Mercurial > emacs
annotate configure.in @ 9528:db02bc274f20
(Fx_create_frame): Init the FRAME_X_SCREEN as soon as can be done.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 14 Oct 1994 05:18:22 +0000 |
parents | bf899f54d530 |
children | 12b4d106cc47 |
rev | line source |
---|---|
8636 | 1 dnl This is an autoconf script. |
2 dnl To rebuild the `configure' script from this, execute the command | |
3 dnl autoconf | |
4 dnl in the directory containing this script. | |
8707 | 5 AC_PREREQ(1.111)dnl |
8636 | 6 AC_INIT(src/lisp.h) |
7 AC_CONFIG_HEADER(src/config.h) | |
8 | |
9 bindir='${exec_prefix}/bin' | |
10 datadir='${prefix}/lib' | |
11 statedir='${prefix}/lib' | |
12 libdir='${exec_prefix}/lib' | |
13 mandir='${prefix}/man/man1' | |
14 infodir='${prefix}/info' | |
15 lispdir='${datadir}/emacs/${version}/lisp' | |
16 locallisppath='${datadir}/emacs/site-lisp' | |
17 lisppath='${locallisppath}:${lispdir}' | |
18 etcdir='${datadir}/emacs/${version}/etc' | |
19 lockdir='${statedir}/emacs/lock' | |
20 archlibdir='${libdir}/emacs/${version}/${configuration}' | |
21 docdir='${datadir}/emacs/${version}/etc' | |
22 | |
8714
a52d8873fbdf
rearrange AC_ARG_WITH calls
David J. MacKenzie <djm@gnu.org>
parents:
8708
diff
changeset
|
23 AC_ARG_WITH(gcc, |
a52d8873fbdf
rearrange AC_ARG_WITH calls
David J. MacKenzie <djm@gnu.org>
parents:
8708
diff
changeset
|
24 [ --with-gcc Use GCC to compile Emacs]) |
8636 | 25 AC_ARG_WITH(x-toolkit, |
26 [ --with-x-toolkit=KIT Use an X toolkit (KIT = lucid or athena)], | |
27 [ case "${withval}" in | |
28 y | ye | yes ) val=athena ;; | |
29 n | no ) val=no ;; | |
30 l | lu | luc | luci | lucid ) val=lucid ;; | |
31 a | at | ath | athe | athena ) val=athena ;; | |
8674
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
32 dnl These don't currently work. |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
33 dnl m | mo | mot | moti | motif ) val=motif ;; |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
34 dnl o | op | ope | open | open- | open-l | open-lo \ |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
35 dnl | open-loo | open-look ) val=open-look ;; |
8636 | 36 * ) |
8674
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
37 dnl AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
38 dnl which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.]) |
8636 | 39 AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value |
40 which is \`yes', \`no', \`lucid', or \`athena'. | |
41 Currently, \`yes', \`athena' and \`lucid' are synonyms.]) | |
42 ;; | |
43 esac | |
44 with_x_toolkit=$val | |
45 ]) | |
8674
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
46 dnl AC_ARG_ENABLE(single-tree, |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
47 dnl [ --enable-single-tree Create a directory tree at DIR which looks like: |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
48 dnl .../DIR/bin/CONFIGNAME (emacs, etags, etc.) |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
49 dnl .../DIR/bin/CONFIGNAME/etc (movemail, etc.) |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
50 dnl .../DIR/common/lisp (emacs' lisp files) |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
51 dnl .../DIR/common/site-lisp (local lisp files) |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
52 dnl .../DIR/common/lib (DOC, TUTORIAL, etc.) |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
53 dnl .../DIR/common/lock (lockfiles)]) |
8636 | 54 |
55 #### Make srcdir absolute, if it isn't already. It's important to | |
56 #### avoid running the path through pwd unnecessary, since pwd can | |
8729 | 57 #### give you automounter prefixes, which can go away. We do all this |
58 #### so Emacs can find its files when run uninstalled. | |
8636 | 59 case "${srcdir}" in |
60 /* ) ;; | |
61 . ) | |
62 ## We may be able to use the $PWD environment variable to make this | |
63 ## absolute. But sometimes PWD is inaccurate. | |
64 if test "${PWD}" != "" && test "`(cd ${PWD} ; sh -c pwd)`" = "`pwd`" ; | |
65 then | |
66 srcdir="$PWD" | |
67 else | |
68 srcdir="`(cd ${srcdir}; pwd)`" | |
69 fi | |
70 ;; | |
71 * ) srcdir="`(cd ${srcdir}; pwd)`" ;; | |
72 esac | |
73 | |
74 #### Check if the source directory already has a configured system in it. | |
75 if test `pwd` != `(cd ${srcdir} && pwd)` \ | |
76 && test -f "${srcdir}/src/config.h" ; then | |
77 AC_MSG_WARN([The directory tree \`${srcdir}' is being used | |
78 as a build directory right now; it has been configured in its own | |
79 right. To configure in another directory as well, you MUST | |
80 use GNU make. If you do not have GNU make, then you must | |
81 now do \`make distclean' in ${srcdir}, | |
82 and then run $0 again.]) | |
83 | |
84 extrasub='/^VPATH[ ]*=/c\ | |
85 vpath %.c $(srcdir)\ | |
86 vpath %.h $(srcdir)\ | |
87 vpath %.y $(srcdir)\ | |
88 vpath %.l $(srcdir)\ | |
89 vpath %.s $(srcdir)\ | |
90 vpath %.in $(srcdir)' | |
91 fi | |
92 | |
93 #### Given the configuration name, set machfile and opsysfile to the | |
94 #### names of the m/*.h and s/*.h files we should use. | |
95 | |
96 ### Canonicalize the configuration name. | |
97 | |
98 AC_CANONICAL_HOST | |
99 canonical=$host | |
8680 | 100 configuration=$host_alias |
8636 | 101 |
102 changequote(, )dnl | |
103 | |
104 ### If you add support for a new configuration, add code to this | |
105 ### switch statement to recognize your configuration name and select | |
106 ### the appropriate operating system and machine description files. | |
107 | |
108 ### You would hope that you could choose an m/*.h file pretty much | |
109 ### based on the machine portion of the configuration name, and an s- | |
110 ### file based on the operating system portion. However, it turns out | |
111 ### that each m/*.h file is pretty manufacturer-specific - for | |
112 ### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are | |
113 ### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS | |
114 ### machines. So we basically have to have a special case for each | |
115 ### configuration name. | |
116 ### | |
117 ### As far as handling version numbers on operating systems is | |
118 ### concerned, make sure things will fail in a fixable way. If | |
119 ### /etc/MACHINES doesn't say anything about version numbers, be | |
120 ### prepared to handle anything reasonably. If version numbers | |
121 ### matter, be sure /etc/MACHINES says something about it. | |
122 ### | |
123 ### Eric Raymond says we should accept strings like "sysvr4" to mean | |
124 ### "System V Release 4"; he writes, "The old convention encouraged | |
125 ### confusion between `system' and `release' levels'." | |
126 | |
127 machine='' opsys='' unported=no | |
128 case "${canonical}" in | |
129 | |
130 ## NetBSD ports | |
131 *-*-netbsd* ) | |
132 opsys=netbsd | |
133 case "${canonical}" in | |
134 i[345]86-*-netbsd*) machine=intel386 ;; | |
135 m68k-*-netbsd*) | |
136 # This is somewhat bogus. | |
137 machine=hp9000s300 ;; | |
138 mips-*-netbsd*) machine=pmax ;; | |
139 ns32k-*-netbsd*) machine=ns32000 ;; | |
140 sparc-*-netbsd*) machine=sparc ;; | |
141 esac | |
142 ;; | |
143 | |
144 ## Alliant machines | |
145 ## Strictly speaking, we need the version of the alliant operating | |
146 ## system to choose the right machine file, but currently the | |
147 ## configuration name doesn't tell us enough to choose the right | |
148 ## one; we need to give alliants their own operating system name to | |
149 ## do this right. When someone cares, they can help us. | |
150 fx80-alliant-* ) | |
151 machine=alliant4 opsys=bsd4-2 | |
152 ;; | |
153 i860-alliant-* ) | |
154 machine=alliant-2800 opsys=bsd4-3 | |
155 ;; | |
156 | |
157 ## Altos 3068 | |
158 m68*-altos-sysv* ) | |
159 machine=altos opsys=usg5-2 | |
160 ;; | |
161 | |
162 ## Amdahl UTS | |
163 580-amdahl-sysv* ) | |
164 machine=amdahl opsys=usg5-2-2 | |
165 ;; | |
166 | |
167 ## Appallings - I mean, Apollos - running Domain | |
168 m68*-apollo* ) | |
169 machine=apollo opsys=bsd4-2 | |
170 ;; | |
171 | |
172 ## AT&T 3b2, 3b5, 3b15, 3b20 | |
173 we32k-att-sysv* ) | |
174 machine=att3b opsys=usg5-2-2 | |
175 ;; | |
176 | |
177 ## AT&T 3b1 - The Mighty Unix PC! | |
178 m68*-att-sysv* ) | |
179 machine=7300 opsys=usg5-2-2 | |
180 ;; | |
181 | |
182 ## Bull dpx20 | |
183 rs6000-bull-bosx* ) | |
184 machine=ibmrs6000 opsys=aix3-2 | |
185 ;; | |
186 | |
187 ## Bull dpx2 | |
188 m68*-bull-sysv3* ) | |
189 machine=dpx2 opsys=usg5-3 | |
190 ;; | |
191 | |
192 ## Bull sps7 | |
193 m68*-bull-sysv2* ) | |
194 machine=sps7 opsys=usg5-2 | |
195 ;; | |
196 | |
197 ## CCI 5/32, 6/32 -- see "Tahoe". | |
198 | |
199 ## Celerity | |
200 ## I don't know what configuration name to use for this; config.sub | |
201 ## doesn't seem to know anything about it. Hey, Celerity users, get | |
202 ## in touch with us! | |
203 celerity-celerity-bsd* ) | |
204 machine=celerity opsys=bsd4-2 | |
205 ;; | |
206 | |
207 ## Clipper | |
208 ## What operating systems does this chip run that Emacs has been | |
209 ## tested on? | |
210 clipper-* ) | |
211 machine=clipper | |
212 ## We'll use the catch-all code at the bottom to guess the | |
213 ## operating system. | |
214 ;; | |
215 | |
216 ## Convex | |
217 *-convex-bsd* | *-convex-convexos* ) | |
218 machine=convex opsys=bsd4-3 | |
219 ## Prevents suprious white space in makefiles - d.m.cooke@larc.nasa.gov | |
220 NON_GNU_CPP="cc -E -P" | |
221 ;; | |
222 | |
223 ## Cubix QBx/386 | |
224 i[345]86-cubix-sysv* ) | |
225 machine=intel386 opsys=usg5-3 | |
226 ;; | |
227 | |
228 ## Cydra 5 | |
229 cydra*-cydrome-sysv* ) | |
230 machine=cydra5 opsys=usg5-3 | |
231 ;; | |
232 | |
233 ## Data General AViiON Machines | |
234 m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* ) | |
235 machine=aviion opsys=dgux5-4r3 | |
236 ;; | |
237 m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* ) | |
238 machine=aviion opsys=dgux5-4r2 | |
239 ;; | |
240 m88k-dg-dgux* ) | |
241 machine=aviion opsys=dgux | |
242 ;; | |
243 | |
244 ## DECstations | |
245 mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* ) | |
246 machine=pmax opsys=bsd4-2 | |
247 ;; | |
248 mips-dec-ultrix* | mips-dec-bsd* ) | |
249 machine=pmax opsys=bsd4-3 | |
250 ;; | |
251 mips-dec-osf* ) | |
252 machine=pmax opsys=osf1 | |
253 ;; | |
254 | |
255 ## Motorola Delta machines | |
256 m68k-motorola-sysv* | m68000-motorola-sysv* ) | |
257 machine=delta opsys=usg5-3 | |
258 if test -z "`type gnucc | grep 'not found'`" | |
259 then CC=gnucc | |
260 else | |
261 if test -z "`type gcc | grep 'not found'`" | |
262 then CC=gcc | |
263 else CC=cc | |
264 fi | |
265 fi | |
266 ;; | |
267 m88k-motorola-sysv4* ) | |
268 machine=delta88k opsys=usg5-4 | |
269 ;; | |
270 m88k-motorola-sysv* | m88k-motorola-m88kbcs* ) | |
271 machine=delta88k opsys=usg5-3 | |
272 ;; | |
273 | |
274 ## Dual machines | |
275 m68*-dual-sysv* ) | |
276 machine=dual opsys=usg5-2 | |
277 ;; | |
278 m68*-dual-uniplus* ) | |
279 machine=dual opsys=unipl5-2 | |
280 ;; | |
281 | |
282 ## Elxsi 6400 | |
283 elxsi-elxsi-sysv* ) | |
284 machine=elxsi opsys=usg5-2 | |
285 ;; | |
286 | |
287 ## Encore machines | |
288 ns16k-encore-bsd* ) | |
289 machine=ns16000 opsys=umax | |
290 ;; | |
291 | |
292 ## The GEC 93 - apparently, this port isn't really finished yet. | |
293 | |
294 ## Gould Power Node and NP1 | |
295 pn-gould-bsd4.2* ) | |
296 machine=gould opsys=bsd4-2 | |
297 ;; | |
298 pn-gould-bsd4.3* ) | |
299 machine=gould opsys=bsd4-3 | |
300 ;; | |
301 np1-gould-bsd* ) | |
302 machine=gould-np1 opsys=bsd4-3 | |
303 ;; | |
304 | |
305 ## Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000 | |
306 ## as far as Emacs is concerned). | |
307 m88k-harris-cxux* ) | |
308 # Build needs to be different on 7.0 and later releases | |
309 case "`uname -r`" in | |
310 [56].[0-9] ) machine=nh4000 opsys=cxux ;; | |
311 [7].[0-9] ) machine=nh4000 opsys=cxux7 ;; | |
312 esac | |
313 ;; | |
314 ## Harris ecx or gcx running CX/UX (Series 1200, Series 3000) | |
315 m68k-harris-cxux* ) | |
316 machine=nh3000 opsys=cxux | |
317 ;; | |
318 | |
319 ## Honeywell XPS100 | |
320 xps*-honeywell-sysv* ) | |
321 machine=xps100 opsys=usg5-2 | |
322 ;; | |
323 | |
324 ## HP 9000 series 200 or 300 | |
325 m68*-hp-bsd* ) | |
326 machine=hp9000s300 opsys=bsd4-3 | |
327 ;; | |
328 ## HP/UX 7, 8 and 9 are supported on these machines. | |
329 m68*-hp-hpux* ) | |
330 case "`uname -r`" in | |
331 ## Someone's system reports A.B8.05 for this. | |
332 ## I wonder what other possibilities there are. | |
333 *.B8.* ) machine=hp9000s300 opsys=hpux8 ;; | |
334 *.08.* ) machine=hp9000s300 opsys=hpux8 ;; | |
335 *.09.* ) machine=hp9000s300 opsys=hpux9 ;; | |
336 *) machine=hp9000s300 opsys=hpux ;; | |
337 esac | |
338 ;; | |
339 | |
340 ## HP 9000 series 700 and 800, running HP/UX | |
341 hppa*-hp-hpux7* ) | |
342 machine=hp800 opsys=hpux | |
343 ;; | |
344 hppa*-hp-hpux8* ) | |
345 machine=hp800 opsys=hpux8 | |
346 ;; | |
347 hppa*-hp-hpux9shr* ) | |
348 machine=hp800 opsys=hpux9shr | |
349 ;; | |
350 hppa*-hp-hpux9* ) | |
351 machine=hp800 opsys=hpux9 | |
352 ;; | |
353 | |
354 ## HP 9000 series 700 and 800, running HP/UX | |
355 hppa*-hp-hpux* ) | |
356 ## Cross-compilation? Nah! | |
357 case "`uname -r`" in | |
358 ## Someone's system reports A.B8.05 for this. | |
359 ## I wonder what other possibilities there are. | |
360 *.B8.* ) machine=hp800 opsys=hpux8 ;; | |
361 *.08.* ) machine=hp800 opsys=hpux8 ;; | |
362 *.09.* ) machine=hp800 opsys=hpux9 ;; | |
363 *) machine=hp800 opsys=hpux ;; | |
364 esac | |
365 ;; | |
366 | |
367 ## Orion machines | |
368 orion-orion-bsd* ) | |
369 machine=orion opsys=bsd4-2 | |
370 ;; | |
371 clipper-orion-bsd* ) | |
372 machine=orion105 opsys=bsd4-2 | |
373 ;; | |
374 | |
375 ## IBM machines | |
376 i[345]86-ibm-aix1.1* ) | |
377 machine=ibmps2-aix opsys=usg5-2-2 | |
378 ;; | |
379 i[345]86-ibm-aix1.[23]* | i[345]86-ibm-aix* ) | |
380 machine=ibmps2-aix opsys=usg5-3 | |
381 ;; | |
382 i370-ibm-aix*) | |
383 machine=ibm370aix opsys=usg5-3 | |
384 ;; | |
8708
6fef8c63f200
keep up to date with configure.in
David J. MacKenzie <djm@gnu.org>
parents:
8707
diff
changeset
|
385 rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1* ) |
8636 | 386 machine=ibmrs6000 opsys=aix3-1 |
387 ;; | |
8708
6fef8c63f200
keep up to date with configure.in
David J. MacKenzie <djm@gnu.org>
parents:
8707
diff
changeset
|
388 rs6000-ibm-aix3.2.5 | powerpc-ibm-aix3.2.5 ) |
8636 | 389 machine=ibmrs6000 opsys=aix3-2-5 |
390 ;; | |
8708
6fef8c63f200
keep up to date with configure.in
David J. MacKenzie <djm@gnu.org>
parents:
8707
diff
changeset
|
391 rs6000-ibm-aix* | powerpc-ibm-aix* ) |
8636 | 392 machine=ibmrs6000 opsys=aix3-2 |
393 ;; | |
394 romp-ibm-bsd4.3* ) | |
395 machine=ibmrt opsys=bsd4-3 | |
396 ;; | |
397 romp-ibm-bsd4.2* ) | |
398 machine=ibmrt opsys=bsd4-2 | |
399 ;; | |
400 romp-ibm-aos4.3* ) | |
401 machine=ibmrt opsys=bsd4-3 | |
402 ;; | |
403 romp-ibm-aos4.2* ) | |
404 machine=ibmrt opsys=bsd4-2 | |
405 ;; | |
406 romp-ibm-aos* ) | |
407 machine=ibmrt opsys=bsd4-3 | |
408 ;; | |
409 romp-ibm-bsd* ) | |
410 machine=ibmrt opsys=bsd4-3 | |
411 ;; | |
412 romp-ibm-aix* ) | |
413 machine=ibmrt-aix opsys=usg5-2-2 | |
414 ;; | |
415 | |
416 ## Integrated Solutions `Optimum V' | |
417 m68*-isi-bsd4.2* ) | |
418 machine=isi-ov opsys=bsd4-2 | |
419 ;; | |
420 m68*-isi-bsd4.3* ) | |
421 machine=isi-ov opsys=bsd4-3 | |
422 ;; | |
423 | |
424 ## Intel 386 machines where we do care about the manufacturer | |
425 i[345]86-intsys-sysv* ) | |
426 machine=is386 opsys=usg5-2-2 | |
427 ;; | |
428 | |
429 ## Prime EXL | |
430 i[345]86-prime-sysv* ) | |
431 machine=i386 opsys=usg5-3 | |
432 ;; | |
433 | |
434 ## Sequent Symmetry | |
435 i[345]86-sequent-bsd* ) | |
436 machine=symmetry opsys=bsd4-3 | |
437 ;; | |
438 | |
439 ## Unspecified sysv on an ncr machine defaults to svr4.2. | |
440 ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.) | |
441 i[345]86-ncr-sysv* ) | |
442 machine=intel386 opsys=usg5-4-2 | |
443 ;; | |
444 | |
445 ## Intel 860 | |
446 i860-*-sysv4* ) | |
447 machine=i860 opsys=usg5-4 | |
448 NON_GNU_CC="/bin/cc" # Ie, not the one in /usr/ucb/cc. | |
449 NON_GNU_CPP="/usr/ccs/lib/cpp" # cc -E tokenizes macro expansion. | |
450 ;; | |
451 | |
452 ## Masscomp machines | |
453 m68*-masscomp-rtu* ) | |
454 machine=masscomp opsys=rtu | |
455 ;; | |
456 | |
457 ## Megatest machines | |
458 m68*-megatest-bsd* ) | |
459 machine=mega68 opsys=bsd4-2 | |
460 ;; | |
461 | |
462 ## Workstations sold by MIPS | |
463 ## This is not necessarily all workstations using the MIPS processor - | |
464 ## Irises are produced by SGI, and DECstations by DEC. | |
465 | |
466 ## etc/MACHINES lists mips.h and mips4.h as possible machine files, | |
467 ## and usg5-2-2 and bsd4-3 as possible OS files. The only guidance | |
468 ## it gives for choosing between the alternatives seems to be "Use | |
469 ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with | |
470 ## the BSD world." I'll assume that these are instructions for | |
471 ## handling two odd situations, and that every other situation | |
472 ## should use mips.h and usg5-2-2, they being listed first. | |
473 mips-mips-usg* ) | |
474 machine=mips4 | |
475 ## Fall through to the general code at the bottom to decide on the OS. | |
476 ;; | |
477 mips-mips-riscos4* ) | |
478 machine=mips4 opsys=bsd4-3 | |
479 NON_GNU_CC="cc -systype bsd43" | |
480 NON_GNU_CPP="cc -systype bsd43 -E" | |
481 ;; | |
482 mips-mips-bsd* ) | |
483 machine=mips opsys=bsd4-3 | |
484 ;; | |
485 mips-mips-* ) | |
486 machine=mips opsys=usg5-2-2 | |
487 ;; | |
488 | |
489 ## NeXT | |
490 m68*-next-* | i[345]86-next-* ) | |
491 machine=next opsys=mach2 | |
492 ;; | |
493 | |
494 ## The complete machine from National Semiconductor | |
495 ns32k-ns-genix* ) | |
496 machine=ns32000 opsys=usg5-2 | |
497 ;; | |
498 | |
499 ## NCR machines | |
500 m68*-ncr-sysv2* | m68*-ncr-sysvr2* ) | |
501 machine=tower32 opsys=usg5-2-2 | |
502 ;; | |
503 m68*-ncr-sysv3* | m68*-ncr-sysvr3* ) | |
504 machine=tower32v3 opsys=usg5-3 | |
505 ;; | |
506 | |
507 ## Nixdorf Targon 31 | |
508 m68*-nixdorf-sysv* ) | |
509 machine=targon31 opsys=usg5-2-2 | |
510 ;; | |
511 | |
512 ## Nu (TI or LMI) | |
513 m68*-nu-sysv* ) | |
514 machine=nu opsys=usg5-2 | |
515 ;; | |
516 | |
517 ## Plexus | |
518 m68*-plexus-sysv* ) | |
519 machine=plexus opsys=usg5-2 | |
520 ;; | |
521 | |
522 ## Pyramid machines | |
523 ## I don't really have any idea what sort of processor the Pyramid has, | |
524 ## so I'm assuming it is its own architecture. | |
525 pyramid-pyramid-bsd* ) | |
526 machine=pyramid opsys=bsd4-2 | |
527 ;; | |
528 | |
529 ## Sequent Balance | |
530 ns32k-sequent-bsd4.2* ) | |
531 machine=sequent opsys=bsd4-2 | |
532 ;; | |
533 ns32k-sequent-bsd4.3* ) | |
534 machine=sequent opsys=bsd4-3 | |
535 ;; | |
536 | |
537 ## Siemens Nixdorf | |
538 mips-siemens-sysv* ) | |
539 machine=mips-siemens opsys=usg5-4 | |
540 NON_GNU_CC=/usr/ccs/bin/cc | |
541 NON_GNU_CPP=/usr/ccs/lib/cpp | |
542 ;; | |
543 | |
544 ## Silicon Graphics machines | |
545 ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030) | |
546 m68*-sgi-iris3.5* ) | |
547 machine=irist opsys=iris3-5 | |
548 ;; | |
549 m68*-sgi-iris3.6* | m68*-sgi-iris*) | |
550 machine=irist opsys=iris3-6 | |
551 ;; | |
552 ## Iris 4D | |
553 mips-sgi-irix3* ) | |
554 machine=iris4d opsys=irix3-3 | |
555 ;; | |
556 mips-sgi-irix5* ) | |
557 machine=iris4d opsys=irix5-0 | |
558 ;; | |
559 mips-sgi-irix4* | mips-sgi-irix* ) | |
560 machine=iris4d opsys=irix4-0 | |
561 ;; | |
562 | |
563 ## SONY machines | |
564 m68*-sony-bsd4.2* ) | |
565 machine=news opsys=bsd4-2 | |
566 ;; | |
567 m68*-sony-bsd4.3* ) | |
568 machine=news opsys=bsd4-3 | |
569 ;; | |
570 m68*-sony-newsos3*) | |
571 machine=news opsys=bsd4-3 | |
572 ;; | |
573 mips-sony-bsd* | mips-sony-newsos4* ) | |
574 machine=news-risc opsys=bsd4-3 | |
575 ;; | |
576 mips-sony-newsos* ) | |
577 machine=news-risc opsys=newsos5 | |
578 ;; | |
579 | |
580 ## Stride | |
581 m68*-stride-sysv* ) | |
582 machine=stride opsys=usg5-2 | |
583 ;; | |
584 | |
585 ## Suns | |
586 *-sun-sunos* | *-sun-bsd* | *-sun-solaris* | i[345]86-*-solaris2* | i[345]86-*-sunos5* ) | |
587 case "${canonical}" in | |
588 m68*-sunos1* ) machine=sun1 ;; | |
589 m68*-sunos2* ) machine=sun2 ;; | |
590 m68* ) machine=sun3 ;; | |
591 i[345]86-sun-sunos[34]* ) machine=sun386 ;; | |
592 i[345]86-*-* ) machine=intel386 ;; | |
593 sparc* ) machine=sparc ;; | |
594 * ) unported=yes ;; | |
595 esac | |
596 case "${canonical}" in | |
597 ## The Sun386 didn't get past 4.0. | |
598 i[345]86-*-sunos4 ) opsys=sunos4-0 ;; | |
599 *-sunos4.0* ) opsys=sunos4-0 ;; | |
600 *-sunos4.1.3* ) opsys=sunos4-1-3 | |
601 NON_GCC_TEST_OPTIONS=-Bstatic | |
602 GCC_TEST_OPTIONS=-static | |
603 ;; | |
604 *-sunos4shr* ) opsys=sunos4shr ;; | |
605 *-sunos4* | *-sunos ) opsys=sunos4-1 | |
606 NON_GCC_TEST_OPTIONS=-Bstatic | |
607 GCC_TEST_OPTIONS=-static | |
608 ;; | |
609 *-sunos5.3* | *-solaris2.3* ) | |
610 opsys=sol2-3 | |
611 NON_GNU_CPP=/usr/ccs/lib/cpp | |
612 ;; | |
613 *-sunos5.4* | *-solaris2.4* ) | |
614 opsys=sol2-4 | |
615 NON_GNU_CPP=/usr/ccs/lib/cpp | |
616 ;; | |
617 *-sunos5* | *-solaris* ) | |
618 opsys=sol2 | |
619 NON_GNU_CPP=/usr/ccs/lib/cpp | |
620 ;; | |
621 * ) opsys=bsd4-2 ;; | |
622 esac | |
623 ;; | |
624 | |
625 ## Tadpole 68k | |
626 m68*-tadpole-sysv* ) | |
627 machine=tad68k opsys=usg5-3 | |
628 ;; | |
629 | |
630 ## Tahoe machines | |
631 tahoe-tahoe-bsd4.2* ) | |
632 machine=tahoe opsys=bsd4-2 | |
633 ;; | |
634 tahoe-tahoe-bsd4.3* ) | |
635 machine=tahoe opsys=bsd4-3 | |
636 ;; | |
637 | |
638 ## Tandem Integrity S2 | |
639 mips-tandem-sysv* ) | |
640 machine=tandem-s2 opsys=usg5-3 | |
641 ;; | |
642 | |
643 ## Tektronix XD88 | |
644 m88k-tektronix-sysv3* ) | |
645 machine=tekxd88 opsys=usg5-3 | |
646 ;; | |
647 | |
648 ## Tektronix 16000 box (6130?) | |
649 ns16k-tektronix-bsd* ) | |
650 machine=ns16000 opsys=bsd4-2 | |
651 ;; | |
652 ## Tektronix 4300 | |
653 ## src/m/tek4300.h hints that this is a m68k machine. | |
654 m68*-tektronix-bsd* ) | |
655 machine=tek4300 opsys=bsd4-3 | |
656 ;; | |
657 | |
658 ## Titan P2 or P3 | |
659 ## We seem to have lost the machine-description file titan.h! | |
660 titan-titan-sysv* ) | |
661 machine=titan opsys=usg5-3 | |
662 ;; | |
663 | |
664 ## Ustation E30 (SS5E) | |
665 m68*-unisys-uniplus* ) | |
666 machine=ustation opsystem=unipl5-2 | |
667 ;; | |
668 | |
669 ## Vaxen. | |
670 vax-dec-* ) | |
671 machine=vax | |
672 case "${canonical}" in | |
673 *-bsd4.1* ) opsys=bsd4-1 ;; | |
674 *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* ) opsys=bsd4-2 ;; | |
675 *-bsd4.3* | *-ultrix* ) opsys=bsd4-3 ;; | |
676 *-bsd386* | *-bsdi* ) opsys=bsd386 ;; | |
677 *-sysv[01]* | *-sysvr[01]* ) opsys=usg5-0 ;; | |
678 *-sysv2* | *-sysvr2* ) opsys=usg5-2 ;; | |
679 *-vms* ) opsys=vms ;; | |
680 * ) unported=yes | |
681 esac | |
682 ;; | |
683 | |
684 ## Whitechapel MG1 | |
685 ns16k-whitechapel-* ) | |
686 machine=mg1 | |
687 ## We don't know what sort of OS runs on these; we'll let the | |
688 ## operating system guessing code below try. | |
689 ;; | |
690 | |
691 ## Wicat | |
692 m68*-wicat-sysv* ) | |
693 machine=wicat opsys=usg5-2 | |
694 ;; | |
695 | |
696 ## Intel 386 machines where we don't care about the manufacturer | |
697 i[345]86-*-* ) | |
698 machine=intel386 | |
699 case "${canonical}" in | |
700 *-isc1.* | *-isc2.[01]* ) opsys=386-ix ;; | |
701 *-isc2.2* ) opsys=isc2-2 ;; | |
702 *-isc4.0* ) opsys=isc4-0 ;; | |
703 *-isc* ) opsys=isc3-0 ;; | |
704 *-esix5* ) opsys=esix5r4; NON_GNU_CPP=/usr/lib/cpp ;; | |
705 *-esix* ) opsys=esix ;; | |
706 *-xenix* ) opsys=xenix ;; | |
707 *-linux* ) opsys=linux ;; | |
708 *-sco3.2v4* ) opsys=sco4 ; NON_GNU_CPP=/lib/cpp ;; | |
709 *-bsd386* | *-bsdi* ) opsys=bsd386 ;; | |
710 *-386bsd* ) opsys=386bsd ;; | |
711 *-freebsd* ) opsys=freebsd ;; | |
712 *-nextstep* ) opsys=mach2 ;; | |
713 ## Otherwise, we'll fall through to the generic opsys code at the bottom. | |
714 esac | |
715 ;; | |
716 | |
717 * ) | |
718 unported=yes | |
719 ;; | |
720 esac | |
721 | |
722 ### If the code above didn't choose an operating system, just choose | |
723 ### an operating system based on the configuration name. You really | |
724 ### only want to use this when you have no idea what the right | |
725 ### operating system is; if you know what operating systems a machine | |
726 ### runs, it's cleaner to make it explicit in the case statement | |
727 ### above. | |
728 if test x"${opsys}" = x; then | |
729 case "${canonical}" in | |
730 *-gnu* ) opsys=gnu ;; | |
731 *-bsd4.[01] ) opsys=bsd4-1 ;; | |
732 *-bsd4.2 ) opsys=bsd4-2 ;; | |
733 *-bsd4.3 ) opsys=bsd4-3 ;; | |
734 *-sysv0 | *-sysvr0 ) opsys=usg5-0 ;; | |
735 *-sysv2 | *-sysvr2 ) opsys=usg5-2 ;; | |
736 *-sysv2.2 | *-sysvr2.2 ) opsys=usg5-2-2 ;; | |
737 *-sysv3 | *-sysvr3 ) opsys=usg5-3 ;; | |
738 *-sysv4 | *-sysvr4 ) opsys=usg5-4 ;; | |
739 *-sysv4.1 | *-sysvr4.1 ) | |
740 NON_GNU_CPP=/usr/lib/cpp | |
741 opsys=usg5-4 ;; | |
742 *-sysv4.2 | *-sysvr4.2 ) opsys=usg5-4-2 ;; | |
743 * ) | |
744 unported=yes | |
745 ;; | |
746 esac | |
747 fi | |
748 | |
749 changequote([, ])dnl | |
750 | |
751 if test $unported = yes; then | |
752 AC_MSG_ERROR([Emacs hasn't been ported to \`${canonical}' systems. | |
753 Check \`etc/MACHINES' for recognized configuration names.]) | |
754 fi | |
755 | |
756 machfile="m/${machine}.h" | |
757 opsysfile="s/${opsys}.h" | |
758 | |
759 | |
760 #### Choose a compiler. | |
761 test -n "$CC" && cc_specified=yes | |
762 | |
763 case ${with_gcc} in | |
764 "yes" ) CC="gcc" GCC=yes ;; | |
8730 | 765 "no" ) : ${CC=cc} ;; |
8636 | 766 * ) AC_PROG_CC |
767 esac | |
768 | |
769 # On Suns, sometimes $CPP names a directory. | |
770 if test -n "$CPP" && test -d "$CPP"; then | |
771 CPP= | |
772 fi | |
773 | |
774 #### Some systems specify a CPP to use unless we are using GCC. | |
775 #### Now that we know whether we are using GCC, we can decide whether | |
776 #### to use that one. | |
777 if test "x$NON_GNU_CPP" != x && test x$GCC != xyes && test "x$CPP" = x | |
778 then | |
779 CPP="$NON_GNU_CPP" | |
780 fi | |
781 | |
782 #### Some systems specify a CC to use unless we are using GCC. | |
783 #### Now that we know whether we are using GCC, we can decide whether | |
784 #### to use that one. | |
785 if test "x$NON_GNU_CC" != x && test x$GCC != xyes && | |
786 test x$cc_specified != xyes | |
787 then | |
788 CC="$NON_GNU_CC" | |
789 fi | |
790 | |
791 if test x$GCC = xyes && test "x$GCC_TEST_OPTIONS" != x | |
792 then | |
793 CC="$CC $GCC_TEST_OPTIONS" | |
794 fi | |
795 | |
796 if test x$GCC = x && test "x$NON_GCC_TEST_OPTIONS" != x | |
797 then | |
798 CC="$CC $NON_GCC_TEST_OPTIONS" | |
799 fi | |
800 | |
801 #### Some other nice autoconf tests. If you add a test here which | |
802 #### should make an entry in src/config.h, don't forget to add an | |
803 #### #undef clause to src/config.h.in for autoconf to modify. | |
804 | |
805 dnl checks for programs | |
8730 | 806 AC_PROG_LN_S |
8636 | 807 AC_PROG_CPP |
808 AC_PROG_INSTALL | |
809 AC_PROG_YACC | |
810 | |
811 dnl checks for header files | |
8730 | 812 AC_CHECK_HEADERS(sys/timeb.h sys/time.h unistd.h) |
813 AC_HEADER_STDC | |
814 AC_HEADER_TIME | |
815 AC_DECL_SYS_SIGLIST | |
8636 | 816 |
817 dnl checks for typedefs | |
8730 | 818 AC_TYPE_SIGNAL |
8636 | 819 |
820 dnl checks for structure members | |
821 AC_STRUCT_TM | |
8730 | 822 AC_STRUCT_TIMEZONE |
8636 | 823 |
824 dnl checks for compiler characteristics | |
8730 | 825 AC_C_CONST |
8636 | 826 |
827 dnl check for Make feature | |
8730 | 828 AC_PROG_MAKE_SET |
8636 | 829 |
830 dnl checks for operating system services | |
8730 | 831 AC_SYS_LONG_FILE_NAMES |
8636 | 832 |
833 #### Choose a window system. | |
834 | |
8730 | 835 AC_PATH_X |
8707 | 836 if test "$no_x" = yes; then |
837 window_system=none | |
838 else | |
839 window_system=x11 | |
840 fi | |
8636 | 841 |
842 test "${x_libraries}" != NONE && LD_SWITCH_X_SITE="-L${x_libraries}" | |
843 test "${x_libraries}" != NONE && LD_SWITCH_X_SITE_AUX="-R${x_libraries}" | |
844 test "${x_includes}" != NONE && C_SWITCH_X_SITE="-I${x_includes}" | |
845 | |
846 case "${window_system}" in | |
847 x11 ) | |
848 HAVE_X_WINDOWS=yes | |
849 HAVE_X11=yes | |
850 case "${with_x_toolkit}" in | |
851 athena | lucid ) USE_X_TOOLKIT=LUCID ;; | |
8674
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
852 dnl motif ) USE_X_TOOLKIT=MOTIF ;; |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
853 dnl open-look ) USE_X_TOOLKIT=OPEN_LOOK ;; |
8636 | 854 * ) USE_X_TOOLKIT=none ;; |
855 esac | |
856 ;; | |
857 none ) | |
858 HAVE_X_WINDOWS=no | |
859 HAVE_X11=no | |
860 USE_X_TOOLKIT=none | |
861 ;; | |
862 esac | |
863 X_TOOLKIT_TYPE=$USE_X_TOOLKIT | |
864 | |
865 ### If we're using X11, we should use the X menu package. | |
866 HAVE_X_MENU=no | |
867 case ${HAVE_X11} in | |
868 yes ) HAVE_X_MENU=yes ;; | |
869 esac | |
870 | |
871 #### Extract some information from the operating system and machine files. | |
872 | |
873 AC_CHECKING([the machine- and system-dependent files to find out | |
874 - which libraries the lib-src programs will want, and | |
875 - whether the GNU malloc routines are usable]) | |
876 | |
877 ### First figure out CFLAGS (which we use for running the compiler here) | |
878 ### and REAL_CFLAGS (which we use for real compilation). | |
879 ### The two are the same except on a few systems, where they are made | |
880 ### different to work around various lossages. For example, | |
881 ### GCC 2.5 on Linux needs them to be different because it treats -g | |
882 ### as implying static linking. | |
883 | |
884 ### If the CFLAGS env var is specified, we use that value | |
885 ### instead of the default. | |
886 | |
887 ### It's not important that this name contain the PID; you can't run | |
888 ### two configures in the same directory and have anything work | |
889 ### anyway. | |
890 tempcname="conftest.c" | |
891 | |
892 echo ' | |
893 #include "'${srcdir}'/src/'${opsysfile}'" | |
894 #include "'${srcdir}'/src/'${machfile}'" | |
895 #ifndef LIBS_MACHINE | |
896 #define LIBS_MACHINE | |
897 #endif | |
898 #ifndef LIBS_SYSTEM | |
899 #define LIBS_SYSTEM | |
900 #endif | |
901 #ifndef C_SWITCH_SYSTEM | |
902 #define C_SWITCH_SYSTEM | |
903 #endif | |
904 #ifndef C_SWITCH_MACHINE | |
905 #define C_SWITCH_MACHINE | |
906 #endif | |
907 configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM | |
908 configure___ c_switch_system=C_SWITCH_SYSTEM | |
909 configure___ c_switch_machine=C_SWITCH_MACHINE | |
910 | |
911 #ifndef LIB_X11_LIB | |
912 #define LIB_X11_LIB -lX11 | |
913 #endif | |
914 | |
915 #ifndef LIBX11_MACHINE | |
916 #define LIBX11_MACHINE | |
917 #endif | |
918 | |
919 #ifndef LIBX11_SYSTEM | |
920 #define LIBX11_SYSTEM | |
921 #endif | |
922 configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM | |
923 | |
924 #ifdef UNEXEC | |
925 configure___ unexec=UNEXEC | |
926 #else | |
927 configure___ unexec=unexec.o | |
928 #endif | |
929 | |
930 #ifdef SYSTEM_MALLOC | |
931 configure___ system_malloc=yes | |
932 #else | |
933 configure___ system_malloc=no | |
934 #endif | |
935 | |
936 #ifndef C_DEBUG_SWITCH | |
937 #define C_DEBUG_SWITCH -g | |
938 #endif | |
939 | |
940 #ifndef C_OPTIMIZE_SWITCH | |
941 #define C_OPTIMIZE_SWITCH -O | |
942 #endif | |
943 | |
944 #ifdef THIS_IS_CONFIGURE | |
945 | |
946 /* Get the CFLAGS for tests in configure. */ | |
947 #ifdef __GNUC__ | |
948 configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}' | |
949 #else | |
950 configure___ CFLAGS=C_DEBUG_SWITCH '${CFLAGS}' | |
951 #endif | |
952 | |
953 #else /* not THIS_IS_CONFIGURE */ | |
954 | |
955 /* Get the CFLAGS for real compilation. */ | |
956 #ifdef __GNUC__ | |
957 configure___ REAL_CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}' | |
958 #else | |
959 configure___ REAL_CFLAGS=C_DEBUG_SWITCH '${CFLAGS}' | |
960 #endif | |
961 | |
962 #endif /* not THIS_IS_CONFIGURE */ | |
963 ' > ${tempcname} | |
964 | |
965 # The value of CPP is a quoted variable reference, so we need to do this | |
966 # to get its actual value... | |
967 CPP=`eval "echo $CPP"` | |
968 changequote(, )dnl | |
969 eval `${CPP} -Isrc ${tempcname} \ | |
970 | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'` | |
971 if test "x$CFLAGS" = x; then | |
972 eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \ | |
973 | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'` | |
974 else | |
975 REAL_CFLAGS="$CFLAGS" | |
976 fi | |
977 changequote([, ])dnl | |
978 rm ${tempcname} | |
979 | |
980 ### Compute the unexec source name from the object name. | |
981 UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`" | |
982 | |
983 # Do the opsystem or machine files prohibit the use of the GNU malloc? | |
984 # Assume not, until told otherwise. | |
985 GNU_MALLOC=yes | |
986 if test "${system_malloc}" = "yes"; then | |
987 GNU_MALLOC=no | |
988 GNU_MALLOC_reason=" | |
989 (The GNU allocators don't work with this system configuration.)" | |
990 fi | |
991 | |
992 if test x"${REL_ALLOC}" = x; then | |
993 REL_ALLOC=${GNU_MALLOC} | |
994 fi | |
995 | |
996 LISP_FLOAT_TYPE=yes | |
997 | |
998 | |
999 #### Add the libraries to LIBS and check for some functions. | |
1000 | |
1001 CPPFLAGS="$c_switch_system $c_switch_machine $CPPFLAGS" | |
1002 LIBS="$libsrc_libs" | |
1003 | |
1004 dnl If found, this defines HAVE_LIBDNET, which m/pmax.h checks, | |
1005 dnl and also adds -ldnet to LIBS, which Autoconf uses for checks. | |
1006 AC_CHECK_LIB(dnet, dnet_ntoa) | |
1007 dnl This causes -lresolv to get used in subsequent tests, | |
1008 dnl which causes failures on some systems such as HPUX 9. | |
1009 dnl AC_CHECK_LIB(resolv, gethostbyname) | |
1010 | |
1011 dnl FIXME replace main with a function we actually want from this library. | |
1012 AC_CHECK_LIB(Xbsd, main, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd") | |
1013 | |
1014 AC_MSG_CHECKING(for XFree86) | |
1015 if test -d /usr/X386/include; then | |
1016 HAVE_XFREE386=yes | |
8730 | 1017 : ${C_SWITCH_X_SITE="-I/usr/X386/include"} |
8636 | 1018 else |
8730 | 1019 HAVE_XFREE386=no |
8636 | 1020 fi |
8730 | 1021 AC_MSG_RESULT($HAVE_XFREE386) |
8636 | 1022 |
1023 # We change CFLAGS temporarily so that C_SWITCH_X_SITE gets used | |
1024 # for the tests that follow. | |
1025 | |
1026 if test "${HAVE_X11}" = "yes"; then | |
1027 DEFS="$C_SWITCH_X_SITE $DEFS" | |
1028 LIBS="$LD_SWITCH_X_SITE $LIBX $LIBS" | |
1029 CFLAGS="$C_SWITCH_X_SITE $CFLAGS" | |
8730 | 1030 AC_CHECK_FUNCS(XrmSetDatabase XScreenResourceString \ |
8636 | 1031 XScreenNumberOfScreen XSetWMProtocols) |
1032 fi | |
1033 | |
1034 if test "${USE_X_TOOLKIT}" != "none"; then | |
1035 AC_MSG_CHECKING(X11 toolkit version) | |
8730 | 1036 AC_TRY_LINK([#include <X11/Intrinsic.h>], |
8636 | 1037 [#if XtSpecificationRelease < 6 |
1038 fail; | |
1039 #endif | |
1040 ], [AC_MSG_RESULT(6) | |
1041 AC_DEFINE(HAVE_X11XTR6)], | |
1042 [AC_MSG_RESULT(not 6)]) | |
1043 fi | |
1044 | |
1045 # If netdb.h doesn't declare h_errno, we must declare it by hand. | |
1046 AC_MSG_CHECKING(whether netdb declarares h_errno) | |
8730 | 1047 AC_TRY_LINK([#include <netdb.h>], |
8636 | 1048 [int |
1049 foo () | |
1050 { | |
1051 return h_errno; | |
1052 } | |
1053 ], [AC_MSG_RESULT(yes) | |
1054 AC_DEFINE(HAVE_H_ERRNO)], | |
1055 [AC_MSG_RESULT(no)]) | |
1056 | |
8730 | 1057 AC_FUNC_ALLOCA |
8636 | 1058 |
1059 # logb and frexp are found in -lm on most systems. | |
1060 AC_CHECK_LIB(m, logb) | |
8730 | 1061 AC_CHECK_FUNCS(gettimeofday gethostname dup2 rename closedir mkdir rmdir \ |
8708
6fef8c63f200
keep up to date with configure.in
David J. MacKenzie <djm@gnu.org>
parents:
8707
diff
changeset
|
1062 random lrand48 bcopy bcmp logb frexp fmod drem ftime res_init setsid strerror \ |
8636 | 1063 fpathconf) |
1064 | |
1065 ok_so_far=yes | |
8730 | 1066 AC_CHECK_FUNC(socket, , ok_so_far=no) |
8636 | 1067 if test $ok_so_far = yes; then |
8730 | 1068 AC_CHECK_HEADER(netinet/in.h, , ok_so_far=no) |
8636 | 1069 fi |
1070 if test $ok_so_far = yes; then | |
8730 | 1071 AC_CHECK_HEADER(arpa/inet.h, , ok_so_far=no) |
8636 | 1072 fi |
1073 if test $ok_so_far = yes; then | |
1074 AC_DEFINE(HAVE_INET_SOCKETS) | |
1075 fi | |
1076 | |
8680 | 1077 if test -f /usr/lpp/X11/bin/smt.exp; then |
1078 AC_DEFINE(HAVE_AIX_SMT_EXP) | |
1079 fi | |
1080 | |
8636 | 1081 # Set up the CFLAGS for real compilation, so we can substitute it. |
1082 CFLAGS="$REAL_CFLAGS" | |
1083 | |
1084 changequote(, )dnl | |
1085 #### Find out which version of Emacs this is. | |
1086 version=`grep 'defconst[ ]*emacs-version' ${srcdir}/lisp/version.el \ | |
1087 | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'` | |
1088 changequote([, ])dnl | |
1089 if test x"${version}" = x; then | |
1090 AC_MSG_ERROR(can't find current emacs version in \`${srcdir}/lisp/version.el'.) | |
1091 fi | |
1092 | |
1093 ### Specify what sort of things we'll be editing into Makefile and config.h. | |
1094 ### Use configuration here uncanonicalized to avoid exceeding size limits. | |
1095 AC_SUBST(version) | |
1096 AC_SUBST(configuration) | |
1097 AC_SUBST(srcdir) | |
1098 AC_SUBST(prefix) | |
1099 AC_SUBST(exec_prefix) | |
1100 AC_SUBST(bindir) | |
1101 AC_SUBST(datadir) | |
1102 AC_SUBST(statedir) | |
1103 AC_SUBST(libdir) | |
1104 AC_SUBST(mandir) | |
1105 AC_SUBST(infodir) | |
1106 AC_SUBST(lispdir) | |
1107 AC_SUBST(locallisppath) | |
1108 AC_SUBST(lisppath) | |
1109 AC_SUBST(etcdir) | |
1110 AC_SUBST(lockdir) | |
1111 AC_SUBST(archlibdir) | |
1112 AC_SUBST(docdir) | |
1113 AC_SUBST(c_switch_system) | |
1114 AC_SUBST(c_switch_machine) | |
1115 AC_SUBST(LD_SWITCH_X_SITE) | |
1116 AC_SUBST(LD_SWITCH_X_SITE_AUX) | |
1117 AC_SUBST(C_SWITCH_X_SITE) | |
1118 AC_SUBST(CFLAGS) | |
1119 AC_SUBST(X_TOOLKIT_TYPE) | |
1120 AC_SUBST(machfile) | |
1121 AC_SUBST(opsysfile) | |
1122 | |
1123 AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION, "${configuration}") | |
1124 AC_DEFINE_UNQUOTED(config_machfile, "${machfile}") | |
1125 AC_DEFINE_UNQUOTED(config_opsysfile, "${opsysfile}") | |
1126 AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, ${LD_SWITCH_X_SITE}) | |
1127 AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, ${LD_SWITCH_X_SITE_AUX}) | |
1128 AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE, ${C_SWITCH_X_SITE}) | |
1129 AC_DEFINE_UNQUOTED(UNEXEC_SRC, ${UNEXEC_SRC}) | |
1130 | |
1131 if test "${HAVE_X_WINDOWS}" = "yes" ; then | |
1132 AC_DEFINE(HAVE_X_WINDOWS) | |
1133 fi | |
1134 if test "${USE_X_TOOLKIT}" != "none" ; then | |
1135 AC_DEFINE(USE_X_TOOLKIT) | |
1136 fi | |
1137 if test "${HAVE_X11}" = "yes" ; then | |
1138 AC_DEFINE(HAVE_X11) | |
1139 fi | |
1140 if test "${HAVE_XFREE386}" = "yes" ; then | |
1141 AC_DEFINE(HAVE_XFREE386) | |
1142 fi | |
1143 if test "${HAVE_X_MENU}" = "yes" ; then | |
1144 AC_DEFINE(HAVE_X_MENU) | |
1145 fi | |
1146 if test "${GNU_MALLOC}" = "yes" ; then | |
1147 AC_DEFINE(GNU_MALLOC) | |
1148 fi | |
1149 if test "${REL_ALLOC}" = "yes" ; then | |
1150 AC_DEFINE(REL_ALLOC) | |
1151 fi | |
1152 if test "${LISP_FLOAT_TYPE}" = "yes" ; then | |
1153 AC_DEFINE(LISP_FLOAT_TYPE) | |
1154 fi | |
1155 | |
8674
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1156 dnl # ====================== Developer's configuration ======================= |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1157 dnl |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1158 dnl # The following assignments make sense if you're running Emacs on a single |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1159 dnl # machine, one version at a time, and you want changes to the lisp and etc |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1160 dnl # directories in the source tree to show up immediately in your working |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1161 dnl # environment. It saves a great deal of disk space by not duplicating the |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1162 dnl # lisp and etc directories. |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1163 dnl |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1164 dnl if test "$enable_single_tree" = "yes"; then |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1165 dnl bindir='${exec_prefix}/bin/${configuration}' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1166 dnl datadir='${prefix}/common' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1167 dnl statedir='${prefix}/common' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1168 dnl libdir='${bindir}' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1169 dnl lispdir='${prefix}/common/lisp' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1170 dnl locallisppath='${prefix}/common/site-lisp' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1171 dnl lockdir='${prefix}/common/lock' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1172 dnl archlibdir='${libdir}/etc' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1173 dnl etcdir='${prefix}/common/data' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1174 dnl docdir='${prefix}/common/data' |
bcfd4c7eecb0
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8636
diff
changeset
|
1175 dnl fi |
8636 | 1176 |
1177 #### Report on what we decided to do. | |
1178 echo " | |
1179 | |
1180 Configured for \`${canonical}'. | |
1181 | |
1182 Where should the build process find the source code? ${srcdir} | |
1183 What operating system and machine description files should Emacs use? | |
1184 \`${opsysfile}' and \`${machfile}' | |
1185 What compiler should emacs be built with? ${CC} ${CFLAGS} | |
1186 Should Emacs use the GNU version of malloc? ${GNU_MALLOC}${GNU_MALLOC_reason} | |
1187 Should Emacs use the relocating allocator for buffers? ${REL_ALLOC} | |
1188 What window system should Emacs use? ${window_system} | |
1189 What toolkit should Emacs use? ${USE_X_TOOLKIT}${x_includes+ | |
1190 Where do we find X Windows header files? }${x_includes}${x_libraries+ | |
1191 Where do we find X Windows libraries? }${x_libraries} | |
1192 | |
1193 " | |
1194 | |
1195 # Remove any trailing slashes in these variables. | |
1196 changequote(, )dnl | |
1197 test "${prefix}" != NONE && | |
1198 prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'` | |
1199 test "${exec_prefix}" != NONE && | |
1200 exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'` | |
1201 changequote([, ])dnl | |
1202 | |
8677
d41510c69a3f
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8674
diff
changeset
|
1203 AC_OUTPUT(Makefile lib-src/Makefile.in oldXMenu/Makefile \ |
d41510c69a3f
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8674
diff
changeset
|
1204 lwlib/Makefile src/Makefile.in, [ |
8680 | 1205 |
8636 | 1206 ### Make the necessary directories, if they don't exist. |
1207 for dir in ./src ./lib-src ./cpp ./oldXMenu ./lwlib ./etc ; do | |
1208 if test ! -d ${dir}; then | |
1209 mkdir ${dir} | |
1210 fi | |
1211 done | |
1212 | |
1213 # Build src/Makefile from ${srcdir}/src/Makefile.in. This must be done | |
1214 # after src/config.h is built, since we rely on that file. | |
1215 | |
1216 changequote(,)dnl The horror, the horror. | |
1217 # Now get this: Some word that is part of the ${srcdir} directory name | |
1218 # or the ${configuration} value might, just might, happen to be an | |
1219 # identifier like `sun4' or `i386' or something, and be predefined by | |
1220 # the C preprocessor to some helpful value like 1, or maybe the empty | |
1221 # string. Needless to say consequent macro substitutions are less | |
1222 # than conducive to the makefile finding the correct directory. | |
1223 undefs="`echo $top_srcdir $configuration $canonical | | |
1224 sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \ | |
1225 -e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g' \ | |
1226 `" | |
1227 changequote([,])dnl | |
1228 | |
1229 echo creating lib-src/Makefile | |
1230 ( cd lib-src | |
1231 rm -f junk.c junk1.c junk2.c | |
1232 sed -e '/start of cpp stuff/q' \ | |
1233 < Makefile.in > junk1.c | |
1234 sed -e '1,/start of cpp stuff/d'\ | |
1235 -e 's@/\*\*/#\(.*\)$@/* \1 */@' \ | |
1236 < Makefile.in > junk.c | |
1237 $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \ | |
1238 sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c | |
1239 cat junk1.c junk2.c > Makefile.new | |
1240 rm -f junk.c junk1.c junk2.c | |
1241 chmod 444 Makefile.new | |
1242 mv -f Makefile.new Makefile | |
1243 ) | |
1244 | |
1245 echo creating src/Makefile | |
1246 ( cd src | |
1247 rm -f junk.c junk1.c junk2.c | |
1248 sed -e '/start of cpp stuff/q' \ | |
1249 < Makefile.in > junk1.c | |
1250 sed -e '1,/start of cpp stuff/d'\ | |
1251 -e 's@/\*\*/#\(.*\)$@/* \1 */@' \ | |
1252 < Makefile.in > junk.c | |
1253 $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \ | |
1254 sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c | |
1255 cat junk1.c junk2.c > Makefile.new | |
1256 rm -f junk.c junk1.c junk2.c | |
1257 chmod 444 Makefile.new | |
1258 mv -f Makefile.new Makefile | |
1259 ) | |
8677
d41510c69a3f
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
8674
diff
changeset
|
1260 ], [CPP="$CPP" CPPFLAGS="$CPPFLAGS"]) |