annotate libao2/ao_dxr3.c @ 2968:9989497ab31e

Minor fixes by David.

#include <stdio.h>
#include <stdlib.h>

#include <linux/em8300.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#include "../config.h"

#include "afmt.h"

#include "audio_out.h"
#include "audio_out_internal.h"

extern int verbose;

static ao_info_t info = 
{
	"DXR3/H+ audio out",
	"dxr3",
	"David Holm <[e-mail]>",
	""
};

LIBAO_EXTERN(dxr3)

// there are some globals:
// ao_samplerate
// ao_channels
// ao_format
// ao_bps
// ao_outburst
// ao_buffersize

//static char *em8300_ma="/dev/em8300_ma";
static audio_buf_info dxr3_buf_info;
static int fd_control = 0, fd_audio = 0;

// to set/get/query special features/parameters
static int control(int cmd,int arg)
{
    switch(cmd)
    {
	case AOCONTROL_QUERY_FORMAT:
	    return CONTROL_TRUE;
	case AOCONTROL_GET_VOLUME:
	case AOCONTROL_SET_VOLUME:
		return CONTROL_OK;
	return CONTROL_ERROR;
    }
    return CONTROL_UNKNOWN;
}

// open & setup audio device
// return: 1=success 0=fail
static int init(int rate,int channels,int format,int flags)
{
  int ioval;
  fd_audio = open( "/dev/em8300_ma", O_WRONLY );  
  if( fd_audio < 0 )
  {
    printf("AO: [dxr3] Can't open audio device /dev/em8300_ma  -> nosound\n");
    return 0;
  }
  
  fd_control = open( "/dev/em8300", O_WRONLY );
  if( fd_control < 0 )
  {
    printf("AO: [dxr3] Can't open em8300 control /dev/em8300\n");
    return 0;
  }
  
  ao_format = format;
  if( ioctl (fd_audio, SNDCTL_DSP_SETFMT, &ao_format) < 0 )
    printf( "AO: [dxr3] Unable to set audio format\n" );
  if(format == AFMT_AC3 && ao_format != AFMT_AC3) 
  {
      printf("AO: [dxr3] Can't set audio device /dev/em8300_ma to AC3 output\n");
      return 0;
  }
  printf("AO: [dxr3] Sample format: %s (requested: %s)\n",
    audio_out_format_name(ao_format), audio_out_format_name(format));
  
  if(format != AFMT_AC3) 
  {
	ao_channels=channels-1;
        if( ioctl (fd_audio, SNDCTL_DSP_STEREO, &ao_channels) < 0 )
	    printf( "AO: [dxr3] Unable to set number of channels\n" );
  
	// set rate
	ao_samplerate=rate;
	if( ioctl (fd_audio, SNDCTL_DSP_SPEED, &ao_samplerate) < 0 )
	    printf( "AO: [dxr3] Unable to set samplerate\n" );
	printf("AO: [dxr3] Using %d Hz samplerate (requested: %d)\n",ao_samplerate,rate);
  }

  if( ioctl(fd_audio, SNDCTL_DSP_GETOSPACE, &dxr3_buf_info)==-1 )
  {
      int r=0;
      printf("AO: [dxr3] Driver doesn't support SNDCTL_DSP_GETOSPACE :-(\n");
      if( ioctl( fd_audio, SNDCTL_DSP_GETBLKSIZE, &r) ==-1 )
      {
          printf( "AO: [dxr3] %d bytes/frag (config.h)\n", ao_outburst );
      } 
      else 
      { 
          ao_outburst=r;
          printf( "AO: [dxr3] %d bytes/frag (GETBLKSIZE)\n",ao_outburst);
      }
  } 
  else 
  {
      printf("AO: [dxr3] frags: %3d/%d  (%d bytes/frag)  free: %6d\n",
          dxr3_buf_info.fragments+1, dxr3_buf_info.fragstotal, dxr3_buf_info.fragsize, dxr3_buf_info.bytes);
      if(ao_buffersize==-1) ao_buffersize=dxr3_buf_info.bytes;
      ao_outburst=dxr3_buf_info.fragsize;
  }

  if(ao_buffersize==-1){
    // Measuring buffer size:
    void* data;
    ao_buffersize=0;
#ifdef HAVE_AUDIO_SELECT
    data=malloc(ao_outburst); memset(data,0,ao_outburst);
    while(ao_buffersize<0x40000){
      fd_set rfds;
      struct timeval tv;
      FD_ZERO(&rfds); FD_SET(fd_audio,&rfds);
      tv.tv_sec=0; tv.tv_usec = 0;
      if(!select(fd_audio+1, NULL, &rfds, NULL, &tv)) break;
      write(fd_audio,data,ao_outburst);
      ao_buffersize+=ao_outburst;
    }
    free(data);
    if(ao_buffersize==0){
        printf("\nAO: [dxr3]   ***  Your audio driver DOES NOT support select()  ***\n");
          printf("Recompile mplayer with #undef HAVE_AUDIO_SELECT in config.h !\n\n");
        return 0;
    }
#endif
  }

  ioval = EM8300_PLAYMODE_PLAY;
  if( ioctl( fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval ) < 0 )
    printf( "AO: [dxr3] Unable to set playmode\n" );
  close( fd_control );

  return 1;
}

// close audio device
static void uninit()
{
    printf( "AO: [dxr3] Uninitializing\n" );
    if( ioctl(fd_audio, SNDCTL_DSP_RESET, NULL) < 0 )
	printf( "AO: [dxr3] Unable to reset device\n" );
    close( fd_audio );
}

// stop playing and empty buffers (for seeking/pause)
static void reset()
{
    if( ioctl(fd_audio, SNDCTL_DSP_RESET, NULL) < 0 )
	printf( "AO: [dxr3] Unable to reset device\n" );
}

// stop playing, keep buffers (for pause)
static void audio_pause()
{
    // for now, just call reset();
//  reset();
  int ioval;
  fd_control = open( "/dev/em8300", O_WRONLY );
  if( fd_control < 0 )
    printf( "AO: [dxr3] Oops, unable to pause playback\n" );
  else
  {
    ioval = EM8300_PLAYMODE_PAUSED;
    if( ioctl( fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval ) < 0 )
	printf( "AO: [dxr3] Unable to pause playback\n" );
    close( fd_control );
  }
}

// resume playing, after audio_pause()
static void audio_resume()
{
  int ioval;
  fd_control = open( "/dev/em8300", O_WRONLY );
  if( fd_control < 0 )
    printf( "AO: [dxr3] Oops, unable to resume playback\n" );
  else
  {
    ioval = EM8300_PLAYMODE_PLAY;
    if( ioctl( fd_control, EM8300_IOCTL_SET_PLAYMODE, &ioval ) < 0 )
	printf( "AO: [dxr3] Unable to resume playback\n" );
    close( fd_control );
  }
}


// return: how many bytes can be played without blocking
static int get_space()
{
    int space = 0;
    if( ioctl(fd_audio, SNDCTL_DSP_GETOSPACE, &dxr3_buf_info) < 0 )
    {
	printf( "AO: [dxr3] Unable to get free space in buffer\n" );
	return 0;
    }
    
    space = dxr3_buf_info.fragments*dxr3_buf_info.fragsize;
    return space;
}

static int play(void* data,int len,int flags)
{
    int pts = ao_pts;
    if( ioctl( fd_audio, EM8300_IOCTL_AUDIO_SETPTS, &pts ) < 0 )
	printf( "AO: [dxr3] Unable to set pts\n" );
    return write(fd_audio,data,len);
}

// return: how many unplayed bytes are in the buffer
static int get_delay()
{
     int r=0;
     if( ioctl(fd_audio, SNDCTL_DSP_GETODELAY, &r) < 0 )
        printf( "AO: [dxr3] Unable to get unplayed bytes in buffer\n" );
     return r;
}