changeset 8636:015bd32cdb38

Initial revision
author David J. MacKenzie <djm@gnu.org>
date Fri, 26 Aug 1994 14:57:46 +0000
parents a241401a67ff
children a099de9cf359
files configure.in
diffstat 1 files changed, 1350 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/configure.in	Fri Aug 26 14:57:46 1994 +0000
@@ -0,0 +1,1350 @@
+dnl This is an autoconf script.
+dnl To rebuild the `configure' script from this, execute the command
+dnl 	autoconf
+dnl in the directory containing this script.
+AC_PREREQ(1.106)dnl
+AC_INIT(src/lisp.h)
+AC_CONFIG_HEADER(src/config.h)
+
+bindir='${exec_prefix}/bin'
+datadir='${prefix}/lib'
+statedir='${prefix}/lib'
+libdir='${exec_prefix}/lib'
+mandir='${prefix}/man/man1'
+infodir='${prefix}/info'
+lispdir='${datadir}/emacs/${version}/lisp'
+locallisppath='${datadir}/emacs/site-lisp'
+lisppath='${locallisppath}:${lispdir}'
+etcdir='${datadir}/emacs/${version}/etc'
+lockdir='${statedir}/emacs/lock'
+archlibdir='${libdir}/emacs/${version}/${configuration}'
+docdir='${datadir}/emacs/${version}/etc'
+
+AC_ARG_WITH(x10,
+[  --with-x10              Support the X Window System version 10])
+AC_ARG_WITH(x,
+[  --with-x                Support the X Window System version 11])
+AC_ARG_WITH(x11,
+[  --with-x11              Support the X Window System version 11])
+AC_ARG_WITH(x-toolkit,
+[  --with-x-toolkit=KIT    Use an X toolkit (KIT = lucid or athena)],
+[	  case "${withval}" in
+	    y | ye | yes )	val=athena ;;
+	    n | no )		val=no  ;;
+	    l | lu | luc | luci | lucid )	val=lucid ;;
+	    a | at | ath | athe | athena )	val=athena ;;
+# These don't currently work.
+#	    m | mo | mot | moti | motif )	val=motif ;;
+#	    o | op | ope | open | open- | open-l | open-lo \
+#		| open-loo | open-look )	val=open-look ;;
+	    * )
+[#] AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value
+[#]which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.])
+AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value
+which is \`yes', \`no', \`lucid', or \`athena'.
+Currently, \`yes', \`athena' and \`lucid' are synonyms.])
+	    ;;
+	  esac
+	  with_x_toolkit=$val
+])
+AC_ARG_WITH(gcc,
+[  --with-gcc              Use GCC to compile Emacs])
+AC_ARG_ENABLE(in-place,
+[  --enable-in-place       Use libraries and data files directly out of the 
+                          source tree])
+AC_ARG_ENABLE(single-tree,
+[  --enable-single-tree    Create a directory tree at DIR which looks like:
+                          .../DIR/bin/CONFIGNAME (emacs, etags, etc.)
+                          .../DIR/bin/CONFIGNAME/etc (movemail, etc.)
+                          .../DIR/common/lisp  (emacs' lisp files)
+                          .../DIR/common/site-lisp (local lisp files)
+                          .../DIR/common/lib (DOC, TUTORIAL, etc.)
+                          .../DIR/common/lock (lockfiles)])
+
+#### Make srcdir absolute, if it isn't already.  It's important to
+#### avoid running the path through pwd unnecessary, since pwd can
+#### give you automounter prefixes, which can go away.
+case "${srcdir}" in
+  /* ) ;;
+  . )
+    ## We may be able to use the $PWD environment variable to make this
+    ## absolute.  But sometimes PWD is inaccurate.
+    if test "${PWD}" != "" && test "`(cd ${PWD} ; sh -c pwd)`" = "`pwd`"  ;
+    then
+      srcdir="$PWD"
+    else
+      srcdir="`(cd ${srcdir}; pwd)`"
+    fi
+  ;;
+  *  ) srcdir="`(cd ${srcdir}; pwd)`" ;;
+esac
+
+#### Check if the source directory already has a configured system in it.
+if test `pwd` != `(cd ${srcdir} && pwd)` \
+   && test -f "${srcdir}/src/config.h" ; then
+  AC_MSG_WARN([The directory tree \`${srcdir}' is being used
+   as a build directory right now; it has been configured in its own
+   right.  To configure in another directory as well, you MUST
+   use GNU make.  If you do not have GNU make, then you must
+   now do \`make distclean' in ${srcdir},
+   and then run $0 again.])
+
+  extrasub='/^VPATH[	 ]*=/c\
+vpath %.c $(srcdir)\
+vpath %.h $(srcdir)\
+vpath %.y $(srcdir)\
+vpath %.l $(srcdir)\
+vpath %.s $(srcdir)\
+vpath %.in $(srcdir)'
+fi
+
+#### Given the configuration name, set machfile and opsysfile to the
+#### names of the m/*.h and s/*.h files we should use.
+
+### Canonicalize the configuration name.
+
+AC_CANONICAL_HOST
+canonical=$host
+
+changequote(, )dnl
+
+### If you add support for a new configuration, add code to this
+### switch statement to recognize your configuration name and select
+### the appropriate operating system and machine description files.
+
+### You would hope that you could choose an m/*.h file pretty much
+### based on the machine portion of the configuration name, and an s-
+### file based on the operating system portion.  However, it turns out
+### that each m/*.h file is pretty manufacturer-specific - for
+### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are
+### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS
+### machines.  So we basically have to have a special case for each
+### configuration name.
+###
+### As far as handling version numbers on operating systems is
+### concerned, make sure things will fail in a fixable way.  If
+### /etc/MACHINES doesn't say anything about version numbers, be
+### prepared to handle anything reasonably.  If version numbers
+### matter, be sure /etc/MACHINES says something about it.
+###
+### Eric Raymond says we should accept strings like "sysvr4" to mean
+### "System V Release 4"; he writes, "The old convention encouraged
+### confusion between `system' and `release' levels'."
+
+machine='' opsys='' unported=no
+case "${canonical}" in
+
+  ## NetBSD ports
+  *-*-netbsd* )
+    opsys=netbsd
+    case "${canonical}" in
+      i[345]86-*-netbsd*) machine=intel386 ;;
+      m68k-*-netbsd*)
+			# This is somewhat bogus.
+			machine=hp9000s300 ;;
+      mips-*-netbsd*)	machine=pmax ;;
+      ns32k-*-netbsd*)	machine=ns32000 ;;
+      sparc-*-netbsd*)	machine=sparc ;;
+    esac
+  ;;
+
+  ## Alliant machines
+  ## Strictly speaking, we need the version of the alliant operating
+  ## system to choose the right machine file, but currently the
+  ## configuration name doesn't tell us enough to choose the right
+  ## one; we need to give alliants their own operating system name to
+  ## do this right.  When someone cares, they can help us.
+  fx80-alliant-* )
+    machine=alliant4 opsys=bsd4-2
+  ;;
+  i860-alliant-* )
+    machine=alliant-2800 opsys=bsd4-3
+  ;;
+
+  ## Altos 3068
+  m68*-altos-sysv* )
+    machine=altos opsys=usg5-2
+  ;;
+    
+  ## Amdahl UTS
+  580-amdahl-sysv* )
+    machine=amdahl opsys=usg5-2-2
+  ;;
+
+  ## Appallings - I mean, Apollos - running Domain
+  m68*-apollo* )
+    machine=apollo opsys=bsd4-2
+  ;;
+
+  ## AT&T 3b2, 3b5, 3b15, 3b20
+  we32k-att-sysv* )
+    machine=att3b opsys=usg5-2-2
+  ;;
+
+  ## AT&T 3b1 - The Mighty Unix PC!
+  m68*-att-sysv* )
+    machine=7300 opsys=usg5-2-2
+  ;;
+
+  ## Bull dpx20
+  rs6000-bull-bosx* )
+    machine=ibmrs6000 opsys=aix3-2
+  ;;
+
+  ## Bull dpx2
+  m68*-bull-sysv3* )
+    machine=dpx2 opsys=usg5-3
+  ;;
+
+  ## Bull sps7
+  m68*-bull-sysv2* )
+    machine=sps7 opsys=usg5-2
+  ;;
+
+  ## CCI 5/32, 6/32 -- see "Tahoe".
+
+  ## Celerity
+  ## I don't know what configuration name to use for this; config.sub
+  ## doesn't seem to know anything about it.  Hey, Celerity users, get
+  ## in touch with us!
+  celerity-celerity-bsd* )
+    machine=celerity opsys=bsd4-2
+  ;;
+
+  ## Clipper
+  ## What operating systems does this chip run that Emacs has been
+  ## tested on?
+  clipper-* )
+    machine=clipper
+    ## We'll use the catch-all code at the bottom to guess the
+    ## operating system.
+  ;;
+
+  ## Convex
+  *-convex-bsd* | *-convex-convexos* )
+    machine=convex opsys=bsd4-3
+    ## Prevents suprious white space in makefiles - d.m.cooke@larc.nasa.gov
+    NON_GNU_CPP="cc -E -P"
+  ;;
+
+  ## Cubix QBx/386
+  i[345]86-cubix-sysv* )
+    machine=intel386 opsys=usg5-3
+  ;;
+
+  ## Cydra 5
+  cydra*-cydrome-sysv* )
+    machine=cydra5 opsys=usg5-3
+  ;;
+
+  ## Data General AViiON Machines
+  m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* )
+    machine=aviion opsys=dgux5-4r3
+  ;;
+  m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* )
+    machine=aviion opsys=dgux5-4r2
+  ;;
+  m88k-dg-dgux* )
+    machine=aviion opsys=dgux
+  ;;
+
+  ## DECstations
+  mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* )
+    machine=pmax opsys=bsd4-2
+  ;;
+  mips-dec-ultrix* | mips-dec-bsd* )
+    machine=pmax opsys=bsd4-3
+  ;;
+  mips-dec-osf* )
+    machine=pmax opsys=osf1
+  ;;
+
+  ## Motorola Delta machines
+  m68k-motorola-sysv* | m68000-motorola-sysv* )
+    machine=delta opsys=usg5-3
+    if test -z "`type gnucc | grep 'not found'`"
+    then CC=gnucc
+    else
+      if test -z "`type gcc | grep 'not found'`"
+      then CC=gcc
+      else CC=cc
+      fi
+    fi
+  ;;
+  m88k-motorola-sysv4* )
+    machine=delta88k opsys=usg5-4
+  ;;
+  m88k-motorola-sysv* | m88k-motorola-m88kbcs* )
+    machine=delta88k opsys=usg5-3
+  ;;
+
+  ## Dual machines
+  m68*-dual-sysv* )
+    machine=dual opsys=usg5-2
+  ;;
+  m68*-dual-uniplus* )
+    machine=dual opsys=unipl5-2
+  ;;
+
+  ## Elxsi 6400
+  elxsi-elxsi-sysv* )
+    machine=elxsi opsys=usg5-2
+  ;;
+
+  ## Encore machines
+  ns16k-encore-bsd* )
+    machine=ns16000 opsys=umax
+  ;;
+
+  ## The GEC 93 - apparently, this port isn't really finished yet.
+
+  ## Gould Power Node and NP1
+  pn-gould-bsd4.2* )
+    machine=gould opsys=bsd4-2
+  ;;
+  pn-gould-bsd4.3* )
+    machine=gould opsys=bsd4-3
+  ;;
+  np1-gould-bsd* )
+    machine=gould-np1 opsys=bsd4-3
+  ;;
+
+  ## Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000
+  ## as far as Emacs is concerned).
+  m88k-harris-cxux* )
+    # Build needs to be different on 7.0 and later releases
+    case "`uname -r`" in
+       [56].[0-9] ) machine=nh4000 opsys=cxux ;;
+       [7].[0-9] ) machine=nh4000 opsys=cxux7 ;;
+    esac
+  ;;
+  ## Harris ecx or gcx running CX/UX (Series 1200, Series 3000)
+  m68k-harris-cxux* )
+    machine=nh3000 opsys=cxux
+  ;;
+
+  ## Honeywell XPS100
+  xps*-honeywell-sysv* )
+    machine=xps100 opsys=usg5-2
+  ;;
+
+  ## HP 9000 series 200 or 300
+  m68*-hp-bsd* )
+    machine=hp9000s300 opsys=bsd4-3
+  ;;
+  ## HP/UX 7, 8 and 9 are supported on these machines.
+  m68*-hp-hpux* )
+    case "`uname -r`" in
+      ## Someone's system reports A.B8.05 for this.
+      ## I wonder what other possibilities there are.
+      *.B8.* ) machine=hp9000s300 opsys=hpux8 ;;
+      *.08.* ) machine=hp9000s300 opsys=hpux8 ;;
+      *.09.* ) machine=hp9000s300 opsys=hpux9 ;;
+      *) machine=hp9000s300 opsys=hpux ;;
+    esac
+  ;;
+
+  ## HP 9000 series 700 and 800, running HP/UX
+  hppa*-hp-hpux7* )
+    machine=hp800 opsys=hpux
+  ;;
+  hppa*-hp-hpux8* )
+    machine=hp800 opsys=hpux8
+  ;;
+  hppa*-hp-hpux9shr* )
+    machine=hp800 opsys=hpux9shr
+  ;;
+  hppa*-hp-hpux9* )
+    machine=hp800 opsys=hpux9
+  ;;
+
+  ## HP 9000 series 700 and 800, running HP/UX
+  hppa*-hp-hpux* )
+    ## Cross-compilation?  Nah!
+    case "`uname -r`" in
+      ## Someone's system reports A.B8.05 for this.
+      ## I wonder what other possibilities there are.
+      *.B8.* ) machine=hp800 opsys=hpux8 ;;
+      *.08.* ) machine=hp800 opsys=hpux8 ;;
+      *.09.* ) machine=hp800 opsys=hpux9 ;;
+      *) machine=hp800 opsys=hpux ;;
+    esac
+  ;;
+
+  ## Orion machines
+  orion-orion-bsd* )
+    machine=orion opsys=bsd4-2
+  ;;
+  clipper-orion-bsd* )
+    machine=orion105 opsys=bsd4-2
+  ;;
+
+  ## IBM machines
+  i[345]86-ibm-aix1.1* )
+    machine=ibmps2-aix opsys=usg5-2-2
+  ;;
+  i[345]86-ibm-aix1.[23]* | i[345]86-ibm-aix* )
+    machine=ibmps2-aix opsys=usg5-3
+  ;;
+  i370-ibm-aix*)
+    machine=ibm370aix opsys=usg5-3
+  ;;
+  rs6000-ibm-aix3.1* )
+    machine=ibmrs6000 opsys=aix3-1
+  ;;
+  rs6000-ibm-aix3.2.5)
+    machine=ibmrs6000 opsys=aix3-2-5
+  ;;
+  rs6000-ibm-aix3.2* | rs6000-ibm-aix* )
+    machine=ibmrs6000 opsys=aix3-2
+  ;;
+  romp-ibm-bsd4.3* )
+    machine=ibmrt opsys=bsd4-3
+  ;;	
+  romp-ibm-bsd4.2* )
+    machine=ibmrt opsys=bsd4-2
+  ;;
+  romp-ibm-aos4.3* )
+    machine=ibmrt opsys=bsd4-3
+  ;;	
+  romp-ibm-aos4.2* )
+    machine=ibmrt opsys=bsd4-2
+  ;;
+  romp-ibm-aos* )
+    machine=ibmrt opsys=bsd4-3
+  ;;
+  romp-ibm-bsd* )
+    machine=ibmrt opsys=bsd4-3
+  ;;
+  romp-ibm-aix* )
+    machine=ibmrt-aix opsys=usg5-2-2
+  ;;
+
+  ## Integrated Solutions `Optimum V'
+  m68*-isi-bsd4.2* )
+    machine=isi-ov opsys=bsd4-2
+  ;;
+  m68*-isi-bsd4.3* )
+    machine=isi-ov opsys=bsd4-3
+  ;;
+
+  ## Intel 386 machines where we do care about the manufacturer
+  i[345]86-intsys-sysv* )
+    machine=is386 opsys=usg5-2-2
+  ;;
+
+  ## Prime EXL
+  i[345]86-prime-sysv* )
+    machine=i386 opsys=usg5-3
+  ;;
+
+  ## Sequent Symmetry
+  i[345]86-sequent-bsd* )
+    machine=symmetry opsys=bsd4-3
+  ;;
+
+  ## Unspecified sysv on an ncr machine defaults to svr4.2.
+  ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.)
+  i[345]86-ncr-sysv* )
+    machine=intel386 opsys=usg5-4-2
+  ;;
+
+  ## Intel 860
+  i860-*-sysv4* )
+    machine=i860 opsys=usg5-4
+    NON_GNU_CC="/bin/cc" # Ie, not the one in /usr/ucb/cc.
+    NON_GNU_CPP="/usr/ccs/lib/cpp" # cc -E tokenizes macro expansion.
+  ;;
+
+  ## Masscomp machines
+  m68*-masscomp-rtu* )
+    machine=masscomp opsys=rtu
+  ;;
+
+  ## Megatest machines
+  m68*-megatest-bsd* )
+    machine=mega68 opsys=bsd4-2
+  ;;
+
+  ## Workstations sold by MIPS
+  ## This is not necessarily all workstations using the MIPS processor -
+  ## Irises are produced by SGI, and DECstations by DEC.
+
+  ## etc/MACHINES lists mips.h and mips4.h as possible machine files,
+  ## and usg5-2-2 and bsd4-3 as possible OS files.  The only guidance
+  ## it gives for choosing between the alternatives seems to be "Use
+  ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with
+  ## the BSD world."  I'll assume that these are instructions for
+  ## handling two odd situations, and that every other situation
+  ## should use mips.h and usg5-2-2, they being listed first.
+  mips-mips-usg* )
+    machine=mips4
+    ## Fall through to the general code at the bottom to decide on the OS.
+  ;;
+  mips-mips-riscos4* )
+    machine=mips4 opsys=bsd4-3
+    NON_GNU_CC="cc -systype bsd43"
+    NON_GNU_CPP="cc -systype bsd43 -E"
+  ;;
+  mips-mips-bsd* )
+    machine=mips opsys=bsd4-3
+  ;;
+  mips-mips-* )
+    machine=mips opsys=usg5-2-2
+  ;;
+
+  ## NeXT
+  m68*-next-* | i[345]86-next-* )
+    machine=next opsys=mach2
+  ;;
+
+  ## The complete machine from National Semiconductor
+  ns32k-ns-genix* )
+    machine=ns32000 opsys=usg5-2
+  ;;
+
+  ## NCR machines
+  m68*-ncr-sysv2* | m68*-ncr-sysvr2* )
+    machine=tower32 opsys=usg5-2-2
+  ;;
+  m68*-ncr-sysv3* | m68*-ncr-sysvr3* )
+    machine=tower32v3 opsys=usg5-3
+  ;;
+
+  ## Nixdorf Targon 31
+  m68*-nixdorf-sysv* )
+    machine=targon31 opsys=usg5-2-2
+  ;;
+
+  ## Nu (TI or LMI)
+  m68*-nu-sysv* )
+    machine=nu opsys=usg5-2
+  ;;
+
+  ## Plexus
+  m68*-plexus-sysv* )
+    machine=plexus opsys=usg5-2
+  ;;
+
+  ## Pyramid machines
+  ## I don't really have any idea what sort of processor the Pyramid has,
+  ## so I'm assuming it is its own architecture.
+  pyramid-pyramid-bsd* )
+    machine=pyramid opsys=bsd4-2
+  ;;
+
+  ## Sequent Balance
+  ns32k-sequent-bsd4.2* )
+    machine=sequent opsys=bsd4-2
+  ;;
+  ns32k-sequent-bsd4.3* )
+    machine=sequent opsys=bsd4-3
+  ;;
+
+  ## Siemens Nixdorf
+  mips-siemens-sysv* )
+    machine=mips-siemens opsys=usg5-4
+    NON_GNU_CC=/usr/ccs/bin/cc
+    NON_GNU_CPP=/usr/ccs/lib/cpp
+  ;;
+
+  ## Silicon Graphics machines
+  ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030)
+  m68*-sgi-iris3.5* )
+    machine=irist opsys=iris3-5
+  ;;
+  m68*-sgi-iris3.6* | m68*-sgi-iris*)
+    machine=irist opsys=iris3-6
+  ;;
+  ## Iris 4D
+  mips-sgi-irix3* )
+    machine=iris4d opsys=irix3-3
+  ;;
+  mips-sgi-irix5* )
+    machine=iris4d opsys=irix5-0
+  ;;
+  mips-sgi-irix4* | mips-sgi-irix* )
+    machine=iris4d opsys=irix4-0
+  ;;
+
+  ## SONY machines
+  m68*-sony-bsd4.2* )
+    machine=news opsys=bsd4-2
+  ;;
+  m68*-sony-bsd4.3* )
+    machine=news opsys=bsd4-3
+  ;;
+  m68*-sony-newsos3*)
+    machine=news opsys=bsd4-3
+  ;;
+  mips-sony-bsd* | mips-sony-newsos4* )
+    machine=news-risc opsys=bsd4-3
+  ;;
+  mips-sony-newsos* )
+    machine=news-risc opsys=newsos5
+  ;;
+
+  ## Stride
+  m68*-stride-sysv* )
+    machine=stride opsys=usg5-2
+  ;;
+
+  ## Suns
+  *-sun-sunos* | *-sun-bsd* | *-sun-solaris* | i[345]86-*-solaris2* | i[345]86-*-sunos5* )
+    case "${canonical}" in
+      m68*-sunos1* )	machine=sun1 ;;
+      m68*-sunos2* )	machine=sun2 ;;
+      m68* )		machine=sun3 ;;
+      i[345]86-sun-sunos[34]* )	machine=sun386 ;;
+      i[345]86-*-* )     machine=intel386 ;;
+      sparc* )		machine=sparc ;;
+      * )		unported=yes ;;
+    esac
+    case "${canonical}" in
+      ## The Sun386 didn't get past 4.0.
+      i[345]86-*-sunos4	  ) opsys=sunos4-0 ;;
+      *-sunos4.0*	  ) opsys=sunos4-0 ;;
+      *-sunos4.1.3*	  ) opsys=sunos4-1-3
+		NON_GCC_TEST_OPTIONS=-Bstatic
+		GCC_TEST_OPTIONS=-static
+		;;
+      *-sunos4shr*	  ) opsys=sunos4shr ;;
+      *-sunos4* | *-sunos ) opsys=sunos4-1
+		NON_GCC_TEST_OPTIONS=-Bstatic
+		GCC_TEST_OPTIONS=-static
+		;;
+      *-sunos5.3* | *-solaris2.3* )
+		opsys=sol2-3
+		NON_GNU_CPP=/usr/ccs/lib/cpp
+		;;
+      *-sunos5.4* | *-solaris2.4* )
+		opsys=sol2-4
+		NON_GNU_CPP=/usr/ccs/lib/cpp
+		;;
+      *-sunos5* | *-solaris* )
+		opsys=sol2
+		NON_GNU_CPP=/usr/ccs/lib/cpp
+		;;
+      *			  ) opsys=bsd4-2   ;;
+    esac
+  ;;
+
+  ## Tadpole 68k
+  m68*-tadpole-sysv* )
+    machine=tad68k opsys=usg5-3
+  ;;
+
+  ## Tahoe machines
+  tahoe-tahoe-bsd4.2* )
+    machine=tahoe opsys=bsd4-2
+  ;;
+  tahoe-tahoe-bsd4.3* )
+    machine=tahoe opsys=bsd4-3
+  ;;
+
+  ## Tandem Integrity S2
+  mips-tandem-sysv* )
+    machine=tandem-s2 opsys=usg5-3
+  ;;
+
+  ## Tektronix XD88
+  m88k-tektronix-sysv3* )
+  machine=tekxd88 opsys=usg5-3
+  ;;
+
+  ## Tektronix 16000 box (6130?)
+  ns16k-tektronix-bsd* )
+    machine=ns16000 opsys=bsd4-2
+  ;;
+  ## Tektronix 4300
+  ## src/m/tek4300.h hints that this is a m68k machine.
+  m68*-tektronix-bsd* )
+    machine=tek4300 opsys=bsd4-3
+  ;;
+
+  ## Titan P2 or P3
+  ## We seem to have lost the machine-description file titan.h!
+  titan-titan-sysv* )
+    machine=titan opsys=usg5-3
+  ;;
+  
+  ## Ustation E30 (SS5E)
+  m68*-unisys-uniplus* )
+    machine=ustation opsystem=unipl5-2
+  ;;
+
+  ## Vaxen.
+  vax-dec-* )
+    machine=vax
+    case "${canonical}" in
+      *-bsd4.1* ) 					opsys=bsd4-1 ;;
+      *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* )	opsys=bsd4-2 ;;
+      *-bsd4.3* | *-ultrix* ) 				opsys=bsd4-3 ;;
+      *-bsd386* | *-bsdi* )				opsys=bsd386 ;;
+      *-sysv[01]* | *-sysvr[01]* ) 			opsys=usg5-0 ;;
+      *-sysv2* | *-sysvr2* )				opsys=usg5-2 ;;
+      *-vms* ) 						opsys=vms ;;
+      * ) 						unported=yes
+    esac
+  ;;
+
+  ## Whitechapel MG1
+  ns16k-whitechapel-* )
+    machine=mg1
+    ## We don't know what sort of OS runs on these; we'll let the
+    ## operating system guessing code below try.
+  ;;
+
+  ## Wicat
+  m68*-wicat-sysv* )
+    machine=wicat opsys=usg5-2
+  ;;
+
+  ## Intel 386 machines where we don't care about the manufacturer
+  i[345]86-*-* )
+    machine=intel386
+    case "${canonical}" in
+      *-isc1.* | *-isc2.[01]* )	opsys=386-ix ;;
+      *-isc2.2* )		opsys=isc2-2 ;;
+      *-isc4.0* )		opsys=isc4-0 ;;
+      *-isc* )			opsys=isc3-0 ;;
+      *-esix5* )		opsys=esix5r4; NON_GNU_CPP=/usr/lib/cpp ;;
+      *-esix* )			opsys=esix ;;
+      *-xenix* )		opsys=xenix ;;
+      *-linux* )		opsys=linux ;;
+      *-sco3.2v4* )		opsys=sco4 ; NON_GNU_CPP=/lib/cpp  ;;
+      *-bsd386* | *-bsdi* )	opsys=bsd386 ;;
+      *-386bsd* )	        opsys=386bsd ;;
+      *-freebsd* )	        opsys=freebsd ;;
+      *-nextstep* )             opsys=mach2 ;;
+      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
+    esac
+  ;;
+
+  * )
+    unported=yes
+  ;;
+esac
+
+### If the code above didn't choose an operating system, just choose
+### an operating system based on the configuration name.  You really
+### only want to use this when you have no idea what the right
+### operating system is; if you know what operating systems a machine
+### runs, it's cleaner to make it explicit in the case statement
+### above.
+if test x"${opsys}" = x; then
+  case "${canonical}" in
+    *-gnu* )				opsys=gnu ;;
+    *-bsd4.[01] )			opsys=bsd4-1 ;;
+    *-bsd4.2 )				opsys=bsd4-2 ;;
+    *-bsd4.3 )				opsys=bsd4-3 ;;
+    *-sysv0 | *-sysvr0 )		opsys=usg5-0 ;;
+    *-sysv2 | *-sysvr2 )		opsys=usg5-2 ;;
+    *-sysv2.2 | *-sysvr2.2 )		opsys=usg5-2-2 ;;
+    *-sysv3 | *-sysvr3 )		opsys=usg5-3 ;;
+    *-sysv4 | *-sysvr4 )		opsys=usg5-4 ;;
+    *-sysv4.1 | *-sysvr4.1 )
+	NON_GNU_CPP=/usr/lib/cpp
+	opsys=usg5-4 ;;
+    *-sysv4.2 | *-sysvr4.2 )		opsys=usg5-4-2 ;;
+    * )
+      unported=yes
+    ;;
+  esac
+fi
+
+changequote([, ])dnl
+
+if test $unported = yes; then
+  AC_MSG_ERROR([Emacs hasn't been ported to \`${canonical}' systems.
+Check \`etc/MACHINES' for recognized configuration names.])
+fi
+
+machfile="m/${machine}.h"
+opsysfile="s/${opsys}.h"
+
+
+#### Choose a compiler.
+test -n "$CC" && cc_specified=yes
+
+case ${with_gcc} in
+  "yes" ) CC="gcc" GCC=yes ;;
+  "no"  ) test -z "$CC" && CC=cc ;;
+  * ) AC_PROG_CC
+esac
+
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+
+#### Some systems specify a CPP to use unless we are using GCC.
+#### Now that we know whether we are using GCC, we can decide whether
+#### to use that one.
+if test "x$NON_GNU_CPP" != x && test x$GCC != xyes && test "x$CPP" = x
+then
+  CPP="$NON_GNU_CPP"
+fi
+
+#### Some systems specify a CC to use unless we are using GCC.
+#### Now that we know whether we are using GCC, we can decide whether
+#### to use that one.
+if test "x$NON_GNU_CC" != x && test x$GCC != xyes &&
+  test x$cc_specified != xyes
+then
+  CC="$NON_GNU_CC"
+fi
+
+if test x$GCC = xyes && test "x$GCC_TEST_OPTIONS" != x
+then
+  CC="$CC $GCC_TEST_OPTIONS"
+fi  
+
+if test x$GCC = x && test "x$NON_GCC_TEST_OPTIONS" != x
+then
+  CC="$CC $NON_GCC_TEST_OPTIONS"
+fi  
+
+#### Some other nice autoconf tests.  If you add a test here which
+#### should make an entry in src/config.h, don't forget to add an
+#### #undef clause to src/config.h.in for autoconf to modify.
+
+dnl checks for programs
+AC_LN_S
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_YACC
+
+dnl checks for header files
+AC_HAVE_HEADERS(sys/timeb.h sys/time.h unistd.h)
+AC_STDC_HEADERS
+AC_TIME_WITH_SYS_TIME
+AC_SYS_SIGLIST_DECLARED
+
+dnl checks for typedefs
+AC_RETSIGTYPE
+
+dnl checks for structure members
+AC_STRUCT_TM
+AC_TIMEZONE
+
+dnl checks for compiler characteristics
+AC_CONST
+
+dnl check for Make feature
+AC_SET_MAKE
+
+dnl checks for operating system services
+AC_LONG_FILE_NAMES
+
+dnl other checks for UNIX variants
+
+#### Choose a window system.
+AC_MSG_CHECKING(for specified window system)
+
+window_system=''
+case "${with_x}" in
+  yes ) window_system=${window_system}x11 ;;
+  no ) window_system=${window_system}none ;;
+esac
+
+case "${window_system}" in
+  .* ) ;;
+  * )
+    case "${with_x11}" in
+      yes ) window_system=x11 ;;
+      no ) window_system=none ;;
+    esac
+    case "${with_x10}" in
+      yes ) window_system=x10 ;;
+      no ) window_system=none ;;
+    esac ;;
+esac
+
+case "${window_system}" in
+  "none" | "x11" | "x10" ) ;;
+  "" )
+    # --x-includes or --x-libraries implies --with-x11.
+    if test "${x_includes}" != NONE || test "${x_libraries}" != NONE; then
+      window_system=x11
+    else
+      # If the user didn't specify a window system and we found X11, use it.
+      if test -r /usr/lib/libX11.a \
+	 -o -d /usr/include/X11 \
+         -o -d /usr/X386/include \
+	 -o -d ${x_includes}/X11 ; then
+        window_system=x11
+      fi
+    fi
+  ;;
+  * )
+    AC_MSG_ERROR(Don't specify a window system more than once.)
+  ;;
+esac
+
+AC_MSG_RESULT(${window_system})
+
+case "${window_system}" in
+  "" | "x11" )
+    ### If the user hasn't specified where we should find X, try
+    ### letting Autoconf figure that out.
+    if test "${x_includes}" = NONE && test "${x_libraries}" = NONE; then
+      AC_FIND_X
+    fi
+    if test "${x_includes}" != NONE || test "${x_libraries}" != NONE; then
+      window_system=x11
+    fi
+  ;;
+esac
+
+test -z "${window_system}" && window_system=none
+
+test "${x_libraries}" != NONE && LD_SWITCH_X_SITE="-L${x_libraries}"
+test "${x_libraries}" != NONE && LD_SWITCH_X_SITE_AUX="-R${x_libraries}"
+test "${x_includes}" != NONE && C_SWITCH_X_SITE="-I${x_includes}"
+
+# Avoid forcing the search of /usr/include before fixed include files.
+if test "$C_SWITCH_X_SITE" = "-I/usr/include"; then
+   C_SWITCH_X_SITE=" "
+fi
+
+case "${window_system}" in
+  x11 )
+    HAVE_X_WINDOWS=yes
+    HAVE_X11=yes
+    case "${with_x_toolkit}" in
+      athena | lucid ) USE_X_TOOLKIT=LUCID ;;	
+      motif ) USE_X_TOOLKIT=MOTIF ;;	
+      open-look ) USE_X_TOOLKIT=OPEN_LOOK ;;	
+      * ) USE_X_TOOLKIT=none ;;
+    esac
+  ;;
+  x10 )
+    HAVE_X_WINDOWS=yes
+    HAVE_X11=no
+    USE_X_TOOLKIT=none
+  ;;
+  none )
+    HAVE_X_WINDOWS=no
+    HAVE_X11=no
+    USE_X_TOOLKIT=none
+  ;;
+esac
+X_TOOLKIT_TYPE=$USE_X_TOOLKIT
+
+### If we're using X11, we should use the X menu package.
+HAVE_X_MENU=no
+case ${HAVE_X11} in
+  yes ) HAVE_X_MENU=yes ;;
+esac
+
+#### Extract some information from the operating system and machine files.
+
+AC_CHECKING([the machine- and system-dependent files to find out
+ - which libraries the lib-src programs will want, and
+ - whether the GNU malloc routines are usable])
+
+### First figure out CFLAGS (which we use for running the compiler here)
+### and REAL_CFLAGS (which we use for real compilation).
+### The two are the same except on a few systems, where they are made
+### different to work around various lossages.  For example,
+### GCC 2.5 on Linux needs them to be different because it treats -g
+### as implying static linking.
+
+### If the CFLAGS env var is specified, we use that value
+### instead of the default.
+
+### It's not important that this name contain the PID; you can't run
+### two configures in the same directory and have anything work
+### anyway.
+tempcname="conftest.c"
+
+echo '
+#include "'${srcdir}'/src/'${opsysfile}'"
+#include "'${srcdir}'/src/'${machfile}'"
+#ifndef LIBS_MACHINE
+#define LIBS_MACHINE
+#endif
+#ifndef LIBS_SYSTEM
+#define LIBS_SYSTEM
+#endif
+#ifndef C_SWITCH_SYSTEM
+#define C_SWITCH_SYSTEM
+#endif
+#ifndef C_SWITCH_MACHINE
+#define C_SWITCH_MACHINE
+#endif
+configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
+configure___ c_switch_system=C_SWITCH_SYSTEM
+configure___ c_switch_machine=C_SWITCH_MACHINE
+
+#ifndef LIB_X11_LIB
+#define LIB_X11_LIB -lX11
+#endif
+
+#ifndef LIBX11_MACHINE
+#define LIBX11_MACHINE
+#endif
+
+#ifndef LIBX11_SYSTEM
+#define LIBX11_SYSTEM
+#endif
+configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM
+
+#ifdef UNEXEC
+configure___ unexec=UNEXEC
+#else
+configure___ unexec=unexec.o
+#endif
+
+#ifdef SYSTEM_MALLOC
+configure___ system_malloc=yes
+#else
+configure___ system_malloc=no
+#endif
+
+#ifndef C_DEBUG_SWITCH
+#define C_DEBUG_SWITCH -g
+#endif
+
+#ifndef C_OPTIMIZE_SWITCH
+#define C_OPTIMIZE_SWITCH -O
+#endif
+
+#ifdef THIS_IS_CONFIGURE
+
+/* Get the CFLAGS for tests in configure.  */
+#ifdef __GNUC__
+configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}'
+#else
+configure___ CFLAGS=C_DEBUG_SWITCH '${CFLAGS}'
+#endif
+
+#else /* not THIS_IS_CONFIGURE */
+
+/* Get the CFLAGS for real compilation.  */
+#ifdef __GNUC__
+configure___ REAL_CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}'
+#else
+configure___ REAL_CFLAGS=C_DEBUG_SWITCH '${CFLAGS}'
+#endif
+
+#endif /* not THIS_IS_CONFIGURE */
+' > ${tempcname}
+
+# The value of CPP is a quoted variable reference, so we need to do this
+# to get its actual value...
+CPP=`eval "echo $CPP"`
+changequote(, )dnl
+eval `${CPP} -Isrc ${tempcname} \
+       | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'`
+if test "x$CFLAGS" = x; then
+  eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \
+	 | sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'`
+else
+  REAL_CFLAGS="$CFLAGS"
+fi
+changequote([, ])dnl
+rm ${tempcname}
+
+### Compute the unexec source name from the object name.
+UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`"
+
+# Do the opsystem or machine files prohibit the use of the GNU malloc?
+# Assume not, until told otherwise.
+GNU_MALLOC=yes
+if test "${system_malloc}" = "yes"; then
+  GNU_MALLOC=no
+  GNU_MALLOC_reason="
+  (The GNU allocators don't work with this system configuration.)"
+fi
+
+if test x"${REL_ALLOC}" = x; then
+  REL_ALLOC=${GNU_MALLOC}
+fi
+
+LISP_FLOAT_TYPE=yes
+
+
+#### Add the libraries to LIBS and check for some functions.
+
+CPPFLAGS="$c_switch_system $c_switch_machine $CPPFLAGS"
+LIBS="$libsrc_libs"
+
+dnl If found, this defines HAVE_LIBDNET, which m/pmax.h checks,
+dnl and also adds -ldnet to LIBS, which Autoconf uses for checks.
+AC_CHECK_LIB(dnet, dnet_ntoa)
+dnl This causes -lresolv to get used in subsequent tests,
+dnl which causes failures on some systems such as HPUX 9.
+dnl AC_CHECK_LIB(resolv, gethostbyname)
+
+dnl FIXME replace main with a function we actually want from this library.
+AC_CHECK_LIB(Xbsd, main, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd")
+
+AC_MSG_CHECKING(for XFree86)
+if test -d /usr/X386/include; then
+  AC_MSG_RESULT(yes)
+  HAVE_XFREE386=yes
+  test -z "${C_SWITCH_X_SITE}" && C_SWITCH_X_SITE="-I/usr/X386/include"
+else
+  AC_MSG_RESULT(no)
+fi
+
+# We change CFLAGS temporarily so that C_SWITCH_X_SITE gets used
+# for the tests that follow.
+
+if test "${HAVE_X11}" = "yes"; then
+  DEFS="$C_SWITCH_X_SITE $DEFS"
+  LIBS="$LD_SWITCH_X_SITE $LIBX $LIBS"
+  CFLAGS="$C_SWITCH_X_SITE $CFLAGS"
+  AC_HAVE_FUNCS(XrmSetDatabase XScreenResourceString \
+XScreenNumberOfScreen XSetWMProtocols)
+fi
+
+if test "${USE_X_TOOLKIT}" != "none"; then
+  AC_MSG_CHECKING(X11 toolkit version)
+  AC_COMPILE_CHECK(, [#include <X11/Intrinsic.h>],
+[#if XtSpecificationRelease < 6
+fail;
+#endif
+], [AC_MSG_RESULT(6)
+    AC_DEFINE(HAVE_X11XTR6)],
+   [AC_MSG_RESULT(not 6)])
+fi
+
+# If netdb.h doesn't declare h_errno, we must declare it by hand.
+AC_MSG_CHECKING(whether netdb declarares h_errno)
+AC_COMPILE_CHECK(, [#include <netdb.h>],
+[int
+foo ()
+{
+  return h_errno;
+}
+], [AC_MSG_RESULT(yes)
+    AC_DEFINE(HAVE_H_ERRNO)],
+   [AC_MSG_RESULT(no)])
+
+AC_ALLOCA
+
+# logb and frexp are found in -lm on most systems.
+AC_CHECK_LIB(m, logb)
+AC_HAVE_FUNCS(gettimeofday gethostname dup2 rename closedir mkdir rmdir \
+random rand48 bcopy bcmp logb frexp fmod drem ftime res_init setsid strerror \
+fpathconf)
+
+ok_so_far=yes
+AC_FUNC_CHECK(socket, , ok_so_far=no)
+if test $ok_so_far = yes; then
+  AC_HEADER_CHECK(netinet/in.h, , ok_so_far=no)
+fi
+if test $ok_so_far = yes; then
+  AC_HEADER_CHECK(arpa/inet.h, , ok_so_far=no)
+fi
+if test $ok_so_far = yes; then
+  AC_DEFINE(HAVE_INET_SOCKETS)
+fi
+
+# Set up the CFLAGS for real compilation, so we can substitute it.
+CFLAGS="$REAL_CFLAGS"
+
+changequote(, )dnl
+#### Find out which version of Emacs this is.
+version=`grep 'defconst[	 ]*emacs-version' ${srcdir}/lisp/version.el \
+	 | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
+changequote([, ])dnl
+if test x"${version}" = x; then
+  AC_MSG_ERROR(can't find current emacs version in \`${srcdir}/lisp/version.el'.)
+fi
+
+if test -f /usr/lpp/X11/bin/smt.exp; then
+  AC_DEFINE(HAVE_AIX_SMT_EXP)
+fi
+
+### Specify what sort of things we'll be editing into Makefile and config.h.
+### Use configuration here uncanonicalized to avoid exceeding size limits.
+AC_SUBST(version)
+AC_SUBST(configuration)
+AC_SUBST(srcdir)
+AC_SUBST(prefix)
+AC_SUBST(exec_prefix)
+AC_SUBST(bindir)
+AC_SUBST(datadir)
+AC_SUBST(statedir)
+AC_SUBST(libdir)
+AC_SUBST(mandir)
+AC_SUBST(infodir)
+AC_SUBST(lispdir)
+AC_SUBST(locallisppath)
+AC_SUBST(lisppath)
+AC_SUBST(etcdir)
+AC_SUBST(lockdir)
+AC_SUBST(archlibdir)
+AC_SUBST(docdir)
+AC_SUBST(c_switch_system)
+AC_SUBST(c_switch_machine)
+AC_SUBST(LD_SWITCH_X_SITE)
+AC_SUBST(LD_SWITCH_X_SITE_AUX)
+AC_SUBST(C_SWITCH_X_SITE)
+AC_SUBST(CFLAGS)
+AC_SUBST(X_TOOLKIT_TYPE)
+AC_SUBST(machfile)
+AC_SUBST(opsysfile)
+
+AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION,  "${configuration}")
+AC_DEFINE_UNQUOTED(config_machfile,  "${machfile}")
+AC_DEFINE_UNQUOTED(config_opsysfile, "${opsysfile}")
+AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, ${LD_SWITCH_X_SITE})
+AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, ${LD_SWITCH_X_SITE_AUX})
+AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE,  ${C_SWITCH_X_SITE})
+AC_DEFINE_UNQUOTED(UNEXEC_SRC,       ${UNEXEC_SRC})
+
+if test "${HAVE_X_WINDOWS}" = "yes" ; then
+  AC_DEFINE(HAVE_X_WINDOWS)
+fi
+if test "${USE_X_TOOLKIT}" != "none" ; then
+  AC_DEFINE(USE_X_TOOLKIT)
+fi
+if test "${HAVE_X11}" = "yes" ; then
+  AC_DEFINE(HAVE_X11)
+fi
+if test "${HAVE_XFREE386}" = "yes" ; then
+  AC_DEFINE(HAVE_XFREE386)
+fi
+if test "${HAVE_X_MENU}" = "yes" ; then
+  AC_DEFINE(HAVE_X_MENU)
+fi
+if test "${GNU_MALLOC}" = "yes" ; then
+  AC_DEFINE(GNU_MALLOC)
+fi
+if test "${REL_ALLOC}" = "yes" ; then
+  AC_DEFINE(REL_ALLOC)
+fi
+if test "${LISP_FLOAT_TYPE}" = "yes" ; then
+  AC_DEFINE(LISP_FLOAT_TYPE)
+fi
+
+# ====================== Developer's configuration =======================
+
+# The following assignments make sense if you're running Emacs on a single
+# machine, one version at a time, and  you want changes to the lisp and etc
+# directories in the source tree to show up immediately in your working
+# environment.  It saves a great deal of disk space by not duplicating the
+# lisp and etc directories.
+
+if test "$enable_in_place" = "yes"; then
+   lispdir='${srcdir}/lisp'
+   locallisppath='${srcdir}/site-lisp'
+   etcdir='${srcdir}/etc'
+   lockdir='${srcdir}/lock'
+   # We used to make archlibdir and docdir absolute,
+   # but that caused trouble with automounters.
+   archlibdir='${srcdir}/lib-src'
+   docdir='${srcdir}/etc'
+   infodir='${srcdir}/info'
+elif test "$enable_single_tree" = "yes"; then
+   bindir='${exec_prefix}/bin/${configuration}'
+   datadir='${prefix}/common'
+   statedir='${prefix}/common'
+   libdir='${bindir}'
+   lispdir='${prefix}/common/lisp'
+   locallisppath='${prefix}/common/site-lisp'
+   lockdir='${prefix}/common/lock'
+   archlibdir='${libdir}/etc'
+   etcdir='${prefix}/common/data'
+   docdir='${prefix}/common/data'
+fi
+
+#### Report on what we decided to do.
+echo "
+
+Configured for \`${canonical}'.
+
+  Where should the build process find the source code?    ${srcdir}
+  What operating system and machine description files should Emacs use?
+        \`${opsysfile}' and \`${machfile}'
+  What compiler should emacs be built with?               ${CC} ${CFLAGS}
+  Should Emacs use the GNU version of malloc?             ${GNU_MALLOC}${GNU_MALLOC_reason}
+  Should Emacs use the relocating allocator for buffers?  ${REL_ALLOC}
+  What window system should Emacs use?                    ${window_system}
+  What toolkit should Emacs use?                          ${USE_X_TOOLKIT}${x_includes+
+  Where do we find X Windows header files?                }${x_includes}${x_libraries+
+  Where do we find X Windows libraries?                   }${x_libraries}
+
+"
+
+# Remove any trailing slashes in these variables.
+changequote(, )dnl
+test "${prefix}" != NONE &&
+  prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'`
+test "${exec_prefix}" != NONE &&
+  exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`
+changequote([, ])dnl
+
+save_no_create="$no_create"
+no_create=yes
+
+AC_OUTPUT(Makefile lib-src/Makefile.in oldXMenu/Makefile lwlib/Makefile src/Makefile.in)
+
+cat >> ${CONFIG_STATUS} <<EOF
+CPP="$CPP" CPPFLAGS="$CPPFLAGS"
+EOF
+
+cat >> ${CONFIG_STATUS} <<\EOF
+
+### Make the necessary directories, if they don't exist.
+for dir in ./src ./lib-src ./cpp ./oldXMenu ./lwlib ./etc ; do
+  if test ! -d ${dir}; then
+    mkdir ${dir}
+  fi
+done
+
+# Build src/Makefile from ${srcdir}/src/Makefile.in.  This must be done
+# after src/config.h is built, since we rely on that file.
+
+changequote(,)dnl The horror, the horror.
+# Now get this: Some word that is part of the ${srcdir} directory name
+# or the ${configuration} value might, just might, happen to be an
+# identifier like `sun4' or `i386' or something, and be predefined by
+# the C preprocessor to some helpful value like 1, or maybe the empty
+# string.  Needless to say consequent macro substitutions are less
+# than conducive to the makefile finding the correct directory.
+undefs="`echo $top_srcdir $configuration $canonical |
+sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/  *$//' \
+    -e 's/  */ -U/g' -e 's/-U[0-9][^ ]*//g' \
+`"
+changequote([,])dnl
+
+echo creating lib-src/Makefile
+( cd lib-src
+  rm -f junk.c junk1.c junk2.c
+  sed -e '/start of cpp stuff/q' \
+      < Makefile.in > junk1.c
+  sed -e '1,/start of cpp stuff/d'\
+      -e 's@/\*\*/#\(.*\)$@/* \1 */@' \
+      < Makefile.in > junk.c
+  $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \
+      sed -e 's/^ /	/' -e '/^#/d' -e '/^[ 	]*$/d' > junk2.c
+  cat junk1.c junk2.c > Makefile.new
+  rm -f junk.c junk1.c junk2.c
+  chmod 444 Makefile.new
+  mv -f Makefile.new Makefile
+)
+
+echo creating src/Makefile
+( cd src
+  rm -f junk.c junk1.c junk2.c
+  sed -e '/start of cpp stuff/q' \
+      < Makefile.in > junk1.c
+  sed -e '1,/start of cpp stuff/d'\
+      -e 's@/\*\*/#\(.*\)$@/* \1 */@' \
+      < Makefile.in > junk.c
+  $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \
+      sed -e 's/^ /	/' -e '/^#/d' -e '/^[ 	]*$/d' > junk2.c
+  cat junk1.c junk2.c > Makefile.new
+  rm -f junk.c junk1.c junk2.c
+  chmod 444 Makefile.new
+  mv -f Makefile.new Makefile
+)
+EOF
+
+test "$save_no_create" = yes || ${CONFIG_SHELL-/bin/sh} ${CONFIG_STATUS}