changeset 69:0355ba998550

Initial revision
author Robert J. Chassell <bob@rattlesnake.com>
date Thu, 28 Jun 1990 21:32:49 +0000
parents 7680293d57f3
children 28fb18d48c35
files lisp/textmodes/texinfo.el
diffstat 1 files changed, 408 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lisp/textmodes/texinfo.el	Thu Jun 28 21:32:49 1990 +0000
@@ -0,0 +1,408 @@
+; Major mode for editing texinfo files.
+;; Copyright (C) 1985, 1988, 1989 Free Software Foundation, Inc.
+
+;; This file is part of GNU Emacs.
+
+;; GNU Emacs is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 1, or (at your option)
+;; any later version.
+
+;; GNU Emacs is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GNU Emacs; see the file COPYING.  If not, write to
+;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+(require 'texnfo-upd)
+(require 'tex-mode)
+
+(defvar texinfo-mode-syntax-table nil)
+
+(if texinfo-mode-syntax-table
+    nil
+  (setq texinfo-mode-syntax-table (make-syntax-table))
+  (modify-syntax-entry ?\" " " texinfo-mode-syntax-table)
+  (modify-syntax-entry ?\\ " " texinfo-mode-syntax-table)
+  (modify-syntax-entry ?@ "\\" texinfo-mode-syntax-table)
+  (modify-syntax-entry ?\^q "\\" texinfo-mode-syntax-table)
+  (modify-syntax-entry ?\[ "(]" texinfo-mode-syntax-table)
+  (modify-syntax-entry ?\] ")[" texinfo-mode-syntax-table)
+  (modify-syntax-entry ?{ "(}" texinfo-mode-syntax-table)
+  (modify-syntax-entry ?} "){" texinfo-mode-syntax-table)
+  (modify-syntax-entry ?\' "w" texinfo-mode-syntax-table))
+
+(defvar texinfo-mode-map nil)
+
+;; Mode documentation displays commands in reverse order 
+;; from how they are listed in the texinfo-mode-map.
+(if texinfo-mode-map
+    nil
+  (setq texinfo-mode-map (make-sparse-keymap))
+
+  (define-key texinfo-mode-map "\C-c\C-k"    'tex-kill-job)
+  (define-key texinfo-mode-map "\C-c\C-l"    'tex-recenter-output-buffer)
+  (define-key texinfo-mode-map "\C-c\C-q"    'tex-show-print-queue)
+  (define-key texinfo-mode-map "\C-c\C-p"    'texinfo-tex-print)
+  (define-key texinfo-mode-map "\C-c\C-i"    'texinfo-texindex)
+  (define-key texinfo-mode-map "\C-c\C-t"    'texinfo-tex-buffer)
+  (define-key texinfo-mode-map "\C-c\C-r"    'texinfo-tex-region)
+
+  (define-key texinfo-mode-map "\C-c\C-f"    'texinfo-format-region)
+  (define-key texinfo-mode-map "\C-c\C-b"    'texinfo-format-buffer)
+
+  (define-key texinfo-mode-map "\C-c\C-um"   'texinfo-make-menu)
+  (define-key texinfo-mode-map "\C-c\C-un"   'texinfo-update-node)
+  (define-key texinfo-mode-map "\C-c\C-ue"   'texinfo-every-node-update)
+  (define-key texinfo-mode-map "\C-c\C-ua"   'texinfo-all-menus-update)
+
+  (define-key texinfo-mode-map "\C-c\C-s"     'texinfo-show-structure)
+
+  (define-key texinfo-mode-map "\e}"          'up-list)
+  (define-key texinfo-mode-map "\e{"          'texinfo-insert-braces)
+
+  (define-key texinfo-mode-map "\C-c\C-cv"    'texinfo-insert-@var)
+  (define-key texinfo-mode-map "\C-c\C-cs"    'texinfo-insert-@samp)
+  (define-key texinfo-mode-map "\C-c\C-co"    'texinfo-insert-@noindent)
+  (define-key texinfo-mode-map "\C-c\C-cn"    'texinfo-insert-@node)
+  (define-key texinfo-mode-map "\C-c\C-ck"    'texinfo-insert-@kbd)
+  (define-key texinfo-mode-map "\C-c\C-ci"    'texinfo-insert-@item)
+  (define-key texinfo-mode-map "\C-c\C-cx"    'texinfo-insert-@example)
+  (define-key texinfo-mode-map "\C-c\C-ce"    'texinfo-insert-@end-example)
+  (define-key texinfo-mode-map "\C-c\C-cd"    'texinfo-insert-@dfn)
+  (define-key texinfo-mode-map "\C-c\C-cc"    'texinfo-insert-@code))
+
+(defun texinfo-insert-@var ()
+  "Insert the string @var in a texinfo buffer."
+  (interactive)
+  (insert "@var{}")
+  (backward-char))
+
+(defun texinfo-insert-@samp ()
+  "Insert the string @samp in a texinfo buffer."
+  (interactive)
+  (insert "@samp{}")
+  (backward-char))
+
+(defun texinfo-insert-@noindent ()
+  "Insert the string @noindent in a texinfo buffer."
+  (interactive)
+  (insert "@noindent\n"))
+
+(defun texinfo-insert-@node ()
+  "Insert the string @node in a texinfo buffer, 
+along with a comment indicating the arguments to @node."
+  (interactive)
+  (insert "@node \n@comment  node-name,  next,  previous,  up")
+  (forward-line -1)
+  (forward-char 6))
+
+(defun texinfo-insert-@kbd ()
+  "Insert the string @kbd in a texinfo buffer."
+  (interactive)
+  (insert "@kbd{}")
+  (backward-char))
+
+(defun texinfo-insert-@item ()
+  "Insert the string @item in a texinfo buffer."
+  (interactive)
+  (insert "@item")
+  (newline))
+
+(defun texinfo-insert-@example ()
+  "Insert the string @example in a texinfo buffer."
+  (interactive)
+  (insert "@example\n"))
+
+(defun texinfo-insert-@end-example ()
+  "Insert the string @end example in a texinfo buffer."
+  (interactive)
+  (insert "@end example\n"))
+
+(defun texinfo-insert-@dfn ()
+  "Insert the string @dfn in a texinfo buffer."
+  (interactive)
+  (insert "@dfn{}")
+  (backward-char))
+
+(defun texinfo-insert-@code ()
+  "Insert the string @code in a texinfo buffer."
+  (interactive)
+  (insert "@code{}")
+  (backward-char))
+
+(defun texinfo-insert-braces ()
+  "Make a pair of braces and be poised to type inside of them.
+Use \\[up-list] to move forward out of the braces."
+  (interactive)
+  (insert "{}")
+  (backward-char))
+
+(defun texinfo-mode ()
+  "Major mode for editing texinfo files.
+
+  It has these extra commands:
+\\{texinfo-mode-map}
+
+  These are files that are used as input for tex to make printed manuals
+and also to be turned into Info files by \\[texinfo-format-buffer].
+These files must be written in a very restricted and modified version
+of tex input format.
+
+  Editing commands are like text-mode except that the syntax table is
+set up so expression commands skip texinfo bracket groups.  To see
+what the Info version of a region of the texinfo file will look like,
+use \\[texinfo-format-region].  This command runs Info on the current region
+of the texinfo file and formats it properly.
+
+  You can show the structure of a texinfo file with \\[texinfo-show-structure].
+This command shows the structure of a texinfo file by listing the
+lines with the @-sign commands for @node, @chapter, @section and the
+like.  These lines are displayed in another window called the *Occur*
+window.  In that window, you can position the cursor over one of the
+lines and use \\[occur-mode-goto-occurrence], to jump to the
+corresponding spot in the texinfo file.
+
+  In addition, texinfo mode provides commands that insert various
+frequently used @-sign commands into the buffer.  You can use these
+commands to save keystrokes.  And you can insert balanced braces with
+\\[texinfo-insert-braces] and later use the command \\[up-list] to
+move forward past the closing brace.
+
+Also, texinfo mode provides functions for automatically creating or
+updating menus and node pointers.  These functions
+
+  * insert the `Next', `Previous' and `Up' pointers of a node,
+  * insert or update the menu for a section, and
+  * create a master menu for a texinfo source file.
+
+Here are the functions:
+
+    texinfo-update-node                \\[texinfo-update-node]
+    texinfo-every-node-update          \\[texinfo-every-node-update]
+    texinfo-sequential-node-update 
+
+    texinfo-make-menu                  \\[texinfo-make-menu]
+    texinfo-all-menus-update           \\[texinfo-all-menus-update]
+    texinfo-master-menu
+
+    texinfo-indent-menu-description (column &optional region-p)
+
+The `texinfo-column-for-description' variable specifies the column to
+which menu descriptions are indented. 
+
+Passed an argument (a prefix argument, if interactive), the
+`texinfo-update-node' and `texinfo-make-menu' functions do their jobs
+in the region.
+
+To use the updating commands, you must structure your texinfo file
+hierarchically, such that each `@node' line, with the exception of the
+top node, is accompanied by some kind of section line, such as an
+`@chapter' or `@section' line.
+
+If the file has a `top' node, it must be called `top' or `Top' and
+be the first node in the file.
+
+Entering texinfo mode calls the value of text-mode-hook, and then the
+value of texinfo-mode-hook."
+  (interactive)
+  (text-mode)
+  (setq mode-name "texinfo")
+  (setq major-mode 'texinfo-mode)
+  (use-local-map texinfo-mode-map)
+  (set-syntax-table texinfo-mode-syntax-table)
+  (make-local-variable 'require-final-newline)
+  (setq require-final-newline t)
+  (make-local-variable 'paragraph-separate)
+  (setq paragraph-separate (concat "^\b\\|^@[a-zA-Z]*[ \n]\\|" paragraph-separate))
+  (make-local-variable 'paragraph-start)
+  (setq paragraph-start (concat "^\b\\|^@[a-zA-Z]*[ \n]\\|" paragraph-start))
+  (make-local-variable 'fill-column)
+  (setq fill-column 72)
+  (make-local-variable 'comment-start)
+  (setq comment-start "@c ")
+  (make-local-variable 'comment-start-skip)
+  (setq comment-start-skip "@c +")
+  (make-local-variable 'words-include-escapes)
+  (setq words-include-escapes t)
+  (make-local-variable 'tex-start-of-header)
+  (setq tex-start-of-header "%**start of header")
+  (make-local-variable 'tex-end-of-header)
+  (setq tex-end-of-header "%**end of header")
+  (make-local-variable 'tex-trailer)
+  (setq tex-trailer "@bye\n")
+  (run-hooks 'text-mode-hook 'texinfo-mode-hook))
+
+
+(defvar texinfo-heading-pattern
+  "^@\\(chapter\\|unnum\\|appendix\\|sect\\|sub\\|heading\\|major\\|node\\)"
+  "Regexp matching @node and chapter, section, and other headings.")
+
+; The following is defined in `texnfo-upd.el'
+; (defvar texinfo-section-types-regexp
+;   "^@\\(chapter \\|sect\\|sub\\|unnum\\|major\\|heading \\|appendix\\)"
+;   "Regexp matching chapter, section, other headings (but not the top node).")
+
+(defun texinfo-show-structure (&optional sections-only) 
+  "Show the structure of a Texinfo file.
+With optional argument (prefix if interactive), list lines with @-sign
+commands for @chapter, @section and the like.  With no argument, list
+both the lines with @-sign commands for @chapter, @section and the
+like and list @node lines.
+
+Lines with structuring commands beginning in them are displayed in
+another window called the *Occur* window.  In that window, you can
+position the cursor over one of the lines and use
+\\[occur-mode-goto-occurrence], to jump to the corresponding spot in
+the texinfo file."
+
+  (interactive "P")
+  (save-excursion 
+    (goto-char (point-min))
+    (if sections-only
+        (occur texinfo-section-types-regexp)
+      (occur texinfo-heading-pattern)))
+  (pop-to-buffer "*Occur*")
+  (goto-char (point-min))
+  (flush-lines "-----"))
+
+
+;;; texinfo mode tex and hardcopy printing commands.
+
+;; These commands are for running tex on a region of a texinfo file in
+;; GNU Emacs, or on the whole buffer, and for printing the resulting
+;; .dvi file.  The three commands are:
+
+; texinfo-tex-region    to run tex on the current region.
+; texinfo-tex-buffer    to run tex on the current buffer.
+; texinfo-tex-print     to print the .dvi file made by tex
+
+;;; Other useful functions
+
+; These functions are provided by `tex-mode.el' but are bound to keys
+; in texinfo mode.
+
+; tex-kill-job                  to kill the currently running tex job
+; tex-recenter-output-buffer    to redisplay tex job output buffer
+; tex-show-print-queue          to show the print queue
+
+; Various variables are provided by `tex-mode.el'
+
+; tex mode variable         Default Value 
+
+; tex-dvi-print-command         "lpr -d"
+; tex-directory                 "/tmp/"   
+; tex-show-queue-command        "lpq"     
+; tex-shell-cd-command          "cd"      
+; tex-zap-file                  nil   (created  as needed)
+
+
+;;; The  tex  and  print  function definitions:
+
+(defvar texinfo-tex-command "tex"
+  "*Command used by  texinfo-tex-region  to run tex on a region.")
+
+(defvar texinfo-texindex-command "texindex"
+  "*Command used by  texinfo-texindex  to sort unsorted index files.")
+
+(defun texinfo-tex-region (beg end)
+  "Run tex on the current region.  A temporary file (tex-zap-file) is
+written in directory tex-directory, and tex is run in that directory.
+The first line of the file is copied to the temporary file; and
+if the buffer has a header, it is written to the temporary file before
+the region itself.  The buffer's header is all lines between the
+strings defined by tex-start-of-header and tex-end-of-header
+inclusive.  The header must start in the first 100 lines.  The value
+of tex-trailer is appended to the temporary file after the region."
+  (interactive "r")
+  (if (get-buffer "*tex-shell*")
+      (tex-kill-job)
+    (tex-start-shell))
+  (or tex-zap-file (setq tex-zap-file (make-temp-name "#tz")))
+  (let ((tex-out-file (concat tex-zap-file ".tex"))
+	(temp-buffer (get-buffer-create " tex-Output-Buffer"))
+	(zap-directory
+         (file-name-as-directory (expand-file-name tex-directory))))
+    (save-excursion
+      (save-restriction
+	(widen)
+	(goto-char (point-min))
+	(forward-line 100)
+	(let ((search-end (point))
+	      (hbeg (point-min)) (hend (point-min))
+	      (default-directory zap-directory))
+	  (goto-char (point-min))
+          
+          ;; Copy first line, the `\input texinfo' line, to temp file
+	  (write-region (point) 
+                        (save-excursion (end-of-line) (point))
+                        tex-out-file nil nil)
+          
+          ;; Don't copy first line twice if region includes it.
+          (forward-line 1)
+          (if (< beg (point)) (setq beg (point)))
+          
+          ;; Initialize the temp file with either the header or nothing
+          (if (search-forward tex-start-of-header search-end t)
+              (progn
+                (beginning-of-line)
+                (setq hbeg (point))	; Mark beginning of header.
+                (if (search-forward tex-end-of-header nil t)
+                    (progn (beginning-of-line)
+                           (setq hend (point)))	; Mark end of header.
+                  (setq hbeg (point-min))))) ; Else no header.
+          
+          ;; Copy  header  to temp file.
+          (write-region (min hbeg beg) hend tex-out-file t nil)
+          
+          ;; Copy  region  to temp file.
+          (write-region (max beg hend) end tex-out-file t nil))
+        
+        ;; This is  a kludge to insert the tex-trailer into the tex-out-file.
+        ;;  We have to create a special buffer in which to insert
+        ;;  the tex-trailer first because there is no function with
+        ;;  which to append a literal string directly to a file.
+        (let ((local-tex-trailer tex-trailer))
+          (set-buffer temp-buffer)
+          (erase-buffer)
+          ;; make sure trailer isn't hidden by a comment
+          (insert-string "\n")
+          (if local-tex-trailer (insert-string local-tex-trailer))
+          (set-buffer-directory temp-buffer zap-directory)
+          (write-region (point-min) (point-max) tex-out-file t nil))))
+    
+    (set-buffer-directory "*tex-shell*" zap-directory)
+    (send-string "tex-shell" (concat tex-shell-cd-command " "
+                                     zap-directory "\n"))
+    (send-string "tex-shell" (concat texinfo-tex-command " "
+                                     tex-out-file "\n")))
+  (tex-recenter-output-buffer 0))
+
+(defun texinfo-tex-buffer ()
+  "Run tex on current buffer.  
+See \\[texinfo-tex-region] for more information."
+  (interactive)
+  (texinfo-tex-region (point-min) (point-max)))
+
+(defun texinfo-texindex ()
+  "Run texindex on unsorted index files.
+The index files are made by \\[texinfo-tex-region] or \\[texinfo-tex-buffer].
+Runs the shell command defined by texinfo-texindex-command."
+  (interactive)
+  (send-string "tex-shell"
+	       (concat texinfo-texindex-command
+                       " " tex-zap-file ".??" "\n"))
+  (tex-recenter-output-buffer nil))
+
+(defun texinfo-tex-print ()
+  "Print .dvi file made by \\[texinfo-tex-region] or \\[texinfo-tex-buffer].
+Runs the shell command defined by tex-dvi-print-command."
+  (interactive)
+  (send-string "tex-shell"
+	       (concat tex-dvi-print-command
+                       " " tex-zap-file ".dvi" "\n"))
+  (tex-recenter-output-buffer nil))
+