annotate DOCS/ChangeLog @ 8:5f9ece2d0621

put back 0.11pre25

ChangeLog:
~~~~~~~~~~

v0.12-pre1:  [ not yet released ]
  - ffmpeg included into source tree

===========================================================================
Note: If you've sent patches not applied in pre22, please send them again!
/|\   (I've got tons of mails last weeks, and can't re-read all of them)
/~\   Please include in the Subject: MPLAYER-PATCH
===========================================================================

*** 0.11 release is coming SOON!!! ***

v0.11-pre25:  small fixes again :(
  - DOCS updated (email address changed from arpi@* -> maillist)
  - LIRC fix, mplayer_lirc changed back to mplayer [Andreas Ackermann]
  - stream.c: unsigned int fixes, required for some strange .asf files
  - asfheader.c: using w=h=b=1 for audio_concealment_none
  - VCD-related stuff moved from stream.c to vcd_read.c

v0.11-pre24:  small fixes again :(
  - DOCS/LIRC changed: users *must* enable lirc support manually, it is
    not autodetected yet.  (./configure --enable-lirc)
  - the {prefix} bug fixed by Gabucino
  - added manpage by Gabucino
  - manpage -vo fixes by A'rpi

v0.11-pre23:  lirc support, text updates, mailinglists
  - added "-ni" option to force usage of the non-interleaved AVI parser
  - DOCS/* updated by Gabucino
  - new homepage by Gabucino
  - mplayer users & announce mailing lists by Dariusz Pietrzak (see README)
  - LIRC support by Andreas Ackermann (see DOCS/LIRC)
    enable with ./configure --enable-lirc
    TODO: ./configure should detect LIRC installed and better Makefile handling
  - added AVI_NINI parser for broken (no index) non-interleaved files

v0.11-pre22:  last fixes, release is coming soon!
  - non-interleaved avi EOF bug fixed  [thanks to DC-1 for help]
  - "You" strings in Makefile after make dep bug fixed...  [thx to DC-1]
  - SDL disabled by default. You have to ./configure --enable-sdl to enable.
  - homepage updated by Gabucino
  - homepage updated by A'rpi
  - FAQ updated by A'rpi

fork()  -> 0.12pre1

v0.11-pre21:  mpeg1 pp, stereo fix
  - "Skip chunk xxxx" messages moved from -v to -v -v -v debug level...
    [thanks to Christoph H. Lampert]
  - divx postprocess filter works for mpeg1 files too! (-divxq 1/3/7/31)
  - mpeg layer-2 audio fixed - it's stereo again!!!
  - audio select() detection: if detected audio buffer size == 0, then
    exit with message "recompile mplayer with #undef HAVE_AUDIO_SELECT"...
  - syncfb driver added to the source tree, under drivers/
    (it's very similar to mga_vid, but has syncronization to screen and
     de-interlace features)
  - draw_slice in syncfb finished for G400 cards (plays mpeg 1/2, opendivx)
    (de-interlacing has been disabled, because it's buggy now)

v0.11-pre20:  NI-AVI support, small fixes & patches...
  - asf parser: flag 0x40 (explicit packet size) implemented [Marvin]
  - new option to select DSP device:  -dsp   (default: /dev/dsp) [Pontscho]
  - option -o changed to -vo
  - ./configure: applied patches  [LGB,Ian Kumlien,Magnus Pfeffer]
  - avi chunk_id->ds mapper moved to demux_avi_select_stream()
  - added non-interleaved .AVI parser
  - added non-interleaved .AVI detection (if a_pos-v_pos distance > 1MB)

v0.11-pre19:  small fixes...
  - vo_xmga.c: G200 draw_slice fixed
    xmga + mga: common part (draw_frame & draw_slice) moved to mga_common.c
  - some independent code (asfinfo.c and GL-test) moved to the new TOOLS subdir
  - movinfo.c added to TOOLS (small util to dump .mov file structure)
  - AVI & ASF stream id detection changed: now using IDs from the header
    (but still can be overriden by -aid or -vid)     [Christoph H. Lampert]
  - native MS-GSM audio codec ported from avifile source  (-afm 6)
    [thanks for the testfile to Christoph H. Lampert]
  - README updated (input & codec lists)
  - implemented .asf audio descrambling  [Dirk Vornheder & Einon]
    -> that weird_al_yankovic asf is not so weird now :)
  - AUTHORS file changed

v0.11-pre18:  patch release :)
  - skip broken .asf fragments (for better seeking)
  - seeking code cleanup in sources (now it's in a switch(){})
  - opendivx encoding bitrate option changed from -divxq to -br
    (for the divx -> divx re-encoding)
  - TO DO section moved to file TODO
  - applied ./configure and Makefile changes patch from LGB
  - libvo function changes by Pontscho: x11 (with -fs), xmga (bugfixed!)
  - libvo: driver sources renamed from video_out_*.c -> vo_*.c
  - libvo: added uninit() function to drivers
  - libvo: fork()'ed X11 eventhandler for x11 and xmga drivers  [me & Pontscho]
     (gl and xv version is coming soon!)
  - libvo: sdl driver now closes SDL at QUIT...
  - small english fixes (docs & messages)   [Balazs Tibor]

v0.11-pre17:  fixes
  - asf "missing video stream" fixed (stream id & 0x7F)  [Christoph H. Lampert]
  - added GL-test directory, it contains source and compiler script of a
    very simple open-gl texture updating (glTexSubImage) test program.
    if it runs well, then mplayer -o gl should work too.
    it works on G400+Utah-GLX, but segfaults in the G400 driver of X 4.0.2/DRI.
    try it with different cards/drivers, and please report me the results.
  - benchmarking in gltest.c: calculate fps and process times
  - .asf seeking v0.01-pre0.1 :)

v0.11-pre16:  ACM fixed
  - Win32/ACM audio codec fixed (most important for asf with divx audio):
    There was an output buffer size problem with the Win32/ACM audio codec
    at low bitrates (usually used for .asf files with divx audio)
    Input and output buffer sizes are now queryed, problem solved :)
  - SDL support compiling hint by Michael Durller added to the FAQ
  - opendivx support in .asf files   [Gérard Lantau]
  - ./configure & Makefiles patch by Aaron Hope applied.
    (adds --with-win32libdir and fixes --with-x11libdir)
  - ./configure fixed, now it defaults to /usr/lib/win32 if detection failed

v0.11-pre15:  asf sync fixed
  - asf parser: now supports other than 0x5D segments  [Dirk Vornheder]
  - new asf PTS reading: sync works now, including fps...
    (-fps no longer required!)  [thanks again to Eugene Kuznetsov for docs!]

v0.11-pre14:  small fixes, asf sync v0.1 :)
  - version number incremented :)))
  - libvo / Xv driver swapped Red-Blue fixed
  - asf timestamps implemented - now asf A-V should be in sync if you
    specify the correct fps at commandline (-fps), +-1 fps allowed...
    [i haven't yet found method to get fps out from asf headers :(((]
  - some error and consistency checking into demux_asf
    if you see many warning! messages playing an .asf file, then contact
    me and upload the file (first 1MB is enough if it represents the problem)
    Don't forget: there is no public doc about the .asf file format, so 
    everything we know is suspected and can be wrong... without your help
    we never will have working .asf player...
  - asf fragment offset checks disabled for grouping...

v0.11-pre13:  libvo changes, mpeg bitrate, vcd fix, asf grouping
  - libvo: draw_slice() interface changed, now it has src stride[3] and
    destination rect dimension (w,h,x,y)
    It's able to blit whole frames, not only 16-pixel slices...
  - libmpeg2 and opendivx codec changed to use new draw_slice()
    -> opendivx extra 64-pixel width band at right disappeared!
  - mpeg bitrate fix: if picture->bitrate==0x3FFFF (means "unspecified" ?)
    then using standard VCD bitrate (75*2324 bytes/sec)
    -> fixed seeking for those mpegs with "16MBit/s" bitrate...
  - drivers/sis_vid: video4linux interface disabled
  - broken VCD playing fixed: stream_reset shouldn't seek to 0x0...
    [bugreport: Kang Sun]
  - asf_parser: grouping implemented!  [test file provided by Gabucino :))]

v0.11-pre12:  ./configure fixes, improved odivx-encoding, streaming fixes
  - ./configure: using /tmp/main$$.c instead /tmp.main.c, and
    remove file after tests  [SaPe]
  - ./configure: trying the gcc optimize options and fallback to 'pentium'
    if fails (useful for people with old gcc and new cpu :))
  - removed -fomit-frame-pointer from OPTFLAGS at config.mak
  - version number incremented [Gabucino]
  - odivx encoder fix: allow long (longer than xxxx.avi) destination filenames
    (sizeof() changed to strlen()...)  [Gabucino]
  - avi writer - overwrite disabled (exits with error message if destination
    file already exists...)  [Gabucino]
  - use -divxq to set encoding bitrate (in bits (no kbits!) default: 780000)
  - no audio decoding if -encode option is used
  - audio streaming disabled if -nosound specified (setting audio_id to -2)
  - fast Mpeg-ES detection (doesn't read the whole Mpeg-PS file)
  - compile-time option to disable using soundcard driver's select()
    (requires for some people with buggy/pre-alpha/etc sound driver...)

v0.11-pre11:  streaming fixes, asf support pre, indeo5 fix
  - asf/asfinfo.c improved: now it dumps streams to files - need testing!
    (it's ready to be converted to asf demuxer and intergated into MPlayer)
  - stream.c / stream_reset() fix: now it really seek back to 0 position!
  - .asf file format detection added (no .asf reading yet!!!)
  - .asf demultiplexer added, changes in demuxer.c to handle fragmented packets
  > it plays .asf video well, but still has problems with divx/wma audio. :(((
  - indeo 5 playing fixed (removed ICDECOMPRESS_UPDATE from flags)
  - xmga resizing problems with some window managers, so default order is
    changed xmga,xma... to mga,xmga,...
  - found gcc bug: compiling MPlayer with flags 
    OPTFLAGS=-O -g -march=i686 -mcpu=i686 -pipe -fomit-frame-pointer -ffast-math
    cause image sizes negating -> mga_vid kernel driver Oops... :(((
  - runaway.bride.sample.avi seeking segfault discovered: AC3 resync fails :(
  - improved signal handling: module name is now printed. audio_resync added.
  - RGB opendivx encoding implemented, now AVI->opendivx is possible.

v0.11-pre10:  OpenDivX encoding, streaming fixes, avi seek fixes
  - new libvo driver: odivx  (OpenDivX File Writer)
  - AVI file writting support, new option:  -encode filename
    to encode an mpeg/vob/vcd to opendivx:
      mplayer file1.mpg -encode file2.avi -o odivx -nosound
    (sound encoding/copy is not yet supported)
  - libvo: default driver priority changed to: xmga,mga,syncfb,3dfx,xv,x11,gl
  - avi writer: index support
  - small fixes in avi writer to be compliant (adjusted chunk/list lengths)
  - demuxer.c: stream buffering fixes:
    - missing {} in mplayer.c occuring audio reads when has_audio=0
    - reordered packet reader and pack count checks -> no more unwanted EOF
    - added 4MB buffer memory usage limit to demuxed streams
  - CPU flags in ./configure changed:
      k7 -> k6  (current stable gcc doesn't supports k7)
      386,486 -> i386,i486    [Balazs Tibor]
  - demux_avi: index check now accepts (raw.len+1)==idx.len  [Balazs Tibor]
  - FAQ added

    **  Now we are ready with planned features & urgent fixes, **
    **  it's time to final testing and then the 0.11 release!! **

v0.11-pre9:  OpenDivX fixes,speedup
  - solved OpenDivX width problem (stride=width+(Quality?0:64))
    now -divxq 0 works, and 0 is the default
  - libvo call moved out from my_convert_yuv() so it can be measured (cpu %)
  - IDCT code ported from libmpeg2 -> much faster OpenDivX decoding

v0.11-pre8:  SDL fixes, OpenDivX support
  - added -I/usr/X11R6/include to libvo CFLAGS
  - (removed later: applied libvo SDL driver fixes by Jeffrey Boser)
  - OpenDivX support, initial hack, maybe not work for you...
    (I need testfiles, I have just only one)
    use -divxq option to adjust quality (1..29 works), 1=default

v0.11-pre7:  SDL support
  - ported SDL driver from mpeg2dec/libvo (currect CVS)
    (it's slower than internal X11 driver, but supports software scaling!)
  - fixed SDL driver to support -fs and pass keyboard events
  - SDL driver changed to support YV12 and YUY2 formats instead of IYUV
    (now works with DivX files too)
  - 'q' (Quit) disabled in SDL fullscreen mode (because it's impossible
    to restore screen before exiting so it gets unusable state now)

v0.11-pre6:  audio fix
  - fixed video_out_xv.c compiling problems [bugreport: Kalle Mellerup]
  - modified audio playing: always keep buffer (both internal and card's)
    filled using select() -> -alsa audio delays should be fixed.
  - updated DOCS/AUTHORS and DOCS/README

v0.11-pre5:  xmmp audio support, applied Pontscho's libvo patch
  - xmmp audio driver support by Arthur Kleer
  - new video_out driver by Pontscho: xmga  (Matrox G200/G400 only!)
    It does same under X 3.3.x what Xv extension does under X 4.0.x!
    (you will have a moveable/resizeable window but see an YUV video
     overlay in it using color keying)
  - added keyboard event support in X11 windows    [Pontscho]
    (using mplayer_[put|get]_key() in codecctrl.c)

v0.11-pre4:  x11 driver fixes, 15/16bpp support
  - version in version.h fixed :))) [Pontscho]
  - inttypes.h moved to DOCS/ (copy back to the root if you need it)
  - depth calculation in vo_init() changed (Pontscho's version couldn't
    make difference between 15 and 16bpp)
  - x11 driver now uses vo_init() instead of get_depth()
  - yuv2mmx: 15bpp not really supported -> removed from list, now
    conversion is done (well) by the C code -> MPEG play in 15bpp works!
  - avi playing support added in 15bpp (memcpy)
  - avi playing support added in 16bpp (C 15->16 converter by me)
  - avi playing support added in 16bpp (MMX 15->16 converter by Strepto)
  - libvo/x11: yuv2rgb used MMX code on non-MMX CPUs too!!! fixed...
  - all x11 modes tested (and mpeg/24bpp byteorder fixed):
                  MPEG:            AVI/VfW:
        15bpp    C convert        memcpy
        16bpp    MMX/C convert    MMX/C convert
        24bpp    C convert        memcpy
        32bpp    MMX/C convert    memcpy / C conv.
    => now all the movie types are viewable using the -o x11 driver!

v0.11-pre3:  mpeg fixes, fullscreen support
  - vertical.mpg serious libvo (x11,gl) segfaults fixed:
    yuv2rgb_mmx requires one more lines that vertical image size...
    fixed (allocating memory for width*(height+1)).   [bugreport: Gabucino]
  - Pontscho's fullscreen patch applied!
    Using option -fs will maximize window size (for all resizeable drivers
    including mga!) and disable window decorations (x11,Xv,gl only)
  - simple inttypes.h included for libc5 (and glibc2.0 too?) users
  - homepage updates (links changed ftp->http)

v0.11-pre2:  better user messages, mp3 codec selection, demuxer changes
  - w32codec.zip restored at the FTP site (somehow it damaged...)
  - added version.h, and used its content everywhere
  - 'premature end-of-file' problem fixed: freeing audio buffers and
    setting d_audio->id=-2 if has_audio==0  [bugreport by Dmitri Pogosyan]
  - some more messages added if verbose>=1
  - demuxer.c: error message printed if A or V chunk buffer is full
    'mplayer test.avi -aid -2' still not works without option '-nosound'
  - adding new config.h option to set default MP3 audio codec (mpg123/l3codeca)
    ./configure selects mp3lib only if you have 3Dnow    [idea: Gabucino]
  - automatic fallback to mp3lib/mpg123 if l3codeca.acm can't be loaded/inited

v0.11-pre1:  AVI sync fixes
  - AVI audio seeking improvements: now using nBlockAlign value to seek
    inside the chunk, so divx audio works without big delays!!!
  - AVI PTS calculation modified: counting video PTS when skip_video_frames>0
    so new audio PTS values will be correct. Solved many sync probs!
  - A-V sync with AVI files fixed!
    Now only the Desperado-trailer has 1.0 sec delay after seeking.
  - fixed AVI sync in -bps mode too! :)  (perfect except that Desperado avi)

v0.10:  The new year release!
  - testing
  - docs changed
  - it's time to release and remove the old buggy 0.09 version...
  - release!!!
  
v0.10-pre8:  libvo/x11 changes
  - libvo: x11/xv driver separated to x11 and xv drivers
  - libvo: DUMMY_VO_FUNC removed from driver sources
  - libvo: default driver order changed, because some users with software-only
           opengl though that this 'slow' player can only play at 1-3fps :)

v0.10-pre7:  libmpeg2 interface changes, display size/area changes, AVI fixes
  - libmpeg2/decode.c modified:
    - removed unused OMS and mpeg2dec stuff
    - decode_data rewritten, now works like parse_es.c
      => doesn't copy any data -> faster and less memory usage
  - mplayer.c sends code 0x1FF after every frame, so libmpeg2 knows
    when has to display it
  - mplayer.c: in_frame flag fixes, didn't work well with mpeg2 streams
    (because there is a 0x1B2 chunk between 0x100 and 0x101)
  - 'picture' changed from static to shmem-allocated
    -> better picture after codec restart (tested with JapAd.mpg)
    -> keep information of the header changes (after init)
  - mpeg image size changed, now only the real part of frame is displayed
    (no more green strip at the bottom)
    - picture struct: new fields: display_picture_width/height
    - image buffer allocation (shmem) is done by decode.c instead of libvo
  - new option:  -xy <value>  (resize both x/y direction)
    if value<=8  ->  x_scale = y_scale = value
    else         ->  x_size=value  y_size=aspectratio*x_size
  - mplayer.c: video output moved out from avi/mpg init sections and
    now it's common code (added movie_size_x/y variables and out_fmt global)
  - new keys:
    ESC       => quit
    + and -   => adjust audio delay +- 0.1 second
    k         => kill/restart the mpeg codec process (for testing)
  - codec control interface changed: wait for syncword after (re)start
    to avoid receiving old frames => it's stable again!
  - removed (now unused) allocate/free image buffer code from libvo
  - mplayer: new internal variable for video format: has_video
       0 = none (unused yet)
       1 = mpeg 1/2 video
       2 = win32/VfW video codec
  - config.h has defaults for bps-based AVI sync and ALSA timer code options:
     #undef AVI_SYNC_BPS  => now it's disabled by default!!! use -bps to enable
     #define ALSA_TIMER   => now it's enabled by default!!! use -noalsa to dis.
  - help updated
  - prints max compressed framesize at exit (both avi & mpeg)
  - AVI audio seeking fixed: some ACM codecs (divx audio and ms-adpcm)
    can't seek inside a chunk, they are only able to play whole chunks.
    Current audio seeking has changed to seek inside the chunk only if the
    codec supports it (only internal codecs and ACM/mp3 allows it).
  - AVI: audio delay correction if can't seek inside the chunk

v0.10-pre6:  mpeg signal & EOF fixes
  - ./configure: k6_mtrr (2.4.test11+) added [Pontscho]
  - `term destroys if mplayer (mpg) called from mc.ext` bug fixed:
    added sighandler to the 3rd process (mpeg codec) to avoid sig. recursion
  - better output at exit (handled now by exit_player())
  - mpeg EOF problem (codec restart) fixed: added EOF detection to parse_es.c
  - internal flag 'current_module' added to get more info at segfaults
    (contains module number where the segfault occured)
  - audio detection changed: using afm=4 (Win32/ACM) for MP3 audio (AVI files)
    (you MUST have l3codeca.acm at /usr/lib/win32, or you have to use '-afm 1')

v0.10-pre5:  flipping fixed
  - AVI image flipping reworked:
    - new flag: avi_header.flipped, TRUE if upside-down
    - image flipping code removed/disabled from libvo modules
    - duplicate flip_page() calls removed (overload with x11 and mga)
  - aLaw audio codec (AVI id 0x06) added (uses code from xanim source)

v0.10-pre4:  test release, small fixes
  - video_out driver <-> codec incompatibility message changed
  - fixed the config.format bug in drivers/mga_vid_test, so it works again!
    [thanks to David Whysong]
  - libmpeg2 upgraded

v0.10-pre3:  test release, verbose mode, new docs
  - new option:  -v  =  increment verbose level
    (debug printf's changed to verbose level-dependent)
    - default level: 0, only some informal output
    - init debug:    1, some basic debug infos, avi header, function values
    - player debug:  2, print avi indexes, chunk inputs, more debug infos
    - parser debug:  3, prints everything related to input parsers
    to increment verbose level, use multiple -v options (-v -v -v for level-3)
  - bitrate calculation for AVI files
  - README rewritten, added Troubleshooting and Bugreports sections
  - TVout directory added (only the scripts)

v0.10-pre2:  bugfix test release, bps-sync enabled
  - avi: supporting both 0-based and movi-based index types (autodetect)
  - avi: tested with VBR audio: plays well with -mc 0 option, seek doesn't
    work yet   [thanks to Alan Chen for testfile]
  - avi: A-V sync to avg. byte/sec implemented (again) and enabled by default
    (disable with -nobps if you want)
  - ./configire: 3rd name ('kni') of the P3 added. Where is the compatibility?
  - useless '\' removed from libac3/Makefile  [Otvos Ferenc]

v0.10-pre1:  test release, players merged!!!
  - avip and mpegp has been merged to a single binary called 'mplayer'
    - file type detection (AVI/MPEG-PS/MPEG-ES/Other)
    - no redundant code (common code for common jobs)
    - big format-dependent codes moved to functions (separated files)
    - better error messages, removed some debug stuff, code cleanups
  - old libmpeg2 version removed from source tree
  - help texts merged (help_avi+help_mpg -> help_mp)
  - new options:  -x <x> -y <y>     = scale image (if selected driver supports)
    if value<=8 then image size will be multiplied by value, otherwise
    image size will be scaled to <value> pixels.
    For example:
      2x ZOOM:  mplayer -x 2 -y 2 test.mpg
      800x600:  mplayer -x 800 -y 600 test.mpg
    [default values are still configurable at compile-time, see config.h]
  - TV project (not finished) codebase added (see tvision.c, or: make tvision)

v0.09:  Beta release [same as 0.09-pre3]
  - version changed in the files
  - docs updated  
  
v0.09-pre3:  bugfix test-release, X11 support testing
  - fixed the  if [ -z $pparam ]  bug in ./configure  [Christian Birchinger]
  - many changes in AVI seek code, resulting near-perfect seeking now!
    current method calc absolute audio position, so with VBR audio it
    doesn't work yet...
  - avip: Xv support (YUY2 image format)
  - avip: X11 support (24 & 32 bpp only, BGR format)
    I need a very fast 15->16bpp converter for 16bpp support... anyone helps?

v0.09-pre2:  bugfix test-release 
  - removed unnecessary code from libmpeg2/header.c
    Walken told me that standard mpg/vob streams must NOT use framerate
    and bitrate extension... and the ext. id check is done by the caller.
  - CRC support to mp3lib's mpeg audio layer-2 decoder
    thanks for bugreport & testfile to Samson

v0.09-pre1:  bugfix test-release
  - imported new libmpeg2 files (under testing...)
  - GL renderer flickering bug fixed (MMX missing emms() between yuv2rgb and
    glTexSubImage(), bug triggered by new Utah-GLX code)
    [thanks for Christian Birchinger]

v0.08: Index support, avi seeking, DLL loader fix, compilation fixes
  - Added support for chunk index usage (disable with -noidx option)
  - Removed code optimization flags from loader/Makefile because
    it segfaults if compile optimized code (it does some hacks with
    pointers, maybe the reordered code confuses it)
  - added new tool called aviparse  (read and check avi file structure)
  - indexed and raw chunk info comparing, bad chunks dropped
  - termcap usage is optional (for those debian users without termcap)
  - #if HAVE_* fixed (to #ifdef HAVE_*)
  - ./configure supports new /proc/cpuinfo (2.4.0-test11)
      - sse is called 'sse' again
      - 'flags' field renamed to 'features'
  - Xv benchmark results added to DOCS/SPEED
  - avi seeking (and other goodies, pause etc) implemented
    no PTS resync after seek yet.
  - default video_out driver changed from 'mga' to the first available driver
    new driver priority:  mga_vid, opengl, x11

v0.07: Easier compile
  - Added Pontscho's ./configure script (it's modified a lot)
  - Updated makefiles, and tested a lot :)
  - Updated DOCS/INSTALL

v0.06: Better codec selection
  - avi audio&video codec selection moved to new codecs.c file,
    loader/driver.c and loader/afl.c modified for this
  - yuv support fixed, codecs.c setup flags to handle yuv properly
    yuv works fine with divx, mpeg4, cvid, and upside-down iv50
  - DOCS/INSTALL updated
  - DOCS/SPEED updated, DivX benchmarks added

v0.05: Merged with MPEGplayer 0.90pre6, first public release of AVI player
  - code merged with mpegplayer, new Makefile, some small modifications
  - docs updated and moved to DOCS

v0.04: YUV support, some code cleanup, preview-release

v0.01: first version based on new MPEGplayer's codebase.