changeset 51051:b39d8ed2d159

(with-selected-window): New macro. (dolist, dotimes, with-current-buffer): Use backquotes. (when, unless, save-match-data, combine-after-change-calls) (with-output-to-string, with-temp-buffer): Add `declare' info. (listify-key-sequence): Don't allocate unnecessarily. (read-quoted-char): Allow up to base 36. (prepare-change-group): Remove unimplemented argument.
author Stefan Monnier <monnier@iro.umontreal.ca>
date Sat, 17 May 2003 22:00:40 +0000
parents 5b8ca57f20c3
children 322e59c8a00c
files lisp/subr.el
diffstat 1 files changed, 52 insertions(+), 31 deletions(-) [+]
line wrap: on
line diff
--- a/lisp/subr.el	Sat May 17 21:19:55 2003 +0000
+++ b/lisp/subr.el	Sat May 17 22:00:40 2003 +0000
@@ -95,41 +95,48 @@
 
 (defmacro when (cond &rest body)
   "If COND yields non-nil, do BODY, else return nil."
+  (declare (indent 1) (debug t))
   (list 'if cond (cons 'progn body)))
 
 (defmacro unless (cond &rest body)
   "If COND yields nil, do BODY, else return nil."
+  (declare (indent 1) (debug t))
   (cons 'if (cons cond (cons nil body))))
 
 (defmacro dolist (spec &rest body)
-  "(dolist (VAR LIST [RESULT]) BODY...): loop over a list.
+  "Loop over a list.
 Evaluate BODY with VAR bound to each car from LIST, in turn.
-Then evaluate RESULT to get return value, default nil."
+Then evaluate RESULT to get return value, default nil.
+
+\(dolist (VAR LIST [RESULT]) BODY...)"
+  (declare (indent 1) (debug ((symbolp form &optional form) body)))
   (let ((temp (make-symbol "--dolist-temp--")))
-    (list 'let (list (list temp (nth 1 spec)) (car spec))
-	  (list 'while temp
-		(list 'setq (car spec) (list 'car temp))
-		(cons 'progn
-		      (append body
-			      (list (list 'setq temp (list 'cdr temp))))))
-	  (if (cdr (cdr spec))
-	      (cons 'progn
-		    (cons (list 'setq (car spec) nil) (cdr (cdr spec))))))))
+    `(let ((,temp ,(nth 1 spec))
+	   ,(car spec))
+       (while ,temp
+	 (setq ,(car spec) (car ,temp))
+	 (setq ,temp (cdr ,temp))
+	 ,@body)
+       ,@(if (cdr (cdr spec))
+	     `((setq ,(car spec) nil) ,@(cdr (cdr spec)))))))
 
 (defmacro dotimes (spec &rest body)
-  "(dotimes (VAR COUNT [RESULT]) BODY...): loop a certain number of times.
+  "Loop a certain number of times.
 Evaluate BODY with VAR bound to successive integers running from 0,
 inclusive, to COUNT, exclusive.  Then evaluate RESULT to get
-the return value (nil if RESULT is omitted)."
-  (let ((temp (make-symbol "--dotimes-temp--")))
-    (list 'let (list (list temp (nth 1 spec)) (list (car spec) 0))
-	   (list 'while (list '< (car spec) temp)
-		 (cons 'progn
-		       (append body (list (list 'setq (car spec)
-						(list '1+ (car spec)))))))
-	   (if (cdr (cdr spec))
-	       (car (cdr (cdr spec)))
-	     nil))))
+the return value (nil if RESULT is omitted).
+
+\(dotimes (VAR COUNT [RESULT]) BODY...)"
+  (declare (indent 1) (debug dolist))
+  (let ((temp (make-symbol "--dotimes-temp--"))
+	(start 0)
+	(end (nth 1 spec)))
+    `(let ((,temp ,end)
+	   (,(car spec) ,start))
+       (while (< ,(car spec) ,temp)
+	 ,@body
+	 (setq ,(car spec) (1+ ,(car spec))))
+       ,@(cdr (cdr spec)))))
 
 (defsubst caar (x)
   "Return the car of the car of X."
@@ -204,8 +211,9 @@
     (delete elt (copy-sequence seq))))
 
 (defun remq (elt list)
-  "Return a copy of LIST with all occurrences of ELT removed.
-The comparison is done with `eq'."
+  "Return LIST with all occurrences of ELT removed.
+The comparison is done with `eq'.  Contrary to `delq', this does not use
+side-effects, and the argument LIST is not modified."
   (if (memq elt list)
       (delq elt (copy-sequence list))
     list))
@@ -565,7 +573,7 @@
 			(if (> c 127)
 			    (logxor c listify-key-sequence-1)
 			  c)))
-	    (append key nil))))
+	    key)))
 
 (defsubst eventp (obj)
   "True if the argument is an event object."
@@ -1140,7 +1148,7 @@
 	     (setq code (+ (* code read-quoted-char-radix) (- translated ?0)))
 	     (and prompt (setq prompt (message "%s %c" prompt translated))))
 	    ((and (<= ?a (downcase translated))
-		  (< (downcase translated) (+ ?a -10 (min 26 read-quoted-char-radix))))
+		  (< (downcase translated) (+ ?a -10 (min 36 read-quoted-char-radix))))
 	     (setq code (+ (* code read-quoted-char-radix)
 			   (+ 10 (- (downcase translated) ?a))))
 	     (and prompt (setq prompt (message "%s %c" prompt translated))))
@@ -1230,9 +1238,8 @@
 	     (accept-change-group ,handle)
 	   (cancel-change-group ,handle))))))
 
-(defun prepare-change-group (&optional buffer)
+(defun prepare-change-group ()
   "Return a handle for the current buffer's state, for a change group.
-If you specify BUFFER, make a handle for BUFFER's state instead.
 
 Pass the handle to `activate-change-group' afterward to initiate
 the actual changes of the change group.
@@ -1598,9 +1605,19 @@
   "Execute the forms in BODY with BUFFER as the current buffer.
 The value returned is the value of the last form in BODY.
 See also `with-temp-buffer'."
-  (cons 'save-current-buffer
-	(cons (list 'set-buffer buffer)
-	      body)))
+  (declare (indent 1) (debug t))
+  `(save-current-buffer
+     (set-buffer ,buffer)
+     ,@body))
+
+(defmacro with-selected-window (window &rest body)
+  "Execute the forms in BODY with WINDOW as the selected window.
+The value returned is the value of the last form in BODY.
+See also `with-temp-buffer'."
+  (declare (indent 1) (debug t))
+  `(save-selected-window
+     (select-window ,window 'norecord)
+     ,@body))
 
 (defmacro with-temp-file (file &rest body)
   "Create a new buffer, evaluate BODY there, and write the buffer to FILE.
@@ -1646,6 +1663,7 @@
 (defmacro with-temp-buffer (&rest body)
   "Create a temporary buffer, and evaluate BODY there like `progn'.
 See also `with-temp-file' and `with-output-to-string'."
+  (declare (indent 0) (debug t))
   (let ((temp-buffer (make-symbol "temp-buffer")))
     `(let ((,temp-buffer
 	    (get-buffer-create (generate-new-buffer-name " *temp*"))))
@@ -1657,6 +1675,7 @@
 
 (defmacro with-output-to-string (&rest body)
   "Execute BODY, return the text it sent to `standard-output', as a string."
+  (declare (indent 0) (debug t))
   `(let ((standard-output
 	  (get-buffer-create (generate-new-buffer-name " *string-output*"))))
      (let ((standard-output standard-output))
@@ -1686,6 +1705,7 @@
 
 Do not alter `after-change-functions' or `before-change-functions'
 in BODY."
+  (declare (indent 0) (debug t))
   `(unwind-protect
        (let ((combine-after-change-calls t))
 	 . ,body)
@@ -1760,6 +1780,7 @@
   ;; It is better not to use backquote here,
   ;; because that makes a bootstrapping problem
   ;; if you need to recompile all the Lisp files using interpreted code.
+  (declare (indent 0) (debug t))
   (list 'let
 	'((save-match-data-internal (match-data)))
 	(list 'unwind-protect