Mercurial > gftp.yaz
view docs/sample.gftp/gftprc @ 914:8961a1a5c96b
Updated Spanish translation
author | jorgegonz |
---|---|
date | Tue, 24 Apr 2007 22:40:07 +0000 |
parents | 04aff709924a |
children | afea4eaec5f0 |
line wrap: on
line source
# Config file for gFTP. Copyright (C) 1998-2003 Brian Masney # <masneyb@gftp.org>. Warning: Any comments that you add to this file WILL be # overwritten. If a entry has a (*) in it's comment, you can't change it # inside gFTP # The default program used to view files. If this is blank, the internal file # viewer will be used view_program= # The default program used to edit files. edit_program= # The default directory gFTP will go to on startup startup_directory= # The maximum size of the log window in bytes for the GTK+ port max_log_window_size=5000 # This is a comma separated list of charsets to try to convert the remote # messages to the current locale remote_charsets= # This is the value of LC_TIME for the remote site. This is so that dates can # be parsed properly in the directory listings. remote_lc_time= # The number of seconds to keep cache entries before they expire. cache_ttl=3600 # Append new file transfers onto existing ones append_transfers=1 # Do only one transfer at a time? one_transfer=1 # Overwrite files by default or set to resume file transfers overwrite_default=0 # Preserve file permissions of transfered files preserve_permissions=1 # Preserve file times of transfered files preserve_time=1 # Refresh the listbox after each file is transfered refresh_files=0 # Put the directories first then the files sort_dirs_first=1 # Show hidden files in the listboxes show_hidden_files=1 # Show the file transfer status in the titlebar show_trans_in_title=0 # Automatically start the file transfers when they get queued start_transfers=1 # Allow entering manual commands in the GUI (functions like the text port) cmd_in_gui=0 # The timeout waiting for network input/output. This is NOT an idle timeout. network_timeout=120 # The number of auto-retries to do. Set this to 0 to retry indefinitely retries=3 # The number of seconds to wait between retries sleep_time=30 # The maximum KB/s a file transfer can get. (Set to 0 to disable) maxkbs=0.00 # The block size that is used when transfering files. This should be a # multiple of 1024. trans_blksize=20480 # This specifies the default protocol to use default_protocol=FTP # Enable IPv6 support enable_ipv6=1 # This defines what will happen when you double click a file in the file # listboxes. 0=View file 1=Edit file 2=Transfer file list_dblclk_action=2 # The default width of the local files listbox listbox_local_width=318 # The default width of the remote files listbox listbox_remote_width=320 # The default height of the local/remote files listboxes listbox_file_height=265 # The default height of the transfer listbox transfer_height=80 # The default height of the logging window log_height=105 # The width of the filename column in the transfer window. Set this to 0 to # have this column automagically resize. file_trans_column=100 # The default column to sort by local_sortcol=file # Sort ascending or descending local_sortasds=ascending # The default column to sort by remote_sortcol=file # Sort ascending or descending remote_sortasds=ascending # The width of the filename column in the file listboxes. Set this to 0 to # have this column automagically resize. Set this to -1 to disable this column local_file_width=100 # The width of the size column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column local_size_width=85 # The width of the user column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column local_user_width=75 # The width of the group column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column local_group_width=76 # The width of the date column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column local_date_width=120 # The width of the attribs column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column local_attribs_width=75 # The width of the filename column in the file listboxes. Set this to 0 to # have this column automagically resize. Set this to -1 to disable this column remote_file_width=100 # The width of the size column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column remote_size_width=85 # The width of the user column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column remote_user_width=75 # The width of the group column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column remote_group_width=76 # The width of the date column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column remote_date_width=120 # The width of the attribs column in the file listboxes. Set this to 0 to have # this column automagically resize. Set this to -1 to disable this column remote_attribs_width=75 # The color of the commands that are sent to the server send_color=0:8600:0 # The color of the commands that are received from the server recv_color=0:0:ffff # The color of the error messages error_color=ffff:0:0 # The color of the rest of the log messages misc_color=a000:8d00:4600 # This is the password that will be used whenever you log into a remote FTP # server as anonymous email= # Firewall hostname ftp_proxy_host= # Port to connect to on the firewall ftp_proxy_port=21 # Your firewall username ftp_proxy_username= # Your firewall password ftp_proxy_password= # Your firewall account (optional) ftp_proxy_account= # This specifies how your proxy server expects us to log in. You can specify a # 2 character replacement string prefixed by a % that will be replaced with # the proper data. The first character can be either p for proxy or h for the # host of the FTP server. The second character can be u (user), p (pass), h # (host), o (port) or a (account). For example, to specify the proxy user, you # can you type in %pu proxy_config= # If this is enabled, then the remote FTP server will open up a port for the # data connection. If you are behind a firewall, you will need to enable this. # Generally, it is a good idea to keep this enabled unless you are connecting # to an older FTP server that doesn't support this. If this is disabled, then # gFTP will open up a port on the client side and the remote server will # attempt to connect to it. passive_transfer=1 # The remote FTP server will attempt to resolve symlinks in the directory # listings. Generally, this is a good idea to leave enabled. The only time you # will want to disable this is if the remote FTP server doesn't support the -L # option to LIST resolve_symlinks=1 # If you are transfering a text file from Windows to UNIX box or vice versa, # then you should enable this. Each system represents newlines differently for # text files. If you are transfering from UNIX to UNIX, then it is safe to # leave this off. If you are downloading binary data, you will want to disable # this. ascii_transfers=0 # SSL entropy file entropy_source=/dev/urandom # The maximum number of bytes to seed the SSL engine with entropy_len=1024 # Verify SSL Peer verify_ssl_peer=1 # Firewall hostname http_proxy_host= # Port to connect to on the firewall http_proxy_port=80 # Your firewall username http_proxy_username= # Your firewall password http_proxy_password= # Do you want to use HTTP/1.1 or HTTP/1.0 use_http11=1 # The path to the SSH executable ssh_prog_name= # Extra parameters to pass to the SSH program ssh_extra_params= # Require a username/password for SSH connections ssh_need_userpass=1 # This section specifies which hosts are on the local subnet and won't need to # go out the proxy server (if available). Syntax: dont_use_proxy=.domain or # dont_use_proxy=network number/netmask # ext=file extenstion:XPM file:Ascii or Binary (A or B):viewer program. Note: # All arguments except the file extension are optional ext=.pdf::B:xpdf ext=.rpm:rpm.xpm:B: ext=.deb:deb.xpm:B: ext=.diff:diff.xpm: : ext=.htm:world.xpm:A: ext=.html:world.xpm:A: ext=.xcf:img.xpm:B: ext=.psd:img.xpm:B: ext=.xpm:img.xpm:B: ext=.bmp:img.xpm:B: ext=.tif:img.xpm:B: ext=.tiff:img.xpm:B: ext=.png:img.xpm:B: ext=.jpg:img.xpm:B: ext=.mp3:sound.xpm:B: ext=.mid:sound.xpm:B: ext=.wav:sound.xpm:B: ext=.bz2:tar.xpm:B: ext=.gz:tar.xpm:B: ext=.1:man.xpm:B:xman ext=.2:man.xpm:B:xman ext=.3:man.xpm:B:xman ext=.4:man.xpm:B:xman ext=.5:man.xpm:B:xman ext=.6:man.xpm:B:xman ext=.7:man.xpm:B:xman ext=.8:man.xpm:B:xman ext=.tar:tar.xpm:B: ext=.tgz:tar.xpm:B: