared obsolete. |
84d54b049d67
make-obsolete, plist-member changes
Dave Love <fx@gnu.org>
parents:
30155
diff
changeset
|
1788 |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1789 ** Function `plist-member' is renamed from `widget-plist-member' (which is |
30158
84d54b049d67
make-obsolete, plist-member changes
Dave Love <fx@gnu.org>
parents:
30155
diff
changeset
|
1790 retained as an alias). |
84d54b049d67
make-obsolete, plist-member changes
Dave Love <fx@gnu.org>
parents:
30155
diff
changeset
|
1791 |
30068
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1792 ** Easy-menu's :filter now works as in XEmacs. |
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1793 It takes the unconverted (i.e. XEmacs) form of the menu and the result |
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1794 is automatically converted to Emacs' form. |
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1795 |
30038 | 1796 ** The new function `window-list' has been defined |
1797 | |
1798 - Function: window-list &optional WINDOW MINIBUF ALL-FRAMES | |
1799 | |
1800 Return a list of windows in canonical order. The parameters WINDOW, | |
1801 MINIBUF and ALL-FRAMES are defined like for `next-window'. | |
1802 | |
30006 | 1803 ** There's a new function `some-window' defined as follows |
1804 | |
1805 - Function: some-window PREDICATE &optional MINIBUF ALL-FRAMES DEFAULT | |
1806 | |
1807 Return a window satisfying PREDICATE. | |
1808 | |
1809 This function cycles through all visible windows using `walk-windows', | |
1810 calling PREDICATE on each one. PREDICATE is called with a window as | |
1811 argument. The first window for which PREDICATE returns a non-nil | |
1812 value is returned. If no window satisfies PREDICATE, DEFAULT is | |
1813 returned. | |
1814 | |
1815 Optional second arg MINIBUF t means count the minibuffer window even | |
1816 if not active. MINIBUF nil or omitted means count the minibuffer iff | |
1817 it is active. MINIBUF neither t nor nil means not to count the | |
1818 minibuffer even if it is active. | |
1819 | |
1820 Several frames may share a single minibuffer; if the minibuffer | |
1821 counts, all windows on all frames that share that minibuffer count | |
1822 too. Therefore, if you are using a separate minibuffer frame | |
1823 and the minibuffer is active and MINIBUF says it counts, | |
1824 `walk-windows' includes the windows in the frame from which you | |
1825 entered the minibuffer, as well as the minibuffer window. | |
1826 | |
1827 ALL-FRAMES is the optional third argument. | |
1828 ALL-FRAMES nil or omitted means cycle within the frames as specified above. | |
1829 ALL-FRAMES = `visible' means include windows on all visible frames. | |
1830 ALL-FRAMES = 0 means include windows on all visible and iconified frames. | |
1831 ALL-FRAMES = t means include windows on all frames including invisible frames. | |
1832 If ALL-FRAMES is a frame, it means include windows on that frame. | |
1833 Anything else means restrict to the selected frame. | |
1834 | |
30564 | 1835 ** The function `single-key-description' now encloses function key and |
1836 event names in angle brackets. When called with a second optional | |
1837 argument non-nil, angle brackets won't be printed. | |
29657 | 1838 |
29637 | 1839 ** If the variable `message-truncate-lines' is bound to t around a |
1840 call to `message', the echo area will not be resized to display that | |
30290 | 1841 message; it will be truncated instead, as it was done in 20.x. |
1842 Default value is nil. | |
29637 | 1843 |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1844 ** The user option `line-number-display-limit' can now be set to nil, |
29633 | 1845 meaning no limit. |
1846 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1847 ** `select-safe-coding-system' now also checks the most preferred |
29509 | 1848 coding-system if buffer-file-coding-system is `undecided' and |
1849 DEFAULT-CODING-SYSTEM is not specified, | |
1850 | |
29286 | 1851 ** The function `subr-arity' provides information on the argument list |
29238 | 1852 of a primitive. |
1853 | |
29286 | 1854 ** The text property `keymap' specifies a key map which overrides the |
1855 buffer's local map and the map specified by the `local-map' property. | |
1856 This is probably what most current uses of `local-map' want, rather | |
1857 than replacing the local map. | |
1858 | |
29381
580f03a746d8
find-image, {before,after}-change-function
Dave Love <fx@gnu.org>
parents:
29286
diff
changeset
|
1859 ** The obsolete variables before-change-function and |
580f03a746d8
find-image, {before,after}-change-function
Dave Love <fx@gnu.org>
parents:
29286
diff
changeset
|
1860 after-change-function are no longer acted upon and have been removed. |
29498 | 1861 |
1862 ** The function `apropos-mode' runs the hook `apropos-mode-hook'. | |
1863 | |
31156 | 1864 +++ |
30339
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
1865 ** `concat' no longer accepts individual integer arguments, as |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
1866 promised long ago. |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
1867 |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
1868 ** The new function `float-time' returns the current time as a float. |
25853 | 1869 |
1870 * Lisp changes in Emacs 21.1 (see following page for display-related features) | |
1871 | |
1872 Note that +++ before an item means the Lisp manual has been updated. | |
1873 --- means that I have decided it does not need to be in the Lisp manual. | |
1874 When you add a new item, please add it without either +++ or --- | |
1875 so I will know I still need to look at it -- rms. | |
1876 | |
30933
3a89352a7dab
Document save-restriction fix.
Miles Bader <miles@gnu.org>
parents:
30930
diff
changeset
|
1877 *** The special form `save-restriction' now works correctly even if the |
3a89352a7dab
Document save-restriction fix.
Miles Bader <miles@gnu.org>
parents:
30930
diff
changeset
|
1878 buffer is widened inside the save-restriction and changes made outside |
3a89352a7dab
Document save-restriction fix.
Miles Bader <miles@gnu.org>
parents:
30930
diff
changeset
|
1879 the original restriction. Previously, doing this would cause the saved |
3a89352a7dab
Document save-restriction fix.
Miles Bader <miles@gnu.org>
parents:
30930
diff
changeset
|
1880 restriction to be restored incorrectly. |
3a89352a7dab
Document save-restriction fix.
Miles Bader <miles@gnu.org>
parents:
30930
diff
changeset
|
1881 |
29506 | 1882 *** The functions `find-charset-region' and `find-charset-string' include |
1883 `eight-bit-control' and/or `eight-bit-graphic' in the returned list | |
1884 when it finds 8-bit characters. Previously, it included `ascii' in a | |
1885 multibyte buffer and `unknown' in a unibyte buffer. | |
1886 | |
1887 *** The functions `set-buffer-modified', `string-as-multibyte' and | |
1888 `string-as-unibyte' change the byte sequence of a buffer if it | |
1889 contains a character from the `eight-bit-control' character set. | |
1890 | |
1891 *** The handling of multibyte sequences in a multibyte buffer is | |
1892 changed. Previously, a byte sequence matching the pattern | |
1893 [\200-\237][\240-\377]+ was interpreted as a single character | |
1894 regardless of the length of the trailing bytes [\240-\377]+. Thus, if | |
1895 the sequence was longer than what the leading byte indicated, the | |
1896 extra trailing bytes were ignored by Lisp functions. Now such extra | |
1897 bytes are independent 8-bit characters belonging to the charset | |
1898 eight-bit-graphic. | |
1899 | |
1900 ** Fontsets are now implemented using char-tables. | |
1901 | |
1902 A fontset can now be specified for for each independent character, for | |
1903 a group of characters or for a character set rather than just for a | |
1904 character set as previously. | |
1905 | |
1906 *** The arguments of the function `set-fontset-font' are changed. | |
1907 They are NAME, CHARACTER, FONTNAME, and optional FRAME. The function | |
1908 modifies fontset NAME to use FONTNAME for CHARACTER. | |
1909 | |
1910 CHARACTER may be a cons (FROM . TO), where FROM and TO are non-generic | |
1911 characters. In that case FONTNAME is used for all characters in the | |
1912 range FROM and TO (inclusive). CHARACTER may be a charset. In that | |
1913 case FONTNAME is used for all character in the charset. | |
1914 | |
1915 FONTNAME may be a cons (FAMILY . REGISTRY), where FAMILY is the family | |
1916 name of a font and REGSITRY is a registry name of a font. | |
1917 | |
1918 *** Variable x-charset-registry has been deleted. The default charset | |
1919 registries of character sets are set in the default fontset | |
1920 "fontset-default". | |
1921 | |
1922 *** The function `create-fontset-from-fontset-spec' ignores the second | |
1923 argument STYLE-VARIANT. It never creates style-variant fontsets. | |
1924 | |
1925 ** The method of composing characters is changed. Now character | |
1926 composition is done by a special text property `composition' in | |
1927 buffers and strings. | |
1928 | |
1929 *** Charset composition is deleted. Emacs never creates a `composite | |
1930 character' which is an independent character with a unique character | |
1931 code. Thus the following functions handling `composite characters' | |
1932 have been deleted: composite-char-component, | |
1933 composite-char-component-count, composite-char-composition-rule, | |
1934 composite-char-composition-rule and decompose-composite-char delete. | |
1935 The variables leading-code-composition and min-composite-char have | |
1936 also been deleted. | |
1937 | |
1938 *** Three more glyph reference points are added. They can be used to | |
1939 specify a composition rule. See the documentation of the variable | |
1940 `reference-point-alist' for more detail. | |
1941 | |
1942 *** The function `compose-region' takes new arguments COMPONENTS and | |
1943 MODIFICATION-FUNC. With COMPONENTS, you can specify not only a | |
1944 composition rule but also characters to be composed. Such characters | |
1945 may differ between buffer and string text. | |
1946 | |
1947 *** The function `compose-string' takes new arguments START, END, | |
1948 COMPONENTS, and MODIFICATION-FUNC. | |
1949 | |
1950 *** The function `compose-string' puts text property `composition' | |
1951 directly on the argument STRING instead of returning a new string. | |
1952 Likewise, the function `decompose-string' just removes text property | |
1953 `composition' from STRING. | |
1954 | |
1955 *** The new function `find-composition' returns information about | |
1956 a composition at a specified position in a buffer or a string. | |
1957 | |
1958 *** The function `decompose-composite-char' is now labeled as | |
1959 obsolete. | |
1960 | |
1961 ** The new character set `mule-unicode-0100-24ff' is introduced for | |
1962 Unicode characters of the range U+0100..U+24FF. Currently, this | |
1963 character set is not used. | |
1964 | |
1965 ** The new character sets `japanese-jisx0213-1' and | |
1966 `japanese-jisx0213-2' are introduced for the new Japanese standard JIS | |
1967 X 0213 Plane 1 and Plane 2. | |
1968 | |
1969 +++ | |
1970 ** The new character sets `eight-bit-control' and `eight-bit-graphic' | |
1971 are introduced for 8-bit characters in the ranges 0x80..0x9F and | |
30068
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1972 0xA0..0xFF respectively. |
29506 | 1973 |
28883 | 1974 +++ |
28847 | 1975 ** If the APPEND argument of `write-region' is an integer, it seeks to |
1976 that offset in the file before writing. | |
1977 | |
30068
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1978 ** The function `add-minor-mode' has been added for convenience and |
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
1979 compatibility with XEmacs (and is used internally by define-minor-mode). |
28724 | 1980 |
28710 | 1981 ** The function `shell-command' now sets the default directory of the |
1982 `*Shell Command Output*' buffer to the default directory of the buffer | |
1983 from which the command was issued. | |
1984 | |
1985 ** The functions `query-replace', `query-replace-regexp', | |
1986 `query-replace-regexp-eval' `map-query-replace-regexp', | |
1987 `replace-string', `replace-regexp', and `perform-replace' take two | |
1988 additional optional arguments START and END that specify the region to | |
1989 operate on. | |
1990 | |
28658 | 1991 ** The new function `count-screen-lines' is a more flexible alternative |
1992 to `window-buffer-height'. | |
1993 | |
1994 - Function: count-screen-lines &optional BEG END COUNT-FINAL-NEWLINE WINDOW | |
1995 | |
1996 Return the number of screen lines in the region between BEG and END. | |
1997 The number of screen lines may be different from the number of actual | |
1998 lines, due to line breaking, display table, etc. | |
1999 | |
2000 Optional arguments BEG and END default to `point-min' and `point-max' | |
2001 respectively. | |
2002 | |
2003 If region ends with a newline, ignore it unless optinal third argument | |
2004 COUNT-FINAL-NEWLINE is non-nil. | |
2005 | |
2006 The optional fourth argument WINDOW specifies the window used for | |
2007 obtaining parameters such as width, horizontal scrolling, and so | |
2008 on. The default is to use the selected window's parameters. | |
2009 | |
2010 Like `vertical-motion', `count-screen-lines' always uses the current | |
2011 buffer, regardless of which buffer is displayed in WINDOW. This makes | |
2012 possible to use `count-screen-lines' in any buffer, whether or not it | |
2013 is currently displayed in some window. | |
2014 | |
28556 | 2015 ** The new function `mapc' is like `mapcar' but doesn't collect the |
2016 argument function's results. | |
2017 | |
28496 | 2018 ** The functions base64-decode-region and base64-decode-string now |
2019 signal an error instead of returning nil if decoding fails. | |
2020 | |
28492 | 2021 ** The function sendmail-user-agent-compose now recognizes a `body' |
31859 | 2022 header in the list of headers passed to it. |
28492 | 2023 |
2024 ** The new function member-ignore-case works like `member', but | |
2025 ignores differences in case and text representation. | |
2026 | |
2027 ** The buffer-local variable cursor-type can be used to specify the | |
28323 | 2028 cursor to use in windows displaying a buffer. Values are interpreted |
2029 as follows: | |
2030 | |
2031 t use the cursor specified for the frame (default) | |
2032 nil don't display a cursor | |
2033 `bar' display a bar cursor with default width | |
2034 (bar . WIDTH) display a bar cursor with width WIDTH | |
2035 others display a box cursor. | |
2036 | |
28303 | 2037 ** The variable open-paren-in-column-0-is-defun-start controls whether |
2038 an open parenthesis in column 0 is considered to be the start of a | |
2039 defun. If set, the default, it is considered a defun start. If not | |
2040 set, an open parenthesis in column 0 has no special meaning. | |
2041 | |
28194 | 2042 ** The new function `string-to-syntax' can be used to translate syntax |
28854
a5c81109bc31
Mention PCL-CVS.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
28847
diff
changeset
|
2043 specifications in string form as accepted by `modify-syntax-entry' to |
28194 | 2044 the cons-cell form that is used for the values of the `syntax-table' |
2045 text property, and in `font-lock-syntactic-keywords'. | |
2046 | |
2047 Example: | |
2048 | |
2049 (string-to-syntax "()") | |
2050 => (4 . 41) | |
2051 | |
28166 | 2052 ** Emacs' reader supports CL read syntax for integers in bases |
2053 other than 10. | |
2054 | |
2055 *** `#BINTEGER' or `#bINTEGER' reads INTEGER in binary (radix 2). | |
2056 INTEGER optionally contains a sign. | |
2057 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
2058 #b1111 |
28166 | 2059 => 15 |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
2060 #b-1111 |
28166 | 2061 => -15 |
2062 | |
2063 *** `#OINTEGER' or `#oINTEGER' reads INTEGER in octal (radix 8). | |
2064 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
2065 #o666 |
28166 | 2066 => 438 |
2067 | |
2068 *** `#XINTEGER' or `#xINTEGER' reads INTEGER in hexadecimal (radix 16). | |
2069 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
2070 #xbeef |
28166 | 2071 => 48815 |
2072 | |
2073 *** `#RADIXrINTEGER' reads INTEGER in radix RADIX, 2 <= RADIX <= 36. | |
2074 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
2075 #2R-111 |
28166 | 2076 => -7 |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
2077 #25rah |
28166 | 2078 => 267 |
2079 | |
28335 | 2080 ** The function `documentation-property' now evaluates the value of |
30068
fd80ab818a0c
Fix various typos.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
30056
diff
changeset
|
2081 the given property to obtain a string if it doesn't refer to etc/DOC |
28037 | 2082 and isn't a string. |
2083 | |
28335 | 2084 ** If called for a symbol, the function `documentation' now looks for |
2085 a `function-documentation' property of that symbol. If it has a non-nil | |
2086 value, the documentation is taken from that value. If the value is | |
2087 not a string, it is evaluated to obtain a string. | |
2088 | |
27881
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2089 +++ |
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2090 ** The last argument of `define-key-after' defaults to t for convenience. |
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2091 |
28149 | 2092 ** The new function `replace-regexp-in-string' replaces all matches |
27881
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2093 for a regexp in a string. |
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2094 |
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2095 ** `mouse-position' now runs the abnormal hook |
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2096 `mouse-position-function'. |
f54471f7b913
replace-regexps-in-string, mouse-position-function, define-key-after change
Dave Love <fx@gnu.org>
parents:
27847
diff
changeset
|
2097 |
27827 | 2098 ** The function string-to-number now returns a float for numbers |
2099 that don't fit into a Lisp integer. | |
2100 | |
27820 | 2101 ** The variable keyword-symbols-constants-flag has been removed. |
2102 Keywords are now always considered constants. | |
2103 | |
27770 | 2104 +++ |
2105 ** The new function `delete-and-extract-region' deletes text and | |
2106 returns it. | |
2107 | |
27276 | 2108 ** The function `clear-this-command-keys' now also clears the vector |
2109 returned by function `recent-keys'. | |
2110 | |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2111 +++ |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2112 ** Variables `beginning-of-defun-function' and `end-of-defun-function' |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2113 can be used to define handlers for the functions that find defuns. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2114 Major modes can define these locally instead of rebinding M-C-a |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2115 etc. if the normal conventions for defuns are not appropriate for the |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2116 mode. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2117 |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2118 +++ |
27094
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
2119 ** easy-mmode-define-minor-mode now takes an additional BODY argument |
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
2120 and is renamed `define-minor-mode'. |
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
2121 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2122 +++ |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2123 ** If an abbrev has a hook function which is a symbol, and that symbol |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2124 has a non-nil `no-self-insert' property, the return value of the hook |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2125 function specifies whether an expansion has been done or not. If it |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2126 returns nil, abbrev-expand also returns nil, meaning "no expansion has |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2127 been performed." |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2128 |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2129 When abbrev expansion is done by typing a self-inserting character, |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2130 and the abbrev has a hook with the `no-self-insert' property, and the |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2131 hook function returns non-nil meaning expansion has been done, |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2132 then the self-inserting character is not inserted. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2133 |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2134 +++ |
26737 | 2135 ** The function `intern-soft' now accepts a symbol as first argument. |
2136 In this case, that exact symbol is looked up in the specified obarray, | |
2137 and the function's value is nil if it is not found. | |
2138 | |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2139 +++ |
26467 | 2140 ** The new macro `with-syntax-table' can be used to evaluate forms |
2141 with the syntax table of the current buffer temporarily set to a | |
2142 specified table. | |
2143 | |
2144 (with-syntax-table TABLE &rest BODY) | |
2145 | |
2146 Evaluate BODY with syntax table of current buffer set to a copy of | |
26541
ce6bf7b42bc7
--with-syntax-table changed.
Gerd Moellmann <gerd@gnu.org>
parents:
26525
diff
changeset
|
2147 TABLE. The current syntax table is saved, BODY is evaluated, and the |
ce6bf7b42bc7
--with-syntax-table changed.
Gerd Moellmann <gerd@gnu.org>
parents:
26525
diff
changeset
|
2148 saved table is restored, even in case of an abnormal exit. Value is |
ce6bf7b42bc7
--with-syntax-table changed.
Gerd Moellmann <gerd@gnu.org>
parents:
26525
diff
changeset
|
2149 what BODY returns. |
26467 | 2150 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2151 +++ |
27693
d8bedafef8d5
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27644
diff
changeset
|
2152 ** Regular expressions now support intervals \{n,m\} as well as |
28063
f1b33463506d
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
28051
diff
changeset
|
2153 Perl's shy-groups \(?:...\) and non-greedy *? +? and ?? operators. |
27094
6500fd0a7d8e
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
27092
diff
changeset
|
2154 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2155 +++ |
26397
17d6fe2e2d0f
Removal of buffer argument of file-local-copy.
Gerd Moellmann <gerd@gnu.org>
parents:
26360
diff
changeset
|
2156 ** The optional argument BUFFER of function file-local-copy has been |
17d6fe2e2d0f
Removal of buffer argument of file-local-copy.
Gerd Moellmann <gerd@gnu.org>
parents:
26360
diff
changeset
|
2157 removed since it wasn't used by anything. |
17d6fe2e2d0f
Removal of buffer argument of file-local-copy.
Gerd Moellmann <gerd@gnu.org>
parents:
26360
diff
changeset
|
2158 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2159 +++ |
26360
5370b1c171ef
Change in file-locked-p argument.
Gerd Moellmann <gerd@gnu.org>
parents:
26359
diff
changeset
|
2160 ** The file name argument of function `file-locked-p' is now required |
5370b1c171ef
Change in file-locked-p argument.
Gerd Moellmann <gerd@gnu.org>
parents:
26359
diff
changeset
|
2161 instead of being optional. |
5370b1c171ef
Change in file-locked-p argument.
Gerd Moellmann <gerd@gnu.org>
parents:
26359
diff
changeset
|
2162 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2163 +++ |
26277
32e16b70ae15
New built-in error `text-read-only'.
Gerd Moellmann <gerd@gnu.org>
parents:
26271
diff
changeset
|
2164 ** The new built-in error `text-read-only' is signaled when trying to |
32e16b70ae15
New built-in error `text-read-only'.
Gerd Moellmann <gerd@gnu.org>
parents:
26271
diff
changeset
|
2165 modify read-only text. |
32e16b70ae15
New built-in error `text-read-only'.
Gerd Moellmann <gerd@gnu.org>
parents:
26271
diff
changeset
|
2166 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2167 +++ |
26140
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2168 ** New functions and variables for locales. |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2169 |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2170 The new variable `locale-coding-system' specifies how to encode and |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2171 decode strings passed to low-level message functions like strerror and |
26525
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2172 time functions like strftime. The new variables |
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2173 `system-messages-locale' and `system-time-locale' give the system |
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2174 locales to be used when invoking these two types of functions. |
26140
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2175 |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2176 The new function `set-locale-environment' sets the language |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2177 environment, preferred coding system, and locale coding system from |
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2178 the system locale as specified by the LC_ALL, LC_CTYPE, and LANG |
26525
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2179 environment variables. Normally, it is invoked during startup and need |
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2180 not be invoked thereafter. It uses the new variables |
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2181 `locale-language-names', `locale-charset-language-names', and |
4df5920724de
Rename messages-locale to system-messages-locale
Paul Eggert <eggert@twinsun.com>
parents:
26467
diff
changeset
|
2182 `locale-preferred-coding-systems' to make its decisions. |
26140
068f7ad41d40
Describe new functions and variables for locales.
Paul Eggert <eggert@twinsun.com>
parents:
26133
diff
changeset
|
2183 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2184 +++ |
26107
5bdae485eb03
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
26096
diff
changeset
|
2185 ** syntax tables now understand nested comments. |
5bdae485eb03
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
26096
diff
changeset
|
2186 To declare a comment syntax as allowing nesting, just add an `n' |
5bdae485eb03
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
26096
diff
changeset
|
2187 modifier to either of the characters of the comment end and the comment |
5bdae485eb03
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
26096
diff
changeset
|
2188 start sequences. |
5bdae485eb03
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
26096
diff
changeset
|
2189 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2190 +++ |
25910
918acea58309
Add section for change of pixmap-spec-p to bitmap-spec-p.
Gerd Moellmann <gerd@gnu.org>
parents:
25862
diff
changeset
|
2191 ** The function `pixmap-spec-p' has been renamed `bitmap-spec-p' |
918acea58309
Add section for change of pixmap-spec-p to bitmap-spec-p.
Gerd Moellmann <gerd@gnu.org>
parents:
25862
diff
changeset
|
2192 because `bitmap' is more in line with the usual X terminology. |
918acea58309
Add section for change of pixmap-spec-p to bitmap-spec-p.
Gerd Moellmann <gerd@gnu.org>
parents:
25862
diff
changeset
|
2193 |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2194 +++ |
25853 | 2195 ** New function `propertize' |
2196 | |
2197 The new function `propertize' can be used to conveniently construct | |
2198 strings with text properties. | |
2199 | |
2200 - Function: propertize STRING &rest PROPERTIES | |
2201 | |
2202 Value is a copy of STRING with text properties assigned as specified | |
2203 by PROPERTIES. PROPERTIES is a sequence of pairs PROPERTY VALUE, with | |
2204 PROPERTY being the name of a text property and VALUE being the | |
2205 specified value of that property. Example: | |
2206 | |
2207 (propertize "foo" 'face 'bold 'read-only t) | |
2208 | |
2209 +++ | |
2210 ** push and pop macros. | |
2211 | |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2212 Simple versions of the push and pop macros of Common Lisp |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2213 are now defined in Emacs Lisp. These macros allow only symbols |
25853 | 2214 as the place that holds the list to be changed. |
2215 | |
2216 (push NEWELT LISTNAME) add NEWELT to the front of LISTNAME's value. | |
2217 (pop LISTNAME) return first elt of LISTNAME, and remove it | |
2218 (thus altering the value of LISTNAME). | |
2219 | |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2220 ** New dolist and dotimes macros. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2221 |
27387
d0a7127b33e5
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27385
diff
changeset
|
2222 Simple versions of the dolist and dotimes macros of Common Lisp |
d0a7127b33e5
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27385
diff
changeset
|
2223 are now defined in Emacs Lisp. |
27385
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2224 |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2225 (dolist (VAR LIST [RESULT]) BODY...) |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2226 Execute body once for each element of LIST, |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2227 using the variable VAR to hold the current element. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2228 Then return the value of RESULT, or nil if RESULT is omitted. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2229 |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2230 (dotimes (VAR COUNT [RESULT]) BODY...) |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2231 Execute BODY with VAR bound to successive integers running from 0, |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2232 inclusive, to COUNT, exclusive. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2233 Then return the value of RESULT, or nil if RESULT is omitted. |
f7b7fdb0f3f4
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
27381
diff
changeset
|
2234 |
25853 | 2235 +++ |
2236 ** Regular expressions now support Posix character classes such | |
2237 as [:alpha:], [:space:] and so on. | |
2238 | |
2239 [:digit:] matches 0 through 9 | |
2240 [:cntrl:] matches ASCII control characters | |
2241 [:xdigit:] matches 0 through 9, a through f and A through F. | |
2242 [:blank:] matches space and tab only | |
2243 [:graph:] matches graphic characters--everything except ASCII control chars, | |
2244 space, and DEL. | |
2245 [:print:] matches printing characters--everything except ASCII control chars | |
2246 and DEL. | |
2247 [:alnum:] matches letters and digits. | |
2248 (But at present, for multibyte characters, | |
2249 it matches anything that has word syntax.) | |
2250 [:alpha:] matches letters. | |
2251 (But at present, for multibyte characters, | |
2252 it matches anything that has word syntax.) | |
2253 [:ascii:] matches ASCII (unibyte) characters. | |
2254 [:nonascii:] matches non-ASCII (multibyte) characters. | |
2255 [:lower:] matches anything lower-case. | |
2256 [:punct:] matches punctuation. | |
2257 (But at present, for multibyte characters, | |
2258 it matches anything that has non-word syntax.) | |
2259 [:space:] matches anything that has whitespace syntax. | |
2260 [:upper:] matches anything upper-case. | |
2261 [:word:] matches anything that has word syntax. | |
2262 | |
2263 +++ | |
2264 ** Emacs now has built-in hash tables. | |
2265 | |
2266 The following functions are defined for hash tables: | |
2267 | |
2268 - Function: make-hash-table ARGS | |
2269 | |
2270 The argument list ARGS consists of keyword/argument pairs. All arguments | |
2271 are optional. The following arguments are defined: | |
2272 | |
2273 :test TEST | |
2274 | |
2275 TEST must be a symbol specifying how to compare keys. Default is `eql'. | |
2276 Predefined are `eq', `eql' and `equal'. If TEST is not predefined, | |
2277 it must have been defined with `define-hash-table-test'. | |
2278 | |
2279 :size SIZE | |
2280 | |
2281 SIZE must be an integer > 0 giving a hint to the implementation how | |
2282 many elements will be put in the hash table. Default size is 65. | |
2283 | |
2284 :rehash-size REHASH-SIZE | |
2285 | |
2286 REHASH-SIZE specifies by how much to grow a hash table once it becomes | |
2287 full. If REHASH-SIZE is an integer, add that to the hash table's old | |
2288 size to get the new size. Otherwise, REHASH-SIZE must be a float > | |
2289 1.0, and the new size is computed by multiplying REHASH-SIZE with the | |
2290 old size. Default rehash size is 1.5. | |
2291 | |
2292 :rehash-threshold THRESHOLD | |
2293 | |
2294 THRESHOLD must be a float > 0 and <= 1.0 specifying when to resize the | |
2295 hash table. It is resized when the ratio of (number of entries) / | |
2296 (size of hash table) is >= THRESHOLD. Default threshold is 0.8. | |
2297 | |
2298 :weakness WEAK | |
2299 | |
30502 | 2300 WEAK must be either nil, one of the symbols `key, `value', |
2301 `key-or-value', `key-and-value', or t, meaning the same as | |
2302 `key-and-value'. Entries are removed from weak tables during garbage | |
2303 collection if their key and/or value are not referenced elsewhere | |
2304 outside of the hash table. Default are non-weak hash tables. | |
25853 | 2305 |
2306 - Function: makehash &optional TEST | |
2307 | |
2308 Similar to make-hash-table, but only TEST can be specified. | |
2309 | |
2310 - Function: hash-table-p TABLE | |
2311 | |
2312 Returns non-nil if TABLE is a hash table object. | |
2313 | |
2314 - Function: copy-hash-table TABLE | |
2315 | |
2316 Returns a copy of TABLE. Only the table itself is copied, keys and | |
2317 values are shared. | |
2318 | |
2319 - Function: hash-table-count TABLE | |
2320 | |
2321 Returns the number of entries in TABLE. | |
2322 | |
2323 - Function: hash-table-rehash-size TABLE | |
2324 | |
2325 Returns the rehash size of TABLE. | |
2326 | |
2327 - Function: hash-table-rehash-threshold TABLE | |
2328 | |
2329 Returns the rehash threshold of TABLE. | |
2330 | |
2331 - Function: hash-table-rehash-size TABLE | |
2332 | |
2333 Returns the size of TABLE. | |
2334 | |
30789 | 2335 - Function: hash-table-test TABLE |
25853 | 2336 |
2337 Returns the test TABLE uses to compare keys. | |
2338 | |
2339 - Function: hash-table-weakness TABLE | |
2340 | |
2341 Returns the weakness specified for TABLE. | |
2342 | |
2343 - Function: clrhash TABLE | |
2344 | |
2345 Clear TABLE. | |
2346 | |
2347 - Function: gethash KEY TABLE &optional DEFAULT | |
2348 | |
2349 Look up KEY in TABLE and return its associated VALUE or DEFAULT if | |
2350 not found. | |
2351 | |
26264 | 2352 - Function: puthash KEY VALUE TABLE |
25853 | 2353 |
2354 Associate KEY with VALUE in TABLE. If KEY is already associated with | |
2355 another value, replace the old value with VALUE. | |
2356 | |
2357 - Function: remhash KEY TABLE | |
2358 | |
2359 Remove KEY from TABLE if it is there. | |
2360 | |
2361 - Function: maphash FUNCTION TABLE | |
2362 | |
2363 Call FUNCTION for all elements in TABLE. FUNCTION must take two | |
2364 arguments KEY and VALUE. | |
2365 | |
2366 - Function: sxhash OBJ | |
2367 | |
2368 Return a hash code for Lisp object OBJ. | |
2369 | |
2370 - Function: define-hash-table-test NAME TEST-FN HASH-FN | |
2371 | |
2372 Define a new hash table test named NAME. If NAME is specified as | |
2373 a test in `make-hash-table', the table created will use TEST-FN for | |
26264 | 2374 comparing keys, and HASH-FN to compute hash codes for keys. Test |
25853 | 2375 and hash function are stored as symbol property `hash-table-test' |
2376 of NAME with a value of (TEST-FN HASH-FN). | |
2377 | |
2378 TEST-FN must take two arguments and return non-nil if they are the same. | |
2379 | |
2380 HASH-FN must take one argument and return an integer that is the hash | |
2381 code of the argument. The function should use the whole range of | |
2382 integer values for hash code computation, including negative integers. | |
2383 | |
2384 Example: The following creates a hash table whose keys are supposed to | |
2385 be strings that are compared case-insensitively. | |
2386 | |
2387 (defun case-fold-string= (a b) | |
2388 (compare-strings a nil nil b nil nil t)) | |
2389 | |
2390 (defun case-fold-string-hash (a) | |
2391 (sxhash (upcase a))) | |
2392 | |
26264 | 2393 (define-hash-table-test 'case-fold 'case-fold-string= |
25853 | 2394 'case-fold-string-hash)) |
2395 | |
2396 (make-hash-table :test 'case-fold) | |
2397 | |
2398 +++ | |
2399 ** The Lisp reader handles circular structure. | |
2400 | |
2401 It now works to use the #N= and #N# constructs to represent | |
2402 circular structures. For example, #1=(a . #1#) represents | |
2403 a cons cell which is its own cdr. | |
2404 | |
2405 +++ | |
2406 ** The Lisp printer handles circular structure. | |
2407 | |
2408 If you bind print-circle to a non-nil value, the Lisp printer outputs | |
2409 #N= and #N# constructs to represent circular and shared structure. | |
2410 | |
2411 +++ | |
2412 ** If the second argument to `move-to-column' is anything but nil or | |
2413 t, that means replace a tab with spaces if necessary to reach the | |
2414 specified column, but do not add spaces at the end of the line if it | |
2415 is too short to reach that column. | |
2416 | |
2417 +++ | |
2418 ** perform-replace has a new feature: the REPLACEMENTS argument may | |
2419 now be a cons cell (FUNCTION . DATA). This means to call FUNCTION | |
2420 after each match to get the replacement text. FUNCTION is called with | |
2421 two arguments: DATA, and the number of replacements already made. | |
2422 | |
2423 If the FROM-STRING contains any upper-case letters, | |
2424 perform-replace also turns off `case-fold-search' temporarily | |
2425 and inserts the replacement text without altering case in it. | |
2426 | |
2427 +++ | |
2428 ** The function buffer-size now accepts an optional argument | |
2429 to specify which buffer to return the size of. | |
2430 | |
2431 +++ | |
2432 ** The calendar motion commands now run the normal hook | |
2433 calendar-move-hook after moving point. | |
2434 | |
2435 +++ | |
2436 ** The new variable small-temporary-file-directory specifies a | |
2437 directory to use for creating temporary files that are likely to be | |
2438 small. (Certain Emacs features use this directory.) If | |
2439 small-temporary-file-directory is nil, they use | |
2440 temporary-file-directory instead. | |
2441 | |
2442 +++ | |
2443 ** The variable `inhibit-modification-hooks', if non-nil, inhibits all | |
2444 the hooks that track changes in the buffer. This affects | |
2445 `before-change-functions' and `after-change-functions', as well as | |
2446 hooks attached to text properties and overlay properties. | |
2447 | |
2448 +++ | |
2449 ** assoc-delete-all is a new function that deletes all the | |
2450 elements of an alist which have a particular value as the car. | |
2451 | |
2452 +++ | |
2453 ** make-temp-file provides a more reliable way to create a temporary file. | |
2454 | |
2455 make-temp-file is used like make-temp-name, except that it actually | |
2456 creates the file before it returns. This prevents a timing error, | |
2457 ensuring that no other job can use the same name for a temporary file. | |
2458 | |
2459 +++ | |
2460 ** New exclusive-open feature in `write-region' | |
2461 | |
2462 The optional seventh arg is now called MUSTBENEW. If non-nil, it insists | |
2463 on a check for an existing file with the same name. If MUSTBENEW | |
2464 is `excl', that means to get an error if the file already exists; | |
2465 never overwrite. If MUSTBENEW is neither nil nor `excl', that means | |
2466 ask for confirmation before overwriting, but do go ahead and | |
2467 overwrite the file if the user gives confirmation. | |
2468 | |
2469 If the MUSTBENEW argument in `write-region' is `excl', | |
2470 that means to use a special feature in the `open' system call | |
2471 to get an error if the file exists at that time. | |
2472 The error reported is `file-already-exists'. | |
2473 | |
2474 +++ | |
2475 ** Function `format' now handles text properties. | |
2476 | |
2477 Text properties of the format string are applied to the result string. | |
2478 If the result string is longer than the format string, text properties | |
2479 ending at the end of the format string are extended to the end of the | |
2480 result string. | |
2481 | |
2482 Text properties from string arguments are applied to the result | |
2483 string where arguments appear in the result string. | |
2484 | |
2485 Example: | |
2486 | |
2487 (let ((s1 "hello, %s") | |
2488 (s2 "world")) | |
2489 (put-text-property 0 (length s1) 'face 'bold s1) | |
2490 (put-text-property 0 (length s2) 'face 'italic s2) | |
26034 | 2491 (format s1 s2)) |
25853 | 2492 |
2493 results in a bold-face string with an italic `world' at the end. | |
2494 | |
2495 +++ | |
2496 ** Messages can now be displayed with text properties. | |
2497 | |
2498 Text properties are handled as described above for function `format'. | |
2499 The following example displays a bold-face message with an italic | |
2500 argument in it. | |
2501 | |
2502 (let ((msg "hello, %s!") | |
2503 (arg "world")) | |
2504 (put-text-property 0 (length msg) 'face 'bold msg) | |
2505 (put-text-property 0 (length arg) 'face 'italic arg) | |
2506 (message msg arg)) | |
2507 | |
2508 +++ | |
2509 ** Sound support | |
2510 | |
2511 Emacs supports playing sound files on GNU/Linux and the free BSDs | |
2512 (Voxware driver and native BSD driver, aka as Luigi's driver). | |
2513 | |
2514 Currently supported file formats are RIFF-WAVE (*.wav) and Sun Audio | |
2515 (*.au). You must configure Emacs with the option `--with-sound=yes' | |
2516 to enable sound support. | |
2517 | |
2518 Sound files can be played by calling (play-sound SOUND). SOUND is a | |
2519 list of the form `(sound PROPERTY...)'. The function is only defined | |
2520 when sound support is present for the system on which Emacs runs. The | |
2521 functions runs `play-sound-functions' with one argument which is the | |
2522 sound to play, before playing the sound. | |
2523 | |
2524 The following sound properties are supported: | |
2525 | |
2526 - `:file FILE' | |
2527 | |
2528 FILE is a file name. If FILE isn't an absolute name, it will be | |
2529 searched relative to `data-directory'. | |
2530 | |
27148 | 2531 - `:data DATA' |
2532 | |
2533 DATA is a string containing sound data. Either :file or :data | |
2534 may be present, but not both. | |
2535 | |
25853 | 2536 - `:volume VOLUME' |
2537 | |
2538 VOLUME must be an integer in the range 0..100 or a float in the range | |
2539 0..1. This property is optional. | |
2540 | |
2541 Other properties are ignored. | |
2542 | |
2543 ** `multimedia' is a new Finder keyword and Custom group. | |
26933 | 2544 |
2545 ** keywordp is a new predicate to test efficiently for an object being | |
2546 a keyword symbol. | |
27145
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2547 |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2548 ** Changes to garbage collection |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2549 |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2550 *** The function garbage-collect now additionally returns the number |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2551 of live and free strings. |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2552 |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2553 *** There is a new variable `strings-consed' holding the number of |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2554 strings that have been consed so far. |
01abacc81cce
Changes to garbage-collect, new var strings-consed,
Gerd Moellmann <gerd@gnu.org>
parents:
27144
diff
changeset
|
2555 |
25853 | 2556 |
29151 | 2557 * Lisp-level Display features added after release 2.6 of the Emacs |
2558 Lisp Manual | |
2559 | |
31220 | 2560 *** On window systems, `glyph-table' is no longer used. |
2561 | |
30222 | 2562 +++ |
2563 ** Help strings in menu items are now used to provide `help-echo' text. | |
29939 | 2564 |
2565 ** The function `image-size' can be used to determine the size of an | |
2566 image. | |
2567 | |
2568 - Function: image-size SPEC &optional PIXELS FRAME | |
2569 | |
2570 Return the size of an image as a pair (WIDTH . HEIGHT). | |
2571 | |
2572 SPEC is an image specification. PIXELS non-nil means return sizes | |
2573 measured in pixels, otherwise return sizes measured in canonical | |
2574 character units (fractions of the width/height of the frame's default | |
2575 font). FRAME is the frame on which the image will be displayed. | |
2576 FRAME nil or omitted means use the selected frame. | |
2577 | |
31639 | 2578 ** The function `image-mask-p' can be used to determine if an image |
2579 has a mask bitmap. | |
2580 | |
2581 - Function: image-mask-p SPEC &optional FRAME | |
2582 | |
2583 Return t if image SPEC has a mask bitmap. | |
2584 FRAME is the frame on which the image will be displayed. FRAME nil | |
2585 or omitted means use the selected frame. | |
2586 | |
31156 | 2587 +++ |
29506 | 2588 ** The function `find-image' can be used to find a usable image |
2589 satisfying one of a list of specifications. | |
2590 | |
2591 +++ | |
2592 ** The STRING argument of `put-image' and `insert-image' is now | |
2593 optional. | |
2594 | |
31156 | 2595 +++ |
2596 ** Image specifications may contain the property `:ascent center' (see | |
2597 below). | |
29151 | 2598 |
2599 | |
25853 | 2600 * New Lisp-level Display features in Emacs 21.1 |
2601 | |
2602 Note that +++ before an item means the Lisp manual has been updated. | |
2603 --- means that I have decided it does not need to be in the Lisp manual. | |
2604 When you add a new item, please add it without either +++ or --- | |
2605 so I will know I still need to look at it -- rms. | |
2606 | |
28634 | 2607 ** The function tty-suppress-bold-inverse-default-colors can be used |
2608 to make Emacs avoid displaying text with bold black foreground on TTYs. | |
2609 | |
2610 Some terminals, notably PC consoles, emulate bold text by displaying | |
2611 text in brighter colors. On such a console, a bold black foreground | |
2612 is displayed in a gray color. If this turns out to be hard to read on | |
2613 your monitor---the problem occurred with the mode line on | |
2614 laptops---you can instruct Emacs to ignore the text's boldness, and to | |
2615 just display it black instead. | |
2616 | |
2617 This situation can't be detected automatically. You will have to put | |
2618 a line like | |
2619 | |
2620 (tty-suppress-bold-inverse-default-colors t) | |
2621 | |
2622 in your `.emacs'. | |
2623 | |
25853 | 2624 ** New face implementation. |
2625 | |
2626 Emacs faces have been reimplemented from scratch. They don't use XLFD | |
2627 font names anymore and face merging now works as expected. | |
2628 | |
2629 +++ | |
2630 *** New faces. | |
2631 | |
2632 Each face can specify the following display attributes: | |
2633 | |
2634 1. Font family or fontset alias name. | |
26264 | 2635 |
25853 | 2636 2. Relative proportionate width, aka character set width or set |
2637 width (swidth), e.g. `semi-compressed'. | |
26264 | 2638 |
25853 | 2639 3. Font height in 1/10pt |
26264 | 2640 |
25853 | 2641 4. Font weight, e.g. `bold'. |
26264 | 2642 |
25853 | 2643 5. Font slant, e.g. `italic'. |
26264 | 2644 |
25853 | 2645 6. Foreground color. |
26264 | 2646 |
25853 | 2647 7. Background color. |
2648 | |
2649 8. Whether or not characters should be underlined, and in what color. | |
2650 | |
2651 9. Whether or not characters should be displayed in inverse video. | |
2652 | |
2653 10. A background stipple, a bitmap. | |
2654 | |
2655 11. Whether or not characters should be overlined, and in what color. | |
2656 | |
2657 12. Whether or not characters should be strike-through, and in what | |
2658 color. | |
2659 | |
2660 13. Whether or not a box should be drawn around characters, its | |
2661 color, the width of the box lines, and 3D appearance. | |
2662 | |
2663 Faces are frame-local by nature because Emacs allows to define the | |
2664 same named face (face names are symbols) differently for different | |
2665 frames. Each frame has an alist of face definitions for all named | |
2666 faces. The value of a named face in such an alist is a Lisp vector | |
2667 with the symbol `face' in slot 0, and a slot for each each of the face | |
2668 attributes mentioned above. | |
2669 | |
2670 There is also a global face alist `face-new-frame-defaults'. Face | |
2671 definitions from this list are used to initialize faces of newly | |
2672 created frames. | |
26264 | 2673 |
25853 | 2674 A face doesn't have to specify all attributes. Those not specified |
2675 have a nil value. Faces specifying all attributes are called | |
2676 `fully-specified'. | |
2677 | |
2678 +++ | |
2679 *** Face merging. | |
2680 | |
2681 The display style of a given character in the text is determined by | |
2682 combining several faces. This process is called `face merging'. Any | |
2683 aspect of the display style that isn't specified by overlays or text | |
2684 properties is taken from the `default' face. Since it is made sure | |
2685 that the default face is always fully-specified, face merging always | |
2686 results in a fully-specified face. | |
2687 | |
2688 +++ | |
2689 *** Face realization. | |
2690 | |
2691 After all face attributes for a character have been determined by | |
2692 merging faces of that character, that face is `realized'. The | |
2693 realization process maps face attributes to what is physically | |
2694 available on the system where Emacs runs. The result is a `realized | |
2695 face' in form of an internal structure which is stored in the face | |
2696 cache of the frame on which it was realized. | |
2697 | |
2698 Face realization is done in the context of the charset of the | |
2699 character to display because different fonts and encodings are used | |
2700 for different charsets. In other words, for characters of different | |
2701 charsets, different realized faces are needed to display them. | |
2702 | |
2703 Except for composite characters, faces are always realized for a | |
2704 specific character set and contain a specific font, even if the face | |
2705 being realized specifies a fontset. The reason is that the result of | |
2706 the new font selection stage is better than what can be done with | |
2707 statically defined font name patterns in fontsets. | |
2708 | |
2709 In unibyte text, Emacs' charsets aren't applicable; function | |
2710 `char-charset' reports ASCII for all characters, including those > | |
2711 0x7f. The X registry and encoding of fonts to use is determined from | |
2712 the variable `face-default-registry' in this case. The variable is | |
2713 initialized at Emacs startup time from the font the user specified for | |
2714 Emacs. | |
2715 | |
2716 Currently all unibyte text, i.e. all buffers with | |
2717 `enable-multibyte-characters' nil are displayed with fonts of the same | |
2718 registry and encoding `face-default-registry'. This is consistent | |
2719 with the fact that languages can also be set globally, only. | |
2720 | |
2721 ++++ | |
2722 **** Clearing face caches. | |
2723 | |
2724 The Lisp function `clear-face-cache' can be called to clear face caches | |
2725 on all frames. If called with a non-nil argument, it will also unload | |
2726 unused fonts. | |
2727 | |
2728 +++ | |
2729 *** Font selection. | |
26264 | 2730 |
25853 | 2731 Font selection tries to find the best available matching font for a |
2732 given (charset, face) combination. This is done slightly differently | |
2733 for faces specifying a fontset, or a font family name. | |
2734 | |
2735 If the face specifies a fontset name, that fontset determines a | |
2736 pattern for fonts of the given charset. If the face specifies a font | |
2737 family, a font pattern is constructed. Charset symbols have a | |
2738 property `x-charset-registry' for that purpose that maps a charset to | |
2739 an XLFD registry and encoding in the font pattern constructed. | |
2740 | |
2741 Available fonts on the system on which Emacs runs are then matched | |
2742 against the font pattern. The result of font selection is the best | |
2743 match for the given face attributes in this font list. | |
2744 | |
2745 Font selection can be influenced by the user. | |
2746 | |
2747 The user can specify the relative importance he gives the face | |
2748 attributes width, height, weight, and slant by setting | |
2749 face-font-selection-order (faces.el) to a list of face attribute | |
2750 names. The default is (:width :height :weight :slant), and means | |
2751 that font selection first tries to find a good match for the font | |
2752 width specified by a face, then---within fonts with that width---tries | |
2753 to find a best match for the specified font height, etc. | |
2754 | |
2755 Setting `face-alternative-font-family-alist' allows the user to | |
2756 specify alternative font families to try if a family specified by a | |
2757 face doesn't exist. | |
2758 | |
2759 +++ | |
2760 **** Scalable fonts | |
2761 | |
2762 Emacs can make use of scalable fonts but doesn't do so by default, | |
2763 since the use of too many or too big scalable fonts may crash XFree86 | |
2764 servers. | |
2765 | |
2766 To enable scalable font use, set the variable | |
26034 | 2767 `scalable-fonts-allowed'. A value of nil, the default, means never use |
25853 | 2768 scalable fonts. A value of t means any scalable font may be used. |
2769 Otherwise, the value must be a list of regular expressions. A | |
2770 scalable font may then be used if it matches a regular expression from | |
2771 that list. Example: | |
2772 | |
2773 (setq scalable-fonts-allowed '("muleindian-2$")) | |
2774 | |
2775 allows the use of scalable fonts with registry `muleindian-2'. | |
2776 | |
2777 +++ | |
2778 *** Functions and variables related to font selection. | |
2779 | |
2780 - Function: x-family-fonts &optional FAMILY FRAME | |
2781 | |
2782 Return a list of available fonts of family FAMILY on FRAME. If FAMILY | |
2783 is omitted or nil, list all families. Otherwise, FAMILY must be a | |
2784 string, possibly containing wildcards `?' and `*'. | |
2785 | |
2786 If FRAME is omitted or nil, use the selected frame. Each element of | |
2787 the result is a vector [FAMILY WIDTH POINT-SIZE WEIGHT SLANT FIXED-P | |
2788 FULL REGISTRY-AND-ENCODING]. FAMILY is the font family name. | |
2789 POINT-SIZE is the size of the font in 1/10 pt. WIDTH, WEIGHT, and | |
2790 SLANT are symbols describing the width, weight and slant of the font. | |
2791 These symbols are the same as for face attributes. FIXED-P is non-nil | |
2792 if the font is fixed-pitch. FULL is the full name of the font, and | |
2793 REGISTRY-AND-ENCODING is a string giving the registry and encoding of | |
2794 the font. The result list is sorted according to the current setting | |
2795 of the face font sort order. | |
2796 | |
26264 | 2797 - Function: x-font-family-list |
25853 | 2798 |
2799 Return a list of available font families on FRAME. If FRAME is | |
2800 omitted or nil, use the selected frame. Value is a list of conses | |
2801 (FAMILY . FIXED-P) where FAMILY is a font family, and FIXED-P is | |
2802 non-nil if fonts of that family are fixed-pitch. | |
2803 | |
2804 - Variable: font-list-limit | |
2805 | |
2806 Limit for font matching. If an integer > 0, font matching functions | |
2807 won't load more than that number of fonts when searching for a | |
2808 matching font. The default is currently 100. | |
2809 | |
2810 +++ | |
2811 *** Setting face attributes. | |
2812 | |
2813 For the most part, the new face implementation is interface-compatible | |
2814 with the old one. Old face attribute related functions are now | |
2815 implemented in terms of the new functions `set-face-attribute' and | |
2816 `face-attribute'. | |
2817 | |
2818 Face attributes are identified by their names which are keyword | |
2819 symbols. All attributes can be set to `unspecified'. | |
2820 | |
2821 The following attributes are recognized: | |
2822 | |
2823 `:family' | |
2824 | |
2825 VALUE must be a string specifying the font family, e.g. ``courier'', | |
2826 or a fontset alias name. If a font family is specified, wild-cards `*' | |
2827 and `?' are allowed. | |
2828 | |
2829 `:width' | |
2830 | |
2831 VALUE specifies the relative proportionate width of the font to use. | |
2832 It must be one of the symbols `ultra-condensed', `extra-condensed', | |
2833 `condensed', `semi-condensed', `normal', `semi-expanded', `expanded', | |
2834 `extra-expanded', or `ultra-expanded'. | |
2835 | |
2836 `:height' | |
2837 | |
31183
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2838 VALUE must be either an integer specifying the height of the font to use |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2839 in 1/10 pt, a floating point number specifying the amount by which to |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2840 scale any underlying face, or a function, which is called with the old |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2841 height (from the underlying face), and should return the new height. |
25853 | 2842 |
2843 `:weight' | |
2844 | |
2845 VALUE specifies the weight of the font to use. It must be one of the | |
2846 symbols `ultra-bold', `extra-bold', `bold', `semi-bold', `normal', | |
2847 `semi-light', `light', `extra-light', `ultra-light'. | |
2848 | |
2849 `:slant' | |
2850 | |
2851 VALUE specifies the slant of the font to use. It must be one of the | |
2852 symbols `italic', `oblique', `normal', `reverse-italic', or | |
2853 `reverse-oblique'. | |
2854 | |
2855 `:foreground', `:background' | |
2856 | |
2857 VALUE must be a color name, a string. | |
2858 | |
2859 `:underline' | |
2860 | |
2861 VALUE specifies whether characters in FACE should be underlined. If | |
2862 VALUE is t, underline with foreground color of the face. If VALUE is | |
2863 a string, underline with that color. If VALUE is nil, explicitly | |
2864 don't underline. | |
2865 | |
2866 `:overline' | |
2867 | |
2868 VALUE specifies whether characters in FACE should be overlined. If | |
2869 VALUE is t, overline with foreground color of the face. If VALUE is a | |
2870 string, overline with that color. If VALUE is nil, explicitly don't | |
2871 overline. | |
2872 | |
2873 `:strike-through' | |
2874 | |
2875 VALUE specifies whether characters in FACE should be drawn with a line | |
2876 striking through them. If VALUE is t, use the foreground color of the | |
2877 face. If VALUE is a string, strike-through with that color. If VALUE | |
2878 is nil, explicitly don't strike through. | |
2879 | |
2880 `:box' | |
2881 | |
2882 VALUE specifies whether characters in FACE should have a box drawn | |
2883 around them. If VALUE is nil, explicitly don't draw boxes. If | |
2884 VALUE is t, draw a box with lines of width 1 in the foreground color | |
2885 of the face. If VALUE is a string, the string must be a color name, | |
2886 and the box is drawn in that color with a line width of 1. Otherwise, | |
2887 VALUE must be a property list of the form `(:line-width WIDTH | |
2888 :color COLOR :style STYLE)'. If a keyword/value pair is missing from | |
2889 the property list, a default value will be used for the value, as | |
2890 specified below. WIDTH specifies the width of the lines to draw; it | |
2891 defaults to 1. COLOR is the name of the color to draw in, default is | |
2892 the foreground color of the face for simple boxes, and the background | |
2893 color of the face for 3D boxes. STYLE specifies whether a 3D box | |
2894 should be draw. If STYLE is `released-button', draw a box looking | |
2895 like a released 3D button. If STYLE is `pressed-button' draw a box | |
2896 that appears like a pressed button. If STYLE is nil, the default if | |
2897 the property list doesn't contain a style specification, draw a 2D | |
2898 box. | |
2899 | |
2900 `:inverse-video' | |
2901 | |
2902 VALUE specifies whether characters in FACE should be displayed in | |
2903 inverse video. VALUE must be one of t or nil. | |
2904 | |
2905 `:stipple' | |
2906 | |
2907 If VALUE is a string, it must be the name of a file of pixmap data. | |
2908 The directories listed in the `x-bitmap-file-path' variable are | |
2909 searched. Alternatively, VALUE may be a list of the form (WIDTH | |
2910 HEIGHT DATA) where WIDTH and HEIGHT are the size in pixels, and DATA | |
2911 is a string containing the raw bits of the bitmap. VALUE nil means | |
2912 explicitly don't use a stipple pattern. | |
2913 | |
2914 For convenience, attributes `:family', `:width', `:height', `:weight', | |
2915 and `:slant' may also be set in one step from an X font name: | |
2916 | |
2917 `:font' | |
2918 | |
2919 Set font-related face attributes from VALUE. VALUE must be a valid | |
2920 XLFD font name. If it is a font name pattern, the first matching font | |
2921 is used--this is for compatibility with the behavior of previous | |
2922 versions of Emacs. | |
2923 | |
2924 For compatibility with Emacs 20, keywords `:bold' and `:italic' can | |
2925 be used to specify that a bold or italic font should be used. VALUE | |
2926 must be t or nil in that case. A value of `unspecified' is not allowed." | |
2927 | |
2928 Please see also the documentation of `set-face-attribute' and | |
2929 `defface'. | |
2930 | |
31183
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2931 `:inherit' |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2932 |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2933 VALUE is the name of a face from which to inherit attributes, or a list |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2934 of face names. Attributes from inherited faces are merged into the face |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2935 like an underlying face would be, with higher priority than underlying faces. |
cb5d69bcd655
Add description of new :inherit face attribute, and additional legal
Miles Bader <miles@gnu.org>
parents:
31156
diff
changeset
|
2936 |
25853 | 2937 *** Face attributes and X resources |
2938 | |
2939 The following X resource names can be used to set face attributes | |
2940 from X resources: | |
2941 | |
2942 Face attribute X resource class | |
2943 ----------------------------------------------------------------------- | |
2944 :family attributeFamily . Face.AttributeFamily | |
2945 :width attributeWidth Face.AttributeWidth | |
2946 :height attributeHeight Face.AttributeHeight | |
2947 :weight attributeWeight Face.AttributeWeight | |
2948 :slant attributeSlant Face.AttributeSlant | |
2949 foreground attributeForeground Face.AttributeForeground | |
2950 :background attributeBackground . Face.AttributeBackground | |
2951 :overline attributeOverline Face.AttributeOverline | |
2952 :strike-through attributeStrikeThrough Face.AttributeStrikeThrough | |
2953 :box attributeBox Face.AttributeBox | |
2954 :underline attributeUnderline Face.AttributeUnderline | |
2955 :inverse-video attributeInverse Face.AttributeInverse | |
2956 :stipple attributeStipple Face.AttributeStipple | |
26264 | 2957 or attributeBackgroundPixmap |
25853 | 2958 Face.AttributeBackgroundPixmap |
2959 :font attributeFont Face.AttributeFont | |
2960 :bold attributeBold Face.AttributeBold | |
2961 :italic attributeItalic . Face.AttributeItalic | |
2962 :font attributeFont Face.AttributeFont | |
2963 | |
2964 +++ | |
2965 *** Text property `face'. | |
2966 | |
2967 The value of the `face' text property can now be a single face | |
2968 specification or a list of such specifications. Each face | |
2969 specification can be | |
2970 | |
2971 1. A symbol or string naming a Lisp face. | |
2972 | |
2973 2. A property list of the form (KEYWORD VALUE ...) where each | |
2974 KEYWORD is a face attribute name, and VALUE is an appropriate value | |
2975 for that attribute. Please see the doc string of `set-face-attribute' | |
2976 for face attribute names. | |
2977 | |
2978 3. Conses of the form (FOREGROUND-COLOR . COLOR) or | |
2979 (BACKGROUND-COLOR . COLOR) where COLOR is a color name. This is | |
2980 for compatibility with previous Emacs versions. | |
2981 | |
2982 +++ | |
2983 ** Support functions for colors on text-only terminals. | |
2984 | |
27092
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2985 The function `tty-color-define' can be used to define colors for use |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2986 on TTY and MSDOS frames. It maps a color name to a color number on |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2987 the terminal. Emacs defines a couple of common color mappings by |
25853 | 2988 default. You can get defined colors with a call to |
27092
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2989 `defined-colors'. The function `tty-color-clear' can be |
25853 | 2990 used to clear the mapping table. |
2991 | |
27092
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2992 ** Unified support for colors independent of frame type. |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2993 |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2994 The new functions `defined-colors', `color-defined-p', `color-values', |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2995 and `display-color-p' work for any type of frame. On frames whose |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2996 type is neither x nor w32, these functions transparently map X-style |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2997 color specifications to the closest colors supported by the frame |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2998 display. Lisp programs should use these new functions instead of the |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
2999 old `x-defined-colors', `x-color-defined-p', `x-color-values', and |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3000 `x-display-color-p'. (The old function names are still available for |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3001 compatibility; they are now aliases of the new names.) Lisp programs |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3002 should no more look at the value of the variable window-system to |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3003 modify their color-related behavior. |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3004 |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3005 The primitives `color-gray-p' and `color-supported-p' also work for |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3006 any frame type. |
60f5b0f50db9
Document the unified frame-independent support for colors and faces.
Eli Zaretskii <eliz@gnu.org>
parents:
27076
diff
changeset
|
3007 |
27573
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3008 ** Platform-independent functions to describe display capabilities. |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3009 |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3010 The new functions `display-mouse-p', `display-popup-menus-p', |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3011 `display-graphic-p', `display-selections-p', `display-screens', |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3012 `display-pixel-width', `display-pixel-height', `display-mm-width', |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3013 `display-mm-height', `display-backing-store', `display-save-under', |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3014 `display-planes', `display-color-cells', `display-visual-class', and |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3015 `display-grayscale-p' describe the basic capabilities of a particular |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3016 display. Lisp programs should call these functions instead of testing |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3017 the value of the variables `window-system' or `system-type', or calling |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3018 platform-specific functions such as `x-display-pixel-width'. |
32f4457e5501
Document functions which return display capabilities.
Eli Zaretskii <eliz@gnu.org>
parents:
27533
diff
changeset
|
3019 |
25853 | 3020 +++ |
3021 ** The minibuffer prompt is now actually inserted in the minibuffer. | |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3022 |
25853 | 3023 This makes it possible to scroll through the prompt, if you want to. |
3024 | |
3025 The function minubuffer-prompt-end returns the current position of the | |
3026 end of the minibuffer prompt, if the minibuffer is current. | |
3027 Otherwise, it returns zero. | |
3028 | |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3029 ** New `field' abstraction in buffers. |
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3030 |
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3031 There is now code to support an abstraction called `fields' in emacs |
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3032 buffers. A field is a contiguous region of text with the same `field' |
30776 | 3033 property (which can be a text property or an overlay). |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3034 |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3035 Many emacs functions, such as forward-word, forward-sentence, |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3036 forward-paragraph, beginning-of-line, etc., stop moving when they come |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3037 to the boundary between fields; beginning-of-line and end-of-line will |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3038 not let the point move past the field boundary, but other movement |
27144 | 3039 commands continue into the next field if repeated. Stopping at field |
3040 boundaries can be suppressed programmatically by binding | |
3041 `inhibit-field-text-motion' to a non-nil value around calls to these | |
3042 functions. | |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3043 |
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3044 Now that the minibuffer prompt is inserted into the minibuffer, it is in |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3045 a separate field from the user-input part of the buffer, so that common |
26062
fd35581d53c1
Add Miles Bader's description of fields.
Gerd Moellmann <gerd@gnu.org>
parents:
26034
diff
changeset
|
3046 editing commands treat the user's text separately from the prompt. |
25853 | 3047 |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3048 The following functions are defined for operating on fields: |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3049 |
30776 | 3050 - Function: constrain-to-field NEW-POS OLD-POS &optional ESCAPE-FROM-EDGE ONLY-IN-LINE INHIBIT-CAPTURE-PROPERTY |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3051 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3052 Return the position closest to NEW-POS that is in the same field as OLD-POS. |
30776 | 3053 |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3054 A field is a region of text with the same `field' property. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3055 If NEW-POS is nil, then the current point is used instead, and set to the |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3056 constrained position if that is is different. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3057 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3058 If OLD-POS is at the boundary of two fields, then the allowable |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3059 positions for NEW-POS depends on the value of the optional argument |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3060 ESCAPE-FROM-EDGE: If ESCAPE-FROM-EDGE is nil, then NEW-POS is |
30776 | 3061 constrained to the field that has the same `field' char-property |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3062 as any new characters inserted at OLD-POS, whereas if ESCAPE-FROM-EDGE |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3063 is non-nil, NEW-POS is constrained to the union of the two adjacent |
30776 | 3064 fields. Additionally, if two fields are separated by another field with |
3065 the special value `boundary', then any point within this special field is | |
3066 also considered to be `on the boundary'. | |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3067 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3068 If the optional argument ONLY-IN-LINE is non-nil and constraining |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3069 NEW-POS would move it to a different line, NEW-POS is returned |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3070 unconstrained. This useful for commands that move by line, like |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3071 C-n or C-a, which should generally respect field boundaries |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3072 only in the case where they can still move to the right line. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3073 |
30776 | 3074 If the optional argument INHIBIT-CAPTURE-PROPERTY is non-nil, and OLD-POS has |
3075 a non-nil property of that name, then any field boundaries are ignored. | |
3076 | |
3077 Field boundaries are not noticed if `inhibit-field-text-motion' is non-nil. | |
3078 | |
3079 - Function: delete-field &optional POS | |
3080 | |
3081 Delete the field surrounding POS. | |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3082 A field is a region of text with the same `field' property. |
30776 | 3083 If POS is nil, the value of point is used for POS. |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3084 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3085 - Function: field-beginning &optional POS ESCAPE-FROM-EDGE |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3086 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3087 Return the beginning of the field surrounding POS. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3088 A field is a region of text with the same `field' property. |
30776 | 3089 If POS is nil, the value of point is used for POS. |
3090 If ESCAPE-FROM-EDGE is non-nil and POS is at the beginning of its | |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3091 field, then the beginning of the *previous* field is returned. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3092 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3093 - Function: field-end &optional POS ESCAPE-FROM-EDGE |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3094 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3095 Return the end of the field surrounding POS. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3096 A field is a region of text with the same `field' property. |
30776 | 3097 If POS is nil, the value of point is used for POS. |
3098 If ESCAPE-FROM-EDGE is non-nil and POS is at the end of its field, | |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3099 then the end of the *following* field is returned. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3100 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3101 - Function: field-string &optional POS |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3102 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3103 Return the contents of the field surrounding POS as a string. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3104 A field is a region of text with the same `field' property. |
30776 | 3105 If POS is nil, the value of point is used for POS. |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3106 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3107 - Function: field-string-no-properties &optional POS |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3108 |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3109 Return the contents of the field around POS, without text-properties. |
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3110 A field is a region of text with the same `field' property. |
30776 | 3111 If POS is nil, the value of point is used for POS. |
26300
25356c16306f
Expanded description of `field' property from Miles Bader.
Gerd Moellmann <gerd@gnu.org>
parents:
26292
diff
changeset
|
3112 |
25853 | 3113 +++ |
3114 ** Image support. | |
3115 | |
3116 Emacs can now display images. Images are inserted into text by giving | |
3117 strings or buffer text a `display' text property containing one of | |
3118 (AREA IMAGE) or IMAGE. The display of the `display' property value | |
3119 replaces the display of the characters having that property. | |
3120 | |
3121 If the property value has the form (AREA IMAGE), AREA must be one of | |
3122 `(margin left-margin)', `(margin right-margin)' or `(margin nil)'. If | |
3123 AREA is `(margin nil)', IMAGE will be displayed in the text area of a | |
3124 window, otherwise it will be displayed in the left or right marginal | |
3125 area. | |
3126 | |
3127 IMAGE is an image specification. | |
3128 | |
3129 *** Image specifications | |
3130 | |
3131 Image specifications are lists of the form `(image PROPS)' where PROPS | |
3132 is a property list whose keys are keyword symbols. Each | |
3133 specifications must contain a property `:type TYPE' with TYPE being a | |
26403 | 3134 symbol specifying the image type, e.g. `xbm'. Properties not |
3135 described below are ignored. | |
25853 | 3136 |
3137 The following is a list of properties all image types share. | |
3138 | |
3139 `:ascent ASCENT' | |
3140 | |
28789 | 3141 ASCENT must be a number in the range 0..100, or the symbol `center'. |
3142 If it is a number, it specifies the percentage of the image's height | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
3143 to use for its ascent. |
28789 | 3144 |
3145 If not specified, ASCENT defaults to the value 50 which means that the | |
3146 image will be centered with the base line of the row it appears in. | |
3147 | |
30483
05fc373ff5b8
mention `float-time' and the remote file modtime check
Sam Steingold <sds@gnu.org>
parents:
30482
diff
changeset
|
3148 If ASCENT is `center' the image is vertically centered around a |
29151 | 3149 centerline which is the vertical center of text drawn at the position |
3150 of the image, in the manner specified by the text properties and | |
3151 overlays that apply to the image. | |
25853 | 3152 |
3153 `:margin MARGIN' | |
3154 | |
26264 | 3155 MARGIN must be a number >= 0 specifying how many pixels to put as |
25853 | 3156 margin around the image. Default is 0. |
3157 | |
3158 `:relief RELIEF' | |
3159 | |
3160 RELIEF is analogous to the `:relief' attribute of faces. Puts a relief | |
3161 around an image. | |
3162 | |
3163 `:algorithm ALGO' | |
3164 | |
31636 | 3165 Apply an image algorithm to the image before displaying it. |
3166 | |
3167 ALGO `laplace' or `emboss' means apply a Laplace or ``emboss'' | |
3168 edge-detection algorithm to the image. | |
3169 | |
3170 ALGO `(edge-detection :matrix MATRIX :color-adjust ADJUST)' means | |
3171 apply a general edge-detection algorithm. MATRIX must be either a | |
3172 nine-element list or a nine-element vector of numbers. A pixel at | |
3173 position x/y in the transformed image is computed from original pixels | |
3174 around that position. MATRIX specifies, for each pixel in the | |
3175 neighborhood of x/y, a factor with which that pixel will influence the | |
3176 transformed pixel; element 0 specifies the factor for the pixel at | |
3177 x-1/y-1, element 1 the factor for the pixel at x/y-1 etc. as shown | |
3178 below. | |
3179 | |
3180 (x-1/y-1 x/y-1 x+1/y-1 | |
3181 x-1/y x/y x+1/y | |
3182 x-1/y+1 x/y+1 x+1/y+1) | |
3183 | |
3184 The resulting pixel is computed from the color intensity of the color | |
3185 resulting from summing up the RGB values of surrounding pixels, | |
3186 multiplied by the specified factors, and dividing that sum by the sum | |
3187 of the factors' absolute values. | |
3188 | |
31858
269d69b69fe4
Update hideshow.el section.
Thien-Thi Nguyen <ttn@gnuvola.org>
parents:
31827
diff
changeset
|
3189 Laplace edge-detection currently uses a matrix of |
31636 | 3190 |
3191 (1 0 0 | |
3192 0 0 0 | |
3193 9 9 -1) | |
3194 | |
3195 Emboss edge-detection uses a matrix of | |
3196 | |
3197 ( 2 -1 0 | |
3198 -1 0 1 | |
3199 0 1 -2) | |
3200 | |
31728 | 3201 ALGO `disabled' means transform the image so that it looks |
3202 ``disabled''. | |
3203 | |
31636 | 3204 `:mask MASK' |
3205 | |
3206 If MASK is `heuristic' or `(heuristic BG)', build a clipping mask for | |
3207 the image, so that the background of a frame is visible behind the | |
3208 image. If BG is not specified, or if BG is t, determine the | |
3209 background color of the image by looking at the 4 corners of the | |
3210 image, assuming the most frequently occuring color from the corners is | |
3211 the background color of the image. Otherwise, BG must be a list `(RED | |
3212 GREEN BLUE)' specifying the color to assume for the background of the | |
3213 image. | |
3214 | |
3215 If MASK is nil, remove a mask from the image, if it has one. Images | |
3216 in some formats include a mask which can be removed by specifying | |
3217 `:mask nil'. | |
25853 | 3218 |
3219 `:file FILE' | |
3220 | |
3221 Load image from FILE. If FILE is not absolute after expanding it, | |
3222 search for the image in `data-directory'. Some image types support | |
3223 building images from data. When this is done, no `:file' property | |
3224 may be present in the image specification. | |
3225 | |
27076
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3226 `:data DATA' |
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3227 |
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3228 Get image data from DATA. (As of this writing, this is not yet |
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3229 supported for image type `postscript'). Either :file or :data may be |
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3230 present in an image specification, but not both. All image types |
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3231 support strings as DATA, some types allow additional types of DATA. |
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3232 |
25853 | 3233 *** Supported image types |
3234 | |
26034 | 3235 **** XBM, image type `xbm'. |
25853 | 3236 |
3237 XBM images don't require an external library. Additional image | |
3238 properties supported are | |
3239 | |
3240 `:foreground FG' | |
3241 | |
3242 FG must be a string specifying the image foreground color. Default | |
3243 is the frame's foreground. | |
3244 | |
3245 `:background FG' | |
3246 | |
3247 BG must be a string specifying the image foreground color. Default is | |
3248 the frame's background color. | |
3249 | |
3250 XBM images can be constructed from data instead of file. In this | |
3251 case, the image specification must contain the following properties | |
3252 instead of a `:file' property. | |
3253 | |
3254 `:width WIDTH' | |
3255 | |
3256 WIDTH specifies the width of the image in pixels. | |
3257 | |
3258 `:height HEIGHT' | |
3259 | |
3260 HEIGHT specifies the height of the image in pixels. | |
3261 | |
3262 `:data DATA' | |
3263 | |
3264 DATA must be either | |
3265 | |
3266 1. a string large enough to hold the bitmap data, i.e. it must | |
3267 have a size >= (WIDTH + 7) / 8 * HEIGHT | |
3268 | |
3269 2. a bool-vector of size >= WIDTH * HEIGHT | |
3270 | |
3271 3. a vector of strings or bool-vectors, one for each line of the | |
3272 bitmap. | |
3273 | |
28748 | 3274 4. a string that's an in-memory XBM file. Neither width nor |
3275 height may be specified in this case because these are defined | |
3276 in the file. | |
3277 | |
25853 | 3278 **** XPM, image type `xpm' |
3279 | |
3280 XPM images require the external library `libXpm', package | |
3281 `xpm-3.4k.tar.gz', version 3.4k or later. Make sure the library is | |
3282 found when Emacs is configured by supplying appropriate paths via | |
3283 `--x-includes' and `--x-libraries'. | |
3284 | |
3285 Additional image properties supported are: | |
3286 | |
3287 `:color-symbols SYMBOLS' | |
3288 | |
3289 SYMBOLS must be a list of pairs (NAME . COLOR), with NAME being the | |
3290 name of color as it appears in an XPM file, and COLOR being an X color | |
3291 name. | |
3292 | |
3293 XPM images can be built from memory instead of files. In that case, | |
3294 add a `:data' property instead of a `:file' property. | |
3295 | |
3296 The XPM library uses libz in its implementation so that it is able | |
3297 to display compressed images. | |
3298 | |
3299 **** PBM, image type `pbm' | |
3300 | |
3301 PBM images don't require an external library. Color, gray-scale and | |
3302 mono images are supported. There are no additional image properties | |
3303 defined. | |
3304 | |
3305 **** JPEG, image type `jpeg' | |
3306 | |
3307 Support for JPEG images requires the external library `libjpeg', | |
27055 | 3308 package `jpegsrc.v6a.tar.gz', or later. Additional image properties |
3309 are: | |
3310 | |
25853 | 3311 **** TIFF, image type `tiff' |
3312 | |
3313 Support for TIFF images requires the external library `libtiff', | |
3314 package `tiff-v3.4-tar.gz', or later. There are no additional image | |
3315 properties defined. | |
3316 | |
3317 **** GIF, image type `gif' | |
3318 | |
3319 Support for GIF images requires the external library `libungif', package | |
3320 `libungif-4.1.0', or later. | |
3321 | |
3322 Additional image properties supported are: | |
3323 | |
3324 `:index INDEX' | |
3325 | |
3326 INDEX must be an integer >= 0. Load image number INDEX from a | |
3327 multi-image GIF file. An error is signalled if INDEX is too large. | |
3328 | |
3329 This could be used to implement limited support for animated GIFs. | |
3330 For example, the following function displays a multi-image GIF file | |
3331 at point-min in the current buffer, switching between sub-images | |
3332 every 0.1 seconds. | |
3333 | |
3334 (defun show-anim (file max) | |
3335 "Display multi-image GIF file FILE which contains MAX subimages." | |
3336 (display-anim (current-buffer) file 0 max t)) | |
3337 | |
3338 (defun display-anim (buffer file idx max first-time) | |
3339 (when (= idx max) | |
3340 (setq idx 0)) | |
27076
40c18bc759e9
Change description of :data for images.
Gerd Moellmann <gerd@gnu.org>
parents:
27055
diff
changeset
|
3341 (let ((img (create-image file nil nil :index idx))) |
25853 | 3342 (save-excursion |
3343 (set-buffer buffer) | |
3344 (goto-char (point-min)) | |
3345 (unless first-time (delete-char 1)) | |
3346 (insert-image img "x")) | |
3347 (run-with-timer 0.1 nil 'display-anim buffer file (1+ idx) max nil))) | |
3348 | |
3349 **** PNG, image type `png' | |
3350 | |
3351 Support for PNG images requires the external library `libpng', | |
3352 package `libpng-1.0.2.tar.gz', or later. There are no additional image | |
3353 properties defined. | |
3354 | |
3355 **** Ghostscript, image type `postscript'. | |
3356 | |
3357 Additional image properties supported are: | |
3358 | |
3359 `:pt-width WIDTH' | |
3360 | |
3361 WIDTH is width of the image in pt (1/72 inch). WIDTH must be an | |
26034 | 3362 integer. This is a required property. |
25853 | 3363 |
3364 `:pt-height HEIGHT' | |
3365 | |
3366 HEIGHT specifies the height of the image in pt (1/72 inch). HEIGHT | |
26034 | 3367 must be a integer. This is an required property. |
25853 | 3368 |
3369 `:bounding-box BOX' | |
3370 | |
3371 BOX must be a list or vector of 4 integers giving the bounding box of | |
3372 the PS image, analogous to the `BoundingBox' comment found in PS | |
3373 files. This is an required property. | |
3374 | |
3375 Part of the Ghostscript interface is implemented in Lisp. See | |
3376 lisp/gs.el. | |
3377 | |
3378 *** Lisp interface. | |
3379 | |
26264 | 3380 The variable `image-types' contains a list of those image types |
3381 which are supported in the current configuration. | |
25853 | 3382 |
3383 Images are stored in an image cache and removed from the cache when | |
3384 they haven't been displayed for `image-cache-eviction-delay seconds. | |
3385 The function `clear-image-cache' can be used to clear the image cache | |
28759 | 3386 manually. Images in the cache are compared with `equal', i.e. all |
3387 images with `equal' specifications share the same image. | |
25853 | 3388 |
3389 *** Simplified image API, image.el | |
3390 | |
3391 The new Lisp package image.el contains functions that simplify image | |
3392 creation and putting images into text. The function `create-image' | |
3393 can be used to create images. The macro `defimage' can be used to | |
3394 define an image based on available image types. The functions | |
3395 `put-image' and `insert-image' can be used to insert an image into a | |
3396 buffer. | |
3397 | |
3398 +++ | |
3399 ** Display margins. | |
3400 | |
3401 Windows can now have margins which are used for special text | |
3402 and images. | |
3403 | |
3404 To give a window margins, either set the buffer-local variables | |
3405 `left-margin-width' and `right-margin-width', or call | |
3406 `set-window-margins'. The function `window-margins' can be used to | |
3407 obtain the current settings. To make `left-margin-width' and | |
3408 `right-margin-width' take effect, you must set them before displaying | |
3409 the buffer in a window, or use `set-window-buffer' to force an update | |
3410 of the display margins. | |
3411 | |
3412 You can put text in margins by giving it a `display' text property | |
3413 containing a pair of the form `(LOCATION . VALUE)', where LOCATION is | |
3414 one of `left-margin' or `right-margin' or nil. VALUE can be either a | |
3415 string, an image specification or a stretch specification (see later | |
3416 in this file). | |
3417 | |
3418 +++ | |
3419 ** Help display | |
3420 | |
3421 Emacs displays short help messages in the echo area, when the mouse | |
3422 moves over a tool-bar item or a piece of text that has a text property | |
3423 `help-echo'. This feature also applies to strings in the mode line | |
3424 that have a `help-echo' property. | |
3425 | |
30219 | 3426 If the value of the `help-echo' property is a function, that function |
30305 | 3427 is called with three arguments WINDOW, OBJECT and POSITION. WINDOW is |
30372 | 3428 the window in which the help was found. |
3429 | |
3430 If OBJECT is a buffer, POS is the position in the buffer where the | |
3431 `help-echo' text property was found. | |
3432 | |
3433 If OBJECT is an overlay, that overlay has a `help-echo' property, and | |
3434 POS is the position in the overlay's buffer under the mouse. | |
3435 | |
3436 If OBJECT is a string (an overlay string or a string displayed with | |
30467
26afdae5ea13
--disable-largefile, 64-bit solaris
Dave Love <fx@gnu.org>
parents:
30445
diff
changeset
|
3437 the `display' property), POS is the position in that string under the |
30372 | 3438 mouse. |
30219 | 3439 |
3440 If the value of the `help-echo' property is neither a function nor a | |
3441 string, it is evaluated to obtain a help string. | |
3442 | |
3443 For tool-bar and menu-bar items, their key definition is used to | |
3444 determine the help to display. If their definition contains a | |
3445 property `:help FORM', FORM is evaluated to determine the help string. | |
3446 For tool-bar items without a help form, the caption of the item is | |
3447 used as help string. | |
25853 | 3448 |
3449 The hook `show-help-function' can be set to a function that displays | |
30339
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
3450 the help string differently. For example, enabling a tooltip window |
70d759570f7a
C-down-mouse-3. Move concat change.
Dave Love <fx@gnu.org>
parents:
30319
diff
changeset
|
3451 causes the help display to appear there instead of in the echo area. |
25853 | 3452 |
3453 +++ | |
3454 ** Vertical fractional scrolling. | |
3455 | |
3456 The display of text in windows can be scrolled smoothly in pixels. | |
3457 This is useful, for example, for making parts of large images visible. | |
3458 | |
3459 The function `window-vscroll' returns the current value of vertical | |
3460 scrolling, a non-negative fraction of the canonical character height. | |
3461 The function `set-window-vscroll' can be used to set the vertical | |
3462 scrolling value. Here is an example of how these function might be | |
3463 used. | |
3464 | |
26264 | 3465 (global-set-key [A-down] |
3466 #'(lambda () | |
25853 | 3467 (interactive) |
26264 | 3468 (set-window-vscroll (selected-window) |
25853 | 3469 (+ 0.5 (window-vscroll))))) |
26264 | 3470 (global-set-key [A-up] |
25853 | 3471 #'(lambda () |
3472 (interactive) | |
26264 | 3473 (set-window-vscroll (selected-window) |
25853 | 3474 (- (window-vscroll) 0.5))))) |
3475 | |
3476 +++ | |
3477 ** New hook `fontification-functions'. | |
3478 | |
3479 Functions from `fontification-functions' are called from redisplay | |
3480 when it encounters a region of text that is not yet fontified. This | |
3481 variable automatically becomes buffer-local when set. Each function | |
3482 is called with one argument, POS. | |
3483 | |
3484 At least one of the hook functions should fontify one or more | |
3485 characters starting at POS in the current buffer. It should mark them | |
3486 as fontified by giving them a non-nil value of the `fontified' text | |
3487 property. It may be reasonable for these functions to check for the | |
3488 `fontified' property and not put it back on, but they do not have to. | |
3489 | |
3490 +++ | |
3491 ** Tool bar support. | |
3492 | |
3493 Emacs supports a tool bar at the top of a frame under X. The frame | |
3494 parameter `tool-bar-lines' (X resource "toolBar", class "ToolBar") | |
3495 controls how may lines to reserve for the tool bar. A zero value | |
3496 suppresses the tool bar. If the value is non-zero and | |
3497 `auto-resize-tool-bars' is non-nil the tool bar's size will be changed | |
3498 automatically so that all tool bar items are visible. | |
3499 | |
3500 *** Tool bar item definitions | |
3501 | |
3502 Tool bar items are defined using `define-key' with a prefix-key | |
3503 `tool-bar'. For example `(define-key global-map [tool-bar item1] ITEM)' | |
3504 where ITEM is a list `(menu-item CAPTION BINDING PROPS...)'. | |
26264 | 3505 |
25853 | 3506 CAPTION is the caption of the item, If it's not a string, it is |
3507 evaluated to get a string. The caption is currently not displayed in | |
3508 the tool bar, but it is displayed if the item doesn't have a `:help' | |
3509 property (see below). | |
26264 | 3510 |
25853 | 3511 BINDING is the tool bar item's binding. Tool bar items with keymaps as |
3512 binding are currently ignored. | |
3513 | |
3514 The following properties are recognized: | |
3515 | |
3516 `:enable FORM'. | |
26264 | 3517 |
25853 | 3518 FORM is evaluated and specifies whether the tool bar item is enabled |
3519 or disabled. | |
26264 | 3520 |
25853 | 3521 `:visible FORM' |
26264 | 3522 |
25853 | 3523 FORM is evaluated and specifies whether the tool bar item is displayed. |
26264 | 3524 |
25853 | 3525 `:filter FUNCTION' |
3526 | |
3527 FUNCTION is called with one parameter, the same list BINDING in which | |
3528 FUNCTION is specified as the filter. The value FUNCTION returns is | |
3529 used instead of BINDING to display this item. | |
26264 | 3530 |
25853 | 3531 `:button (TYPE SELECTED)' |
3532 | |
3533 TYPE must be one of `:radio' or `:toggle'. SELECTED is evaluated | |
3534 and specifies whether the button is selected (pressed) or not. | |
26264 | 3535 |
25853 | 3536 `:image IMAGES' |
3537 | |
3538 IMAGES is either a single image specification or a vector of four | |
3539 image specifications. If it is a vector, this table lists the | |
3540 meaning of each of the four elements: | |
3541 | |
3542 Index Use when item is | |
3543 ---------------------------------------- | |
3544 0 enabled and selected | |
3545 1 enabled and deselected | |
3546 2 disabled and selected | |
3547 3 disabled and deselected | |
26264 | 3548 |
28946 | 3549 If IMAGE is a single image specification, a Laplace edge-detection |
3550 algorithm is used on that image to draw the image in disabled state. | |
3551 | |
25853 | 3552 `:help HELP-STRING'. |
26264 | 3553 |
25853 | 3554 Gives a help string to display for the tool bar item. This help |
3555 is displayed when the mouse is moved over the item. | |
3556 | |
31641 | 3557 The function `toolbar-add-item' is a convenience function for adding |
31741 | 3558 toolbar items generally, and `tool-bar-add-item-from-menu' can be used |
3559 to define a toolbar item with a binding copied from an item on the | |
3560 menu bar. | |
31641 | 3561 |
25853 | 3562 *** Tool-bar-related variables. |
3563 | |
3564 If `auto-resize-tool-bar' is non-nil, the tool bar will automatically | |
3565 resize to show all defined tool bar items. It will never grow larger | |
3566 than 1/4 of the frame's size. | |
3567 | |
26264 | 3568 If `auto-raise-tool-bar-buttons' is non-nil, tool bar buttons will be |
25853 | 3569 raised when the mouse moves over them. |
3570 | |
3571 You can add extra space between tool bar items by setting | |
3572 `tool-bar-button-margin' to a positive integer specifying a number of | |
3573 pixels. Default is 1. | |
3574 | |
3575 You can change the shadow thickness of tool bar buttons by setting | |
3576 `tool-bar-button-relief' to an integer. Default is 3. | |
3577 | |
3578 *** Tool-bar clicks with modifiers. | |
3579 | |
3580 You can bind commands to clicks with control, shift, meta etc. on | |
26264 | 3581 a tool bar item. If |
25853 | 3582 |
3583 (define-key global-map [tool-bar shell] | |
3584 '(menu-item "Shell" shell | |
3585 :image (image :type xpm :file "shell.xpm"))) | |
3586 | |
3587 is the original tool bar item definition, then | |
3588 | |
3589 (define-key global-map [tool-bar S-shell] 'some-command) | |
3590 | |
3591 makes a binding to run `some-command' for a shifted click on the same | |
3592 item. | |
3593 | |
3594 ** Mode line changes. | |
3595 | |
3596 +++ | |
3597 *** Mouse-sensitive mode line. | |
3598 | |
3599 The mode line can be made mouse-sensitive by displaying strings there | |
3600 that have a `local-map' text property. There are three ways to display | |
3601 a string with a `local-map' property in the mode line. | |
3602 | |
3603 1. The mode line spec contains a variable whose string value has | |
3604 a `local-map' text property. | |
3605 | |
3606 2. The mode line spec contains a format specifier (e.g. `%12b'), and | |
3607 that format specifier has a `local-map' property. | |
3608 | |
3609 3. The mode line spec contains a list containing `:eval FORM'. FORM | |
3610 is evaluated. If the result is a string, and that string has a | |
3611 `local-map' property. | |
3612 | |
3613 The same mechanism is used to determine the `face' and `help-echo' | |
3614 properties of strings in the mode line. See `bindings.el' for an | |
3615 example. | |
3616 | |
26359
d2970b5d3b72
Add mode line element '(:eval FORM)'.
Gerd Moellmann <gerd@gnu.org>
parents:
26322
diff
changeset
|
3617 *** If a mode line element has the form `(:eval FORM)', FORM is |
d2970b5d3b72
Add mode line element '(:eval FORM)'.
Gerd Moellmann <gerd@gnu.org>
parents:
26322
diff
changeset
|
3618 evaluated and the result is used as mode line element. |
d2970b5d3b72
Add mode line element '(:eval FORM)'.
Gerd Moellmann <gerd@gnu.org>
parents:
26322
diff
changeset
|
3619 |
25853 | 3620 +++ |
3621 *** You can suppress mode-line display by setting the buffer-local | |
3622 variable mode-line-format to nil. | |
3623 | |
3624 +++ | |
3625 *** A headerline can now be displayed at the top of a window. | |
3626 | |
3627 This mode line's contents are controlled by the new variable | |
3628 `header-line-format' and `default-header-line-format' which are | |
3629 completely analogous to `mode-line-format' and | |
3630 `default-mode-line-format'. A value of nil means don't display a top | |
3631 line. | |
3632 | |
3633 The appearance of top mode lines is controlled by the face | |
3634 `header-line'. | |
3635 | |
3636 The function `coordinates-in-window-p' returns `header-line' for a | |
3637 position in the header-line. | |
3638 | |
3639 +++ | |
3640 ** Text property `display' | |
3641 | |
31827 | 3642 The `display' text property is used to insert images into text, |
3643 replace text with other text, display text in marginal area, and it is | |
3644 also used to control other aspects of how text displays. The value of | |
3645 the `display' property should be a display specification, as described | |
25853 | 3646 below, or a list or vector containing display specifications. |
3647 | |
31827 | 3648 *** Replacing text, displaying text in marginal areas |
3649 | |
3650 To replace the text having the `display' property with some other | |
3651 text, use a display specification of the form `(LOCATION STRING)'. | |
3652 | |
3653 If LOCATION is `(margin left-margin)', STRING is displayed in the left | |
3654 marginal area, if it is `(margin right-margin)', it is displayed in | |
3655 the right marginal area, and if LOCATION is `(margin nil)' STRING | |
3656 is displayed in the text. In the latter case you can also use the | |
3657 simpler form STRING as property value. | |
3658 | |
25853 | 3659 *** Variable width and height spaces |
3660 | |
3661 To display a space of fractional width or height, use a display | |
3662 specification of the form `(LOCATION STRECH)'. If LOCATION is | |
3663 `(margin left-margin)', the space is displayed in the left marginal | |
3664 area, if it is `(margin right-margin)', it is displayed in the right | |
3665 marginal area, and if LOCATION is `(margin nil)' the space is | |
3666 displayed in the text. In the latter case you can also use the | |
3667 simpler form STRETCH as property value. | |
3668 | |
3669 The stretch specification STRETCH itself is a list of the form `(space | |
3670 PROPS)', where PROPS is a property list which can contain the | |
3671 properties described below. | |
3672 | |
3673 The display of the fractional space replaces the display of the | |
3674 characters having the `display' property. | |
3675 | |
3676 - :width WIDTH | |
3677 | |
3678 Specifies that the space width should be WIDTH times the normal | |
3679 character width. WIDTH can be an integer or floating point number. | |
3680 | |
3681 - :relative-width FACTOR | |
3682 | |
3683 Specifies that the width of the stretch should be computed from the | |
3684 first character in a group of consecutive characters that have the | |
3685 same `display' property. The computation is done by multiplying the | |
3686 width of that character by FACTOR. | |
3687 | |
3688 - :align-to HPOS | |
3689 | |
3690 Specifies that the space should be wide enough to reach HPOS. The | |
3691 value HPOS is measured in units of the normal character width. | |
3692 | |
3693 Exactly one of the above properties should be used. | |
3694 | |
3695 - :height HEIGHT | |
3696 | |
3697 Specifies the height of the space, as HEIGHT, measured in terms of the | |
3698 normal line height. | |
3699 | |
3700 - :relative-height FACTOR | |
3701 | |
3702 The height of the space is computed as the product of the height | |
3703 of the text having the `display' property and FACTOR. | |
3704 | |
3705 - :ascent ASCENT | |
3706 | |
3707 Specifies that ASCENT percent of the height of the stretch should be | |
3708 used for the ascent of the stretch, i.e. for the part above the | |
3709 baseline. The value of ASCENT must be a non-negative number less or | |
3710 equal to 100. | |
3711 | |
3712 You should not use both `:height' and `:relative-height' together. | |
3713 | |
3714 *** Images | |
3715 | |
3716 A display specification for an image has the form `(LOCATION | |
3717 . IMAGE)', where IMAGE is an image specification. The image replaces, | |
3718 in the display, the characters having this display specification in | |
3719 their `display' text property. If LOCATION is `(margin left-margin)', | |
3720 the image will be displayed in the left marginal area, if it is | |
3721 `(margin right-margin)' it will be displayed in the right marginal | |
3722 area, and if LOCATION is `(margin nil)' the image will be displayed in | |
3723 the text. In the latter case you can also use the simpler form IMAGE | |
3724 as display specification. | |
3725 | |
3726 *** Other display properties | |
3727 | |
3728 - :space-width FACTOR | |
3729 | |
3730 Specifies that space characters in the text having that property | |
3731 should be displayed FACTOR times as wide as normal; FACTOR must be an | |
3732 integer or float. | |
3733 | |
3734 - :height HEIGHT | |
3735 | |
3736 Display text having this property in a font that is smaller or larger. | |
3737 | |
3738 If HEIGHT is a list of the form `(+ N)', where N is an integer, that | |
3739 means to use a font that is N steps larger. If HEIGHT is a list of | |
3740 the form `(- N)', that means to use a font that is N steps smaller. A | |
3741 ``step'' is defined by the set of available fonts; each size for which | |
3742 a font is available counts as a step. | |
3743 | |
3744 If HEIGHT is a number, that means to use a font that is HEIGHT times | |
3745 as tall as the frame's default font. | |
3746 | |
3747 If HEIGHT is a symbol, it is called as a function with the current | |
3748 height as argument. The function should return the new height to use. | |
3749 | |
3750 Otherwise, HEIGHT is evaluated to get the new height, with the symbol | |
3751 `height' bound to the current specified font height. | |
3752 | |
3753 - :raise FACTOR | |
3754 | |
3755 FACTOR must be a number, specifying a multiple of the current | |
3756 font's height. If it is positive, that means to display the characters | |
3757 raised. If it is negative, that means to display them lower down. The | |
3758 amount of raising or lowering is computed without taking account of the | |
3759 `:height' subproperty. | |
3760 | |
3761 *** Conditional display properties | |
3762 | |
3763 All display specifications can be conditionalized. If a specification | |
3764 has the form `(:when CONDITION . SPEC)', the specification SPEC | |
3765 applies only when CONDITION yields a non-nil value when evaluated. | |
3766 During evaluattion, point is temporarily set to the end position of | |
3767 the text having the `display' property. | |
3768 | |
3769 The normal specification consisting of SPEC only is equivalent to | |
3770 `(:when t SPEC)'. | |
3771 | |
3772 +++ | |
3773 ** New menu separator types. | |
3774 | |
3775 Emacs now supports more than one menu separator type. Menu items with | |
3776 item names consisting of dashes only (including zero dashes) are | |
3777 treated like before. In addition, the following item names are used | |
3778 to specify other menu separator types. | |
3779 | |
3780 - `--no-line' or `--space', or `--:space', or `--:noLine' | |
3781 | |
3782 No separator lines are drawn, but a small space is inserted where the | |
3783 separator occurs. | |
3784 | |
3785 - `--single-line' or `--:singleLine' | |
3786 | |
3787 A single line in the menu's foreground color. | |
3788 | |
3789 - `--double-line' or `--:doubleLine' | |
3790 | |
3791 A double line in the menu's foreground color. | |
3792 | |
3793 - `--single-dashed-line' or `--:singleDashedLine' | |
3794 | |
3795 A single dashed line in the menu's foreground color. | |
3796 | |
3797 - `--double-dashed-line' or `--:doubleDashedLine' | |
3798 | |
3799 A double dashed line in the menu's foreground color. | |
3800 | |
3801 - `--shadow-etched-in' or `--:shadowEtchedIn' | |
3802 | |
3803 A single line with 3D sunken appearance. This is the the form | |
3804 displayed for item names consisting of dashes only. | |
3805 | |
3806 - `--shadow-etched-out' or `--:shadowEtchedOut' | |
3807 | |
3808 A single line with 3D raised appearance. | |
3809 | |
3810 - `--shadow-etched-in-dash' or `--:shadowEtchedInDash' | |
3811 | |
3812 A single dashed line with 3D sunken appearance. | |
3813 | |
3814 - `--shadow-etched-out-dash' or `--:shadowEtchedOutDash' | |
3815 | |
3816 A single dashed line with 3D raise appearance. | |
3817 | |
3818 - `--shadow-double-etched-in' or `--:shadowDoubleEtchedIn' | |
3819 | |
3820 Two lines with 3D sunken appearance. | |
3821 | |
3822 - `--shadow-double-etched-out' or `--:shadowDoubleEtchedOut' | |
3823 | |
3824 Two lines with 3D raised appearance. | |
3825 | |
3826 - `--shadow-double-etched-in-dash' or `--:shadowDoubleEtchedInDash' | |
3827 | |
3828 Two dashed lines with 3D sunken appearance. | |
3829 | |
3830 - `--shadow-double-etched-out-dash' or `--:shadowDoubleEtchedOutDash' | |
3831 | |
3832 Two dashed lines with 3D raised appearance. | |
3833 | |
3834 Under LessTif/Motif, the last four separator types are displayed like | |
3835 the corresponding single-line separators. | |
3836 | |
3837 +++ | |
3838 ** New frame parameters for scroll bar colors. | |
3839 | |
3840 The new frame parameters `scroll-bar-foreground' and | |
3841 `scroll-bar-background' can be used to change scroll bar colors. | |
3842 Their value must be either a color name, a string, or nil to specify | |
3843 that scroll bars should use a default color. For toolkit scroll bars, | |
3844 default colors are toolkit specific. For non-toolkit scroll bars, the | |
3845 default background is the background color of the frame, and the | |
3846 default foreground is black. | |
3847 | |
3848 The X resource name of these parameters are `scrollBarForeground' | |
3849 (class ScrollBarForeground) and `scrollBarBackground' (class | |
3850 `ScrollBarBackground'). | |
3851 | |
3852 Setting these parameters overrides toolkit specific X resource | |
3853 settings for scroll bar colors. | |
3854 | |
3855 +++ | |
3856 ** You can set `redisplay-dont-pause' to a non-nil value to prevent | |
3857 display updates from being interrupted when input is pending. | |
3858 | |
3859 --- | |
3860 ** Changing a window's width may now change its window start if it | |
3861 starts on a continuation line. The new window start is computed based | |
3862 on the window's new width, starting from the start of the continued | |
3863 line as the start of the screen line with the minimum distance from | |
3864 the original window start. | |
3865 | |
3866 --- | |
3867 ** The variable `hscroll-step' and the functions | |
3868 `hscroll-point-visible' and `hscroll-window-column' have been removed | |
3869 now that proper horizontal scrolling is implemented. | |
3870 | |
3871 +++ | |
3872 ** Windows can now be made fixed-width and/or fixed-height. | |
3873 | |
3874 A window is fixed-size if its buffer has a buffer-local variable | |
3875 `window-size-fixed' whose value is not nil. A value of `height' makes | |
3876 windows fixed-height, a value of `width' makes them fixed-width, any | |
3877 other non-nil value makes them both fixed-width and fixed-height. | |
3878 | |
3879 The following code makes all windows displaying the current buffer | |
3880 fixed-width and fixed-height. | |
3881 | |
3882 (set (make-local-variable 'window-size-fixed) t) | |
3883 | |
3884 A call to enlarge-window on a window gives an error if that window is | |
3885 fixed-width and it is tried to change the window's width, or if the | |
3886 window is fixed-height, and it is tried to change its height. To | |
3887 change the size of a fixed-size window, bind `window-size-fixed' | |
3888 temporarily to nil, for example | |
3889 | |
3890 (let ((window-size-fixed nil)) | |
3891 (enlarge-window 10)) | |
3892 | |
26264 | 3893 Likewise, an attempt to split a fixed-height window vertically, |
25853 | 3894 or a fixed-width window horizontally results in a error. |
28094
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3895 |
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3896 ** The cursor-type frame parameter is now supported on MS-DOS |
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3897 terminals. When Emacs starts, it by default changes the cursor shape |
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3898 to a solid box, as it does on Unix. The `cursor-type' frame parameter |
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3899 overrides this as it does on Unix, except that the bar cursor is |
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3900 horizontal rather than vertical (since the MS-DOS display doesn't |
e1e48e0663f6
Mention cursor-type support on MS-DOS terminals.
Eli Zaretskii <eliz@gnu.org>
parents:
28063
diff
changeset
|
3901 support a vertical-bar cursor). |
30786 | 3902 |
30922 | 3903 |
3904 ^L | |
3905 * Emacs 20.7 is a bug-fix release with few user-visible changes | |
3906 | |
3907 ** It is now possible to use CCL-based coding systems for keyboard | |
3908 input. | |
3909 | |
3910 ** ange-ftp now handles FTP security extensions, like Kerberos. | |
3911 | |
3912 ** Rmail has been extended to recognize more forms of digest messages. | |
3913 | |
3914 ** Now, most coding systems set in keyboard coding system work not | |
3915 only for character input, but also in incremental search. The | |
3916 exceptions are such coding systems that handle 2-byte character sets | |
3917 (e.g euc-kr, euc-jp) and that use ISO's escape sequence | |
3918 (e.g. iso-2022-jp). They are ignored in incremental search. | |
3919 | |
3920 ** Support for Macintosh PowerPC-based machines running GNU/Linux has | |
3921 been added. | |
3922 | |
3923 ^L | |
3924 * Emacs 20.6 is a bug-fix release with one user-visible change | |
3925 | |
3926 ** Support for ARM-based non-RISCiX machines has been added. | |
3927 | |
3928 ^L | |
3929 * Emacs 20.5 is a bug-fix release with no user-visible changes. | |
3930 | |
3931 ** Not new, but not mentioned before: | |
3932 M-w when Transient Mark mode is enabled disables the mark. | |
25853 | 3933 |
30922 | 3934 * Changes in Emacs 20.4 |
3935 | |
3936 ** Init file may be called .emacs.el. | |
3937 | |
3938 You can now call the Emacs init file `.emacs.el'. | |
3939 Formerly the name had to be `.emacs'. If you use the name | |
3940 `.emacs.el', you can byte-compile the file in the usual way. | |
3941 | |
3942 If both `.emacs' and `.emacs.el' exist, the latter file | |
3943 is the one that is used. | |
3944 | |
3945 ** shell-command, and shell-command-on-region, now return | |
3946 the exit code of the command (unless it is asynchronous). | |
3947 Also, you can specify a place to put the error output, | |
3948 separate from the command's regular output. | |
3949 Interactively, the variable shell-command-default-error-buffer | |
3950 says where to put error output; set it to a buffer name. | |
3951 In calls from Lisp, an optional argument ERROR-BUFFER specifies | |
3952 the buffer name. | |
3953 | |
3954 When you specify a non-nil error buffer (or buffer name), any error | |
3955 output is inserted before point in that buffer, with \f\n to separate | |
3956 it from the previous batch of error output. The error buffer is not | |
3957 cleared, so error output from successive commands accumulates there. | |
3958 | |
3959 ** Setting the default value of enable-multibyte-characters to nil in | |
3960 the .emacs file, either explicitly using setq-default, or via Custom, | |
3961 is now essentially equivalent to using --unibyte: all buffers | |
3962 created during startup will be made unibyte after loading .emacs. | |
3963 | |
3964 ** C-x C-f now handles the wildcards * and ? in file names. For | |
3965 example, typing C-x C-f c*.c RET visits all the files whose names | |
3966 match c*.c. To visit a file whose name contains * or ?, add the | |
3967 quoting sequence /: to the beginning of the file name. | |
3968 | |
3969 ** The M-x commands keep-lines, flush-lines and count-matches | |
3970 now have the same feature as occur and query-replace: | |
3971 if the pattern contains any upper case letters, then | |
3972 they never ignore case. | |
3973 | |
3974 ** The end-of-line format conversion feature previously mentioned | |
3975 under `* Emacs 20.1 changes for MS-DOS and MS-Windows' actually | |
3976 applies to all operating systems. Emacs recognizes from the contents | |
3977 of a file what convention it uses to separate lines--newline, CRLF, or | |
3978 just CR--and automatically converts the contents to the normal Emacs | |
3979 convention (using newline to separate lines) for editing. This is a | |
3980 part of the general feature of coding system conversion. | |
3981 | |
3982 If you subsequently save the buffer, Emacs converts the text back to | |
3983 the same format that was used in the file before. | |
3984 | |
3985 You can turn off end-of-line conversion by setting the variable | |
3986 `inhibit-eol-conversion' to non-nil, e.g. with Custom in the MULE group. | |
3987 | |
3988 ** The character set property `prefered-coding-system' has been | |
3989 renamed to `preferred-coding-system', for the sake of correct spelling. | |
3990 This is a fairly internal feature, so few programs should be affected. | |
3991 | |
3992 ** Mode-line display of end-of-line format is changed. | |
3993 The indication of the end-of-line format of the file visited by a | |
3994 buffer is now more explicit when that format is not the usual one for | |
3995 your operating system. For example, the DOS-style end-of-line format | |
3996 is displayed as "(DOS)" on Unix and GNU/Linux systems. The usual | |
3997 end-of-line format is still displayed as a single character (colon for | |
3998 Unix, backslash for DOS and Windows, and forward slash for the Mac). | |
3999 | |
4000 The values of the variables eol-mnemonic-unix, eol-mnemonic-dos, | |
4001 eol-mnemonic-mac, and eol-mnemonic-undecided, which are strings, | |
4002 control what is displayed in the mode line for each end-of-line | |
4003 format. You can now customize these variables. | |
4004 | |
4005 ** In the previous version of Emacs, tar-mode didn't work well if a | |
4006 filename contained non-ASCII characters. Now this is fixed. Such a | |
4007 filename is decoded by file-name-coding-system if the default value of | |
4008 enable-multibyte-characters is non-nil. | |
4009 | |
4010 ** The command temp-buffer-resize-mode toggles a minor mode | |
4011 in which temporary buffers (such as help buffers) are given | |
4012 windows just big enough to hold the whole contents. | |
4013 | |
4014 ** If you use completion.el, you must now run the function | |
4015 dynamic-completion-mode to enable it. Just loading the file | |
4016 doesn't have any effect. | |
4017 | |
4018 ** In Flyspell mode, the default is now to make just one Ispell process, | |
4019 not one per buffer. | |
4020 | |
4021 ** If you use iswitchb but do not call (iswitchb-default-keybindings) to | |
4022 use the default keybindings, you will need to add the following line: | |
4023 (add-hook 'minibuffer-setup-hook 'iswitchb-minibuffer-setup) | |
4024 | |
4025 ** Auto-show mode is no longer enabled just by loading auto-show.el. | |
4026 To control it, set `auto-show-mode' via Custom or use the | |
4027 `auto-show-mode' command. | |
4028 | |
4029 ** Handling of X fonts' ascent/descent parameters has been changed to | |
4030 avoid redisplay problems. As a consequence, compared with previous | |
4031 versions the line spacing and frame size now differ with some font | |
4032 choices, typically increasing by a pixel per line. This change | |
4033 occurred in version 20.3 but was not documented then. | |
4034 | |
4035 ** If you select the bar cursor style, it uses the frame's | |
4036 cursor-color, rather than the cursor foreground pixel. | |
4037 | |
4038 ** In multibyte mode, Rmail decodes incoming MIME messages using the | |
4039 character set specified in the message. If you want to disable this | |
4040 feature, set the variable rmail-decode-mime-charset to nil. | |
4041 | |
4042 ** Not new, but not mentioned previously in NEWS: when you use #! at | |
4043 the beginning of a file to make it executable and specify an | |
4044 interpreter program, Emacs looks on the second line for the -*- mode | |
4045 and variable specification, as well as on the first line. | |
4046 | |
4047 ** Support for IBM codepage encoding of non-ASCII characters. | |
4048 | |
4049 The new command M-x codepage-setup creates a special coding system | |
4050 that can be used to convert text between a specific IBM codepage and | |
4051 one of the character sets built into Emacs which matches that | |
4052 codepage. For example, codepage 850 corresponds to Latin-1 character | |
4053 set, codepage 855 corresponds to Cyrillic-ISO character set, etc. | |
4054 | |
4055 Windows codepages 1250, 1251 and some others, where Windows deviates | |
4056 from the corresponding ISO character set, are also supported. | |
4057 | |
4058 IBM box-drawing characters and other glyphs which don't have | |
4059 equivalents in the corresponding ISO character set, are converted to | |
4060 a character defined by dos-unsupported-char-glyph on MS-DOS, and to | |
4061 `?' on other systems. | |
4062 | |
4063 IBM codepages are widely used on MS-DOS and MS-Windows, so this | |
4064 feature is most useful on those platforms, but it can also be used on | |
4065 Unix. | |
4066 | |
4067 Emacs compiled for MS-DOS automatically loads the support for the | |
4068 current codepage when it starts. | |
4069 | |
4070 ** Mail changes | |
4071 | |
4072 *** When mail is sent using compose-mail (C-x m), and if | |
4073 `mail-send-nonascii' is set to the new default value `mime', | |
4074 appropriate MIME headers are added. The headers are added only if | |
4075 non-ASCII characters are present in the body of the mail, and no other | |
4076 MIME headers are already present. For example, the following three | |
4077 headers are added if the coding system used in the *mail* buffer is | |
4078 latin-1: | |
4079 | |
4080 MIME-version: 1.0 | |
4081 Content-type: text/plain; charset=iso-8859-1 | |
4082 Content-Transfer-Encoding: 8bit | |
4083 | |
4084 *** The new variable default-sendmail-coding-system specifies the | |
4085 default way to encode outgoing mail. This has higher priority than | |
4086 default-buffer-file-coding-system but has lower priority than | |
4087 sendmail-coding-system and the local value of | |
4088 buffer-file-coding-system. | |
4089 | |
4090 You should not set this variable manually. Instead, set | |
4091 sendmail-coding-system to specify a fixed encoding for all outgoing | |
4092 mail. | |
4093 | |
4094 *** When you try to send a message that contains non-ASCII characters, | |
4095 if the coding system specified by those variables doesn't handle them, | |
4096 Emacs will ask you to select a suitable coding system while showing a | |
4097 list of possible coding systems. | |
4098 | |
4099 ** CC Mode changes | |
4100 | |
4101 *** c-default-style can now take an association list that maps major | |
4102 modes to style names. When this variable is an alist, Java mode no | |
4103 longer hardcodes a setting to "java" style. See the variable's | |
4104 docstring for details. | |
4105 | |
4106 *** It's now possible to put a list as the offset on a syntactic | |
4107 symbol. The list is evaluated recursively until a non-nil offset is | |
4108 found. This is useful to combine several lineup functions to act in a | |
4109 prioritized order on a single line. However, none of the supplied | |
4110 lineup functions use this feature currently. | |
4111 | |
4112 *** New syntactic symbol catch-clause, which is used on the "catch" and | |
4113 "finally" lines in try-catch constructs in C++ and Java. | |
4114 | |
4115 *** New cleanup brace-catch-brace on c-cleanup-list, which does for | |
4116 "catch" lines what brace-elseif-brace does for "else if" lines. | |
4117 | |
4118 *** The braces of Java anonymous inner classes are treated separately | |
4119 from the braces of other classes in auto-newline mode. Two new | |
4120 symbols inexpr-class-open and inexpr-class-close may be used on | |
4121 c-hanging-braces-alist to control the automatic newlines used for | |
4122 anonymous classes. | |
4123 | |
4124 *** Support for the Pike language added, along with new Pike specific | |
4125 syntactic symbols: inlambda, lambda-intro-cont | |
4126 | |
4127 *** Support for Java anonymous classes via new syntactic symbol | |
4128 inexpr-class. New syntactic symbol inexpr-statement for Pike | |
4129 support and gcc-style statements inside expressions. New lineup | |
4130 function c-lineup-inexpr-block. | |
4131 | |
4132 *** New syntactic symbol brace-entry-open which is used in brace lists | |
4133 (i.e. static initializers) when a list entry starts with an open | |
4134 brace. These used to be recognized as brace-list-entry's. | |
4135 c-electric-brace also recognizes brace-entry-open braces | |
4136 (brace-list-entry's can no longer be electrified). | |
4137 | |
4138 *** New command c-indent-line-or-region, not bound by default. | |
4139 | |
4140 *** `#' is only electric when typed in the indentation of a line. | |
4141 | |
4142 *** Parentheses are now electric (via the new command c-electric-paren) | |
4143 for auto-reindenting lines when parens are typed. | |
4144 | |
4145 *** In "gnu" style, inline-open offset is now set to zero. | |
4146 | |
4147 *** Uniform handling of the inclass syntactic symbol. The indentation | |
4148 associated with it is now always relative to the class opening brace. | |
4149 This means that the indentation behavior has changed in some | |
4150 circumstances, but only if you've put anything besides 0 on the | |
4151 class-open syntactic symbol (none of the default styles do that). | |
4152 | |
4153 ** Gnus changes. | |
4154 | |
4155 *** New functionality for using Gnus as an offline newsreader has been | |
4156 added. A plethora of new commands and modes have been added. See the | |
4157 Gnus manual for the full story. | |
4158 | |
4159 *** The nndraft backend has returned, but works differently than | |
4160 before. All Message buffers are now also articles in the nndraft | |
4161 group, which is created automatically. | |
4162 | |
4163 *** `gnus-alter-header-function' can now be used to alter header | |
4164 values. | |
4165 | |
4166 *** `gnus-summary-goto-article' now accept Message-ID's. | |
4167 | |
4168 *** A new Message command for deleting text in the body of a message | |
4169 outside the region: `C-c C-v'. | |
4170 | |
4171 *** You can now post to component group in nnvirtual groups with | |
4172 `C-u C-c C-c'. | |
4173 | |
4174 *** `nntp-rlogin-program' -- new variable to ease customization. | |
4175 | |
4176 *** `C-u C-c C-c' in `gnus-article-edit-mode' will now inhibit | |
4177 re-highlighting of the article buffer. | |
4178 | |
4179 *** New element in `gnus-boring-article-headers' -- `long-to'. | |
4180 | |
4181 *** `M-i' symbolic prefix command. See the section "Symbolic | |
4182 Prefixes" in the Gnus manual for details. | |
4183 | |
4184 *** `L' and `I' in the summary buffer now take the symbolic prefix | |
4185 `a' to add the score rule to the "all.SCORE" file. | |
4186 | |
4187 *** `gnus-simplify-subject-functions' variable to allow greater | |
4188 control over simplification. | |
4189 | |
4190 *** `A T' -- new command for fetching the current thread. | |
4191 | |
4192 *** `/ T' -- new command for including the current thread in the | |
4193 limit. | |
4194 | |
4195 *** `M-RET' is a new Message command for breaking cited text. | |
4196 | |
4197 *** \\1-expressions are now valid in `nnmail-split-methods'. | |
4198 | |
4199 *** The `custom-face-lookup' function has been removed. | |
4200 If you used this function in your initialization files, you must | |
4201 rewrite them to use `face-spec-set' instead. | |
4202 | |
4203 *** Cancelling now uses the current select method. Symbolic prefix | |
4204 `a' forces normal posting method. | |
4205 | |
4206 *** New command to translate M******** sm*rtq**t*s into proper text | |
4207 -- `W d'. | |
4208 | |
4209 *** For easier debugging of nntp, you can set `nntp-record-commands' | |
4210 to a non-nil value. | |
4211 | |
4212 *** nntp now uses ~/.authinfo, a .netrc-like file, for controlling | |
4213 where and how to send AUTHINFO to NNTP servers. | |
4214 | |
4215 *** A command for editing group parameters from the summary buffer | |
4216 has been added. | |
4217 | |
4218 *** A history of where mails have been split is available. | |
4219 | |
4220 *** A new article date command has been added -- `article-date-iso8601'. | |
4221 | |
4222 *** Subjects can be simplified when threading by setting | |
4223 `gnus-score-thread-simplify'. | |
4224 | |
4225 *** A new function for citing in Message has been added -- | |
4226 `message-cite-original-without-signature'. | |
4227 | |
4228 *** `article-strip-all-blank-lines' -- new article command. | |
4229 | |
4230 *** A new Message command to kill to the end of the article has | |
4231 been added. | |
4232 | |
4233 *** A minimum adaptive score can be specified by using the | |
4234 `gnus-adaptive-word-minimum' variable. | |
4235 | |
4236 *** The "lapsed date" article header can be kept continually | |
4237 updated by the `gnus-start-date-timer' command. | |
4238 | |
4239 *** Web listserv archives can be read with the nnlistserv backend. | |
4240 | |
4241 *** Old dejanews archives can now be read by nnweb. | |
4242 | |
4243 *** `gnus-posting-styles' has been re-activated. | |
4244 | |
4245 ** Changes to TeX and LaTeX mode | |
4246 | |
4247 *** The new variable `tex-start-options-string' can be used to give | |
4248 options for the TeX run. The default value causes TeX to run in | |
4249 nonstopmode. For an interactive TeX run set it to nil or "". | |
4250 | |
4251 *** The command `tex-feed-input' sends input to the Tex Shell. In a | |
4252 TeX buffer it is bound to the keys C-RET, C-c RET, and C-c C-m (some | |
4253 of these keys may not work on all systems). For instance, if you run | |
4254 TeX interactively and if the TeX run stops because of an error, you | |
4255 can continue it without leaving the TeX buffer by typing C-RET. | |
4256 | |
4257 *** The Tex Shell Buffer is now in `compilation-shell-minor-mode'. | |
4258 All error-parsing commands of the Compilation major mode are available | |
4259 but bound to keys that don't collide with the shell. Thus you can use | |
4260 the Tex Shell for command line executions like a usual shell. | |
4261 | |
4262 *** The commands `tex-validate-region' and `tex-validate-buffer' check | |
4263 the matching of braces and $'s. The errors are listed in a *Occur* | |
4264 buffer and you can use C-c C-c or mouse-2 to go to a particular | |
4265 mismatch. | |
4266 | |
4267 ** Changes to RefTeX mode | |
4268 | |
4269 *** The table of contents buffer can now also display labels and | |
4270 file boundaries in addition to sections. Use `l', `i', and `c' keys. | |
4271 | |
4272 *** Labels derived from context (the section heading) are now | |
4273 lowercase by default. To make the label legal in LaTeX, latin-1 | |
4274 characters will lose their accent. All Mule characters will be | |
4275 removed from the label. | |
4276 | |
4277 *** The automatic display of cross reference information can also use | |
4278 a window instead of the echo area. See variable `reftex-auto-view-crossref'. | |
4279 | |
4280 *** kpsewhich can be used by RefTeX to find TeX and BibTeX files. See the | |
4281 customization group `reftex-finding-files'. | |
4282 | |
4283 *** The option `reftex-bibfile-ignore-list' has been renamed to | |
4284 `reftex-bibfile-ignore-regexps' and indeed can be fed with regular | |
4285 expressions. | |
4286 | |
4287 *** Multiple Selection buffers are now hidden buffers. | |
4288 | |
4289 ** New/deleted modes and packages | |
4290 | |
4291 *** The package snmp-mode.el provides major modes for editing SNMP and | |
4292 SNMPv2 MIBs. It has entries on `auto-mode-alist'. | |
4293 | |
4294 *** The package sql.el provides a major mode, M-x sql-mode, for | |
4295 editing SQL files, and M-x sql-interactive-mode for interacting with | |
4296 SQL interpreters. It has an entry on `auto-mode-alist'. | |
4297 | |
4298 *** M-x highlight-changes-mode provides a minor mode displaying buffer | |
4299 changes with a special face. | |
4300 | |
4301 *** ispell4.el has been deleted. It got in the way of ispell.el and | |
4302 this was hard to fix reliably. It has long been obsolete -- use | |
4303 Ispell 3.1 and ispell.el. | |
4304 | |
4305 * MS-DOS changes in Emacs 20.4 | |
4306 | |
4307 ** Emacs compiled for MS-DOS now supports MULE features better. | |
4308 This includes support for display of all ISO 8859-N character sets, | |
4309 conversion to and from IBM codepage encoding of non-ASCII characters, | |
4310 and automatic setup of the MULE environment at startup. For details, | |
4311 check out the section `MS-DOS and MULE' in the manual. | |
4312 | |
4313 The MS-DOS installation procedure automatically configures and builds | |
4314 Emacs with input method support if it finds an unpacked Leim | |
4315 distribution when the config.bat script is run. | |
4316 | |
4317 ** Formerly, the value of lpr-command did not affect printing on | |
4318 MS-DOS unless print-region-function was set to nil, but now it | |
4319 controls whether an external program is invoked or output is written | |
4320 directly to a printer port. Similarly, in the previous version of | |
4321 Emacs, the value of ps-lpr-command did not affect PostScript printing | |
4322 on MS-DOS unless ps-printer-name was set to something other than a | |
4323 string (eg. t or `pipe'), but now it controls whether an external | |
4324 program is used. (These changes were made so that configuration of | |
4325 printing variables would be almost identical across all platforms.) | |
4326 | |
4327 ** In the previous version of Emacs, PostScript and non-PostScript | |
4328 output was piped to external programs, but because most print programs | |
4329 available for MS-DOS and MS-Windows cannot read data from their standard | |
4330 input, on those systems the data to be output is now written to a | |
4331 temporary file whose name is passed as the last argument to the external | |
4332 program. | |
4333 | |
4334 An exception is made for `print', a standard program on Windows NT, | |
4335 and `nprint', a standard program on Novell Netware. For both of these | |
4336 programs, the command line is constructed in the appropriate syntax | |
4337 automatically, using only the value of printer-name or ps-printer-name | |
4338 as appropriate--the value of the relevant `-switches' variable is | |
4339 ignored, as both programs have no useful switches. | |
4340 | |
4341 ** The value of the variable dos-printer (cf. dos-ps-printer), if it has | |
4342 a value, overrides the value of printer-name (cf. ps-printer-name), on | |
4343 MS-DOS and MS-Windows only. This has been true since version 20.3, but | |
4344 was not documented clearly before. | |
4345 | |
4346 ** All the Emacs games now work on MS-DOS terminals. | |
4347 This includes Tetris and Snake. | |
4348 | |
4349 * Lisp changes in Emacs 20.4 | |
4350 | |
4351 ** New functions line-beginning-position and line-end-position | |
4352 return the position of the beginning or end of the current line. | |
4353 They both accept an optional argument, which has the same | |
4354 meaning as the argument to beginning-of-line or end-of-line. | |
4355 | |
4356 ** find-file and allied functions now have an optional argument | |
4357 WILDCARD. If this is non-nil, they do wildcard processing, | |
4358 and visit all files that match the wildcard pattern. | |
4359 | |
4360 ** Changes in the file-attributes function. | |
4361 | |
4362 *** The file size returned by file-attributes may be an integer or a float. | |
4363 It is an integer if the size fits in a Lisp integer, float otherwise. | |
4364 | |
4365 *** The inode number returned by file-attributes may be an integer (if | |
4366 the number fits in a Lisp integer) or a cons cell containing two | |
4367 integers. | |
4368 | |
4369 ** The new function directory-files-and-attributes returns a list of | |
4370 files in a directory and their attributes. It accepts the same | |
4371 arguments as directory-files and has similar semantics, except that | |
4372 file names and attributes are returned. | |
4373 | |
4374 ** The new function file-attributes-lessp is a helper function for | |
4375 sorting the list generated by directory-files-and-attributes. It | |
4376 accepts two arguments, each a list of a file name and its atttributes. | |
4377 It compares the file names of each according to string-lessp and | |
4378 returns the result. | |
4379 | |
4380 ** The new function file-expand-wildcards expands a wildcard-pattern | |
4381 to produce a list of existing files that match the pattern. | |
4382 | |
4383 ** New functions for base64 conversion: | |
4384 | |
4385 The function base64-encode-region converts a part of the buffer | |
4386 into the base64 code used in MIME. base64-decode-region | |
4387 performs the opposite conversion. Line-breaking is supported | |
4388 optionally. | |
4389 | |
4390 Functions base64-encode-string and base64-decode-string do a similar | |
4391 job on the text in a string. They return the value as a new string. | |
4392 | |
4393 ** | |
4394 The new function process-running-child-p | |
4395 will tell you if a subprocess has given control of its | |
4396 terminal to its own child process. | |
4397 | |
4398 ** interrupt-process and such functions have a new feature: | |
4399 when the second argument is `lambda', they send a signal | |
4400 to the running child of the subshell, if any, but if the shell | |
4401 itself owns its terminal, no signal is sent. | |
4402 | |
4403 ** There are new widget types `plist' and `alist' which can | |
4404 be used for customizing variables whose values are plists or alists. | |
4405 | |
4406 ** easymenu.el Now understands `:key-sequence' and `:style button'. | |
4407 :included is an alias for :visible. | |
4408 | |
4409 easy-menu-add-item now understands the values returned by | |
4410 easy-menu-remove-item and easy-menu-item-present-p. This can be used | |
4411 to move or copy menu entries. | |
4412 | |
4413 ** Multibyte editing changes | |
4414 | |
4415 *** The definitions of sref and char-bytes are changed. Now, sref is | |
4416 an alias of aref and char-bytes always returns 1. This change is to | |
4417 make some Emacs Lisp code which works on 20.2 and earlier also | |
4418 work on the latest Emacs. Such code uses a combination of sref and | |
4419 char-bytes in a loop typically as below: | |
4420 (setq char (sref str idx) | |
4421 idx (+ idx (char-bytes idx))) | |
4422 The byte-compiler now warns that this is obsolete. | |
4423 | |
4424 If you want to know how many bytes a specific multibyte character | |
4425 (say, CH) occupies in a multibyte buffer, use this code: | |
4426 (charset-bytes (char-charset ch)) | |
4427 | |
4428 *** In multibyte mode, when you narrow a buffer to some region, and the | |
4429 region is preceded or followed by non-ASCII codes, inserting or | |
4430 deleting at the head or the end of the region may signal this error: | |
4431 | |
4432 Byte combining across boundary of accessible buffer text inhibitted | |
4433 | |
4434 This is to avoid some bytes being combined together into a character | |
4435 across the boundary. | |
4436 | |
4437 *** The functions find-charset-region and find-charset-string include | |
4438 `unknown' in the returned list in the following cases: | |
4439 o The current buffer or the target string is unibyte and | |
4440 contains 8-bit characters. | |
4441 o The current buffer or the target string is multibyte and | |
4442 contains invalid characters. | |
4443 | |
4444 *** The functions decode-coding-region and encode-coding-region remove | |
4445 text properties of the target region. Ideally, they should correctly | |
4446 preserve text properties, but for the moment, it's hard. Removing | |
4447 text properties is better than preserving them in a less-than-correct | |
4448 way. | |
4449 | |
4450 *** prefer-coding-system sets EOL conversion of default coding systems. | |
4451 If the argument to prefer-coding-system specifies a certain type of | |
4452 end of line conversion, the default coding systems set by | |
4453 prefer-coding-system will specify that conversion type for end of line. | |
4454 | |
4455 *** The new function thai-compose-string can be used to properly | |
4456 compose Thai characters in a string. | |
4457 | |
4458 ** The primitive `define-prefix-command' now takes an optional third | |
4459 argument NAME, which should be a string. It supplies the menu name | |
4460 for the created keymap. Keymaps created in order to be displayed as | |
4461 menus should always use the third argument. | |
4462 | |
4463 ** The meanings of optional second arguments for read-char, | |
4464 read-event, and read-char-exclusive are flipped. Now the second | |
4465 arguments are INHERIT-INPUT-METHOD. These functions use the current | |
4466 input method (if any) if and only if INHERIT-INPUT-METHOD is non-nil. | |
4467 | |
4468 ** The new function clear-this-command-keys empties out the contents | |
4469 of the vector that (this-command-keys) returns. This is useful in | |
4470 programs that read passwords, to prevent the passwords from echoing | |
4471 inadvertently as part of the next command in certain cases. | |
4472 | |
4473 ** The new macro `with-temp-message' displays a temporary message in | |
4474 the echo area, while executing some Lisp code. Like `progn', it | |
4475 returns the value of the last form, but it also restores the previous | |
4476 echo area contents. | |
4477 | |
4478 (with-temp-message MESSAGE &rest BODY) | |
4479 | |
4480 ** The function `require' now takes an optional third argument | |
4481 NOERROR. If it is non-nil, then there is no error if the | |
4482 requested feature cannot be loaded. | |
4483 | |
4484 ** In the function modify-face, an argument of (nil) for the | |
4485 foreground color, background color or stipple pattern | |
4486 means to clear out that attribute. | |
4487 | |
4488 ** The `outer-window-id' frame property of an X frame | |
4489 gives the window number of the outermost X window for the frame. | |
4490 | |
4491 ** Temporary buffers made with with-output-to-temp-buffer are now | |
4492 read-only by default, and normally use the major mode Help mode | |
4493 unless you put them in some other non-Fundamental mode before the | |
4494 end of with-output-to-temp-buffer. | |
4495 | |
4496 ** The new functions gap-position and gap-size return information on | |
4497 the gap of the current buffer. | |
4498 | |
4499 ** The new functions position-bytes and byte-to-position provide a way | |
4500 to convert between character positions and byte positions in the | |
4501 current buffer. | |
4502 | |
4503 ** vc.el defines two new macros, `edit-vc-file' and `with-vc-file', to | |
4504 facilitate working with version-controlled files from Lisp programs. | |
4505 These macros check out a given file automatically if needed, and check | |
4506 it back in after any modifications have been made. | |
4507 | |
4508 * Installation Changes in Emacs 20.3 | |
4509 | |
4510 ** The default value of load-path now includes most subdirectories of | |
4511 the site-specific directories /usr/local/share/emacs/site-lisp and | |
4512 /usr/local/share/emacs/VERSION/site-lisp, in addition to those | |
4513 directories themselves. Both immediate subdirectories and | |
4514 subdirectories multiple levels down are added to load-path. | |
4515 | |
4516 Not all subdirectories are included, though. Subdirectories whose | |
4517 names do not start with a letter or digit are excluded. | |
4518 Subdirectories named RCS or CVS are excluded. Also, a subdirectory | |
4519 which contains a file named `.nosearch' is excluded. You can use | |
4520 these methods to prevent certain subdirectories from being searched. | |
4521 | |
4522 Emacs finds these subdirectories and adds them to load-path when it | |
4523 starts up. While it would be cleaner to find the subdirectories each | |
4524 time Emacs loads a file, that would be much slower. | |
4525 | |
4526 This feature is an incompatible change. If you have stored some Emacs | |
4527 Lisp files in a subdirectory of the site-lisp directory specifically | |
4528 to prevent them from being used, you will need to rename the | |
4529 subdirectory to start with a non-alphanumeric character, or create a | |
4530 `.nosearch' file in it, in order to continue to achieve the desired | |
4531 results. | |
4532 | |
4533 ** Emacs no longer includes an old version of the C preprocessor from | |
4534 GCC. This was formerly used to help compile Emacs with C compilers | |
4535 that had limits on the significant length of an identifier, but in | |
4536 fact we stopped supporting such compilers some time ago. | |
4537 | |
4538 * Changes in Emacs 20.3 | |
4539 | |
4540 ** The new command C-x z (repeat) repeats the previous command | |
4541 including its argument. If you repeat the z afterward, | |
4542 it repeats the command additional times; thus, you can | |
4543 perform many repetitions with one keystroke per repetition. | |
4544 | |
4545 ** Emacs now supports "selective undo" which undoes only within a | |
4546 specified region. To do this, set point and mark around the desired | |
4547 region and type C-u C-x u (or C-u C-_). You can then continue undoing | |
4548 further, within the same region, by repeating the ordinary undo | |
4549 command C-x u or C-_. This will keep undoing changes that were made | |
4550 within the region you originally specified, until either all of them | |
4551 are undone, or it encounters a change which crosses the edge of that | |
4552 region. | |
4553 | |
4554 In Transient Mark mode, undoing when a region is active requests | |
4555 selective undo. | |
4556 | |
4557 ** If you specify --unibyte when starting Emacs, then all buffers are | |
4558 unibyte, except when a Lisp program specifically creates a multibyte | |
4559 buffer. Setting the environment variable EMACS_UNIBYTE has the same | |
4560 effect. The --no-unibyte option overrides EMACS_UNIBYTE and directs | |
4561 Emacs to run normally in multibyte mode. | |
4562 | |
4563 The option --unibyte does not affect the reading of Emacs Lisp files, | |
4564 though. If you want a Lisp file to be read in unibyte mode, use | |
4565 -*-unibyte: t;-*- on its first line. That will force Emacs to | |
4566 load that file in unibyte mode, regardless of how Emacs was started. | |
4567 | |
4568 ** toggle-enable-multibyte-characters no longer has a key binding and | |
4569 no longer appears in the menu bar. We've realized that changing the | |
4570 enable-multibyte-characters variable in an existing buffer is | |
4571 something that most users not do. | |
4572 | |
4573 ** You can specify a coding system to use for the next cut or paste | |
4574 operations through the window system with the command C-x RET X. | |
4575 The coding system can make a difference for communication with other | |
4576 applications. | |
4577 | |
4578 C-x RET x specifies a coding system for all subsequent cutting and | |
4579 pasting operations. | |
4580 | |
4581 ** You can specify the printer to use for commands that do printing by | |
4582 setting the variable `printer-name'. Just what a printer name looks | |
4583 like depends on your operating system. You can specify a different | |
4584 printer for the Postscript printing commands by setting | |
4585 `ps-printer-name'. | |
4586 | |
4587 ** Emacs now supports on-the-fly spell checking by the means of a | |
4588 minor mode. It is called M-x flyspell-mode. You don't have to remember | |
4589 any other special commands to use it, and you will hardly notice it | |
4590 except when you make a spelling error. Flyspell works by highlighting | |
4591 incorrect words as soon as they are completed or as soon as the cursor | |
4592 hits a new word. | |
4593 | |
4594 Flyspell mode works with whichever dictionary you have selected for | |
4595 Ispell in Emacs. In TeX mode, it understands TeX syntax so as not | |
4596 to be confused by TeX commands. | |
4597 | |
4598 You can correct a misspelled word by editing it into something | |
4599 correct. You can also correct it, or accept it as correct, by | |
4600 clicking on the word with Mouse-2; that gives you a pop-up menu | |
4601 of various alternative replacements and actions. | |
4602 | |
4603 Flyspell mode also proposes "automatic" corrections. M-TAB replaces | |
4604 the current misspelled word with a possible correction. If several | |
4605 corrections are made possible, M-TAB cycles through them in | |
4606 alphabetical order, or in order of decreasing likelihood if | |
4607 flyspell-sort-corrections is nil. | |
4608 | |
4609 Flyspell mode also flags an error when a word is repeated, if | |
4610 flyspell-mark-duplications-flag is non-nil. | |
4611 | |
4612 ** Changes in input method usage. | |
4613 | |
4614 Now you can use arrow keys (right, left, down, up) for selecting among | |
4615 the alternatives just the same way as you do by C-f, C-b, C-n, and C-p | |
4616 respectively. | |
4617 | |
4618 You can use the ENTER key to accept the current conversion. | |
4619 | |
4620 If you type TAB to display a list of alternatives, you can select one | |
4621 of the alternatives with Mouse-2. | |
4622 | |
4623 The meaning of the variable `input-method-verbose-flag' is changed so | |
4624 that you can set it to t, nil, `default', or `complex-only'. | |
4625 | |
4626 If the value is nil, extra guidance is never given. | |
4627 | |
4628 If the value is t, extra guidance is always given. | |
4629 | |
4630 If the value is `complex-only', extra guidance is always given only | |
4631 when you are using complex input methods such as chinese-py. | |
4632 | |
4633 If the value is `default' (this is the default), extra guidance is | |
4634 given in the following case: | |
4635 o When you are using a complex input method. | |
4636 o When you are using a simple input method but not in the minibuffer. | |
4637 | |
4638 If you are using Emacs through a very slow line, setting | |
4639 input-method-verbose-flag to nil or to complex-only is a good choice, | |
4640 and if you are using an input method you are not familiar with, | |
4641 setting it to t is helpful. | |
4642 | |
4643 The old command select-input-method is now called set-input-method. | |
4644 | |
4645 In the language environment "Korean", you can use the following | |
4646 keys: | |
4647 Shift-SPC toggle-korean-input-method | |
4648 C-F9 quail-hangul-switch-symbol-ksc | |
4649 F9 quail-hangul-switch-hanja | |
4650 These key bindings are canceled when you switch to another language | |
4651 environment. | |
4652 | |
4653 ** The minibuffer history of file names now records the specified file | |
4654 names, not the entire minibuffer input. For example, if the | |
4655 minibuffer starts out with /usr/foo/, you might type in /etc/passwd to | |
4656 get | |
4657 | |
4658 /usr/foo//etc/passwd | |
4659 | |
4660 which stands for the file /etc/passwd. | |
4661 | |
4662 Formerly, this used to put /usr/foo//etc/passwd in the history list. | |
4663 Now this puts just /etc/passwd in the history list. | |
4664 | |
4665 ** If you are root, Emacs sets backup-by-copying-when-mismatch to t | |
4666 at startup, so that saving a file will be sure to preserve | |
4667 its owner and group. | |
4668 | |
4669 ** find-func.el can now also find the place of definition of Emacs | |
4670 Lisp variables in user-loaded libraries. | |
4671 | |
4672 ** C-x r t (string-rectangle) now deletes the existing rectangle | |
4673 contents before inserting the specified string on each line. | |
4674 | |
4675 ** There is a new command delete-whitespace-rectangle | |
4676 which deletes whitespace starting from a particular column | |
4677 in all the lines on a rectangle. The column is specified | |
4678 by the left edge of the rectangle. | |
4679 | |
4680 ** You can now store a number into a register with C-u NUMBER C-x r n REG, | |
4681 increment it by INC with C-u INC C-x r + REG (to increment by one, omit | |
4682 C-u INC), and insert it in the buffer with C-x r g REG. This is useful | |
4683 for writing keyboard macros. | |
4684 | |
4685 ** The new command M-x speedbar displays a frame in which directories, | |
4686 files, and tags can be displayed, manipulated, and jumped to. The | |
4687 frame defaults to 20 characters in width, and is the same height as | |
4688 the frame that it was started from. Some major modes define | |
4689 additional commands for the speedbar, including Rmail, GUD/GDB, and | |
4690 info. | |
4691 | |
4692 ** query-replace-regexp is now bound to C-M-%. | |
4693 | |
4694 ** In Transient Mark mode, when the region is active, M-x | |
4695 query-replace and the other replace commands now operate on the region | |
4696 contents only. | |
4697 | |
4698 ** M-x write-region, when used interactively, now asks for | |
4699 confirmation before overwriting an existing file. When you call | |
4700 the function from a Lisp program, a new optional argument CONFIRM | |
4701 says whether to ask for confirmation in this case. | |
4702 | |
4703 ** If you use find-file-literally and the file is already visited | |
4704 non-literally, the command asks you whether to revisit the file | |
4705 literally. If you say no, it signals an error. | |
4706 | |
4707 ** Major modes defined with the "derived mode" feature | |
4708 now use the proper name for the mode hook: WHATEVER-mode-hook. | |
4709 Formerly they used the name WHATEVER-mode-hooks, but that is | |
4710 inconsistent with Emacs conventions. | |
4711 | |
4712 ** shell-command-on-region (and shell-command) reports success or | |
4713 failure if the command produces no output. | |
4714 | |
4715 ** Set focus-follows-mouse to nil if your window system or window | |
4716 manager does not transfer focus to another window when you just move | |
4717 the mouse. | |
4718 | |
4719 ** mouse-menu-buffer-maxlen has been renamed to | |
4720 mouse-buffer-menu-maxlen to be consistent with the other related | |
4721 function and variable names. | |
4722 | |
4723 ** The new variable auto-coding-alist specifies coding systems for | |
4724 reading specific files. This has higher priority than | |
4725 file-coding-system-alist. | |
4726 | |
4727 ** If you set the variable unibyte-display-via-language-environment to | |
4728 t, then Emacs displays non-ASCII characters are displayed by | |
4729 converting them to the equivalent multibyte characters according to | |
4730 the current language environment. As a result, they are displayed | |
4731 according to the current fontset. | |
4732 | |
4733 ** C-q's handling of codes in the range 0200 through 0377 is changed. | |
4734 | |
4735 The codes in the range 0200 through 0237 are inserted as one byte of | |
4736 that code regardless of the values of nonascii-translation-table and | |
4737 nonascii-insert-offset. | |
4738 | |
4739 For the codes in the range 0240 through 0377, if | |
4740 enable-multibyte-characters is non-nil and nonascii-translation-table | |
4741 nor nonascii-insert-offset can't convert them to valid multibyte | |
4742 characters, they are converted to Latin-1 characters. | |
4743 | |
4744 ** If you try to find a file that is not read-accessible, you now get | |
4745 an error, rather than an empty buffer and a warning. | |
4746 | |
4747 ** In the minibuffer history commands M-r and M-s, an upper case | |
4748 letter in the regular expression forces case-sensitive search. | |
4749 | |
4750 ** In the *Help* buffer, cross-references to commands and variables | |
4751 are inferred and hyperlinked. Use C-h m in Help mode for the relevant | |
4752 command keys. | |
4753 | |
4754 ** M-x apropos-command, with a prefix argument, no longer looks for | |
4755 user option variables--instead it looks for noninteractive functions. | |
4756 | |
4757 Meanwhile, the command apropos-variable normally searches for | |
4758 user option variables; with a prefix argument, it looks at | |
4759 all variables that have documentation. | |
4760 | |
4761 ** When you type a long line in the minibuffer, and the minibuffer | |
4762 shows just one line, automatically scrolling works in a special way | |
4763 that shows you overlap with the previous line of text. The variable | |
4764 minibuffer-scroll-overlap controls how many characters of overlap | |
4765 it should show; the default is 20. | |
4766 | |
4767 Meanwhile, Resize Minibuffer mode is still available; in that mode, | |
4768 the minibuffer grows taller (up to a point) as needed to show the whole | |
4769 of your input. | |
4770 | |
4771 ** The new command M-x customize-changed-options lets you customize | |
4772 all the options whose meanings or default values have changed in | |
4773 recent Emacs versions. You specify a previous Emacs version number as | |
4774 argument, and the command creates a customization buffer showing all | |
4775 the customizable options which were changed since that version. | |
4776 Newly added options are included as well. | |
4777 | |
4778 If you don't specify a particular version number argument, | |
4779 then the customization buffer shows all the customizable options | |
4780 for which Emacs versions of changes are recorded. | |
4781 | |
4782 This function is also bound to the Changed Options entry in the | |
4783 Customize menu. | |
4784 | |
4785 ** When you run M-x grep with a prefix argument, it figures out | |
4786 the tag around point and puts that into the default grep command. | |
4787 | |
4788 ** The new command M-* (pop-tag-mark) pops back through a history of | |
4789 buffer positions from which M-. or other tag-finding commands were | |
4790 invoked. | |
4791 | |
4792 ** The new variable comment-padding specifies the number of spaces | |
4793 that `comment-region' will insert before the actual text of the comment. | |
4794 The default is 1. | |
4795 | |
4796 ** In Fortran mode the characters `.', `_' and `$' now have symbol | |
4797 syntax, not word syntax. Fortran mode now supports `imenu' and has | |
4798 new commands fortran-join-line (M-^) and fortran-narrow-to-subprogram | |
4799 (C-x n d). M-q can be used to fill a statement or comment block | |
4800 sensibly. | |
4801 | |
4802 ** GUD now supports jdb, the Java debugger, and pdb, the Python debugger. | |
4803 | |
4804 ** If you set the variable add-log-keep-changes-together to a non-nil | |
4805 value, the command `C-x 4 a' will automatically notice when you make | |
4806 two entries in one day for one file, and combine them. | |
4807 | |
4808 ** You can use the command M-x diary-mail-entries to mail yourself a | |
4809 reminder about upcoming diary entries. See the documentation string | |
4810 for a sample shell script for calling this function automatically | |
4811 every night. | |
4812 | |
4813 ** Desktop changes | |
4814 | |
4815 *** All you need to do to enable use of the Desktop package, is to set | |
4816 the variable desktop-enable to t with Custom. | |
4817 | |
4818 *** Minor modes are now restored. Which minor modes are restored | |
4819 and how modes are restored is controlled by `desktop-minor-mode-table'. | |
4820 | |
4821 ** There is no need to do anything special, now, to enable Gnus to | |
4822 read and post multi-lingual articles. | |
4823 | |
4824 ** Outline mode has now support for showing hidden outlines when | |
4825 doing an isearch. In order for this to happen search-invisible should | |
4826 be set to open (the default). If an isearch match is inside a hidden | |
4827 outline the outline is made visible. If you continue pressing C-s and | |
4828 the match moves outside the formerly invisible outline, the outline is | |
4829 made invisible again. | |
4830 | |
4831 ** Mail reading and sending changes | |
4832 | |
4833 *** The Rmail e command now switches to displaying the whole header of | |
4834 the message before it lets you edit the message. This is so that any | |
4835 changes you make in the header will not be lost if you subsequently | |
4836 toggle. | |
4837 | |
4838 *** The w command in Rmail, which writes the message body into a file, | |
4839 now works in the summary buffer as well. (The command to delete the | |
4840 summary buffer is now Q.) The default file name for the w command, if | |
4841 the message has no subject, is stored in the variable | |
4842 rmail-default-body-file. | |
4843 | |
4844 *** Most of the commands and modes that operate on mail and netnews no | |
4845 longer depend on the value of mail-header-separator. Instead, they | |
4846 handle whatever separator the buffer happens to use. | |
4847 | |
4848 *** If you set mail-signature to a value which is not t, nil, or a string, | |
4849 it should be an expression. When you send a message, this expression | |
4850 is evaluated to insert the signature. | |
4851 | |
4852 *** The new Lisp library feedmail.el (version 8) enhances processing of | |
4853 outbound email messages. It works in coordination with other email | |
4854 handling packages (e.g., rmail, VM, gnus) and is responsible for | |
4855 putting final touches on messages and actually submitting them for | |
4856 transmission. Users of the emacs program "fakemail" might be | |
4857 especially interested in trying feedmail. | |
4858 | |
4859 feedmail is not enabled by default. See comments at the top of | |
4860 feedmail.el for set-up instructions. Among the bigger features | |
4861 provided by feedmail are: | |
4862 | |
4863 **** you can park outgoing messages into a disk-based queue and | |
4864 stimulate sending some or all of them later (handy for laptop users); | |
4865 there is also a queue for draft messages | |
4866 | |
4867 **** you can get one last look at the prepped outbound message and | |
4868 be prompted for confirmation | |
4869 | |
4870 **** does smart filling of address headers | |
4871 | |
4872 **** can generate a MESSAGE-ID: line and a DATE: line; the date can be | |
4873 the time the message was written or the time it is being sent; this | |
4874 can make FCC copies more closely resemble copies that recipients get | |
4875 | |
4876 **** you can specify an arbitrary function for actually transmitting | |
4877 the message; included in feedmail are interfaces for /bin/[r]mail, | |
4878 /usr/lib/sendmail, and elisp smtpmail; it's easy to write a new | |
4879 function for something else (10-20 lines of elisp) | |
4880 | |
4881 ** Dired changes | |
4882 | |
4883 *** The Dired function dired-do-toggle, which toggles marked and unmarked | |
4884 files, is now bound to "t" instead of "T". | |
4885 | |
4886 *** dired-at-point has been added to ffap.el. It allows one to easily | |
4887 run Dired on the directory name at point. | |
4888 | |
4889 *** Dired has a new command: %g. It searches the contents of | |
4890 files in the directory and marks each file that contains a match | |
4891 for a specified regexp. | |
4892 | |
4893 ** VC Changes | |
4894 | |
4895 *** New option vc-ignore-vc-files lets you turn off version control | |
4896 conveniently. | |
4897 | |
4898 *** VC Dired has been completely rewritten. It is now much | |
4899 faster, especially for CVS, and works very similar to ordinary | |
4900 Dired. | |
4901 | |
4902 VC Dired is invoked by typing C-x v d and entering the name of the | |
4903 directory to display. By default, VC Dired gives you a recursive | |
4904 listing of all files at or below the given directory which are | |
4905 currently locked (for CVS, all files not up-to-date are shown). | |
4906 | |
4907 You can change the listing format by setting vc-dired-recurse to nil, | |
4908 then it shows only the given directory, and you may also set | |
4909 vc-dired-terse-display to nil, then it shows all files under version | |
4910 control plus the names of any subdirectories, so that you can type `i' | |
4911 on such lines to insert them manually, as in ordinary Dired. | |
4912 | |
4913 All Dired commands operate normally in VC Dired, except for `v', which | |
4914 is redefined as the version control prefix. That means you may type | |
4915 `v l', `v =' etc. to invoke `vc-print-log', `vc-diff' and the like on | |
4916 the file named in the current Dired buffer line. `v v' invokes | |
4917 `vc-next-action' on this file, or on all files currently marked. | |
4918 | |
4919 The new command `v t' (vc-dired-toggle-terse-mode) allows you to | |
4920 toggle between terse display (only locked files) and full display (all | |
4921 VC files plus subdirectories). There is also a special command, | |
4922 `* l', to mark all files currently locked. | |
4923 | |
4924 Giving a prefix argument to C-x v d now does the same thing as in | |
4925 ordinary Dired: it allows you to supply additional options for the ls | |
4926 command in the minibuffer, to fine-tune VC Dired's output. | |
4927 | |
4928 *** Under CVS, if you merge changes from the repository into a working | |
4929 file, and CVS detects conflicts, VC now offers to start an ediff | |
4930 session to resolve them. | |
4931 | |
4932 Alternatively, you can use the new command `vc-resolve-conflicts' to | |
4933 resolve conflicts in a file at any time. It works in any buffer that | |
4934 contains conflict markers as generated by rcsmerge (which is what CVS | |
4935 uses as well). | |
4936 | |
4937 *** You can now transfer changes between branches, using the new | |
4938 command vc-merge (C-x v m). It is implemented for RCS and CVS. When | |
4939 you invoke it in a buffer under version-control, you can specify | |
4940 either an entire branch or a pair of versions, and the changes on that | |
4941 branch or between the two versions are merged into the working file. | |
4942 If this results in any conflicts, they may be resolved interactively, | |
4943 using ediff. | |
4944 | |
4945 ** Changes in Font Lock | |
4946 | |
4947 *** The face and variable previously known as font-lock-reference-face | |
4948 are now called font-lock-constant-face to better reflect their typical | |
4949 use for highlighting constants and labels. (Its face properties are | |
4950 unchanged.) The variable font-lock-reference-face remains for now for | |
4951 compatibility reasons, but its value is font-lock-constant-face. | |
4952 | |
4953 ** Frame name display changes | |
4954 | |
4955 *** The command set-frame-name lets you set the name of the current | |
4956 frame. You can use the new command select-frame-by-name to select and | |
4957 raise a frame; this is mostly useful on character-only terminals, or | |
4958 when many frames are invisible or iconified. | |
4959 | |
4960 *** On character-only terminal (not a window system), changing the | |
4961 frame name is now reflected on the mode line and in the Buffers/Frames | |
4962 menu. | |
4963 | |
4964 ** Comint (subshell) changes | |
4965 | |
4966 *** In Comint modes, the commands to kill, stop or interrupt a | |
4967 subjob now also kill pending input. This is for compatibility | |
4968 with ordinary shells, where the signal characters do this. | |
4969 | |
4970 *** There are new commands in Comint mode. | |
4971 | |
4972 C-c C-x fetches the "next" line from the input history; | |
4973 that is, the line after the last line you got. | |
4974 You can use this command to fetch successive lines, one by one. | |
4975 | |
4976 C-c SPC accumulates lines of input. More precisely, it arranges to | |
4977 send the current line together with the following line, when you send | |
4978 the following line. | |
4979 | |
4980 C-c C-a if repeated twice consecutively now moves to the process mark, | |
4981 which separates the pending input from the subprocess output and the | |
4982 previously sent input. | |
4983 | |
4984 C-c M-r now runs comint-previous-matching-input-from-input; | |
4985 it searches for a previous command, using the current pending input | |
4986 as the search string. | |
4987 | |
4988 *** New option compilation-scroll-output can be set to scroll | |
4989 automatically in compilation-mode windows. | |
4990 | |
4991 ** C mode changes | |
4992 | |
4993 *** Multiline macros are now handled, both as they affect indentation, | |
4994 and as recognized syntax. New syntactic symbol cpp-macro-cont is | |
4995 assigned to second and subsequent lines of a multiline macro | |
4996 definition. | |
4997 | |
4998 *** A new style "user" which captures all non-hook-ified | |
4999 (i.e. top-level) .emacs file variable settings and customizations. | |
5000 Style "cc-mode" is an alias for "user" and is deprecated. "gnu" | |
5001 style is still the default however. | |
5002 | |
5003 *** "java" style now conforms to Sun's JDK coding style. | |
5004 | |
5005 *** There are new commands c-beginning-of-defun, c-end-of-defun which | |
5006 are alternatives which you could bind to C-M-a and C-M-e if you prefer | |
5007 them. They do not have key bindings by default. | |
5008 | |
5009 *** New and improved implementations of M-a (c-beginning-of-statement) | |
5010 and M-e (c-end-of-statement). | |
5011 | |
5012 *** C++ namespace blocks are supported, with new syntactic symbols | |
5013 namespace-open, namespace-close, and innamespace. | |
5014 | |
5015 *** File local variable settings of c-file-style and c-file-offsets | |
5016 makes the style variables local to that buffer only. | |
5017 | |
5018 *** New indentation functions c-lineup-close-paren, | |
5019 c-indent-one-line-block, c-lineup-dont-change. | |
5020 | |
5021 *** Improvements (hopefully!) to the way CC Mode is loaded. You | |
5022 should now be able to do a (require 'cc-mode) to get the entire | |
5023 package loaded properly for customization in your .emacs file. A new | |
5024 variable c-initialize-on-load controls this and is t by default. | |
5025 | |
5026 ** Changes to hippie-expand. | |
5027 | |
5028 *** New customization variable `hippie-expand-dabbrev-skip-space'. If | |
5029 non-nil, trailing spaces may be included in the abbreviation to search for, | |
5030 which then gives the same behavior as the original `dabbrev-expand'. | |
5031 | |
5032 *** New customization variable `hippie-expand-dabbrev-as-symbol'. If | |
5033 non-nil, characters of syntax '_' is considered part of the word when | |
5034 expanding dynamically. | |
5035 | |
5036 *** New customization variable `hippie-expand-no-restriction'. If | |
5037 non-nil, narrowed buffers are widened before they are searched. | |
5038 | |
5039 *** New customization variable `hippie-expand-only-buffers'. If | |
5040 non-empty, buffers searched are restricted to the types specified in | |
5041 this list. Useful for example when constructing new special-purpose | |
5042 expansion functions with `make-hippie-expand-function'. | |
5043 | |
5044 *** Text properties of the expansion are no longer copied. | |
5045 | |
5046 ** Changes in BibTeX mode. | |
5047 | |
5048 *** Any titleword matching a regexp in the new variable | |
5049 bibtex-autokey-titleword-ignore (case sensitive) is ignored during | |
5050 automatic key generation. This replaces variable | |
5051 bibtex-autokey-titleword-first-ignore, which only checked for matches | |
5052 against the first word in the title. | |
5053 | |
5054 *** Autokey generation now uses all words from the title, not just | |
5055 capitalized words. To avoid conflicts with existing customizations, | |
5056 bibtex-autokey-titleword-ignore is set up such that words starting with | |
5057 lowerkey characters will still be ignored. Thus, if you want to use | |
5058 lowercase words from the title, you will have to overwrite the | |
5059 bibtex-autokey-titleword-ignore standard setting. | |
5060 | |
5061 *** Case conversion of names and title words for automatic key | |
5062 generation is more flexible. Variable bibtex-autokey-preserve-case is | |
5063 replaced by bibtex-autokey-titleword-case-convert and | |
5064 bibtex-autokey-name-case-convert. | |
5065 | |
5066 ** Changes in vcursor.el. | |
5067 | |
5068 *** Support for character terminals is available: there is a new keymap | |
5069 and the vcursor will appear as an arrow between buffer text. A | |
5070 variable `vcursor-interpret-input' allows input from the vcursor to be | |
5071 entered exactly as if typed. Numerous functions, including | |
5072 `vcursor-compare-windows', have been rewritten to improve consistency | |
5073 in the selection of windows and corresponding keymaps. | |
5074 | |
5075 *** vcursor options can now be altered with M-x customize under the | |
5076 Editing group once the package is loaded. | |
5077 | |
5078 *** Loading vcursor now does not define keys by default, as this is | |
5079 generally a bad side effect. Use M-x customize to set | |
5080 vcursor-key-bindings to t to restore the old behaviour. | |
5081 | |
5082 *** vcursor-auto-disable can be `copy', which turns off copying from the | |
5083 vcursor, but doesn't disable it, after any non-vcursor command. | |
5084 | |
5085 ** Ispell changes. | |
5086 | |
5087 *** You can now spell check comments and strings in the current | |
5088 buffer with M-x ispell-comments-and-strings. Comments and strings | |
5089 are identified by syntax tables in effect. | |
5090 | |
5091 *** Generic region skipping implemented. | |
5092 A single buffer can be broken into a number of regions where text will | |
5093 and will not be checked. The definitions of the regions can be user | |
5094 defined. New applications and improvements made available by this | |
5095 include: | |
5096 | |
5097 o URLs are automatically skipped | |
5098 o EMail message checking is vastly improved. | |
5099 | |
5100 *** Ispell can highlight the erroneous word even on non-window terminals. | |
5101 | |
5102 ** Changes to RefTeX mode | |
5103 | |
5104 RefTeX has been updated in order to make it more usable with very | |
5105 large projects (like a several volume math book). The parser has been | |
5106 re-written from scratch. To get maximum speed from RefTeX, check the | |
5107 section `Optimizations' in the manual. | |
5108 | |
5109 *** New recursive parser. | |
5110 | |
5111 The old version of RefTeX created a single large buffer containing the | |
5112 entire multifile document in order to parse the document. The new | |
5113 recursive parser scans the individual files. | |
5114 | |
5115 *** Parsing only part of a document. | |
5116 | |
5117 Reparsing of changed document parts can now be made faster by enabling | |
5118 partial scans. To use this feature, read the documentation string of | |
5119 the variable `reftex-enable-partial-scans' and set the variable to t. | |
5120 | |
5121 (setq reftex-enable-partial-scans t) | |
5122 | |
5123 *** Storing parsing information in a file. | |
5124 | |
5125 This can improve startup times considerably. To turn it on, use | |
5126 | |
5127 (setq reftex-save-parse-info t) | |
5128 | |
5129 *** Using multiple selection buffers | |
5130 | |
5131 If the creation of label selection buffers is too slow (this happens | |
5132 for large documents), you can reuse these buffers by setting | |
5133 | |
5134 (setq reftex-use-multiple-selection-buffers t) | |
5135 | |
5136 *** References to external documents. | |
5137 | |
5138 The LaTeX package `xr' allows to cross-reference labels in external | |
5139 documents. RefTeX can provide information about the external | |
5140 documents as well. To use this feature, set up the \externaldocument | |
5141 macros required by the `xr' package and rescan the document with | |
5142 RefTeX. The external labels can then be accessed with the `x' key in | |
5143 the selection buffer provided by `reftex-reference' (bound to `C-c )'). | |
5144 The `x' key also works in the table of contents buffer. | |
5145 | |
5146 *** Many more labeled LaTeX environments are recognized by default. | |
5147 | |
5148 The builtin command list now covers all the standard LaTeX commands, | |
5149 and all of the major packages included in the LaTeX distribution. | |
5150 | |
5151 Also, RefTeX now understands the \appendix macro and changes | |
5152 the enumeration of sections in the *toc* buffer accordingly. | |
5153 | |
5154 *** Mouse support for selection and *toc* buffers | |
5155 | |
5156 The mouse can now be used to select items in the selection and *toc* | |
5157 buffers. See also the new option `reftex-highlight-selection'. | |
5158 | |
5159 *** New keymaps for selection and table of contents modes. | |
5160 | |
5161 The selection processes for labels and citation keys, and the table of | |
5162 contents buffer now have their own keymaps: `reftex-select-label-map', | |
5163 `reftex-select-bib-map', `reftex-toc-map'. The selection processes | |
5164 have a number of new keys predefined. In particular, TAB lets you | |
5165 enter a label with completion. Check the on-the-fly help (press `?' | |
5166 at the selection prompt) or read the Info documentation to find out | |
5167 more. | |
5168 | |
5169 *** Support for the varioref package | |
5170 | |
5171 The `v' key in the label selection buffer toggles \ref versus \vref. | |
5172 | |
5173 *** New hooks | |
5174 | |
5175 Three new hooks can be used to redefine the way labels, references, | |
5176 and citations are created. These hooks are | |
5177 `reftex-format-label-function', `reftex-format-ref-function', | |
5178 `reftex-format-cite-function'. | |
5179 | |
5180 *** Citations outside LaTeX | |
5181 | |
5182 The command `reftex-citation' may also be used outside LaTeX (e.g. in | |
5183 a mail buffer). See the Info documentation for details. | |
5184 | |
5185 *** Short context is no longer fontified. | |
5186 | |
5187 The short context in the label menu no longer copies the | |
5188 fontification from the text in the buffer. If you prefer it to be | |
5189 fontified, use | |
5190 | |
5191 (setq reftex-refontify-context t) | |
5192 | |
5193 ** file-cache-minibuffer-complete now accepts a prefix argument. | |
5194 With a prefix argument, it does not try to do completion of | |
5195 the file name within its directory; it only checks for other | |
5196 directories that contain the same file name. | |
5197 | |
5198 Thus, given the file name Makefile, and assuming that a file | |
5199 Makefile.in exists in the same directory, ordinary | |
5200 file-cache-minibuffer-complete will try to complete Makefile to | |
5201 Makefile.in and will therefore never look for other directories that | |
5202 have Makefile. A prefix argument tells it not to look for longer | |
5203 names such as Makefile.in, so that instead it will look for other | |
5204 directories--just as if the name were already complete in its present | |
5205 directory. | |
5206 | |
5207 ** New modes and packages | |
5208 | |
5209 *** There is a new alternative major mode for Perl, Cperl mode. | |
5210 It has many more features than Perl mode, and some people prefer | |
5211 it, but some do not. | |
5212 | |
5213 *** There is a new major mode, M-x vhdl-mode, for editing files of VHDL | |
5214 code. | |
5215 | |
5216 *** M-x which-function-mode enables a minor mode that displays the | |
5217 current function name continuously in the mode line, as you move | |
5218 around in a buffer. | |
5219 | |
5220 Which Function mode is effective in major modes which support Imenu. | |
5221 | |
5222 *** Gametree is a major mode for editing game analysis trees. The author | |
5223 uses it for keeping notes about his postal Chess games, but it should | |
5224 be helpful for other two-player games as well, as long as they have an | |
5225 established system of notation similar to Chess. | |
5226 | |
5227 *** The new minor mode checkdoc-minor-mode provides Emacs Lisp | |
5228 documentation string checking for style and spelling. The style | |
5229 guidelines are found in the Emacs Lisp programming manual. | |
5230 | |
5231 *** The net-utils package makes some common networking features | |
5232 available in Emacs. Some of these functions are wrappers around | |
5233 system utilities (ping, nslookup, etc); others are implementations of | |
5234 simple protocols (finger, whois) in Emacs Lisp. There are also | |
5235 functions to make simple connections to TCP/IP ports for debugging and | |
5236 the like. | |
5237 | |
5238 *** highlight-changes-mode is a minor mode that uses colors to | |
5239 identify recently changed parts of the buffer text. | |
5240 | |
5241 *** The new package `midnight' lets you specify things to be done | |
5242 within Emacs at midnight--by default, kill buffers that you have not | |
5243 used in a considerable time. To use this feature, customize | |
5244 the user option `midnight-mode' to t. | |
5245 | |
5246 *** The file generic-x.el defines a number of simple major modes. | |
5247 | |
5248 apache-generic-mode: For Apache and NCSA httpd configuration files | |
5249 samba-generic-mode: Samba configuration files | |
5250 fvwm-generic-mode: For fvwm initialization files | |
5251 x-resource-generic-mode: For X resource files | |
5252 hosts-generic-mode: For hosts files (.rhosts, /etc/hosts, etc) | |
5253 mailagent-rules-generic-mode: For mailagent .rules files | |
5254 javascript-generic-mode: For JavaScript files | |
5255 vrml-generic-mode: For VRML files | |
5256 java-manifest-generic-mode: For Java MANIFEST files | |
5257 java-properties-generic-mode: For Java property files | |
5258 mailrc-generic-mode: For .mailrc files | |
5259 | |
5260 Platform-specific modes: | |
5261 | |
5262 prototype-generic-mode: For Solaris/Sys V prototype files | |
5263 pkginfo-generic-mode: For Solaris/Sys V pkginfo files | |
5264 alias-generic-mode: For C shell alias files | |
5265 inf-generic-mode: For MS-Windows INF files | |
5266 ini-generic-mode: For MS-Windows INI files | |
5267 reg-generic-mode: For MS-Windows Registry files | |
5268 bat-generic-mode: For MS-Windows BAT scripts | |
5269 rc-generic-mode: For MS-Windows Resource files | |
5270 rul-generic-mode: For InstallShield scripts | |
5271 | |
5272 * Lisp changes in Emacs 20.3 since the Emacs Lisp Manual was published | |
5273 | |
5274 ** If you want a Lisp file to be read in unibyte mode, | |
5275 use -*-unibyte: t;-*- on its first line. | |
5276 That will force Emacs to read that file in unibyte mode. | |
5277 Otherwise, the file will be loaded and byte-compiled in multibyte mode. | |
5278 | |
5279 Thus, each lisp file is read in a consistent way regardless of whether | |
5280 you started Emacs with --unibyte, so that a Lisp program gives | |
5281 consistent results regardless of how Emacs was started. | |
5282 | |
5283 ** The new function assoc-default is useful for searching an alist, | |
5284 and using a default value if the key is not found there. You can | |
5285 specify a comparison predicate, so this function is useful for | |
5286 searching comparing a string against an alist of regular expressions. | |
5287 | |
5288 ** The functions unibyte-char-to-multibyte and | |
5289 multibyte-char-to-unibyte convert between unibyte and multibyte | |
5290 character codes, in a way that is appropriate for the current language | |
5291 environment. | |
5292 | |
5293 ** The functions read-event, read-char and read-char-exclusive now | |
5294 take two optional arguments. PROMPT, if non-nil, specifies a prompt | |
5295 string. SUPPRESS-INPUT-METHOD, if non-nil, says to disable the | |
5296 current input method for reading this one event. | |
5297 | |
5298 ** Two new variables print-escape-nonascii and print-escape-multibyte | |
5299 now control whether to output certain characters as | |
5300 backslash-sequences. print-escape-nonascii applies to single-byte | |
5301 non-ASCII characters; print-escape-multibyte applies to multibyte | |
5302 characters. Both of these variables are used only when printing | |
5303 in readable fashion (prin1 uses them, princ does not). | |
5304 | |
5305 * Lisp changes in Emacs 20.3 before the Emacs Lisp Manual was published | |
5306 | |
5307 ** Compiled Emacs Lisp files made with the modified "MBSK" version | |
5308 of Emacs 20.2 do not work in Emacs 20.3. | |
5309 | |
5310 ** Buffer positions are now measured in characters, as they were | |
5311 in Emacs 19 and before. This means that (forward-char 1) | |
5312 always increases point by 1. | |
5313 | |
5314 The function chars-in-region now just subtracts its arguments. It is | |
5315 considered obsolete. The function char-boundary-p has been deleted. | |
5316 | |
5317 See below for additional changes relating to multibyte characters. | |
5318 | |
5319 ** defcustom, defface and defgroup now accept the keyword `:version'. | |
5320 Use this to specify in which version of Emacs a certain variable's | |
5321 default value changed. For example, | |
5322 | |
5323 (defcustom foo-max 34 "*Maximum number of foo's allowed." | |
5324 :type 'integer | |
5325 :group 'foo | |
5326 :version "20.3") | |
5327 | |
5328 (defgroup foo-group nil "The foo group." | |
5329 :version "20.3") | |
5330 | |
5331 If an entire new group is added or the variables in it have the | |
5332 default values changed, then just add a `:version' to that group. It | |
5333 is recommended that new packages added to the distribution contain a | |
5334 `:version' in the top level group. | |
5335 | |
5336 This information is used to control the customize-changed-options command. | |
5337 | |
5338 ** It is now an error to change the value of a symbol whose name | |
5339 starts with a colon--if it is interned in the standard obarray. | |
5340 | |
5341 However, setting such a symbol to its proper value, which is that | |
5342 symbol itself, is not an error. This is for the sake of programs that | |
5343 support previous Emacs versions by explicitly setting these variables | |
5344 to themselves. | |
5345 | |
5346 If you set the variable keyword-symbols-constant-flag to nil, | |
5347 this error is suppressed, and you can set these symbols to any | |
5348 values whatever. | |
5349 | |
5350 ** There is a new debugger command, R. | |
5351 It evaluates an expression like e, but saves the result | |
5352 in the buffer *Debugger-record*. | |
5353 | |
5354 ** Frame-local variables. | |
5355 | |
5356 You can now make a variable local to various frames. To do this, call | |
5357 the function make-variable-frame-local; this enables frames to have | |
5358 local bindings for that variable. | |
5359 | |
5360 These frame-local bindings are actually frame parameters: you create a | |
5361 frame-local binding in a specific frame by calling | |
5362 modify-frame-parameters and specifying the variable name as the | |
5363 parameter name. | |
5364 | |
5365 Buffer-local bindings take precedence over frame-local bindings. | |
5366 Thus, if the current buffer has a buffer-local binding, that binding is | |
5367 active; otherwise, if the selected frame has a frame-local binding, | |
5368 that binding is active; otherwise, the default binding is active. | |
5369 | |
5370 It would not be hard to implement window-local bindings, but it is not | |
5371 clear that this would be very useful; windows tend to come and go in a | |
5372 very transitory fashion, so that trying to produce any specific effect | |
5373 through a window-local binding would not be very robust. | |
5374 | |
5375 ** `sregexq' and `sregex' are two new functions for constructing | |
5376 "symbolic regular expressions." These are Lisp expressions that, when | |
5377 evaluated, yield conventional string-based regexps. The symbolic form | |
5378 makes it easier to construct, read, and maintain complex patterns. | |
5379 See the documentation in sregex.el. | |
5380 | |
5381 ** parse-partial-sexp's return value has an additional element which | |
5382 is used to pass information along if you pass it to another call to | |
5383 parse-partial-sexp, starting its scan where the first call ended. | |
5384 The contents of this field are not yet finalized. | |
5385 | |
5386 ** eval-region now accepts a fourth optional argument READ-FUNCTION. | |
5387 If it is non-nil, that function is used instead of `read'. | |
5388 | |
5389 ** unload-feature by default removes the feature's functions from | |
5390 known hooks to avoid trouble, but a package providing FEATURE can | |
5391 define a hook FEATURE-unload-hook to be run by unload-feature instead. | |
5392 | |
5393 ** read-from-minibuffer no longer returns the argument DEFAULT-VALUE | |
5394 when the user enters empty input. It now returns the null string, as | |
5395 it did in Emacs 19. The default value is made available in the | |
5396 history via M-n, but it is not applied here as a default. | |
5397 | |
5398 The other, more specialized minibuffer-reading functions continue to | |
5399 return the default value (not the null string) when the user enters | |
5400 empty input. | |
5401 | |
5402 ** The new variable read-buffer-function controls which routine to use | |
5403 for selecting buffers. For example, if you set this variable to | |
5404 `iswitchb-read-buffer', iswitchb will be used to read buffer names. | |
5405 Other functions can also be used if they accept the same arguments as | |
5406 `read-buffer' and return the selected buffer name as a string. | |
5407 | |
5408 ** The new function read-passwd reads a password from the terminal, | |
5409 echoing a period for each character typed. It takes three arguments: | |
5410 a prompt string, a flag which says "read it twice to make sure", and a | |
5411 default password to use if the user enters nothing. | |
5412 | |
5413 ** The variable fill-nobreak-predicate gives major modes a way to | |
5414 specify not to break a line at certain places. Its value is a | |
5415 function which is called with no arguments, with point located at the | |
5416 place where a break is being considered. If the function returns | |
5417 non-nil, then the line won't be broken there. | |
5418 | |
5419 ** window-end now takes an optional second argument, UPDATE. | |
5420 If this is non-nil, then the function always returns an accurate | |
5421 up-to-date value for the buffer position corresponding to the | |
5422 end of the window, even if this requires computation. | |
5423 | |
5424 ** other-buffer now takes an optional argument FRAME | |
5425 which specifies which frame's buffer list to use. | |
5426 If it is nil, that means use the selected frame's buffer list. | |
5427 | |
5428 ** The new variable buffer-display-time, always local in every buffer, | |
5429 holds the value of (current-time) as of the last time that a window | |
5430 was directed to display this buffer. | |
5431 | |
5432 ** It is now meaningful to compare two window-configuration objects | |
5433 with `equal'. Two window-configuration objects are equal if they | |
5434 describe equivalent arrangements of windows, in the same frame--in | |
5435 other words, if they would give the same results if passed to | |
5436 set-window-configuration. | |
5437 | |
5438 ** compare-window-configurations is a new function that compares two | |
5439 window configurations loosely. It ignores differences in saved buffer | |
5440 positions and scrolling, and considers only the structure and sizes of | |
5441 windows and the choice of buffers to display. | |
5442 | |
5443 ** The variable minor-mode-overriding-map-alist allows major modes to | |
5444 override the key bindings of a minor mode. The elements of this alist | |
5445 look like the elements of minor-mode-map-alist: (VARIABLE . KEYMAP). | |
5446 | |
5447 If the VARIABLE in an element of minor-mode-overriding-map-alist has a | |
5448 non-nil value, the paired KEYMAP is active, and totally overrides the | |
5449 map (if any) specified for the same variable in minor-mode-map-alist. | |
5450 | |
5451 minor-mode-overriding-map-alist is automatically local in all buffers, | |
5452 and it is meant to be set by major modes. | |
5453 | |
5454 ** The function match-string-no-properties is like match-string | |
5455 except that it discards all text properties from the result. | |
5456 | |
5457 ** The function load-average now accepts an optional argument | |
5458 USE-FLOATS. If it is non-nil, the load average values are returned as | |
5459 floating point numbers, rather than as integers to be divided by 100. | |
5460 | |
5461 ** The new variable temporary-file-directory specifies the directory | |
5462 to use for creating temporary files. The default value is determined | |
5463 in a reasonable way for your operating system; on GNU and Unix systems | |
5464 it is based on the TMP and TMPDIR environment variables. | |
5465 | |
5466 ** Menu changes | |
5467 | |
5468 *** easymenu.el now uses the new menu item format and supports the | |
5469 keywords :visible and :filter. The existing keyword :keys is now | |
5470 better supported. | |
5471 | |
5472 The variable `easy-menu-precalculate-equivalent-keybindings' controls | |
5473 a new feature which calculates keyboard equivalents for the menu when | |
5474 you define the menu. The default is t. If you rarely use menus, you | |
5475 can set the variable to nil to disable this precalculation feature; | |
5476 then the calculation is done only if you use the menu bar. | |
5477 | |
5478 *** A new format for menu items is supported. | |
5479 | |
5480 In a keymap, a key binding that has the format | |
5481 (STRING . REAL-BINDING) or (STRING HELP-STRING . REAL-BINDING) | |
5482 defines a menu item. Now a menu item definition may also be a list that | |
5483 starts with the symbol `menu-item'. | |
5484 | |
5485 The format is: | |
5486 (menu-item ITEM-NAME) or | |
5487 (menu-item ITEM-NAME REAL-BINDING . ITEM-PROPERTY-LIST) | |
5488 where ITEM-NAME is an expression which evaluates to the menu item | |
5489 string, and ITEM-PROPERTY-LIST has the form of a property list. | |
5490 The supported properties include | |
5491 | |
5492 :enable FORM Evaluate FORM to determine whether the | |
5493 item is enabled. | |
5494 :visible FORM Evaluate FORM to determine whether the | |
5495 item should appear in the menu. | |
5496 :filter FILTER-FN | |
5497 FILTER-FN is a function of one argument, | |
5498 which will be REAL-BINDING. | |
5499 It should return a binding to use instead. | |
5500 :keys DESCRIPTION | |
5501 DESCRIPTION is a string that describes an equivalent keyboard | |
5502 binding for for REAL-BINDING. DESCRIPTION is expanded with | |
5503 `substitute-command-keys' before it is used. | |
5504 :key-sequence KEY-SEQUENCE | |
5505 KEY-SEQUENCE is a key-sequence for an equivalent | |
5506 keyboard binding. | |
5507 :key-sequence nil | |
5508 This means that the command normally has no | |
5509 keyboard equivalent. | |
5510 :help HELP HELP is the extra help string (not currently used). | |
5511 :button (TYPE . SELECTED) | |
5512 TYPE is :toggle or :radio. | |
5513 SELECTED is a form, to be evaluated, and its | |
5514 value says whether this button is currently selected. | |
5515 | |
5516 Buttons are at the moment only simulated by prefixes in the menu. | |
5517 Eventually ordinary X-buttons may be supported. | |
5518 | |
5519 (menu-item ITEM-NAME) defines unselectable item. | |
5520 | |
5521 ** New event types | |
5522 | |
5523 *** The new event type `mouse-wheel' is generated by a wheel on a | |
5524 mouse (such as the MS Intellimouse). The event contains a delta that | |
5525 corresponds to the amount and direction that the wheel is rotated, | |
5526 which is typically used to implement a scroll or zoom. The format is: | |
5527 | |
5528 (mouse-wheel POSITION DELTA) | |
5529 | |
5530 where POSITION is a list describing the position of the event in the | |
5531 same format as a mouse-click event, and DELTA is a signed number | |
5532 indicating the number of increments by which the wheel was rotated. A | |
5533 negative DELTA indicates that the wheel was rotated backwards, towards | |
5534 the user, and a positive DELTA indicates that the wheel was rotated | |
5535 forward, away from the user. | |
5536 | |
5537 As of now, this event type is generated only on MS Windows. | |
5538 | |
5539 *** The new event type `drag-n-drop' is generated when a group of | |
5540 files is selected in an application outside of Emacs, and then dragged | |
5541 and dropped onto an Emacs frame. The event contains a list of | |
5542 filenames that were dragged and dropped, which are then typically | |
5543 loaded into Emacs. The format is: | |
5544 | |
5545 (drag-n-drop POSITION FILES) | |
5546 | |
5547 where POSITION is a list describing the position of the event in the | |
5548 same format as a mouse-click event, and FILES is the list of filenames | |
5549 that were dragged and dropped. | |
5550 | |
5551 As of now, this event type is generated only on MS Windows. | |
5552 | |
5553 ** Changes relating to multibyte characters. | |
5554 | |
5555 *** The variable enable-multibyte-characters is now read-only; | |
5556 any attempt to set it directly signals an error. The only way | |
5557 to change this value in an existing buffer is with set-buffer-multibyte. | |
5558 | |
5559 *** In a string constant, `\ ' now stands for "nothing at all". You | |
5560 can use it to terminate a hex escape which is followed by a character | |
5561 that could otherwise be read as part of the hex escape. | |
5562 | |
5563 *** String indices are now measured in characters, as they were | |
5564 in Emacs 19 and before. | |
5565 | |
5566 The function chars-in-string has been deleted. | |
5567 The function concat-chars has been renamed to `string'. | |
5568 | |
5569 *** The function set-buffer-multibyte sets the flag in the current | |
5570 buffer that says whether the buffer uses multibyte representation or | |
5571 unibyte representation. If the argument is nil, it selects unibyte | |
5572 representation. Otherwise it selects multibyte representation. | |
5573 | |
5574 This function does not change the contents of the buffer, viewed | |
5575 as a sequence of bytes. However, it does change the contents | |
5576 viewed as characters; a sequence of two bytes which is treated as | |
5577 one character when the buffer uses multibyte representation | |
5578 will count as two characters using unibyte representation. | |
5579 | |
5580 This function sets enable-multibyte-characters to record which | |
5581 representation is in use. It also adjusts various data in the buffer | |
5582 (including its markers, overlays and text properties) so that they are | |
5583 consistent with the new representation. | |
5584 | |
5585 *** string-make-multibyte takes a string and converts it to multibyte | |
5586 representation. Most of the time, you don't need to care | |
5587 about the representation, because Emacs converts when necessary; | |
5588 however, it makes a difference when you compare strings. | |
5589 | |
5590 The conversion of non-ASCII characters works by adding the value of | |
5591 nonascii-insert-offset to each character, or by translating them | |
5592 using the table nonascii-translation-table. | |
5593 | |
5594 *** string-make-unibyte takes a string and converts it to unibyte | |
5595 representation. Most of the time, you don't need to care about the | |
5596 representation, but it makes a difference when you compare strings. | |
5597 | |
5598 The conversion from multibyte to unibyte representation | |
5599 loses information; the only time Emacs performs it automatically | |
5600 is when inserting a multibyte string into a unibyte buffer. | |
5601 | |
5602 *** string-as-multibyte takes a string, and returns another string | |
5603 which contains the same bytes, but treats them as multibyte. | |
5604 | |
5605 *** string-as-unibyte takes a string, and returns another string | |
5606 which contains the same bytes, but treats them as unibyte. | |
5607 | |
5608 *** The new function compare-strings lets you compare | |
5609 portions of two strings. Unibyte strings are converted to multibyte, | |
5610 so that a unibyte string can match a multibyte string. | |
5611 You can specify whether to ignore case or not. | |
5612 | |
5613 *** assoc-ignore-case now uses compare-strings so that | |
5614 it can treat unibyte and multibyte strings as equal. | |
5615 | |
5616 *** Regular expression operations and buffer string searches now | |
5617 convert the search pattern to multibyte or unibyte to accord with the | |
5618 buffer or string being searched. | |
5619 | |
5620 One consequence is that you cannot always use \200-\377 inside of | |
5621 [...] to match all non-ASCII characters. This does still work when | |
5622 searching or matching a unibyte buffer or string, but not when | |
5623 searching or matching a multibyte string. Unfortunately, there is no | |
5624 obvious choice of syntax to use within [...] for that job. But, what | |
5625 you want is just to match all non-ASCII characters, the regular | |
5626 expression [^\0-\177] works for it. | |
5627 | |
5628 *** Structure of coding system changed. | |
5629 | |
5630 All coding systems (including aliases and subsidiaries) are named | |
5631 by symbols; the symbol's `coding-system' property is a vector | |
5632 which defines the coding system. Aliases share the same vector | |
5633 as the principal name, so that altering the contents of this | |
5634 vector affects the principal name and its aliases. You can define | |
5635 your own alias name of a coding system by the function | |
5636 define-coding-system-alias. | |
5637 | |
5638 The coding system definition includes a property list of its own. Use | |
5639 the new functions `coding-system-get' and `coding-system-put' to | |
5640 access such coding system properties as post-read-conversion, | |
5641 pre-write-conversion, character-translation-table-for-decode, | |
5642 character-translation-table-for-encode, mime-charset, and | |
5643 safe-charsets. For instance, (coding-system-get 'iso-latin-1 | |
5644 'mime-charset) gives the corresponding MIME-charset parameter | |
5645 `iso-8859-1'. | |
5646 | |
5647 Among the coding system properties listed above, safe-charsets is new. | |
5648 The value of this property is a list of character sets which this | |
5649 coding system can correctly encode and decode. For instance: | |
5650 (coding-system-get 'iso-latin-1 'safe-charsets) => (ascii latin-iso8859-1) | |
5651 | |
5652 Here, "correctly encode" means that the encoded character sets can | |
5653 also be handled safely by systems other than Emacs as far as they | |
5654 are capable of that coding system. Though, Emacs itself can encode | |
5655 the other character sets and read it back correctly. | |
5656 | |
5657 *** The new function select-safe-coding-system can be used to find a | |
5658 proper coding system for encoding the specified region or string. | |
5659 This function requires a user interaction. | |
5660 | |
5661 *** The new functions find-coding-systems-region and | |
5662 find-coding-systems-string are helper functions used by | |
5663 select-safe-coding-system. They return a list of all proper coding | |
5664 systems to encode a text in some region or string. If you don't want | |
5665 a user interaction, use one of these functions instead of | |
5666 select-safe-coding-system. | |
5667 | |
5668 *** The explicit encoding and decoding functions, such as | |
5669 decode-coding-region and encode-coding-string, now set | |
5670 last-coding-system-used to reflect the actual way encoding or decoding | |
5671 was done. | |
5672 | |
5673 *** The new function detect-coding-with-language-environment can be | |
5674 used to detect a coding system of text according to priorities of | |
5675 coding systems used by some specific language environment. | |
5676 | |
5677 *** The functions detect-coding-region and detect-coding-string always | |
5678 return a list if the arg HIGHEST is nil. Thus, if only ASCII | |
5679 characters are found, they now return a list of single element | |
5680 `undecided' or its subsidiaries. | |
5681 | |
5682 *** The new functions coding-system-change-eol-conversion and | |
5683 coding-system-change-text-conversion can be used to get a different | |
5684 coding system than what specified only in how end-of-line or text is | |
5685 converted. | |
5686 | |
5687 *** The new function set-selection-coding-system can be used to set a | |
5688 coding system for communicating with other X clients. | |
5689 | |
5690 *** The function `map-char-table' now passes as argument only valid | |
5691 character codes, plus generic characters that stand for entire | |
5692 character sets or entire subrows of a character set. In other words, | |
5693 each time `map-char-table' calls its FUNCTION argument, the key value | |
5694 either will be a valid individual character code, or will stand for a | |
5695 range of characters. | |
5696 | |
5697 *** The new function `char-valid-p' can be used for checking whether a | |
5698 Lisp object is a valid character code or not. | |
5699 | |
5700 *** The new function `charset-after' returns a charset of a character | |
5701 in the current buffer at position POS. | |
5702 | |
5703 *** Input methods are now implemented using the variable | |
5704 input-method-function. If this is non-nil, its value should be a | |
5705 function; then, whenever Emacs reads an input event that is a printing | |
5706 character with no modifier bits, it calls that function, passing the | |
5707 event as an argument. Often this function will read more input, first | |
5708 binding input-method-function to nil. | |
5709 | |
5710 The return value should be a list of the events resulting from input | |
5711 method processing. These events will be processed sequentially as | |
5712 input, before resorting to unread-command-events. Events returned by | |
5713 the input method function are not passed to the input method function, | |
5714 not even if they are printing characters with no modifier bits. | |
5715 | |
5716 The input method function is not called when reading the second and | |
5717 subsequent events of a key sequence. | |
5718 | |
5719 *** You can customize any language environment by using | |
5720 set-language-environment-hook and exit-language-environment-hook. | |
5721 | |
5722 The hook `exit-language-environment-hook' should be used to undo | |
5723 customizations that you made with set-language-environment-hook. For | |
5724 instance, if you set up a special key binding for a specific language | |
5725 environment by set-language-environment-hook, you should set up | |
5726 exit-language-environment-hook to restore the normal key binding. | |
5727 | |
5728 * Changes in Emacs 20.1 | |
5729 | |
5730 ** Emacs has a new facility for customization of its many user | |
5731 options. It is called M-x customize. With this facility you can look | |
5732 at the many user options in an organized way; they are grouped into a | |
5733 tree structure. | |
5734 | |
5735 M-x customize also knows what sorts of values are legitimate for each | |
5736 user option and ensures that you don't use invalid values. | |
5737 | |
5738 With M-x customize, you can set options either for the present Emacs | |
5739 session or permanently. (Permanent settings are stored automatically | |
5740 in your .emacs file.) | |
5741 | |
5742 ** Scroll bars are now on the left side of the window. | |
5743 You can change this with M-x customize-option scroll-bar-mode. | |
5744 | |
5745 ** The mode line no longer includes the string `Emacs'. | |
5746 This makes more space in the mode line for other information. | |
5747 | |
5748 ** When you select a region with the mouse, it is highlighted | |
5749 immediately afterward. At that time, if you type the DELETE key, it | |
5750 kills the region. | |
5751 | |
5752 The BACKSPACE key, and the ASCII character DEL, do not do this; they | |
5753 delete the character before point, as usual. | |
5754 | |
5755 ** In an incremental search the whole current match is highlighted | |
5756 on terminals which support this. (You can disable this feature | |
5757 by setting search-highlight to nil.) | |
5758 | |
5759 ** In the minibuffer, in some cases, you can now use M-n to | |
5760 insert the default value into the minibuffer as text. In effect, | |
5761 the default value (if the minibuffer routines know it) is tacked | |
5762 onto the history "in the future". (The more normal use of the | |
5763 history list is to use M-p to insert minibuffer input used in the | |
5764 past.) | |
5765 | |
5766 ** In Text mode, now only blank lines separate paragraphs. | |
5767 This makes it possible to get the full benefit of Adaptive Fill mode | |
5768 in Text mode, and other modes derived from it (such as Mail mode). | |
5769 TAB in Text mode now runs the command indent-relative; this | |
5770 makes a practical difference only when you use indented paragraphs. | |
5771 | |
5772 As a result, the old Indented Text mode is now identical to Text mode, | |
5773 and is an alias for it. | |
5774 | |
5775 If you want spaces at the beginning of a line to start a paragraph, | |
5776 use the new mode, Paragraph Indent Text mode. | |
5777 | |
5778 ** Scrolling changes | |
5779 | |
5780 *** Scroll commands to scroll a whole screen now preserve the screen | |
5781 position of the cursor, if scroll-preserve-screen-position is non-nil. | |
5782 | |
5783 In this mode, if you scroll several screens back and forth, finishing | |
5784 on the same screen where you started, the cursor goes back to the line | |
5785 where it started. | |
5786 | |
5787 *** If you set scroll-conservatively to a small number, then when you | |
5788 move point a short distance off the screen, Emacs will scroll the | |
5789 screen just far enough to bring point back on screen, provided that | |
5790 does not exceed `scroll-conservatively' lines. | |
5791 | |
5792 *** The new variable scroll-margin says how close point can come to the | |
5793 top or bottom of a window. It is a number of screen lines; if point | |
5794 comes within that many lines of the top or bottom of the window, Emacs | |
5795 recenters the window. | |
5796 | |
5797 ** International character set support (MULE) | |
5798 | |
5799 Emacs now supports a wide variety of international character sets, | |
5800 including European variants of the Latin alphabet, as well as Chinese, | |
5801 Devanagari (Hindi and Marathi), Ethiopian, Greek, IPA, Japanese, | |
5802 Korean, Lao, Russian, Thai, Tibetan, and Vietnamese scripts. These | |
5803 features have been merged from the modified version of Emacs known as | |
5804 MULE (for "MULti-lingual Enhancement to GNU Emacs") | |
5805 | |
5806 Users of these scripts have established many more-or-less standard | |
5807 coding systems for storing files. Emacs uses a single multibyte | |
5808 character encoding within Emacs buffers; it can translate from a wide | |
5809 variety of coding systems when reading a file and can translate back | |
5810 into any of these coding systems when saving a file. | |
5811 | |
5812 Keyboards, even in the countries where these character sets are used, | |
5813 generally don't have keys for all the characters in them. So Emacs | |
5814 supports various "input methods", typically one for each script or | |
5815 language, to make it possible to type them. | |
5816 | |
5817 The Emacs internal multibyte encoding represents a non-ASCII | |
5818 character as a sequence of bytes in the range 0200 through 0377. | |
5819 | |
5820 The new prefix key C-x RET is used for commands that pertain | |
5821 to multibyte characters, coding systems, and input methods. | |
5822 | |
5823 You can disable multibyte character support as follows: | |
5824 | |
5825 (setq-default enable-multibyte-characters nil) | |
5826 | |
5827 Calling the function standard-display-european turns off multibyte | |
5828 characters, unless you specify a non-nil value for the second | |
5829 argument, AUTO. This provides compatibility for people who are | |
5830 already using standard-display-european to continue using unibyte | |
5831 characters for their work until they want to change. | |
5832 | |
5833 *** Input methods | |
5834 | |
5835 An input method is a kind of character conversion which is designed | |
5836 specifically for interactive input. In Emacs, typically each language | |
5837 has its own input method (though sometimes several languages which use | |
5838 the same characters can share one input method). Some languages | |
5839 support several input methods. | |
5840 | |
5841 The simplest kind of input method works by mapping ASCII letters into | |
5842 another alphabet. This is how the Greek and Russian input methods | |
5843 work. | |
5844 | |
5845 A more powerful technique is composition: converting sequences of | |
5846 characters into one letter. Many European input methods use | |
5847 composition to produce a single non-ASCII letter from a sequence which | |
5848 consists of a letter followed by diacritics. For example, a' is one | |
5849 sequence of two characters that might be converted into a single | |
5850 letter. | |
5851 | |
5852 The input methods for syllabic scripts typically use mapping followed | |
5853 by conversion. The input methods for Thai and Korean work this way. | |
5854 First, letters are mapped into symbols for particular sounds or tone | |
5855 marks; then, sequences of these which make up a whole syllable are | |
5856 mapped into one syllable sign--most often a "composite character". | |
5857 | |
5858 None of these methods works very well for Chinese and Japanese, so | |
5859 they are handled specially. First you input a whole word using | |
5860 phonetic spelling; then, after the word is in the buffer, Emacs | |
5861 converts it into one or more characters using a large dictionary. | |
5862 | |
5863 Since there is more than one way to represent a phonetically spelled | |
5864 word using Chinese characters, Emacs can only guess which one to use; | |
5865 typically these input methods give you a way to say "guess again" if | |
5866 the first guess is wrong. | |
5867 | |
5868 *** The command C-x RET m (toggle-enable-multibyte-characters) | |
5869 turns multibyte character support on or off for the current buffer. | |
5870 | |
5871 If multibyte character support is turned off in a buffer, then each | |
5872 byte is a single character, even codes 0200 through 0377--exactly as | |
5873 they did in Emacs 19.34. This includes the features for support for | |
5874 the European characters, ISO Latin-1 and ISO Latin-2. | |
5875 | |
5876 However, there is no need to turn off multibyte character support to | |
5877 use ISO Latin-1 or ISO Latin-2; the Emacs multibyte character set | |
5878 includes all the characters in these character sets, and Emacs can | |
5879 translate automatically to and from either one. | |
5880 | |
5881 *** Visiting a file in unibyte mode. | |
5882 | |
5883 Turning off multibyte character support in the buffer after visiting a | |
5884 file with multibyte code conversion will display the multibyte | |
5885 sequences already in the buffer, byte by byte. This is probably not | |
5886 what you want. | |
5887 | |
5888 If you want to edit a file of unibyte characters (Latin-1, for | |
5889 example), you can do it by specifying `no-conversion' as the coding | |
5890 system when reading the file. This coding system also turns off | |
5891 multibyte characters in that buffer. | |
5892 | |
5893 If you turn off multibyte character support entirely, this turns off | |
5894 character conversion as well. | |
5895 | |
5896 *** Displaying international characters on X Windows. | |
5897 | |
5898 A font for X typically displays just one alphabet or script. | |
5899 Therefore, displaying the entire range of characters Emacs supports | |
5900 requires using many fonts. | |
5901 | |
5902 Therefore, Emacs now supports "fontsets". Each fontset is a | |
5903 collection of fonts, each assigned to a range of character codes. | |
5904 | |
5905 A fontset has a name, like a font. Individual fonts are defined by | |
5906 the X server; fontsets are defined within Emacs itself. But once you | |
5907 have defined a fontset, you can use it in a face or a frame just as | |
5908 you would use a font. | |
5909 | |
5910 If a fontset specifies no font for a certain character, or if it | |
5911 specifies a font that does not exist on your system, then it cannot | |
5912 display that character. It will display an empty box instead. | |
5913 | |
5914 The fontset height and width are determined by the ASCII characters | |
5915 (that is, by the font in the fontset which is used for ASCII | |
5916 characters). If another font in the fontset has a different height, | |
5917 or the wrong width, then characters assigned to that font are clipped, | |
5918 and displayed within a box if highlight-wrong-size-font is non-nil. | |
5919 | |
5920 *** Defining fontsets. | |
5921 | |
5922 Emacs does not use any fontset by default. Its default font is still | |
5923 chosen as in previous versions. You can tell Emacs to use a fontset | |
5924 with the `-fn' option or the `Font' X resource. | |
5925 | |
5926 Emacs creates a standard fontset automatically according to the value | |
5927 of standard-fontset-spec. This fontset's short name is | |
5928 `fontset-standard'. Bold, italic, and bold-italic variants of the | |
5929 standard fontset are created automatically. | |
5930 | |
5931 If you specify a default ASCII font with the `Font' resource or `-fn' | |
5932 argument, a fontset is generated from it. This works by replacing the | |
5933 FOUNDARY, FAMILY, ADD_STYLE, and AVERAGE_WIDTH fields of the font name | |
5934 with `*' then using this to specify a fontset. This fontset's short | |
5935 name is `fontset-startup'. | |
5936 | |
5937 Emacs checks resources of the form Fontset-N where N is 0, 1, 2... | |
5938 The resource value should have this form: | |
5939 FONTSET-NAME, [CHARSET-NAME:FONT-NAME]... | |
5940 FONTSET-NAME should have the form of a standard X font name, except: | |
5941 * most fields should be just the wild card "*". | |
5942 * the CHARSET_REGISTRY field should be "fontset" | |
5943 * the CHARSET_ENCODING field can be any nickname of the fontset. | |
5944 The construct CHARSET-NAME:FONT-NAME can be repeated any number | |
5945 of times; each time specifies the font for one character set. | |
5946 CHARSET-NAME should be the name name of a character set, and | |
5947 FONT-NAME should specify an actual font to use for that character set. | |
5948 | |
5949 Each of these fontsets has an alias which is made from the | |
5950 last two font name fields, CHARSET_REGISTRY and CHARSET_ENCODING. | |
5951 You can refer to the fontset by that alias or by its full name. | |
5952 | |
5953 For any character sets that you don't mention, Emacs tries to choose a | |
5954 font by substituting into FONTSET-NAME. For instance, with the | |
5955 following resource, | |
5956 Emacs*Fontset-0: -*-fixed-medium-r-normal-*-24-*-*-*-*-*-fontset-24 | |
5957 the font for ASCII is generated as below: | |
5958 -*-fixed-medium-r-normal-*-24-*-ISO8859-1 | |
5959 Here is the substitution rule: | |
5960 Change CHARSET_REGISTRY and CHARSET_ENCODING to that of the charset | |
5961 defined in the variable x-charset-registries. For instance, ASCII has | |
5962 the entry (ascii . "ISO8859-1") in this variable. Then, reduce | |
5963 sequences of wild cards -*-...-*- with a single wildcard -*-. | |
5964 (This is to prevent use of auto-scaled fonts.) | |
5965 | |
5966 The function which processes the fontset resource value to create the | |
5967 fontset is called create-fontset-from-fontset-spec. You can also call | |
5968 that function explicitly to create a fontset. | |
5969 | |
5970 With the X resource Emacs.Font, you can specify a fontset name just | |
5971 like an actual font name. But be careful not to specify a fontset | |
5972 name in a wildcard resource like Emacs*Font--that tries to specify the | |
5973 fontset for other purposes including menus, and they cannot handle | |
5974 fontsets. | |
5975 | |
5976 *** The command M-x set-language-environment sets certain global Emacs | |
5977 defaults for a particular choice of language. | |
5978 | |
5979 Selecting a language environment typically specifies a default input | |
5980 method and which coding systems to recognize automatically when | |
5981 visiting files. However, it does not try to reread files you have | |
5982 already visited; the text in those buffers is not affected. The | |
5983 language environment may also specify a default choice of coding | |
5984 system for new files that you create. | |
5985 | |
5986 It makes no difference which buffer is current when you use | |
5987 set-language-environment, because these defaults apply globally to the | |
5988 whole Emacs session. | |
5989 | |
5990 For example, M-x set-language-environment RET Latin-1 RET | |
5991 chooses the Latin-1 character set. In the .emacs file, you can do this | |
5992 with (set-language-environment "Latin-1"). | |
5993 | |
5994 *** The command C-x RET f (set-buffer-file-coding-system) | |
5995 specifies the file coding system for the current buffer. This | |
5996 specifies what sort of character code translation to do when saving | |
5997 the file. As an argument, you must specify the name of one of the | |
5998 coding systems that Emacs supports. | |
5999 | |
6000 *** The command C-x RET c (universal-coding-system-argument) | |
6001 lets you specify a coding system when you read or write a file. | |
6002 This command uses the minibuffer to read a coding system name. | |
6003 After you exit the minibuffer, the specified coding system | |
6004 is used for *the immediately following command*. | |
6005 | |
6006 So if the immediately following command is a command to read or | |
6007 write a file, it uses the specified coding system for that file. | |
6008 | |
6009 If the immediately following command does not use the coding system, | |
6010 then C-x RET c ultimately has no effect. | |
6011 | |
6012 For example, C-x RET c iso-8859-1 RET C-x C-f temp RET | |
6013 visits the file `temp' treating it as ISO Latin-1. | |
6014 | |
6015 *** You can specify the coding system for a file using the -*- | |
6016 construct. Include `coding: CODINGSYSTEM;' inside the -*-...-*- | |
6017 to specify use of coding system CODINGSYSTEM. You can also | |
6018 specify the coding system in a local variable list at the end | |
6019 of the file. | |
6020 | |
6021 *** The command C-x RET t (set-terminal-coding-system) specifies | |
6022 the coding system for terminal output. If you specify a character | |
6023 code for terminal output, all characters output to the terminal are | |
6024 translated into that character code. | |
6025 | |
6026 This feature is useful for certain character-only terminals built in | |
6027 various countries to support the languages of those countries. | |
6028 | |
6029 By default, output to the terminal is not translated at all. | |
6030 | |
6031 *** The command C-x RET k (set-keyboard-coding-system) specifies | |
6032 the coding system for keyboard input. | |
6033 | |
6034 Character code translation of keyboard input is useful for terminals | |
6035 with keys that send non-ASCII graphic characters--for example, | |
6036 some terminals designed for ISO Latin-1 or subsets of it. | |
6037 | |
6038 By default, keyboard input is not translated at all. | |
6039 | |
6040 Character code translation of keyboard input is similar to using an | |
6041 input method, in that both define sequences of keyboard input that | |
6042 translate into single characters. However, input methods are designed | |
6043 to be convenient for interactive use, while the code translations are | |
6044 designed to work with terminals. | |
6045 | |
6046 *** The command C-x RET p (set-buffer-process-coding-system) | |
6047 specifies the coding system for input and output to a subprocess. | |
6048 This command applies to the current buffer; normally, each subprocess | |
6049 has its own buffer, and thus you can use this command to specify | |
6050 translation to and from a particular subprocess by giving the command | |
6051 in the corresponding buffer. | |
6052 | |
6053 By default, process input and output are not translated at all. | |
6054 | |
6055 *** The variable file-name-coding-system specifies the coding system | |
6056 to use for encoding file names before operating on them. | |
6057 It is also used for decoding file names obtained from the system. | |
6058 | |
6059 *** The command C-\ (toggle-input-method) activates or deactivates | |
6060 an input method. If no input method has been selected before, the | |
6061 command prompts for you to specify the language and input method you | |
6062 want to use. | |
6063 | |
6064 C-u C-\ (select-input-method) lets you switch to a different input | |
6065 method. C-h C-\ (or C-h I) describes the current input method. | |
6066 | |
6067 *** Some input methods remap the keyboard to emulate various keyboard | |
6068 layouts commonly used for particular scripts. How to do this | |
6069 remapping properly depends on your actual keyboard layout. To specify | |
6070 which layout your keyboard has, use M-x quail-set-keyboard-layout. | |
6071 | |
6072 *** The command C-h C (describe-coding-system) displays | |
6073 the coding systems currently selected for various purposes, plus | |
6074 related information. | |
6075 | |
6076 *** The command C-h h (view-hello-file) displays a file called | |
6077 HELLO, which has examples of text in many languages, using various | |
6078 scripts. | |
6079 | |
6080 *** The command C-h L (describe-language-support) displays | |
6081 information about the support for a particular language. | |
6082 You specify the language as an argument. | |
6083 | |
6084 *** The mode line now contains a letter or character that identifies | |
6085 the coding system used in the visited file. It normally follows the | |
6086 first dash. | |
6087 | |
6088 A dash indicates the default state of affairs: no code conversion | |
6089 (except CRLF => newline if appropriate). `=' means no conversion | |
6090 whatsoever. The ISO 8859 coding systems are represented by digits | |
6091 1 through 9. Other coding systems are represented by letters: | |
6092 | |
6093 A alternativnyj (Russian) | |
6094 B big5 (Chinese) | |
6095 C cn-gb-2312 (Chinese) | |
6096 C iso-2022-cn (Chinese) | |
6097 D in-is13194-devanagari (Indian languages) | |
6098 E euc-japan (Japanese) | |
6099 I iso-2022-cjk or iso-2022-ss2 (Chinese, Japanese, Korean) | |
6100 J junet (iso-2022-7) or old-jis (iso-2022-jp-1978-irv) (Japanese) | |
6101 K euc-korea (Korean) | |
6102 R koi8 (Russian) | |
6103 Q tibetan | |
6104 S shift_jis (Japanese) | |
6105 T lao | |
6106 T tis620 (Thai) | |
6107 V viscii or vscii (Vietnamese) | |
6108 i iso-2022-lock (Chinese, Japanese, Korean) | |
6109 k iso-2022-kr (Korean) | |
6110 v viqr (Vietnamese) | |
6111 z hz (Chinese) | |
6112 | |
6113 When you are using a character-only terminal (not a window system), | |
6114 two additional characters appear in between the dash and the file | |
6115 coding system. These two characters describe the coding system for | |
6116 keyboard input, and the coding system for terminal output. | |
6117 | |
6118 *** The new variable rmail-file-coding-system specifies the code | |
6119 conversion to use for RMAIL files. The default value is nil. | |
6120 | |
6121 When you read mail with Rmail, each message is decoded automatically | |
6122 into Emacs' internal format. This has nothing to do with | |
6123 rmail-file-coding-system. That variable controls reading and writing | |
6124 Rmail files themselves. | |
6125 | |
6126 *** The new variable sendmail-coding-system specifies the code | |
6127 conversion for outgoing mail. The default value is nil. | |
6128 | |
6129 Actually, there are three different ways of specifying the coding system | |
6130 for sending mail: | |
6131 | |
6132 - If you use C-x RET f in the mail buffer, that takes priority. | |
6133 - Otherwise, if you set sendmail-coding-system non-nil, that specifies it. | |
6134 - Otherwise, the default coding system for new files is used, | |
6135 if that is non-nil. That comes from your language environment. | |
6136 - Otherwise, Latin-1 is used. | |
6137 | |
6138 *** The command C-h t (help-with-tutorial) accepts a prefix argument | |
6139 to specify the language for the tutorial file. Currently, English, | |
6140 Japanese, Korean and Thai are supported. We welcome additional | |
6141 translations. | |
6142 | |
6143 ** An easy new way to visit a file with no code or format conversion | |
6144 of any kind: Use M-x find-file-literally. There is also a command | |
6145 insert-file-literally which inserts a file into the current buffer | |
6146 without any conversion. | |
6147 | |
6148 ** C-q's handling of octal character codes is changed. | |
6149 You can now specify any number of octal digits. | |
6150 RET terminates the digits and is discarded; | |
6151 any other non-digit terminates the digits and is then used as input. | |
6152 | |
6153 ** There are new commands for looking up Info documentation for | |
6154 functions, variables and file names used in your programs. | |
6155 | |
6156 Type M-x info-lookup-symbol to look up a symbol in the buffer at point. | |
6157 Type M-x info-lookup-file to look up a file in the buffer at point. | |
6158 | |
6159 Precisely which Info files are used to look it up depends on the major | |
6160 mode. For example, in C mode, the GNU libc manual is used. | |
6161 | |
6162 ** M-TAB in most programming language modes now runs the command | |
6163 complete-symbol. This command performs completion on the symbol name | |
6164 in the buffer before point. | |
6165 | |
6166 With a numeric argument, it performs completion based on the set of | |
6167 symbols documented in the Info files for the programming language that | |
6168 you are using. | |
6169 | |
6170 With no argument, it does completion based on the current tags tables, | |
6171 just like the old binding of M-TAB (complete-tag). | |
6172 | |
6173 ** File locking works with NFS now. | |
6174 | |
6175 The lock file for FILENAME is now a symbolic link named .#FILENAME, | |
6176 in the same directory as FILENAME. | |
6177 | |
6178 This means that collision detection between two different machines now | |
6179 works reasonably well; it also means that no file server or directory | |
6180 can become a bottleneck. | |
6181 | |
6182 The new method does have drawbacks. It means that collision detection | |
6183 does not operate when you edit a file in a directory where you cannot | |
6184 create new files. Collision detection also doesn't operate when the | |
6185 file server does not support symbolic links. But these conditions are | |
6186 rare, and the ability to have collision detection while using NFS is | |
6187 so useful that the change is worth while. | |
6188 | |
6189 When Emacs or a system crashes, this may leave behind lock files which | |
6190 are stale. So you may occasionally get warnings about spurious | |
6191 collisions. When you determine that the collision is spurious, just | |
6192 tell Emacs to go ahead anyway. | |
6193 | |
6194 ** If you wish to use Show Paren mode to display matching parentheses, | |
6195 it is no longer sufficient to load paren.el. Instead you must call | |
6196 show-paren-mode. | |
6197 | |
6198 ** If you wish to use Delete Selection mode to replace a highlighted | |
6199 selection when you insert new text, it is no longer sufficient to load | |
6200 delsel.el. Instead you must call the function delete-selection-mode. | |
6201 | |
6202 ** If you wish to use Partial Completion mode to complete partial words | |
6203 within symbols or filenames, it is no longer sufficient to load | |
6204 complete.el. Instead you must call the function partial-completion-mode. | |
6205 | |
6206 ** If you wish to use uniquify to rename buffers for you, | |
6207 it is no longer sufficient to load uniquify.el. You must also | |
6208 set uniquify-buffer-name-style to one of the non-nil legitimate values. | |
6209 | |
6210 ** Changes in View mode. | |
6211 | |
6212 *** Several new commands are available in View mode. | |
6213 Do H in view mode for a list of commands. | |
6214 | |
6215 *** There are two new commands for entering View mode: | |
6216 view-file-other-frame and view-buffer-other-frame. | |
6217 | |
6218 *** Exiting View mode does a better job of restoring windows to their | |
6219 previous state. | |
6220 | |
6221 *** New customization variable view-scroll-auto-exit. If non-nil, | |
6222 scrolling past end of buffer makes view mode exit. | |
6223 | |
6224 *** New customization variable view-exits-all-viewing-windows. If | |
6225 non-nil, view-mode will at exit restore all windows viewing buffer, | |
6226 not just the selected window. | |
6227 | |
6228 *** New customization variable view-read-only. If non-nil, visiting a | |
6229 read-only file automatically enters View mode, and toggle-read-only | |
6230 turns View mode on or off. | |
6231 | |
6232 *** New customization variable view-remove-frame-by-deleting controls | |
6233 how to remove a not needed frame at view mode exit. If non-nil, | |
6234 delete the frame, if nil make an icon of it. | |
6235 | |
6236 ** C-x v l, the command to print a file's version control log, | |
6237 now positions point at the entry for the file's current branch version. | |
6238 | |
6239 ** C-x v =, the command to compare a file with the last checked-in version, | |
6240 has a new feature. If the file is currently not locked, so that it is | |
6241 presumably identical to the last checked-in version, the command now asks | |
6242 which version to compare with. | |
6243 | |
6244 ** When using hideshow.el, incremental search can temporarily show hidden | |
6245 blocks if a match is inside the block. | |
6246 | |
6247 The block is hidden again if the search is continued and the next match | |
6248 is outside the block. By customizing the variable | |
6249 isearch-hide-immediately you can choose to hide all the temporarily | |
6250 shown blocks only when exiting from incremental search. | |
6251 | |
6252 By customizing the variable hs-isearch-open you can choose what kind | |
6253 of blocks to temporarily show during isearch: comment blocks, code | |
6254 blocks, all of them or none. | |
6255 | |
6256 ** The new command C-x 4 0 (kill-buffer-and-window) kills the | |
6257 current buffer and deletes the selected window. It asks for | |
6258 confirmation first. | |
6259 | |
6260 ** C-x C-w, which saves the buffer into a specified file name, | |
6261 now changes the major mode according to that file name. | |
6262 However, the mode will not be changed if | |
6263 (1) a local variables list or the `-*-' line specifies a major mode, or | |
6264 (2) the current major mode is a "special" mode, | |
6265 not suitable for ordinary files, or | |
6266 (3) the new file name does not particularly specify any mode. | |
6267 | |
6268 This applies to M-x set-visited-file-name as well. | |
6269 | |
6270 However, if you set change-major-mode-with-file-name to nil, then | |
6271 these commands do not change the major mode. | |
6272 | |
6273 ** M-x occur changes. | |
6274 | |
6275 *** If the argument to M-x occur contains upper case letters, | |
6276 it performs a case-sensitive search. | |
6277 | |
6278 *** In the *Occur* buffer made by M-x occur, | |
6279 if you type g or M-x revert-buffer, this repeats the search | |
6280 using the same regular expression and the same buffer as before. | |
6281 | |
6282 ** In Transient Mark mode, the region in any one buffer is highlighted | |
6283 in just one window at a time. At first, it is highlighted in the | |
6284 window where you set the mark. The buffer's highlighting remains in | |
6285 that window unless you select to another window which shows the same | |
6286 buffer--then the highlighting moves to that window. | |
6287 | |
6288 ** The feature to suggest key bindings when you use M-x now operates | |
6289 after the command finishes. The message suggesting key bindings | |
6290 appears temporarily in the echo area. The previous echo area contents | |
6291 come back after a few seconds, in case they contain useful information. | |
6292 | |
6293 ** Each frame now independently records the order for recently | |
6294 selected buffers, so that the default for C-x b is now based on the | |
6295 buffers recently selected in the selected frame. | |
6296 | |
6297 ** Outline mode changes. | |
6298 | |
6299 *** Outline mode now uses overlays (this is the former noutline.el). | |
6300 | |
6301 *** Incremental searches skip over invisible text in Outline mode. | |
6302 | |
6303 ** When a minibuffer window is active but not the selected window, if | |
6304 you try to use the minibuffer, you used to get a nested minibuffer. | |
6305 Now, this not only gives an error, it also cancels the minibuffer that | |
6306 was already active. | |
6307 | |
6308 The motive for this change is so that beginning users do not | |
6309 unknowingly move away from minibuffers, leaving them active, and then | |
6310 get confused by it. | |
6311 | |
6312 If you want to be able to have recursive minibuffers, you must | |
6313 set enable-recursive-minibuffers to non-nil. | |
6314 | |
6315 ** Changes in dynamic abbrevs. | |
6316 | |
6317 *** Expanding dynamic abbrevs with M-/ is now smarter about case | |
6318 conversion. If the expansion has mixed case not counting the first | |
6319 character, and the abbreviation matches the beginning of the expansion | |
6320 including case, then the expansion is copied verbatim. | |
6321 | |
6322 The expansion is also copied verbatim if the abbreviation itself has | |
6323 mixed case. And using SPC M-/ to copy an additional word always | |
6324 copies it verbatim except when the previous copied word is all caps. | |
6325 | |
6326 *** The values of `dabbrev-case-replace' and `dabbrev-case-fold-search' | |
6327 are no longer Lisp expressions. They have simply three possible | |
6328 values. | |
6329 | |
6330 `dabbrev-case-replace' has these three values: nil (don't preserve | |
6331 case), t (do), or `case-replace' (do like M-x query-replace). | |
6332 `dabbrev-case-fold-search' has these three values: nil (don't ignore | |
6333 case), t (do), or `case-fold-search' (do like search). | |
6334 | |
6335 ** Minibuffer history lists are truncated automatically now to a | |
6336 certain length. The variable history-length specifies how long they | |
6337 can be. The default value is 30. | |
6338 | |
6339 ** Changes in Mail mode. | |
6340 | |
6341 *** The key C-x m no longer runs the `mail' command directly. | |
6342 Instead, it runs the command `compose-mail', which invokes the mail | |
6343 composition mechanism you have selected with the variable | |
6344 `mail-user-agent'. The default choice of user agent is | |
6345 `sendmail-user-agent', which gives behavior compatible with the old | |
6346 behavior. | |
6347 | |
6348 C-x 4 m now runs compose-mail-other-window, and C-x 5 m runs | |
6349 compose-mail-other-frame. | |
6350 | |
6351 *** While composing a reply to a mail message, from Rmail, you can use | |
6352 the command C-c C-r to cite just the region from the message you are | |
6353 replying to. This copies the text which is the selected region in the | |
6354 buffer that shows the original message. | |
6355 | |
6356 *** The command C-c C-i inserts a file at the end of the message, | |
6357 with separator lines around the contents. | |
6358 | |
6359 *** The command M-x expand-mail-aliases expands all mail aliases | |
6360 in suitable mail headers. Emacs automatically extracts mail alias | |
6361 definitions from your mail alias file (e.g., ~/.mailrc). You do not | |
6362 need to expand mail aliases yourself before sending mail. | |
6363 | |
6364 *** New features in the mail-complete command. | |
6365 | |
6366 **** The mail-complete command now inserts the user's full name, | |
6367 for local users or if that is known. The variable mail-complete-style | |
6368 controls the style to use, and whether to do this at all. | |
6369 Its values are like those of mail-from-style. | |
6370 | |
6371 **** The variable mail-passwd-command lets you specify a shell command | |
6372 to run to fetch a set of password-entries that add to the ones in | |
6373 /etc/passwd. | |
6374 | |
6375 **** The variable mail-passwd-file now specifies a list of files to read | |
6376 to get the list of user ids. By default, one file is used: | |
6377 /etc/passwd. | |
6378 | |
6379 ** You can "quote" a file name to inhibit special significance of | |
6380 special syntax, by adding `/:' to the beginning. Thus, if you have a | |
6381 directory named `/foo:', you can prevent it from being treated as a | |
6382 reference to a remote host named `foo' by writing it as `/:/foo:'. | |
6383 | |
6384 Emacs uses this new construct automatically when necessary, such as | |
6385 when you start it with a working directory whose name might otherwise | |
6386 be taken to be magic. | |
6387 | |
6388 ** There is a new command M-x grep-find which uses find to select | |
6389 files to search through, and grep to scan them. The output is | |
6390 available in a Compile mode buffer, as with M-x grep. | |
6391 | |
6392 M-x grep now uses the -e option if the grep program supports that. | |
6393 (-e prevents problems if the search pattern starts with a dash.) | |
6394 | |
6395 ** In Dired, the & command now flags for deletion the files whose names | |
6396 suggest they are probably not needed in the long run. | |
6397 | |
6398 In Dired, * is now a prefix key for mark-related commands. | |
6399 | |
6400 new key dired.el binding old key | |
6401 ------- ---------------- ------- | |
6402 * c dired-change-marks c | |
6403 * m dired-mark m | |
6404 * * dired-mark-executables * (binding deleted) | |
6405 * / dired-mark-directories / (binding deleted) | |
6406 * @ dired-mark-symlinks @ (binding deleted) | |
6407 * u dired-unmark u | |
6408 * DEL dired-unmark-backward DEL | |
6409 * ? dired-unmark-all-files M-C-? | |
6410 * ! dired-unmark-all-marks | |
6411 * % dired-mark-files-regexp % m | |
6412 * C-n dired-next-marked-file M-} | |
6413 * C-p dired-prev-marked-file M-{ | |
6414 | |
6415 ** Rmail changes. | |
6416 | |
6417 *** When Rmail cannot convert your incoming mail into Babyl format, it | |
6418 saves the new mail in the file RMAILOSE.n, where n is an integer | |
6419 chosen to make a unique name. This way, Rmail will not keep crashing | |
6420 each time you run it. | |
6421 | |
6422 *** In Rmail, the variable rmail-summary-line-count-flag now controls | |
6423 whether to include the line count in the summary. Non-nil means yes. | |
6424 | |
6425 *** In Rmail summary buffers, d and C-d (the commands to delete | |
6426 messages) now take repeat counts as arguments. A negative argument | |
6427 means to move in the opposite direction. | |
6428 | |
6429 *** In Rmail, the t command now takes an optional argument which lets | |
6430 you specify whether to show the message headers in full or pruned. | |
6431 | |
6432 *** In Rmail, the new command w (rmail-output-body-to-file) writes | |
6433 just the body of the current message into a file, without the headers. | |
6434 It takes the file name from the message subject, by default, but you | |
6435 can edit that file name in the minibuffer before it is actually used | |
6436 for output. | |
6437 | |
6438 ** Gnus changes. | |
6439 | |
6440 *** nntp.el has been totally rewritten in an asynchronous fashion. | |
6441 | |
6442 *** Article prefetching functionality has been moved up into | |
6443 Gnus. | |
6444 | |
6445 *** Scoring can now be performed with logical operators like | |
6446 `and', `or', `not', and parent redirection. | |
6447 | |
6448 *** Article washing status can be displayed in the | |
6449 article mode line. | |
6450 | |
6451 *** gnus.el has been split into many smaller files. | |
6452 | |
6453 *** Suppression of duplicate articles based on Message-ID. | |
6454 | |
6455 (setq gnus-suppress-duplicates t) | |
6456 | |
6457 *** New variables for specifying what score and adapt files | |
6458 are to be considered home score and adapt files. See | |
6459 `gnus-home-score-file' and `gnus-home-adapt-files'. | |
6460 | |
6461 *** Groups can inherit group parameters from parent topics. | |
6462 | |
6463 *** Article editing has been revamped and is now usable. | |
6464 | |
6465 *** Signatures can be recognized in more intelligent fashions. | |
6466 See `gnus-signature-separator' and `gnus-signature-limit'. | |
6467 | |
6468 *** Summary pick mode has been made to look more nn-like. | |
6469 Line numbers are displayed and the `.' command can be | |
6470 used to pick articles. | |
6471 | |
6472 *** Commands for moving the .newsrc.eld from one server to | |
6473 another have been added. | |
6474 | |
6475 `M-x gnus-change-server' | |
6476 | |
6477 *** A way to specify that "uninteresting" fields be suppressed when | |
6478 generating lines in buffers. | |
6479 | |
6480 *** Several commands in the group buffer can be undone with | |
6481 `M-C-_'. | |
6482 | |
6483 *** Scoring can be done on words using the new score type `w'. | |
6484 | |
6485 *** Adaptive scoring can be done on a Subject word-by-word basis: | |
6486 | |
6487 (setq gnus-use-adaptive-scoring '(word)) | |
6488 | |
6489 *** Scores can be decayed. | |
6490 | |
6491 (setq gnus-decay-scores t) | |
6492 | |
6493 *** Scoring can be performed using a regexp on the Date header. The | |
6494 Date is normalized to compact ISO 8601 format first. | |
6495 | |
6496 *** A new command has been added to remove all data on articles from | |
6497 the native server. | |
6498 | |
6499 `M-x gnus-group-clear-data-on-native-groups' | |
6500 | |
6501 *** A new command for reading collections of documents | |
6502 (nndoc with nnvirtual on top) has been added -- `M-C-d'. | |
6503 | |
6504 *** Process mark sets can be pushed and popped. | |
6505 | |
6506 *** A new mail-to-news backend makes it possible to post | |
6507 even when the NNTP server doesn't allow posting. | |
6508 | |
6509 *** A new backend for reading searches from Web search engines | |
6510 (DejaNews, Alta Vista, InReference) has been added. | |
6511 | |
6512 Use the `G w' command in the group buffer to create such | |
6513 a group. | |
6514 | |
6515 *** Groups inside topics can now be sorted using the standard | |
6516 sorting functions, and each topic can be sorted independently. | |
6517 | |
6518 See the commands under the `T S' submap. | |
6519 | |
6520 *** Subsets of the groups can be sorted independently. | |
6521 | |
6522 See the commands under the `G P' submap. | |
6523 | |
6524 *** Cached articles can be pulled into the groups. | |
6525 | |
6526 Use the `Y c' command. | |
6527 | |
6528 *** Score files are now applied in a more reliable order. | |
6529 | |
6530 *** Reports on where mail messages end up can be generated. | |
6531 | |
6532 `M-x nnmail-split-history' | |
6533 | |
6534 *** More hooks and functions have been added to remove junk | |
6535 from incoming mail before saving the mail. | |
6536 | |
6537 See `nnmail-prepare-incoming-header-hook'. | |
6538 | |
6539 *** The nnml mail backend now understands compressed article files. | |
6540 | |
6541 *** To enable Gnus to read/post multi-lingual articles, you must execute | |
6542 the following code, for instance, in your .emacs. | |
6543 | |
6544 (add-hook 'gnus-startup-hook 'gnus-mule-initialize) | |
6545 | |
6546 Then, when you start Gnus, it will decode non-ASCII text automatically | |
6547 and show appropriate characters. (Note: if you are using gnus-mime | |
6548 from the SEMI package, formerly known as TM, you should NOT add this | |
6549 hook to gnus-startup-hook; gnus-mime has its own method of handling | |
6550 this issue.) | |
6551 | |
6552 Since it is impossible to distinguish all coding systems | |
6553 automatically, you may need to specify a choice of coding system for a | |
6554 particular news group. This can be done by: | |
6555 | |
6556 (gnus-mule-add-group NEWSGROUP 'CODING-SYSTEM) | |
6557 | |
6558 Here NEWSGROUP should be a string which names a newsgroup or a tree | |
6559 of newsgroups. If NEWSGROUP is "XXX.YYY", all news groups under | |
6560 "XXX.YYY" (including "XXX.YYY.ZZZ") will use the specified coding | |
6561 system. CODING-SYSTEM specifies which coding system to use (for both | |
6562 for reading and posting). | |
6563 | |
6564 CODING-SYSTEM can also be a cons cell of the form | |
6565 (READ-CODING-SYSTEM . POST-CODING-SYSTEM) | |
6566 Then READ-CODING-SYSTEM is used when you read messages from the | |
6567 newsgroups, while POST-CODING-SYSTEM is used when you post messages | |
6568 there. | |
6569 | |
6570 Emacs knows the right coding systems for certain newsgroups by | |
6571 default. Here are some of these default settings: | |
6572 | |
6573 (gnus-mule-add-group "fj" 'iso-2022-7) | |
6574 (gnus-mule-add-group "alt.chinese.text" 'hz-gb-2312) | |
6575 (gnus-mule-add-group "alt.hk" 'hz-gb-2312) | |
6576 (gnus-mule-add-group "alt.chinese.text.big5" 'cn-big5) | |
6577 (gnus-mule-add-group "soc.culture.vietnamese" '(nil . viqr)) | |
6578 | |
6579 When you reply by mail to an article, these settings are ignored; | |
6580 the mail is encoded according to sendmail-coding-system, as usual. | |
6581 | |
6582 ** CC mode changes. | |
6583 | |
6584 *** If you edit primarily one style of C (or C++, Objective-C, Java) | |
6585 code, you may want to make the CC Mode style variables have global | |
6586 values so that you can set them directly in your .emacs file. To do | |
6587 this, set c-style-variables-are-local-p to nil in your .emacs file. | |
6588 Note that this only takes effect if you do it *before* cc-mode.el is | |
6589 loaded. | |
6590 | |
6591 If you typically edit more than one style of C (or C++, Objective-C, | |
6592 Java) code in a single Emacs session, you may want to make the CC Mode | |
6593 style variables have buffer local values. By default, all buffers | |
6594 share the same style variable settings; to make them buffer local, set | |
6595 c-style-variables-are-local-p to t in your .emacs file. Note that you | |
6596 must do this *before* CC Mode is loaded. | |
6597 | |
6598 *** The new variable c-indentation-style holds the C style name | |
6599 of the current buffer. | |
6600 | |
6601 *** The variable c-block-comments-indent-p has been deleted, because | |
6602 it is no longer necessary. C mode now handles all the supported styles | |
6603 of block comments, with no need to say which one you will use. | |
6604 | |
6605 *** There is a new indentation style "python", which specifies the C | |
6606 style that the Python developers like. | |
6607 | |
6608 *** There is a new c-cleanup-list option: brace-elseif-brace. | |
6609 This says to put ...} else if (...) {... on one line, | |
6610 just as brace-else-brace says to put ...} else {... on one line. | |
6611 | |
6612 ** VC Changes [new] | |
6613 | |
6614 ** In vc-retrieve-snapshot (C-x v r), if you don't specify a snapshot | |
6615 name, it retrieves the *latest* versions of all files in the current | |
6616 directory and its subdirectories (aside from files already locked). | |
6617 | |
6618 This feature is useful if your RCS directory is a link to a common | |
6619 master directory, and you want to pick up changes made by other | |
6620 developers. | |
6621 | |
6622 You can do the same thing for an individual file by typing C-u C-x C-q | |
6623 RET in a buffer visiting that file. | |
6624 | |
6625 *** VC can now handle files under CVS that are being "watched" by | |
6626 other developers. Such files are made read-only by CVS. To get a | |
6627 writable copy, type C-x C-q in a buffer visiting such a file. VC then | |
6628 calls "cvs edit", which notifies the other developers of it. | |
6629 | |
6630 *** vc-version-diff (C-u C-x v =) now suggests reasonable defaults for | |
6631 version numbers, based on the current state of the file. | |
6632 | |
6633 ** Calendar changes. | |
6634 | |
6635 A new function, list-holidays, allows you list holidays or subclasses | |
6636 of holidays for ranges of years. Related menu items allow you do this | |
6637 for the year of the selected date, or the following/previous years. | |
6638 | |
6639 ** ps-print changes | |
6640 | |
6641 There are some new user variables for customizing the page layout. | |
6642 | |
6643 *** Paper size, paper orientation, columns | |
6644 | |
6645 The variable `ps-paper-type' determines the size of paper ps-print | |
6646 formats for; it should contain one of the symbols: | |
6647 `a4' `a3' `letter' `legal' `letter-small' `tabloid' | |
6648 `ledger' `statement' `executive' `a4small' `b4' `b5' | |
6649 It defaults to `letter'. | |
6650 If you need other sizes, see the variable `ps-page-dimensions-database'. | |
6651 | |
6652 The variable `ps-landscape-mode' determines the orientation | |
6653 of the printing on the page. nil, the default, means "portrait" mode, | |
6654 non-nil means "landscape" mode. | |
6655 | |
6656 The variable `ps-number-of-columns' must be a positive integer. | |
6657 It determines the number of columns both in landscape and portrait mode. | |
6658 It defaults to 1. | |
6659 | |
6660 *** Horizontal layout | |
6661 | |
6662 The horizontal layout is determined by the variables | |
6663 `ps-left-margin', `ps-inter-column', and `ps-right-margin'. | |
6664 All are measured in points. | |
6665 | |
6666 *** Vertical layout | |
6667 | |
6668 The vertical layout is determined by the variables | |
6669 `ps-bottom-margin', `ps-top-margin', and `ps-header-offset'. | |
6670 All are measured in points. | |
6671 | |
6672 *** Headers | |
6673 | |
6674 If the variable `ps-print-header' is nil, no header is printed. Then | |
6675 `ps-header-offset' is not relevant and `ps-top-margin' represents the | |
6676 margin above the text. | |
6677 | |
6678 If the variable `ps-print-header-frame' is non-nil, a gaudy | |
6679 framing box is printed around the header. | |
6680 | |
6681 The contents of the header are determined by `ps-header-lines', | |
6682 `ps-show-n-of-n', `ps-left-header' and `ps-right-header'. | |
6683 | |
6684 The height of the header is determined by `ps-header-line-pad', | |
6685 `ps-header-font-family', `ps-header-title-font-size' and | |
6686 `ps-header-font-size'. | |
6687 | |
6688 *** Font managing | |
6689 | |
6690 The variable `ps-font-family' determines which font family is to be | |
6691 used for ordinary text. Its value must be a key symbol in the alist | |
6692 `ps-font-info-database'. You can add other font families by adding | |
6693 elements to this alist. | |
6694 | |
6695 The variable `ps-font-size' determines the size of the font | |
6696 for ordinary text. It defaults to 8.5 points. | |
6697 | |
6698 ** hideshow changes. | |
6699 | |
6700 *** now supports hiding of blocks of single line comments (like // for | |
6701 C++, ; for lisp). | |
6702 | |
6703 *** Support for java-mode added. | |
6704 | |
6705 *** When doing `hs-hide-all' it is now possible to also hide the comments | |
6706 in the file if `hs-hide-comments-when-hiding-all' is set. | |
6707 | |
6708 *** The new function `hs-hide-initial-comment' hides the the comments at | |
6709 the beginning of the files. Finally those huge RCS logs don't stay in your | |
6710 way! This is run by default when entering the `hs-minor-mode'. | |
6711 | |
6712 *** Now uses overlays instead of `selective-display', so is more | |
6713 robust and a lot faster. | |
6714 | |
6715 *** A block beginning can span multiple lines. | |
6716 | |
6717 *** The new variable `hs-show-hidden-short-form' if t, directs hideshow | |
6718 to show only the beginning of a block when it is hidden. See the | |
6719 documentation for more details. | |
6720 | |
6721 ** Changes in Enriched mode. | |
6722 | |
6723 *** When you visit a file in enriched-mode, Emacs will make sure it is | |
6724 filled to the current fill-column. This behavior is now independent | |
6725 of the size of the window. When you save the file, the fill-column in | |
6726 use is stored as well, so that the whole buffer need not be refilled | |
6727 the next time unless the fill-column is different. | |
6728 | |
6729 *** use-hard-newlines is now a minor mode. When it is enabled, Emacs | |
6730 distinguishes between hard and soft newlines, and treats hard newlines | |
6731 as paragraph boundaries. Otherwise all newlines inserted are marked | |
6732 as soft, and paragraph boundaries are determined solely from the text. | |
6733 | |
6734 ** Font Lock mode | |
6735 | |
6736 *** Custom support | |
6737 | |
6738 The variables font-lock-face-attributes, font-lock-display-type and | |
6739 font-lock-background-mode are now obsolete; the recommended way to specify the | |
6740 faces to use for Font Lock mode is with M-x customize-group on the new custom | |
6741 group font-lock-highlighting-faces. If you set font-lock-face-attributes in | |
6742 your ~/.emacs file, Font Lock mode will respect its value. However, you should | |
6743 consider converting from setting that variable to using M-x customize. | |
6744 | |
6745 You can still use X resources to specify Font Lock face appearances. | |
6746 | |
6747 *** Maximum decoration | |
6748 | |
6749 Fontification now uses the maximum level of decoration supported by | |
6750 default. Previously, fontification used a mode-specific default level | |
6751 of decoration, which is typically the minimum level of decoration | |
6752 supported. You can set font-lock-maximum-decoration to nil | |
6753 to get the old behavior. | |
6754 | |
6755 *** New support | |
6756 | |
6757 Support is now provided for Java, Objective-C, AWK and SIMULA modes. | |
6758 | |
6759 Note that Font Lock mode can be turned on without knowing exactly what modes | |
6760 support Font Lock mode, via the command global-font-lock-mode. | |
6761 | |
6762 *** Configurable support | |
6763 | |
6764 Support for C, C++, Objective-C and Java can be more easily configured for | |
6765 additional types and classes via the new variables c-font-lock-extra-types, | |
6766 c++-font-lock-extra-types, objc-font-lock-extra-types and, you guessed it, | |
6767 java-font-lock-extra-types. These value of each of these variables should be a | |
6768 list of regexps matching the extra type names. For example, the default value | |
6769 of c-font-lock-extra-types is ("\\sw+_t") which means fontification follows the | |
6770 convention that C type names end in _t. This results in slower fontification. | |
6771 | |
6772 Of course, you can change the variables that specify fontification in whatever | |
6773 way you wish, typically by adding regexps. However, these new variables make | |
6774 it easier to make specific and common changes for the fontification of types. | |
6775 | |
6776 *** Adding highlighting patterns to existing support | |
6777 | |
6778 You can use the new function font-lock-add-keywords to add your own | |
6779 highlighting patterns, such as for project-local or user-specific constructs, | |
6780 for any mode. | |
6781 | |
6782 For example, to highlight `FIXME:' words in C comments, put: | |
6783 | |
6784 (font-lock-add-keywords 'c-mode '(("\\<FIXME:" 0 font-lock-warning-face t))) | |
6785 | |
6786 in your ~/.emacs. | |
6787 | |
6788 *** New faces | |
6789 | |
6790 Font Lock now defines two new faces, font-lock-builtin-face and | |
6791 font-lock-warning-face. These are intended to highlight builtin keywords, | |
6792 distinct from a language's normal keywords, and objects that should be brought | |
6793 to user attention, respectively. Various modes now use these new faces. | |
6794 | |
6795 *** Changes to fast-lock support mode | |
6796 | |
6797 The fast-lock package, one of the two Font Lock support modes, can now process | |
6798 cache files silently. You can use the new variable fast-lock-verbose, in the | |
6799 same way as font-lock-verbose, to control this feature. | |
6800 | |
6801 *** Changes to lazy-lock support mode | |
6802 | |
6803 The lazy-lock package, one of the two Font Lock support modes, can now fontify | |
6804 according to the true syntactic context relative to other lines. You can use | |
6805 the new variable lazy-lock-defer-contextually to control this feature. If | |
6806 non-nil, changes to the buffer will cause subsequent lines in the buffer to be | |
6807 refontified after lazy-lock-defer-time seconds of idle time. If nil, then only | |
6808 the modified lines will be refontified; this is the same as the previous Lazy | |
6809 Lock mode behaviour and the behaviour of Font Lock mode. | |
6810 | |
6811 This feature is useful in modes where strings or comments can span lines. | |
6812 For example, if a string or comment terminating character is deleted, then if | |
6813 this feature is enabled subsequent lines in the buffer will be correctly | |
6814 refontified to reflect their new syntactic context. Previously, only the line | |
6815 containing the deleted character would be refontified and you would have to use | |
6816 the command M-g M-g (font-lock-fontify-block) to refontify some lines. | |
6817 | |
6818 As a consequence of this new feature, two other variables have changed: | |
6819 | |
6820 Variable `lazy-lock-defer-driven' is renamed `lazy-lock-defer-on-scrolling'. | |
6821 Variable `lazy-lock-defer-time' can now only be a time, i.e., a number. | |
6822 Buffer modes for which on-the-fly deferral applies can be specified via the | |
6823 new variable `lazy-lock-defer-on-the-fly'. | |
6824 | |
6825 If you set these variables in your ~/.emacs, then you may have to change those | |
6826 settings. | |
6827 | |
6828 ** Ada mode changes. | |
6829 | |
6830 *** There is now better support for using find-file.el with Ada mode. | |
6831 If you switch between spec and body, the cursor stays in the same | |
6832 procedure (modulo overloading). If a spec has no body file yet, but | |
6833 you try to switch to its body file, Ada mode now generates procedure | |
6834 stubs. | |
6835 | |
6836 *** There are two new commands: | |
6837 - `ada-make-local' : invokes gnatmake on the current buffer | |
6838 - `ada-check-syntax' : check syntax of current buffer. | |
6839 | |
6840 The user options `ada-compiler-make', `ada-make-options', | |
6841 `ada-language-version', `ada-compiler-syntax-check', and | |
6842 `ada-compile-options' are used within these commands. | |
6843 | |
6844 *** Ada mode can now work with Outline minor mode. The outline level | |
6845 is calculated from the indenting, not from syntactic constructs. | |
6846 Outlining does not work if your code is not correctly indented. | |
6847 | |
6848 *** The new function `ada-gnat-style' converts the buffer to the style of | |
6849 formatting used in GNAT. It places two blanks after a comment start, | |
6850 places one blank between a word end and an opening '(', and puts one | |
6851 space between a comma and the beginning of a word. | |
6852 | |
6853 ** Scheme mode changes. | |
6854 | |
6855 *** Scheme mode indentation now uses many of the facilities of Lisp | |
6856 mode; therefore, the variables to customize it are the variables used | |
6857 for Lisp mode which have names starting with `lisp-'. The variables | |
6858 with names starting with `scheme-' which used to do this no longer | |
6859 have any effect. | |
6860 | |
6861 If you want to use different indentation for Scheme and Lisp, this is | |
6862 still possible, but now you must do it by adding a hook to | |
6863 scheme-mode-hook, which could work by setting the `lisp-' indentation | |
6864 variables as buffer-local variables. | |
6865 | |
6866 *** DSSSL mode is a variant of Scheme mode, for editing DSSSL scripts. | |
6867 Use M-x dsssl-mode. | |
6868 | |
6869 ** Changes to the emacsclient program | |
6870 | |
6871 *** If a socket can't be found, and environment variables LOGNAME or | |
6872 USER are set, emacsclient now looks for a socket based on the UID | |
6873 associated with the name. That is an emacsclient running as root | |
6874 can connect to an Emacs server started by a non-root user. | |
6875 | |
6876 *** The emacsclient program now accepts an option --no-wait which tells | |
6877 it to return immediately without waiting for you to "finish" the | |
6878 buffer in Emacs. | |
6879 | |
6880 *** The new option --alternate-editor allows to specify an editor to | |
6881 use if Emacs is not running. The environment variable | |
6882 ALTERNATE_EDITOR can be used for the same effect; the command line | |
6883 option takes precedence. | |
6884 | |
6885 ** M-x eldoc-mode enables a minor mode in which the echo area | |
6886 constantly shows the parameter list for function being called at point | |
6887 (in Emacs Lisp and Lisp Interaction modes only). | |
6888 | |
6889 ** C-x n d now runs the new command narrow-to-defun, | |
6890 which narrows the accessible parts of the buffer to just | |
6891 the current defun. | |
6892 | |
6893 ** Emacs now handles the `--' argument in the standard way; all | |
6894 following arguments are treated as ordinary file names. | |
6895 | |
6896 ** On MSDOS and Windows, the bookmark file is now called _emacs.bmk, | |
6897 and the saved desktop file is now called _emacs.desktop (truncated if | |
6898 necessary). | |
6899 | |
6900 ** When you kill a buffer that visits a file, | |
6901 if there are any registers that save positions in the file, | |
6902 these register values no longer become completely useless. | |
6903 If you try to go to such a register with C-x j, then you are | |
6904 asked whether to visit the file again. If you say yes, | |
6905 it visits the file and then goes to the same position. | |
6906 | |
6907 ** When you visit a file that changes frequently outside Emacs--for | |
6908 example, a log of output from a process that continues to run--it may | |
6909 be useful for Emacs to revert the file without querying you whenever | |
6910 you visit the file afresh with C-x C-f. | |
6911 | |
6912 You can request this behavior for certain files by setting the | |
6913 variable revert-without-query to a list of regular expressions. If a | |
6914 file's name matches any of these regular expressions, find-file and | |
6915 revert-buffer revert the buffer without asking for permission--but | |
6916 only if you have not edited the buffer text yourself. | |
6917 | |
6918 ** set-default-font has been renamed to set-frame-font | |
6919 since it applies only to the current frame. | |
6920 | |
6921 ** In TeX mode, you can use the variable tex-main-file to specify the | |
6922 file for tex-file to run TeX on. (By default, tex-main-file is nil, | |
6923 and tex-file runs TeX on the current visited file.) | |
6924 | |
6925 This is useful when you are editing a document that consists of | |
6926 multiple files. In each of the included files, you can set up a local | |
6927 variable list which specifies the top-level file of your document for | |
6928 tex-main-file. Then tex-file will run TeX on the whole document | |
6929 instead of just the file you are editing. | |
6930 | |
6931 ** RefTeX mode | |
6932 | |
6933 RefTeX mode is a new minor mode with special support for \label, \ref | |
6934 and \cite macros in LaTeX documents. RefTeX distinguishes labels of | |
6935 different environments (equation, figure, ...) and has full support for | |
6936 multifile documents. To use it, select a buffer with a LaTeX document and | |
6937 turn the mode on with M-x reftex-mode. Here are the main user commands: | |
6938 | |
6939 C-c ( reftex-label | |
6940 Creates a label semi-automatically. RefTeX is context sensitive and | |
6941 knows which kind of label is needed. | |
6942 | |
6943 C-c ) reftex-reference | |
6944 Offers in a menu all labels in the document, along with context of the | |
6945 label definition. The selected label is referenced as \ref{LABEL}. | |
6946 | |
6947 C-c [ reftex-citation | |
6948 Prompts for a regular expression and displays a list of matching BibTeX | |
6949 database entries. The selected entry is cited with a \cite{KEY} macro. | |
6950 | |
6951 C-c & reftex-view-crossref | |
6952 Views the cross reference of a \ref or \cite command near point. | |
6953 | |
6954 C-c = reftex-toc | |
6955 Shows a table of contents of the (multifile) document. From there you | |
6956 can quickly jump to every section. | |
6957 | |
6958 Under X, RefTeX installs a "Ref" menu in the menu bar, with additional | |
6959 commands. Press `?' to get help when a prompt mentions this feature. | |
6960 Full documentation and customization examples are in the file | |
6961 reftex.el. You can use the finder to view the file documentation: | |
6962 C-h p --> tex --> reftex.el | |
6963 | |
6964 ** Changes in BibTeX mode. | |
6965 | |
6966 *** Info documentation is now available. | |
6967 | |
6968 *** Don't allow parentheses in string constants anymore. This confused | |
6969 both the BibTeX program and Emacs BibTeX mode. | |
6970 | |
6971 *** Renamed variable bibtex-mode-user-optional-fields to | |
6972 bibtex-user-optional-fields. | |
6973 | |
6974 *** Removed variable bibtex-include-OPTannote | |
6975 (use bibtex-user-optional-fields instead). | |
6976 | |
6977 *** New interactive functions to copy and kill fields and complete | |
6978 entries to the BibTeX kill ring, from where they can be yanked back by | |
6979 appropriate functions. | |
6980 | |
6981 *** New interactive functions for repositioning and marking of | |
6982 entries. They are bound by default to M-C-l and M-C-h. | |
6983 | |
6984 *** New hook bibtex-clean-entry-hook. It is called after entry has | |
6985 been cleaned. | |
6986 | |
6987 *** New variable bibtex-field-delimiters, which replaces variables | |
6988 bibtex-field-{left|right}-delimiter. | |
6989 | |
6990 *** New variable bibtex-entry-delimiters to determine how entries | |
6991 shall be delimited. | |
6992 | |
6993 *** Allow preinitialization of fields. See documentation of | |
6994 bibtex-user-optional-fields, bibtex-entry-field-alist, and | |
6995 bibtex-include-OPTkey for details. | |
6996 | |
6997 *** Book and InBook entries require either an author or an editor | |
6998 field. This is now supported by bibtex.el. Alternative fields are | |
6999 prefixed with `ALT'. | |
7000 | |
7001 *** New variable bibtex-entry-format, which replaces variable | |
7002 bibtex-clean-entry-zap-empty-opts and allows specification of many | |
7003 formatting options performed on cleaning an entry (see variable | |
7004 documentation). | |
7005 | |
7006 *** Even more control on how automatic keys are generated. See | |
7007 documentation of bibtex-generate-autokey for details. Transcriptions | |
7008 for foreign languages other than German are now handled, too. | |
7009 | |
7010 *** New boolean user option bibtex-comma-after-last-field to decide if | |
7011 comma should be inserted at end of last field. | |
7012 | |
7013 *** New boolean user option bibtex-align-at-equal-sign to determine if | |
7014 alignment should be made at left side of field contents or at equal | |
7015 signs. New user options to control entry layout (e.g. indentation). | |
7016 | |
7017 *** New function bibtex-fill-entry to realign entries. | |
7018 | |
7019 *** New function bibtex-reformat to reformat region or buffer. | |
7020 | |
7021 *** New function bibtex-convert-alien to convert a BibTeX database | |
7022 from alien sources. | |
7023 | |
7024 *** New function bibtex-complete-key (similar to bibtex-complete-string) | |
7025 to complete prefix to a key defined in buffer. Mainly useful in | |
7026 crossref entries. | |
7027 | |
7028 *** New function bibtex-count-entries to count entries in buffer or | |
7029 region. | |
7030 | |
7031 *** Added support for imenu. | |
7032 | |
7033 *** The function `bibtex-validate' now checks current region instead | |
7034 of buffer if mark is active. Now it shows all errors of buffer in a | |
7035 `compilation mode' buffer. You can use the normal commands (e.g. | |
7036 `next-error') for compilation modes to jump to errors. | |
7037 | |
7038 *** New variable `bibtex-string-file-path' to determine where the files | |
7039 from `bibtex-string-files' are searched. | |
7040 | |
7041 ** Iso Accents mode now supports Latin-3 as an alternative. | |
7042 | |
7043 ** The command next-error now opens blocks hidden by hideshow. | |
7044 | |
7045 ** The function using-unix-filesystems has been replaced by the | |
7046 functions add-untranslated-filesystem and remove-untranslated-filesystem. | |
7047 Each of these functions takes the name of a drive letter or directory | |
7048 as an argument. | |
7049 | |
7050 When a filesystem is added as untranslated, all files on it are read | |
7051 and written in binary mode (no cr/lf translation is performed). | |
7052 | |
7053 ** browse-url changes | |
7054 | |
7055 *** New methods for: Grail (browse-url-generic), MMM (browse-url-mmm), | |
7056 Lynx in a separate xterm (browse-url-lynx-xterm) or in an Emacs window | |
7057 (browse-url-lynx-emacs), remote W3 (browse-url-w3-gnudoit), generic | |
7058 non-remote-controlled browsers (browse-url-generic) and associated | |
7059 customization variables. | |
7060 | |
7061 *** New commands `browse-url-of-region' and `browse-url'. | |
7062 | |
7063 *** URLs marked up with <URL:...> (RFC1738) work if broken across | |
7064 lines. Browsing methods can be associated with URL regexps | |
7065 (e.g. mailto: URLs) via `browse-url-browser-function'. | |
7066 | |
7067 ** Changes in Ediff | |
7068 | |
7069 *** Clicking Mouse-2 on a brief command description in Ediff control panel | |
7070 pops up the Info file for this command. | |
7071 | |
7072 *** There is now a variable, ediff-autostore-merges, which controls whether | |
7073 the result of a merge is saved in a file. By default, this is done only when | |
7074 merge is done from a session group (eg, when merging files in two different | |
7075 directories). | |
7076 | |
7077 *** Since Emacs 19.31 (this hasn't been announced before), Ediff can compare | |
7078 and merge groups of files residing in different directories, or revisions of | |
7079 files in the same directory. | |
7080 | |
7081 *** Since Emacs 19.31, Ediff can apply multi-file patches interactively. | |
7082 The patches must be in the context format or GNU unified format. (The bug | |
7083 related to the GNU format has now been fixed.) | |
7084 | |
7085 ** Changes in Viper | |
7086 | |
7087 *** The startup file is now .viper instead of .vip | |
7088 *** All variable/function names have been changed to start with viper- | |
7089 instead of vip-. | |
7090 *** C-\ now simulates the meta-key in all Viper states. | |
7091 *** C-z in Insert state now escapes to Vi for the duration of the next | |
7092 Viper command. In Vi and Insert states, C-z behaves as before. | |
7093 *** C-c \ escapes to Vi for one command if Viper is in Insert or Emacs states. | |
7094 *** _ is no longer the meta-key in Vi state. | |
7095 *** The variable viper-insert-state-cursor-color can be used to change cursor | |
7096 color when Viper is in insert state. | |
7097 *** If search lands the cursor near the top or the bottom of the window, | |
7098 Viper pulls the window up or down to expose more context. The variable | |
7099 viper-adjust-window-after-search controls this behavior. | |
7100 | |
7101 ** Etags changes. | |
7102 | |
7103 *** In C, C++, Objective C and Java, Etags tags global variables by | |
7104 default. The resulting tags files are inflated by 30% on average. | |
7105 Use --no-globals to turn this feature off. Etags can also tag | |
7106 variables which are members of structure-like constructs, but it does | |
7107 not by default. Use --members to turn this feature on. | |
7108 | |
7109 *** C++ member functions are now recognized as tags. | |
7110 | |
7111 *** Java is tagged like C++. In addition, "extends" and "implements" | |
7112 constructs are tagged. Files are recognised by the extension .java. | |
7113 | |
7114 *** Etags can now handle programs written in Postscript. Files are | |
7115 recognised by the extensions .ps and .pdb (Postscript with C syntax). | |
7116 In Postscript, tags are lines that start with a slash. | |
7117 | |
7118 *** Etags now handles Objective C and Objective C++ code. The usual C and | |
7119 C++ tags are recognized in these languages; in addition, etags | |
7120 recognizes special Objective C syntax for classes, class categories, | |
7121 methods and protocols. | |
7122 | |
7123 *** Etags also handles Cobol. Files are recognised by the extension | |
7124 .cobol. The tagged lines are those containing a word that begins in | |
7125 column 8 and ends in a full stop, i.e. anything that could be a | |
7126 paragraph name. | |
7127 | |
7128 *** Regexps in Etags now support intervals, as in ed or grep. The syntax of | |
7129 an interval is \{M,N\}, and it means to match the preceding expression | |
7130 at least M times and as many as N times. | |
7131 | |
7132 ** The format for specifying a custom format for time-stamp to insert | |
7133 in files has changed slightly. | |
7134 | |
7135 With the new enhancements to the functionality of format-time-string, | |
7136 time-stamp-format will change to be eventually compatible with it. | |
7137 This conversion is being done in two steps to maintain compatibility | |
7138 with old time-stamp-format values. | |
7139 | |
7140 In the new scheme, alternate case is signified by the number-sign | |
7141 (`#') modifier, rather than changing the case of the format character. | |
7142 This feature is as yet incompletely implemented for compatibility | |
7143 reasons. | |
7144 | |
7145 In the old time-stamp-format, all numeric fields defaulted to their | |
7146 natural width. (With format-time-string, each format has a | |
7147 fixed-width default.) In this version, you can specify the colon | |
7148 (`:') modifier to a numeric conversion to mean "give me the historical | |
7149 time-stamp-format width default." Do not use colon if you are | |
7150 specifying an explicit width, as in "%02d". | |
7151 | |
7152 Numbers are no longer truncated to the requested width, except in the | |
7153 case of "%02y", which continues to give a two-digit year. Digit | |
7154 truncation probably wasn't being used for anything else anyway. | |
7155 | |
7156 The new formats will work with old versions of Emacs. New formats are | |
7157 being recommended now to allow time-stamp-format to change in the | |
7158 future to be compatible with format-time-string. The new forms being | |
7159 recommended now will continue to work then. | |
7160 | |
7161 See the documentation string for the variable time-stamp-format for | |
7162 details. | |
7163 | |
7164 ** There are some additional major modes: | |
7165 | |
7166 dcl-mode, for editing VMS DCL files. | |
7167 m4-mode, for editing files of m4 input. | |
7168 meta-mode, for editing MetaFont and MetaPost source files. | |
7169 | |
7170 ** In Shell mode, the command shell-copy-environment-variable lets you | |
7171 copy the value of a specified environment variable from the subshell | |
7172 into Emacs. | |
7173 | |
7174 ** New Lisp packages include: | |
7175 | |
7176 *** battery.el displays battery status for laptops. | |
7177 | |
7178 *** M-x bruce (named after Lenny Bruce) is a program that might | |
7179 be used for adding some indecent words to your email. | |
7180 | |
7181 *** M-x crisp-mode enables an emulation for the CRiSP editor. | |
7182 | |
7183 *** M-x dirtrack arranges for better tracking of directory changes | |
7184 in shell buffers. | |
7185 | |
7186 *** The new library elint.el provides for linting of Emacs Lisp code. | |
7187 See the documentation for `elint-initialize', `elint-current-buffer' | |
7188 and `elint-defun'. | |
7189 | |
7190 *** M-x expand-add-abbrevs defines a special kind of abbrev which is | |
7191 meant for programming constructs. These abbrevs expand like ordinary | |
7192 ones, when you type SPC, but only at the end of a line and not within | |
7193 strings or comments. | |
7194 | |
7195 These abbrevs can act as templates: you can define places within an | |
7196 abbrev for insertion of additional text. Once you expand the abbrev, | |
7197 you can then use C-x a p and C-x a n to move back and forth to these | |
7198 insertion points. Thus you can conveniently insert additional text | |
7199 at these points. | |
7200 | |
7201 *** filecache.el remembers the location of files so that you | |
7202 can visit them by short forms of their names. | |
7203 | |
7204 *** find-func.el lets you find the definition of the user-loaded | |
7205 Emacs Lisp function at point. | |
7206 | |
7207 *** M-x handwrite converts text to a "handwritten" picture. | |
7208 | |
7209 *** M-x iswitchb-buffer is a command for switching to a buffer, much like | |
7210 switch-buffer, but it reads the argument in a more helpful way. | |
7211 | |
7212 *** M-x landmark implements a neural network for landmark learning. | |
7213 | |
7214 *** M-x locate provides a convenient interface to the `locate' program. | |
7215 | |
7216 *** M4 mode is a new mode for editing files of m4 input. | |
7217 | |
7218 *** mantemp.el creates C++ manual template instantiations | |
7219 from the GCC error messages which indicate which instantiations are needed. | |
7220 | |
7221 *** mouse-copy.el provides a one-click copy and move feature. | |
7222 You can drag a region with M-mouse-1, and it is automatically | |
7223 inserted at point. M-Shift-mouse-1 deletes the text from its | |
7224 original place after inserting the copy. | |
7225 | |
7226 *** mouse-drag.el lets you do scrolling by dragging Mouse-2 | |
7227 on the buffer. | |
7228 | |
7229 You click the mouse and move; that distance either translates into the | |
7230 velocity to scroll (with mouse-drag-throw) or the distance to scroll | |
7231 (with mouse-drag-drag). Horizontal scrolling is enabled when needed. | |
7232 | |
7233 Enable mouse-drag with: | |
7234 (global-set-key [down-mouse-2] 'mouse-drag-throw) | |
7235 -or- | |
7236 (global-set-key [down-mouse-2] 'mouse-drag-drag) | |
7237 | |
7238 *** mspools.el is useful for determining which mail folders have | |
7239 mail waiting to be read in them. It works with procmail. | |
7240 | |
7241 *** Octave mode is a major mode for editing files of input for Octave. | |
7242 It comes with a facility for communicating with an Octave subprocess. | |
7243 | |
7244 *** ogonek | |
7245 | |
7246 The ogonek package provides functions for changing the coding of | |
7247 Polish diacritic characters in buffers. Codings known from various | |
7248 platforms are supported such as ISO8859-2, Mazovia, IBM Latin2, and | |
7249 TeX. For example, you can change the coding from Mazovia to | |
7250 ISO8859-2. Another example is a change of coding from ISO8859-2 to | |
7251 prefix notation (in which `/a' stands for the aogonek character, for | |
7252 instance) and vice versa. | |
7253 | |
7254 To use this package load it using | |
7255 M-x load-library [enter] ogonek | |
7256 Then, you may get an explanation by calling one of | |
7257 M-x ogonek-jak -- in Polish | |
7258 M-x ogonek-how -- in English | |
7259 The info specifies the commands and variables provided as well as the | |
7260 ways of customization in `.emacs'. | |
7261 | |
7262 *** Interface to ph. | |
7263 | |
7264 Emacs provides a client interface to CCSO Nameservers (ph/qi) | |
7265 | |
7266 The CCSO nameserver is used in many universities to provide directory | |
7267 services about people. ph.el provides a convenient Emacs interface to | |
7268 these servers. | |
7269 | |
7270 *** uce.el is useful for replying to unsolicited commercial email. | |
7271 | |
7272 *** vcursor.el implements a "virtual cursor" feature. | |
7273 You can move the virtual cursor with special commands | |
7274 while the real cursor does not move. | |
7275 | |
7276 *** webjump.el is a "hot list" package which you can set up | |
7277 for visiting your favorite web sites. | |
7278 | |
7279 *** M-x winner-mode is a minor mode which saves window configurations, | |
7280 so you can move back to other configurations that you have recently used. | |
7281 | |
7282 ** movemail change | |
7283 | |
7284 Movemail no longer needs to be installed setuid root in order for POP | |
7285 mail retrieval to function properly. This is because it no longer | |
7286 supports the RPOP (reserved-port POP) protocol; instead, it uses the | |
7287 user's POP password to authenticate to the mail server. | |
7288 | |
7289 This change was made earlier, but not reported in NEWS before. | |
7290 | |
7291 * Emacs 20.1 changes for MS-DOS and MS-Windows. | |
7292 | |
7293 ** Changes in handling MS-DOS/MS-Windows text files. | |
7294 | |
7295 Emacs handles three different conventions for representing | |
7296 end-of-line: CRLF for MSDOS, LF for Unix and GNU, and CR (used on the | |
7297 Macintosh). Emacs determines which convention is used in a specific | |
7298 file based on the contents of that file (except for certain special | |
7299 file names), and when it saves the file, it uses the same convention. | |
7300 | |
7301 To save the file and change the end-of-line convention, you can use | |
7302 C-x RET f (set-buffer-file-coding-system) to specify a different | |
7303 coding system for the buffer. Then, when you save the file, the newly | |
7304 specified coding system will take effect. For example, to save with | |
7305 LF, specify undecided-unix (or some other ...-unix coding system); to | |
7306 save with CRLF, specify undecided-dos. | |
7307 | |
7308 * Lisp Changes in Emacs 20.1 | |
7309 | |
7310 ** Byte-compiled files made with Emacs 20 will, in general, work in | |
7311 Emacs 19 as well, as long as the source code runs in Emacs 19. And | |
7312 vice versa: byte-compiled files made with Emacs 19 should also run in | |
7313 Emacs 20, as long as the program itself works in Emacs 20. | |
7314 | |
7315 ** Windows-specific functions and variables have been renamed | |
7316 to start with w32- instead of win32-. | |
7317 | |
7318 In hacker language, calling something a "win" is a form of praise. We | |
7319 don't want to praise a non-free Microsoft system, so we don't call it | |
7320 "win". | |
7321 | |
7322 ** Basic Lisp changes | |
7323 | |
7324 *** A symbol whose name starts with a colon now automatically | |
7325 evaluates to itself. Therefore such a symbol can be used as a constant. | |
7326 | |
7327 *** The defined purpose of `defconst' has been changed. It should now | |
7328 be used only for values that should not be changed whether by a program | |
7329 or by the user. | |
7330 | |
7331 The actual behavior of defconst has not been changed. | |
7332 | |
7333 *** There are new macros `when' and `unless' | |
7334 | |
7335 (when CONDITION BODY...) is short for (if CONDITION (progn BODY...)) | |
7336 (unless CONDITION BODY...) is short for (if CONDITION nil BODY...) | |
7337 | |
7338 *** Emacs now defines functions caar, cadr, cdar and cddr with their | |
7339 usual Lisp meanings. For example, caar returns the car of the car of | |
7340 its argument. | |
7341 | |
7342 *** equal, when comparing strings, now ignores their text properties. | |
7343 | |
7344 *** The new function `functionp' tests whether an object is a function. | |
7345 | |
7346 *** arrayp now returns t for char-tables and bool-vectors. | |
7347 | |
7348 *** Certain primitives which use characters (as integers) now get an | |
7349 error if the integer is not a valid character code. These primitives | |
7350 include insert-char, char-to-string, and the %c construct in the | |
7351 `format' function. | |
7352 | |
7353 *** The `require' function now insists on adding a suffix, either .el | |
7354 or .elc, to the file name. Thus, (require 'foo) will not use a file | |
7355 whose name is just foo. It insists on foo.el or foo.elc. | |
7356 | |
7357 *** The `autoload' function, when the file name does not contain | |
7358 either a directory name or the suffix .el or .elc, insists on | |
7359 adding one of these suffixes. | |
7360 | |
7361 *** string-to-number now takes an optional second argument BASE | |
7362 which specifies the base to use when converting an integer. | |
7363 If BASE is omitted, base 10 is used. | |
7364 | |
7365 We have not implemented other radices for floating point numbers, | |
7366 because that would be much more work and does not seem useful. | |
7367 | |
7368 *** substring now handles vectors as well as strings. | |
7369 | |
7370 *** The Common Lisp function eql is no longer defined normally. | |
7371 You must load the `cl' library to define it. | |
7372 | |
7373 *** The new macro `with-current-buffer' lets you evaluate an expression | |
7374 conveniently with a different current buffer. It looks like this: | |
7375 | |
7376 (with-current-buffer BUFFER BODY-FORMS...) | |
7377 | |
7378 BUFFER is the expression that says which buffer to use. | |
7379 BODY-FORMS say what to do in that buffer. | |
7380 | |
7381 *** The new primitive `save-current-buffer' saves and restores the | |
7382 choice of current buffer, like `save-excursion', but without saving or | |
7383 restoring the value of point or the mark. `with-current-buffer' | |
7384 works using `save-current-buffer'. | |
7385 | |
7386 *** The new macro `with-temp-file' lets you do some work in a new buffer and | |
7387 write the output to a specified file. Like `progn', it returns the value | |
7388 of the last form. | |
7389 | |
7390 *** The new macro `with-temp-buffer' lets you do some work in a new buffer, | |
7391 which is discarded after use. Like `progn', it returns the value of the | |
7392 last form. If you wish to return the buffer contents, use (buffer-string) | |
7393 as the last form. | |
7394 | |
7395 *** The new function split-string takes a string, splits it at certain | |
7396 characters, and returns a list of the substrings in between the | |
7397 matches. | |
7398 | |
7399 For example, (split-string "foo bar lose" " +") returns ("foo" "bar" "lose"). | |
7400 | |
7401 *** The new macro with-output-to-string executes some Lisp expressions | |
7402 with standard-output set up so that all output feeds into a string. | |
7403 Then it returns that string. | |
7404 | |
7405 For example, if the current buffer name is `foo', | |
7406 | |
7407 (with-output-to-string | |
7408 (princ "The buffer is ") | |
7409 (princ (buffer-name))) | |
7410 | |
7411 returns "The buffer is foo". | |
7412 | |
7413 ** Non-ASCII characters are now supported, if enable-multibyte-characters | |
7414 is non-nil. | |
7415 | |
7416 These characters have character codes above 256. When inserted in the | |
7417 buffer or stored in a string, they are represented as multibyte | |
7418 characters that occupy several buffer positions each. | |
7419 | |
7420 *** When enable-multibyte-characters is non-nil, a single character in | |
7421 a buffer or string can be two or more bytes (as many as four). | |
7422 | |
7423 Buffers and strings are still made up of unibyte elements; | |
7424 character positions and string indices are always measured in bytes. | |
7425 Therefore, moving forward one character can increase the buffer | |
7426 position by 2, 3 or 4. The function forward-char moves by whole | |
7427 characters, and therefore is no longer equivalent to | |
7428 (lambda (n) (goto-char (+ (point) n))). | |
7429 | |
7430 ASCII characters (codes 0 through 127) are still single bytes, always. | |
7431 Sequences of byte values 128 through 255 are used to represent | |
7432 non-ASCII characters. These sequences are called "multibyte | |
7433 characters". | |
7434 | |
7435 The first byte of a multibyte character is always in the range 128 | |
7436 through 159 (octal 0200 through 0237). These values are called | |
7437 "leading codes". The second and subsequent bytes are always in the | |
7438 range 160 through 255 (octal 0240 through 0377). The first byte, the | |
7439 leading code, determines how many bytes long the sequence is. | |
7440 | |
7441 *** The function forward-char moves over characters, and therefore | |
7442 (forward-char 1) may increase point by more than 1 if it moves over a | |
7443 multibyte character. Likewise, delete-char always deletes a | |
7444 character, which may be more than one buffer position. | |
7445 | |
7446 This means that some Lisp programs, which assume that a character is | |
7447 always one buffer position, need to be changed. | |
7448 | |
7449 However, all ASCII characters are always one buffer position. | |
7450 | |
7451 *** The regexp [\200-\377] no longer matches all non-ASCII characters, | |
7452 because when enable-multibyte-characters is non-nil, these characters | |
7453 have codes that are not in the range octal 200 to octal 377. However, | |
7454 the regexp [^\000-\177] does match all non-ASCII characters, | |
7455 guaranteed. | |
7456 | |
7457 *** The function char-boundary-p returns non-nil if position POS is | |
7458 between two characters in the buffer (not in the middle of a | |
7459 character). | |
7460 | |
7461 When the value is non-nil, it says what kind of character follows POS: | |
7462 | |
7463 0 if POS is at an ASCII character or at the end of range, | |
7464 1 if POS is before a 2-byte length multi-byte form, | |
7465 2 if POS is at a head of 3-byte length multi-byte form, | |
7466 3 if POS is at a head of 4-byte length multi-byte form, | |
7467 4 if POS is at a head of multi-byte form of a composite character. | |
7468 | |
7469 *** The function char-bytes returns how many bytes the character CHAR uses. | |
7470 | |
7471 *** Strings can contain multibyte characters. The function | |
7472 `length' returns the string length counting bytes, which may be | |
7473 more than the number of characters. | |
7474 | |
7475 You can include a multibyte character in a string constant by writing | |
7476 it literally. You can also represent it with a hex escape, | |
7477 \xNNNNNNN..., using as many digits as necessary. Any character which | |
7478 is not a valid hex digit terminates this construct. If you want to | |
7479 follow it with a character that is a hex digit, write backslash and | |
7480 newline in between; that will terminate the hex escape. | |
7481 | |
7482 *** The function concat-chars takes arguments which are characters | |
7483 and returns a string containing those characters. | |
7484 | |
7485 *** The function sref access a multibyte character in a string. | |
7486 (sref STRING INDX) returns the character in STRING at INDEX. INDEX | |
7487 counts from zero. If INDEX is at a position in the middle of a | |
7488 character, sref signals an error. | |
7489 | |
7490 *** The function chars-in-string returns the number of characters | |
7491 in a string. This is less than the length of the string, if the | |
7492 string contains multibyte characters (the length counts bytes). | |
7493 | |
7494 *** The function chars-in-region returns the number of characters | |
7495 in a region from BEG to END. This is less than (- END BEG) if the | |
7496 region contains multibyte characters (the length counts bytes). | |
7497 | |
7498 *** The function string-to-list converts a string to a list of | |
7499 the characters in it. string-to-vector converts a string | |
7500 to a vector of the characters in it. | |
7501 | |
7502 *** The function store-substring alters part of the contents | |
7503 of a string. You call it as follows: | |
7504 | |
7505 (store-substring STRING IDX OBJ) | |
7506 | |
7507 This says to alter STRING, by storing OBJ starting at index IDX in | |
7508 STRING. OBJ may be either a character or a (smaller) string. | |
7509 This function really does alter the contents of STRING. | |
7510 Since it is impossible to change the length of an existing string, | |
7511 it is an error if OBJ doesn't fit within STRING's actual length. | |
7512 | |
7513 *** char-width returns the width (in columns) of the character CHAR, | |
7514 if it were displayed in the current buffer and the selected window. | |
7515 | |
7516 *** string-width returns the width (in columns) of the text in STRING, | |
7517 if it were displayed in the current buffer and the selected window. | |
7518 | |
7519 *** truncate-string-to-width shortens a string, if necessary, | |
7520 to fit within a certain number of columns. (Of course, it does | |
7521 not alter the string that you give it; it returns a new string | |
7522 which contains all or just part of the existing string.) | |
7523 | |
7524 (truncate-string-to-width STR END-COLUMN &optional START-COLUMN PADDING) | |
7525 | |
7526 This returns the part of STR up to column END-COLUMN. | |
7527 | |
7528 The optional argument START-COLUMN specifies the starting column. | |
7529 If this is non-nil, then the first START-COLUMN columns of the string | |
7530 are not included in the resulting value. | |
7531 | |
7532 The optional argument PADDING, if non-nil, is a padding character to be added | |
7533 at the beginning and end the resulting string, to extend it to exactly | |
7534 WIDTH columns. If PADDING is nil, that means do not pad; then, if STRING | |
7535 is narrower than WIDTH, the value is equal to STRING. | |
7536 | |
7537 If PADDING and START-COLUMN are both non-nil, and if there is no clean | |
7538 place in STRING that corresponds to START-COLUMN (because one | |
7539 character extends across that column), then the padding character | |
7540 PADDING is added one or more times at the beginning of the result | |
7541 string, so that its columns line up as if it really did start at | |
7542 column START-COLUMN. | |
7543 | |
7544 *** When the functions in the list after-change-functions are called, | |
7545 the third argument is the number of bytes in the pre-change text, not | |
7546 necessarily the number of characters. It is, in effect, the | |
7547 difference in buffer position between the beginning and the end of the | |
7548 changed text, before the change. | |
7549 | |
7550 *** The characters Emacs uses are classified in various character | |
7551 sets, each of which has a name which is a symbol. In general there is | |
7552 one character set for each script, not for each language. | |
7553 | |
7554 **** The function charsetp tests whether an object is a character set name. | |
7555 | |
7556 **** The variable charset-list holds a list of character set names. | |
7557 | |
7558 **** char-charset, given a character code, returns the name of the character | |
7559 set that the character belongs to. (The value is a symbol.) | |
7560 | |
7561 **** split-char, given a character code, returns a list containing the | |
7562 name of the character set, followed by one or two byte-values | |
7563 which identify the character within that character set. | |
7564 | |
7565 **** make-char, given a character set name and one or two subsequent | |
7566 byte-values, constructs a character code. This is roughly the | |
7567 opposite of split-char. | |
7568 | |
7569 **** find-charset-region returns a list of the character sets | |
7570 of all the characters between BEG and END. | |
7571 | |
7572 **** find-charset-string returns a list of the character sets | |
7573 of all the characters in a string. | |
7574 | |
7575 *** Here are the Lisp facilities for working with coding systems | |
7576 and specifying coding systems. | |
7577 | |
7578 **** The function coding-system-list returns a list of all coding | |
7579 system names (symbols). With optional argument t, it returns a list | |
7580 of all distinct base coding systems, not including variants. | |
7581 (Variant coding systems are those like latin-1-dos, latin-1-unix | |
7582 and latin-1-mac which specify the end-of-line conversion as well | |
7583 as what to do about code conversion.) | |
7584 | |
7585 **** coding-system-p tests a symbol to see if it is a coding system | |
7586 name. It returns t if so, nil if not. | |
7587 | |
7588 **** file-coding-system-alist specifies which coding systems to use | |
7589 for certain file names. It works like network-coding-system-alist, | |
7590 except that the PATTERN is matched against the file name. | |
7591 | |
7592 Each element has the format (PATTERN . VAL), where PATTERN determines | |
7593 which file names the element applies to. PATTERN should be a regexp | |
7594 to match against a file name. | |
7595 | |
7596 VAL is a coding system, a cons cell containing two coding systems, or | |
7597 a function symbol. If VAL is a coding system, it is used for both | |
7598 decoding what received from the network stream and encoding what sent | |
7599 to the network stream. If VAL is a cons cell containing two coding | |
7600 systems, the car specifies the coding system for decoding, and the cdr | |
7601 specifies the coding system for encoding. | |
7602 | |
7603 If VAL is a function symbol, the function must return a coding system | |
7604 or a cons cell containing two coding systems, which is used as above. | |
7605 | |
7606 **** The variable network-coding-system-alist specifies | |
7607 the coding system to use for network sockets. | |
7608 | |
7609 Each element has the format (PATTERN . VAL), where PATTERN determines | |
7610 which network sockets the element applies to. PATTERN should be | |
7611 either a port number or a regular expression matching some network | |
7612 service names. | |
7613 | |
7614 VAL is a coding system, a cons cell containing two coding systems, or | |
7615 a function symbol. If VAL is a coding system, it is used for both | |
7616 decoding what received from the network stream and encoding what sent | |
7617 to the network stream. If VAL is a cons cell containing two coding | |
7618 systems, the car specifies the coding system for decoding, and the cdr | |
7619 specifies the coding system for encoding. | |
7620 | |
7621 If VAL is a function symbol, the function must return a coding system | |
7622 or a cons cell containing two coding systems, which is used as above. | |
7623 | |
7624 **** process-coding-system-alist specifies which coding systems to use | |
7625 for certain subprocess. It works like network-coding-system-alist, | |
7626 except that the PATTERN is matched against the program name used to | |
7627 start the subprocess. | |
7628 | |
7629 **** The variable default-process-coding-system specifies the coding | |
7630 systems to use for subprocess (and net connection) input and output, | |
7631 when nothing else specifies what to do. The value is a cons cell | |
7632 (OUTPUT-CODING . INPUT-CODING). OUTPUT-CODING applies to output | |
7633 to the subprocess, and INPUT-CODING applies to input from it. | |
7634 | |
7635 **** The variable coding-system-for-write, if non-nil, specifies the | |
7636 coding system to use for writing a file, or for output to a synchronous | |
7637 subprocess. | |
7638 | |
7639 It also applies to any asynchronous subprocess or network connection, | |
7640 but in a different way: the value of coding-system-for-write when you | |
7641 start the subprocess or connection affects that subprocess or | |
7642 connection permanently or until overridden. | |
7643 | |
7644 The variable coding-system-for-write takes precedence over | |
7645 file-coding-system-alist, process-coding-system-alist and | |
7646 network-coding-system-alist, and all other methods of specifying a | |
7647 coding system for output. But most of the time this variable is nil. | |
7648 It exists so that Lisp programs can bind it to a specific coding | |
7649 system for one operation at a time. | |
7650 | |
7651 **** coding-system-for-read applies similarly to input from | |
7652 files, subprocesses or network connections. | |
7653 | |
7654 **** The function process-coding-system tells you what | |
7655 coding systems(s) an existing subprocess is using. | |
7656 The value is a cons cell, | |
7657 (DECODING-CODING-SYSTEM . ENCODING-CODING-SYSTEM) | |
7658 where DECODING-CODING-SYSTEM is used for decoding output from | |
7659 the subprocess, and ENCODING-CODING-SYSTEM is used for encoding | |
7660 input to the subprocess. | |
7661 | |
7662 **** The function set-process-coding-system can be used to | |
7663 change the coding systems in use for an existing subprocess. | |
7664 | |
7665 ** Emacs has a new facility to help users manage the many | |
7666 customization options. To make a Lisp program work with this facility, | |
7667 you need to use the new macros defgroup and defcustom. | |
7668 | |
7669 You use defcustom instead of defvar, for defining a user option | |
7670 variable. The difference is that you specify two additional pieces of | |
7671 information (usually): the "type" which says what values are | |
7672 legitimate, and the "group" which specifies the hierarchy for | |
7673 customization. | |
7674 | |
7675 Thus, instead of writing | |
7676 | |
7677 (defvar foo-blurgoze nil | |
7678 "*Non-nil means that foo will act very blurgozely.") | |
7679 | |
7680 you would now write this: | |
7681 | |
7682 (defcustom foo-blurgoze nil | |
7683 "*Non-nil means that foo will act very blurgozely." | |
7684 :type 'boolean | |
7685 :group foo) | |
7686 | |
7687 The type `boolean' means that this variable has only | |
7688 two meaningful states: nil and non-nil. Other type values | |
7689 describe other possibilities; see the manual for Custom | |
7690 for a description of them. | |
7691 | |
7692 The "group" argument is used to specify a group which the option | |
7693 should belong to. You define a new group like this: | |
7694 | |
7695 (defgroup ispell nil | |
7696 "Spell checking using Ispell." | |
7697 :group 'processes) | |
7698 | |
7699 The "group" argument in defgroup specifies the parent group. The root | |
7700 group is called `emacs'; it should not contain any variables itself, | |
7701 but only other groups. The immediate subgroups of `emacs' correspond | |
7702 to the keywords used by C-h p. Under these subgroups come | |
7703 second-level subgroups that belong to individual packages. | |
7704 | |
7705 Each Emacs package should have its own set of groups. A simple | |
7706 package should have just one group; a more complex package should | |
7707 have a hierarchy of its own groups. The sole or root group of a | |
7708 package should be a subgroup of one or more of the "keyword" | |
7709 first-level subgroups. | |
7710 | |
7711 ** New `widget' library for inserting UI components in buffers. | |
7712 | |
7713 This library, used by the new custom library, is documented in a | |
7714 separate manual that accompanies Emacs. | |
7715 | |
7716 ** easy-mmode | |
7717 | |
7718 The easy-mmode package provides macros and functions that make | |
7719 developing minor modes easier. Roughly, the programmer has to code | |
7720 only the functionality of the minor mode. All the rest--toggles, | |
7721 predicate, and documentation--can be done in one call to the macro | |
7722 `easy-mmode-define-minor-mode' (see the documentation). See also | |
7723 `easy-mmode-define-keymap'. | |
7724 | |
7725 ** Text property changes | |
7726 | |
7727 *** The `intangible' property now works on overlays as well as on a | |
7728 text property. | |
7729 | |
7730 *** The new functions next-char-property-change and | |
7731 previous-char-property-change scan through the buffer looking for a | |
7732 place where either a text property or an overlay might change. The | |
7733 functions take two arguments, POSITION and LIMIT. POSITION is the | |
7734 starting position for the scan. LIMIT says where to stop the scan. | |
7735 | |
7736 If no property change is found before LIMIT, the value is LIMIT. If | |
7737 LIMIT is nil, scan goes to the beginning or end of the accessible part | |
7738 of the buffer. If no property change is found, the value is the | |
7739 position of the beginning or end of the buffer. | |
7740 | |
7741 *** In the `local-map' text property or overlay property, the property | |
7742 value can now be a symbol whose function definition is a keymap. This | |
7743 is an alternative to using the keymap itself. | |
7744 | |
7745 ** Changes in invisibility features | |
7746 | |
7747 *** Isearch can now temporarily show parts of the buffer which are | |
7748 hidden by an overlay with a invisible property, when the search match | |
7749 is inside that portion of the buffer. To enable this the overlay | |
7750 should have a isearch-open-invisible property which is a function that | |
7751 would be called having the overlay as an argument, the function should | |
7752 make the overlay visible. | |
7753 | |
7754 During incremental search the overlays are shown by modifying the | |
7755 invisible and intangible properties, if beside this more actions are | |
7756 needed the overlay should have a isearch-open-invisible-temporary | |
7757 which is a function. The function is called with 2 arguments: one is | |
7758 the overlay and the second is nil when it should show the overlay and | |
7759 t when it should hide it. | |
7760 | |
7761 *** add-to-invisibility-spec, remove-from-invisibility-spec | |
7762 | |
7763 Modes that use overlays to hide portions of a buffer should set the | |
7764 invisible property of the overlay to the mode's name (or another symbol) | |
7765 and modify the `buffer-invisibility-spec' to include that symbol. | |
7766 Use `add-to-invisibility-spec' and `remove-from-invisibility-spec' to | |
7767 manipulate the `buffer-invisibility-spec'. | |
7768 Here is an example of how to do this: | |
7769 | |
7770 ;; If we want to display an ellipsis: | |
7771 (add-to-invisibility-spec '(my-symbol . t)) | |
7772 ;; If you don't want ellipsis: | |
7773 (add-to-invisibility-spec 'my-symbol) | |
7774 | |
7775 ... | |
7776 (overlay-put (make-overlay beginning end) 'invisible 'my-symbol) | |
7777 | |
7778 ... | |
7779 ;; When done with the overlays: | |
7780 (remove-from-invisibility-spec '(my-symbol . t)) | |
7781 ;; Or respectively: | |
7782 (remove-from-invisibility-spec 'my-symbol) | |
7783 | |
7784 ** Changes in syntax parsing. | |
7785 | |
7786 *** The syntax-directed buffer-scan functions (such as | |
7787 `parse-partial-sexp', `forward-word' and similar functions) can now | |
7788 obey syntax information specified by text properties, if the variable | |
7789 `parse-sexp-lookup-properties' is non-nil. | |
7790 | |
7791 If the value of `parse-sexp-lookup-properties' is nil, the behavior | |
7792 is as before: the syntax-table of the current buffer is always | |
7793 used to determine the syntax of the character at the position. | |
7794 | |
7795 When `parse-sexp-lookup-properties' is non-nil, the syntax of a | |
7796 character in the buffer is calculated thus: | |
7797 | |
7798 a) if the `syntax-table' text-property of that character | |
7799 is a cons, this cons becomes the syntax-type; | |
7800 | |
7801 Valid values of `syntax-table' text-property are: nil, a valid | |
7802 syntax-table, and a valid syntax-table element, i.e., | |
7803 a cons cell of the form (SYNTAX-CODE . MATCHING-CHAR). | |
7804 | |
7805 b) if the character's `syntax-table' text-property | |
7806 is a syntax table, this syntax table is used | |
7807 (instead of the syntax-table of the current buffer) to | |
7808 determine the syntax type of the character. | |
7809 | |
7810 c) otherwise the syntax-type is determined by the syntax-table | |
7811 of the current buffer. | |
7812 | |
7813 *** The meaning of \s in regular expressions is also affected by the | |
7814 value of `parse-sexp-lookup-properties'. The details are the same as | |
7815 for the syntax-directed buffer-scan functions. | |
7816 | |
7817 *** There are two new syntax-codes, `!' and `|' (numeric values 14 | |
7818 and 15). A character with a code `!' starts a comment which is ended | |
7819 only by another character with the same code (unless quoted). A | |
7820 character with a code `|' starts a string which is ended only by | |
7821 another character with the same code (unless quoted). | |
7822 | |
7823 These codes are mainly meant for use as values of the `syntax-table' | |
7824 text property. | |
7825 | |
7826 *** The function `parse-partial-sexp' has new semantics for the sixth | |
7827 arg COMMENTSTOP. If it is `syntax-table', parse stops after the start | |
7828 of a comment or a string, or after end of a comment or a string. | |
7829 | |
7830 *** The state-list which the return value from `parse-partial-sexp' | |
7831 (and can also be used as an argument) now has an optional ninth | |
7832 element: the character address of the start of last comment or string; | |
7833 nil if none. The fourth and eighth elements have special values if the | |
7834 string/comment is started by a "!" or "|" syntax-code. | |
7835 | |
7836 *** Since new features of `parse-partial-sexp' allow a complete | |
7837 syntactic parsing, `font-lock' no longer supports | |
7838 `font-lock-comment-start-regexp'. | |
7839 | |
7840 ** Changes in face features | |
7841 | |
7842 *** The face functions are now unconditionally defined in Emacs, even | |
7843 if it does not support displaying on a device that supports faces. | |
7844 | |
7845 *** The function face-documentation returns the documentation string | |
7846 of a face (or nil if it doesn't have one). | |
7847 | |
7848 *** The function face-bold-p returns t if a face should be bold. | |
7849 set-face-bold-p sets that flag. | |
7850 | |
7851 *** The function face-italic-p returns t if a face should be italic. | |
7852 set-face-italic-p sets that flag. | |
7853 | |
7854 *** You can now specify foreground and background colors for text | |
7855 by adding elements of the form (foreground-color . COLOR-NAME) | |
7856 and (background-color . COLOR-NAME) to the list of faces in | |
7857 the `face' property (either the character's text property or an | |
7858 overlay property). | |
7859 | |
7860 This means that you no longer need to create named faces to use | |
7861 arbitrary colors in a Lisp package. | |
7862 | |
7863 ** Changes in file-handling functions | |
7864 | |
7865 *** File-access primitive functions no longer discard an extra redundant | |
7866 directory name from the beginning of the file name. In other words, | |
7867 they no longer do anything special with // or /~. That conversion | |
7868 is now done only in substitute-in-file-name. | |
7869 | |
7870 This makes it possible for a Lisp program to open a file whose name | |
7871 begins with ~. | |
7872 | |
7873 *** If copy-file is unable to set the date of the output file, | |
7874 it now signals an error with the condition file-date-error. | |
7875 | |
7876 *** The inode number returned by file-attributes may be an integer (if | |
7877 the number fits in a Lisp integer) or a list of integers. | |
7878 | |
7879 *** insert-file-contents can now read from a special file, | |
7880 as long as the arguments VISIT and REPLACE are nil. | |
7881 | |
7882 *** The RAWFILE arg to find-file-noselect, if non-nil, now suppresses | |
7883 character code conversion as well as other things. | |
7884 | |
7885 Meanwhile, this feature does work with remote file names | |
7886 (formerly it did not). | |
7887 | |
7888 *** Lisp packages which create temporary files should use the TMPDIR | |
7889 environment variable to decide which directory to put them in. | |
7890 | |
7891 *** interpreter-mode-alist elements now specify regexps | |
7892 instead of constant strings. | |
7893 | |
7894 *** expand-file-name no longer treats `//' or `/~' specially. It used | |
7895 to delete all the text of a file name up through the first slash of | |
7896 any `//' or `/~' sequence. Now it passes them straight through. | |
7897 | |
7898 substitute-in-file-name continues to treat those sequences specially, | |
7899 in the same way as before. | |
7900 | |
7901 *** The variable `format-alist' is more general now. | |
7902 The FROM-FN and TO-FN in a format definition can now be strings | |
7903 which specify shell commands to use as filters to perform conversion. | |
7904 | |
7905 *** The new function access-file tries to open a file, and signals an | |
7906 error if that fails. If the open succeeds, access-file does nothing | |
7907 else, and returns nil. | |
7908 | |
7909 *** The function insert-directory now signals an error if the specified | |
7910 directory cannot be listed. | |
7911 | |
7912 ** Changes in minibuffer input | |
7913 | |
7914 *** The functions read-buffer, read-variable, read-command, read-string | |
7915 read-file-name, read-from-minibuffer and completing-read now take an | |
7916 additional argument which specifies the default value. If this | |
7917 argument is non-nil, it should be a string; that string is used in two | |
7918 ways: | |
7919 | |
7920 It is returned if the user enters empty input. | |
7921 It is available through the history command M-n. | |
7922 | |
7923 *** The functions read-string, read-from-minibuffer, | |
7924 read-no-blanks-input and completing-read now take an additional | |
7925 argument INHERIT-INPUT-METHOD. If this is non-nil, then the | |
7926 minibuffer inherits the current input method and the setting of | |
7927 enable-multibyte-characters from the previously current buffer. | |
7928 | |
7929 In an interactive spec, you can use M instead of s to read an | |
7930 argument in this way. | |
7931 | |
7932 *** All minibuffer input functions discard text properties | |
7933 from the text you enter in the minibuffer, unless the variable | |
7934 minibuffer-allow-text-properties is non-nil. | |
7935 | |
7936 ** Echo area features | |
7937 | |
7938 *** Clearing the echo area now runs the normal hook | |
7939 echo-area-clear-hook. Note that the echo area can be used while the | |
7940 minibuffer is active; in that case, the minibuffer is still active | |
7941 after the echo area is cleared. | |
7942 | |
7943 *** The function current-message returns the message currently displayed | |
7944 in the echo area, or nil if there is none. | |
7945 | |
7946 ** Keyboard input features | |
7947 | |
7948 *** tty-erase-char is a new variable that reports which character was | |
7949 set up as the terminal's erase character when time Emacs was started. | |
7950 | |
7951 *** num-nonmacro-input-events is the total number of input events | |
7952 received so far from the terminal. It does not count those generated | |
7953 by keyboard macros. | |
7954 | |
7955 ** Frame-related changes | |
7956 | |
7957 *** make-frame runs the normal hook before-make-frame-hook just before | |
7958 creating a frame, and just after creating a frame it runs the abnormal | |
7959 hook after-make-frame-functions with the new frame as arg. | |
7960 | |
7961 *** The new hook window-configuration-change-hook is now run every time | |
7962 the window configuration has changed. The frame whose configuration | |
7963 has changed is the selected frame when the hook is run. | |
7964 | |
7965 *** Each frame now independently records the order for recently | |
7966 selected buffers, in its buffer-list frame parameter, so that the | |
7967 value of other-buffer is now based on the buffers recently displayed | |
7968 in the selected frame. | |
7969 | |
7970 *** The value of the frame parameter vertical-scroll-bars | |
7971 is now `left', `right' or nil. A non-nil value specifies | |
7972 which side of the window to put the scroll bars on. | |
7973 | |
7974 ** X Windows features | |
7975 | |
7976 *** You can examine X resources for other applications by binding | |
7977 x-resource-class around a call to x-get-resource. The usual value of | |
7978 x-resource-class is "Emacs", which is the correct value for Emacs. | |
7979 | |
7980 *** In menus, checkboxes and radio buttons now actually work. | |
7981 The menu displays the current status of the box or button. | |
7982 | |
7983 *** The function x-list-fonts now takes an optional fourth argument | |
7984 MAXIMUM which sets a limit on how many matching fonts to return. | |
7985 A smaller value of MAXIMUM makes the function faster. | |
7986 | |
7987 If the only question is whether *any* font matches the pattern, | |
7988 it is good to supply 1 for this argument. | |
7989 | |
7990 ** Subprocess features | |
7991 | |
7992 *** A reminder: it is no longer necessary for subprocess filter | |
7993 functions and sentinels to do save-match-data, because Emacs does this | |
7994 automatically. | |
7995 | |
7996 *** The new function shell-command-to-string executes a shell command | |
7997 and returns the output from the command as a string. | |
7998 | |
7999 *** The new function process-contact returns t for a child process, | |
8000 and (HOSTNAME SERVICE) for a net connection. | |
8001 | |
8002 ** An error in running pre-command-hook or post-command-hook | |
8003 does clear the variable to nil. The documentation was wrong before. | |
8004 | |
8005 ** In define-key-after, if AFTER is t, the new binding now always goes | |
8006 at the end of the keymap. If the keymap is a menu, this means it | |
8007 goes after the other menu items. | |
8008 | |
8009 ** If you have a program that makes several changes in the same area | |
8010 of the buffer, you can use the macro combine-after-change-calls | |
8011 around that Lisp code to make it faster when after-change hooks | |
8012 are in use. | |
8013 | |
8014 The macro arranges to call the after-change functions just once for a | |
8015 series of several changes--if that seems safe. | |
8016 | |
8017 Don't alter the variables after-change-functions and | |
8018 after-change-function within the body of a combine-after-change-calls | |
8019 form. | |
8020 | |
8021 ** If you define an abbrev (with define-abbrev) whose EXPANSION | |
8022 is not a string, then the abbrev does not expand in the usual sense, | |
8023 but its hook is still run. | |
8024 | |
8025 ** Normally, the Lisp debugger is not used (even if you have enabled it) | |
8026 for errors that are handled by condition-case. | |
8027 | |
8028 If you set debug-on-signal to a non-nil value, then the debugger is called | |
8029 regardless of whether there is a handler for the condition. This is | |
8030 useful for debugging problems that happen inside of a condition-case. | |
8031 | |
8032 This mode of operation seems to be unreliable in other ways. Errors that | |
8033 are normal and ought to be handled, perhaps in timers or process | |
8034 filters, will instead invoke the debugger. So don't say you weren't | |
8035 warned. | |
8036 | |
8037 ** The new variable ring-bell-function lets you specify your own | |
8038 way for Emacs to "ring the bell". | |
8039 | |
8040 ** If run-at-time's TIME argument is t, the action is repeated at | |
8041 integral multiples of REPEAT from the epoch; this is useful for | |
8042 functions like display-time. | |
8043 | |
8044 ** You can use the function locate-library to find the precise file | |
8045 name of a Lisp library. This isn't new, but wasn't documented before. | |
8046 | |
8047 ** Commands for entering view mode have new optional arguments that | |
8048 can be used from Lisp. Low-level entrance to and exit from view mode | |
8049 is done by functions view-mode-enter and view-mode-exit. | |
8050 | |
8051 ** batch-byte-compile-file now makes Emacs return a nonzero status code | |
8052 if there is an error in compilation. | |
8053 | |
8054 ** pop-to-buffer, switch-to-buffer-other-window and | |
8055 switch-to-buffer-other-frame now accept an additional optional | |
8056 argument NORECORD, much like switch-to-buffer. If it is non-nil, | |
8057 they don't put the buffer at the front of the buffer list. | |
8058 | |
8059 ** If your .emacs file leaves the *scratch* buffer non-empty, | |
8060 Emacs does not display the startup message, so as to avoid changing | |
8061 the *scratch* buffer. | |
8062 | |
8063 ** The new function regexp-opt returns an efficient regexp to match a string. | |
8064 The arguments are STRINGS and (optionally) PAREN. This function can be used | |
8065 where regexp matching or searching is intensively used and speed is important, | |
8066 e.g., in Font Lock mode. | |
8067 | |
8068 ** The variable buffer-display-count is local to each buffer, | |
8069 and is incremented each time the buffer is displayed in a window. | |
8070 It starts at 0 when the buffer is created. | |
8071 | |
8072 ** The new function compose-mail starts composing a mail message | |
8073 using the user's chosen mail composition agent (specified with the | |
8074 variable mail-user-agent). It has variants compose-mail-other-window | |
8075 and compose-mail-other-frame. | |
8076 | |
8077 ** The `user-full-name' function now takes an optional parameter which | |
8078 can either be a number (the UID) or a string (the login name). The | |
8079 full name of the specified user will be returned. | |
8080 | |
8081 ** Lisp packages that load files of customizations, or any other sort | |
8082 of user profile, should obey the variable init-file-user in deciding | |
8083 where to find it. They should load the profile of the user name found | |
8084 in that variable. If init-file-user is nil, meaning that the -q | |
8085 option was used, then Lisp packages should not load the customization | |
8086 files at all. | |
8087 | |
8088 ** format-time-string now allows you to specify the field width | |
8089 and type of padding. This works as in printf: you write the field | |
8090 width as digits in the middle of a %-construct. If you start | |
8091 the field width with 0, it means to pad with zeros. | |
8092 | |
8093 For example, %S normally specifies the number of seconds since the | |
8094 minute; %03S means to pad this with zeros to 3 positions, %_3S to pad | |
8095 with spaces to 3 positions. Plain %3S pads with zeros, because that | |
8096 is how %S normally pads to two positions. | |
8097 | |
8098 ** thing-at-point now supports a new kind of "thing": url. | |
8099 | |
8100 ** imenu.el changes. | |
8101 | |
8102 You can now specify a function to be run when selecting an | |
8103 item from menu created by imenu. | |
8104 | |
8105 An example of using this feature: if we define imenu items for the | |
8106 #include directives in a C file, we can open the included file when we | |
8107 select one of those items. | |
8108 | |
8109 * Emacs 19.34 is a bug-fix release with no user-visible changes. | |
8110 | |
8111 * Changes in Emacs 19.33. | |
8112 | |
8113 ** Bibtex mode no longer turns on Auto Fill automatically. (No major | |
8114 mode should do that--it is the user's choice.) | |
8115 | |
8116 ** The variable normal-auto-fill-function specifies the function to | |
8117 use for auto-fill-function, if and when Auto Fill is turned on. | |
8118 Major modes can set this locally to alter how Auto Fill works. | |
8119 | |
8120 * Editing Changes in Emacs 19.32 | |
8121 | |
8122 ** C-x f with no argument now signals an error. | |
8123 To set the fill column at the current column, use C-u C-x f. | |
8124 | |
8125 ** Expanding dynamic abbrevs with M-/ is now smarter about case | |
8126 conversion. If you type the abbreviation with mixed case, and it | |
8127 matches the beginning of the expansion including case, then the | |
8128 expansion is copied verbatim. Using SPC M-/ to copy an additional | |
8129 word always copies it verbatim except when the previous copied word is | |
8130 all caps. | |
8131 | |
8132 ** On a non-windowing terminal, which can display only one Emacs frame | |
8133 at a time, creating a new frame with C-x 5 2 also selects that frame. | |
8134 | |
8135 When using a display that can show multiple frames at once, C-x 5 2 | |
8136 does make the frame visible, but does not select it. This is the same | |
8137 as in previous Emacs versions. | |
8138 | |
8139 ** You can use C-x 5 2 to create multiple frames on MSDOS, just as on a | |
8140 non-X terminal on Unix. Of course, only one frame is visible at any | |
8141 time, since your terminal doesn't have the ability to display multiple | |
8142 frames. | |
8143 | |
8144 ** On Windows, set win32-pass-alt-to-system to a non-nil value | |
8145 if you would like tapping the Alt key to invoke the Windows menu. | |
8146 This feature is not enabled by default; since the Alt key is also the | |
8147 Meta key, it is too easy and painful to activate this feature by | |
8148 accident. | |
8149 | |
8150 ** The command apply-macro-to-region-lines repeats the last defined | |
8151 keyboard macro once for each complete line within the current region. | |
8152 It does this line by line, by moving point to the beginning of that | |
8153 line and then executing the macro. | |
8154 | |
8155 This command is not new, but was never documented before. | |
8156 | |
8157 ** You can now use Mouse-1 to place the region around a string constant | |
8158 (something surrounded by doublequote characters or other delimiter | |
8159 characters of like syntax) by double-clicking on one of the delimiting | |
8160 characters. | |
8161 | |
8162 ** Font Lock mode | |
8163 | |
8164 *** Font Lock support modes | |
8165 | |
8166 Font Lock can be configured to use Fast Lock mode and Lazy Lock mode (see | |
8167 below) in a flexible way. Rather than adding the appropriate function to the | |
8168 hook font-lock-mode-hook, you can use the new variable font-lock-support-mode | |
8169 to control which modes have Fast Lock mode or Lazy Lock mode turned on when | |
8170 Font Lock mode is enabled. | |
8171 | |
8172 For example, to use Fast Lock mode when Font Lock mode is turned on, put: | |
8173 | |
8174 (setq font-lock-support-mode 'fast-lock-mode) | |
8175 | |
8176 in your ~/.emacs. | |
8177 | |
8178 *** lazy-lock | |
8179 | |
8180 The lazy-lock package speeds up Font Lock mode by making fontification occur | |
8181 only when necessary, such as when a previously unfontified part of the buffer | |
8182 becomes visible in a window. When you create a buffer with Font Lock mode and | |
8183 Lazy Lock mode turned on, the buffer is not fontified. When certain events | |
8184 occur (such as scrolling), Lazy Lock makes sure that the visible parts of the | |
8185 buffer are fontified. Lazy Lock also defers on-the-fly fontification until | |
8186 Emacs has been idle for a given amount of time. | |
8187 | |
8188 To use this package, put in your ~/.emacs: | |
8189 | |
8190 (setq font-lock-support-mode 'lazy-lock-mode) | |
8191 | |
8192 To control the package behaviour, see the documentation for `lazy-lock-mode'. | |
8193 | |
8194 ** Changes in BibTeX mode. | |
8195 | |
8196 *** For all entries allow spaces and tabs between opening brace or | |
8197 paren and key. | |
8198 | |
8199 *** Non-escaped double-quoted characters (as in `Sch"of') are now | |
8200 supported. | |
8201 | |
8202 ** Gnus changes. | |
8203 | |
8204 Gnus, the Emacs news reader, has undergone further rewriting. Many new | |
8205 commands and variables have been added. There should be no | |
8206 significant incompatibilities between this Gnus version and the | |
8207 previously released version, except in the message composition area. | |
8208 | |
8209 Below is a list of the more user-visible changes. Coding changes | |
8210 between Gnus 5.1 and 5.2 are more extensive. | |
8211 | |
8212 *** A new message composition mode is used. All old customization | |
8213 variables for mail-mode, rnews-reply-mode and gnus-msg are now | |
8214 obsolete. | |
8215 | |
8216 *** Gnus is now able to generate "sparse" threads -- threads where | |
8217 missing articles are represented by empty nodes. | |
8218 | |
8219 (setq gnus-build-sparse-threads 'some) | |
8220 | |
8221 *** Outgoing articles are stored on a special archive server. | |
8222 | |
8223 To disable this: (setq gnus-message-archive-group nil) | |
8224 | |
8225 *** Partial thread regeneration now happens when articles are | |
8226 referred. | |
8227 | |
8228 *** Gnus can make use of GroupLens predictions: | |
8229 | |
8230 (setq gnus-use-grouplens t) | |
8231 | |
8232 *** A trn-line tree buffer can be displayed. | |
8233 | |
8234 (setq gnus-use-trees t) | |
8235 | |
8236 *** An nn-like pick-and-read minor mode is available for the summary | |
8237 buffers. | |
8238 | |
8239 (add-hook 'gnus-summary-mode-hook 'gnus-pick-mode) | |
8240 | |
8241 *** In binary groups you can use a special binary minor mode: | |
8242 | |
8243 `M-x gnus-binary-mode' | |
8244 | |
8245 *** Groups can be grouped in a folding topic hierarchy. | |
8246 | |
8247 (add-hook 'gnus-group-mode-hook 'gnus-topic-mode) | |
8248 | |
8249 *** Gnus can re-send and bounce mail. | |
8250 | |
8251 Use the `S D r' and `S D b'. | |
8252 | |
8253 *** Groups can now have a score, and bubbling based on entry frequency | |
8254 is possible. | |
8255 | |
8256 (add-hook 'gnus-summary-exit-hook 'gnus-summary-bubble-group) | |
8257 | |
8258 *** Groups can be process-marked, and commands can be performed on | |
8259 groups of groups. | |
8260 | |
8261 *** Caching is possible in virtual groups. | |
8262 | |
8263 *** nndoc now understands all kinds of digests, mail boxes, rnews news | |
8264 batches, ClariNet briefs collections, and just about everything else. | |
8265 | |
8266 *** Gnus has a new backend (nnsoup) to create/read SOUP packets. | |
8267 | |
8268 *** The Gnus cache is much faster. | |
8269 | |
8270 *** Groups can be sorted according to many criteria. | |
8271 | |
8272 For instance: (setq gnus-group-sort-function 'gnus-group-sort-by-rank) | |
8273 | |
8274 *** New group parameters have been introduced to set list-address and | |
8275 expiration times. | |
8276 | |
8277 *** All formatting specs allow specifying faces to be used. | |
8278 | |
8279 *** There are several more commands for setting/removing/acting on | |
8280 process marked articles on the `M P' submap. | |
8281 | |
8282 *** The summary buffer can be limited to show parts of the available | |
8283 articles based on a wide range of criteria. These commands have been | |
8284 bound to keys on the `/' submap. | |
8285 | |
8286 *** Articles can be made persistent -- as an alternative to saving | |
8287 articles with the `*' command. | |
8288 | |
8289 *** All functions for hiding article elements are now toggles. | |
8290 | |
8291 *** Article headers can be buttonized. | |
8292 | |
8293 (add-hook 'gnus-article-display-hook 'gnus-article-add-buttons-to-head) | |
8294 | |
8295 *** All mail backends support fetching articles by Message-ID. | |
8296 | |
8297 *** Duplicate mail can now be treated properly. See the | |
8298 `nnmail-treat-duplicates' variable. | |
8299 | |
8300 *** All summary mode commands are available directly from the article | |
8301 buffer. | |
8302 | |
8303 *** Frames can be part of `gnus-buffer-configuration'. | |
8304 | |
8305 *** Mail can be re-scanned by a daemonic process. | |
8306 | |
8307 *** Gnus can make use of NoCeM files to filter spam. | |
8308 | |
8309 (setq gnus-use-nocem t) | |
8310 | |
8311 *** Groups can be made permanently visible. | |
8312 | |
8313 (setq gnus-permanently-visible-groups "^nnml:") | |
8314 | |
8315 *** Many new hooks have been introduced to make customizing easier. | |
8316 | |
8317 *** Gnus respects the Mail-Copies-To header. | |
8318 | |
8319 *** Threads can be gathered by looking at the References header. | |
8320 | |
8321 (setq gnus-summary-thread-gathering-function | |
8322 'gnus-gather-threads-by-references) | |
8323 | |
8324 *** Read articles can be stored in a special backlog buffer to avoid | |
8325 refetching. | |
8326 | |
8327 (setq gnus-keep-backlog 50) | |
8328 | |
8329 *** A clean copy of the current article is always stored in a separate | |
8330 buffer to allow easier treatment. | |
8331 | |
8332 *** Gnus can suggest where to save articles. See `gnus-split-methods'. | |
8333 | |
8334 *** Gnus doesn't have to do as much prompting when saving. | |
8335 | |
8336 (setq gnus-prompt-before-saving t) | |
8337 | |
8338 *** gnus-uu can view decoded files asynchronously while fetching | |
8339 articles. | |
8340 | |
8341 (setq gnus-uu-grabbed-file-functions 'gnus-uu-grab-view) | |
8342 | |
8343 *** Filling in the article buffer now works properly on cited text. | |
8344 | |
8345 *** Hiding cited text adds buttons to toggle hiding, and how much | |
8346 cited text to hide is now customizable. | |
8347 | |
8348 (setq gnus-cited-lines-visible 2) | |
8349 | |
8350 *** Boring headers can be hidden. | |
8351 | |
8352 (add-hook 'gnus-article-display-hook 'gnus-article-hide-boring-headers) | |
8353 | |
8354 *** Default scoring values can now be set from the menu bar. | |
8355 | |
8356 *** Further syntax checking of outgoing articles have been added. | |
8357 | |
8358 The Gnus manual has been expanded. It explains all these new features | |
8359 in greater detail. | |
8360 | |
8361 * Lisp Changes in Emacs 19.32 | |
8362 | |
8363 ** The function set-visited-file-name now accepts an optional | |
8364 second argument NO-QUERY. If it is non-nil, then the user is not | |
8365 asked for confirmation in the case where the specified file already | |
8366 exists. | |
8367 | |
8368 ** The variable print-length applies to printing vectors and bitvectors, | |
8369 as well as lists. | |
8370 | |
8371 ** The new function keymap-parent returns the parent keymap | |
8372 of a given keymap. | |
8373 | |
8374 ** The new function set-keymap-parent specifies a new parent for a | |
8375 given keymap. The arguments are KEYMAP and PARENT. PARENT must be a | |
8376 keymap or nil. | |
8377 | |
8378 ** Sometimes menu keymaps use a command name, a symbol, which is really | |
8379 an automatically generated alias for some other command, the "real" | |
8380 name. In such a case, you should give that alias symbol a non-nil | |
8381 menu-alias property. That property tells the menu system to look for | |
8382 equivalent keys for the real name instead of equivalent keys for the | |
8383 alias. | |
8384 | |
8385 * Editing Changes in Emacs 19.31 | |
8386 | |
8387 ** Freedom of the press restricted in the United States. | |
8388 | |
8389 Emacs has been censored in accord with the Communications Decency Act. | |
8390 This includes removing some features of the doctor program. That law | |
8391 was described by its supporters as a ban on pornography, but it bans | |
8392 far more than that. The Emacs distribution has never contained any | |
8393 pornography, but parts of it were nonetheless prohibited. | |
8394 | |
8395 For information on US government censorship of the Internet, and what | |
8396 you can do to bring back freedom of the press, see the web site | |
8397 `http://www.vtw.org/'. | |
8398 | |
8399 ** A note about C mode indentation customization. | |
8400 | |
8401 The old (Emacs 19.29) ways of specifying a C indentation style | |
8402 do not normally work in the new implementation of C mode. | |
8403 It has its own methods of customizing indentation, which are | |
8404 much more powerful than the old C mode. See the Editing Programs | |
8405 chapter of the manual for details. | |
8406 | |
8407 However, you can load the library cc-compat to make the old | |
8408 customization variables take effect. | |
8409 | |
8410 ** Marking with the mouse. | |
8411 | |
8412 When you mark a region with the mouse, the region now remains | |
8413 highlighted until the next input event, regardless of whether you are | |
8414 using M-x transient-mark-mode. | |
8415 | |
8416 ** Improved Windows NT/95 support. | |
8417 | |
8418 *** Emacs now supports scroll bars on Windows NT and Windows 95. | |
8419 | |
8420 *** Emacs now supports subprocesses on Windows 95. (Subprocesses used | |
8421 to work on NT only and not on 95.) | |
8422 | |
8423 *** There are difficulties with subprocesses, though, due to problems | |
8424 in Windows, beyond the control of Emacs. They work fine as long as | |
8425 you run Windows applications. The problems arise when you run a DOS | |
8426 application in a subprocesses. Since current shells run as DOS | |
8427 applications, these problems are significant. | |
8428 | |
8429 If you run a DOS application in a subprocess, then the application is | |
8430 likely to busy-wait, which means that your machine will be 100% busy. | |
8431 However, if you don't mind the temporary heavy load, the subprocess | |
8432 will work OK as long as you tell it to terminate before you start any | |
8433 other DOS application as a subprocess. | |
8434 | |
8435 Emacs is unable to terminate or interrupt a DOS subprocess. | |
8436 You have to do this by providing input directly to the subprocess. | |
8437 | |
8438 If you run two DOS applications at the same time in two separate | |
8439 subprocesses, even if one of them is asynchronous, you will probably | |
8440 have to reboot your machine--until then, it will remain 100% busy. | |
8441 Windows simply does not cope when one Windows process tries to run two | |
8442 separate DOS subprocesses. Typing CTL-ALT-DEL and then choosing | |
8443 Shutdown seems to work although it may take a few minutes. | |
8444 | |
8445 ** M-x resize-minibuffer-mode. | |
8446 | |
8447 This command, not previously mentioned in NEWS, toggles a mode in | |
8448 which the minibuffer window expands to show as many lines as the | |
8449 minibuffer contains. | |
8450 | |
8451 ** `title' frame parameter and resource. | |
8452 | |
8453 The `title' X resource now specifies just the frame title, nothing else. | |
8454 It does not affect the name used for looking up other X resources. | |
8455 It works by setting the new `title' frame parameter, which likewise | |
8456 affects just the displayed title of the frame. | |
8457 | |
8458 The `name' parameter continues to do what it used to do: | |
8459 it specifies the frame name for looking up X resources, | |
8460 and also serves as the default for the displayed title | |
8461 when the `title' parameter is unspecified or nil. | |
8462 | |
8463 ** Emacs now uses the X toolkit by default, if you have a new | |
8464 enough version of X installed (X11R5 or newer). | |
8465 | |
8466 ** When you compile Emacs with the Motif widget set, Motif handles the | |
8467 F10 key by activating the menu bar. To avoid confusion, the usual | |
8468 Emacs binding of F10 is replaced with a no-op when using Motif. | |
8469 | |
8470 If you want to be able to use F10 in Emacs, you can rebind the Motif | |
8471 menubar to some other key which you don't use. To do so, add | |
8472 something like this to your X resources file. This example rebinds | |
8473 the Motif menu bar activation key to S-F12: | |
8474 | |
8475 Emacs*defaultVirtualBindings: osfMenuBar : Shift<Key>F12 | |
8476 | |
8477 ** In overwrite mode, DEL now inserts spaces in most cases | |
8478 to replace the characters it "deletes". | |
8479 | |
8480 ** The Rmail summary now shows the number of lines in each message. | |
8481 | |
8482 ** Rmail has a new command M-x unforward-rmail-message, which extracts | |
8483 a forwarded message from the message that forwarded it. To use it, | |
8484 select a message which contains a forwarded message and then type the command. | |
8485 It inserts the forwarded message as a separate Rmail message | |
8486 immediately after the selected one. | |
8487 | |
8488 This command also undoes the textual modifications that are standardly | |
8489 made, as part of forwarding, by Rmail and other mail reader programs. | |
8490 | |
8491 ** Turning off saving of .saves-... files in your home directory. | |
8492 | |
8493 Each Emacs session writes a file named .saves-... in your home | |
8494 directory to record which files M-x recover-session should recover. | |
8495 If you exit Emacs normally with C-x C-c, it deletes that file. If | |
8496 Emacs or the operating system crashes, the file remains for M-x | |
8497 recover-session. | |
8498 | |
8499 You can turn off the writing of these files by setting | |
8500 auto-save-list-file-name to nil. If you do this, M-x recover-session | |
8501 will not work. | |
8502 | |
8503 Some previous Emacs versions failed to delete these files even on | |
8504 normal exit. This is fixed now. If you are thinking of turning off | |
8505 this feature because of past experiences with versions that had this | |
8506 bug, it would make sense to check whether you still want to do so | |
8507 now that the bug is fixed. | |
8508 | |
8509 ** Changes to Version Control (VC) | |
8510 | |
8511 There is a new variable, vc-follow-symlinks. It indicates what to do | |
8512 when you visit a link to a file that is under version control. | |
8513 Editing the file through the link bypasses the version control system, | |
8514 which is dangerous and probably not what you want. | |
8515 | |
8516 If this variable is t, VC follows the link and visits the real file, | |
8517 telling you about it in the echo area. If it is `ask' (the default), | |
8518 VC asks for confirmation whether it should follow the link. If nil, | |
8519 the link is visited and a warning displayed. | |
8520 | |
8521 ** iso-acc.el now lets you specify a choice of language. | |
8522 Languages include "latin-1" (the default) and "latin-2" (which | |
8523 is designed for entering ISO Latin-2 characters). | |
8524 | |
8525 There are also choices for specific human languages such as French and | |
8526 Portuguese. These are subsets of Latin-1, which differ in that they | |
8527 enable only the accent characters needed for particular language. | |
8528 The other accent characters, not needed for the chosen language, | |
8529 remain normal. | |
8530 | |
8531 ** Posting articles and sending mail now has M-TAB completion on various | |
8532 header fields (Newsgroups, To, CC, ...). | |
8533 | |
8534 Completion in the Newsgroups header depends on the list of groups | |
8535 known to your news reader. Completion in the Followup-To header | |
8536 offers those groups which are in the Newsgroups header, since | |
8537 Followup-To usually just holds one of those. | |
8538 | |
8539 Completion in fields that hold mail addresses works based on the list | |
8540 of local users plus your aliases. Additionally, if your site provides | |
8541 a mail directory or a specific host to use for any unrecognized user | |
8542 name, you can arrange to query that host for completion also. (See the | |
8543 documentation of variables `mail-directory-process' and | |
8544 `mail-directory-stream'.) | |
8545 | |
8546 ** A greatly extended sgml-mode offers new features such as (to be configured) | |
8547 skeletons with completing read for tags and attributes, typing named | |
8548 characters including optionally all 8bit characters, making tags invisible | |
8549 with optional alternate display text, skipping and deleting tag(pair)s. | |
8550 | |
8551 Note: since Emacs' syntax feature cannot limit the special meaning of ', " and | |
8552 - to inside <>, for some texts the result, especially of font locking, may be | |
8553 wrong (see `sgml-specials' if you get wrong results). | |
8554 | |
8555 The derived html-mode configures this with tags and attributes more or | |
8556 less HTML3ish. It also offers optional quick keys like C-c 1 for | |
8557 headline or C-c u for unordered list (see `html-quick-keys'). Edit / | |
8558 Text Properties / Face or M-g combinations create tags as applicable. | |
8559 Outline minor mode is supported and level 1 font-locking tries to | |
8560 fontify tag contents (which only works when they fit on one line, due | |
8561 to a limitation in font-lock). | |
8562 | |
8563 External viewing via browse-url can occur automatically upon saving. | |
8564 | |
8565 ** M-x imenu-add-to-menubar now adds to the menu bar for the current | |
8566 buffer only. If you want to put an Imenu item in the menu bar for all | |
8567 buffers that use a particular major mode, use the mode hook, as in | |
8568 this example: | |
8569 | |
8570 (add-hook 'emacs-lisp-mode-hook | |
8571 '(lambda () (imenu-add-to-menubar "Index"))) | |
8572 | |
8573 ** Changes in BibTeX mode. | |
8574 | |
8575 *** Field names may now contain digits, hyphens, and underscores. | |
8576 | |
8577 *** Font Lock mode is now supported. | |
8578 | |
8579 *** bibtex-make-optional-field is no longer interactive. | |
8580 | |
8581 *** If bibtex-maintain-sorted-entries is non-nil, inserting new | |
8582 entries is now done with a faster algorithm. However, inserting | |
8583 will fail in this case if the buffer contains invalid entries or | |
8584 isn't in sorted order, so you should finish each entry with C-c C-c | |
8585 (bibtex-close-entry) after you have inserted or modified it. | |
8586 The default value of bibtex-maintain-sorted-entries is nil. | |
8587 | |
8588 *** Function `show-all' is no longer bound to a key, since C-u C-c C-q | |
8589 does the same job. | |
8590 | |
8591 *** Entries with quotes inside quote-delimited fields (as `author = | |
8592 "Stefan Sch{\"o}f"') are now supported. | |
8593 | |
8594 *** Case in field names doesn't matter anymore when searching for help | |
8595 text. | |
8596 | |
8597 ** Font Lock mode | |
8598 | |
8599 *** Global Font Lock mode | |
8600 | |
8601 Font Lock mode can be turned on globally, in buffers that support it, by the | |
8602 new command global-font-lock-mode. You can use the new variable | |
8603 font-lock-global-modes to control which modes have Font Lock mode automagically | |
8604 turned on. By default, this variable is set so that Font Lock mode is turned | |
8605 on globally where the buffer mode supports it. | |
8606 | |
8607 For example, to automagically turn on Font Lock mode where supported, put: | |
8608 | |
8609 (global-font-lock-mode t) | |
8610 | |
8611 in your ~/.emacs. | |
8612 | |
8613 *** Local Refontification | |
8614 | |
8615 In Font Lock mode, editing a line automatically refontifies that line only. | |
8616 However, if your change alters the syntactic context for following lines, | |
8617 those lines remain incorrectly fontified. To refontify them, use the new | |
8618 command M-g M-g (font-lock-fontify-block). | |
8619 | |
8620 In certain major modes, M-g M-g refontifies the entire current function. | |
8621 (The variable font-lock-mark-block-function controls how to find the | |
8622 current function.) In other major modes, M-g M-g refontifies 16 lines | |
8623 above and below point. | |
8624 | |
8625 With a prefix argument N, M-g M-g refontifies N lines above and below point. | |
8626 | |
8627 ** Follow mode | |
8628 | |
8629 Follow mode is a new minor mode combining windows showing the same | |
8630 buffer into one tall "virtual window". The windows are typically two | |
8631 side-by-side windows. Follow mode makes them scroll together as if | |
8632 they were a unit. To use it, go to a frame with just one window, | |
8633 split it into two side-by-side windows using C-x 3, and then type M-x | |
8634 follow-mode. | |
8635 | |
8636 M-x follow-mode turns off Follow mode if it is already enabled. | |
8637 | |
8638 To display two side-by-side windows and activate Follow mode, use the | |
8639 command M-x follow-delete-other-windows-and-split. | |
8640 | |
8641 ** hide-show changes. | |
8642 | |
8643 The hooks hs-hide-hooks and hs-show-hooks have been renamed | |
8644 to hs-hide-hook and hs-show-hook, to follow the convention for | |
8645 normal hooks. | |
8646 | |
8647 ** Simula mode now has a menu containing the most important commands. | |
8648 The new command simula-indent-exp is bound to C-M-q. | |
8649 | |
8650 ** etags can now handle programs written in Erlang. Files are | |
8651 recognised by the extensions .erl and .hrl. The tagged lines are | |
8652 those that begin a function, record, or macro. | |
8653 | |
8654 ** MSDOS Changes | |
8655 | |
8656 *** It is now possible to compile Emacs with the version 2 of DJGPP. | |
8657 Compilation with DJGPP version 1 also still works. | |
8658 | |
8659 *** The documentation of DOS-specific aspects of Emacs was rewritten | |
8660 and expanded; see the ``MS-DOS'' node in the on-line docs. | |
8661 | |
8662 *** Emacs now uses ~ for backup file names, not .bak. | |
8663 | |
8664 *** You can simulate mouse-3 on two-button mice by simultaneously | |
8665 pressing both mouse buttons. | |
8666 | |
8667 *** A number of packages and commands which previously failed or had | |
8668 restricted functionality on MS-DOS, now work. The most important ones | |
8669 are: | |
8670 | |
8671 **** Printing (both with `M-x lpr-buffer' and with `ps-print' package) | |
8672 now works. | |
8673 | |
8674 **** `Ediff' works (in a single-frame mode). | |
8675 | |
8676 **** `M-x display-time' can be used on MS-DOS (due to the new | |
8677 implementation of Emacs timers, see below). | |
8678 | |
8679 **** `Dired' supports Unix-style shell wildcards. | |
8680 | |
8681 **** The `c-macro-expand' command now works as on other platforms. | |
8682 | |
8683 **** `M-x recover-session' works. | |
8684 | |
8685 **** `M-x list-colors-display' displays all the available colors. | |
8686 | |
8687 **** The `TPU-EDT' package works. | |
8688 | |
8689 * Lisp changes in Emacs 19.31. | |
8690 | |
8691 ** The function using-unix-filesystems on Windows NT and Windows 95 | |
8692 tells Emacs to read and write files assuming that they reside on a | |
8693 remote Unix filesystem. No CR/LF translation is done on any files in | |
8694 this case. Invoking using-unix-filesystems with t activates this | |
8695 behavior, and invoking it with any other value deactivates it. | |
8696 | |
8697 ** Change in system-type and system-configuration values. | |
8698 | |
8699 The value of system-type on a Linux-based GNU system is now `lignux', | |
8700 not `linux'. This means that some programs which use `system-type' | |
8701 need to be changed. The value of `system-configuration' will also | |
8702 be different. | |
8703 | |
8704 It is generally recommended to use `system-configuration' rather | |
8705 than `system-type'. | |
8706 | |
8707 See the file LINUX-GNU in this directory for more about this. | |
8708 | |
8709 ** The functions shell-command and dired-call-process | |
8710 now run file name handlers for default-directory, if it has them. | |
8711 | |
8712 ** Undoing the deletion of text now restores the positions of markers | |
8713 that pointed into or next to the deleted text. | |
8714 | |
8715 ** Timers created with run-at-time now work internally to Emacs, and | |
8716 no longer use a separate process. Therefore, they now work more | |
8717 reliably and can be used for shorter time delays. | |
8718 | |
8719 The new function run-with-timer is a convenient way to set up a timer | |
8720 to run a specified amount of time after the present. A call looks | |
8721 like this: | |
8722 | |
8723 (run-with-timer SECS REPEAT FUNCTION ARGS...) | |
8724 | |
8725 SECS says how many seconds should elapse before the timer happens. | |
8726 It may be an integer or a floating point number. When the timer | |
8727 becomes ripe, the action is to call FUNCTION with arguments ARGS. | |
8728 | |
8729 REPEAT gives the interval for repeating the timer (measured in | |
8730 seconds). It may be an integer or a floating point number. nil or 0 | |
8731 means don't repeat at all--call FUNCTION just once. | |
8732 | |
8733 *** with-timeout provides an easy way to do something but give | |
8734 up if too much time passes. | |
8735 | |
8736 (with-timeout (SECONDS TIMEOUT-FORMS...) BODY...) | |
8737 | |
8738 This executes BODY, but gives up after SECONDS seconds. | |
8739 If it gives up, it runs the TIMEOUT-FORMS and returns the value | |
8740 of the last one of them. Normally it returns the value of the last | |
8741 form in BODY. | |
8742 | |
8743 *** You can now arrange to call a function whenever Emacs is idle for | |
8744 a certain length of time. To do this, call run-with-idle-timer. A | |
8745 call looks like this: | |
8746 | |
8747 (run-with-idle-timer SECS REPEAT FUNCTION ARGS...) | |
8748 | |
8749 SECS says how many seconds of idleness should elapse before the timer | |
8750 runs. It may be an integer or a floating point number. When the | |
8751 timer becomes ripe, the action is to call FUNCTION with arguments | |
8752 ARGS. | |
8753 | |
8754 Emacs becomes idle whenever it finishes executing a keyboard or mouse | |
8755 command. It remains idle until it receives another keyboard or mouse | |
8756 command. | |
8757 | |
8758 REPEAT, if non-nil, means this timer should be activated again each | |
8759 time Emacs becomes idle and remains idle for SECS seconds The timer | |
8760 does not repeat if Emacs *remains* idle; it runs at most once after | |
8761 each time Emacs becomes idle. | |
8762 | |
8763 If REPEAT is nil, the timer runs just once, the first time Emacs is | |
8764 idle for SECS seconds. | |
8765 | |
8766 *** post-command-idle-hook is now obsolete; you shouldn't use it at | |
8767 all, because it interferes with the idle timer mechanism. If your | |
8768 programs use post-command-idle-hook, convert them to use idle timers | |
8769 instead. | |
8770 | |
8771 *** y-or-n-p-with-timeout lets you ask a question but give up if | |
8772 there is no answer within a certain time. | |
8773 | |
8774 (y-or-n-p-with-timeout PROMPT SECONDS DEFAULT-VALUE) | |
8775 | |
8776 asks the question PROMPT (just like y-or-n-p). If the user answers | |
8777 within SECONDS seconds, it returns the answer that the user gave. | |
8778 Otherwise it gives up after SECONDS seconds, and returns DEFAULT-VALUE. | |
8779 | |
8780 ** Minor change to `encode-time': you can now pass more than seven | |
8781 arguments. If you do that, the first six arguments have the usual | |
8782 meaning, the last argument is interpreted as the time zone, and the | |
8783 arguments in between are ignored. | |
8784 | |
8785 This means that it works to use the list returned by `decode-time' as | |
8786 the list of arguments for `encode-time'. | |
8787 | |
8788 ** The default value of load-path now includes the directory | |
8789 /usr/local/share/emacs/VERSION/site-lisp In addition to | |
8790 /usr/local/share/emacs/site-lisp. You can use this new directory for | |
8791 site-specific Lisp packages that belong with a particular Emacs | |
8792 version. | |
8793 | |
8794 It is not unusual for a Lisp package that works well in one Emacs | |
8795 version to cause trouble in another. Sometimes packages need updating | |
8796 for incompatible changes; sometimes they look at internal data that | |
8797 has changed; sometimes the package has been installed in Emacs itself | |
8798 and the installed version should be used. Whatever the reason for the | |
8799 problem, this new feature makes it easier to solve. | |
8800 | |
8801 ** When your program contains a fixed file name (like .completions or | |
8802 .abbrev.defs), the file name usually needs to be different on operating | |
8803 systems with limited file name syntax. | |
8804 | |
8805 Now you can avoid ad-hoc conditionals by using the function | |
8806 convert-standard-filename to convert the file name to a proper form | |
8807 for each operating system. Here is an example of use, from the file | |
8808 completions.el: | |
8809 | |
8810 (defvar save-completions-file-name | |
8811 (convert-standard-filename "~/.completions") | |
8812 "*The filename to save completions to.") | |
8813 | |
8814 This sets the variable save-completions-file-name to a value that | |
8815 depends on the operating system, because the definition of | |
8816 convert-standard-filename depends on the operating system. On | |
8817 Unix-like systems, it returns the specified file name unchanged. On | |
8818 MS-DOS, it adapts the name to fit the limitations of that system. | |
8819 | |
8820 ** The interactive spec N now returns the numeric prefix argument | |
8821 rather than the raw prefix argument. (It still reads a number using the | |
8822 minibuffer if there is no prefix argument at all.) | |
8823 | |
8824 ** When a process is deleted, this no longer disconnects the process | |
8825 marker from its buffer position. | |
8826 | |
8827 ** The variable garbage-collection-messages now controls whether | |
8828 Emacs displays a message at the beginning and end of garbage collection. | |
8829 The default is nil, meaning there are no messages. | |
8830 | |
8831 ** The variable debug-ignored-errors specifies certain kinds of errors | |
8832 that should not enter the debugger. Its value is a list of error | |
8833 condition symbols and/or regular expressions. If the error has any | |
8834 of the condition symbols listed, or if any of the regular expressions | |
8835 matches the error message, then that error does not enter the debugger, | |
8836 regardless of the value of debug-on-error. | |
8837 | |
8838 This variable is initialized to match certain common but uninteresting | |
8839 errors that happen often during editing. | |
8840 | |
8841 ** The new function error-message-string converts an error datum | |
8842 into its error message. The error datum is what condition-case | |
8843 puts into the variable, to describe the error that happened. | |
8844 | |
8845 ** Anything that changes which buffer appears in a given window | |
8846 now runs the window-scroll-functions for that window. | |
8847 | |
8848 ** The new function get-buffer-window-list returns a list of windows displaying | |
8849 a buffer. The function is called with the buffer (a buffer object or a buffer | |
8850 name) and two optional arguments specifying the minibuffer windows and frames | |
8851 to search. Therefore this function takes optional args like next-window etc., | |
8852 and not get-buffer-window. | |
8853 | |
8854 ** buffer-substring now runs the hook buffer-access-fontify-functions, | |
8855 calling each function with two arguments--the range of the buffer | |
8856 being accessed. buffer-substring-no-properties does not call them. | |
8857 | |
8858 If you use this feature, you should set the variable | |
8859 buffer-access-fontified-property to a non-nil symbol, which is a | |
8860 property name. Then, if all the characters in the buffer range have a | |
8861 non-nil value for that property, the buffer-access-fontify-functions | |
8862 are not called. When called, these functions should put a non-nil | |
8863 property on the text that they fontify, so that they won't get called | |
8864 over and over for the same text. | |
8865 | |
8866 ** Changes in lisp-mnt.el | |
8867 | |
8868 *** The lisp-mnt package can now recognize file headers that are written | |
8869 in the formats used by the `what' command and the RCS `ident' command: | |
8870 | |
8871 ;; @(#) HEADER: text | |
8872 ;; $HEADER: text $ | |
8873 | |
8874 in addition to the normal | |
8875 | |
8876 ;; HEADER: text | |
8877 | |
8878 *** The commands lm-verify and lm-synopsis are now interactive. lm-verify | |
8879 checks that the library file has proper sections and headers, and | |
8880 lm-synopsis extracts first line "synopsis'"information. | |
8881 | |
8882 | |
8883 | |
8884 * For older news, see the file ONEWS | |
25853 | 8885 |
8886 ---------------------------------------------------------------------- | |
8887 Copyright information: | |
8888 | |
31007 | 8889 Copyright (C) 1999, 2000 Free Software Foundation, Inc. |
25853 | 8890 |
8891 Permission is granted to anyone to make or distribute verbatim copies | |
8892 of this document as received, in any medium, provided that the | |
8893 copyright notice and this permission notice are preserved, | |
8894 thus giving the recipient permission to redistribute in turn. | |
8895 | |
8896 Permission is granted to distribute modified versions | |
8897 of this document, or of portions of it, | |
8898 under the above conditions, provided also that they | |
8899 carry prominent notices stating who last changed them. | |
8900 | |
8901 Local variables: | |
8902 mode: outline | |
8903 paragraph-separate: "[ ]*$" | |
8904 end: |