annotate make-dist @ 25976:8565fbac98d7

Use "pop3" as the POP service name on all platforms, instead of using "pop" on Unix and "pop3" on Windows NT. "pop3" has been the standard service name since RFC 1340 was published in July 1992, so I think it's safe to start using it by default.

#!/bin/sh

#### make-dist: create an Emacs distribution tar file from the current
#### source tree.  This basically creates a duplicate directory
#### structure, and then hard links into it only those files that should
#### be distributed.  This means that if you add a file with an odd name,
#### you should make sure that this script will include it.

# Copyright (C) 1995, 1997, 1998 Free Software Foundation, Inc.
#
# This file is part of GNU Emacs.
#
# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING.  If not, write to the
# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.

progname="$0"

### Exit if a command fails.
### set -e

### Print out each line we read, for debugging's sake.
### set -v

## Don't restrict access to any files.
umask 0

update=yes
check=yes
clean_up=no
make_tar=no
newer=""

while [ $# -gt 0 ]; do
  case "$1" in
    ## This option tells make-dist to delete the staging directory
    ## when done.  It is useless to use this unless you make a tar file.
    "--clean-up" )
      clean_up=yes
    ;;
    ## This option tells make-dist to make a tar file.
    "--tar" )
      make_tar=yes
    ;;
    ## This option tells make-dist not to recompile or do analogous things.
    "--no-update" )
      update=no
    ;;
    ## This option says don't check for bad file names, etc.
    "--no-check" )
      check=no
    ;;
    ## This option tells make-dist to make the distribution normally, then
    ## remove all files older than the given timestamp file.  This is useful
    ## for creating incremental or patch distributions.
    "--newer")
      newer="$2"
      new_extension=".new"
      shift
    ;;
    ## This option tells make-dist to use `compress' instead of gzip.
    ## Normally, make-dist uses gzip whenever it is present.
    "--compress")
      default_gzip="compress"
    ;;
    * )
      echo "${progname}: Unrecognized argument: $1" >&2
      exit 1
    ;;
  esac
  shift
done

### Make sure we're running in the right place.
if [ ! -d src -o ! -f src/lisp.h -o ! -d lisp -o ! -f lisp/version.el ]; then
  echo "${progname}: Can't find \`src/lisp.h' and \`lisp/version.el'." >&2
  echo "${progname} must be run in the top directory of the Emacs" >&2
  echo "distribution tree.  cd to that directory and try again." >&2
  exit 1
fi

### Find where to run Emacs.
### (We don't accept EMACS=t as an answer, since that probably only means
### that the shell is running in an Emacs window.)
if [ $update = yes ];
then
  unset EMACS_UNIBYTE
  if [ -f src/emacs ];
  then
    EMACS=`pwd`/src/emacs
  else
    if [ "x$EMACS" = "x" -o "x$EMACS" = "xt" ];
    then 
      echo You must specify the EMACS environment variable 2>&1
      exit 1
    fi
  fi
fi

### Find out which version of Emacs this is.
shortversion=`grep 'defconst[	 ]*emacs-version' lisp/version.el \
	 | sed -e 's/^.*"\([0-9][0-9]*\.[0-9][0-9]*\).*$/\1/'`
version=`grep 'defconst[	 ]*emacs-version' lisp/version.el \
	 | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
if [ ! "${version}" ]; then
  echo "${progname}: can't find current Emacs version in \`./lisp/version.el'" >&2
  exit 1
fi

echo Version numbers are $version and $shortversion

if [ $update = yes ];
then
  if grep -s "GNU Emacs version ${shortversion}" ./man/emacs.texi > /dev/null; then
    true
  else
    echo "You must update the version number in \`./man/emacs.texi'"
    sleep 5
  fi
fi

### Make sure we don't already have a directory  emacs-${version}.

emacsname="emacs-${version}${new_extension}"

if [ -d ${emacsname} ]
then
  echo Directory "${emacsname}" already exists >&2
  exit 1
fi

### Make sure the subdirectory is available.
tempparent="make-dist.tmp.$$"
if [ -d ${tempparent} ]; then
  echo "${progname}: staging directory \`${tempparent}' already exists.
Perhaps a previous invocation of \`${progname}' failed to clean up after
itself.  Check that directories whose names are of the form
\`make-dist.tmp.NNNNN' don't contain any important information, remove
them, and try again." >&2
  exit 1
fi

### Find where to run Emacs.
if [ $check = yes ];
then
  ### Check for .elc files with no corresponding .el file.
  ls -1 lisp/[a-z]*.el lisp/[a-z]*/[a-z]*.el \
	leim/[a-z]*.el leim/[a-z]*/[a-z]*.el | sed 's/\.el$/.elc/' > /tmp/el
  ls -1 lisp/[a-z]*.elc lisp/[a-z]*/[a-z]*.elc \
	leim/[a-z]*.elc leim/[a-z]*/[a-z]*.elc > /tmp/elc
  bogosities="`comm -13 /tmp/el /tmp/elc`"
  if [ "${bogosities}" != "" ]; then
    echo "The following .elc files have no corresponding .el files:"
    echo "${bogosities}"
  fi
  rm -f /tmp/el /tmp/elc

  ### Check for .el files with no corresponding .elc file.
  (cd lisp; ls -1 [a-z]*.el [a-z]*/[a-z]*.el ; \
   cd ../leim; ls -1 [a-z]*.el [a-z]*/[a-z]*.el) > /tmp/el
  (cd lisp; ls -1 [a-z]*.elc [a-z]*/[a-z]*.elc; \
   cd ../leim; ls -1 [a-z]*.elc [a-z]*/[a-z]*.elc) | sed 's/\.elc$/.el/' > /tmp/elc
  losers="`comm -23 /tmp/el /tmp/elc`"
  bogosities=
  for file in $losers; do
    file1=`echo $file | sed -e "s|.*/||"`
    if ! sed -n -e "/^DONTCOMPILE/,/[^\\]\$/p" lisp/Makefile |
	 grep -q "[ 	]$file1\($\| \)"; then
      case $file in
	site-init.el | site-load.el | site-start.el | default.el)
	  ;;
	term/*)
	  ;;
	*)
	  bogosities="$file $bogosities"
	  ;;
      esac
    fi
  done
  if [ x"${bogosities}" != x"" ]; then
    echo "The following .el files have no corresponding .elc files:"
    echo "${bogosities}"
  fi
  rm -f /tmp/el /tmp/elc

  ### Check for .el files that would overflow the 14-char limit if compiled.
  long=`find lisp leim -name '[a-zA-Z0-9]??????????*.el' -print`
  if [ "$long" != "" ]; then
    echo "The following .el file names are too long:"
    echo "$long"
  fi
fi

### Make sure configure is newer than configure.in.
if [ "x`ls -t configure configure.in | head -1`" != "xconfigure" ]; then
  echo "\`./configure.in' is newer than \`./configure'" >&2
  echo "Running autoconf" >&2
  autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; }
fi

if [ $update = yes ];
then
  echo "Updating Info files"

  (cd man; make -f Makefile.in srcdir=. info)

  echo "Updating finder, custom and autoload data"

  (cd lisp; make updates EMACS="$EMACS")

  echo "Updating leim-list.el"

  (cd leim; make leim-list.el EMACS="$EMACS")

  echo "Recompiling Lisp files"

  $EMACS -batch -f batch-byte-recompile-directory lisp leim
fi

echo "Making lisp/MANIFEST"

(cd lisp;
 files=`echo [!=]*.el | sed -e 's/ subdirs.el / /' -e 's/ default.el / /'`
 for dir in [!=]*; do
  if [ -d $dir ] && [ $dir != term ] && [ $dir != RCS ]; then
    echo $dir
    thisdir=`echo $dir/[!=]*.el | sed -e 's/ subdirs.el / /'`
    files="$files $thisdir"
  fi
 done
 head -1 $files | grep '^;' | sed -e 's/;;; //' | sort > MANIFEST)

echo "Creating staging directory: \`${tempparent}'"

mkdir ${tempparent}
tempdir="${tempparent}/${emacsname}"

### This trap ensures that the staging directory will be cleaned up even
### when the script is interrupted in mid-career.
if [ "${clean_up}" = yes ]; then
  trap "echo 'Interrupted...cleaning up the staging directory'; rm -rf ${tempparent}; exit 1" 1 2 15
fi

echo "Creating top directory: \`${tempdir}'"
mkdir ${tempdir}

### We copy in the top-level files before creating the subdirectories in
### hopes that this will make the top-level files appear first in the
### tar file; this means that people can start reading the INSTALL and
### README while the rest of the tar file is still unpacking.  Whoopee.
echo "Making links to top-level files"
ln GETTING.GNU.SOFTWARE INSTALL README BUGS move-if-change ${tempdir}
ln ChangeLog Makefile.in configure configure.in ${tempdir}
ln config.bat make-dist update-subdirs vpath.sed ${tempdir}
### Copy these files; they're cross-filesystem symlinks.
cp mkinstalldirs ${tempdir}
cp config.sub ${tempdir}
cp config.guess ${tempdir}
cp install.sh ${tempdir}

echo "Updating version number in README"
(cd ${tempdir}
 awk \
   '$1 " " $2 " " $3 " " $4 " " $5 == "This directory tree holds version" { $6 = version; print $0 }
    $1 " " $2 " " $3 " " $4 " " $5 != "This directory tree holds version"' \
   version=${version} README > tmp.README
 mv -f tmp.README README)


echo "Creating subdirectories"
for subdir in lisp site-lisp leim real-leim real-leim/CXTERM-DIC \
	      real-leim/SKK-DIC real-leim/skk real-leim/quail \
	      src src/m src/s src/bitmaps lib-src oldXMenu lwlib \
	      nt nt/inc nt/inc/sys nt/inc/arpa nt/inc/netinet nt/icons \
	      etc etc/e lock info man msdos vms; do
  mkdir ${tempdir}/${subdir}
done

echo "Initializing \`leim' subdirectory"
cp leim-Makefile.in ${tempdir}/leim/Makefile.in

echo "Making links to \`lisp' and its subdirectories"
### Don't distribute TAGS, =*.el files, site-init.el, site-load.el, or default.el.
(cd lisp
 ln [a-zA-Z]*.el ../${tempdir}/lisp
 ln [a-zA-Z]*.elc ../${tempdir}/lisp
 ln [a-zA-Z]*.dat ../${tempdir}/lisp
 ## simula.el doesn't keep abbreviations in simula.defns any more.
 ## ln [a-zA-Z]*.defns ../${tempdir}/lisp
 ln ChangeLog Makefile makefile.nt ChangeLog.? README ../${tempdir}/lisp
 (cd ../${tempdir}/lisp
  rm -f TAGS =*
  rm -f site-init site-init.el site-init.elc
  rm -f site-load site-load.el site-load.elc
  rm -f site-start site-start.el site-start.elc
  rm -f default default.el default.elc
  )

 ## Find all subdirs of lisp dir
 for file in `find . -type d -print`; do
   case $file in
     . | .. | */Old | */RCS | */=*)
       ;;	
     *)
       if [ -d $file ]; then
	 subdirs="$file $subdirs"
       fi
       ;;
   esac
 done

 for file in $subdirs; do
   echo "  lisp/$file"
   mkdir ../${tempdir}/lisp/$file
   ln $file/[a-zA-Z]*.el ../${tempdir}/lisp/$file
   ln $file/[a-zA-Z]*.elc ../${tempdir}/lisp/$file
   if [ -f $file/README ]; then
     ln $file/README ../${tempdir}/lisp/$file
   fi
   if [ -f $file/ChangeLog ]; then
     ln $file/ChangeLog ../${tempdir}/lisp/$file
   fi
 done )

echo "Making links to \`leim' and its subdirectories for the LEIM distribution"
### Don't distribute TAGS, or =*.el files.
(cd leim
 ln Makefile.in makefile.nt ../${tempdir}/real-leim
 ln ChangeLog README ../${tempdir}/real-leim

 ln CXTERM-DIC/*.tit ../${tempdir}/real-leim/CXTERM-DIC
 ln SKK-DIC/README SKK-DIC/SKK-JISYO.L ../${tempdir}/real-leim/SKK-DIC
 ln skk/*.el skk/*.elc ../${tempdir}/real-leim/skk
 ln quail/*.el quail/*.elc ../${tempdir}/real-leim/quail

 cd ../${tempdir}/real-leim
 rm -f TAGS =* */=*)

### Move the real-leim directory outside of Emacs proper.
(cd ${tempparent}
 mkdir ${emacsname}-leim
 mkdir ${emacsname}-leim/${emacsname}
 mv ${emacsname}/real-leim ${emacsname}-leim/${emacsname}/leim)

echo "Making links to \`src'"
### Don't distribute =*.[ch] files, or the configured versions of
### config.in, paths.in, or Makefile.in, or TAGS.
(cd src
 echo "  (It is ok if ln fails in some cases.)"
 ln [a-zA-Z]*.c ../${tempdir}/src
 ln [a-zA-Z]*.h ../${tempdir}/src
 ln [a-zA-Z]*.s ../${tempdir}/src
 ln [a-zA-Z]*.in ../${tempdir}/src
 ln [a-zA-Z]*.opt ../${tempdir}/src
 ## If we ended up with a symlink, or if we did not get anything
 ## due to a cross-device symlink, copy the file.
 for file in [a-zA-Z]*.[hcs] [a-zA-Z]*.in [a-zA-Z]*.opt; do
   if test -f ../${tempdir}/src/$file; then
     # test -f appears to succeed for a symlink
     if test -L ../${tempdir}/src/$file; then
       rm ../${tempdir}/src/$file
       cp -p $file ../${tempdir}/src
       chmod a-w ../${tempdir}/src/$file
     fi
   else
     rm ../${tempdir}/src/$file
     cp -p $file ../${tempdir}/src
     chmod a-w ../${tempdir}/src/$file
   fi
 done
 ln README ChangeLog ChangeLog.*[0-9] ../${tempdir}/src
 ln makefile.nt vms-pp.trans ../${tempdir}/src
 ln .gdbinit .dbxinit ../${tempdir}/src
 cd ../${tempdir}/src
 rm -f config.h paths.h Makefile Makefile.c
 rm -f =* TAGS)

echo "Making links to \`src/bitmaps'"
(cd src/bitmaps
 ln README *.xbm ../../${tempdir}/src/bitmaps)

echo "Making links to \`src/m'"
(cd src/m
 # We call files for miscellaneous input (to linker etc) .inp.
 ln README [a-zA-Z0-9]*.h *.inp ../../${tempdir}/src/m)

echo "Making links to \`src/s'"
(cd src/s
 ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/s)

echo "Making links to \`lib-src'"
(cd lib-src
 ln [a-zA-Z]*.[chy] ../${tempdir}/lib-src
 ln ChangeLog Makefile.in README testfile vcdiff ../${tempdir}/lib-src
 ln emacs.csh rcs2log rcs-checkin makefile.nt ../${tempdir}/lib-src
 ## If we ended up with a symlink, or if we did not get anything
 ## due to a cross-device symlink, copy the file.
 for file in [a-zA-Z]*.[chy]; do
   if test -f ../${tempdir}/lib-src/$file; then
     # test -f appears to succeed for a symlink
     if test -L ../${tempdir}/lib-src/$file; then
       rm ../${tempdir}/lib-src/$file
       cp $file ../${tempdir}/lib-src
       chmod a-w ../${tempdir}/lib-src/$file
     fi
   else
     rm ../${tempdir}/lib-src/$file
     cp $file ../${tempdir}/lib-src
     chmod a-w ../${tempdir}/lib-src/$file
   fi
 done
 cd ../${tempdir}/lib-src
 rm -f Makefile.c
 rm -f =* TAGS)

echo "Making links to \`nt'"
(cd nt
 ln emacs.ico emacs.rc config.nt [a-z]*.in [a-z]*.c ../${tempdir}/nt
 ln [a-z]*.bat [a-z]*.h makefile.def makefile.nt ../${tempdir}/nt
 ln TODO ChangeLog INSTALL README ../${tempdir}/nt)

echo "Making links to \`nt/inc'"
(cd nt/inc
 ln [a-z]*.h ../../${tempdir}/nt/inc)

echo "Making links to \`nt/inc/sys'"
(cd nt/inc/sys
 ln [a-z]*.h ../../../${tempdir}/nt/inc/sys)

echo "Making links to \`nt/inc/arpa'"
(cd nt/inc/arpa
 ln [a-z]*.h ../../../${tempdir}/nt/inc/arpa)

echo "Making links to \`nt/inc/netinet'"
(cd nt/inc/netinet
 ln [a-z]*.h ../../../${tempdir}/nt/inc/netinet)

echo "Making links to \`nt/icons'"
(cd nt/icons
 ln [a-z]*.ico ../../${tempdir}/nt/icons)

echo "Making links to \`msdos'"
(cd msdos
 ln  ChangeLog emacs.ico emacs.pif ../${tempdir}/msdos
 ln is_exec.c sigaction.c mainmake mainmake.v2 sed*.inp ../${tempdir}/msdos
 cd ../${tempdir}/msdos
 rm -f =*)

echo "Making links to \`oldXMenu'"
(cd oldXMenu
 ln *.c *.h *.in ../${tempdir}/oldXMenu
 ln README Imakefile ChangeLog ../${tempdir}/oldXMenu
 ln compile.com descrip.mms ../${tempdir}/oldXMenu)

echo "Making links to \`lwlib'"
(cd lwlib
 ln *.c *.h *.in ../${tempdir}/lwlib
 ln README Imakefile ChangeLog ../${tempdir}/lwlib
 cd ../${tempdir}/lwlib
 rm -f lwlib-Xol*)

echo "Making links to \`etc'"
### Don't distribute = files, TAGS, DOC files, backups, autosaves, or
### tex litter.
(cd etc
 files=`ls -d * | grep -v 'RCS' | grep -v 'Old' | grep -v '^e$'`
 ln $files ../${tempdir}/etc
 ## If we ended up with a symlink, or if we did not get anything
 ## due to a cross-device symlink, copy the file.
 for file in $files; do
   if test -f ../${tempdir}/etc/$file; then
     # test -f appears to succeed for a symlink
     if test -L ../${tempdir}/etc/$file; then
       rm ../${tempdir}/etc/$file
       cp $file ../${tempdir}/etc
       chmod a-w ../${tempdir}/etc/$file
     fi
   else
     rm ../${tempdir}/etc/$file
     cp $file ../${tempdir}/etc
     chmod a-w ../${tempdir}/etc/$file
   fi
 done
 cd ../${tempdir}/etc
 rm -f fns*.el
 rm -f DOC* *~ \#*\# *.dvi *.log *.orig *.rej *,v =* core
 rm -f TAGS)

echo "Making links to \`etc/e'"
(cd etc/e
 ln `ls -d * | grep -v 'RCS'` ../../${tempdir}/etc/e
 cd ../../${tempdir}/etc/e
 rm -f *~ \#*\# *,v =* core)

echo "Making links to \`info'"
# Don't distribute backups or autosaves.
(cd info
 ln [a-zA-Z]* ../${tempdir}/info
 cd ../${tempdir}/info
 # Avoid an error when expanding the wildcards later.
 ln emacs dummy~ ; ln emacs \#dummy\#
 rm -f *~ \#*\# core)

echo "Making links to \`man'"
(cd man
 ln *.texi *.aux *.cps *.fns *.kys *.vrs ../${tempdir}/man
 test -f README && ln README ../${tempdir}/man
 test -f Makefile.in && ln Makefile.in ../${tempdir}/man
 ln ChangeLog split-man ../${tempdir}/man
 cp texinfo.tex ../${tempdir}/man
 cd ../${tempdir}/man
 rm -f \#*\# =* *~ core emacs-index* *.Z *.z xmail
 rm -f emacs.?? termcap.?? gdb.?? *.log *.toc *.dvi *.oaux)

echo "Making links to \`vms'"
(cd vms
 ln [0-9a-zA-Z]* ../${tempdir}/vms
 cd ../${tempdir}/vms
 rm -f *~)

### It would be nice if they could all be symlinks to etc's copy, but
### you're not supposed to have any symlinks in distribution tar files.
echo "Making sure copying notices are all copies of \`etc/COPYING'"
rm -f ${tempdir}/etc/COPYING
cp etc/COPYING ${tempdir}/etc/COPYING
for subdir in lisp src lib-src info msdos; do
  if [ -f ${tempdir}/${subdir}/COPYING ]; then
    rm ${tempdir}/${subdir}/COPYING
  fi
  cp etc/COPYING ${tempdir}/${subdir}
done

#### Make sure that there aren't any hard links between files in the
#### distribution; people with afs can't deal with that.  Okay,
#### actually we just re-copy anything with a link count greater
#### than two.  (Yes, strictly greater than 2 is correct; since we
#### created these files by linking them in from the original tree,
#### they'll have exactly two links normally.)
####
#### Commented out since it's not strictly necessary; it should suffice
#### to just break the link on alloca.c.
#echo "Breaking intra-tree links."
#find ${tempdir} ! -type d -links +2 \
#  -exec cp -p {} $$ \; -exec rm -f {} \; -exec mv $$ {} \;
rm -f $tempdir/lib-src/alloca.c
cp $tempdir/src/alloca.c $tempdir/lib-src/alloca.c

if [ "${newer}" ]; then
  echo "Removing files older than $newer"
  ## We remove .elc files unconditionally, on the theory that anyone picking
  ## up an incremental distribution already has a running Emacs to byte-compile
  ## them with.
  find ${tempparent} \( -name '*.elc' -o ! -newer ${newer} \) -exec rm -f {} \;
fi

if [ "${make_tar}" = yes ]; then
  if [ "${default_gzip}" = "" ]; then
    echo "Looking for gzip"
    temppath=`echo $PATH | sed 's/^:/.:/
				s/::/:.:/g
				s/:$/:./
				s/:/ /g'`
    default_gzip=`(
      for dir in ${temppath}; do
	if [ -f ${dir}/gzip ]; then echo 'gzip --best'; exit 0; fi
      done
      echo compress
    )`
  fi
  case "${default_gzip}" in
    compress* ) gzip_extension=.Z ;;
    * )         gzip_extension=.gz ;;
  esac
  echo "Creating tar files"
  (cd ${tempparent} ; tar cvf - ${emacsname} ) \
    | ${default_gzip} \
    > ${emacsname}.tar${gzip_extension}
  (cd ${tempparent}/${emacsname}-leim ; tar cvf - ${emacsname} ) \
    | ${default_gzip} \
    > ${emacsname}-leim.tar${gzip_extension}
fi

if [ "${clean_up}" = yes ]; then
  echo "Cleaning up the staging directory"
  rm -rf ${tempparent}
else
  (cd ${tempparent}; mv ${emacsname} ${emacsname}-leim ..)
  rm -rf ${tempparent}
fi

### make-dist ends here