annotate vidix/unichrome_vid.c @ 28615:15e7abed4291

Use the same code to convert fps in float to fraction as used in mencoder, it ensures all the common frame rates work right. If this causes issues, it should be changed in the same way in mencoder.c

/*
 * VIDIX driver for VIA CLE266/Unichrome chipsets.
 *
 * Copyright (C) 2004 Timothy Lee
 * Thanks to Gilles Frattini for bugfixes
 * Doxygen documentation by Benjamin Zores <[e-mail]>
 * h/w revision detection by Timothy Lee <[e-mail]>
 *
 * This file is part of MPlayer.
 *
 * MPlayer is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * MPlayer is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
#include <unistd.h>

#include "config.h"
#include "vidix.h"
#include "fourcc.h"
#include "dha.h"
#include "pci_ids.h"
#include "pci_names.h"

#include "unichrome_regs.h"

/**
 * @brief Information on PCI device.
 */
static pciinfo_t pci_info;

/**
 * @brief Unichrome driver colorkey settings.
 */
static vidix_grkey_t uc_grkey;

static int frames[VID_PLAY_MAXFRAMES];
static uint8_t *vio;
static uint8_t *uc_mem;
static uint8_t mclk_save[3];
static uint8_t hwrev;

#define VIA_OUT(hwregs, reg, val)	*(volatile uint32_t *)((hwregs) + (reg)) = (val)
#define VIA_IN(hwregs, reg)		*(volatile uint32_t *)((hwregs) + (reg))
#define VGA_OUT8(hwregs, reg, val)	*(volatile uint8_t *)((hwregs) + (reg) + 0x8000) = (val)
#define VGA_IN8(hwregs, reg)		*(volatile uint8_t *)((hwregs) + (reg) + 0x8000)
#define VIDEO_OUT(hwregs, reg, val)	VIA_OUT((hwregs)+0x200, reg, val)
#define VIDEO_IN(hwregs, reg)		VIA_IN((hwregs)+0x200, reg)

#define outb(val,reg)	OUTPORT8(reg,val)
#define inb(reg)	INPORT8(reg)

#define ALIGN_TO(v, n) (((v) + (n-1)) & ~(n-1))
#define UC_MAP_V1_FIFO_CONTROL(depth, pre_thr, thr) \
    (((depth)-1) | ((thr) << 8) | ((pre_thr) << 24))

#define VIDEOMEMORY_SIZE	(8 * 1024 * 1024)
#define FRAMEBUFFER_SIZE	0x200000
#define FRAMEBUFFER_START	(VIDEOMEMORY_SIZE - FRAMEBUFFER_SIZE)

#ifdef DEBUG_LOGFILE
static FILE *logfile = 0;
#define LOGWRITE(x) {if(logfile) fprintf(logfile,x);}
#else
#define LOGWRITE(x)
#endif

/**
 * @brief Unichrome driver vidix capabilities.
 */
static vidix_capability_t uc_cap = {
  "VIA CLE266 Unichrome driver",
  "Timothy Lee <[e-mail]>",
  TYPE_OUTPUT,
  {0, 0, 0, 0},
  4096,
  4096,
  4,
  4,
  -1,
  FLAG_UPSCALER | FLAG_DOWNSCALER,
  VENDOR_VIA2,
  -1,
  {0, 0, 0, 0}
};

/**
 * @brief list of card IDs compliant with the Unichrome driver .
 */
static unsigned short uc_card_ids[] = {
  DEVICE_VIA2_VT8623_APOLLO_CLE266,
  DEVICE_VIA2_VT8378_S3_UNICHROME
};

/**
 * @brief Find chip index in Unichrome compliant devices list.
 *
 * @param chip_id PCI device ID.
 *
 * @returns index position in uc_card_ids if successful.
 *          -1 if chip_id is not a compliant chipset ID.
 */
static int
find_chip (unsigned chip_id)
{
  unsigned i;
  for (i = 0; i < sizeof (uc_card_ids) / sizeof (unsigned short); i++)
    {
      if (chip_id == uc_card_ids[i])
	return i;
    }
  return -1;
}

/**
 * @brief Map hardware settings for vertical scaling.
 *
 * @param sh source height.
 * @param dh destination height.
 * @param zoom will hold vertical setting of zoom register.
 * @param mini will hold vertical setting of mini register.
 *
 * @returns 1 if successful.
 *          0 if the zooming factor is too large or small.
 *
 * @note Derived from VIA's V4L driver.
 *       See ddover.c, DDOVER_HQVCalcZoomHeight()
 */
static int
uc_ovl_map_vzoom (uint32_t sh, uint32_t dh, uint32_t * zoom, uint32_t * mini)
{
  uint32_t sh1, tmp, d;
  int zoom_ok = 1;

  if (sh == dh) /* No zoom */
    {
      /* Do nothing */
    }
  else if (sh < dh) /* Zoom in */
    {
      tmp = (sh * 0x0400) / dh;
      zoom_ok = !(tmp > 0x3ff);

      *zoom |= (tmp & 0x3ff) | V1_Y_ZOOM_ENABLE;
      *mini |= V1_Y_INTERPOLY | V1_YCBCR_INTERPOLY;
    }
  else /* sw > dh - Zoom out */
    {
      /* Find a suitable divider (1 << d) = {2, 4, 8 or 16} */
      sh1 = sh;
      for (d = 1; d < 5; d++)
	{
	  sh1 >>= 1;
	  if (sh1 <= dh)
	    break;
	}
      if (d == 5) /* too small */
	{
	  d = 4;
	  zoom_ok = 0;
	}

      *mini |= ((d << 1) - 1) << 16;	/* <= {1,3,5,7} << 16 */

      /* Add scaling */
      if (sh1 < dh)
	{
	  tmp = (sh1 * 0x400) / dh;
	  *zoom |= ((tmp & 0x3ff) | V1_Y_ZOOM_ENABLE);
	  *mini |= V1_Y_INTERPOLY | V1_YCBCR_INTERPOLY;
	}
    }

  return zoom_ok;
}

/**
 * @brief Map hardware settings for horizontal scaling.
 *
 * @param sw source width.
 * @param dw destination width.
 * @param zoom will hold horizontal setting of zoom register.
 * @param mini will hold horizontal setting of mini register.
 * @param falign will hold fetch aligment.
 * @param dcount will hold display count.
 *
 * @returns 1 if successful.
 *          0 if the zooming factor is too large or small.
 *
 * @note Derived from VIA's V4L driver.
 *       See ddover.c, DDOVER_HQVCalcZoomWidth() and DDOver_GetDisplayCount()
 */
static int
uc_ovl_map_hzoom (uint32_t sw, uint32_t dw, uint32_t * zoom, uint32_t * mini,
		  int *falign, int *dcount)
{
  uint32_t tmp, sw1, d;
  int md; /* Minify-divider */
  int zoom_ok = 1;

  md = 1;
  *falign = 0;

  if (sw == dw) /* no zoom */
    {
      /* Do nothing */
    }
  else if (sw < dw) /* zoom in */
    {
      tmp = (sw * 0x0800) / dw;
      zoom_ok = !(tmp > 0x7ff);

      *zoom |= ((tmp & 0x7ff) << 16) | V1_X_ZOOM_ENABLE;
      *mini |= V1_X_INTERPOLY;
    }
  else /* sw > dw - Zoom out */
    {		
      /* Find a suitable divider (1 << d) = {2, 4, 8 or 16} */
      sw1 = sw;
      for (d = 1; d < 5; d++)
	{
	  sw1 >>= 1;
	  if (sw1 <= dw)
	    break;
	}
      if (d == 5) /* too small */
	{
	  d = 4;
	  zoom_ok = 0;
	}

      md = 1 << d; /* <= {2,4,8,16} */
      *falign = ((md << 1) - 1) & 0xf; /* <= {3,7,15,15} */
      *mini |= V1_X_INTERPOLY;
      *mini |= ((d << 1) - 1) << 24; /* <= {1,3,5,7} << 24 */

      /* Add scaling */
      if (sw1 < dw)
	{
	  /* CLE bug */
	  /* tmp = sw1*0x0800 / dw; */
	  tmp = (sw1 - 2) * 0x0800 / dw;
	  *zoom |= ((tmp & 0x7ff) << 16) | V1_X_ZOOM_ENABLE;
	}
    }

  *dcount = sw - md;
  return zoom_ok;
}

/**
 * @brief qword fetch register setting.
 *
 * @param format overlay pixel format.
 * @param sw source width.
 *
 * @return qword fetch register setting
 *
 * @note Derived from VIA's V4L driver. See ddover.c, DDOver_GetFetch()
 * @note Only call after uc_ovl_map_hzoom()
 */
static uint32_t
uc_ovl_map_qwfetch (uint32_t format, int sw)
{
  uint32_t fetch = 0;

  switch (format)
    {
    case IMGFMT_YV12:
    case IMGFMT_I420:
      fetch = ALIGN_TO (sw, 32) >> 4;
      break;
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
    case IMGFMT_YUY2:
      fetch = (ALIGN_TO (sw << 1, 16) >> 4) + 1;
      break;
    case IMGFMT_BGR15:
    case IMGFMT_BGR16:
      fetch = (ALIGN_TO (sw << 1, 16) >> 4) + 1;
      break;
    case IMGFMT_BGR32:
      fetch = (ALIGN_TO (sw << 2, 16) >> 4) + 1;
      break;
    default:
      printf ("[unichrome] Unexpected pixelformat!");
      break;
    }

  if (fetch < 4)
    fetch = 4;

  return fetch;
}

/**
 * @brief Map pixel format.
 *
 * @param format pixel format.
 *
 * @return the mapped pixel format.
 *
 * @note Derived from VIA's V4L driver. See ddover.c, DDOver_GetV1Format()
 */
static uint32_t
uc_ovl_map_format (uint32_t format)
{
  switch (format)
    {
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
    case IMGFMT_YUY2:
      return V1_COLORSPACE_SIGN | V1_YUV422;
    case IMGFMT_IYUV:
      return V1_COLORSPACE_SIGN | V1_YCbCr420 | V1_SWAP_SW;
    case IMGFMT_YV12:
    case IMGFMT_I420:
      return V1_COLORSPACE_SIGN | V1_YCbCr420;
    case IMGFMT_BGR15:
      return V1_RGB15;
    case IMGFMT_BGR16:
      return V1_RGB16;
    case IMGFMT_BGR32:
      return V1_RGB32;
    default:
      printf ("[unichrome] Unexpected pixelformat!");
      return V1_YUV422;
    }
}

/**
 * @brief Calculate V1 control and fifo-control register values.
 *
 * @param format pixel format.
 * @param sw source width.
 * @param hwrev CLE266 hardware revision.
 * @param extfifo_on set this 1 if the extended FIFO is enabled.
 * @param control will hold value for V1_CONTROL.
 * @param fifo will hold value for V1_FIFO_CONTROL.
 */
static void
uc_ovl_map_v1_control (uint32_t format, int sw,
		       int hwrev, int extfifo_on,
		       uint32_t * control, uint32_t * fifo)
{
  *control = V1_BOB_ENABLE | uc_ovl_map_format (format);

  if (hwrev == 0x10)
    {
      *control |= V1_EXPIRE_NUM_F;
    }
  else
    {
      if (extfifo_on)
	{
	  *control |= V1_EXPIRE_NUM_A | V1_FIFO_EXTENDED;
	}
      else
	{
	  *control |= V1_EXPIRE_NUM;
	}
    }

  if ((format == IMGFMT_YV12) || (format == IMGFMT_I420))
    {
      /* Minified video will be skewed without this workaround. */
      if (sw <= 80) /* Fetch count <= 5 */
	{			
	  *fifo = UC_MAP_V1_FIFO_CONTROL (16, 0, 0);
	}
      else
	{
	  if (hwrev == 0x10)
	    *fifo = UC_MAP_V1_FIFO_CONTROL (64, 56, 56);
	  else
	    *fifo = UC_MAP_V1_FIFO_CONTROL (16, 12, 8);
	}
    }
  else
    {
      if (hwrev == 0x10)
	{
	  *fifo = UC_MAP_V1_FIFO_CONTROL (64, 56, 56); /* Default rev 0x10 */
	}
      else
	{
	  if (extfifo_on)
	    *fifo = UC_MAP_V1_FIFO_CONTROL (48, 40, 40);
	  else
	    *fifo = UC_MAP_V1_FIFO_CONTROL (32, 29, 16); /* Default */
	}
    }
}

/**
 * @brief Setup extended FIFO.
 *
 * @param extfifo_on pointer determining if extended fifo is enable or not.
 * @param dst_w destination width.
 */
static void
uc_ovl_setup_fifo (int *extfifo_on, int dst_w)
{
  if (dst_w <= 1024) /* Disable extended FIFO */
    {
      outb (0x16, 0x3c4);
      outb (mclk_save[0], 0x3c5);
      outb (0x17, 0x3c4);
      outb (mclk_save[1], 0x3c5);
      outb (0x18, 0x3c4);
      outb (mclk_save[2], 0x3c5);
      *extfifo_on = 0;
    }
  else /* Enable extended FIFO */
    {
      outb (0x17, 0x3c4);
      outb (0x2f, 0x3c5);
      outb (0x16, 0x3c4);
      outb ((mclk_save[0] & 0xf0) | 0x14, 0x3c5);
      outb (0x18, 0x3c4);
      outb (0x56, 0x3c5);
      *extfifo_on = 1;
    }
}

static void
uc_ovl_vcmd_wait (volatile uint8_t * vio)
{
  while ((VIDEO_IN (vio, V_COMPOSE_MODE)
	  & (V1_COMMAND_FIRE | V3_COMMAND_FIRE)));
}

/**
 * @brief Probe hardware to find some useable chipset.
 *
 * @param verbose specifies verbose level.
 * @param force specifies force mode : driver should ignore
 *              device_id (danger but useful for new devices)
 *
 * @returns 0 if it can handle something in PC.
 *          a negative error code otherwise.
 */
static int
unichrome_probe (int verbose, int force)
{
  pciinfo_t lst[MAX_PCI_DEVICES];
  unsigned i, num_pci;
  int err;
  err = pci_scan (lst, &num_pci);
  if (err)
    {
      printf ("[unichrome] Error occurred during pci scan: %s\n", 
	      strerror (err));
      return err;
    }
  else
    {
      err = ENXIO;
      for (i = 0; i < num_pci; i++)
	{
	  if (lst[i].vendor == VENDOR_VIA2)
	    {
	      int idx;
	      const char *dname;
	      idx = find_chip (lst[i].device);
	      if (idx == -1)
		continue;
	      dname = pci_device_name (VENDOR_VIA2, lst[i].device);
	      dname = dname ? dname : "Unknown chip";
	      printf ("[unichrome] Found chip: %s\n", dname);
	      if ((lst[i].command & PCI_COMMAND_IO) == 0)
		{
		  printf ("[unichrome] Device is disabled, ignoring\n");
		  continue;
		}
	      uc_cap.device_id = lst[i].device;
	      err = 0;
	      memcpy (&pci_info, &lst[i], sizeof (pciinfo_t));
	      break;
	    }
	}
    }

  if (err && verbose)
    printf ("[unichrome] Can't find chip\n");
  return err;
}

/**
 * @brief Initializes driver.
 *
 * @returns 0 if ok.
 *          a negative error code otherwise.
 */
static int
unichrome_init (void)
{
  long tmp;
  uc_mem = map_phys_mem (pci_info.base0, VIDEOMEMORY_SIZE);
  enable_app_io ();

  outb (0x2f, 0x3c4);
  tmp = inb (0x3c5) << 0x18;
  vio = map_phys_mem (tmp, 0x1000);

  outb (0x16, 0x3c4);
  mclk_save[0] = inb (0x3c5);
  outb (0x17, 0x3c4);
  mclk_save[1] = inb (0x3c5);
  outb (0x18, 0x3c4);
  mclk_save[2] = inb (0x3c5);

  uc_grkey.ckey.blue = 0x00;
  uc_grkey.ckey.green = 0x00;
  uc_grkey.ckey.red = 0x00;

  /* Detect whether we have a CLE266Ax or CLE266Cx */
  outb (0x4f, 0x3d4);
  tmp = inb (0x3d5);
  outb (0x4f, 0x3d4);
  outb (0x55, 0x3d5);
  outb (0x4f, 0x3d4);
  if (0x55 == inb (0x3d5))
  {
    /* Only CLE266Cx supports CR4F */
    hwrev = 0x11;
  }
  else
  {
    /* Otherwise assume to be a CLE266Ax */
    hwrev = 0x00;
  }
  outb (0x4f, 0x3d4);
  outb (tmp, 0x3d5);

#ifdef DEBUG_LOGFILE
  logfile = fopen ("/tmp/uc_vidix.log", "w");
#endif
  return 0;
}

/**
 * @brief Destroys driver.
 */
static void
unichrome_destroy (void)
{
#ifdef DEBUG_LOGFILE
  if (logfile)
    fclose (logfile);
#endif
  outb (0x16, 0x3c4);
  outb (mclk_save[0], 0x3c5);
  outb (0x17, 0x3c4);
  outb (mclk_save[1], 0x3c5);
  outb (0x18, 0x3c4);
  outb (mclk_save[2], 0x3c5);

  disable_app_io ();
  unmap_phys_mem (uc_mem, VIDEOMEMORY_SIZE);
  unmap_phys_mem (vio, 0x1000);
}

/**
 * @brief Get chipset's hardware capabilities.
 *
 * @param to Pointer to the vidix_capability_t structure to be filled.
 *
 * @returns 0.
 */
static int
unichrome_get_caps (vidix_capability_t * to)
{
  memcpy (to, &uc_cap, sizeof (vidix_capability_t));
  return 0;
}

/**
 * @brief Report if the video FourCC is supported by hardware.
 *
 * @param fourcc input image format.
 *
 * @returns 1 if the fourcc is supported.
 *          0 otherwise.
 */
static int
is_supported_fourcc (uint32_t fourcc)
{
  switch (fourcc)
    {
    case IMGFMT_YV12:
    case IMGFMT_I420:
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
    case IMGFMT_YUY2:
    case IMGFMT_BGR15:
    case IMGFMT_BGR16:
    case IMGFMT_BGR32:
      return 1;
    default:
      return 0;
    }
}

/**
 * @brief Try to configure video memory for given fourcc.
 *
 * @param to Pointer to the vidix_fourcc_t structure to be filled.
 *
 * @returns 0 if ok.
 *          errno otherwise.
 */
static int
unichrome_query_fourcc (vidix_fourcc_t * to)
{
  if (is_supported_fourcc (to->fourcc))
    {
      to->depth = VID_DEPTH_ALL;
      to->flags = VID_CAP_EXPAND | VID_CAP_SHRINK | VID_CAP_COLORKEY;
      return 0;
    }
  else
    to->depth = to->flags = 0;
  return ENOSYS;
}

/**
 * @brief Get the GrKeys
 *
 * @param grkey Pointer to the vidix_grkey_t structure to be filled by driver.
 *
 * @return 0.
 */
static int
unichrome_get_gkey (vidix_grkey_t * grkey)
{
  memcpy (grkey, &uc_grkey, sizeof (vidix_grkey_t));
  return 0;
}

/**
 * @brief Set the GrKeys
 *
 * @param grkey Colorkey to be set.
 *
 * @return 0.
 */
static int
unichrome_set_gkey (const vidix_grkey_t * grkey)
{
  unsigned long dwCompose = VIDEO_IN (vio, V_COMPOSE_MODE) & ~0x0f;
  memcpy (&uc_grkey, grkey, sizeof (vidix_grkey_t));
  if (uc_grkey.ckey.op != CKEY_FALSE)
    {
      /* Set colorkey (how do I detect BPP in hardware ??) */
      unsigned long ckey;
      if (1) /* Assume 16-bit graphics */
	{
	  ckey = (grkey->ckey.blue & 0x1f)
	    | ((grkey->ckey.green & 0x3f) << 5)
	    | ((grkey->ckey.red & 0x1f) << 11);
	}
      else
	{
	  ckey = (grkey->ckey.blue)
	    | (grkey->ckey.green << 8) | (grkey->ckey.red << 16);
	}
      VIDEO_OUT (vio, V_COLOR_KEY, ckey);
      dwCompose |= SELECT_VIDEO_IF_COLOR_KEY;
    }

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE, dwCompose | V1_COMMAND_FIRE);
  return 0;
}

/**
 * @brief Unichrome driver equalizer capabilities.
 */
static vidix_video_eq_t equal = {
  VEQ_CAP_BRIGHTNESS | VEQ_CAP_SATURATION | VEQ_CAP_HUE,
  300, 100, 0, 0, 0, 0, 0, 0
};


/**
 * @brief Get the equalizer capabilities.
 *
 * @param eq Pointer to the vidix_video_eq_t structure to be filled by driver.
 *
 * @return 0.
 */
static int
unichrome_get_eq (vidix_video_eq_t * eq)
{
  memcpy (eq, &equal, sizeof (vidix_video_eq_t));
  return 0;
}

/**
 * @brief Set the equalizer capabilities for color correction
 *
 * @param eq equalizer capabilities to be set.
 *
 * @return 0.
 */
static int
unichrome_set_eq (const vidix_video_eq_t * eq)
{
  return 0;
}

/**
 * @brief Y, U, V offsets.
 */
static int YOffs, UOffs, VOffs;

static int unichrome_frame_select (unsigned int frame);

/**
 * @brief Configure driver for playback. Driver should prepare BES.
 *
 * @param info configuration description for playback.
 *
 * @returns  0 in case of success.
 *          -1 otherwise.
 */
static int
unichrome_config_playback (vidix_playback_t * info)
{
  int src_w, drw_w;
  int src_h, drw_h;
  long base0, pitch = 0;
  int uv_size = 0, swap_uv;
  unsigned int i;
  int extfifo_on;

  /* Overlay register settings */
  uint32_t win_start, win_end;
  uint32_t zoom, mini;
  uint32_t dcount, falign, qwfetch;
  uint32_t v_ctrl, fifo_ctrl;

  if (!is_supported_fourcc (info->fourcc))
    return -1;

  src_w = info->src.w;
  src_h = info->src.h;

  drw_w = info->dest.w;
  drw_h = info->dest.h;

  /* Setup FIFO */
  uc_ovl_setup_fifo (&extfifo_on, src_w);

  /* Get image format, FIFO size, etc. */
  uc_ovl_map_v1_control (info->fourcc, src_w, hwrev, extfifo_on,
			 &v_ctrl, &fifo_ctrl);

  /* Setup layer window */
  win_start = (info->dest.x << 16) | info->dest.y;
  win_end = ((info->dest.x + drw_w - 1) << 16) | (info->dest.y + drw_h - 1);

  /* Get scaling and data-fetch parameters */
  zoom = 0;
  mini = 0;
  uc_ovl_map_vzoom (src_h, drw_h, &zoom, &mini);
  uc_ovl_map_hzoom (src_w, drw_w, &zoom, &mini, (int *) &falign, (int *) &dcount);
  qwfetch = uc_ovl_map_qwfetch (info->fourcc, src_w);

  /* Calculate buffer sizes */
  swap_uv = 0;
  switch (info->fourcc)
    {
    case IMGFMT_YV12:
      swap_uv = 1;
    case IMGFMT_I420:
    case IMGFMT_UYVY:
    case IMGFMT_YVYU:
      pitch = ALIGN_TO (src_w, 32);
      uv_size = (pitch >> 1) * (src_h >> 1);
      break;

    case IMGFMT_YUY2:
    case IMGFMT_BGR15:
    case IMGFMT_BGR16:
      pitch = ALIGN_TO (src_w << 1, 32);
      uv_size = 0;
      break;

    case IMGFMT_BGR32:
      pitch = ALIGN_TO (src_w << 2, 32);
      uv_size = 0;
      break;
    }
  if ((src_w > 4096) || (src_h > 4096) ||
      (src_w < 32) || (src_h < 1) || (pitch > 0x1fff))
    {
      printf ("[unichrome] Layer size out of bounds\n");
    }

  /* Calculate offsets */
  info->offset.y = 0;
  info->offset.v = info->offset.y + pitch * src_h;
  info->offset.u = info->offset.v + uv_size;
  info->frame_size = info->offset.u + uv_size;
  YOffs = info->offset.y;
  UOffs = (swap_uv ? info->offset.v : info->offset.u);
  VOffs = (swap_uv ? info->offset.u : info->offset.v);

  /* Assume we have 2 MB to play with */
  info->num_frames = FRAMEBUFFER_SIZE / info->frame_size;
  if (info->num_frames > VID_PLAY_MAXFRAMES)
    info->num_frames = VID_PLAY_MAXFRAMES;

  /* Start at 6 MB. Let's hope it's not in use. */
  base0 = FRAMEBUFFER_START;
  info->dga_addr = uc_mem + base0;

  info->dest.pitch.y = 32;
  info->dest.pitch.u = 32;
  info->dest.pitch.v = 32;

  for (i = 0; i < info->num_frames; i++)
    {
      info->offsets[i] = info->frame_size * i;
      frames[i] = base0 + info->offsets[i];
    }

  /* Write to the hardware */
  uc_ovl_vcmd_wait (vio);

  /* Configure diy_pitchlay parameters now */
  if (v_ctrl & V1_COLORSPACE_SIGN)
    {
      if (hwrev >= 0x10)
	{
	  VIDEO_OUT (vio, V1_ColorSpaceReg_2, ColorSpaceValue_2_3123C0);
	  VIDEO_OUT (vio, V1_ColorSpaceReg_1, ColorSpaceValue_1_3123C0);
	}
      else
	{
      VIDEO_OUT (vio, V1_ColorSpaceReg_2, ColorSpaceValue_2);
      VIDEO_OUT (vio, V1_ColorSpaceReg_1, ColorSpaceValue_1);
    }
    }

  VIDEO_OUT (vio, V1_CONTROL, v_ctrl);
  VIDEO_OUT (vio, V_FIFO_CONTROL, fifo_ctrl);

  VIDEO_OUT (vio, V1_WIN_START_Y, win_start);
  VIDEO_OUT (vio, V1_WIN_END_Y, win_end);

  VIDEO_OUT (vio, V1_SOURCE_HEIGHT, (src_h << 16) | dcount);

  VIDEO_OUT (vio, V12_QWORD_PER_LINE, qwfetch << 20);
  VIDEO_OUT (vio, V1_STRIDE, pitch | ((pitch >> 1) << 16));

  VIDEO_OUT (vio, V1_MINI_CONTROL, mini);
  VIDEO_OUT (vio, V1_ZOOM_CONTROL, zoom);

  /* Configure buffer address and execute the changes now! */
  unichrome_frame_select (0);

  return 0;
}

/**
 * @brief Set playback on : driver should activate BES on this call.
 *
 * @return 0.
 */
static int
unichrome_playback_on (void)
{
  LOGWRITE ("Enable overlay\n");

  /* Turn on overlay */
  VIDEO_OUT (vio, V1_CONTROL, VIDEO_IN (vio, V1_CONTROL) | V1_ENABLE);

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE,
	     VIDEO_IN (vio, V_COMPOSE_MODE) | V1_COMMAND_FIRE);

  return 0;
}

/**
 * @brief Set playback off : driver should deactivate BES on this call.
 *
 * @return 0.
 */
static int
unichrome_playback_off (void)
{
  LOGWRITE ("Disable overlay\n");

  uc_ovl_vcmd_wait (vio);

  /* Restore FIFO */
  VIDEO_OUT (vio, V_FIFO_CONTROL, UC_MAP_V1_FIFO_CONTROL (16, 12, 8));

  /* Turn off overlay */
  VIDEO_OUT (vio, V1_CONTROL, VIDEO_IN (vio, V1_CONTROL) & ~V1_ENABLE);

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE,
	     VIDEO_IN (vio, V_COMPOSE_MODE) | V1_COMMAND_FIRE);

  return 0;
}

/**
 * @brief Driver should prepare and activate corresponded frame.
 *
 * @param frame the frame index.
 *
 * @return 0.
 *
 * @note This function is used only for double and triple buffering
 *       and never used for single buffering playback.
 */
static int
unichrome_frame_select (unsigned int frame)
{
  LOGWRITE ("Frame select\n");

  uc_ovl_vcmd_wait (vio);

  /* Configure buffer address */
  VIDEO_OUT (vio, V1_STARTADDR_Y0, frames[frame] + YOffs);
  VIDEO_OUT (vio, V1_STARTADDR_CB0, frames[frame] + UOffs);
  VIDEO_OUT (vio, V1_STARTADDR_CR0, frames[frame] + VOffs);

  /* Execute the changes */
  VIDEO_OUT (vio, V_COMPOSE_MODE,
	     VIDEO_IN (vio, V_COMPOSE_MODE) | V1_COMMAND_FIRE);

  return 0;
}

VDXDriver unichrome_drv = {
  "unichrome",
  NULL,
  .probe = unichrome_probe,
  .get_caps = unichrome_get_caps,
  .query_fourcc = unichrome_query_fourcc,
  .init = unichrome_init,
  .destroy = unichrome_destroy,
  .config_playback = unichrome_config_playback,
  .playback_on = unichrome_playback_on,
  .playback_off = unichrome_playback_off,
  .frame_sel = unichrome_frame_select,
  .get_eq = unichrome_get_eq,
  .set_eq = unichrome_set_eq,
  .get_gkey = unichrome_get_gkey,
  .set_gkey = unichrome_set_gkey,
};