annotate configure @ 5029:ef8a43b74075

Add IJPG decoder.

#! /bin/sh
#
# Original version (C) 2000 Pontscho/fresh!mindworkz
#                      [e-mail]
#
# History / Contributors: check the cvs log !
#
# Cleanups all over the place (c) 2001 pl
#
#
# Guidelines:
# If the option is named 'opt':
#   _opt : should have a value in yes/no/auto
#   _def_opt : '#define ... 1' or '#undef ...' that is: some C code
#   _ld_opt : ' -L/path/dir -lopt ' that is: some GCC option
#   _inc_opt : ' -I/path/dir/include '
#
# In this file, a tab is 8 chars and indentation shift is 2 characters
#
# GOTCHAS:
#  - config files are currently:
#    config.h config.mak libvo/config.mak libao2/config.mak
#    Gui/config.mak libvo2/config.mak
#
#############################################################################

# Prefer these macros to full length text !
# These macros only return an error code - NO display is done
cc_check() {
  echo >> "$TMPLOG"
  cat "$TMPC" >> "$TMPLOG"
  echo >> "$TMPLOG"
  echo "$_cc $_inc_extra $_ld_static $_ld_extra $TMPC -o $TMPO $@" >> "$TMPLOG"
  > "$TMPO"
  ( "$_cc" $_inc_extra $_ld_static $_ld_extra "$TMPC" -o "$TMPO" "$@" ) >> "$TMPLOG" 2>&1
  TMP="$?"
  echo >> "$TMPLOG"
  echo "ldd $TMPO" >> "$TMPLOG"
  ( ldd "$TMPO" ) >> "$TMPLOG" 2>&1
  echo >> "$TMPLOG"
  return "$TMP"
}

# Display error message, flushes tempfile, exit
die () {
  echo
  echo "Error: $@" >&2
  echo >&2
  rm -f "$TMPO" "$TMPC" "$TMPS" "$TMPCPP"
  echo "Check "$TMPLOG" if you do not understand why it failed."
  exit 1
}

# OS test booleans functions
issystem() {
  test "`echo $system_name | tr A-Z a-z`" = "`echo $1 | tr A-Z a-z`"
}
linux()   { issystem "Linux"   ; return "$?" ; }
sunos()   { issystem "SunOS"   ; return "$?" ; }
irix()    { issystem "IRIX"    ; return "$?" ; }
cygwin()  { issystem "CYGWIN"  ; return "$?" ; }
freebsd() { issystem "FreeBSD" ; return "$?" ; }
netbsd()  { issystem "NetBSD"  ; return "$?" ; }
bsdos()   { issystem "BSD/OS"  ; return "$?" ; }
openbsd() { issystem "OpenBSD" ; return "$?" ; }
bsd()     { freebsd || netbsd || bsdos || openbsd ; return "$?" ; }
qnx()     { issystem "QNX"     ; return "$?" ; }

# arch test boolean functions
x86() {
  case "$host_arch" in
    i[3-9]86|x86*) return 0 ;;
    *) return 1 ;;
  esac
}

# Use this before starting a check
echocheck() {
  echo "============ Checking for $@ ============" >> "$TMPLOG"
  echo ${_echo_n} "Checking for $@ ... ${_echo_c}"
}

# Use this to echo the results of a check
echores() {
  echo "Result is: $@" >> "$TMPLOG"
  echo "##########################################" >> "$TMPLOG"
  echo "" >> "$TMPLOG"
  echo "$@"
}
#############################################################################

# Check how echo works in this /bin/sh
case `echo -n` in
  -n)	_echo_n=	_echo_c='\c'	;;	# SysV echo
  *)	_echo_n='-n '	_echo_c=	;;	# BSD echo
esac

LANGUAGES=`echo help_mp-??.h | sed "s/help_mp-\(..\).h/\1/g"`

for parm in "$@" ; do
  if test "$parm" = "--help" || test "$parm" = "-help" || test "$parm" = "-h" ; then
    cat << EOF

Usage: $0 [OPTIONS]...

Configuration:
  -h, --help             display this help and exit

Installation directories:
  --prefix=DIR           use this prefix for installing mplayer [/usr/local]
  --datadir=DIR          use this prefix for installing machine independent
                         data files (fonts, skins) [PREFIX/share/mplayer]
  --confdir=DIR          use this prefix for installing configuration files
                         [same as datadir]

Optional features:
  --disable-mencoder     disable mencoder [autodetect]
  --enable-largefiles    enable support for files >2^32 bytes long [disable]
  --enable-linux-devfs   set default devices to devfs ones [disable]
  --enable-termcap       use termcap database for key codes [autodetect]
  --enable-lirc          enable LIRC (remote control) support [autodetect]
  --enable-gui           enable GUI [disable]
  --enable-png		 enable png support [autodetect]
  --enable-jpeg		 enable jpeg support [autodetect]
  --disable-tv           disable TV Interface (tv/dvb grabbers) [enable]
  --disable-tv-v4l       disable Video 4 Linux TV Interface support [autodetect]
  --disable-win32        disable Win32 DLL support [autodetect]
  --disable-dshow        disable DirectShow support [autodetect]
  --disable-xanim        disable XAnim DLL support [autodetect]
  --disable-xvid         disable XviD codec [autodetect]
  --disable-divx4linux   disable DivX4linux codec [autodetect]
  --disable-opendivx     disable OpenDivx codec [enable]
  --enable-vorbis        build with OggVorbis support [autodetect]
  --disable-iconv        do not use iconv(3) function [autodetect]
  --disable-rtc          disable RTC (/dev/rtc) on Linux [autodetect]
  --disable-mp1e         disable libmp1e support
                         (use this option if it does not compile) [enable] 
  --disable-streaming    disable network streaming support
                         (support for: http/mms/rtp) [enable]
  --disable-vidix        disable VIDIX stuff [enable]
  --disable-new-input    disable new input system [enable]
  --enable-joystick      enable joystick support in new input [disable]
Video:
  --enable-gl            build with OpenGL render support [autodetect]
  --enable-dga[=n]       build with DGA [n in {1, 2} ] support [autodetect]
  --enable-vesa          build with VESA support [autodetect]
  --enable-svga          build with SVGAlib support [autodetect]
  --enable-sdl           build with SDL render support [autodetect]
  --enable-aa            build with AAlib render support [autodetect]
  --enable-ggi           build with GGI render support [autodetect]
  --enable-dxr3          build with DXR3/H+ render support [autodetect]
  --enable-dvb           build with support for output via DVB-Card [autodetect]
  --enable-mga           build with mga_vid support
                         (check for /dev/mga_vid) [autodetect]
  --enable-xmga          build with mga_vid X Window support
                         (check for X & /dev/mga_vid) [autodetect]
  --enable-xv            build with Xv render support for X 4.x [autodetect]
  --enable-vm            build with XF86VidMode support for X11 [autodetect]
  --enable-xinerama      build with Xinerama support for X11 [autodetect]
  --enable-x11           build with X11 render support [autodetect]
  --enable-fbdev         build with FBDev render support [autodetect]
  --enable-fbdev=nocopy  yuv12 converts directly into framebuffer
  --enable-mlib          build with MLIB support (Solaris only) [autodetect]
  --enable-3dfx          build with 3dfx support [disable]
  --enable-tdfxfb        build with tdfxfb support [disable]
  --enable-directfb      build with DirectFB support [autodetect]
  --enable-zr            build with ZR36067/ZR36060 support [disable]

Audio:
  --disable-ossaudio     disable OSS sound support [autodetect]
  --disable-alsa         disable alsa sound support [autodetect]
  --disable-sunaudio     disable Sun sound support [autodetect]
  --disable-mad          disable mad audio support [autodetect]
  --disable-select       disable using select() on OSS audio device [enable]

Miscellaneous options:
  --cc=COMPILER          use this C compiler to build MPlayer [gcc]
  --target=PLATFORM      target platform (i386-linux, arm-linux, etc)
  --enable-static        build a statically linked binary. If more linking
                         options needed : --enable-static="-lslang -lncurses"
  --language=xx          select a language [en]
                         (Available: $LANGUAGES)

Advanced options:
  --enable-mmx           build with mmx support [autodetect]
  --enable-mmx2          build with mmx2 support (PIII, Athlon) [autodetect]
  --enable-3dnow         build with 3dnow! support [autodetect]
  --enable-3dnowex       build with 3dnow-dsp! support (K7) [autodetect]
  --enable-sse           build with sse support [autodetect]
  --enable-sse2          build with sse2 support [autodetect]
  --disable-fastmemcpy   disable 3dnow/sse/mmx optimized memcpy() [enable]
  --enable-debug[=1-3]   compile debugging information into mplayer [disable]
  --enable-profile       compile profiling information into mplayer [disable]

Hazardous options a.k.a. "DO NOT BUGREPORT ANYTHING !"
  --disable-gcc-checking   disable gcc version checking [enable]

Use these options if autodetection fails:
  --with-extraincdir=DIR   extra headers (png, dvb, mad, sdl, css, ...) in DIR
  --with-extralibdir=DIR   extra library files (png, SDL, ...) in DIR
  --with-x11incdir=DIR     X headers in DIR
  --with-x11libdir=DIR     X library files in DIR
  --with-csslibdir=DIR     libcss in DIR
  --with-madlibdir=DIR     libmad (libmad shared lib.) in DIR
  --with-mlibdir=DIR       libmlib (MLIB support) in DIR (Solaris only)
  --with-win32libdir=DIR   W*ndows DLL files in DIR
  --with-xanimlibdir=DIR   XAnim DLL files in DIR
  --with-xvidcore=PATH     path to XviD libcore.a (e.g: /opt/lib/libcore.a)
  --with-sdl-config=PATH   path to sdl*-config (e.g.: /opt/bin/sdl-config)
  --with-gtk-config=PATH   path to gtk*-config (e.g.: /opt/bin/gtk-config)
  --with-glib-config=PATH  path to glib*-config (e.g.: /opt/bin/glib-config)

EOF
    exit 0
  fi
done # for parm in ...


# 1st pass checking for vital options
_cc=gcc
test "$CC" && _cc="$CC"
_as=auto
_enable_xp=no
for ac_option do
  case "$ac_option" in
  --target=*)
    _target=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --cc=*)
    _cc=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --as=*)
    _as=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --enable-gcc-checking)
    _skip_cc_check=no
    ;;
  --disable-gcc-checking)
    _skip_cc_check=yes
    ;;
  --enable-xp)
    _enable_xp=yes
    ;;
  --disable-xp)
    _enable_xp=no
    ;;
  --enable-static)
    _ld_static='-static'
    ;;
  --disable-static)
    _ld_static=''
    ;;
  --enable-static=*)
    _ld_static="-static `echo $ac_option | cut -d '=' -f 2`"
    ;;
  --with-extraincdir=*)
    _inc_extra=-I`echo $ac_option | cut -d '=' -f 2 | sed 's,:, -I,g'`
    ;;
  --with-extralibdir=*)
    _ld_extra=-L`echo $ac_option | cut -d '=' -f 2 | sed 's,:, -L,g'`
    ;;
  esac
done

# Determine our OS name and CPU architecture
if test -z "$_target" ; then
  # OS name
  system_name=`( uname -s ) 2>&1`
  case "$system_name" in
  Linux|FreeBSD|NetBSD|BSD/OS|OpenBSD|SunOS|QNX)
    ;;
  IRIX*)
    system_name=IRIX
    ;;
  [cC][yY][gG][wW][iI][nN]*)
    system_name=CYGWIN
    ;;
  *)
    system_name="$system_name-UNKNOWN"
    ;;
  esac


  # host's CPU/instruction set
   host_arch=`( uname -p ) 2>&1`
   case "$host_arch" in
   i386|sparc|ppc|alpha|arm|mips)
     ;;

   *) # uname -p on Linux returns 'unknown' for the processor type,
      # OpenBSD returns 'Intel Pentium/MMX ("Genuine Intel" 586-class)'

      # Maybe uname -m (machine hardware name) returns something we
      # recognize.

      case "`( uname -m ) 2>&1`" in
      i[3-9]86|x86*) host_arch=i386 ;;
      ppc) host_arch=ppc ;;
      alpha) host_arch=alpha ;;
      sparc*) host_arch=sparc ;;
      arm*) host_arch=arm ;;
      *) host_arch=UNKNOWN ;;
    esac
    ;;
  esac
else
  system_name=`echo $_target | cut -d '-' -f 2`
  host_arch=`echo $_target | cut -d '-' -f 1`
fi

echo "Detected operating system: $system_name"
echo "Detected host architecture: $host_arch"

# LGB: temporary files
for I in "$TMPDIR" "$TEMPDIR" "/tmp" ; do
  test "$I" && break
done

TMPLOG="configure.log"
rm -f "$TMPLOG"
TMPC="$I/mplayer-conf-$RANDOM-$$.c"
TMPCPP="$I/mplayer-conf-$RANDOM-$$.cpp"
TMPO="$I/mplayer-conf-$RANDOM-$$.o"
TMPS="$I/mplayer-conf-$RANDOM-$$.S"

# config files

# FIXME: A lot of stuff is installed under /usr/local
# NK: But we should never use this stuff implicitly since we call compiler
# from /usr we should be sure that there no effects from other compilers
# (libraries) which might be installed into /usr/local.  Let users use this
# stuff explicitly as command line argument.  In other words: It would be
# resonable have or only /usr/include or only /usr/local/include.

if freebsd ; then
  _ld_extra="$_ld_extra -L/usr/local/lib"
  _inc_extra="$_inc_extra -I/usr/local/include"
fi


# Checking CC version...
# gcc-3.0 merges optimizations coming from egcs, pgcc, agcc, ...
if test "$_skip_cc_check" != yes ; then
  echocheck "$_cc version"
  # also check for name (the version checking is only for _gcc_ up for now)
  # FIXME implement this in ver. check.
  cc_name=`$_cc -v 2>&1 | tail -1 | cut -d ' ' -f 1`
  cc_version=`$_cc -v 2>&1 | sed -n 's/^.*version \([aegcygnustp-]*[0-9.]*\).*$/\1/p'`
  case $cc_version in
    '')
      cc_version="v. ?.??, bad"
      cc_verc_fail=yes
      ;;
    2.95.[2-9]|2.95.[2-9].[0-9]|3.[0-9]|3.[0-9].[0-9])
      cc_version="$cc_version, ok"
      cc_verc_fail=no
      ;;
    *)
      cc_version="$cc_version, bad"
      cc_verc_fail=yes
      ;;
  esac
  echores "$cc_version"
  # If gcc version is crappy RH one, then check if the user has installed the optional
  # (at least in Rh7.2) gcc3 packages to save them some pain - [e-mail]
  if test "$cc_verc_fail" = yes ; then
    echocheck "gcc3 version"
    _cc=gcc3
    cc_version=`$_cc -v 2>&1 | sed -n 's/^.*version \([aegcygnustp-]*[0-9.]*\).*$/\1/p'`
    case $cc_version in
      '')
        cc_version="v. ?.??, bad"
	cc_verc_fail=yes
	;;
      2.95.[2-9]|2.95.[2-9].[0-9]|3.[0-9]|3.[0-9].[0-9])
        cc_version="$cc_version, ok"
        cc_verc_fail=no
        ;;
      *)
        cc_version="$cc_version, bad"
        cc_verc_fail=yes
        ;;
    esac
    echores "$cc_version"
  fi
  if test "$cc_verc_fail" = yes ; then
    cat <<EOF

*** Please downgrade/upgrade C compiler to gcc-2.95.x or gcc-3.x version! ***

You are using a different compiler than ours. We do not have the time to make
sure everything works with compilers than the one we use.  Use either use the
same compiler as ours, or use --disable-gcc-checking but DO *NOT* REPORT BUGS
unless you can reproduce them after recompiling with 2.95.x or 3.0.x version!

Note for gcc 2.96 users: some versions of this compiler are known to miscompile
mplayer and lame (which is used for mencoder).  If you get compile errors,
first upgrade to the latest 2.96 release (but minimum 2.96-85) and try again.
If the problem still exists, try with gcc 3.0.x (or 2.95.x) *BEFORE* reporting
bugs!

        GCC 2.96 IS NOT AND WILL NOT BE SUPPORTED BY US !

     *** For details please read DOCS/gcc-2.96-3.0.html ***

EOF
    die "Bad gcc version"
  fi
else
cat <<EOF

******************************************************************************

Hmm. You really want to compile MPlayer with an *UNSUPPORTED* C compiler?
Ok. You know. Do it. But did you already read DOCS/gcc-2.96-3.0.html ???

DO NOT SEND BUGREPORTS OR COMPLAIN, it's *YOUR* compiler's fault!
Get ready for mysterious crashes, no-picture bugs, strange noises... REALLY!
Lame which is used by mencoder produces weird errors, too.

If you have any problem, then install GCC 2.95.x or 3.x version and try again.
If the problem _still_ exists, then read DOCS/bugreports.html !

  *** DO NOT SEND BUGREPORTS OR COMPLAIN it's *YOUR* compiler's fault! ***

******************************************************************************

EOF

read _answer

fi
# ---

# now that we know what compiler should be used for compilation, try to find
# out which assembler is used by the $_cc compiler
if test "$_as" = auto ; then
  _as=`$_cc -print-prog-name=as`
  test -z "$_as" && _as=as
fi

# Try to find the available options for the current CPU
if x86 ; then
  if test -r /proc/cpuinfo ; then
    # linux with /proc mounted, extract cpu information from it
    _cpuinfo="cat /proc/cpuinfo"
  elif test -r /compat/linux/proc/cpuinfo ; then
    # FreeBSD with linux emulation /proc mounted,
    # extract cpu information from it
    _cpuinfo="cat /compat/linux/proc/cpuinfo"
  else
    # all other OS try to extract cpu information from a small helper
    # program TOOLS/cpuinfo instead
    $_cc -o TOOLS/cpuinfo TOOLS/cpuinfo.c
    _cpuinfo="TOOLS/cpuinfo"
  fi

  pname=`$_cpuinfo | grep 'model name' | cut -d ':' -f 2 | head -1`
  pvendor=`$_cpuinfo | grep 'vendor_id' | cut -d ':' -f 2  | cut -d ' ' -f 2 | head -1`
  pfamily=`$_cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2 | head -1`
  pmodel=`$_cpuinfo | grep -v 'model name' | grep 'model' | cut -d ':' -f 2 | cut -d ' ' -f 2 | head -1`
  pstepping=`$_cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2 | head -1`

  pparam=`$_cpuinfo | grep 'features' | cut -d ':' -f 2 | head -1`
  if test -z "$pparam" ; then
    pparam=`$_cpuinfo | grep 'flags' | cut -d ':' -f 2 | head -1`
  fi

  _mmx=no
  _3dnow=no
  _3dnowex=no
  _mmx2=no
  _sse=no
  _sse2=no
  _mtrr=no

  for i in $pparam ; do
    case "$i" in
    3dnow)        _3dnow=yes               ;;
    3dnowext)     _3dnow=yes  _3dnowex=yes ;;
    mmx)          _mmx=yes                 ;;
    mmxext)       _mmx2=yes                ;;
    mtrr|k6_mtrr) _mtrr=yes                ;;
    xmm|sse|kni)  _sse=yes    _mmx2=yes	   ;;
    sse2)         _sse2=yes                ;;
    esac
  done

  echocheck "CPU vendor"
  echores "$pvendor ($pfamily:$pmodel:$pstepping)"

  echocheck "CPU type"
  echores "$pname"

fi


if [ "$host_arch" = alpha ]; then
  echocheck "CPU type"
cat > $TMPC << EOF
int main() {
    unsigned long ver, mask;
    asm ("implver %0" : "=r" (ver));
    asm ("amask %1, %0" : "=r" (mask) : "r" (-1));
    printf("%ld-%x\n", ver, ~mask);
    return 0;
}
EOF
  $_cc -o "$TMPO" "$TMPC"
  case `"$TMPO"` in
    0-0) proc="ev4" ;;
    1-0) proc="ev5" ;;
    1-1) proc="ev56" ;;
    1-101) proc="pca56" ;;
    2-303) proc="ev6" ;;
    2-307) proc="ev67" ;;
    2-1307) proc="ev68" ;;
  esac
  echores "$proc"
fi


case "$host_arch" in
  i[3-9]86|x86*)
  _def_arch="#define ARCH_X86 1"
  _target_arch="TARGET_ARCH_X86 = yes"
  _def_words_endian="#undef WORDS_BIGENDIAN"
  iproc=586
  proc=pentium

  case "$pvendor" in
  AuthenticAMD)
    case "$pfamily" in
    3) proc=i386 iproc=386 ;;
    4) proc=i486 iproc=486 ;;
    5) proc=k5 iproc=586       # LGB: models are: K5/SSA5 K5 K5 K5 ? ? K6 K6 K6-2 K6-3
       test "$pmodel" -ge 6 && proc=k6 ;;
    6|7) proc=k7 iproc=686 ;;
    *) proc=pentium iproc=586 ;;
    esac
    ;;
  GenuineIntel)
    case "$pfamily" in
    3) proc=i386 iproc=386 ;;
    4) proc=i486 iproc=486 ;;
    5) proc=pentium iproc=586 ;;
    6|15) proc=i686 iproc=686 ;;
    *) proc=pentium iproc=586 ;;
    esac
    ;;
  unknown)
    case "$pfamily" in
    3) proc=i386 iproc=386 ;;
    4) proc=i486 iproc=486 ;;
    *) proc=pentium iproc=586 ;;
    esac
    ;;
  *)
    proc=pentium iproc=586 ;;
  esac

    # check that gcc supports our cpu, if not, fallback to pentium
    # LGB: check -mcpu and -march swithing step by step with enabling
    # to fall back till 386.

    echocheck "GCC & CPU optimization abilities"
cat > $TMPC << EOF
int main(void) { return 0; }
EOF

    if test "$proc" = "k7" ; then
      cc_check -march=$proc -mcpu=$proc || proc=athlon
    fi
    if test "$proc" = "athlon" ; then
      cc_check -march=$proc -mcpu=$proc || proc=pentiumpro
    fi
    if test "$proc" = "k6" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=k5
    fi
    if test "$proc" = "k5" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=pentium
    fi
    if test "$proc" = "i686" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=pentiumpro
    fi
    if test "$proc" = "pentiumpro" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=pentium
    fi
    if test "$proc" = "pentium" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=i486
    fi
    if test "$proc" = "i486" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=i386
    fi
    if test "$proc" = "i386" ; then
      cc_check -march=$proc -mcpu=$proc  || proc=error
    fi
    if test "$proc" = "error" ; then
      die "Your $_cc does not support even \"i386\" for '-march' and '-mcpu'."
    fi

    _march="-march=$proc"
    _mcpu="-mcpu=$proc"

    ## Gabucino : --target takes effect here (hopefully...) by overwriting
    ##             autodetected mcpu/march parameters
    if test "$_target" ; then
      _march="-march=$host_arch"
      _mcpu="-mcpu=$host_arch"
      proc="$_target"
      # Note: this has to be extended
      case "$proc" in
        i386*) iproc=386 ;;
        i486*) iproc=486 ;;
        i586*) iproc=586 ;;
        i686*) iproc=686 ;;
        *) iproc=586 ;;
      esac
    fi

    echores "$proc"
    ;;

  sparc)
    _def_arch='#define ARCH_SPARC 1'
    _target_arch='TARGET_ARCH_SPARC = yes'
    _def_words_endian='#define WORDS_BIGENDIAN 1'
    iproc='sparc'
    proc='v8'
    _march=''
    _mcpu="-mcpu=$proc"
    ;;

  arm)
    _def_arch="#define ARCH_ARM 1"
    _target_arch='TARGET_ARCH_ARM = yes'
    _def_words_endian='#undef WORDS_BIGENDIAN'
    iproc=arm
    proc=''
    _march=''
    _mcpu=''
    ;;

  ppc)
    _def_arch='#define ARCH_PPC 1'
    _target_arch='TARGET_ARCH_PPC = yes'
    _def_words_endian='#define WORDS_BIGENDIAN 1'
    iproc='ppc'
    proc=''
    _march=''
    _mcpu=''
    ;;

  alpha)
    _def_arch='#define ARCH_ALPHA 1'
    _target_arch='TARGET_ARCH_ALPHA = yes'
    _def_words_endian='#undef WORDS_BIGENDIAN'
    iproc='alpha'
    _march=''
    echocheck "GCC & CPU optimization abilities"
    if test "$proc" = "ev68" ; then
      cc_check -mcpu=$proc || proc=ev67
    fi
    if test "$proc" = "ev67" ; then
      cc_check -mcpu=$proc || proc=ev6
    fi
    _mcpu="-mcpu=$proc"
    echores "$proc"
    ;;

  mips)
    _def_arch="#define ARCH_SGI_MIPS 1"
    _target_arch="TARGET_ARCH_SGI_MIPS = yes"
    _def_words_endian='#define WORDS_BIGENDIAN 1'
    iproc='sgi-mips'
    proc=''
    _march=''
    _mcpu=''
    ;;

  *)
    echo "The architecture of your CPU ($host_arch) is not supported by this configure script"
    echo "It seems noone has ported MPlayer to your OS or CPU type yet."
    die "unsupported architecture $host_arch"
    ;;
esac


echocheck "binutils"
_binutils=no
$_as libac3/downmix/downmix_i386.S -o $TMPO > /dev/null 2>&1 && _binutils=yes
echores "$_binutils"

if x86 ; then
  extcheck() {
    if test "$1" = yes ; then
      echocheck "kernel support of $2"
      cat > $TMPC <<EOF
int main(void){__asm__ __volatile__ ("$3":::"memory");return(0);}
EOF

      if ( cc_check && $TMPO ) > /dev/null 2>&1 ; then
        echores "yes"
        return 0
      else
        echores "failed"
        echo "It seems that your kernel does not correctly support $2."
        echo "To use $2 extensions in MPlayer, you have to upgrade/recompile your kernel!"
        return 1
      fi
    fi
    return 1
  }

  extcheck $_mmx "mmx" "emms" || _mmx=no
  extcheck $_3dnow "3dnow" "femms" || _3dnow=no
  extcheck $_3dnowex "3dnowex" "pswapd %%mm0, %%mm0" || _3dnowex=no
  extcheck $_mmx2 "mmx2" "sfence" || _mmx2=no
  extcheck $_sse "sse" "xorps %%xmm0, %%xmm0" || _sse=no
  extcheck $_sse2 "sse2" "xorpd %%xmm0, %%xmm0" || _sse2=no
  echocheck "mtrr support"
  echores "$_mtrr"

fi


_prefix="/usr/local"

# GOTCHA: the variables below defines the default behavior for autodetection
# and have - unless stated otherwise - at least 2 states : yes no
# If autodetection is available then the third state is: auto
_libavcodec=auto
_libavcodecso=no # changed default to no as it causes problems - atmos
_mp1e=auto
_mencoder=yes
_x11=auto
_dga=auto	# 1 2 no auto
_xv=auto
_sdl=auto
_nas=auto
_png=auto
_jpg=auto
_gl=auto
_ggi=auto
_aa=auto
_svga=auto
_vesa=auto
_fbdev=auto
_fbdev_nocopy=no
_dvb=auto
_dxr3=auto
_iconv=auto
_rtc=auto
_ossaudio=auto
_mad=auto
_vorbis=auto
_css=auto
_dvdread=auto
_xanim=auto
_xinerama=auto
_mga=auto
_xmga=auto
_vm=auto
_mlib=auto
_sgiaudio=auto
_sunaudio=auto
_alsa=auto
_fastmemcpy=yes
_win32=auto
_dshow=yes
_select=yes
_tv=yes
_tv_v4l=auto
_streaming=yes
_vidix=yes
_new_input=yes
_joystick=no
_xvid=auto
_divx4linux=auto
_opendivx=yes
_lirc=auto
_gui=no
_termcap=auto
_termios=auto
_3dfx=no
_tdfxfb=no
_directfb=auto
_zr=no
_largefiles=no
_vo2=no
_language=en
_shm=auto
_linux_devfs=no

for ac_option do
  case "$ac_option" in
  # Skip 1st pass
  --target=*) ;;
  --cc=*) ;;
  --as=*) ;;
  --enable-gcc-checking) ;;
  --disable-gcc-checking) ;;
  --enable-static*) ;;
  --disable-static*) ;;
  --with-extraincdir=*) ;;
  --with-extralibdir=*) ;;


  # Real 2nd pass
  --enable-mencoder)	_mencoder=yes	;;
  --disable-mencoder)	_mencoder=no	;;
  --enable-x11)		_x11=yes	;;
  --disable-x11)	_x11=no		;;
  --enable-xv)		_xv=yes		;;
  --disable-xv)		_xv=no		;;
  --enable-sdl)		_sdl=yes	;;
  --disable-sdl)	_sdl=no		;;
  --enable-nas)		_nas=yes	;;
  --disable-nas)	_nas=no		;;
  --enable-png)		_png=yes	;;
  --disable-png)	_png=no		;;
  --enable-jpeg)	_jpg=yes	;;
  --disable-jpeg)	_jpg=no		;;
  --enable-gl)		_gl=yes		;;
  --disable-gl)		_gl=no		;;
  --enable-ggi)		_ggi=yes	;;
  --disable-ggi)	_ggi=no		;;
  --enable-aa)		_aa=yes		;;
  --disable-aa)		_aa=no		;;
  --enable-svga)	_svga=yes	;;
  --disable-svga)	_svga=no	;;
  --enable-vesa)	_vesa=yes	;;
  --disable-vesa)	_vesa=no	;;
  --enable-fbdev)	_fbdev=yes	;;
  --enable-fbdev=nocopy) _fbdev=yes; _fbdev_nocopy=yes	;;
  --disable-fbdev)	_fbdev=no	;;
  --enable-dvb)		_dvb=yes	;;
  --disable-dvb)        _dvb=no		;;
  --enable-dxr3)	_dxr3=yes	;;
  --disable-dxr3)	_dxr3=no	;;
  --enable-iconv)	_iconv=yes	;;
  --disable-iconv)	_iconv=no	;;
  --enable-rtc)	        _rtc=yes	;;
  --disable-rtc)	_rtc=no	        ;;
  --enable-mp1e)	_mp1e=yes	;;
  --disable-mp1e)	_mp1e=no	;;
  --enable-ossaudio)	_ossaudio=yes	;;
  --disable-ossaudio)	_ossaudio=no	;;
  --enable-mad)		_mad=yes	;;
  --disable-mad)	_mad=no		;;
  --enable-vorbis)	_vorbis=yes	;;
  --disable-vorbis)	_vorbis=no	;;
  --enable-css)		_css=yes	;;
  --disable-css)	_css=no		;;
  --enable-dvdread)	_dvdread=yes	;;
  --disable-dvdread)	_dvdread=no	;;
  --enable-xanim)	_xanim=yes	;;
  --disable-xanim)	_xanim=no	;;
  --enable-xinerama)	_xinerama=yes	;;
  --disable-xinerama)	_xinerama=no	;;
  --enable-mga)		_mga=yes	;;
  --disable-mga)	_mga=no		;;
  --enable-xmga)	_xmga=yes	;;
  --disable-xmga)	_xmga=no	;;
  --enable-vm)		_vm=yes		;;
  --disable-vm)		_vm=no		;;
  --enable-mlib)	_mlib=yes	;;
  --disable-mlib)	_mlib=no	;;
  --enable-sunaudio)	_sunaudio=yes	;;
  --disable-sunaudio)	_sunaudio=no	;;
  --enable-sgiaudio)	_sgiaudio=yes	;;
  --disable-sgiaudio)	_sgiaudio=no	;;
  --enable-alsa)	_alsa=yes	;;
  --disable-alsa)	_alsa=no	;;
  --enable-tv)		_tv=yes		;;
  --disable-tv)		_tv=no		;;
  --enable-tv-v4l)	_tv_v4l=yes	;;
  --disable-tv-v4l)	_tv_v4l=no	;;
  --enable-fastmemcpy)	_fastmemcpy=yes	;;
  --disable-fastmemcpy)	_fastmemcpy=no	;;
  --enable-streaming)	_streaming=yes	;;
  --disable-streaming)	_streaming=no	;;
  --enable-vidix)	_vidix=yes	;;
  --disable-vidix)	_vidix=no	;;
  --enable-new-input)	_new_input=yes	;;
  --disable-new-input)	_new_input=no	;;
  --enable-joystick)	_joystick=yes	;;
  --disable-joystick)	_joystick=no	;;
  --enable-xvid)	_xvid=yes	;;
  --disable-xvid)	_xvid=no	;;
  --enable-divx4linux)	_divx4linux=yes	;;
  --disable-divx4linux)	_divx4linux=no	;;
  --enable-opendivx)	_opendivx=yes	;;
  --disable-opendivx)	_opendivx=no	;;
  --enable-lirc)	_lirc=yes	;;
  --disable-lirc)	_lirc=no	;;
  --enable-gui)		_gui=yes	;;
  --disable-gui)	_gui=no		;;
  --enable-termcap)	_termcap=yes	;;
  --disable-termcap)	_termcap=no	;;
  --enable-termios)	_termios=yes    ;;
  --disable-termios)    _termios=no     ;;
  --enable-3dfx)	_3dfx=yes	;;
  --disable-3dfx)	_3dfx=no	;;
  --enable-tdfxfb)	_tdfxfb=yes	;;
  --disable-tdfxfb)	_tdfxfb=no	;;
  --enable-directfb)	_directfb=yes	;;
  --disable-directfb)	_directfb=no	;;
  --enable-zr)		_zr=yes		;;
  --disable-zr)		_zr=no		;;
  --enable-mtrr)	_mtrr=yes	;;
  --disable-mtrr)	_mtrr=no	;;
  --enable-largefiles)	_largefiles=yes	;;
  --disable-largefiles)	_largefiles=no	;;
  --enable-vo2)		_vo2=yes	;;
  --disable-vo2)	_vo2=no		;;
  --enable-shm)		_shm=yes	;;
  --disable-shm)	_shm=no         ;;
  --enable-select)	_select=yes	;;
  --disable-select)	_select=no	;;
  --enable-linux-devfs)	_linux_devfs=yes	;;
  --disable-linux-devfs)	_linux_devfs=no	;;

  --enable-dga) _dga=auto ;; # as we don't know if it's 1 or 2
  --enable-dga=*) _dga=`echo $ac_option | cut -d '=' -f 2` ;;
  --disable-dga) _dga=no ;;

  --language=*)
    LINGUAS=`echo $ac_option | cut -d '=' -f 2`
    ;;

  --with-win32libdir=*)
    _win32libdir=`echo $ac_option | cut -d '=' -f 2`
    _win32=yes
    ;;
  --with-xanimlibdir=*)
    _xanimlibdir=`echo $ac_option | cut -d '=' -f 2`
    _xanim=yes
    ;;
  --with-csslibdir=*)
    _csslibdir=`echo $ac_option | cut -d '=' -f 2`
    _css=yes
    ;;
  --with-mlibdir=*)
    _mlibdir=`echo $ac_option | cut -d '=' -f 2`
    _mlib=yes
    ;;

  --disable-profile)
    _profile=
    ;;
  --enable-profile)
    _profile='-p'
    ;;
  --enable-debug)
    _debug='-g'
    ;;
  --enable-debug=*)
    _debug=`echo $_echo_n '-g'$_echo_c; echo $ac_option | cut -d '=' -f 2`
    ;;

  --enable-sse)	_sse=yes ;;
  --disable-sse) _sse=no ;;
  --enable-sse2) _sse2=yes ;;
  --disable-sse2) _sse2=no ;;
  --enable-mmx2) _mmx2=yes ;;
  --disable-mmx2) _mmx2=no ;;
  --enable-3dnow) _3dnow=yes ;;
  --disable-3dnow) _3dnow=no _3dnowex=no ;;
  --enable-3dnowex) _3dnow=yes _3dnowex=yes ;;
  --disable-3dnowex) _3dnowex=no ;;
  --enable-mmx)	_mmx=yes ;;
  --disable-mmx) # without mmx 3Dnow! and stuff is also not possible
        _3dnow=no _3dnowex=no _mmx=no _mmx2=no ;;

  --enable-win32) _win32=yes ;;
  --disable-win32) _win32=no _dshow=no ;;
  --enable-dshow) _win32=yes _dshow=yes ;;
  --disable-dshow) _dshow=no ;;

  --with-x11incdir=*)
    _inc_x11=-I`echo $ac_option | cut -d '=' -f 2 | sed 's,:, -I,g'`
    ;;
  --with-x11libdir=*)
    _ld_x11=-L`echo $ac_option | cut -d '=' -f 2 | sed 's,:, -L,g'`
    ;;
  --with-xvidcore=*)
    _xvidcore=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --with-sdl-config=*)
    _sdlconfig=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --with-gtk-config=*)
    _gtkconfig=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --with-glib-config=*)
    _glibconfig=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --with-madlibdir=*)
    _ld_mad=-L`echo $ac_option | cut -d '=' -f 2 | sed 's,:, -L,g'`
    ;;

  --prefix=*)
    _prefix=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --datadir=*)
    _datadir=`echo $ac_option | cut -d '=' -f 2`
    ;;
  --confdir=*)
    _confdir=`echo $ac_option | cut -d '=' -f 2`
    ;;


  *)
    echo "Unknown parameter: $ac_option"
    ;;

  esac
done

# Atmos: moved this here, to be correct, if --prefix is specified
test -z "$_datadir" && _datadir="$_prefix/share/mplayer"
test -z "$_confdir" && _confdir="$_datadir"
test -z "$_libdir" && _libdir="$_prefix/lib/mplayer"
test -z "$_mlibdir" && _mlibdir="$MLIBHOME"

if x86 ; then
  # Checking assembler (_as) compatibility...
  # Added workaround for older as that reads from stdin by default - atmos
  as_version=`echo '' | $_as -version 2>&1 | sed -n 's/^.*assembler \(version \)*\([0-9.]*\).*$/\2/p'`
  echocheck "assembler ($_as $as_version)"

  _pref_as_version='2.9.1'
  echo 'nop' > $TMPS
  if test "$_mmx" = yes ; then
    echo 'emms' >> $TMPS
  fi
  if test "$_3dnow" = yes ; then
    _pref_as_version='2.10.1'
    echo 'femms' >> $TMPS
  fi
  if test "$_3dnowex" = yes ; then
    _pref_as_version='2.10.1'
    echo 'pswapd	%mm0, %mm0' >> $TMPS
  fi
  if test "$_mmx2" = yes ; then
    _pref_as_version='2.10.1'
    echo 'movntq	%mm0, (%eax)' >> $TMPS
  fi
  if test "$_sse" = yes ; then
    _pref_as_version='2.10.1'
    echo 'xorps %xmm0, %xmm0' >> $TMPS
  fi
  #if test "$_sse2" = yes ; then
  #  _pref_as_version='2.11'
  #  echo 'xorpd %xmm0, %xmm0' >> $TMPS
  #fi
  $_as $TMPS -o $TMPO > /dev/null 2>&1 || as_verc_fail=yes

  if test "$as_verc_fail" != yes ; then
    echores "ok"
  else
    echores "failed"
    echo "Upgrade binutils to ${_pref_as_version} ..."
    die "obsolete binutils version"
  fi
fi

_def_mmx='#undef HAVE_MMX'
test "$_mmx" = yes && _def_mmx='#define HAVE_MMX 1'
_def_mmx2='#undef HAVE_MMX2'
test "$_mmx2" = yes && _def_mmx2='#define HAVE_MMX2 1'
_def_3dnow='#undef HAVE_3DNOW'
test "$_3dnow" = yes && _def_3dnow='#define HAVE_3DNOW 1'
_def_3dnowex='#undef HAVE_3DNOWEX'
test "$_3dnowex" = yes && _def_3dnowex='#define HAVE_3DNOWEX 1'
_def_sse='#undef HAVE_SSE'
test "$_sse" = yes && _def_sse='#define HAVE_SSE 1'
_def_sse2='#undef HAVE_SSE2'
test "$_sse2" = yes && _def_sse2='#define HAVE_SSE2 1'


# Checking kernel version...
if x86 && linux ; then
  _k_verc_problem=no
  kernel_version=`uname -r 2>&1`
  echocheck "$system_name kernel version"
  case "$kernel_version" in
    '') kernel_version="?.??"; _k_verc_fail=yes;;
    [0-1].[0-9].[0-9]*|2.[0-3].[0-9]*)
      _k_verc_problem=yes;;
  esac
  if test "$_k_verc_problem" = yes && test "$_sse" = yes ; then
    _k_verc_fail=yes
  fi
  if test "$_k_verc_fail" ; then
    echores "$kernel_version, fail"
    echo "WARNING! If you want to run mplayer on this system, get prepared for problems!"
    echo "2.2.x has limited SSE support. Upgrade kernel or use --disable-sse if you"
    echo "experience crashes. MPlayer tries to autodetect if your kernel correctly supports"
    echo "SSE, but you have been warned! If you are using kernel older then 2.2.x you must"
    echo "upgrade it to get SSE support!"
#    die "old kernel for this cpu" # works fine on some 2.2.x so don't die (later check will test)
  else
    echores "$kernel_version, ok"
  fi
fi

# checking for a working awk, I'm using mawk first, because it's fastest - atmos
_awk=
if test "$_vidix" = yes ; then
_awk_verc_fail=yes
echocheck "awk"
for _awk in mawk gawk nawk awk; do
  if ( $_awk 'BEGIN{testme();}function testme(){print"";}' ) >> "$TMPLOG" 2>&1; then
    _awk_verc_fail=no
    break
  fi
done
test "$_awk_verc_fail" = yes && _awk=no
echores "$_awk"
if test "$_awk_verc_fail" = yes; then
echo "VIDIX needs Awk, but there was no working implementation found!"
echo "Try the GNU implementation, which can be downloaded from:"
echo "ftp://ftp.gnu.org/gnu/gawk/"
echo "If you don't need vidix, you can use configure --disable-vidix instead."
exit
fi
fi


######################
# MAIN TESTS GO HERE #
######################


echocheck "extra headers"
if test "$_extraincdir" ; then
  echores "$_extraincdir"
else
  echores "none"
fi


echocheck "extra libs"
if test "$_extralibdir" ; then
  echores "$_extralibdir"
else
  echores "none"
fi


echocheck "kstat"
cat > $TMPC << EOF
#include <kstat.h>
int main(void) { (void) kstat_open(); (void) kstat_close(0); return 0; }
EOF
_kstat=no
cc_check -lkstat && _kstat=yes
if test "$_kstat" = yes ; then
  _ld_arch="-lkstat $_ld_arch"
fi
if test "$_kstat" = yes ; then
  _def_kstat="#define HAVE_LIBKSTAT 1"
else
  _def_kstat="#undef HAVE_LIBKSTAT"
fi
echores "$_kstat"


echocheck "posix4"
# required for nanosleep on some systems
cat > $TMPC << EOF
#include <time.h>
int main(void) { (void) nanosleep(0, 0); return 0; }
EOF
_posix4=no
cc_check -lposix4 && _posix4=yes
if test "$_posix4" = yes ; then
  _ld_arch="-lposix4 $_ld_arch"
fi
echores "$_posix4"


echocheck "nanosleep"
# also check for nanosleep
cat > $TMPC << EOF
#include <time.h>
int main(void) { (void) nanosleep(0, 0); return 0; }
EOF
_nanosleep=no
cc_check $_ld_arch && _nanosleep=yes
if test "$_nanosleep" = yes ; then
  _def_nanosleep='#define HAVE_NANOSLEEP 1'
else
  _def_nanosleep='#undef HAVE_NANOSLEEP'
fi
echores "$_nanosleep"


echocheck "socklib"
# for Solaris (socket stuff is in -lsocket, gethostbyname and friends in -lnsl):
cat > $TMPC << EOF
#include <netdb.h>
int main(void) { (void) gethostbyname(0); return 0; }
EOF
cc_check -lsocket && _ld_sock="-lsocket"
cc_check -lnsl && _ld_sock="-lnsl"
cc_check -lsocket -lnsl && _ld_sock="-lsocket -lnsl"
if test "$_ld_sock" ; then
  echores "yes (using $_ld_sock)"
else
  echores "no"
fi


echocheck "inet_pton()"
cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main(void) { (void) inet_pton(0, 0, 0); return 0; }
EOF
if cc_check $_ld_sock ; then
  # NOTE: Linux has libresolv but does not need it
  :
  echores "yes (using $_ld_sock)"
elif cc_check $_ld_sock -lresolv ; then
  # NOTE: needed for SunOS at least
  _ld_sock="$_ld_sock -lresolv"
  echores "yes (using $_ld_sock)"
else
  echores "no (=> streaming support disabled)"
  _streaming=no
fi

echocheck "inttypes.h (required)"
cat > $TMPC << EOF
#include <inttypes.h>
int main(void) { return 0; }
EOF
_inttypes=no
cc_check && _inttypes=yes
if test "$_inttypes" = yes ; then
  # nothing to do
  :
else
  die "cannot find header inttypes.h (see in DOC/faq.html)"
fi
echores "$_inttypes"


echocheck "malloc.h"
cat > $TMPC << EOF
#include <malloc.h>
int main(void) { (void) malloc(0); return 0; }
EOF
_malloc=no
cc_check && _malloc=yes
if test "$_malloc" = yes ; then
  _def_malloc='#define HAVE_MALLOC_H 1'
else
  _def_malloc='#undef HAVE_MALLOC_H'
fi
# malloc.h emits a warning in FreeBSD
freebsd && _def_malloc='#undef HAVE_MALLOC_H'
echores "$_malloc"


echocheck "memalign()"
# XXX restrict to x86 ? extend to other CPUs/cacheline sizes ?
cat > $TMPC << EOF
#include <malloc.h>
int main (void) { (void) memalign(64, sizeof(char)); return 0; }
EOF
_memalign=no
cc_check && _memalign=yes
if test "$_memalign" = yes ; then
 _def_memalign='#define HAVE_MEMALIGN 1'
else
 _def_memalign='#undef HAVE_MEMALIGN'
fi
echores "$_memalign"


echocheck "alloca.h"
cat > $TMPC << EOF
#include <alloca.h>
int main(void) { (void) alloca(0); return 0; }
EOF
_alloca=no
cc_check && _alloca=yes
if cc_check ; then
  _def_alloca='#define HAVE_ALLOCA_H 1'
else
  _def_alloca='#undef HAVE_ALLOCA_H'
fi
echores "$_alloca"


echocheck "mman.h"
cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/mman.h>
int main(void) { (void) mmap(0, 0, 0, 0, 0, 0); return 0; }
EOF
_mman=no
cc_check && _mman=yes
if test "$_mman" = yes ; then
  _def_mman='#define HAVE_SYS_MMAN_H 1'
else
  _def_mman='#undef HAVE_SYS_MMAN_H'
fi
echores "$_mman"


echocheck "dynamic loader"
cat > $TMPC << EOF
#include <dlfcn.h>
int main(void) { dlopen(0, 0); dlclose(0); dlsym(0, 0); return 0; }
EOF
_dl=no
if cc_check ; then
  _dl=yes
elif cc_check -ldl ; then
  _dl=yes
  _ld_dl='-ldl'
fi
if test "$_dl" = yes ; then
 _def_dl='#define HAVE_LIBDL 1'
else
 _def_dl='#undef HAVE_LIBDL'
fi
echores "$_dl"


#echocheck "dynamic linking"
# FIXME !! make this dynamic detection to work and modify at the end (search _ld_dl_dynamic)
# also gcc flags are different, but ld flags aren't (-Bdynamic/-Bstatic/-Bsymbolic)
#cat > $TMPC << EOF
#int main(void) { return 0; }
#EOF
#if cc_check -rdynamic ; then
#  _ld_dl_dynamic='-rdynamic'
#elif cc_check -Bdynamic ; then
#  _ld_dl_dynamic='-Bdynamic'
#elif cc_check ; then
#  _ld_dl_dynamic=''
#fi
#echores "using $_ld_dl_dynamic"


echocheck "pthread"
cat > $TMPC << EOF
#include <pthread.h>
void* func(void *arg) { return arg; }
int main(void) { pthread_t tid; return pthread_create (&tid, 0, func, 0) == 0 ? 0 : 1; }
EOF
if ( cc_check && $TMPO ) ; then              # QNX
  _ld_pthread=''
elif ( cc_check -lpthread && $TMPO ) ; then
  _ld_pthread='-lpthread'
elif ( cc_check -pthread && $TMPO ) ; then
  _ld_pthread='-pthread'
else
  if test "$_ld_static" ; then
    # for crosscompilation, we cannot execute the program, be happy if we can link statically
    if ( cc_check -lpthread ) ; then
      _ld_pthread='-lpthread'
    elif ( cc_check -pthread ) ; then
     _ld_pthread='-pthread'
    else
      die "Static lib pthread not found. (needed by windows and networking stuff)"
    fi
  else
    die "Lib pthread not found. (needed by windows and networking stuff)"
  fi
fi
echores "yes (using $_ld_pthread)"


echocheck "sys/soundcard.h"
cat > $TMPC << EOF
#include <sys/soundcard.h>
int main(void) { return 0; }
EOF
_sys_soundcard=no
cc_check && _sys_soundcard=yes
if test "$_sys_soundcard" = yes ; then
  _def_sys_soundcard='#define HAVE_SYS_SOUNDCARD_H 1'
else
  _def_sys_soundcard='#undef HAVE_SYS_SOUNDCARD_H'
fi
echores "$_sys_soundcard"


echocheck "termcap"
if test "$_termcap" = auto ; then
  cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
  _termcap=no
  cc_check -ltermcap && _termcap=yes
fi
if test "$_termcap" = yes ; then
  _def_termcap='#define USE_TERMCAP 1'
  _ld_termcap='-ltermcap'
else
  _def_termcap='#undef USE_TERMCAP'
fi
echores "$_termcap"


echocheck "termios"
if test "$_termios" = auto ; then
  cat > $TMPC <<EOF
#include <sys/termios.h>
int main(void) { return 0; }
EOF
  _termios=no
  cc_check && _termios=yes
  _def_termios_h_name='sys/termios.h'
fi
# second test:
if test "$_termios" = no ; then
  cat > $TMPC <<EOF
#include <termios.h>
int main(void) { return 0; }
EOF
  _termios=no
  cc_check && _termios=yes
  _def_termios_h_name='termios.h'
fi

if test "$_termios" = yes ; then
  _def_termios='#define HAVE_TERMIOS 1'
  _def_termios_h='#undef HAVE_TERMIOS_H'
  _def_termios_sys_h='#undef HAVE_SYS_TERMIOS_H'

  if test "$_def_termios_h_name" = 'sys/termios.h' ; then
    _def_termios_sys_h='#define HAVE_SYS_TERMIOS_H 1'
  elif test "$_def_termios_h_name" = 'termios.h' ; then
    _def_termios_h='#define HAVE_TERMIOS_H 1'
  fi
  echores "yes (using $_def_termios_h_name)"
else
  _def_termios='#undef HAVE_TERMIOS'
  _def_termios_h_name=''
  echores "no"
fi


echocheck "shm"
if test "$_shm" = auto ; then
  cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/shm.h>
int main(void) { shmget(0, 0, 0); shmat(0, 0, 0); shmctl(0, 0, 0); return 0; }
EOF
  _shm=no
  cc_check && _shm=yes
fi
if test "$_shm" = yes ; then
  _def_shm='#define HAVE_SHM 1'
else
  _def_shm='#undef HAVE_SHM'
fi
echores "$_shm"

# XXX: FIXME, add runtime checking
echocheck "linux devfs"
echores "$_linux_devfs"

echocheck "3dfx"
if test "$_3dfx" = yes ; then
  _def_3dfx='#define HAVE_3DFX 1'
  _vosrc="$_vosrc vo_3dfx.c"
  _vomodules="3dfx $_vomodules"
else
  _def_3dfx='#undef HAVE_3DFX'
fi
echores "$_3dfx"


echocheck "tdfxfb"
if test "$_tdfxfb" = yes ; then
  _def_tdfxfb='#define HAVE_TDFXFB 1'
  _vosrc="$_vosrc vo_tdfxfb.c"
  _vomodules="tdfxfb $_vomodules"
else
  _def_tdfxfb='#undef HAVE_TDFXFB'
fi
echores "$_tdfxfb"


echocheck "DirectFB"
if test "$_directfb" = auto ; then
  _directfb=no
  cat > $TMPC <<EOF
#include <directfb.h>
int main(void) { IDirectFB *foo; return 0; }
EOF
  linux && test -c /dev/fb0 && cc_check -ldirectfb && _directfb=yes
fi
if test "$_directfb" = yes ; then
  _def_directfb='#define HAVE_DIRECTFB 1'
  _vosrc="$_vosrc vo_directfb.c"
  _vomodules="directfb $_vomodules"
  _ld_directfb='-ldirectfb'
else
  _def_directfb='#undef HAVE_DIRECTFB'
fi
echores "$_directfb"

echocheck "DirectFB >= 0.9.9"
if test "$_directfb" = auto; then
    _directfb=no
    cat > $TMPC <<EOF
#include <directfb.h>
nt main(void) { IDirectFBEventBuffer *foo; return 0; }
EOF
  linux && test -c /dev/fb0 && cc_check -ldirectfb && _directfb=yes
fi
if test "$_directfb" = yes ; then
  _def_directfb='#define HAVE_DIRECTFB099 1'
else
  _def_directfb='#undef HAVE_DIRECTFB'
fi
echores "$_directfb"



# Checking for localization ...
echocheck "language"
test -z "$LINGUAS" && LINGUAS="en"
if test -f "help_mp-${LINGUAS}.h" ; then
  echores "using ${LINGUAS}"
else
  echores "${LINGUAS} not found, using en"
  LINGUAS="en"
fi
_mp_help="help_mp-${LINGUAS}.h"
test -f help_mp-${LINGUAS}.h || die "help_mp-${LINGUAS}.h not found"


echocheck "vsscanf()"
cat > $TMPC << EOF
#include <stdarg.h>
int main(void) { vsscanf(); return 0; }
EOF
_vsscanf=no
cc_check && _vsscanf=yes
if test "$_vsscanf" = yes ; then
  _def_vsscanf='#define HAVE_VSSCANF 1'
else
  _def_vsscanf='#undef HAVE_VSSCANF'
fi
echores "$_vsscanf"


echocheck "X11 headers"
if test -z "$_inc_x11" ; then
  for I in /usr/include /usr/X11R6/include /usr/X11/include /usr/openwin/include ; do
    if test -d "$I/X11" ; then
      _inc_x11="-I$I"
      echores "yes (using $I)"
      break
    fi
  done
  if test -z "$_inc_x11" ; then
    _x11=no
    echores "not found"
  fi
else
  echores "yes (using $_inc_x11)"
fi
if test "$_inc_x11" = "-I/usr/include" ; then
  _inc_x11=""
fi


echocheck "X11 libs"
if test -z "$_ld_x11" ; then
  for I in /usr/X11R6/lib /usr/X11/lib /usr/lib32 /usr/openwin/lib ; do
    if test -d "$I" ; then
      _ld_x11="-L$I"
      echores "yes (using $I)"
      break;
    fi
  done
  if test -z "$_ld_x11" ; then
    _x11=no
    echores "not found"
  fi
else
  echores "yes (using $_ld_x11)"
fi
_ld_x11="$_ld_x11 -lX11 -lXext $_ld_sock"


#########
# VIDEO #
#########

echocheck "X11"
if test "$_x11" = auto || test "$_x11" = yes ; then
  cat > $TMPC <<EOF
#include <X11/Xlib.h>
#include <X11/Xutil.h>
int main(void) { (void) XCreateWindow(0,0,0,0,0,0,0,0,0,0,0,0); return 0; }
EOF
  _x11=no
  cc_check $_inc_x11 $_ld_x11 && _x11=yes
fi
if test "$_x11" = yes ; then
  _def_x11='#define HAVE_X11 1'
  _vosrc="$_vosrc vo_x11.c"
  _vomodules="x11 $_vomodules"
else
  _def_x11='#undef HAVE_X11'
  _inc_x11=''
  _ld_x11=''
fi
echores "$_x11"


echocheck "DPMS"
_xdpms3=no
if test "$_x11" = yes ; then
  cat > $TMPC <<EOF
#include <X11/Xmd.h>
#include <X11/Xlib.h>
#include <X11/Xutil.h>
#include <X11/Xatom.h>
#include <X11/extensions/dpms.h>
int main(void) {
  (void) DPMSQueryExtension(0, 0, 0);
}
EOF
  cc_check $_inc_x11 $_ld_x11 -lXdpms && _xdpms3=yes
fi
_xdpms4=no
if test "$_x11" = yes ; then
  cat > $TMPC <<EOF
#include <X11/Xlib.h>
#include <X11/extensions/dpms.h>
int main(void) {
  (void) DPMSQueryExtension(0, 0, 0);
}
EOF
  cc_check $_inc_x11 $_ld_x11 && _xdpms4=yes
fi
if test "$_xdpms4" = yes ; then
  _def_xdpms='#define HAVE_XDPMS 1'
  echores "yes (using Xdpms 4)"
elif test "$_xdpms3" = yes ; then
  _def_xdpms='#define HAVE_XDPMS 1'
  _ld_x11="$_ld_x11 -lXdpms"
  echores "yes (using Xdpms 3)"
else
  _def_xdpms='#undef HAVE_XDPMS'
  echores "no"
fi


echocheck "Xv"
if test "$_x11" = yes && test "$_xv" != no ; then
  cat > $TMPC <<EOF
#include <X11/Xlib.h>
#include <X11/extensions/Xvlib.h>
int main(void) { (void) XvGetPortAttribute(0, 0, 0, 0); return 0; }
EOF
  _xv=no
  cc_check $_inc_x11 $_ld_x11 -lXv && _xv=yes
else
  _xv=no
fi
if test "$_xv" = yes ; then
  _def_xv='#define HAVE_XV 1'
  _ld_xv='-lXv'
  _vosrc="$_vosrc vo_xv.c"
  _vomodules="xv $_vomodules"
else
  _def_xv='#undef HAVE_XV'
fi
echores "$_xv"


echocheck "Xinerama"
if test "$_x11" = yes && test "$_xinerama" != no ; then
  cat > $TMPC <<EOF
#include <X11/Xlib.h>
#include <X11/extensions/Xinerama.h>
int main(void) { (void) XineramaIsActive(0); return 0; }
EOF
  _xinerama=no
  cc_check $_inc_x11 $_ld_x11 -lXinerama && _xinerama=yes
else
  _xinerama=no
fi
if test "$_xinerama" = yes ; then
  _def_xinerama='#define HAVE_XINERAMA 1'
  _ld_xinerama='-lXinerama'
else
  _def_xinerama='#undef HAVE_XINERAMA'
fi
echores "$_xinerama"


# Note: the -lXxf86vm library is the VideoMode extension and though it's not
# needed for DGA, AFAIK every distribution packages together with DGA stuffs
# named 'X extensions' or something similar.
# This check may be useful for future mplayer versions (to change resolution)
# If you run into problems, remove '-lXxf86vm'.
echocheck "Xxf86vm"
if test "$_x11" = yes && test "$_vm" != no ; then
  cat > $TMPC <<EOF
#include <X11/Xlib.h>
#include <X11/extensions/xf86vmode.h>
int main(void) { (void) XF86VidModeQueryExtension(0, 0, 0); return 0; }
EOF
  _vm=no
  cc_check $_inc_x11 $_ld_x11 -lXxf86vm && _vm=yes
else
  _vm=no
fi
if test "$_vm" = yes ; then
  _def_vm='#define HAVE_XF86VM 1'
  _ld_vm='-lXxf86vm'
else
  _def_vm='#undef HAVE_XF86VM'
fi
echores "$_vm"


echocheck "DGA"
# Version 2 is preferred to version 1 if available
if test "$_dga" = auto ; then
  cat > $TMPC << EOF
#include <X11/Xlib.h>
#include <X11/extensions/xf86dga.h>
int main (void) { (void) XF86DGASetViewPort(0, 0, 0, 0); return 0; }
EOF
  _dga=no
  cc_check $_inc_x11 $_ld_x11 -lXxf86dga -lXxf86vm && _dga=1

  cat > $TMPC << EOF
#include <X11/Xlib.h>
#include <X11/extensions/xf86dga.h>
int main (void) { (void) XDGASetViewport(0, 0, 0, 0, 0); return 0; }
EOF
  cc_check $_inc_x11 $_ld_x11 -lXxf86dga && _dga=2
fi

_def_dga='#undef HAVE_DGA'
_def_dga2='#undef HAVE_DGA2'
if test "$_dga" = 1 ; then
  _def_dga='#define HAVE_DGA 1'
  _ld_dga='-lXxf86dga'
  _vosrc="$_vosrc vo_dga.c"
  _vomodules="dga $_vomodules"
  echores "yes (using DGA 1.0)"
elif test "$_dga" = 2 ; then
  _def_dga='#define HAVE_DGA 1'
  _def_dga2='#define HAVE_DGA2 1'
  _ld_dga='-lXxf86dga'
  _vosrc="$_vosrc vo_dga.c"
  _vomodules="dga $_vomodules"
  echores "yes (using DGA 2.0)"
elif test "$_dga" = no ; then
  echores "no"
else
  die "DGA version must be 1 or 2"
fi


echocheck "OpenGL"
#Note: this test is run even with --enable-gl since we autodetect $_ld_gl
if test "$_x11" = yes && test "$_gl" != no ; then
  cat > $TMPC << EOF
#include <GL/gl.h>
int main(void) { return 0; }
EOF
  _gl=no
  if cc_check $_inc_x11 $_ld_x11 -lGL -lm ; then
    _gl=yes
    _ld_gl="-lGL"
  elif cc_check $_inc_x11 $_ld_x11 -lGL -lm $_ld_pthread ; then
    _gl=yes
    _ld_gl="-lGL $_ld_pthread"
  fi
else
  _gl=no
fi
if test "$_gl" = yes ; then
  _def_gl='#define HAVE_GL 1'
  _vosrc="$_vosrc vo_gl.c vo_gl2.c"
  _vomodules="opengl $_vomodules"
else
  _def_gl='#undef HAVE_GL'
fi
echores "$_gl"


echocheck "/dev/mga_vid"
if test "$_mga" = auto ; then
  _mga=no
  test -c /dev/mga_vid && _mga=yes
fi
if test "$_mga" = yes ; then
  _def_mga='#define HAVE_MGA 1'
  _vosrc="$_vosrc vo_mga.c"
  _vomodules="mga $_vomodules"
else
  _def_mga='#undef HAVE_MGA'
fi
echores "$_mga"


echocheck "syncfb"
_syncfb=no
test "$_mga" = yes && _syncfb=yes
if test "$_syncfb" = yes ; then
  _def_syncfb='#define HAVE_SYNCFB 1'
  _vosrc="$_vosrc vo_syncfb.c"
else
  _def_syncfb='#undef HAVE_SYNCFB'
fi
echores "$_syncfb"


echocheck "xmga"
if test "$_xmga" = auto ; then
  _xmga=no
  test "$_x11" = yes && test "$_mga" = yes && _xmga=yes
fi
if test "$_xmga" = yes ; then
  _def_xmga='#define HAVE_XMGA 1'
  _vosrc="$_vosrc vo_xmga.c"
  _vomodules="xmga $_vomodules"
else
  _def_xmga='#undef HAVE_XMGA'
fi
echores "$_xmga"


echocheck "GGI"
if test "$_ggi" = auto ; then
  cat > $TMPC << EOF
#include <ggi/ggi.h>
int main(void) { return 0; }
EOF
  _ggi=no
  cc_check -lggi && _ggi=yes
fi
if test "$_ggi" = yes ; then
  _def_ggi='#define HAVE_GGI 1'
  _ld_ggi='-lggi'
  _vosrc="$_vosrc vo_ggi.c"
  _vomodules="ggi $_vomodules"
else
  _def_ggi='#undef HAVE_GGI'
fi
echores "$_ggi"


echocheck "AA"
if test "$_aa" = auto ; then
  cat > $TMPC << EOF
#include <aalib.h>
int main(void) { (void) aa_init(0, 0, 0); return 0; }
EOF
  _aa=no
  cc_check  -laa && _aa=yes
fi
if test "$_aa" = yes ; then
  _def_aa='#define HAVE_AA 1'
  _ld_aa='-laa'
  _vosrc="$_vosrc vo_aa.c"
  _vomodules="aa $_vomodules"
else
  _def_aa='#undef HAVE_AA'
fi
echores "$_aa"


echocheck "SVGAlib"
if test "$_svga" = auto ; then
  cat > $TMPC << EOF
#include <vga.h>
#include <vgagl.h>
int main(void) { return 0; }
EOF
  _svga=no
  cc_check  -lvgagl -lvga && _svga=yes
fi
if test "$_svga" = yes ; then
  _def_svga='#define HAVE_SVGALIB 1'
  _ld_svga='-lvgagl -lvga'
  _vosrc="$_vosrc vo_svga.c"
  _vomodules="svga $_vomodules"
else
  _def_svga='#undef HAVE_SVGALIB'
fi
echores "$_svga"


echocheck "FBDev"
if test "$_fbdev" = auto ; then
  _fbdev=no
  linux && test -c /dev/fb0 && _fbdev=yes
fi
if test "$_fbdev" = yes ; then
  _def_fbdev='#define HAVE_FBDEV 1'
  _vosrc="$_vosrc vo_fbdev.c"
  _vomodules="fbdev $_vomodules"

  if test "$_fbdev_nocopy" = yes ; then
    _def_fbdev_nocopy='#define USE_CONVERT2FB 1'
  fi
else
  _def_fbdev='#undef HAVE_FBDEV'
  _def_fbdev_nocopy='#undef USE_CONVERT2FB'
fi
echores "$_fbdev"



echocheck "DVB"
if test "$_dvb" != no ; then
  _dvb=no
  test -c /dev/ost/video && _dvb=yes
fi
if test "$_dvb" = yes ; then
  _def_dvb='#define HAVE_DVB 1'
  _vomodules="mpegpes(dvb) $_vomodules"
else
  _def_dvb='#undef HAVE_DVB'
  _vomodules="mpegpes(file) $_vomodules"  
fi
echores "$_dvb"


echocheck "PNG support"
if test "$_png" = auto ; then
  _png=no
  if irix ; then
    # Don't check for -lpng on irix since it has its own libpng
    # incompatible with the GNU libpng
    echores "disabled on irix (not GNU libpng)"
  else
cat > $TMPC << EOF
#include <png.h>
#include <string.h>
int main(void) {
  printf("png.h : %s\n", PNG_LIBPNG_VER_STRING);
  printf("libpng: %s\n", png_get_libpng_ver(NULL));
  return (strcmp(PNG_LIBPNG_VER_STRING, png_get_libpng_ver(NULL)));
}
EOF
    if cc_check -lpng -lz -lm ; then
      if "$TMPO" >> "$TMPLOG" ; then
        _png=yes
        echores yes
      else
        echores "no (mismatch of library and header versions)"
      fi
    else
      echores no
    fi
  fi
else
  echores "$_png"
fi
if test "$_png" = yes ; then
  _def_png='#define HAVE_PNG 1'
  _ld_png='-lpng -lz'
  _vosrc="$_vosrc vo_png.c"
  _vomodules="png $_vomodules"
  _mkf_png="yes"
else
  _def_png='#undef HAVE_PNG'
  _mkf_png="no"
fi

echocheck "JPEG support"
if test "$_jpg" = auto ; then
  _jpg=no
cat > $TMPC << EOF
#include <stdio.h>
#include <stdlib.h>
#include <setjmp.h>
#include <string.h>
#include <jpeglib.h>
int main(void) {
  return 0;
}
EOF
    if cc_check -ljpeg -lm ; then
      if "$TMPO" >> "$TMPLOG" ; then
        _jpg=yes
        echores yes
      fi
    else
      echores no
    fi
else
  echores "$_jpg"
fi
if test "$_jpg" = yes ; then
  _def_jpg='#define HAVE_JPEG 1'
  _ld_jpg='-ljpeg'
  _mkf_jpg="yes"
else
  _def_jpg='#undef HAVE_JPEG'
  _mkf_jpg="no"
fi


if test "$_vesa" != no ; then
echocheck "VESA support"
if x86 && linux ; then
  _def_vesa='#define HAVE_VESA 1'
  _vosrc="$_vosrc vo_vesa.c vesa_lvo.c"
  _vomodules="vesa $_vomodules"
  echores "yes"
else
  _def_vesa='#undef HAVE_VESA'
  echores "no (not supported on this OS/architecture)"
fi
else
_def_vesa='#undef HAVE_VESA'
fi


#################
# VIDEO + AUDIO #
#################


echocheck "SDL"
if test -z "$_sdlconfig" ; then
  if ( sdl-config --version ) >/dev/null 2>&1 ; then
    _sdlconfig="sdl-config"
  elif ( sdl11-config --version ) >/dev/null 2>&1 ; then
    _sdlconfig="sdl11-config"
  else
    _sdlconfig=false
  fi
fi
if test "$_sdl" = auto || test "$_sdl" = yes ; then
  cat > $TMPC << EOF
#include <SDL.h>
int main(void) { return 0; }
EOF
  _sdl=no
  if "$_sdlconfig" --version >/dev/null 2>&1 ; then
    if cc_check `$_sdlconfig --cflags` `$_sdlconfig --libs` ; then
      _sdlversion=`$_sdlconfig --version | sed 's/[^0-9]//g'`
        if test "$_sdlversion" -gt 116 ; then
          if test "$_sdlversion" -lt 121 ; then
            _def_sdlbuggy='#define BUGGY_SDL'
          else
            _def_sdlbuggy='#undef BUGGY_SDL'
          fi
          _sdl=yes
        else
          _sdl=outdated
        fi
     fi
  fi
fi
if test "$_sdl" = yes ; then
  _def_sdl='#define HAVE_SDL 1'
  _ld_sdl=`$_sdlconfig --libs`
  _inc_sdl=`$_sdlconfig --cflags`
  _vosrc="$_vosrc vo_sdl.c"
  _vomodules="sdl $_vomodules"
  _aosrc="$_aosrc ao_sdl.c"
  _aomodules="sdl $_aomodules"
  echores "yes (using $_sdlconfig)"
else
  _def_sdl='#undef HAVE_SDL'
  echores "no"
fi

echocheck "NAS"
if test "$_nas" = auto || test "$_nas" = yes ; then
  cat > $TMPC << EOF
#include <audio/audiolib.h>
int main(void) { return 0; }
EOF
  _nas=no
  cc_check -laudio $_inc_x11 $_ld_x11 -lXt -lm && _nas=yes
fi
if test "$_nas" = yes ; then
  _def_nas='#define HAVE_NAS 1'
  _ld_nas="-laudio  $_ld_x11 -lXt"
  _aosrc="$_aosrc ao_nas.c"
  _aomodules="nas $_aomodules"
else
  _def_nas='#undef HAVE_NAS'
fi
echores "$_nas"

echocheck "DXR3/H+"
if test "$_dxr3" = auto ; then
  cat > $TMPC << EOF
#include <linux/em8300.h>
int main(void) { return 0; }
EOF
  _dxr3=no
  cc_check && _dxr3=yes
fi
if test "$_dxr3" = yes ; then
  _def_dxr3='#define HAVE_DXR3 1'
  _vosrc="$_vosrc vo_dxr3.c"
  _vomodules="dxr3 $_vomodules"
else
  _def_dxr3='#undef HAVE_DXR3'
  if test "$_mp1e" = auto ; then
    # we don't need mp1e
    _mp1e=no
  fi
fi
echores "$_dxr3"

echocheck "libmp1e"
if test "$_mmx" = no ; then
  # mp1e REQUIRES mmx!
  _mp1e=no
fi
if test "$_mp1e" != no ; then
  _mp1e=yes
  _def_mp1e='#define USE_MP1E'
  _ld_mp1e="-Llibmp1e -lmp1e"
  _dep_mp1e='libmp1e/libmp1e.a'
else
  _mp1e=no
  _def_mp1e='#undef USE_MP1E'
  _ld_mp1e=""
  _dep_mp1e=''
fi
echores "$_mp1e"

#########
# AUDIO #
#########


echocheck "OSS Audio"
if test "$_ossaudio" = auto ; then
  cat > $TMPC << EOF
#include <sys/soundcard.h>
int main(void) { int arg = SNDCTL_DSP_SETFRAGMENT; return 0; }
EOF
  _ossaudio=no
  cc_check && _ossaudio=yes
fi
if test "$_ossaudio" = yes ; then
  _def_ossaudio='#define USE_OSS_AUDIO 1'
  _aosrc="$_aosrc ao_oss.c"
  _aomodules="oss $_aomodules"
  if test "$_linux_devfs" = yes; then
    _def_ossaudio_devdsp='#define PATH_DEV_DSP "/dev/sound/dspW"'
    _def_ossaudio_devmixer='#define PATH_DEV_MIXER "/dev/sound/mixer"'
  else
    _def_ossaudio_devdsp='#define PATH_DEV_DSP "/dev/dsp"'
    _def_ossaudio_devmixer='#define PATH_DEV_MIXER "/dev/mixer"'
  fi  
else
  _def_ossaudio='#undef USE_OSS_AUDIO'
  _def_ossaudio_devdsp='#define PATH_DEV_DSP ""'
  _def_ossaudio_devmixer='#define PATH_DEV_MIXER ""'
fi
echores "$_ossaudio"


echocheck "ALSA audio"
if test "$_alsa" = auto || test "$_alsa" = yes; then
  _alsa=no
  cat > $TMPC << EOF
#include <sys/asoundlib.h>
int main(void) { return (!(SND_LIB_MAJOR==0 && SND_LIB_MINOR==5)); }
EOF
  cc_check -lasound $_ld_dl $_ld_pthread && $TMPO && _alsaver='0.5.x'

  cat > $TMPC << EOF
#include <sys/asoundlib.h>
int main(void) { return (!(SND_LIB_MAJOR==0 && SND_LIB_MINOR==9)); }
EOF
  cc_check -lasound $_ld_dl $_ld_pthread && $TMPO && _alsaver='0.9.x'
  if test "$_alsaver" ; then
    _alsa=yes
    echores "yes (using alsa $_alsaver)"
  else
    echores "no"
  fi
else
  echores "no"
fi
_def_alsa5='#undef HAVE_ALSA5'
_def_alsa9='#undef HAVE_ALSA9'
if test "$_alsa" = yes ; then
  if test "$_alsaver" = '0.5.x' ; then
    _aosrc="$_aosrc ao_alsa5.c"
    _aomodules="alsa5 $_aomodules"
    _def_alsa5='#define HAVE_ALSA5 1'
  elif test "$_alsaver" = '0.9.x' ; then
    _aosrc="$_aosrc ao_alsa9.c"
    _aomodules="alsa9 $_aomodules"
    _def_alsa9='#define HAVE_ALSA9 1'
  fi
  _ld_alsa='-lasound'
fi


echocheck "Sun audio"
if test "$_sunaudio" = auto ; then
  cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/audioio.h>
int main(void) { audio_info_t info; AUDIO_INITINFO(&info); return 0; }
EOF
  _sunaudio=no
  cc_check && _sunaudio=yes
fi
if test "$_sunaudio" = yes ; then
  _def_sunaudio='#define USE_SUN_AUDIO 1'
  _aosrc="$_aosrc ao_sun.c"
  _aomodules="sun $_aomodules"
else
  _def_sunaudio='#undef USE_SUN_AUDIO'
fi
echores "$_sunaudio"


echocheck "Sun mediaLib"
if test "$_mlib" = auto ; then
  _mlib=no
  test -z "$_mlibdir" && _mlibdir=/opt/SUNWmlib
  cat > $TMPC << EOF
#include <mlib.h>
int main(void) { mlib_VideoColorYUV2ABGR420(0,0,0,0,0,0,0,0,0); return 0; }
EOF
  cc_check  -I${_mlibdir}/include -L${_mlibdir}/lib -lmlib && _mlib=yes
fi
if test "$_mlib" = yes ; then
  _def_mlib='#define HAVE_MLIB 1'
  _inc_mlib=" -I${_mlibdir}/include "
  _ld_mlib=" -L${_mlibdir}/lib -R${_mlibdir}/lib -lmlib "
else
  _def_mlib='#undef HAVE_MLIB'
fi
echores "$_mlib"


echocheck "SGI Audio"
if test "$_sgiaudio" = auto ; then
  # check for SGI audio
  cat > $TMPC << EOF
#include <dmedia/audio.h>
int main(void) { return 0; }
EOF
  _sgiaudio=no
  cc_check && _sgiaudio=yes
fi
if test "$_sgiaudio" = "yes" ; then
  _def_sgiaudio='#define USE_SGI_AUDIO 1'
  _ld_sgiaudio='-laudio'
  _aosrc="$_aosrc ao_sgi.c"
  _aomodules="sgi $_aomodules"
else
  _def_sgiaudio='#undef USE_SGI_AUDIO'
fi
echores "$_sgiaudio"


echocheck "VCD support"
if linux || bsdos || freebsd || sunos ; then
  _inputmodules="vcd $_inputmodules"
  _def_vcd='#define HAVE_VCD 1'
  echores "ok"
else
  _def_vcd='#undef HAVE_VCD'
  echores "not supported on this OS"
fi




echocheck "DVD support (libcss - old style)"
if test "$_css" = auto ; then
  cat > $TMPC <<EOF
#include <sys/types.h>
#include <css.h>
int main(void) { (void) CSSisEncrypted(0); return 0; }
EOF
  _css=no
  cc_check -lcss $_ld_dl && _css=yes
fi
if test "$_css" = yes ; then
  _def_css='#define HAVE_LIBCSS 1'
  test "$_csslibdir" && _ld_css="-L${_csslibdir} $_ld_css"
  _inputmodules="dvdcss $_inputmodules"
  _largefiles=yes
  echores "yes"
else
  _def_css='#undef HAVE_LIBCSS'
  echores "no"
fi


echocheck "DVD support (libdvdread - new style)"
if test "$_dvdread" = auto ; then
  cat > $TMPC << EOF
#include <dvdread/dvd_reader.h>
#include <dvdread/ifo_types.h>
#include <dvdread/ifo_read.h>
#include <dvdread/nav_read.h>
int main(void) { return 0; }
EOF
  _dvdread=no
  if test "$_dl" = yes; then
   cc_check  \
     -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -ldvdread $_ld_dl && \
     _dvdread=yes
  fi
fi
if test "$_dvdread" = yes ; then
  _largefiles=yes
  _def_dvdread='#define USE_DVDREAD 1'
  _ld_css='-ldvdread'
  _inputmodules="dvdread $_inputmodules"
  echores "yes"
else
  _def_dvdread='#undef USE_DVDREAD'
  echores "no"
fi

echocheck "zlib"
cat > $TMPC << EOF
#include <zlib.h>
int main(void) { (void) inflate(0, Z_NO_FLUSH); return 0; }
EOF
_zlib=no
cc_check -lz && _zlib=yes
if test "$_zlib" = yes ; then
  _def_zlib='#define HAVE_ZLIB 1'
  _ld_zlib='-lz'
else
  _def_zlib='#undef HAVE_ZLIB'
fi
echores "$_zlib"


echocheck "RTC"
if linux ; then
  if test "$_rtc" = auto ; then
    cat > $TMPC << EOF
#include <sys/ioctl.h>
#include <linux/rtc.h>
int main(void) { return RTC_IRQP_READ; }
EOF
    _rtc=no
    cc_check && _rtc=yes
  fi
  echores "$_rtc"
else
  _rtc=no
  echores "no (Linux specific feature)"
fi
if test "$_rtc" = yes ; then
  _def_rtc='#define HAVE_RTC 1'
else
  _def_rtc='#undef HAVE_RTC'
fi


echocheck "mad support"
if test "$_mad" = auto ; then
  _mad=no
  cat > $TMPC << EOF
#include <mad.h>
int main(void) { return 0; }
EOF
  cc_check $_madlibdir -lmad && _mad=yes
fi
if test "$_mad" = yes ; then
  _def_mad='#define USE_LIBMAD 1'
  _ld_mad='-lmad'
else
  _def_mad='#undef USE_LIBMAD'
fi
echores "$_mad"


echocheck "OggVorbis support"
if test "$_vorbis" = auto ; then
  _vorbis=no
  cat > $TMPC << EOF
#include <vorbis/codec.h>
int main(void) { return 0; }
EOF
  cc_check -lvorbis -logg -lm && _vorbis=yes
fi
if test "$_vorbis" = yes ; then
  _def_vorbis='#define HAVE_OGGVORBIS 1'
  _ld_vorbis='-lvorbis -logg'
else
  _def_vorbis='#undef HAVE_OGGVORBIS'
fi
echores "$_vorbis"


echocheck "Win32 DLL support"
qnx && _win32=no
if test "$_win32" = auto ; then
  _win32=no
  if x86 ; then
    if test -z "$_win32libdir" ; then
      for I in /usr/local/lib/win32 /usr/lib/win32 ; do
        if test -d "$I" ; then
          _win32libdir="$I"
          break;
        fi;
      done
    fi
    test "$_win32libdir" && _win32=yes
  fi
fi
if test "$_win32" = yes ; then
  _def_win32='#define USE_WIN32DLL 1'
  _ld_win32='-Lloader -lloader'
  _dep_win32='loader/libloader.a'
  _codecmodules="win32 $_codecmodules"
  echores "yes (using $_win32libdir)"
else
  _def_win32='#undef USE_WIN32DLL'
  _dshow=no
  echores "no"
fi


echocheck "DirectShow"
if false ; then

if test "$_dshow" != no ; then
  _dshow=no
  # check if compiler supports C++ and C++-libs are installed correctly
  cat > "$TMPCPP" << EOF
#include <string>
class myclass {
  private: int ret;
  public: int myreturn(void);
};
int myclass::myreturn(void) { ret = 0; return ret ; }
int main(void) { myclass myobject; return myobject.myreturn(); }
EOF
  echo "------------------------------------------------"  >> "$TMPLOG"
  cat "$TMPCPP" >> "$TMPLOG"
  if ( "$_cc" "$TMPCPP" -o "$TMPO" && "$TMPO" ) >> "$TMPLOG" 2>&1 ; then
    _dshow=yes
    echores "yes (C++ is ok)"
  else
    echores "no"
    cat << EOF

Your C++ runtime environment is broken.

Hints: Does $_cc support C++ ? Have you a C++ compiler installed ?
       Are the C++ libraries correctly installed ?
       Check for libstdc++ and in (/etc/)ld.so.conf

If you do not need DirectShow support, you can also use:
  ./configure --disable-dshow <your-normal-configure-options>
to disable building of the C++ based DirectShow code.

EOF
    die "$_cc's C++ is broken"
  fi
fi

fi

echores "$_dshow"

if test "$_dshow" = yes ; then
  _def_dshow='#define USE_DIRECTSHOW 1'
  _ld_dshow='-Lloader/dshow -lDS_Filter'
  _dep_dshow='loader/dshow/libDS_Filter.a'
  _codecmodules="directshow $_codecmodules"
else
  _def_dshow='#undef USE_DIRECTSHOW'
fi


echocheck "XAnim DLL"
if test "$_xanim" = auto ; then
  _xanim=no
  if test "$_dl" = yes ; then
    if test -z "$_xanimlibdir" ; then
	for I in /usr/local/lib/xanim/mods /usr/lib/xanim/mods /usr/lib/xanim ; do
          if test -d "$I" ; then
            _xanimlibdir="$I"
            break;
          fi;
        done
    fi
    test "$_xanimlibdir" && _xanim=yes
    if test "$_xanim" = yes ; then
      echores "yes (using $_xanimlibdir)"
    else
      echores "no (no suitable directory found - see DOCS/codecs.html)"
    fi
  else
    echores "no (dynamic loader support needed)"
  fi
else
  echores "$_xanim"
fi
if test "$_xanim" = yes ; then
  _def_xanim='#define USE_XANIM 1'
  _def_xanim_path="#define XACODEC_PATH \"$_xanimlibdir\""
  _codecmodules="xanim $_codecmodules"
else
  _def_xanim='#undef USE_XANIM'
  _def_xanim_path='#undef XACODEC_PATH'
fi


echocheck "iconv"
if test "$_iconv" = auto ; then
  if freebsd ; then
    _iconv_tmp='#include <giconv.h>'
  else
    _iconv_tmp='#include <iconv.h>'
  fi
  cat > $TMPC << EOF
#include <stdio.h>
#include <unistd.h>
$_iconv_tmp
#define INBUFSIZE 1024
#define OUTBUFSIZE 4096

char inbuffer[INBUFSIZE];
char outbuffer[OUTBUFSIZE];

int main(void) {
  ssize_t numread;
  iconv_t icdsc;
  char *tocode="UTF-8";
  char *fromcode="cp1250";
  if ((icdsc = iconv_open (tocode, fromcode)) != (iconv_t)(-1)) {
    while ((numread = read (0, inbuffer, INBUFSIZE))) {
      char *iptr=inbuffer;
      char *optr=outbuffer;
      size_t inleft=numread;
      size_t outleft=OUTBUFSIZE;
      if (iconv(icdsc, (const char **)&iptr, &inleft, &optr, &outleft)
          != (size_t)(-1)) {
        write (1, outbuffer, OUTBUFSIZE - outleft);
      }
    }
    if (iconv_close(icdsc) == -1)
      ;
  }
}
EOF
  _iconv=no
  if freebsd ; then
    cc_check  -lm -lgiconv && _iconv=yes
  elif bsdos ; then
    cc_check  -lm -liconv && _iconv=yes
  else
    cc_check -lm && _iconv=yes
  fi
fi
if test "$_iconv" = yes ; then
  _def_iconv='#define USE_ICONV 1'
  freebsd && _ld_iconv='-lgiconv'
  bsdos && _ld_iconv='-liconv'
else
  _def_iconv='#undef USE_ICONV'
fi
echores "$_iconv"


echocheck "FFmpeg libavcodec (static)"
if test "$_libavcodec" = auto ; then
  # Note: static linking is preferred to dynamic linking
  _libavcodec=no
  if test -d libavcodec && test -f libavcodec/utils.c ; then
    if grep avcodec_find_encoder_by_name libavcodec/utils.c > /dev/null 2>&1 ; then
      _libavcodec=yes
      echores "yes"
    else
      echores "no (old ffmpeg version, use CVS !)"
    fi
  else
    echores "no (see DOCS/codecs.html)"
  fi
else
  echores "$_libavcodec"
fi

if test "$_libavcodec" != yes ; then
echocheck "FFmpeg libavcodec (dynamic)"
if test "$_libavcodecso" = auto ; then
  _libavcodecso=no
# FIXME : check for avcodec_find_encoder_by_name() for mencoder
  cat > $TMPC << EOF
#define FF_POSTPROCESS 1 
#include <libffmpeg/avcodec.h>
int quant_store[MBR+1][MBC+1];
int main(void) { return 0; }
EOF
  if cc_check -lffmpeg -lm ; then
    _libavcodecso=yes
    echores "yes (using libffmpeg.so)"
  else
    echores "no (libffmpeg.so is broken/obsolete)"
  fi
else
  echores "$_libavcodecso"
fi
fi

_def_libavcodec='#undef USE_LIBAVCODEC'
_def_libavcodecso='#undef USE_LIBAVCODEC_SO'
_def_ffpostprocess='#undef FF_POSTPROCESS'
if test "$_libavcodec" = yes ; then
  _def_libavcodec='#define USE_LIBAVCODEC 1'
  _ld_libavcodec='-Llibavcodec -lavcodec'
  _dep_libavcodec='libavcodec/libavcodec.a'
  _def_ffpostprocess='#define FF_POSTPROCESS 1'
  _codecmodules="libavcodec $_codecmodules"
elif test "$_libavcodecso" = yes ; then
  _def_libavcodecso='#define USE_LIBAVCODEC_SO 1'
  _ld_libavcodec='-lffmpeg'
  _def_ffpostprocess='#define FF_POSTPROCESS 1'
  _codecmodules="libavcodec.so $_codecmodules"
fi


echocheck "zr"
if test "$_zr" = yes ; then
  if test "$_libavcodec" = yes ; then
    _def_zr='#define HAVE_ZR 1'
    _vosrc="$_vosrc vo_zr.c jpeg_enc.c"
    _vomodules="zr $_vomodules"
    echores "$_zr"
  else
    echores "libavcodec (static) is required by zr, sorry"
    _def_zr='#undef HAVE_ZR'
  fi
else
  _def_zr='#undef HAVE_ZR'
  echores "$_zr"
fi


echocheck "XviD/DivX4linux/DivX5linux/OpenDivX decore"
# DivX5: DEC_OPT_MEMORY_REQS - DivX4: DEC_OPT_FRAME_311
cat > $TMPC << EOF
#include <decore.h>
int main(void) { (void) decore(0, 0, 0, 0);  return DEC_OPT_FRAME_311; }
EOF
if test "$_xvidcore" && cc_check -lm "$_xvidcore" ; then
  _xvid=yes
  _divx4linux=no
  _opendivx=no
  _ld_decore="$_xvidcore"
  _def_decore='#define NEW_DECORE 1'
  _def_divx='#define USE_DIVX'
  _def_divx5='#undef DECORE_DIVX5'
  _def_odivx_postprocess='#undef HAVE_ODIVX_POSTPROCESS'
  _codecmodules="xvid $_codecmodules"
  echores "XviD (with $_xvidcore)"
elif test "$_xvid" != no && cc_check -lm -lxvidcore ; then
  _xvid=yes
  _divx4linux=no
  _opendivx=no
  _ld_decore='-lxvidcore'
  _def_decore='#define NEW_DECORE 1'
  _def_divx='#define USE_DIVX'
  _def_divx5='#undef DECORE_DIVX5'
  _def_odivx_postprocess='#undef HAVE_ODIVX_POSTPROCESS'
  _codecmodules="xvid $_codecmodules"
  echores "XviD (with libxvidcore.so)"
elif test "$_divx4linux" != no && cc_check -lm -ldivxdecore -lm ; then
  _xvid=no
  _divx4linux=yes
  _opendivx=no
  _ld_decore='-ldivxdecore opendivx/postprocess.o'
  _def_decore='#define NEW_DECORE 1'
  _def_divx='#define USE_DIVX'
  _def_divx5='#undef DECORE_DIVX5'
  _def_odivx_postprocess='#define HAVE_ODIVX_POSTPROCESS 1'
  _codecmodules="divx4linux $_codecmodules"
  echores "DivX4linux (with libdivxdecore.so)"
elif test "$_divx4linux" != no ; then 
# DivX5 check
# OdivxPP disabled because of:
# ld: Warning: type of symbol `dering' changed from 1 to 2 in opendivx/postprocess.o
cat > $TMPC << EOF
#include <decore.h>
int main(void) { (void) decore(0, 0, 0, 0);  return DEC_OPT_MEMORY_REQS; }
EOF
if cc_check -lm -ldivxdecore -lm ; then
  _xvid=no
  _divx4linux=yes
  _opendivx=no
#  _ld_decore='-ldivxdecore opendivx/postprocess.o'
  _ld_decore='-ldivxdecore'
  _def_decore='#define NEW_DECORE 1'
  _def_divx='#define USE_DIVX'
  _def_divx5='#define DECORE_DIVX5 1'
#  _def_odivx_postprocess='#define HAVE_ODIVX_POSTPROCESS 1'
  _def_odivx_postprocess='#undef HAVE_ODIVX_POSTPROCESS'
  _codecmodules="divx5linux $_codecmodules"
  echores "DivX5linux (with libdivxdecore.so)"
elif test "$_opendivx" != no ; then
  _xvid=no
  _divx4linux=no
  _opendivx=yes
  _ld_decore='-Lopendivx -ldecore'
  _def_decore='#undef NEW_DECORE'
  _def_divx='#define USE_DIVX'
  _def_divx5='#undef DECORE_DIVX5'
  _def_odivx_postprocess='#define HAVE_ODIVX_POSTPROCESS 1'
  _codecmodules="opendivx $_codecmodules"
  echores "OpenDivX"
else
  _xvid=no
  _divx4linux=no
  _opendivx=no
  _ld_decore=''
  _def_decore='#undef NEW_DECORE'
  _def_divx='#undef USE_DIVX'
  _def_divx5='#undef DECORE_DIVX5'
  _def_odivx_postprocess='#undef HAVE_ODIVX_POSTPROCESS'
  echores "no"
fi # DivX5 check
fi


# mencoder requires (optional) those libs: libmp3lame and divx4linux encore
if test "$_mencoder" != no ; then

  echocheck "libmp3lame (for mencoder)"
  _mp3lame=no
  cat > $TMPC <<EOF
#include <lame/lame.h>
int main(void) { (void) lame_init(); return 0; }
EOF
  # Note: libmp3lame usually depends on vorbis
  cc_check -lmp3lame $_ld_vorbis -lm && _mp3lame=yes
  if test "$_mp3lame" = yes ; then
    _def_mp3lame='#define HAVE_MP3LAME 1'
    _ld_mp3lame="-lmp3lame $_ld_vorbis"
  else
    _def_mp3lame='#undef HAVE_MP3LAME'
  fi
  echores "$_mp3lame"


  echocheck "XviD/DivX4linux encore (for mencoder)"
  cat > $TMPC << EOF
#include <encore2.h>
int main(void) { (void) encore(0, 0, 0, 0); return 0; }
EOF
  if test "$_xvid" != no && test "$_xvidcore" && cc_check -lm "$_xvidcore" ; then
    _def_encore='#define HAVE_DIVX4ENCORE 1'
    _ld_encore="-lm $_xvidcore"
    echores "XviD (with $_xvidcore)"
  elif test "$_xvid" != no && cc_check -lm -lxvidcore ; then
    _def_encore='#define HAVE_DIVX4ENCORE 1'
    _ld_encore='-lm -lxvidcore'
    echores "XviD (with libxvidcore.so)"
  elif test "$_divx4linux" != no && cc_check -lm -ldivxencore ; then
    _def_encore='#define HAVE_DIVX4ENCORE 1'
    _ld_encore='-lm -ldivxencore'
    echores "DivX4linux (with libdivxencore.so)"
  else
    _def_encore='#undef HAVE_DIVX4ENCORE'
    echores "no"
  fi
fi

echocheck "mencoder"
_mencoder_flag='#undef HAVE_MENCODER'
if test "$_mencoder" = yes ; then
  _mencoder_flag='#define HAVE_MENCODER'
fi
echores "$_mencoder"

echocheck "fastmemcpy"
# fastmemcpy check is done earlier with tests of CPU & binutils features
if test "$_fastmemcpy" = yes ; then
  _def_fastmemcpy='#define USE_FASTMEMCPY 1'
else
  _def_fastmemcpy='#undef USE_FASTMEMCPY'
fi
echores "$_fastmemcpy"


echocheck "TV interface"
if test "$_tv" = yes ; then
  _def_tv='#define USE_TV 1'
  _inputmodules="tv $_inputmodules"
else
  _def_tv='#undef USE_TV'
fi
echores "$_tv"

echocheck "Video 4 Linux TV interface"
if test "$_tv_v4l" = auto ; then
 _tv_v4l=no
 if test "$_tv" = yes && linux ; then
  if test -c /dev/video0 || test -c /dev/video ; then
    cat > $TMPC <<EOF
#include <stdlib.h>
#include <linux/videodev.h>
int main(void) { return 0; }
EOF
    cc_check && _tv_v4l=yes
  fi
 fi
fi
if test "$_tv_v4l" = yes ; then
  _def_tv_v4l='#define HAVE_TV_V4L 1'
  _inputmodules="tv-v4l $_inputmodules"
else
  _def_tv_v4l='#undef HAVE_TV_V4L'
fi
echores "$_tv_v4l"


echocheck "select"
if test "$_select" = no ; then
  _def_select='#undef HAVE_AUDIO_SELECT'
elif test  "$_select" = yes ; then
  _def_select='#define HAVE_AUDIO_SELECT 1'
fi
echores "$_select"


echocheck "streaming"
# FIXME streaming check
if test "$_streaming" != no ; then
  _def_streaming='#define STREAMING 1'
  _ld_streaming="$_ld_sock"
  _inputmodules="network $_inputmodules"
else
  _def_streaming='#undef STREAMING'
fi
echores "$_streaming"



# --------------- GUI specific tests begin -------------------
echocheck "GUI"
echo "$_gui"
if test "$_gui" = yes ; then

  # Required libraries
  test "$_png" != yes && die "PNG support required for GUI compilation"
  test "$_x11" != yes && die "X11 support required for GUI compilation"

  echocheck "XShape extension"
  _xshape=no
  if test "$_x11" = yes ; then
    cat > $TMPC << EOF
#include <X11/Xlib.h>
#include <X11/Xproto.h>
#include <X11/Xutil.h>
#include <X11/extensions/shape.h>
#include <stdlib.h>
int main(void) {
  char *name = ":0.0";
  Display *wsDisplay;
  int exitvar = 0;
  int eventbase, errorbase;
  if (getenv("DISPLAY"))
    name=getenv("DISPLAY");
  wsDisplay=XOpenDisplay(name);
  if (!XShapeQueryExtension(wsDisplay,&eventbase,&errorbase))
    exitvar=1;
  XCloseDisplay(wsDisplay);
  return exitvar;
}
EOF
    cc_check $_inc_x11 $_ld_x11 && _xshape=yes
  fi
  if test "$_xshape" = yes ; then
    _def_xshape='#define HAVE_XSHAPE 1'
  else
    die "the GUI requires the X11 extension XShape (which was not found)"
  fi
  echores "$_xshape"


  # Check for GTK:
  echocheck "gtk version"
  if test -z "$_gtkconfig" ; then
    if ( gtk-config --version ) >/dev/null 2>&1 ; then
      _gtkconfig="gtk-config"
    elif ( gtk12-config --version ) >/dev/null 2>&1 ; then
      _gtkconfig="gtk12-config"
    else
      die "the GUI requires GTK (which was not found)"
    fi
  fi
  _gtk=`$_gtkconfig --version 2>&1`
  _inc_gtk=`$_gtkconfig --cflags 2>&1`
  _ld_gtk=`$_gtkconfig --libs 2>&1`
  echores "$_gtk (using $_gtkconfig)"

  # Check for GLIB
  echocheck "glib version"
  if test -z "$_glibconfig" ; then
    if ( glib-config --version ) >/dev/null 2>&1 ; then
      _glibconfig="glib-config"
    elif ( glib12-config --version ) >/dev/null 2>&1 ; then
      _glibconfig="glib12-config"
    else
      die "the GUI requires GLIB (which was not found)"
    fi
  fi
  _glib=`$_glibconfig --version 2>&1`
  _inc_glib=`$_glibconfig --cflags 2>&1`
  _ld_glib=`$_glibconfig --libs 2>&1`
  echores "$_glib (using $_glibconfig)"

  _def_gui='#define HAVE_NEW_GUI 1'
  _ld_gui='$(GTKLIB) $(GLIBLIB)'

  echo
  echo "Creating Gui/config.mak"
  cat > Gui/config.mak << EOF
# -------- Generated by configure -----------

GTKINC = $_inc_gtk
GTKLIBS = $_ld_gtk
GLIBINC = $_inc_glib
GLIBLIBS = $_ld_glib

EOF

else
  _def_gui='#undef HAVE_NEW_GUI'
fi
# --------------- GUI specific tests end -------------------



#############################################################################

# Checking for CFLAGS
if test "$_profile" || test "$_debug" ; then
  CFLAGS="-W -Wall -O2 $_march $_mcpu $_debug $_profile"
elif test -z "$CFLAGS" ; then
  if test "$host_arch" != "mips" ; then
    CFLAGS="-O4 $_march $_mcpu -pipe -ffast-math -fomit-frame-pointer"
  else
    CFLAGS="-O4 $_march $_mcpu -ffast-math -fomit-frame-pointer"
  fi
else
  cat <<EOF

MPlayer compilation will use CFLAGS set by you, but:
             DO NOT BUGREPORT IF IT DOES NOT WORK

It is strongly recommended you let MPlayer choose the correct CFLAGS!
To do so, execute 'CFLAGS= ./configure <options>'

EOF
fi

# Thread support
if linux ; then
  CFLAGS="$CFLAGS -D_REENTRANT"
elif bsd ; then
  # FIXME bsd needs this so maybe other OS'es
  CFLAGS="$CFLAGS -D_THREAD_SAFE"
fi

# 64 bit file offsets?
if test "$_largefiles" = yes || freebsd ; then
  CFLAGS="$CFLAGS -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
  if test "$_dvdread" = yes ; then
    # dvdread support requires this (for off64_t)
    CFLAGS="$CFLAGS -D_LARGEFILE64_SOURCE"
  fi
fi

# Determine OS dependent libs
if cygwin ; then
  _confcygwin='TARGET_CYGWIN = yes'
  _def_confwin32='#define WIN32'
else
  _confcygwin="TARGET_CYGWIN = no"
fi

# Dynamic linking flags 
# (FIXME: 'echocheck "dynamic linking"' above and modify here accordingly)
_ld_dl_dynamic=''
bsd && _ld_dl_dynamic='-rdynamic'
test "$_xanim" = yes && _ld_dl_dynamic='-rdynamic'

_ld_arch="$_ld_arch $_ld_pthread $_ld_dl $_ld_dl_dynamic"
bsdos && _ld_arch="$_ld_arch -ldvd"

_def_debug='#undef MP_DEBUG'
test "$_debug" && _def_debug='#define MP_DEBUG 1'

_def_linux='#undef TARGET_LINUX'
linux && _def_linux='#define TARGET_LINUX 1'

# TODO cleanup the vidix stuff here
_def_vidix='#define CONFIG_VIDIX 1'
test "$_vidix" = no && _def_vidix='#undef CONFIG_VIDIX'
if test "$_vidix" = yes && test "$_x11" = yes; then
  _vosrc="$_vosrc vo_xvidix.c"
  _vomodules="xvidix $_vomodules"
fi
echo Checking for vidix ... "$_vidix"

_def_new_input='#undef HAVE_NEW_INPUT'
_def_joystick='#undef HAVE_JOYSTICK'
echo Checking for new input ... "$_new_input"
if test "$_new_input" = yes ; then 
  _def_new_input='#define HAVE_NEW_INPUT 1'
  _ld_new_input="-Linput -linput"
  if test "$_joystick" = yes ; then
    if linux ; then
       # TODO add some check
       _def_joystick='#define HAVE_JOYSTICK 1'
    else
       _joystick="no (unsupported under $system_name)"
    fi
  fi
  echo Checking for joystick ... "$_joystick"
fi

echocheck "lirc"
if test "$_lirc" = auto ; then
  _lirc=no
  if test -c /dev/lirc ; then
      cat > $TMPC <<EOF
#include <lirc/lirc_client.h>
int main(void) { return 0; }
EOF
      cc_check -llirc_client && _lirc=yes
  fi
fi
if test "$_lirc" = yes ; then
  _def_lirc='#define HAVE_LIRC 1'
  if test "$_new_input" = yes ; then
     _ld_new_input="-llirc_client $_ld_new_input"
  else
     _ld_lirc='-llirc_client'
  fi
else
  _def_lirc='#undef HAVE_LIRC'
fi
echores "$_lirc"

# checking for extra performance
_def_xp='#undef __ENABLE_XP'
test "$_enable_xp" = yes && _def_xp='#define __ENABLE_XP 1'
echo Checking for xp = bleeding edge ... "$_enable_xp"

#############################################################################
echo "Creating config.mak"
cat > config.mak << EOF
# -------- Generated by configure -----------

LANG = C
TARGET_OS = $system_name
prefix = $_prefix
DATADIR = $_datadir
CONFDIR = $_confdir
AR = ar
CC = $_cc
AWK = $_awk
# OPTFLAGS = -O4 $_profile $_debug $_march $_mcpu -pipe -fomit-frame-pointer -ffast-math
OPTFLAGS = $CFLAGS
EXTRA_INC = $_inc_extra $_inc_gtk
WIN32_PATH = -DWIN32_PATH=\\"$_win32libdir\\"

STREAMING = $_streaming
STREAMING_LIB = $_ld_streaming
VIDIX = $_vidix

OPENDIVX = $_opendivx

VO2 = $_vo2

PNG = $_mkf_png
JPEG = $_mkf_jpg

EXTRA_LIB = $_ld_extra
Z_LIB =  $_ld_static $_ld_zlib
HAVE_MLIB = $_mlib
STATIC_LIB = $_ld_static

X11_INC = $_inc_x11
X11DIR = $_ld_x11

# video output
X_LIB = $_ld_x11 $_ld_gl $_ld_dga $_ld_xv $_ld_vm $_ld_xinerama $_ld_mad $_ld_sock
GGI_LIB = $_ld_ggi
MLIB_LIB =  $_ld_mlib
MLIB_INC = $_inc_mlib
PNG_LIB = $_ld_png
JPEG_LIB = $_ld_jpg
SDL_LIB = $_ld_sdl
SVGA_LIB = $_ld_svga
AA_LIB = $_ld_aa

# audio output
ALSA_LIB = $_ld_alsa
NAS_LIB = $_ld_nas
MAD_LIB = $_ld_mad
VORBIS_LIB = $_ld_vorbis
SGIAUDIO_LIB = $_ld_sgiaudio

# input
TERMCAP_LIB = $_ld_termcap
LIRC_LIB = $_ld_lirc
CSS_USE = $_css
CSS_LIB = $_ld_css
SDL_INC = $_inc_sdl
W32_DEP = $_dep_win32
W32_LIB = $_ld_win32
DS_DEP = $_dep_dshow
DS_LIB = $_ld_dshow
AV_DEP = $_dep_libavcodec
AV_LIB = $_ld_libavcodec
MP1E_DEP = $_dep_mp1e
MP1E_LIB = $_ld_mp1e
ARCH_LIB =  $_ld_arch $_ld_iconv
DIVX4LINUX = $_divx4linux
XVID = $_xvid
DECORE_LIB = $_ld_decore
MENCODER = $_mencoder
ENCORE_LIB =  $_ld_encore $_ld_mp3lame
DIRECTFB_LIB = $_ld_directfb
NEW_INPUT_LIB = $_ld_new_input

# --- Some stuff for autoconfigure ----
$_target_arch
$_confcygwin
TARGET_CPU=$iproc
TARGET_MMX = $_mmx
TARGET_MMX2 = $_mmx2
TARGET_3DNOW = $_3dnow
TARGET_3DNOWEX = $_3dnowex
TARGET_SSE = $_sse

BINUTILS = $_binutils

# --- GUI stuff ---
GTKLIB = $_ld_static $_ld_gtk
GLIBLIB = $_ld_static  $_ld_glib
GTK_LIBS =  $_ld_static $_ld_gui
GUI = $_gui
DEBUG = -DDEBUG

# --- HAZARDOUS STUFF

ENABLE_XP=$_enable_xp

EOF

#############################################################################
echo "Creating config.h"
cat > config.h << EOF
/* -------- This file has been automatically generated by configure ---------
   Note: Any changes in it will be lost when you run configure again. */

#define USR_PREFIX "$_prefix"

/* define this to use simple idct with patched libavcodec */
#define SIMPLE_IDCT 1

#define USE_OSD 1
#define USE_SUB 1

/* Toggles debugging informations */
$_def_debug

/* Indicates is Ogle's libdvdread is available for DVD playback */
$_def_dvdread

/* Common data directory (for fonts, etc) */
#define DATADIR "$_datadir"
#define CONFDIR "$_confdir"
#define LIBDIR "$_libdir"

/* Define this to compile stream-caching support, it can be enabled via
   -cache <kilobytes> */
#define USE_STREAM_CACHE 1

/* Define to include support for XviD/Divx4Linux/OpenDivx */
$_def_divx

/* Define for using new XviD/DivX4Linux library, instead of open-source OpenDivX */
/* You have to change DECORE_LIBS in config.mak too! */
$_def_decore

/* Define if you are using DivX5Linux Decore library */
$_def_divx5

/* If build mencoder */
$_mencoder_flag

/* Indicates if XviD/Divx4linux encore is available
   Note: for mencoder */
$_def_encore

/* Indicates if libmp3lame is available
   Note: for mencoder */
$_def_mp3lame

/* Define libmp1e for realtime mpeg encoding (for DXR3 and DVB cards) */
$_def_mp1e

/* Define this to enable avg. byte/sec-based AVI sync method by default:
   (use -bps or -nobps commandline option for run-time method selection)
   -bps gives better sync for vbr mp3 audio, it is now default */
#define AVI_SYNC_BPS 1

/* Undefine this if you do not want to select mono audio (left or right)
   with a stereo MPEG layer 2/3 audio stream. The command-line option
   -stereo has three possible values (0 for stereo, 1 for left-only, 2 for
   right-only), with 0 being the default.
   */
#define USE_FAKE_MONO 1

/* Undefine this if your soundcard driver has no working select().
   If you have kernel Oops, player hangups, or just no audio, you should
   try to recompile MPlayer with this option disabled! */
$_def_select

/* define this to use iconv(3) function to codepage conversions */
$_def_iconv

/* define this to use RTC (/dev/rtc) for video timers (LINUX only) */
$_def_rtc

/* set up max. outburst. use 65536 for ALSA 0.5, for others 16384 is enough */
#define MAX_OUTBURST 65536

/* set up audio OUTBURST. Do not change this! */
#define OUTBURST 512

/* Define this if your system has the header file for the OSS sound interface */
$_def_sys_soundcard

/* Define this if your system has the "malloc.h" header file */
$_def_malloc

/* memalign is mapped to malloc if unsupported */
$_def_memalign
#ifndef HAVE_MEMALIGN
# define memalign(a,b) malloc(b)
#endif

/* Define this if your system has the "alloca.h" header file */
$_def_alloca

/* Define this if your system has the "sys/mman.h" header file */
$_def_mman

/* Define this if you have the elf dynamic linker -ldl library */
$_def_dl

/* Define this if you have the kstat kernel statistics library */
$_def_kstat

/* Define this if you have zlib */
$_def_zlib

/* Define this if you have shm support */
$_def_shm

/* Define this if your system has vsscanf */
$_def_vsscanf

/* LIRC (remote control, see www.lirc.org) support: */
$_def_lirc

/* DeCSS support using libcss */
$_def_css

/* Define this to enable MPEG 1/2 image postprocessing (requires FAST cpu!) */
#define MPEG12_POSTPROC 1

/* Define this to enable image postprocessing in libavcodec (requires FAST cpu!) */
$_def_ffpostprocess

/* Define to include support for OpenDivx postprocessing */
$_def_odivx_postprocess

/* Win32 DLL support */
$_def_win32

/* DirectShow support */
$_def_dshow

/* ffmpeg's libavcodec support (requires libavcodec source) */
$_def_libavcodec
$_def_libavcodecso

/* Use libavcodec's decoders */
#define CONFIG_DECODERS 1
/* Use libavcodec's encoders */
#define CONFIG_ENCODERS 1

/* XAnim DLL support */
$_def_xanim
/* Default search path */
$_def_xanim_path

/* Use 3dnow/mmxext/sse/mmx optimized fast memcpy() [maybe buggy... signal 4]*/
$_def_fastmemcpy

/* gui support, please do not edit this option */
$_def_gui
#define PREFIX "$_prefix"

/* Audio output drivers */
$_def_ossaudio
$_def_ossaudio_devdsp
$_def_ossaudio_devmixer
$_def_alsa5
$_def_alsa9
$_def_sunaudio
$_def_sgiaudio
$_def_nas

/* Enable fast OSD/SUB renderer (looks ugly, but uses less CPU power) */
#undef FAST_OSD
#undef FAST_OSD_TABLE

/* Enable TV Interface support */
$_def_tv

/* Enable Video 4 Linux TV interface support */
$_def_tv_v4l

/* Define if your processor stores words with the most significant
   byte first (like Motorola and SPARC, unlike Intel and VAX).  */
$_def_words_endian

$_def_arch

/* Define this for Cygwin build for win32 */
$_def_confwin32

/* Define this to any prefered value from 386 up to infinity with step 100 */
#define __CPU__ $iproc

$_def_linux

$_def_vcd

#ifdef sun
#define	DEFAULT_CDROM_DEVICE	"/vol/dev/aliases/cdrom0"
#define DEFAULT_DVD_DEVICE	DEFAULT_CDROM_DEVICE
#else
#define DEFAULT_CDROM_DEVICE    "/dev/cdrom"
#define DEFAULT_DVD_DEVICE	"/dev/dvd"
#endif


/*----------------------------------------------------------------------------
**
** NOTE: Instead of modifying these definitions here, use the
**       --enable/--disable options of the ./configure script!
**       See ./configure --help for details.
**
*---------------------------------------------------------------------------*/

/* nanosleep support */
$_def_nanosleep

/* termcap flag for getch2.c */
$_def_termcap

/* termios flag for getch2.c */
$_def_termios
$_def_termios_h
$_def_termios_sys_h

/* enable PNG support */
$_def_png

/* enable JPEG support */
$_def_jpg

/* libmad support */
$_def_mad

/* enable OggVorbis support */
$_def_vorbis

/* enable streaming */
$_def_streaming

/* enables / disables vidix usage */
$_def_vidix

/* enables / disables new input */
$_def_new_input

/* enables / disables new input joystick support */
$_def_joystick

/* Extension defines */
$_def_3dnow	// only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.)
$_def_3dnowex	// only define if you have 3DNOWEX (AMD Athlon, etc.)
$_def_mmx	// only define if you have MMX (newer x86 chips, not P54C/PPro)
$_def_mmx2	// only define if you have MMX2 (Athlon/PIII/4/CelII)
$_def_sse	// only define if you have SSE (Intel Pentium III/4 or Celeron II)
$_def_sse2	// only define if you have SSE2 (Intel Pentium 4)

#ifdef HAVE_MMX
#define USE_MMX_IDCT 1
#endif

$_def_mlib  // Sun mediaLib, available only on solaris

/* libmpeg2 uses a different feature test macro for mediaLib */
#ifdef HAVE_MLIB
#define LIBMPEG2_MLIB 1
#endif

/* libvo options */
#define SCREEN_SIZE_X 1
#define SCREEN_SIZE_Y 1
$_def_x11
$_def_xv
$_def_vm
$_def_xinerama
$_def_gl
$_def_dga
$_def_dga2
$_def_sdl
/* defined for SDLlib with keyrepeat bugs (before 1.2.1) */
$_def_sdlbuggy
$_def_ggi
$_def_3dfx
$_def_tdfxfb
$_def_directfb
$_def_zr
$_def_mga
$_def_xmga
$_def_syncfb
$_def_fbdev
$_def_fbdev_nocopy
$_def_dxr3
$_def_dvb
$_def_svga
$_def_vesa
$_def_xdpms
$_def_aa

/* used by GUI: */
$_def_xshape

#if defined(HAVE_GL) || defined(HAVE_X11) || defined(HAVE_XV)
#define X11_FULLSCREEN 1
#endif

$_def_xp

#ifdef __ENABLE_XP
#define __ENABLE_DEC_AHEAD 1
#endif

EOF

#############################################################################

echo "Creating libvo/config.mak"
_voobj=`echo $_vosrc | sed -e 's/\.c/\.o/g'`
cat > libvo/config.mak << EOF
include ../config.mak
OPTIONAL_SRCS = $_vosrc
OPTIONAL_OBJS = $_voobj
EOF

#############################################################################

if test -d "libvo2" ; then

echo "Creating libvo2/config.mak"
_vo2obj=`echo $_vo2src | sed -e 's/\.c/\.o/g'`
cat > libvo2/config.mak << EOF
include ../config.mak
OPTIONAL_SRCS = $_vo2src
OPTIONAL_OBJS = $_vo2obj
EOF

fi

#############################################################################

echo "Creating libao2/config.mak"
_aoobj=`echo $_aosrc | sed -e 's/\.c/\.o/g'`
cat > libao2/config.mak << EOF
include ../config.mak
OPTIONAL_SRCS = $_aosrc
OPTIONAL_OBJS = $_aoobj
EOF

#############################################################################

echo "Creating help_mp.h"
cat > help_mp.h << EOF
#include "$_mp_help"
EOF

#############################################################################

#FIXME: add something like "Optimizing for: i686 mmx mmx2 sse"
cat << EOF

Config files successfully generated by ./configure !

  Install prefix: $_prefix
  Data directory: $_datadir
  Config direct.: $_confdir

  Enabled optional drivers:
    Input: $_inputmodules
    Codecs: $_codecmodules
    Audio output: $_aomodules
    Video output: $_vomodules

'config.h' and 'config.mak' contain your configuration options.
Note: if you alter theses files (for instance CFLAGS) MPlayer may no longer
      compile *** DON'T BUGREPORT if you tweak these files ***

'make' will now compile MPlayer and 'make install' will install it.
Note: On non-Linux systems you might need to use 'gmake' instead of 'make'.

EOF


if test "$_mtrr" = yes ; then
  echo "Please check mtrr settings at /proc/mtrr (see DOCS/video.html#2.2.1.1)"
  echo
fi

if test "$_sdl" = "outdated" ; then
  cat <<EOF
You have an outdated version of libSDL installed (older than v1.1.7) and SDL
support has therefore been disabled.

Please upgrade to a more recent version (version 1.1.8 and above are known to
work). You may get this library from: http://www.libsdl.org

You need to re-run ./configure and recompile after updating SDL.  If you are
only interested in the libSDL audio drivers, then older version might work.

Use --enable-sdl to force usage of libSDL.
EOF
fi

if x86 ; then
  if test "$_win32" = no ; then
    if test "$_win32libdir" ; then
      cat <<EOF
Failed to find a WIN32 codecs dir at $_win32libdir!
Create it and copy the DLL files there! (You can get them from your windows
directory or download them from:
  ftp://ftp.MPlayerHQ.hu/MPlayer/releases/w32codec.zip
EOF
    fi
  else
    if test "$_win32libdir" ; then
#      echo "Ok, found Win32 codecs directory at $_win32libdir."
      :
    else
      cat <<EOF
Failed to find a WIN32 codecs dir!
Create it and copy the DLL files there! (You can get them from your windows
directory or download them from:
  ftp://ftp.MPlayerHQ.hu/MPlayer/releases/w32codec.zip
EOF
    fi
  fi
else
  cat <<EOF
NOTE: WIN32 codec DLLs are not supported on your CPU ($host_arch).
You may encounter a few AVI files that cannot be played due to missing
opensource video/audio codec support.
EOF
fi


cat <<EOF

Check $TMPLOG if you wonder why an autodetection failed (check whether the
development headers/packages are installed).

If you suspect a bug, please read DOCS/bugreports.html.

EOF

if test "$_vidix" = no ; then
cat <<EOF
You've disabled VIDIX. Although it would be better to PORT it instead.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also currently the only driver in VIDIX is for ATI Radeon and Rage128.
Matrox G200/400 needs to be ported.
EOF
fi

# Last move:
rm -f "$TMPO" "$TMPC" "$TMPS" "$TMPCPP"