Mercurial > mplayer.hg

--- a/DOCS/man/cs/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/cs/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -848,7 +848,7 @@
 V\ některých případech dostanete více informací použitím \-msglevel identify=6.
 Například pro DVD vypíše délku (čas) každého titulu, stejně jako
 ID disku.
-Skript TOOLS/\:midentify potlačí ostatní výstup MPlayeru a (s\ trochou štěstí)
+Skript TOOLS/\:midentify.sh potlačí ostatní výstup MPlayeru a (s\ trochou štěstí)
 upraví jména souborů pro shell.
 .
 .TP
--- a/DOCS/man/de/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/de/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -976,7 +976,7 @@
 Zum Beispiel listet es f�r eine DVD die Kapitel die zeitliche L�nge jedes
 Titels sowie die Disc-ID.
 Kombiniere dies mit \-frames 0, um alle Ausgaben zu unterdr�cken.
-Das Wrapper-Script TOOLS/\:midentify unterdr�ckt die anderen Ausgaben von
+Das Wrapper-Script TOOLS/\:midentify.sh unterdr�ckt die anderen Ausgaben von
 MPlayer
 und f�hrt (hoffentlich) Shell-Escaping f�r die Dateinamen aus.
 .
--- a/DOCS/man/en/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/en/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -927,7 +927,7 @@
 For example, for a DVD it will list the chapters and time length of each title,
 as well as a disk ID.
 Combine this with \-frames 0 to suppress all output.
-The wrapper script TOOLS/\:midentify suppresses the other MPlayer output and
+The wrapper script TOOLS/\:midentify.sh suppresses the other MPlayer output and
 (hopefully) shellescapes the filenames.
 .
 .TP
--- a/DOCS/man/fr/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/fr/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -970,7 +970,7 @@
 Par exemple, pour les DVDs, cela listera la dur�e de chaque titre et de
 chaque chapitre, tout comme le num�ro d'identifiant du DVD.
 Ajoutez l'option \-frames 0 pour supprimer toute sortie console superflue.
-Le script TOOLS/\:midentify supprime le reste de l'affichage et (esp�rons-le)
+Le script TOOLS/\:midentify.sh supprime le reste de l'affichage et (esp�rons-le)
 formate les noms de fichiers pour le shell.
 .
 .TP
--- a/DOCS/man/hu/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/hu/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -927,7 +927,7 @@
 P�ld�ul egy DVD eset�n ki�rja a fejezeteket �s az egyes c�mek id�beli hossz�t,
 valamint a lemez ID-t is.
 Ha a \-frames 0 kapcsol�val haszn�lod, elnyom minden kimenetet.
-A TOOLS/\:midentify wrapper script elt�nteti a marad�k kimenetet, �s
+A TOOLS/\:midentify.sh wrapper script elt�nteti a marad�k kimenetet, �s
 (rem�lhet�leg) shell escape-eli a f�jlneveket.
 .
 .TP
--- a/DOCS/man/it/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/it/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -960,7 +960,7 @@
 Per esempio, per un DVD verranno mostrati i capitoli e la lunghezza di ogni
 titolo, cos� come l'ID del disco.
 Usala con \-frames 0 per eliminare tutte le emissioni su console.
-Lo script di appoggio TOOLS/\:midentify toglie il resto delle stampe di MPlayer
+Lo script di appoggio TOOLS/\:midentify.sh toglie il resto delle stampe di MPlayer
 e (si spera) corregge per la shell (shellescapes) i nomi dei file.
 .
 .TP
--- a/DOCS/man/pl/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/pl/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -594,7 +594,7 @@
 Pokazuje parametry zbioru w �atwo przegl�dalnym formacie.
 Wy�wietla te� dok�adniejsze informacje o j�zykach i identyfikatorach
 napis�w i �cie�ek audio.
-Skrypt TOOLS/\:midentify wycina inne napisy MPlayera i (mamy nadziej�)
+Skrypt TOOLS/\:midentify.sh wycina inne napisy MPlayera i (mamy nadziej�)
 zabezpiecza specjalne znaki przed interpretacj� przez pow�ok�.
 .
 .TP
--- a/DOCS/man/ru/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/ru/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -794,7 +794,7 @@
 ����� �������. � ��������� ������� �� ������ �������� ������ ����������, ���������
 \-msglevel identify=6.
 ��� DVD, ��������, ��� ��������� ����� ������� ��������� � ID �����.
-������ TOOLS/\:midentify ��������� ��������� ����� MPlayer � (�������) ����������
+������ TOOLS/\:midentify.sh ��������� ��������� ����� MPlayer � (�������) ����������
 ����� ������.
 .
 .TP
--- a/DOCS/man/zh/mplayer.1	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/man/zh/mplayer.1	Mon Jul 07 09:30:22 2008 +0000
@@ -880,7 +880,7 @@
 在某些情形下，使用 \-msglevel identify=6 能得到更多的信息。
 例如，对于一张 DVD 碟片，该选项能列出每个标题的章节和时长，以及一个碟片 ID 号。
 将此选项与 \-frames 0 一起使用能禁止所有输出。
-封装脚本 TOOLS/\:midentify 禁止 MPlayer 的其它输出，
+封装脚本 TOOLS/\:midentify.sh 禁止 MPlayer 的其它输出，
 并且（很可能）shellescapes（脚本转义）了文件名。
 .
 .TP
--- a/DOCS/xml/cs/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/cs/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -997,7 +997,7 @@
 Jak vytvořím (S)VCD automaticky?
 </para></question>
 <answer><para>
-Zkuste skript <filename>mencvcd</filename> z podadresáře
+Zkuste skript <filename>mencvcd.sh</filename> z podadresáře
 <filename class="directory">TOOLS</filename>.
 Pomocí něj můžete enkódovat DVD nebo jiné filmy do VCD
 nebo SVCD formátu a dokonce je vypálit přímo na CD.
@@ -1262,7 +1262,7 @@
 Jak mohu enkódovat soubor jen se zvukem?
 </para></question>
 <answer><para>
-Použijte <filename>aconvert</filename> z podadresáře
+Použijte <filename>aconvert.sh</filename> z podadresáře
 <filename class="directory">TOOLS</filename>
 ve zdrojových kódech MPlayeru.
 </para></answer>
--- a/DOCS/xml/de/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/de/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -1245,7 +1245,7 @@
         </question>
         <answer>
           <para>
-            Probiere das Script <filename>mencvcd</filename> aus dem Unterverzeichnis <filename class="directory">TOOLS</filename>.
+            Probiere das Script <filename>mencvcd.sh</filename> aus dem Unterverzeichnis <filename class="directory">TOOLS</filename>.
             Damit kannst du DVDs oder andere Filme automatisch ins VCD- oder SVCD-Format encodieren
             und sogar direkt auf CD brennen.
           </para>
@@ -1554,7 +1554,7 @@
         </question>
         <answer>
           <para>
-            Benutze <filename>aconvert</filename> vom Unterverzeichnis
+            Benutze <filename>aconvert.sh</filename> vom Unterverzeichnis
             <filename class="directory">TOOLS</filename> im MPlayer-Sourcenbaum.
           </para>
         </answer>
--- a/DOCS/xml/en/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/en/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -991,7 +991,7 @@
 How can I create (S)VCDs automatically?
 </para></question>
 <answer><para>
-Try the <filename>mencvcd</filename> script from the
+Try the <filename>mencvcd.sh</filename> script from the
 <filename class="directory">TOOLS</filename> subdirectory.
 With it you can encode DVDs or other movies to VCD or SVCD format
 and even burn them directly to CD.
@@ -1259,7 +1259,7 @@
 How can I encode an audio only file?
 </para></question>
 <answer><para>
-Use <filename>aconvert</filename> from the
+Use <filename>aconvert.sh</filename> from the
 <filename class="directory">TOOLS</filename>
 subdirectory in the MPlayer source tree.
 </para></answer>
--- a/DOCS/xml/es/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/es/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -1120,7 +1120,7 @@
 ¿Como puedo crear un VCD?
 </para></question>
 <answer><para>
-Pruebe el script <filename>mencvcd</filename> del subdirectorio <filename class="directory">TOOLS</filename>.
+Pruebe el script <filename>mencvcd.sh</filename> del subdirectorio <filename class="directory">TOOLS</filename>.
 Con él puede codificar DVDs u otras peliculas al formato VCD o SVCD e incluso
 grabarlo directamente a CD.
 </para></answer>
--- a/DOCS/xml/fr/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/fr/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -929,7 +929,7 @@
 Comment puis-je créer des (S)VCDs automatiquement?
 </para></question>
 <answer><para>
-Essayez le script <filename>mencvcd</filename> du sous-répertoire
+Essayez le script <filename>mencvcd.sh</filename> du sous-répertoire
 <filename class="directory">TOOLS</filename>. Avec lui vous pourrez encoder des DVDs
 ou d'autres films en format VCD ou SVCD et même les graver directement sur un CD.
 </para></answer>
@@ -1180,7 +1180,7 @@
 Comment puis-je encoder un fichier seulement audio?
 </para></question>
 <answer><para>
-Utilisez <filename>aconvert</filename> du sous-répertoire
+Utilisez <filename>aconvert.sh</filename> du sous-répertoire
 <filename class="directory">TOOLS</filename>
 qui se situe dans l'arbre source de MPlayer.
 </para></answer>
--- a/DOCS/xml/hu/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/hu/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -991,7 +991,7 @@
 Hogy tudok automatikusan (S)VCD-t készíteni?
 </para></question>
 <answer><para>
-Használd a <filename>mencvcd</filename> szkriptet a
+Használd a <filename>mencvcd.sh</filename> szkriptet a
 <filename class="directory">TOOLS</filename> alkönyvtárból.
 Ezzel DVD-ket és más filmeket tudsz VCD vagy SVCD formátumba
 kódolni és még közvetlenül CD-re is írhatod őket.
@@ -1259,7 +1259,7 @@
 Hogyan tudok elkódolni egy csak audiót tartalmazó fájlt?
 </para></question>
 <answer><para>
-Használd az <filename>aconvert</filename>-et a
+Használd az <filename>aconvert.sh</filename>-et a
 <filename class="directory">TOOLS</filename>
 alkönyvtárból az MPlayer forrás fájában.
 </para></answer>
--- a/DOCS/xml/it/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/it/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -1016,7 +1016,7 @@
 Come posso creare automaticamente dei (S)VCD?
 </para></question>
 <answer><para>
-Prova lo script <filename>mencvcd</filename> dalla sottodirectory
+Prova lo script <filename>mencvcd.sh</filename> dalla sottodirectory
 <filename class="directory">TOOLS</filename>.
 Con quello puoi codificare DVD, o altri film, nel formato VCD o SVCD e anche
 scriverli direttamente su CD.
@@ -1286,7 +1286,7 @@
 Come posso codificare un file solo audio?
 </para></question>
 <answer><para>
-Usa <filename>aconvert</filename> dalla sottodirectory
+Usa <filename>aconvert.sh</filename> dalla sottodirectory
 <filename class="directory">TOOLS</filename> dei sorgenti di MPlayer.
 </para></answer>
 </qandaentry>
--- a/DOCS/xml/pl/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/pl/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -1008,7 +1008,7 @@
 Jak mogę tworzyć automatycznie (S)VCD?
 </para></question>
 <answer><para>
-Wypróbuj skrypt <filename>mencvcd</filename> z podkatalogu
+Wypróbuj skrypt <filename>mencvcd.sh</filename> z podkatalogu
 <filename class="directory">TOOLS</filename>.
 Korzystając z niego, możesz kodować DVD lub inne filmy do formatu VCD lub SVCD,
 a nawet wypalać bezpośrednio na CD.
@@ -1282,7 +1282,7 @@
 Jak mogę kodować plik zawierający tylko dźwięk?
 </para></question>
 <answer><para>
-Użyj <filename>aconvert</filename> z podkatalogu
+Użyj <filename>aconvert.sh</filename> z podkatalogu
 <filename class="directory">TOOLS</filename> w drzewie źródeł
 <application>MPlayera</application>.
 </para></answer>
--- a/DOCS/xml/ru/faq.xml	Mon Jul 07 06:47:01 2008 +0000
+++ b/DOCS/xml/ru/faq.xml	Mon Jul 07 09:30:22 2008 +0000
@@ -974,7 +974,7 @@
 Как автоматически создавать (S)VCD?
 </para></question>
 <answer><para>
-Попробуйте скрипт <filename>mencvcd</filename> из каталога
+Попробуйте скрипт <filename>mencvcd.sh</filename> из каталога
 <filename class="directory">TOOLS</filename>. С его помощью вы можете перекодировать
 DVD или другие фильмы в VCD или SVCD формат и даже записывать их на CD.
 </para></answer>
@@ -1236,7 +1236,7 @@
 Как перекодировать звуковой файл (без видео)?
 </para></question>
 <answer><para>
-Используйте <filename>aconvert</filename> из подкаталога
+Используйте <filename>aconvert.sh</filename> из подкаталога
 <filename class="directory">TOOLS</filename>
 дерева каталогов MPlayer.
 </para></answer>
--- a/TOOLS/README	Mon Jul 07 06:47:01 2008 +0000
+++ b/TOOLS/README	Mon Jul 07 09:30:22 2008 +0000
@@ -25,24 +25,24 @@
 Usage:        mplayer -vo gl:yuv=4:customprog=edgedetect.fp


-midentify
+midentify.sh

 Author:       Tobias Diedrich

 Description:  Runs 'mplayer -identify' for all arguments while preventing
               video window flashing.

-Usage:        midentify file1 [file2 ...]
+Usage:        midentify.sh file1 [file2 ...]


-mpconsole
+mpconsole.sh

 Author:       Rich Felker

 Description:  Script to run MPlayer on the console (fbdev/mga_vid/etc.) without
               the console text and/or flashing cursor getting in the way.

-Usage:        mpconsole [mplayer options]
+Usage:        mpconsole.sh [mplayer options]


 mplmult.sh
@@ -90,25 +90,25 @@
 MEncoder scripts in the TOOLS dir
 ---------------------------------

-divx2svcd
+divx2svcd.sh

 Author:       Miklos Vajna

 Description:  A simple utility that creates an SVCD from a video in an AVI
               container.

-Usage:        divx2svcd <input_avi> [options]
-              see 'divx2svcd -h' for more info
+Usage:        divx2svcd.sh <input_avi> [options]
+              see 'divx2svcd.sh -h' for more info


-mencvcd
+mencvcd.sh

 Author:       Jürgen Hammelmann

 Description:  Converts DVD (or anything else that MPlayer plays) to (S)VCD

-Usage:        mencvcd <basename> [mencvcd options] [mplayer options]
-              see 'mencvcd -h' for more info
+Usage:        mencvcd.sh <basename> [mencvcd.sh options] [mplayer options]
+              see 'mencvcd.sh -h' for more info

 Note:         Requires MPlayer, mjpegtools, VCDImager, cdrdao, and optionally
               LAME, tooLAME and SoX.
@@ -143,14 +143,14 @@
               --dvd-device device to pull the video off (default: /dev/dvd)


-aconvert
+aconvert.sh

 Author:       Jonas Jermann

 Description:  A hack to allow MEncoder to read respectively encode from audio
               only files.

-Usage:        aconvert <"input file"> <"output file"> <"options">
+Usage:        aconvert.sh <"input file"> <"output file"> <"options">
               If no options are specified the following is assumed:
               -oac lavc -lavcopts acodec=mp3:abitrate=192

@@ -173,17 +173,17 @@


-encode2mpeglight
+encode2mpeglight.sh

 Author:       Giacomo Comes

 Description:  Convert anything MPlayer can play to VCD/SVCD/DVD MPEG.

-Usage:        encode2mpeglight -o <NAME> -n <NORM> [options] <source>
+Usage:        encode2mpeglight.sh -o <NAME> -n <NORM> [options] <source>
               For help and documentation run:
-                encode2mpeglight -h
-                encode2mpeglight -l
-                encode2mpeglight -doc
+                encode2mpeglight.sh -h
+                encode2mpeglight.sh -l
+                encode2mpeglight.sh -doc

 Note:         This script uses only MEncode/MPlayer. Check the final log
               file for informations/warnings about the encoding process.
--- a/TOOLS/aconvert	Mon Jul 07 06:47:01 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-# Author: Jonas Jermann
-# Description: A hack to allow mencoder to encode from an audio only file
-
-if [ "$1" = "" ]; then
-    echo "Usage: $0 <\"input file\"> <\"output file\"> <\"options\">"
-    exit 0
-fi
-
-options=${3:-"-oac mp3lame"}
-
-mencoder -demuxer rawvideo -rawvideo w=1:h=1 -ovc copy -of rawaudio -endpos `mplayer -identify $1 -frames 0 2>&1 | grep ID_LENGTH | cut -d "=" -f 2` -audiofile $1 -o $2 $options $1
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TOOLS/aconvert.sh	Mon Jul 07 09:30:22 2008 +0000
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+# Author: Jonas Jermann
+# Description: A hack to allow mencoder to encode from an audio only file
+
+if [ "$1" = "" ]; then
+    echo "Usage: $0 <\"input file\"> <\"output file\"> <\"options\">"
+    exit 0
+fi
+
+options=${3:-"-oac mp3lame"}
+
+mencoder -demuxer rawvideo -rawvideo w=1:h=1 -ovc copy -of rawaudio -endpos `mplayer -identify $1 -frames 0 2>&1 | grep ID_LENGTH | cut -d "=" -f 2` -audiofile $1 -o $2 $options $1
--- a/TOOLS/divx2svcd	Mon Jul 07 06:47:01 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,369 +0,0 @@
-#!/bin/bash
-
-# (c) 2003 Vajna Miklos <mainroot@freemail.hu>
-# divx2svcd for MPlayer
-# distributed under GPL License
-
-# simple utility that creates a SVCD from a video in an AVI container
-
-# The newest version of this utility can be found at
-# http://vmiklos.uw.hu/divx2svcd/divx2svcd
-# MPlayer available at
-# http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.0pre3try2.tar.bz2
-
-###changelog###
-#nobody cares about it :-)
-cat >/dev/null <<EOF
-0.5.1
-- faster code by not re-mplexing one-cd-size or smaller videos
-
-0.5.0
-- needless for dumpvideo patch ;-)
-
-0.4.9
-- changed default bitrate to 1600 for better quality
-- fix for burning more than one cd
-- fix for wrong parameter help
-
-0.4.8
-- small fixes
-
-0.4.7
-- fixed bug, when there is no sub available
-
-0.4.6
-- support for burning the svcd with cdrecord
-- lots of paranoid options for better quality from Denes Balatoni
-
-0.4.5
-- support for filenames including spaces
-
-0.4.4
-- support for checking all applications this script uses
-- this changelog
-
-0.4.3
-- advanced detectation of movie aspect (mpeg4 codec, mpeg container)
-
-0.4.2
-- advanced vf options for movies with non-standard aspect
-
-0.4.1
-- checking for available sub
-
-0.4.0
-- support for tcmplex-panteltje
-- support for libavcodec audio encoder
-
-0.3.1-0.3.2
-- small fixes
-
-0.3
-- almost totally rewritten from scratch
-  based on the idea of Denes Balatoni <pnis@coder.hu>
-- support for toolame instead of mp2enc
-- suppert for libavcodec mpeg2video codec instead of mpeg2enc
-
-0.2
-- support for tcmplex instead of mplex
-
-0.1rc2-rc4
-- small bugfixes
-
-0.1rc1
-- initial release
-
-EOF
-
-
-###preparing###
-#help
-
-usage()
-{
-	cat <<EOF
-Usage: `basename $0` input_avi [options]
-
-Options:
--b|--bitrate xx	bitrate of mp2 video stream [1375]
--s|--cdsize xx	size of the cd we split the video to [795]
--w|--writecd	enables burning [disable]
--d|--device xx	scsi cd-recording device if you are using linux 2.4.x [0,0,0]
--c|--clean	clean up svcd images you just created
--h|--help	this help screen
-EOF
-
-}
-
-#initializating constants
-version='0.5.1'
-bitrate=1375
-cdsize=795
-burning=0
-cleaning=0
-dev4='0,0,0'
-firstcd=1
-
-#paranoid options
-paraopts='vrc_override=1,10,708:vqcomp=0.1:vratetol=10000000:vrc_buf_size=917:vrc_maxrate=2500:intra_matrix=8,9,12,22,26,27,29,34,9,10,14,26,27,29,34,37,12,14,18,27,29,34,37,38,22,26,27,31,36,37,38,40,26,27,29,36,39,38,40,48,27,29,34,37,38,40,48,58,29,34,37,38,40,48,58,69,34,37,38,40,48,58,69,79:inter_matrix=16,18,20,22,24,26,28,30,18,20,22,24,26,28,30,32,20,22,24,26,28,30,32,34,22,24,26,30,32,32,34,36,24,26,28,32,34,34,36,38,26,28,30,32,34,36,38,40,28,30,32,34,36,38,42,42,30,32,34,36,38,40,42,44'
-
-#header
-echo "DivX2SvcD $version (C) 2003-2004 Vajna Miklos"
-echo
-
-#checking for ls
-ls=`which ls`
-
-#checking for bc
-which bc >/dev/null 2>&1
-bcbin=`which bc 2>/dev/null`
-if [ $? != 0 ]; then
-	cat <<EOF
-ERROR: Can't find bc. You can download it at
-ftp://ftp.ibiblio.org/pub/gnu/bc/bc-1.06.tar.gz
-EOF
-exit 1
-fi
-
-#checking for vcdimager
-which vcdimager >/dev/null 2>&1
-bcbin=`which vcdimager 2>/dev/null`
-if [ $? != 0 ]; then
-	cat <<EOF
-ERROR: Can't find vcdimager. You can download it at http://www.vcdimager.org
-/pub/vcdimager/vcdimager-0.7_UNSTABLE/vcdimager-0.7.14.tar.gz
-EOF
-exit 1
-fi
-
-#checking which mplex utility we have to use
-which tcmplex-panteltje >/dev/null 2>&1
-if [ $? = 0 ]; then
-	tcp_path=`which tcmplex-panteltje 2>&1`
-else
-	tcp_path="x"
-fi
-which tcmplex >/dev/null 2>&1
-if [ $? = 0 ]; then
-	tc_path=`which tcmplex 2>&1`
-else
-	tc_path="x"
-fi
-
-if [ -x $tcp_path ]; then
-	tcbin=tcmplex-panteltje
-	tcopt=-0
-elif [ -x $tc_path ]; then
-	tcbin=tcmplex
-	tcopt=-p
-else
-	cat <<EOF
-ERROR: Can't find any sutable mplex utility. You can download
-tcmplex-panteltje at http://sunsite.rediris.es/
-sites2/ibiblio.org/linux/apps/video/tcmplex-panteltje-0.3.tgz
-EOF
-exit 1
-fi
-
-#pharsing parameters
-
-if [ $# -le 0 ]; then
-	echo "Missing parameter!"
-	usage
-	exit 1
-fi
-
-case $1 in
-	-h)
-		usage
-		exit 1
-	;;
-	-*)
-		echo "Missing parameter!"
-		usage
-		exit 1
-	;;
-	*)
-		input=`echo $1 |sed 's/\\ / /'`
-		if [ "$input" = "`basename "$input"`" ]; then
-		        input="`pwd`/$1"
-		fi
-		nev=`basename "$input" .avi`
-		shift 1
-	;;
-esac
-
-while [ "$1"x != "x" ]; do
-   case $1 in
-      -b|--bitrate)
-        bitrate=$2
-	shift 1
-        ;;
-      -s|--cdsize)
-      	cdsize="$2"
-	shift 1
-	;;
-      -d|--device)
-        dev4="$2"
-	shift 1
-	;;
-      -w|--write)
-        burning=1
-	;;
-      -c|--clean)
-        cleaning=1
-	;;
-      -h|--help)
-      usage
-        exit 0
-	;;
-   esac
-   shift 1
-done
-
-#checking for cd-recording device
-if [ "$burning" = 1 ]; then
-echo -n "Searching for cdrecorder device... "
-
-if [ `uname -r |cut -d '.' -f 2` = 4 ]; then
-	#linux 2.4.x
-	dev="dev=$dev4"
-	echo "$dev4"
-elif [ `uname -r |cut -d '.' -f 2` = 6 ]; then
-	#linux 2.6.x
-	if [ -e /dev/cdrecorder ]; then
-		dev='dev=/dev/cdrecorder'
-		echo "/dev/cdrecorder"
-	else
-		cat <<EOF
-ERROR: Device file /dev/cdrecorder not found. Please link your
-cd-recording device to /dev/cdrecorder!
-Example: 'cd /dev; ln -s hdc cdrecorder'
-EOF
-		exit 1
-	fi
-else
-	cat <<EOF
-ERROR: Linux 2.4 or 2.6 series not found. You can download it at
-http://www.kernel.org/ ;-)
-EOF
-	exit 1
-fi
-
-#checking for cdrecord
-which cdrecord >/dev/null 2>&1
-cdrbin=`which cdrecord 2>/dev/null`
-if [ $? != 0 ]; then
-	cat <<EOF
-ERROR: Can't find cdrecord. You can download it at
-ftp://ftp.berlios.de/pub/cdrecord/alpha/cdrtools-2.01a20.tar.gz
-EOF
-exit 1
-else #checking for version >= 2.01a14
-	echo -n "Checking for cdrecord version >= 2.01a14... "
-	$cdrbin cuefile=a 2>&1 |grep 'Bad Option' >/dev/null 2>&1
-	if [ "$?" = 0 ]; then
-	cat <<EOF
-ERROR: Can't find cdrecord version >= 2.01a14. You can download it at
-ftp://ftp.berlios.de/pub/cdrecord/alpha/cdrtools-2.01a20.tar.gz
-EOF
-	else
-	        echo "`$cdrbin -version |cut -d ' ' -f 2`"
-	fi
-fi
-fi
-
-#checking for sub avariable
-
-if [ -f "$nev.sub" ]; then
-	subopts=$nev.sub
-else
-	subopts=''
-fi
-
-if [ "x$subopts" = "x" ]; then
-	subs=''
-else
-	subs='-sub '
-fi
-
-#checking for what height needed
-inputwidth=`mplayer -vo null -ao null "$input" -frames 1 2>/dev/null |grep '=>'|cut -d ' ' -f 5|cut -d x -f 1`
-inputheight=`mplayer -vo null -ao null "$input" -frames 1 2>/dev/null |grep '=>'|cut -d ' ' -f 5|cut -d x -f 2`
-svcdaspect=`echo -e "scale=10\n1.596/($inputwidth/$inputheight)"|bc /dev/stdin`
-height=`echo -e "scale=10\n$svcdaspect*480"|bc /dev/stdin|cut -d . -f 1`
-
-#checking for ratios less than 1.33
-istoohigh=`expr $height \> 577`
-if [ "$istoohigh" = 1 ]; then
-	height=576
-fi
-
-#find out the vf options
-if [ "$height" = 576 ]; then
-	vfopts='-vf scale=480:576'
-else
-	#-vf processes filters in reverse order
-	exy=`echo -e "scale=10\n(576-$height)/2"|bc /dev/stdin|cut -d . -f 1`
-	vfopts="-vf scale=480:$height,expand=480:576:0:$exy:1"
-	echo "Using filter options: '$vfopts'"
-fi
-
-#finish displaying informations
-if [ "$burning" = 1 ]; then
-#asking for cd
-cat <<EOF
-
-Please insert a blank cd in your cdwriter.
-(If you are using a rewritable media,
-don't forgot to blank it before using divx2svcd.)
-Press any key when your are ready.
-EOF
-read -n 1 i
-fi
-
-
-###start working###
-#encoding
-mencoder -ofps 25 -oac lavc "$input" -ovc lavc -lavcopts vcodec=mpeg2video:vbitrate=$bitrate:acodec=mp2:abitrate=128:keyint=25:aspect=4/3:$paraopts -o "${nev}2.avi" -srate 44100 -of mpeg -channels 2 $vfopts $subs "$subopts"
-
-videosize=`$ls -l "${nev}2.avi"|tr -s ' '|cut -d ' ' -f5`
-if ! [ `echo $(( $cdsize*1048576 < $videosize ))` = "1" ]; then
-	#video is smaller, than $cdsize
-	mv ${nev}2.avi ${nev}00.mpg
-else
-	#splitting
-	mplayer -dumpvideo -dumpfile "$nev.m2v" "${nev}2.avi"
-	mplayer -dumpaudio -dumpfile "$nev.mp2" "${nev}2.avi"
-	rm "${nev}2.avi"
-	echo "maxFileSize = $cdsize" > template
-	$tcbin -i "$nev.m2v" $tcopt "$nev.mp2" -o "$nev.mpg" -m s -F template
-	rm template
-	rm "$nev.m2v" "$nev.mp2"
-fi
-
-for i in *mpg
-do
-	nev2=`basename "$i" .mpg`
-	#creating images
-	vcdimager -t svcd -c "$nev2.cue" -b "$nev2.bin" "$i"
-	#burning if needs
-	if [ "$burning" = 1 ]; then
-		if [ "$firstcd" != 1 ]; then
-			cat <<EOF
-
-Please insert an another blank cd in your cdwriter.
-Press any key when your are ready.
-EOF
-			read -n 1 i
-		else
-			firstcd=2
-		fi
-		$cdrbin -v -dao $dev speed=12 gracetime=2 driveropts=burnfree -eject cuefile="$nev2.cue"
-	fi
-	#cleaning if needs
-	if [ "$cleaning" = 1 ]; then
-		rm -f "$nev2.cue" "$nev2.bin"
-	fi
-done
-rm -f "$nev"*mpg
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TOOLS/divx2svcd.sh	Mon Jul 07 09:30:22 2008 +0000
@@ -0,0 +1,369 @@
+#!/bin/bash
+
+# (c) 2003 Vajna Miklos <mainroot@freemail.hu>
+# divx2svcd for MPlayer
+# distributed under GPL License
+
+# simple utility that creates a SVCD from a video in an AVI container
+
+# The newest version of this utility can be found at
+# http://vmiklos.uw.hu/divx2svcd/divx2svcd
+# MPlayer available at
+# http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.0pre3try2.tar.bz2
+
+###changelog###
+#nobody cares about it :-)
+cat >/dev/null <<EOF
+0.5.1
+- faster code by not re-mplexing one-cd-size or smaller videos
+
+0.5.0
+- needless for dumpvideo patch ;-)
+
+0.4.9
+- changed default bitrate to 1600 for better quality
+- fix for burning more than one cd
+- fix for wrong parameter help
+
+0.4.8
+- small fixes
+
+0.4.7
+- fixed bug, when there is no sub available
+
+0.4.6
+- support for burning the svcd with cdrecord
+- lots of paranoid options for better quality from Denes Balatoni
+
+0.4.5
+- support for filenames including spaces
+
+0.4.4
+- support for checking all applications this script uses
+- this changelog
+
+0.4.3
+- advanced detectation of movie aspect (mpeg4 codec, mpeg container)
+
+0.4.2
+- advanced vf options for movies with non-standard aspect
+
+0.4.1
+- checking for available sub
+
+0.4.0
+- support for tcmplex-panteltje
+- support for libavcodec audio encoder
+
+0.3.1-0.3.2
+- small fixes
+
+0.3
+- almost totally rewritten from scratch
+  based on the idea of Denes Balatoni <pnis@coder.hu>
+- support for toolame instead of mp2enc
+- suppert for libavcodec mpeg2video codec instead of mpeg2enc
+
+0.2
+- support for tcmplex instead of mplex
+
+0.1rc2-rc4
+- small bugfixes
+
+0.1rc1
+- initial release
+
+EOF
+
+
+###preparing###
+#help
+
+usage()
+{
+	cat <<EOF
+Usage: `basename $0` input_avi [options]
+
+Options:
+-b|--bitrate xx	bitrate of mp2 video stream [1375]
+-s|--cdsize xx	size of the cd we split the video to [795]
+-w|--writecd	enables burning [disable]
+-d|--device xx	scsi cd-recording device if you are using linux 2.4.x [0,0,0]
+-c|--clean	clean up svcd images you just created
+-h|--help	this help screen
+EOF
+
+}
+
+#initializating constants
+version='0.5.1'
+bitrate=1375
+cdsize=795
+burning=0
+cleaning=0
+dev4='0,0,0'
+firstcd=1
+
+#paranoid options
+paraopts='vrc_override=1,10,708:vqcomp=0.1:vratetol=10000000:vrc_buf_size=917:vrc_maxrate=2500:intra_matrix=8,9,12,22,26,27,29,34,9,10,14,26,27,29,34,37,12,14,18,27,29,34,37,38,22,26,27,31,36,37,38,40,26,27,29,36,39,38,40,48,27,29,34,37,38,40,48,58,29,34,37,38,40,48,58,69,34,37,38,40,48,58,69,79:inter_matrix=16,18,20,22,24,26,28,30,18,20,22,24,26,28,30,32,20,22,24,26,28,30,32,34,22,24,26,30,32,32,34,36,24,26,28,32,34,34,36,38,26,28,30,32,34,36,38,40,28,30,32,34,36,38,42,42,30,32,34,36,38,40,42,44'
+
+#header
+echo "DivX2SvcD $version (C) 2003-2004 Vajna Miklos"
+echo
+
+#checking for ls
+ls=`which ls`
+
+#checking for bc
+which bc >/dev/null 2>&1
+bcbin=`which bc 2>/dev/null`
+if [ $? != 0 ]; then
+	cat <<EOF
+ERROR: Can't find bc. You can download it at
+ftp://ftp.ibiblio.org/pub/gnu/bc/bc-1.06.tar.gz
+EOF
+exit 1
+fi
+
+#checking for vcdimager
+which vcdimager >/dev/null 2>&1
+bcbin=`which vcdimager 2>/dev/null`
+if [ $? != 0 ]; then
+	cat <<EOF
+ERROR: Can't find vcdimager. You can download it at http://www.vcdimager.org
+/pub/vcdimager/vcdimager-0.7_UNSTABLE/vcdimager-0.7.14.tar.gz
+EOF
+exit 1
+fi
+
+#checking which mplex utility we have to use
+which tcmplex-panteltje >/dev/null 2>&1
+if [ $? = 0 ]; then
+	tcp_path=`which tcmplex-panteltje 2>&1`
+else
+	tcp_path="x"
+fi
+which tcmplex >/dev/null 2>&1
+if [ $? = 0 ]; then
+	tc_path=`which tcmplex 2>&1`
+else
+	tc_path="x"
+fi
+
+if [ -x $tcp_path ]; then
+	tcbin=tcmplex-panteltje
+	tcopt=-0
+elif [ -x $tc_path ]; then
+	tcbin=tcmplex
+	tcopt=-p
+else
+	cat <<EOF
+ERROR: Can't find any sutable mplex utility. You can download
+tcmplex-panteltje at http://sunsite.rediris.es/
+sites2/ibiblio.org/linux/apps/video/tcmplex-panteltje-0.3.tgz
+EOF
+exit 1
+fi
+
+#pharsing parameters
+
+if [ $# -le 0 ]; then
+	echo "Missing parameter!"
+	usage
+	exit 1
+fi
+
+case $1 in
+	-h)
+		usage
+		exit 1
+	;;
+	-*)
+		echo "Missing parameter!"
+		usage
+		exit 1
+	;;
+	*)
+		input=`echo $1 |sed 's/\\ / /'`
+		if [ "$input" = "`basename "$input"`" ]; then
+		        input="`pwd`/$1"
+		fi
+		nev=`basename "$input" .avi`
+		shift 1
+	;;
+esac
+
+while [ "$1"x != "x" ]; do
+   case $1 in
+      -b|--bitrate)
+        bitrate=$2
+	shift 1
+        ;;
+      -s|--cdsize)
+      	cdsize="$2"
+	shift 1
+	;;
+      -d|--device)
+        dev4="$2"
+	shift 1
+	;;
+      -w|--write)
+        burning=1
+	;;
+      -c|--clean)
+        cleaning=1
+	;;
+      -h|--help)
+      usage
+        exit 0
+	;;
+   esac
+   shift 1
+done
+
+#checking for cd-recording device
+if [ "$burning" = 1 ]; then
+echo -n "Searching for cdrecorder device... "
+
+if [ `uname -r |cut -d '.' -f 2` = 4 ]; then
+	#linux 2.4.x
+	dev="dev=$dev4"
+	echo "$dev4"
+elif [ `uname -r |cut -d '.' -f 2` = 6 ]; then
+	#linux 2.6.x
+	if [ -e /dev/cdrecorder ]; then
+		dev='dev=/dev/cdrecorder'
+		echo "/dev/cdrecorder"
+	else
+		cat <<EOF
+ERROR: Device file /dev/cdrecorder not found. Please link your
+cd-recording device to /dev/cdrecorder!
+Example: 'cd /dev; ln -s hdc cdrecorder'
+EOF
+		exit 1
+	fi
+else
+	cat <<EOF
+ERROR: Linux 2.4 or 2.6 series not found. You can download it at
+http://www.kernel.org/ ;-)
+EOF
+	exit 1
+fi
+
+#checking for cdrecord
+which cdrecord >/dev/null 2>&1
+cdrbin=`which cdrecord 2>/dev/null`
+if [ $? != 0 ]; then
+	cat <<EOF
+ERROR: Can't find cdrecord. You can download it at
+ftp://ftp.berlios.de/pub/cdrecord/alpha/cdrtools-2.01a20.tar.gz
+EOF
+exit 1
+else #checking for version >= 2.01a14
+	echo -n "Checking for cdrecord version >= 2.01a14... "
+	$cdrbin cuefile=a 2>&1 |grep 'Bad Option' >/dev/null 2>&1
+	if [ "$?" = 0 ]; then
+	cat <<EOF
+ERROR: Can't find cdrecord version >= 2.01a14. You can download it at
+ftp://ftp.berlios.de/pub/cdrecord/alpha/cdrtools-2.01a20.tar.gz
+EOF
+	else
+	        echo "`$cdrbin -version |cut -d ' ' -f 2`"
+	fi
+fi
+fi
+
+#checking for sub avariable
+
+if [ -f "$nev.sub" ]; then
+	subopts=$nev.sub
+else
+	subopts=''
+fi
+
+if [ "x$subopts" = "x" ]; then
+	subs=''
+else
+	subs='-sub '
+fi
+
+#checking for what height needed
+inputwidth=`mplayer -vo null -ao null "$input" -frames 1 2>/dev/null |grep '=>'|cut -d ' ' -f 5|cut -d x -f 1`
+inputheight=`mplayer -vo null -ao null "$input" -frames 1 2>/dev/null |grep '=>'|cut -d ' ' -f 5|cut -d x -f 2`
+svcdaspect=`echo -e "scale=10\n1.596/($inputwidth/$inputheight)"|bc /dev/stdin`
+height=`echo -e "scale=10\n$svcdaspect*480"|bc /dev/stdin|cut -d . -f 1`
+
+#checking for ratios less than 1.33
+istoohigh=`expr $height \> 577`
+if [ "$istoohigh" = 1 ]; then
+	height=576
+fi
+
+#find out the vf options
+if [ "$height" = 576 ]; then
+	vfopts='-vf scale=480:576'
+else
+	#-vf processes filters in reverse order
+	exy=`echo -e "scale=10\n(576-$height)/2"|bc /dev/stdin|cut -d . -f 1`
+	vfopts="-vf scale=480:$height,expand=480:576:0:$exy:1"
+	echo "Using filter options: '$vfopts'"
+fi
+
+#finish displaying informations
+if [ "$burning" = 1 ]; then
+#asking for cd
+cat <<EOF
+
+Please insert a blank cd in your cdwriter.
+(If you are using a rewritable media,
+don't forgot to blank it before using divx2svcd.)
+Press any key when your are ready.
+EOF
+read -n 1 i
+fi
+
+
+###start working###
+#encoding
+mencoder -ofps 25 -oac lavc "$input" -ovc lavc -lavcopts vcodec=mpeg2video:vbitrate=$bitrate:acodec=mp2:abitrate=128:keyint=25:aspect=4/3:$paraopts -o "${nev}2.avi" -srate 44100 -of mpeg -channels 2 $vfopts $subs "$subopts"
+
+videosize=`$ls -l "${nev}2.avi"|tr -s ' '|cut -d ' ' -f5`
+if ! [ `echo $(( $cdsize*1048576 < $videosize ))` = "1" ]; then
+	#video is smaller, than $cdsize
+	mv ${nev}2.avi ${nev}00.mpg
+else
+	#splitting
+	mplayer -dumpvideo -dumpfile "$nev.m2v" "${nev}2.avi"
+	mplayer -dumpaudio -dumpfile "$nev.mp2" "${nev}2.avi"
+	rm "${nev}2.avi"
+	echo "maxFileSize = $cdsize" > template
+	$tcbin -i "$nev.m2v" $tcopt "$nev.mp2" -o "$nev.mpg" -m s -F template
+	rm template
+	rm "$nev.m2v" "$nev.mp2"
+fi
+
+for i in *mpg
+do
+	nev2=`basename "$i" .mpg`
+	#creating images
+	vcdimager -t svcd -c "$nev2.cue" -b "$nev2.bin" "$i"
+	#burning if needs
+	if [ "$burning" = 1 ]; then
+		if [ "$firstcd" != 1 ]; then
+			cat <<EOF
+
+Please insert an another blank cd in your cdwriter.
+Press any key when your are ready.
+EOF
+			read -n 1 i
+		else
+			firstcd=2
+		fi
+		$cdrbin -v -dao $dev speed=12 gracetime=2 driveropts=burnfree -eject cuefile="$nev2.cue"
+	fi
+	#cleaning if needs
+	if [ "$cleaning" = 1 ]; then
+		rm -f "$nev2.cue" "$nev2.bin"
+	fi
+done
+rm -f "$nev"*mpg
--- a/TOOLS/encode2mpeglight	Mon Jul 07 06:47:01 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,2000 +0,0 @@
-#!/bin/bash
-#
-# Version:          0.6.3
-#
-# Licence:          GPL
-#
-# 2004-05-22        Giacomo Comes <encode2mpeg at users.sourceforge.net>
-# 2006-11-06                      <encode2mpeg at email.it>
-#
-# Purpose:          Convert anything MPlayer can play to AVI/VCD/SVCD/DVD MPEG
-#
-#   encode2mpeglight is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation; either version 2 of the License.
-
-#   encode2mpeglight is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-
-#   You should have received a copy of the GNU General Public License
-#   along with encode2mpeglight; if not, write to the Free Software
-#   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-###############################################################################
-#   encode2mpeglight is a program that can create VCD/SVCD/DVD MPEGs
-#   and eventually extract VobSub subtitles from a DVD using only
-#   MEncoder/MPlayer.
-#
-#   encode2mpeglight is a stripped release of encode2mpeg and therefore the
-#   code is redundant in several places, with many variables defined and
-#   used for no apparent reason. This cannot be avoided easily.
-#   A command line like:
-#     encode2mpeglight <encode2mpeglight options>
-#   will produce almost the same results as:
-#     encode2mpeg -mpeg -mpegonly <encode2mpeglight options>
-#
-#   If you need more features like:
-#     - two or more audio streams, chapters, subtitles, menu
-#     - creation, burn and verification of the disk image
-#     - creation of MPEG-4 avi and subtitles for a hardware player
-#   and more, consider to use the full release (http://encode2mpeg.sf.net)
-#
-#   encode2mpeglight is mainly tested with the stable release of MPlayer,
-#   I try to make it work with SVN too, but due to the "unstable" nature of
-#   SVN, bugs may suddenly appear. If you find any, please report them to me.
-###############################################################################
-
-###############################################################################
-#### start
-###############################################################################
-export LC_ALL=POSIX
-set -B +f
-shopt -u xpg_echo nullglob
-PROGNAME=${0##*/}
-PROGFILE=$(type -p "$0")
-VERSION=$(awk '$2=="Version:"{print $3;exit}' <"$PROGFILE")
-BROWSER=
-
-###############################################################################
-#### some functions
-###############################################################################
-OptionsText () {
-    echo
-    echo "Arguments enclosed in [ ] are optional"
-}
-###############################################################################
-ModeText () {
-    echo
-    echo "$PROGNAME defaults to encode2mpeg's MPEG Mode, the other modes are not"
-    echo "available."
-}
-###############################################################################
-usage () {
-    echo -e "Usage: $PROGNAME options source\nOptions:"
-    sed -n '/^#### PARSING/,/^done/!d;/^done/q;/^[ 	]*-[^)]*)/,/#-/!d;s/)$//;s/) *#/ /;s/#-/# /;s/	*#L.$//;s/#//;p' "$PROGFILE"
-    ModeText
-    OptionsText
-}
-###############################################################################
-shortusage () {
-    echo -e "\n$PROGNAME  v. $VERSION  Copyright (C) 2004-2006 Giacomo Comes\n"
-    echo "This is free software; see the source for copying conditions.  There is NO"
-    echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE,"
-    echo "to the extent permitted by law."
-    echo
-    echo "Usage: $PROGNAME options source"
-    echo "Options:"
-    sed -n '/^#### PARSING/,/^done/!d;/^done/q;/^[ 	]*-[^)]*)/!d;s/)$//;s/) *#/ /;s/	*#L.$//;p' "$PROGFILE"
-    OptionsText
-}
-###############################################################################
-mp_identify () {
-    mplayer -msglevel identify=6 -vo md5sum:outfile=/dev/null -ao null -nocache -frames 0 "$@" 2>/dev/null
-}
-###############################################################################
-id_find () {
-    local ID=$1
-    shift
-    mp_identify "$@" | awk -v id=$ID -F= '$1==id{t=$2}END{print t}'
-}
-###############################################################################
-get_aspect () {
-    mplayer -vc -mpegpes, -vo null -ao null -nocache -frames 4 "$@" 2>/dev/null | sed '/^Movie-Aspect is/!d;s/.*Movie-Aspect is //;s/:.*//'
-}
-###############################################################################
-mlistopt () {
-    mplayer -list-options 2>&1 | awk '$1=="Name"{m=1}{if(m&&$1!="Name"&&$1!=""&&$1!="Total:")print "\""$1"\""}'
-}
-###############################################################################
-do_log () {
-    echo "$1"
-    ((LG)) && echo "$1" >>"$output".log || WARN="$WARN${WARN:+\n}$1"
-}
-###############################################################################
-isarg () {
-    if [[ ${2:0:1} = - || ! $2 || $2 = help ]]; then
-        [[ ${2:0:1} = - ]] && echo "**ERROR: [$PROGNAME] invalid argument '$2' for option '$1'"
-        [[ ! $2 ]] && echo "**ERROR: [$PROGNAME] invalid null argument for option '$1'"
-        "$PROGFILE" -norc -l | sed '/^        '$1'$/,/^        -/!d' | sed '$d'
-        "$PROGFILE" -norc -l | sed '/^        '$1'[ |]/,/^        -/!d' | sed '$d'
-        exit 1
-    fi
-    if [[ $2 = doc ]]; then
-        show_html ${3:+$3.html}
-        exit
-    fi
-}
-###############################################################################
-pr_date () {
-    echo "[$(date '+%Y-%m-%d %H:%M:%S')]"
-}
-###############################################################################
-pr_time () {
-    date '+%j %H %M %S' | awk '{print $1*86400+$2*3600+$3*60+$4}'
-}
-###############################################################################
-get_abr () {
-    local INFO ABR
-    INFO=$(mp_identify "${MPLAYEROPT[@]}" ${dvddev:+-dvd-device "$dvddev"} "$@" | grep '^ID_')
-    ABR=$(echo "$INFO" | grep '^ID_AUDIO_BITRATE' | tail -1 | cut -f2 -d=)
-    case $(echo "$INFO" | grep '^ID_AUDIO_CODEC' | cut -f2 -d=) in
-        dvdpcm) abr=$((abr+ABR/1024)) ;;
-        *)      abr=$((abr+ABR/1000)) ;;
-    esac
-}
-###############################################################################
-get_pwd () {
-    pushd &>/dev/null "$1"
-    echo "$PWD/$2"
-    popd &>/dev/null
-}
-###############################################################################
-show_html () {
-    local i LIST HTML PREFIX OPTION INSTDOCDIR SRCDOCDIR
-    INSTDOCDIR=${PROGFILE%/bin/$PROGNAME}/share/doc/encode2mpeg
-    SRCDOCDIR=${PROGFILE%/$PROGNAME}/doc
-    if [[ -f $INSTDOCDIR/encode2mpeg.html ]]; then
-        HTML=$(get_pwd "$INSTDOCDIR" encode2mpeg.html)
-    elif [[ -f $SRCDOCDIR/encode2mpeg.html ]]; then
-        HTML=$(get_pwd "$SRCDOCDIR" encode2mpeg.html)
-    else
-        HTML="http://encode2mpeg.sourceforge.net"
-    fi
-    if [[ -f $INSTDOCDIR/html/$1 ]]; then
-        HTML=$(get_pwd "$INSTDOCDIR/html" $1)
-    elif [[ -f $SRCDOCDIR/html/$1 ]]; then
-        HTML=$(get_pwd "$SRCDOCDIR/html" $1)
-    elif [[ $1 && ! -d $INSTDOCDIR/html && ! -d $SRCDOCDIR/html ]]; then
-        HTML="http://encode2mpeg.sourceforge.net/html/$1"
-    fi
-    LIST=(mozilla seamonkey firefox)
-    [[ ${HTML:0:1} = / ]] && PREFIX=file:// || PREFIX=
-    for ((i=0;i<${#LIST[*]};i++)); do
-        type ${LIST[i]} &>/dev/null && ${LIST[i]} -remote 'openURL('"$PREFIX$HTML"',new-tab)' 2>/dev/null && return
-    done
-    LIST=(mozilla firefox seamonkey opera konqueror epiphany galeon)
-    if [[ $BROWSER ]]; then
-        type "$BROWSER" &>/dev/null && LIST=("$BROWSER") || echo "++ WARN: default browser '$BROWSER' not found, using builtin browser list"
-    fi
-    for ((i=0;i<${#LIST[*]};i++)); do
-        if type "${LIST[i]}" &>/dev/null; then
-            case ${LIST[i]} in
-                opera) OPTION=--newpage ;;
-                epiphany|galeon) OPTION=--new-tab ;;
-                *) OPTION= ;;
-            esac
-            "${LIST[i]}" $OPTION "$HTML" &
-            return
-        fi
-    done
-}
-
-###############################################################################
-#### variable initialization
-###############################################################################
-abr=;asr=;vbr=;vfr=;videonorm=;frameformat=;output=;audioformat=;mp1=;mp2=;mp3=;ac3=;dts=;lpcm=;aac=;normalize=;volume=;multiaudio=;mpegchannels=;quiet=;resume=;blank=;encode=;ofps=;mono=;usesbr=;sbr=;clear=;keep=;frames=;avisplit=;channels=;vcustom=;acustom=;cpu=;interlaced=;mpegaspect=;intra_matrix=;inter_matrix=;fixavi=;mpeg=;crop=;audioid=;dvdaudiolang=;bframes=;firstchap=;lastchap=;dvdtrack=;addchapter=;cdi=;mpegfixaspect=;nowait=;vf=;frameres=;trick=;autocrop=;afm=;cache=;removecache=;turbo=;dvddev=;srate=;endpos=;fourcc=;menu=;menubg=;dvdtitle=;rotate=;menuvtsbg=;autosync=;telecine=;AFMT=;telesrc=;vcodec=;vrfyumnt=;burniso=;verify=;fixasync=;removedir=;MPGRES=;GOP=;TXTSUBOPT=;usespeed=;testmca=;chconf=;noodml=;pictsrc=;slideaudio=;audioonly=;norc=;rawsub=;vobsubsrc=;af=;lavf=;subrender=;harddup=;overburn=
-unset encsid encsdx encsla addsub addsdx addsla savecache txtsub txtsubopts
-zoom=0
-scale=1
-fast=1
-MAXSTEP=6 # burn is the default
-step=$MAXSTEP
-split=0
-vbitrate=16000
-mpegmbr=0
-overscan=0
-iter=0
-bakiter=0
-hispeed=0
-BGTITLE=1
-TANIM=0
-TFMT=png
-TMODE=0
-TKFRM=0
-TSECS=5
-TPART=4
-TPARTSEC=15
-TFONTSIZE=1
-TFONTBG=1
-TLINES=2
-TCPR=2
-MENUERR=0
-DVDPLAY=0
-MENUOS=0
-TSETB=1
-DVDFS=1
-VTSMBG=0
-menufix=0
-cdburndevice=0,0,0
-dvdburndevice=/dev/cdrecorder
-fsize=;fint=;ffrac=;fpre=;audiosize=0
-ASPECT=(1 1 4/3 16/9 2.21)
-CH6LIST=(l r ls rs c lfe)
-TOOL=
-MPEG2ENCOPT=;YUVSCALEROPT=;YUVDENOISE=;MPLEXOPT=;VCDIMAGEROPT=;DVDAUTHOROPT=;CDRDAOOPT=;GROWISOFSOPT=;MUSICINOPT=
-unset MPLAYEROPT MPLEXSTREAM MENCODEROPT
-LPCMPAR=
-SUBLANG=
-unset SUBTEXT AUDIOTEXT CHAPTERTEXT TITLESET EXTWAV PROFILE MSRC
-unset CLEAN
-DEBUG=0
-LAVC=
-WARN=
-LOG=
-LG=0
-SVN=0
-MAXFIX=20
-timelen=0
-ocrsub=0
-slidefps=1
-default_intra=8,16,19,22,26,27,29,34,16,16,22,24,27,29,34,37,19,22,26,27,29,34,34,38,22,22,26,27,29,34,37,40,22,26,27
-default_intra=$default_intra,29,32,35,40,48,26,27,29,32,35,40,48,58,26,27,29,34,38,46,56,69,27,29,35,38,46,56,69,83
-default_inter=16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16
-default_inter=$default_inter,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16
-hires_intra=8,16,18,20,24,25,26,30,16,16,20,23,25,26,30,30,18,20,22,24,26,28,29,31,20,21,23,24,26,28,31,31,21,23,24
-hires_intra=$hires_intra,25,28,30,30,33,23,24,25,28,30,30,33,36,24,25,26,29,29,31,34,38,25,26,28,29,31,34,38,42
-hires_inter=$default_inter
-kvcd_intra=8,9,12,22,26,27,29,34,9,10,14,26,27,29,34,37,12,14,18,27,29,34,37,38,22,26,27,31,36,37,38,40,26,27,29
-kvcd_intra=$kvcd_intra,36,39,38,40,48,27,29,34,37,38,40,48,58,29,34,37,38,40,48,58,69,34,37,38,40,48,58,69,79
-kvcd_inter=16,18,20,22,24,26,28,30,18,20,22,24,26,28,30,32,20,22,24,26,28,30,32,34,22,24,26,30,32,32,34,36,24,26
-kvcd_inter=$kvcd_inter,28,32,34,34,36,38,26,28,30,32,34,36,38,40,28,30,32,34,36,38,42,42,30,32,34,36,38,40,42,44
-tmpgenc_intra=8,16,19,22,26,27,29,34,16,16,22,24,27,29,34,37,19,22,26,27,29,34,34,38,22,22,26,27,29,34,37,40,22,26,27
-tmpgenc_intra=$tmpgenc_intra,29,32,35,40,48,26,27,29,32,35,40,40,58,26,27,29,34,38,46,56,69,27,29,35,38,46,56,69,83
-tmpgenc_inter=16,17,18,19,20,21,22,23,17,18,19,20,21,22,23,24,18,19,20,21,22,23,24,25,19,20,21,22,23,24,26,27,20,21,22
-tmpgenc_inter=$tmpgenc_inter,23,25,26,27,28,21,22,23,24,26,27,28,30,22,23,24,26,27,28,30,31,23,24,25,27,28,30,31,33
-TXTSUBDEF=( languageId nolang delay 0 font arial.ttf size 28 bottom-margin 30 characterset ISO8859-1 movie-height-reduction 0 fps default )
-AVISUBDEF=( format SubViewer name-extension null fileformat unix version-number off delay 0 fps default suffix default )
-
-#### encode2mpeglight defauls
-mpeg=1
-encode=7:2:2
-
-(($#)) || ! shortusage || exit 1
-CMD=( "$@" )
-
-#### options array
-MOPT=( $(mlistopt | grep -v -e : -e '*')
-       $(mlistopt | sed -n '/:/s/:.*/"/p' | uniq)
-       $(mplayer -vfhelp 2>&1 | awk '/vf-/{printf("\"%s\"\n",$1)}')
-       $(mplayer -zrhelp 2>/dev/null | awk '$1~/^-zr/{printf("\"%s\"\n",substr($1,2))}') )
-
-###############################################################################
-#### check rc file
-###############################################################################
-if [[ -s ~/.encode2mpegrc ]]; then
-    for ((i=0;i<${#CMD[*]};i++)); do
-        [[ ${CMD[i]} = -norc ]] && norc=1 && break
-    done
-    if [[ ! $norc ]] && ! awk '{if($1~"^#")exit 1}' ~/.encode2mpegrc ; then
-        do_log "++ WARN: [$PROGNAME] ~/.encode2mpegrc appears to contain comments, ignoring it" >/dev/null
-        norc=1
-    fi
-    [[ ! $norc ]] && set -- $(<~/.encode2mpegrc) "$@"
-fi
-
-###############################################################################
-#### arguments parsing
-###############################################################################
-while (($#)) ; do
-#### PARSING
-    case $1 in
-        -h|-help)
-            #-list the available options
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2
-            shortusage
-            exit
-            ;;
-        -l|-longhelp)
-            #-print this help page
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2
-            usage
-            exit
-            ;;
-        -doc|-documentation) #[[<browser>:][<html page>]]
-            #-show the html documentation
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2
-            [[ ${2%:*} != $2 ]] && BROWSER=${2%:*}
-            show_html ${2#*:}
-            exit
-            ;;
-        -noshowlog)
-            #-do not show the log file
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2
-            quiet=1
-            ;;
-        -o|-output) #<filename>
-            #-filename of the output stream
-            echo "$2" | grep -q '/' && [[ ! -d ${2%/*} ]] && echo "**ERROR: [$PROGNAME] directory ${2%/*} argument of '$1' not found" && exit 1
-            output=$2
-            shift
-            ;;
-        -a) #<n>
-            # aspect ratio     VCD SVCD  DVD
-            #     1 -    1:1    x    *    x	x = mpeg2enc and mencoder
-            #     2 -    4:3    x    x    x	* = mencoder only
-            #     3 -   16:9    x    x    x
-            #-    4 -  2.21:1        *    x
-            MPEG2ENCOPT="$MPEG2ENCOPT -a $2"
-            [[ $2 -eq 0 ]] && MPEG2ENCOPT="${MPEG2ENCOPT% ${2}} 1"
-            mpegaspect=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -mpegfixaspect) #[pad|crop]
-            # force the aspect ratio of the source video to match the one
-            # specified with -a; this can be done padding the video with
-            #-black lines or cropping the video; the default is padding
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 aspect
-            mpegfixaspect=0
-            if [[ $2 = pad || $2 = crop ]]; then
-                [[ $2 = crop ]] && mpegfixaspect=1
-                shift
-            fi
-            ;;
-        -rotate) #<0-3>
-            # rotate the source video by 90 degrees; set -mpegfixaspect;
-            # 0 rotate clockwise and flip, 1 rotate clockwise
-            #-2 rotate counterclockwise, 3 rotate counterclockwise and flip
-            rotate=1
-            echo "$2" | grep -q '^[0-3]$' && rotate=$2
-            isarg $1 "$2" aspect
-            shift
-            : ${mpegfixaspect:=0}
-            ;;
-        -overscan) #<n>
-            # shrink the video of n% and surround it with black borders,
-            # n can be 1-99, using 10 should make visible on a TV the full video
-            # image; if n is negative, the result is a magnification of the
-            # central part of the image; n>0 set -mpegfixaspect pad, n<0 set
-            #--mpegfixaspect crop; in Avi Mode n can only be positive
-            echo "$2" | grep -qE '^-?[0-9]?[0-9]$' && overscan=$2
-            [[ ${2:0:1} = - ]] && mpegfixaspect=1 || mpegfixaspect=0
-            isarg $1 "${2#-}" $( ((step==1)) && echo Avi || echo aspect)
-            shift
-            ;;
-        -abr) #<n>
-            #-audio bit rate of the VCD/SVCD/DVD [MP2:224,MP3:128,AC3:448]
-            if [[ $2 = list ]]; then
-                sed '/^check_abr/,/case/!d;/'"$audioformat"':/!d;/[^0-9]'"$asr"'/!d;s/[^)]*)//;s/  */ /g;s/^/'"$audioformat $asr"'/' "$PROGFILE"
-                exit
-            fi
-            abr=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -asr) #<n>
-            #-audio sample rate of the VCD/SVCD/DVD [MP2/MP3:44100,AC3:48000]
-            asr=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -vbr) #<n>
-            #-video bit rate of the VCD/SVCD/DVD [VCD:1152,SVCD:2500,DVD:7500]
-            vbr=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -vfr) #<n>
-            # video frame rate of the output stream
-            # [NTSC/VCD:4,NTSC/SVCD-DVD:1,PAL:3,AVI:2]
-            #     1 - 24000.0/1001.0 (NTSC 3:2 pulldown converted FILM)
-            #     2 - 24.0 (NATIVE FILM)
-            #     3 - 25.0 (PAL/SECAM VIDEO / converted FILM)
-            #     4 - 30000.0/1001.0 (NTSC VIDEO)
-            #     5 - 30.0
-            #     6 - 50.0 (PAL FIELD RATE)
-            #     7 - 60000.0/1001.0 (NTSC FIELD RATE)
-            #-    8 - 60.0
-            vfr=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -n|-video-norm) #<n|p|s>
-            # set the video norm of the VCD/SVCD/DVD; NTSC is USA standard,
-            # PAL is European standard and SECAM is French standard; concerning
-            #-VCD/SVCD/DVD encoding, SECAM is equivalent to PAL
-            case $2 in
-                n|N|ntsc|NTSC)   videonorm=n ;;
-                p|P|pal|PAL)     videonorm=p ;;
-                s|S|secam|SECAM) videonorm=s ;;
-                doc|help) isarg $1 $2 direct ;;
-                *) echo "**ERROR: [$PROGNAME] invalid argument '$2' for option '$1'" ; "$PROGFILE" -norc $1 help ; exit 1 ;;
-            esac
-            shift
-            ;;
-        -p|-pulldown|-telecine) #
-            # set a flag in the output stream of the SVCD/DVD that tell the
-            # decoder to play the movie as NTSC video using "3:2 pull-down"
-            #-instead of "-vfr 4" use "-vfr 1 -p" (smaller output stream)
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            telecine=1
-            ;;
-        -res) #<1-7>
-            # force one of the following video resolutios:
-            #                      PAL            NTSC
-            #		1	352x288		352x240 (VCD)
-            #		2	352x576		352x480 (CVD)
-            #		3	480x576		480x480 (SVCD)
-            #		4	528x576		528x480 (KVCD)
-            #		5	544x576		544x480 (KVCD)
-            #		6	704x576		704x480 (DVB)
-            #-		7	720x576		720x480 (DVD)
-            isarg $1 "$2" direct
-            echo "$2" | grep -q '^[1-7]$' && MPGRES=$2
-            shift
-            ;;
-        -gop) #<n>
-            # set the number of pictures per GOP; the default value is the one
-            #-required by the standard
-            isarg $1 "$2" direct
-            GOP=$2
-            shift
-            ;;
-        -kvcd) #<1-4>
-            # generate KVCD (www.kvcd.net) compliant frames on output; the
-            # following resolutions are possible:
-            #		  PAL		  NTSC		GOP
-            #	1	528x576		528x480		24
-            #	2	528x576		528x480		def
-            #	3	544x576		544x480		24
-            #-	4	544x576		544x480		def
-            isarg $1 "$2" direct
-            a=1
-            echo "$2" | grep -q '^[1-4]$' && a=$2
-            shift 2
-            set -- " " -qmatrix kvcd -res $((3+(a+1)/2)) $([[ $a = [13] ]] && echo "-gop 24") "$@"
-            ;;
-        -vcd) #
-            #-generate VCD compliant frames on output (default)
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            frameformat=VCD
-            ;;
-        -svcd) #[1-2]
-            # generate SVCD compliant frames on output; the following resolutions
-            # are possible:        PAL            NTSC
-            #		1	480x576		480x480
-            #		2	352x288		352x240
-            #-default is 1
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            frameformat=SVCD
-            frameres=1
-            echo "$2" | grep -q '^[1-2]$' && frameres=$2 && shift
-            ;;
-        -svcdht) #
-            # enable the VCD header trick; this trick could allow to play SVCD on
-            # DVD player that does not support SVCD. For more details see:
-            #-http://www.videohelp.com/svcd
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            trick=1
-            ;;
-        -dvd) #[1-5]
-            # generate DVD compliant frames on output; the following resolutions
-            # are possible:        PAL            NTSC
-            #		1	720x576		720x480
-            #		2	704x576		704x480
-            #		3	480x576		480x480 (non standard DVD-SVCD)
-            #		4	352x576		352x480
-            #		5	352x288		352x240
-            #-default is 1
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            frameformat=DVD
-            frameres=1
-            echo "$2" | grep -q '^[1-5]$' && frameres=$2 && shift
-            ;;
-        -vcodec) #<mpeg1|mpeg2|mpeg4>
-            #-force the selected video codec [VCD:mpeg1,SVCD-DVD:mpeg2,AVI:mpeg4]
-            isarg $1 "$2" Avi
-            [[ $2 = mpeg[124] ]] && vcodec=$2 && [[ ${vcodec:4:1} = [12] ]] && vcodec=${vcodec}video
-            shift
-            ;;
-        -qmatrix) #<kvcd|tmpgenc|default|hi-res>
-            # mpeg2enc custom quantization matrices: kvcd produce a smaller
-            #-output stream, hi-res is good for hi-quality source material
-            case $2 in
-                kvcd|tmpgenc|default|hi-res)
-                    MPEG2ENCOPT="$MPEG2ENCOPT -K $2"
-                    intra_matrix=$(eval echo \$${2/-}_intra)
-                    inter_matrix=$(eval echo \$${2/-}_inter)
-                    ;;
-                *)
-                    MPEG2ENCOPT="$MPEG2ENCOPT -K default"
-                    intra_matrix=
-                    inter_matrix=
-                    ;;
-            esac
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -mpeg1vbr) #
-            # produce a VCD/MPEG-1 variable bit rate stream, the output stream
-            # is smaller and a complete movie could fit in one VCD; check if
-            #-your hardware player support variable bit rate VCD
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            MPEG2ENCOPT="$MPEG2ENCOPT -q 8"
-            LAVC=":vrc_buf_size=327"
-            ;;
-        -mpegmbr) #<n>
-            # set the maximum video bit rate; the default is the value of vbr;
-            #-a value of 0 remove the limit
-            mpegmbr=$2
-            [[ $2 -eq 0 ]] && mpegmbr=
-            isarg $1 "$2" mpeg
-            shift
-            ;;
-        -mpegchannels) #<1-6>
-            # number of channels of the MPEG audio stream, 1-6 for ac3 and lpcm;
-            # 1-2 for mp1, mp2 and mp3; 3-6 for mp2 Multichannel Audio; for the
-            #-avi audio stream use MPlayer's option -channels
-            mpegchannels=2
-            isarg $1 "$2" direct
-            echo "$2" | grep -q '^[1-6]$' && mpegchannels=$2
-            shift
-            ;;
-        -normalize)
-            #-normalize to the audio stream(s)
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 $([[ $encode ]] && echo Avi || echo direct)
-            normalize=1
-            ;;
-        -volume) #<n>
-            # change amplitude of the audio stream; less than 1.0 decreases,
-            #-greater than 1.0 increases (float)
-            volume=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -noscale) #
-            # encode2mpeg automatically scales the video according to the MPEG
-            # profile chosen, this option disables this feature; used mainly
-            # for debug purposes.
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            scale=
-            ;;
-        -monochrome)
-            #-create B/W video or avoid color artifacts in B/W source streams
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
-            YUVSCALEROPT="$YUVSCALEROPT -O MONOCHROME"
-            ;;
-        -split) #<n>
-            #-split the resulting MPEG stream in <n> MB chunks.
-            split=$2
-            isarg $1 "$2" direct
-            shift
-            ;;
-        -encode) #<n:m:i[,b]>
-            # the parameter n:m:i selects the audio codec, video codec options
-            # and number of pass for mencoder, possible values are:
-            #   n                   m				i
-            #   0 copy              0 copy			1
-            #   1 pcm               1 libavcodec/mpeg		2
-            #   2 mp3lame/fast      2 as 1 + mbd=2		3
-            #   3 mp3lame/standard  3 as 1 + compression opts
-            #   4 libavcodec/mp2    4 as 1 + quality opts
-            #   5 libavcodec/mp3
-            #   6 libavcodec/ac3    for m=[2-4] and i>1 turbo is on
-            #   7 toolame/mp2
-            #   8 libfaac/aac
-            #-  with n=[3-7] b specify the audio bit rate
-            encode=5:3:2
-            echo "$2" | grep -qE '^[0-8]:[0-4]:[1-9](,[0-9]+)?$' && encode=$2
-            isarg $1 "$2" $([[ $mpeg ]] && echo mpeg || echo Avi)
-            shift
-            ;;
-        -telecinesrc) #
-            # if you use -encode n:0:i in MPEG Mode, encode2mpeg needs to know
-            # if the source NTSC MPEG is telecined, otherwise the stream copy may
-            # not work properly; normally encode2mpeg is able to detect telecined
-            # sources, but, if the source MPEG is mixed, part not telecined and
-            # part telecined, encode2mpeg may fail to detect it. In such case,
-            #-you can use this option to specify a telecined source.
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 mpeg
-            telesrc=1
-            ;;
-        -turbo) #<0-1>
-            # disable (0) or force (1) turbo mode for the first pass of N pass
-            #-encoding (N>1)
-            echo "$2" | grep -q '^[0-1]$' && turbo=$2
-            isarg $1 "$2" Avi
-            shift
-            ;;
-        -hispeed) #
-            # increase the encoding speed of 25-50% (with -encode n:1:1); the
-            # output video stream will be bigger and can have poor quality; this
-            # option is mainly intented for testing, but it can be used if you
-            #-want to create more quickly an MPEG-4/AVI or a DVD.
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 Avi
-            hispeed=1
-            ;;
-        -bframes) #<0-4>
-            # specify the number of B frames; if -encode is n:3:i the default 2,
-            #-otherwise the default is no B frames; for VCD the default is 2
-            echo "$2" | grep -q '^[0-4]$' && bframes=$2
-            isarg $1 "$2" Avi
-            shift
-            ;;
-        -vcustom) #<libavcodec options>
-            # specify a custom set of video options for libavcodec, use with
-            #--encode n:1:i
-            vcustom=$2
-            isarg $1 "$2" Avi
-            shift
-            ;;
-        -acustom) #<mp3lame options>
-            # specify a custom set of lame options (with -encode 2:m:i) or faac
-            #-options (with -encode 8:m:i)
-            acustom=$2
-            isarg $1 "$2" Avi
-            shift
-            ;;
-        -encsid) #<sid0,sid1,...>
-            #-dump the DVD vobsub, sid is the number you give the -sid option
-            # of MPlayer.
-            encsid=( ${2//,/ } )
-            isarg $1 "$2" subtitle
-            shift
-            ;;
-        -encsdx) #<sid0,sid1,...>
-            # if you dump subtitle 2 and 4 and you want them to have id 0 and 1
-            #-use -encsid 2,4 -encsdx 0,1
-            encsdx=( ${2//,/ } )
-            isarg $1 "$2" subtitle
-            shift
-            ;;
-        -encsla) #<sla0,sla1,...>
-            #-see doc/html/subtitle.html
-            encsla=( ${2//,/ } )
-            isarg $1 "$2" subtitle
-            shift
-            ;;
-        -usespeed) #
-            # do frame rate conversion changing the playback speed; this option
-            # can be used if you are converting from NTSC 24fps, with or without
-            # telecine, to PAL 25fps and viceversa; during normal frame rate
-            # conversion, frames are skipped or duplicated as needed; with this
-            #-option all the frames are encoded
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 mpeg
-            usespeed=1
-            ;;
-        -usesbr) #[1-6|>100]
-            # use the suggested video bitrate to set the output stream size
-            #   1 - for 650MB CD 		4 - for 2 x 650MB CD
-            #   2 - for 700MB CD (default) 	5 - for 2 x 700MB CD
-            #   3 - for 800MB CD 		6 - for 2 x 800MB CD
-            #   n where n > 100 will set the file size to n MB
-            #-with -multiaudio you must to set the streamsize in MB
-            usesbr=2
-            SBR=(650 700 800 "2 x 650" "2 x 700" "2 x 800")
-            echo "$2" | grep -q '^[1-6]$' && usesbr=$2 && shift
-            echo "$2" | grep -qE '^[1-9][0-9]{2,}$' && usesbr=$2 && shift
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 Avi
-            ;;
-        -cpu) #<n>
-            #-number of cpu to use, default all the cpu present in the system
-            cpu=1
-            echo "$2" | grep -q '^[1-8]$' && cpu=$2
-            isarg $1 "$2" Avi
-            shift
-            ;;
-        -interlaced)
-            #-turn on optimization for interlaced source video.
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 $([[ $mpeg ]] && echo mpeg || echo Avi)
-            interlaced=1
-            ;;
-        -slidefps) #<n>
-            # fps to use when creating video from pictures, default is 1; if
-            # there is a audio file associated with a picture, the duration of
-            #-the audio file is used
-            isarg $1 "$2" images
-            slidefps=$(awk -v a=$2 'BEGIN{printf("%.3f",1/a)}')
-            shift
-            ;;
-        -slideaudio) #<audio file>
-            # use the content of <audio file> as audio stream when creating video
-            #-from pictures; it works correctly only if used with mf://singlepic
-            slideaudio=$2
-            if [[ ! -f $2 && $2 != /dev/null ]]; then
-                [[ $2 = doc || $2 = help || ! $2 ]] && isarg $1 "$2" images || ! echo "**ERROR: [$PROGNAME] slide audio file '$2' not found" || exit 1
-            fi
-            shift
-            ;;
-        -norc)
-            #-do not use the settings in the file $HOME/.encode2mpegrc
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2 rc
-            ;;
-        -debug)
-            # make a more verbose log file and creates a debug file; if you are
-            # submitting a bug report, use this option and compress and send the
-            #-log file and the debug file
-            [[ $2 = doc || $2 = help ]] && isarg $1 $2
-            echo "$2" | grep -q '^[0-7]$' && DEBUG=$2 && shift || DEBUG=3
-            ;;
-        (-frames)
-            frames=$2
-            isarg $1 $2
-            shift
-            ;;
-        (-channels)
-            channels=$2
-            isarg $1 $2
-            shift
-            ;;
-        (-srate)
-            MPLAYEROPT=( "${MPLAYEROPT[@]}" -srate $2 -af-adv force=1 )
-            srate=$2
-            isarg $1 $2
-            shift
-            ;;
-        (-endpos)
-            endpos=$2
-            isarg $1 $2
-            shift
-            ;;
-        (-hr-edl-seek)
-            MENCODEROPT=( "${MENCODEROPT[@]}" $1 )
-            ;;
-        (-vf)
-            vf="-vf $2"
-            MPLAYEROPT=( "${MPLAYEROPT[@]}" $vf )
-            isarg $1 $2
-            shift
-            ;;
-        (-af)
-            af="-af $2"
-            isarg $1 $2
-            shift
-            ;;
-        (-dvd-device)
-            dvddev=$2
-            isarg $1 $2
-            shift
-            ;;
-        (mf://*)
-            MPLAYEROPT[${#MPLAYEROPT[*]}]=$1
-            pictsrc=1
-            a=$IFS
-            IFS=,
-            PICTSRC=( ${1#mf://} )
-            IFS=$a
-            srate=48000
-            ;;
-        (-sub)
-            [[ ! -f $2 ]] && echo "**ERROR: [$PROGNAME] subtitle file '$2' not found" && exit 1
-            MPLAYEROPT=( "${MPLAYEROPT[@]}" $1 "$2" )
-            subrender=1
-            shift
-            ;;
-        (-mpeg|-mpegonly|-nosplit) ;;
-        *)
-            if [[ ! $TOOL ]]; then
-                [[ ${1:0:1} = - ]] && ! echo "${MOPT[@]}" | grep -q "\"${1#-}\"" && \
-                  echo -e "Unknown option $1\nIf this is a valid MPlayer option add '-toolopts mplayer' in front of it" && exit 1
-                MPLAYEROPT[${#MPLAYEROPT[*]}]=$1
-            else
-                case $TOOL in
-                    *)
-                        MPLAYEROPT[${#MPLAYEROPT[*]}]=$1
-                        ;;
-                esac
-            fi
-            ;;
-    esac
-    shift
-done
-
-[[ -s ~/.encode2mpegrc && ! $norc ]] && do_log "   INFO: [$PROGNAME] using .encode2mpegrc settings: '$(<~/.encode2mpegrc)'"
-if [[ $subrender || $harddup ]]; then
-    if [[ $vf ]]; then
-        vf=$vf${subrender:+,expand=::::1}
-        [[ $harddup ]] && ! echo $vf | grep -q harddup && vf=$vf,harddup
-        for ((a=0;a<${#MPLAYEROPT[*]};a++)); do
-            [[ ${MPLAYEROPT[a]} = -vf ]] && MPLAYEROPT[a+1]=${vf#-vf }
-        done
-    else
-        vf="-vf ${subrender:+expand=::::1}${harddup:+${subrender:+,}harddup}"
-        MPLAYEROPT=( "${MPLAYEROPT[@]}" $vf )
-    fi
-fi
-
-###############################################################################
-#### debug part
-###############################################################################
-if ((DEBUG)); then
-    if ((DEBUG & 1)); then
-        #### redirect stdout and stderr to the debug file
-    exec 3>&1
-    rm -f "$output".debug.fifo
-    mkfifo "$output".debug.fifo
-    tee "$output".debug <"$output".debug.fifo >&3 &
-    PROCTEE=$!
-    exec &>"$output".debug.fifo
-        trap 'rm "$output".debug.fifo' 0
-    fi
-    if ((DEBUG & 2)); then
-        #### catch mplayer/mencoder errors
-        mplayer () {
-            command mplayer "$@"
-            ret=$? ; (( ret )) && error_line "$FUNCNAME $*" || true
-        }
-        mencoder () {
-            command mencoder "$@"
-            ret=$? ; (( ret )) && error_line "$FUNCNAME $*" || true
-        }
-    fi
-    ((DEBUG & 4)) && set -x
-fi
-
-###############################################################################
-#### ERROR if some options conflict is detected part 1/2
-###############################################################################
-#### mplayer/mencoder
-for a in mplayer mencoder ; do
-    type -f $a &>/dev/null || ! echo "**ERROR: [$PROGNAME] $a missing, install $(echo ${a:0:2} | tr '[:lower:]' '[:upper:]')${a:2}" || exit 1
-done
-#### output stream name check
-[[ ! $output ]] && echo "**ERROR: [$PROGNAME] name of the output stream missing (-o name)" && exit 1
-#### unspecified video norm
-[[ ! $videonorm && step -gt 1 && ! ( $mpeg && ${encode%,*} = ?:0:? && ! $menu ) && ${#TITLESET[*]} -eq 0 ]] && \
-  echo "**ERROR: [$PROGNAME] you must specify a video norm (-n n|p|s)" && exit 1
-#### libfaac check
-if [[ ${encode%,*} = 8:?:? ]]; then
-    ! mencoder -oac help 2>/dev/null | grep -q faac && echo "**ERROR: [$PROGNAME] missing libfaac support in mencoder [-encode 8:m:i]" && exit 1
-fi
-#### mpeg4
-if [[ $vcodec = mpeg4 ]]; then
-    [[ $pictsrc && $step -gt 1 && $mpeg ]] && echo "**ERROR: [$PROGNAME] -vcodec mpeg4, -mpeg and mf://file are not compatible" && exit 1
-fi
-#### pictsrc
-if [[ $pictsrc ]]; then
-    [[ $slideaudio != /dev/null && ${encode%,*} = 0:?:? && $mpeg ]] && \
-      echo "**ERROR: [$PROGNAME] -encode 0:m:i is not compatible with mf:// in MPEG Mode" && exit 1
-    [[ $audioonly ]] && echo "**ERROR: [$PROGNAME] -audioonly does not work with mf://" && exit 1
-fi
-#### -encode 1:m:i is not allowed
-[[ ${encode%,*} = 1:?:? ]] && echo "**ERROR: [$PROGNAME] do not use -encode 1:m:i" && exit 1
-
-###############################################################################
-#### WARN if some options conflict is detected
-###############################################################################
-#### missing toolame support
-if [[ ${encode%,*} = 7:?:? ]]; then
-    if ! mencoder -oac help 2>/dev/null | grep -q t[wo]olame ; then
-        encode=4:${encode#?:}
-        do_log "++ WARN: [$PROGNAME] missing toolame support in mencoder, setting -encode $encode"
-    else
-        mencoder -oac help 2>/dev/null | grep -q toolame && TOOLAME=toolame || TOOLAME=twolame
-    fi
-fi
-
-###############################################################################
-#### set default values for unspecified parameters
-###############################################################################
-if [[ ! $multiaudio ]]; then
-    audiostream=1
-fi
-###############################################################################
-if [[ $encode ]]; then
-    case ${encode%%:*} in
-        0) [[ ! $pictsrc ]] &&
-               AFMT=acopy ;;
-        2|3|5) AFMT=mp3 ;;
-        4|7)   AFMT=mp2 ;;
-        6)     AFMT=ac3 ;;
-        8)     AFMT=aac ;;
-    esac
-    [[ $AFMT ]] && eval : ${audioformat:-\${$AFMT:=copy\}}
-fi
-: ${frameformat:=VCD}
-: ${audioformat:=${AFMT:-mp2}}
-: ${mp1:=mp2enc}
-((${mpegchannels:-2}>2)) && : ${mp2:=musicin} || : ${mp2:=mp2enc}
-: ${mp3:=lame}
-: ${ac3:=mencoder}
-: ${dts:=copy}
-: ${aac:=faac}
-case $audioformat in
-    mp1)
-        case ${mpegchannels:-2} in
-            1) : ${abr:=192} ;;
-            2) : ${abr:=384} ;;
-        esac
-        ;;
-    mp2)
-        case ${mpegchannels:-2} in
-            1) : ${abr:=112} ;;
-            2) : ${abr:=224} ;;
-            [3-6]) : ${abr:=384} ;;
-        esac
-        ;;
-    mp3)
-        case ${mpegchannels:-2} in
-            1) : ${abr:=64} ;;
-            2) : ${abr:=128} ;;
-        esac
-        ;;
-    ac3)
-        case ${mpegchannels:-2} in
-            1) : ${abr:=96} ;;
-            2) : ${abr:=192} ;;
-            3) : ${abr:=320} ;; # to verify
-            4) : ${abr:=384} ;; # to verify
-            5) : ${abr:=448} ;; # to verify
-            6) : ${abr:=448} ;;
-        esac
-        ;;
-    aac) : ${abr:=$((${mpegchannels:-2}*48))} ;;
-    #### mplex fails with asr != 48000 for lpcm
-    lpcm) : ${asr:=48000} ${abr:=$((asr*16*${mpegchannels:-2}/1024))} ;;
-esac
-if [[ ${encode%,*} = 0:?:? && ${!audioformat} = copy ]]; then
-    abr=0
-    if [[ ! $multiaudio ]]; then
-        get_abr
-    fi
-fi
-[[ $mpeg && ${encode%,*} = ?:0:? ]] && \
-  vbr=$(($(id_find ID_VIDEO_BITRATE "${MPLAYEROPT[@]}" ${dvddev:+-dvd-device "$dvddev"} "$@")/1000))
-case $frameformat in
-    DVD) : ${asr:=48000} ;;
-    *)   : ${asr:=44100} ;;
-esac
-case $videonorm in
-    p|s)
-        : ${vfr:=3}
-        ;;
-    n)
-        [[ $frameformat != VCD && ! $vfr && $hispeed -eq 0 && ! $testmca ]] && vfr=1 && telecine=1
-        : ${vfr:=4}
-        ;;
-esac
-[[ $encode && ${encode%,*} != ?:0:? ]] && : ${vfr:=2}
-if [[ ! $ofps ]]; then
-    case $vfr in
-        1) ofps=24000/1001 ;;
-        2) ofps=24 ;;
-        3) ofps=25 ;;
-        4) ofps=30000/1001 ;;
-        5) ofps=30 ;;
-        6) ofps=50 ;;
-        7) ofps=60000/1001 ;;
-        8) ofps=60 ;;
-    esac
-fi
-if [[ $split && $split -eq 0 ]]; then
-    [[ $mpeg ]] && split= || split=800
-fi
-
-###############################################################################
-#### get MPlayer version
-###############################################################################
-mver=$(mencoder 2>/dev/null | awk '$1=="MEncoder"{print $2;exit}')
-
-###############################################################################
-#### threads check
-###############################################################################
-if [[ ! $cpu && -f /proc/cpuinfo ]]; then
-    cpu=$(grep -c ^processor /proc/cpuinfo)
-    #### if there are 2 logical cpu but 1 physical (hyperthreading)
-    #### use only one thread. With kernel 2.4.x it is more efficent.
-    ((cpu==2)) && [[ $(uname -r | cut -f 1-2 -d .) = 2.4 ]] && \
-      [[ $(grep ^siblings /proc/cpuinfo | uniq | wc -l) -eq 1 ]] && \
-      cpu=$((cpu/$(grep ^siblings /proc/cpuinfo | uniq | awk 'END{print $NF}')))
-fi
-((cpu<2)) && cpu=
-
-###############################################################################
-#### -ao pcm arguments
-###############################################################################
-PCMWAV=(pcm:waveheader:fast:file=%$((${#output}+4))%"$output".wav)
-PCMTMP=(pcm:waveheader:fast:file=%$((${#output}+4))%"$output".tmp)
-PCMNOWYUV=(pcm:nowaveheader:fast:file=/dev/fd/4)
-
-[[ $dvddev ]] && MPLAYEROPT=( "${MPLAYEROPT[@]}" -dvd-device "$dvddev" )
-
-###############################################################################
-#### mplayer/mencoder/mjpegtools options
-###############################################################################
-
-#### mencoder output suffix
-if [[ $encode ]]; then
-    [[ $mpeg ]] && SUF=mpeg || SUF=avi
-fi
-
-#### MPLAYERINFO is used for [info]
-MPLAYERINFO=( "${MPLAYEROPT[@]}" )
-
-#### mf:// case
-if [[ $pictsrc ]]; then
-    if [[ $slideaudio && $slideaudio != /dev/null ]]; then
-        [[ $(id_find ID_AUDIO_RATE "$slideaudio") != $asr ]] && SRATE="-srate $asr -af-adv force=1" || SRATE=
-        CLEAN[${#CLEAN[*]}]="$output".wav
-        mplayer "$slideaudio" $SRATE -vo null -vc dummy -ao "${PCMWAV[@]}" $afm ${mpegchannels:+-channels $mpegchannels -af channels=$mpegchannels}
-        MPLAYEROPT=( "${MPLAYEROPT[@]}" -fps 1/$(id_find ID_LENGTH "$output".wav) -audiofile "$output".wav )
-    else
-        if [[ $slideaudio = /dev/null ]]; then
-            MPLAYEROPT=( "${MPLAYEROPT[@]}" -fps $slidefps )
-            encode=0:${encode#?:}
-        else
-            MPLAYEROPT=( "${MPLAYEROPT[@]}" -fps $slidefps -audiofile /dev/zero -audio-demuxer 20 -rawaudio format=0x1:rate=48000 )
-        fi
-    fi
-fi
-
-#### MENCODERARG is used for mencoding, vobsub dumping
-MENCODERARG=( "${MPLAYEROPT[@]}" ${frames:+-frames $frames} )
-
-MENCODERARG=( "${MENCODERARG[@]}" "${MENCODEROPT[@]}" ${endpos:+-endpos $endpos} ${ofps:+-ofps $ofps} )
-if [[ $mpeg && $mpegchannels ]]; then
-    MENCODERARG=( "${MENCODERARG[@]}" -channels $mpegchannels )
-    af=$(echo "${af:--af }${af:+,}" | sed 's/channels=[^,]*,//')channels=$mpegchannels
-elif [[ $channels ]]; then
-    MENCODERARG=( "${MENCODERARG[@]}" -channels $channels )
-    af=$(echo "${af:--af }${af:+,}" | sed 's/channels=[^,]*,//')channels=$channels
-fi
-
-YUVSCALEROPT="-v 1 -n $videonorm ${scale:+-O $frameformat} $YUVSCALEROPT"
-
-MPEG2ENCOPT="${cpu:+-M $cpu }-v 1 -S ${split:-50000} -n $videonorm -F $vfr -s -r 16 ${telecine:+-p} $MPEG2ENCOPT"
-case $vfr in
-    1|2) MPEG2ENCOPT="-g 6 -G ${GOP:-12} $MPEG2ENCOPT" ;;
-    3|6) MPEG2ENCOPT="-g 6 -G ${GOP:-15} $MPEG2ENCOPT" ;;
-    4|5|7|8) MPEG2ENCOPT="-g 9 -G ${GOP:-18} $MPEG2ENCOPT" ;;
-esac
-[[ $frameformat = VCD ]] && MPEG2ENCOPT="-R 2 $MPEG2ENCOPT"
-echo "$MPEG2ENCOPT" | grep -q -e '-K hi-res' && YUVSCALEROPT="-M BICUBIC $YUVSCALEROPT" && \
-  MPEG2ENCOPT="-4 1 -2 1 $MPEG2ENCOPT" || MPEG2ENCOPT="-4 2 -2 1 $MPEG2ENCOPT"
-
-case $frameformat in
-    VCD) MPGRES=${MPGRES:-1} ;;
-    SVCD)
-        case $frameres in
-            1) MPGRES=${MPGRES:-3} ;;
-            2) MPGRES=${MPGRES:-1} ;;
-        esac
-        ;;
-    DVD)
-        case $frameres in
-            1) MPGRES=${MPGRES:-7} ;;
-            2) MPGRES=${MPGRES:-6} ;;
-            3) MPGRES=${MPGRES:-3} ;;
-            4) MPGRES=${MPGRES:-2} ;;
-            5) MPGRES=${MPGRES:-1} ;;
-        esac
-        ;;
-esac
-case $MPGRES in
-    1) H_RES=352 ; [[ $videonorm = n ]] && V_RES=240 || V_RES=288 ;;
-    2) H_RES=352 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
-    3) H_RES=480 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
-    4) H_RES=528 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
-    5) H_RES=544 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
-    6) H_RES=704 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
-    7) H_RES=720 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
-esac
-case $frameformat in
-    VCD)
-        : ${vbr:=1152}
-        MPEG2ENCOPT="-f 2 -b $vbr -V 46 -B $(((abr*audiostream*101875-vbr*2819+3980000)/100000)) $MPEG2ENCOPT"
-        MPLEXOPT="-f 2 -V -b 46 -r $(((abr*audiostream+vbr)*4)) $MPLEXOPT"
-        VCDIMAGEROPT="-t vcd2 $VCDIMAGEROPT"
-        H_STILL=704
-        [[ $videonorm = n ]] && V_STILL=480 || V_STILL=576
-        ((MPGRES!=1)) && YUVSCALEROPT="-O SIZE_${H_RES}x${V_RES} ${YUVSCALEROPT/ -O $frameformat}"
-        MAXBR=1394
-        ;;
-    SVCD)
-        : ${vbr:=2500}
-        MPEG2ENCOPT="-f 5 -b $vbr -V 113 -B $(((abr*audiostream*101250+vbr*742+1665400)/100000)) $MPEG2ENCOPT"
-        MPLEXOPT="-V -b 113 -r $(((abr*audiostream+vbr)*4)) $MPLEXOPT"
-        if [[ $trick ]]; then
-            MPLEXOPT="-f 2 $MPLEXOPT"
-            VCDIMAGEROPT="-t vcd2 $VCDIMAGEROPT"
-        else
-            MPLEXOPT="-f 5 $MPLEXOPT"
-            VCDIMAGEROPT="-t svcd $VCDIMAGEROPT"
-        fi
-        H_STILL=704
-        [[ $videonorm = n ]] && V_STILL=480 || V_STILL=576
-        ((frameres>1||MPGRES!=3)) && YUVSCALEROPT="-O SIZE_${H_RES}x${V_RES} ${YUVSCALEROPT/ -O $frameformat}"
-        MAXBR=2778
-        ;;
-    DVD)
-        : ${vbr:=7500}
-        MPEG2ENCOPT="-f 8 -b $vbr -V 230 -B $(((abr*audiostream*101250+vbr*742+1665400)/100000)) $MPEG2ENCOPT"
-        MPLEXOPT="-f 8 -V -b 230 -r $(((abr*audiostream+vbr)*4)) $MPLEXOPT"
-        H_STILL=720
-        [[ $videonorm = n ]] && V_STILL=480 || V_STILL=576
-        ((frameres>1||MPGRES!=7)) && YUVSCALEROPT="-O SIZE_${H_RES}x${V_RES} ${YUVSCALEROPT/ -O $frameformat}"
-        MAXBR=10080
-        ;;
-esac
-
-###############################################################################
-#### mencoder audio/video/pass options
-###############################################################################
-if [[ $encode ]]; then
-    OPTIONS="-noskiplimit -sws $((hispeed?1:7))"
-    if [[ $mpeg ]]; then
-        # mencoder can put in the MPEG container:
-        # video: mpeg1, mpeg2, mpeg4
-        # audio: mp1, mp2, mp3, ac3, aac (not yet: lpcm, dts)
-        [[ ${encode%,*} != ?:0:? ]] && : ${mpegaspect:=2}
-        #MUX="-mpegopts ${mpegaspect:+vaspect=${ASPECT[mpegaspect]}:}:vbitrate=${vbr}"
-        MUX="-mpegopts "
-        if [[ $telecine ]]; then
-            if [[ $vcodec = mpeg2video || ! $vcodec && $frameformat != VCD ]]; then
-                if [[ $vfr = [12] ]]; then
-                    [[ $videonorm = n ]] && MUX2=":telecine" || MUX2=":film2pal"
-                else
-                    do_log "++ WARN: [$PROGNAME] telecine only works with 24000/1001 or 24 fps, disabling it"
-                fi
-            else
-                do_log "++ WARN: [$PROGNAME] telecine only works for MPEG-2, disabling it"
-            fi
-        fi
-        case $frameformat in
-            VCD)  MUX="${MUX}format=xvcd"  LAVC="vcodec=${vcodec:-mpeg1video}${LAVC:-:vrc_buf_size=327:vrc_minrate=${vbr}:vrc_maxrate=${vbr}}" ;;
-            SVCD) if [[ $trick ]]; then MUX="${MUX}format=xvcd" ; else
-                  MUX="${MUX}format=xsvcd" ; fi ; LAVC="vcodec=${vcodec:-mpeg2video}:vrc_buf_size=917" ;;
-            DVD)  MUX="${MUX}format=dvd"   LAVC="vcodec=${vcodec:-mpeg2video}:vrc_buf_size=1835" ;;
-        esac
-        case $vfr in
-            1|2) LAVC="$LAVC:keyint=$((hispeed?1:${GOP:-12}))" ;;
-            3|6) LAVC="$LAVC:keyint=$((hispeed?1:${GOP:-15}))" ;;
-            4|5|7|8) LAVC="$LAVC:keyint=$((hispeed?1:${GOP:-18}))" ;;
-        esac
-        [[ $frameformat = VCD && ! $bframes ]] && LAVC="$LAVC:vmax_b_frames=2"
-        [[ $mpegmbr ]] && [[ $mpegmbr -lt $vbr ]] && mpegmbr=$vbr
-        #### -a 1 is SAR=1 (do not scale), not DAR=1
-        [[ $mpegaspect != 1 ]] && LAVC="${LAVC}:aspect=${ASPECT[mpegaspect]}"
-        LAVC="${LAVC}${mpegmbr:+:vrc_maxrate=$mpegmbr}${inter_matrix:+:inter_matrix=${inter_matrix}}${intra_matrix:+:intra_matrix=${intra_matrix}}"
-        OF="-of mpeg"
-        NOSKIP=-noskip
-        vbitrate=$vbr
-        if [[ ${encode%,*} != ?:0:? ]]; then
-            for ((a=0;a<${#MENCODERARG[*]};a++)); do
-                while [[ ${MENCODERARG[a]} = -vf ]]; do
-                    unset MENCODERARG[a] MENCODERARG[a+1]
-                    MENCODERARG=( "${MENCODERARG[@]}" )
-                done
-            done
-            MENCODERARG=( "${MENCODERARG[@]}" ${vf:--vf }${vf:+,}${scale:+scale=${H_RES}:${V_RES}${interlaced:+:1},}harddup )
-        fi
-    fi
-
-    BASIC="$LAVC:vbitrate=${vbitrate}${cpu:+:threads=$cpu}${bframes:+:vmax_b_frames=$bframes}"
-    ((hispeed)) && BASIC="$BASIC:vme=0" || BASIC="$BASIC:psnr"
-    [[ $mpeg && $frameformat = VCD ]] || BASIC="$BASIC${interlaced:+:ildct:ilme}"
-    echo "$YUVSCALEROPT" | grep -q -e '-O MONOCHROME' && BASIC="$BASIC:gray"
-
-    HQ="${BASIC}:mbd=2"
-
-    if [[ $mpeg ]]; then
-        #### dia=6 could be added
-        BESTSIZE="${BASIC}:mbd=1:loop:mv0:vlelim=-4:vcelim=7:trell:precmp=1:cmp=1:subcmp=1"
-        [[ ! $bframes ]] && BESTSIZE="$BESTSIZE:vmax_b_frames=2"
-
-        #### last_pred=1-2 could be added
-        BESTQUALITY="${BASIC}:mbd=2:mv0:precmp=6:cmp=6:subcmp=6"
-        [[ $vbitrate -ge 3500 && $frameformat != VCD && $vcodec != mpeg1video ]] && BESTQUALITY="$BESTQUALITY:dc=9"
-    fi
-
-    case $encode in
-        0:?:?|0:?:?,*) AUDIOPASS="-oac copy" ;;
-        1:?:?|1:?:?,*) AUDIOPASS="-oac pcm" ;;
-        2:?:?|2:?:?,*) AUDIOPASS="-oac mp3lame -lameopts ${acustom:-fast}" ;;
-        3:?:?) AUDIOPASS="-oac mp3lame -lameopts preset=standard" ;;
-        4:?:?) AUDIOPASS="-oac lavc -lavcopts acodec=mp2:abitrate=$abr" ;;
-        5:?:?) AUDIOPASS="-oac lavc -lavcopts acodec=mp3:abitrate=$abr" ;;
-        6:?:?) AUDIOPASS="-oac lavc -lavcopts acodec=ac3:abitrate=$abr" ;;
-        7:?:?) AUDIOPASS="-oac $TOOLAME -${TOOLAME}opts br=$abr" ;;
-        8:?:?) AUDIOPASS="-oac faac -faacopts ${acustom:-br=$abr}" ;;
-        3:?:?,*) AUDIOPASS="-oac mp3lame -lameopts preset=${encode#*,}" ;;
-        4:?:?,*) AUDIOPASS="-oac lavc -lavcopts acodec=mp2:abitrate=${encode#*,}" ;;
-        5:?:?,*) AUDIOPASS="-oac lavc -lavcopts acodec=mp3:abitrate=${encode#*,}" ;;
-        6:?:?,*) AUDIOPASS="-oac lavc -lavcopts acodec=ac3:abitrate=${encode#*,}" ;;
-        7:?:?,*) AUDIOPASS="-oac $TOOLAME -${TOOLAME}opts br=${encode#*,}" ;;
-        8:?:?,*) AUDIOPASS="-oac faac -faacopts ${acustom:-br=${encode#*,}}" ;;
-    esac
-    encode=${encode%,*}
-    case $encode in
-        ?:0:?) VIDEOPASS="$OF $MUX -ovc copy $NOSKIP" ; encode=${encode%%:*}:0:1 ; turbo=0 ;; # copy uses only one pass
-        ?:1:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${BASIC}${vcustom:+:$vcustom}" ; : ${turbo:=0} ;;
-        ?:2:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${HQ}"                         ; : ${turbo:=1} ;;
-        ?:3:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${BESTSIZE}"                   ; : ${turbo:=1} ;;
-        ?:4:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${BESTQUALITY}"                ; : ${turbo:=1} ;;
-    esac
-    ((turbo)) && turbo=:turbo || turbo=
-    PASS=${encode##*:}
-    [[ $normalize && $encode != 0:?:? ]] && af=${af:--af }${af:+,}volnorm
-fi
-
-
-###############################################################################
-#### more functions
-###############################################################################
-status_bit () {
-    local a
-    case $1 in
-        avi) bit=0 ;;
-        mpv) bit=1 ;;
-        mpa) bit=2 ;;
-        mpg) bit=3 ;;
-        img) bit=4 ;;
-        sub) bit=5 ;;
-        ach) bit=6 ;;
-        fno) bit=7 ;;
-        ch0) bit=8 ;;
-        sbm) bit=9 ;;
-        spl) bit=10 ;;
-    esac
-    if [[ $2 = set ]]; then
-        skip=$((skip|1<<bit))
-    else
-        return $(((skip&1<<bit) && 1))
-    fi
-}
-###############################################################################
-file_size () { #fsize,fint,ffrac,fpre
-    local -a PRE=([1]=K M G T)
-    local i=0
-    fsize=$(ls -l "$1" | awk '{print $5}')
-    fint=$fsize
-    ffrac=0
-    while ((fint>=1024)) ; do
-        ((fint/1024 < 1024)) && ffrac=$((( fint+=51 )%1024))
-        i=$((++i))
-        fint=$((fint/1024))
-    done
-    ffrac=$((ffrac*10/1024))
-    fpre=${PRE[i]}
-}
-###############################################################################
-show_file_info () {
-    file_size "$2"
-    echo "   $1: $2 is $fsize bytes, $fint.$ffrac ${fpre}B" >>"$output".log
-}
-###############################################################################
-show_finalvideo_info () {
-    local codec TYPE i VIDEO OUT ASPECT CH FAAC SUBST
-    SUBST=
-    VIDEO="$(mplayer -nocache -frames 0 -vo null -nosound "$2" 2>/dev/null | grep "^VIDEO:")"
-    if [[ ! $VIDEO ]]; then
-        # MPEGs with MPEG-4 video do not show all the video informations in one line,
-        # assebmling the informations (kbps is missing):
-        OUT="$(mplayer -nocache -frames 1 -vo null -nosound -v "$2" 2>/dev/null)"
-        if echo "$OUT" | grep -q '^\[V].*fourcc:0x10000004' ; then
-            VIDEO="VIDEO:  MPEG-4  $(echo "$OUT" | awk '$1=="VO:"&&$2=="[null]"{print $3}')"
-            ASPECT=$(echo "$OUT" | awk '$1=="Movie-Aspect"{print $3}')
-            case $ASPECT in
-                undefined) VIDEO="$VIDEO  (aspect 1)" ;;
-                1.33:1) VIDEO="$VIDEO  (aspect 2)" ;;
-                1.78:1) VIDEO="$VIDEO  (aspect 3)" ;;
-                2.21:1) VIDEO="$VIDEO  (aspect 4)" ;;
-                *) VIDEO="$VIDEO  (aspect $ASPECT)" ;;
-            esac
-            VIDEO="$VIDEO  $(echo "$OUT" | awk '$1=="[V]"{print $5}')"
-        fi
-    fi
-    echo "   $1: $VIDEO" >>"$output".log
-    #### removed -vc dummy
-    for i in $(mplayer -vo null -ao null -nocache -frames 1 -v "$2" 2>/dev/null | awk '/==> Found audio str/{print $NF}' | sort -n) ; do
-        echo -n "   $1: AUDIO[$i]: " >>"$output".log
-        codec=$(mplayer -ac mp3, -nocache -frames 0 -v -ao null -vo null "$2" -aid $i 2>/dev/null | \
-          sed '/Selected audio codec:/!d;s/[^(]*(//;s/).*//;s/AAC.*/& AAC/;s/.* //')
-        #### AAC info are insufficient/incorrect
-        if [[ $codec = AAC ]]; then
-            CH=$(mplayer -nocache -frames 0 -v -ao null -vo null "$2" -aid $i 2>/dev/null | awk '/FAAD: Negotiated samplerate:/{print $NF}')
-            if type &>/dev/null faad ; then
-                mplayer -dumpaudio -dumpfile "$output".audio -aid $i "$2" 2>/dev/null
-                FAAC=$(faad -i "$output".audio 2>&1 | tail -2 | head -n 1)
-                #ADTS, 4.087 sec, 103 kbps, 44100 Hz
-                rm -f "$output".audio
-                SUBST="s/AAC.*/AAC:$(echo "$FAAC" | sed 's/.*,\([^,]*Hz\).*/\1/'), "
-                SUBST="${SUBST}$CH ch, $(echo "$FAAC" | sed 's/,.*//'),"
-                SUBST="${SUBST}$(echo "$FAAC" | sed 's/.*,\([^,]*kbps\).*/\1/')"
-                SUBST="${SUBST}/;"
-            else
-                SUBST="s/2 ch,/$CH ch,/;"
-            fi
-        fi
-        mplayer -ac mp3, -nocache -frames 0 -v -ao null -vo null "$2" -aid $i 2>/dev/null | sed '/^Opening audio decode/,/^AUDIO:/!d;s/\r//g' | \
-          grep -e '^AC3:' -e '^MPEG' -e '^AUDIO:' | sed 's/AUDIO/'"$codec"'/;'"$SUBST"'q' >>"$output".log
-    done
-    TYPE=$1
-    shift
-    for i ; do
-        show_file_info "$TYPE" "$i"
-    done
-}
-###############################################################################
-video_duration () {
-    mencoder "$@" -ovc copy -nosound -o /dev/null -quiet 2>&1 | awk '/^Video stream:/{print $10+$10/$12}'
-}
-###############################################################################
-job_exit () {
-    EXIT=$?
-        status_bit mpg || [[ ! -f ${output}.mpg && ! -f ${output}01.mpg ]] || show_finalvideo_info  "MPEG" "${output}"*.mpg
-        [[ $usesbr ]] && ((DEBUG && usesbr>6)) && awk -v u=$usesbr -v f=$fsize \
-          'BEGIN{b=u*1024*1024;printf("--DEBUG: [usesbr] target: %dMB (%d bytes), error: %f%%\n",u,b,(b-f)*100/b)}' >>"$output".log
-    sec=$(($(pr_time)-STARTTIME))
-    echo " JOBEND: $output $(pr_date) ($((sec/3600))h$((sec/60%60))m$((sec%60))s)" >>"$output".log
-    rm -f "${CLEAN[@]}" psnr_??????.log
-    ((DEBUG)) && exec >&1- >&2- && exec >&3
-    if [[ -f $output.yuvscaler.log || -f $output.mpeg2enc.log ]]; then
-        echo
-    else
-        ((!EXIT)) && [[ ! $quiet ]] && cat "$output".log
-    fi
-    ((DEBUG)) && rm -f "$output".debug.fifo && kill $PROCTEE
-}
-###############################################################################
-me_log () {
-    rm -f "$output".fifo
-    mkfifo "$output".fifo
-    tee -a /dev/stderr <"$output".fifo | sed 's/.*\r//' | \
-      awk '/^PSNR:|^M[EP][ln]|^There are |^\[open]|^audio stream:|^number of|^subtitle|^==> |^Recommended video bitrate/{sub(/^/,"   INFO: [mencoder] ");
-        print}' >>"$output".log &
-}
-###############################################################################
-me_bit_log () {
-    rm -f "$output".fifo
-    mkfifo "$output".fifo
-    tee -a /dev/stderr <"$output".fifo | sed 's/.*\r//;/^Recommended video bitrate/!d;s/^/   INFO: [mencoder] /' >>"$output".log &
-}
-###############################################################################
-check_abr () {
-        # abr permitted:
-        # ac3: ( 8000/11025/12000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
-        # ac3: (16000/22050/24000)    16 24 32 40 48 56 64 80 96 112 128     160     192 224 256 288 320
-        # ac3: (32000/44100/48000)          32 40 48 56 64 80 96 112 128     160     192 224 256     320     384     448 512 576 640
-        # mp3: ( 8000/11025/12000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
-        # mp3: (16000/22050/24000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
-        # mp3: (32000/44100/48000)          32 40 48 56 64 80 96 112 128     160     192 224 256     320
-        # mp2: ( 8000/11025/12000)
-        # mp2: (16000/22050/24000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
-        # mp2: (32000/44100/48000)          32    48 56 64 80 96 112 128     160     192 224 256     320     384
-        # mp1: ( 8000/11025/12000)
-        # mp1: (16000/22050/24000)          32    48 56 64 80 96 112 128 144 160 176 192 224 256
-        # mp1: (32000/44100/48000)          32          64    96     128     160     192 224 256 288 320 352 384 416 448
-    case $1 in
-        ac3)
-            case $2 in
-                8000|11025|12000)
-                    case $3 in
-                        8|16|24|32|40|48|56|64|80|96|112|128|144|160) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                16000|22050|24000)
-                    case $3 in
-                        16|24|32|40|48|56|64|80|96|112|128|160|192|224|256|288|320) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                32000|44100|48000)
-                    case $3 in
-                        32|40|48|56|64|80|96|112|128|160|192|224|256|320|384|448|512|576|640) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                *) return 1 ;;
-            esac
-            ;;
-        mp3)
-            case $2 in
-                8000|11025|12000|16000|22050|24000)
-                    case $3 in
-                        8|16|24|32|40|48|56|64|80|96|112|128|144|160) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                32000|44100|48000)
-                    case $3 in
-                        32|40|48|56|64|80|96|112|128|160|192|224|256|320) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                *) return 1 ;;
-            esac
-            ;;
-        mp2)
-            case $2 in
-                16000|22050|24000)
-                    case $3 in
-                        8|16|24|32|40|48|56|64|80|96|112|128|144|160) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                32000|44100|48000)
-                    case $3 in
-                        32|48|56|64|80|96|112|128|160|192|224|256|320|384) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                *) return 1 ;;
-            esac
-            ;;
-        mp1)
-            case $2 in
-                16000|22050|24000)
-                    case $3 in
-                        32|48|56|64|80|96|112|128|144|160|176|192|224|256) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                32000|44100|48000)
-                    case $3 in
-                        32|64|96|128|160|192|224|256|288|320|352|384|416|448) : ;;
-                        *) return 1 ;;
-                    esac
-                    ;;
-                *) return 1 ;;
-            esac
-            ;;
-        *) return 1 ;;
-    esac
-}
-###############################################################################
-debug_line () {
-    echo "--DEBUG: [$PROGNAME] $2($1) $(eval echo $(sed -n $1p "$PROGFILE" | sed 's/ |.*//;s/.>.*//;s/</\\\</'))" >>"$output".log
-}
-###############################################################################
-error_line () {
-    echo "--DEBUG: [$PROGNAME] $1"
-    echo "**ERROR: [$PROGNAME] there has been an error during the execution of the previous line, this should not happen"
-    echo "possible causes:"
-    echo "  0) missing or misspelled input stream"
-    echo "  1) the input stream is corrupted"
-    echo "       -> try a different input stream"
-    echo "  2) one of the options used has triggered a bug present only on your combination of architecture/compiler/distribution"
-    echo "       -> try to recompile MPlayer with a different compiler version or try another distribution"
-    if ((SVN)); then
-        echo "  3) one of the options used is not valid or is buggy for your SVN/unsupported version of MPlayer/MEncoder"
-        echo "       -> check MPlayer's man page and/or try a supported release of MPlayer"
-    fi
-    echo
-    echo "submit a bugreport if you think this is a bug in $PROGNAME"
-    exit $ret
-}
-###############################################################################
-check_mencoder_abr () {
-    local codec lib ASR
-    codec=([4]=mp2 mp3 ac3 mp2 aac)
-    lib=([4]=libavcodec libavcodec libavcodec lib${TOOLAME} libfaac)
-    ASR=${encode%%:*}
-    check_abr ${codec[ASR]} $1 $2 || ! echo "**ERROR: [$PROGNAME] ${lib[ASR]} does not support $2 kbps / $1 Hz for ${codec[ASR]}" || exit 1
-}
-###############################################################################
-is_film2pal () {
-    local a
-    a=$(mplayer -nocache "$@" -vo null -nosound -benchmark -frames 60 -noquiet 2>/dev/null | tr '\015' '\012' | tail | \
-      awk -F/ '$1~/^V:/{s=$1;t=$2}END{match(s,/ [0-9]+$/);n=substr(s,RSTART+1);match(t,/[0-9]+ /);m=substr(t,1,RLENGTH-1);r=n/m;if(r>1.02)print "24"}')
-    [[ $a ]] && a=$(mplayer -nocache "$@" -vo null -nosound -benchmark -frames 1500 -noquiet 2>/dev/null | tr '\015' '\012' | tail | \
-      awk -F/ '$1~/^V:/{s=$1;t=$2}END{match(s,/ [0-9]+$/);n=substr(s,RSTART+1);match(t,/[0-9]+ /);m=substr(t,1,RLENGTH-1);r=n/m;
-      if(r>1.042)print "24000/1001fps";if(r<1.042&&r>1.041)print "24fps"}')
-    echo "$a"
-}
-
-###############################################################################
-#### ERROR if some options conflict is detected part 2/2
-###############################################################################
-#### libavcodec codec/asr/abr
-#### libtoolame asr/abr
-#### libmp3lame asr
-#### no check is done on the other channel in case of multiaudio
-if [[ $encode = [2-8]:?:? ]]; then
-    if [[ $srate ]]; then
-        r=$srate
-    else
-        r=$(id_find ID_AUDIO_RATE "${MPLAYERINFO[@]}")
-        if [[ ! $r ]]; then
-            do_log "++ WARN: [$PROGNAME] failure to detect the audio sample rate of the input stream"
-            [[ ! $multiaudio && ! $audioid ]] && do_log "++ WARN: [$PROGNAME] if your source video does not have audio use -encode 0:${encode#*:}" || \
-              do_log "++ WARN: [$PROGNAME] probably is incorrect the audio stream selected with -${audioid:+aid}${multiaudio:+multiaudio}"
-        fi
-        if [[ $mpeg && ! $usespeed ]]; then
-            case $frameformat in
-                *VCD) ((r != 44100)) && do_log "++ WARN: [$PROGNAME] $frameformat standard requires 44100kHz audio, add -srate 44100" ;;
-                DVD)  ((r != 48000)) && do_log "++ WARN: [$PROGNAME] $frameformat standard requires 48000kHz audio, add -srate 48000" ;;
-            esac
-        fi
-    fi
-    if [[ $encode = [4-7]:?:? ]]; then
-        check_mencoder_abr "$r" ${AUDIOPASS##*=}
-    elif [[ $encode = 8:?:? ]]; then
-        case $r in
-            8000|11025|12000|16000|22050|24000|32000|44100|48000|64000|88200|96000) : ;;
-            *) echo "**ERROR: [$PROGNAME] libfaac does not support $r Hz sample rate" ; exit 1 ;;
-        esac
-    else
-        case $r in
-            8000|11025|12000|16000|22050|24000|32000|44100|48000) : ;;
-            *) echo "**ERROR: [$PROGNAME] libmp3lame does not support $r Hz sample rate" ; exit 1 ;;
-        esac
-    fi
-fi
-#### copy of non-MPEG audio in a VCD
-if [[ $step -gt 1 && $frameformat = VCD && $encode = 0:?:? && ( $mpeg || ${!audioformat} = copy ) && ! $testmca && ! $pictsrc ]]; then
-    a=$(id_find ID_AUDIO_CODEC "${MPLAYERINFO[@]}")
-    [[ $a != mp3 ]] && echo "**ERROR: [$PROGNAME] you cannot copy $a audio in a $frameformat" && exit 1
-fi
-#### mpegchannels > 2 only with ac3 and aac
-[[ $mpeg && ${mpegchannels:-2} -gt 2 && $encode = [2-57]:?:? ]] && CODEC=([2]=mp3 mp3 mp2 mp3 [7]=mp2) && \
-  echo "**ERROR: [$PROGNAME] audio codec ${CODEC[${encode%%:*}]} selected with -encode $encode do not support more than 2 audio channels" && exit 1
-###############################################################################
-#### set cleanup
-###############################################################################
-trap 'job_exit' 0
-CLEAN[${#CLEAN[*]}]="$output".fifo
-
-skip=0
-LG=1
-
-###############################################################################
-#### start the log file
-###############################################################################
-if [[ ! $resume ]] ; then
-    { if [[ $LOG ]]; then
-          echo "$LOG"
-      else
-          STARTTIME=$(pr_time)
-          echo "### LOG: $output $(pr_date)"
-      fi
-      echo -n "   INFO: [$PROGNAME] version $VERSION running in "
-      if ((${#TITLESET[*]})); then
-          echo -n "Titleset Mode"
-      else
-          if [[ $mpeg ]]; then
-              [[ $testmca ]] && echo -n "Testmca Mode" || echo -n "MPEG Mode"
-          fi
-      fi
-      echo "${cpu:+ (cpu=$cpu)}"
-      echo "   INFO: [$PROGNAME] command line: '${CMD[@]}'"
-    } >"$output".log
-fi
-
-###############################################################################
-#### WARNING if some requested tools are missing and can be replaced
-###############################################################################
-#### WARN
-if [[ $WARN ]]; then
-    echo -e "$WARN" >>"$output".log
-fi
-#### volume and audio copy
-if [[ $volume ]]; then
-    [[ $encode = 0:?:? && ( ${!audioformat} = copy || $step -eq 1 || $mpeg ) || ${!audioformat} = copy && ! $encode ]] && \
-      do_log "++ WARN: [$PROGNAME] you cannot modify the volume of the output audio stream if you are making a copy the input audio stream"
-fi
-#### cpu and bframes
-if [[ $cpu && $bframes ]]; then
-    ((bframes)) && do_log "++ WARN: [$PROGNAME] with bframes>0 the encoding will be faster with cpu=1"
-fi
-#### -usespeed
-if [[ $usespeed && ( $encode = 0:?:? || $encode = ?:0:? ) ]]; then
-    do_log "++ WARN: [$PROGNAME] -usespeed may not work if you do not encode both audio and video." && echo -n "Press return to proceed" && read
-fi
-#### total br
-[[ $encode != ?:0:? ]] && ((step>1&&abr*audiostream*1024/1000+vbr>MAXBR)) && \
-  do_log "++ WARN: [$PROGNAME] total video+audio bitrate ($vbr+$((abr*audiostream*1024/1000))kbps) exceed $frameformat specifications (${MAXBR}kbps)"
-#### -slideaudio/single picture
-if [[ $slideaudio && $slideaudio != /dev/null && $pictsrc ]]; then
-    ((${#PICTSRC[*]}!=1||$(ls ${PICTSRC[0]} | wc -l)!=1)) && \
-      do_log "++ WARN: [$PROGNAME] you should use only one source image if you use the option -slideaudio"
-fi
-
-###############################################################################
-#### dump some info in the log file
-###############################################################################
-{ VARS=(frameformat ${split:+split} vfr vbr abr asr ${mpegchannels:+mpegchannels} ${GOP:+GOP} audioformat) # audioformat must be the last
-  VARS[${#VARS[*]}]=${!VARS[${#VARS[*]}-1]}
-  [[ $volume && ! $encode ]] && VARS[${#VARS[*]}]=volume
-  echo -n "   MPEG: "
-  for ((i=0;i<${#VARS[*]};i++)) ; do
-      echo -n "${VARS[i]}:${!VARS[i]} "
-  done
-  echo -n "${multiaudio:+multiaudio:${multiaudio// /,} }"
-  echo -n "mpegencoder:$([ $mpeg ] && echo mencoder || echo mpeg2enc)"
-  [[ $mpegaspect ]] && echo -n " aspect:${ASPECT[mpegaspect]}"
-  [[ $cdi && $frameformat = VCD ]] && echo -n " CD-i"
-  [[ $telecine ]] && echo -n " telecine"
-  echo
-  VARS=(encode ${vcodec:+vcodec} ${volume:+volume} ${usesbr:+usesbr} ${avisplit:+avisplit} ${channels:+channels} AUDIOPASS VIDEOPASS PASS)
-  if [[ $encode ]]; then
-      echo -n "   $([ $mpeg ] && echo MPEG || echo \ AVI): "
-      for ((i=0;i<${#VARS[*]};i++)) ; do
-          echo -n "${VARS[i]}:${!VARS[i]} "
-      done
-      if ((PASS>1)); then
-          [[ $turbo ]] && echo -n "TURBO:on " || echo -n "TURBO:off "
-      fi
-      txt=
-      [[ $(echo $encode | cut -f 2 -d:) = 1 && $vcustom ]] && txt="libavcodec"
-      [[ ${encode%%:*} = 2 && $acustom ]] && txt=${txt:+${txt} and} && txt="$txt lame"
-      txt=${txt:+(custom ${txt} options)}
-      echo $txt
-  fi
-  [[ ! $resume ]] && { [[ $audioonly ]] && mp_identify "$audioonly" || mp_identify "${MPLAYERINFO[@]}" -frames 1 ; } | \
-    sed -n '/^ID_/s/^/   INFO: [identify] /p' | uniq
-  VARS=(${encode:+MENCODERARG} MPLAYERYUVOPT)
-  VARS=(${encode:+MENCODERARG})
-  for ((i=0;i<${#VARS[*]};i++)) ; do
-      s="INFO: \[${VARS[i]}] \${${VARS[i]}[*]}"
-      eval echo "\ \ \ $s"
-  done
-} >>"$output".log
-h_res=$(grep ID_VIDEO_WIDTH "$output".log | tail -1 | cut -f2 -d=)
-v_res=$(grep ID_VIDEO_HEIGHT "$output".log | tail -1 | cut -f2 -d=)
-if [[ $pictsrc ]]; then
-    v_res=$(mplayer -vo null "${MPLAYERINFO[@]}" -frames 1 2>/dev/null | awk '/^VO:/{print $3}' | head -n 1)
-    h_res=${v_res%x*}
-    v_res=${v_res#*x}
-fi
-[[ $mpeg && ${encode%,*} = ?:0:? ]] && H_RES=$h_res && V_RES=$v_res
-
-###############################################################################
-#### put the volume in DB
-###############################################################################
-if [[ $volume ]]; then
-    volume=$(awk -v a=$volume 'BEGIN{if(a>0) print 20*log(a)/log(10) ; else print 0}')
-    af=${af:--af }${af:+,}volume=$volume
-fi
-
-[[ ${mver:0:5} = 1.0rc ]] || SVN=1
-
-###############################################################################
-#### telecined (NTSC/PAL) MPEG copy/speed encoding change
-###############################################################################
-if [[ $mpeg && ( $encode = ?:0:? || $usespeed ) || $usespeed && ! $encode && $step -gt 1 ]]; then
-    FPS=($(grep ID_VIDEO_FPS "$output".log | cut -f2 -d=) [1]=23.976 24.000 25.000 29.970 30.000 50.000 59.940 60.000)
-    for ((i=1;i<9;i++)); do
-        a=$(awk -v a=${FPS[0]} -v b=${FPS[i]} 'BEGIN{if (sqrt((a-b)*(a-b))<.02) print b}')
-        if [[ $a ]]; then
-            if [[ ${FPS[0]} != ${FPS[i]} ]]; then
-                do_log "++ WARN: [$PROGNAME] input video frame rate is not exactly ${FPS[i]}fps"
-                FPS[0]=${FPS[i]}
-            fi
-            FPS[10]=$i
-            break
-        fi
-    done
-    [[ $usespeed && $i -eq 9 ]] && do_log "++ WARN: [$PROGNAME] input video frame rate is not a valid NTSC/PAL value; disabling -usespeed" && usespeed=
-
-    if [[ ${FPS[0]} = ${FPS[4]} || ${FPS[0]} = ${FPS[5]} ]]; then
-        FPS[9]=$(mplayer -nocache -quiet "${MPLAYERINFO[@]}" -vo null -nosound -benchmark -frames 60 2>/dev/null | awk '/^demux_mpg:/{print $2}')
-        [[ ${FPS[9]} = 24fps || ${FPS[9]} = 24000/1001fps ]] && FPS[10]=$((FPS[10]-3))
-    elif [[ ${FPS[0]} = ${FPS[3]} ]]; then
-        FPS[9]=$(is_film2pal "${MPLAYERINFO[@]}")
-        if [[ ${FPS[9]} ]]; then
-            [[ ${FPS[9]} = 24fps ]] && FPS[10]=2 || FPS[10]=1
-        fi
-    fi
-    if [[ $usespeed ]]; then
-        if ((vfr!=${FPS[10]})); then
-            NSPEEDCOEF=([1]=1001 1001 5 1001 1001 5 1001 25 1250 5 25 2500 5 1200 6 2 2400 12 1001 1001 2 1001 5 2000 2 1200 6 1001 )
-            MSPEEDCOEF=([1]=1000  960 4  800  480 2  400 24 1001 4 12 1001 2 1001 5 1 1001  5 1000  200 1  500 3 1001 1 1001 5 1000 )
-            DCOEF=([1]=-2 3 7 10 12 13 13)
-            if ((vfr>${FPS[10]})); then
-                #### black magic here ;-)
-                n=$((vfr+${FPS[10]}+${DCOEF[${FPS[10]}]}))
-                a=${NSPEEDCOEF[n]}/${MSPEEDCOEF[n]}
-            else
-                n=$((vfr+${FPS[10]}+${DCOEF[vfr]}))
-                a=${MSPEEDCOEF[n]}/${NSPEEDCOEF[n]}
-            fi
-            MENCODERARG=( -speed $a -srate $asr -af-adv force=1 "${MENCODERARG[@]}" )
-            MPLAYERYUVOPT=("${MPLAYERYUVOPT[@]}" -speed $a )
-            do_log "   INFO: [usespeed] using speed factor $a"
-        fi
-    elif [[ ${FPS[0]} = ${FPS[4]} || ${FPS[0]} = ${FPS[5]} || ${FPS[0]} = ${FPS[3]} ]]; then
-        if [[ ${FPS[9]} = 24fps || ${FPS[9]} = 24000/1001fps || $telesrc ]]; then
-            { echo -n "   INFO: [$PROGNAME] "
-              [[ ${FPS[9]} = 24fps || ${FPS[9]} = 24000/1001fps ]] && echo -n "detected" || echo -n "user selected"
-              [[ ${FPS[0]} = ${FPS[3]} ]] && echo -n " PAL" || echo -n " NTSC"
-              echo " telecined source"
-            } | tee -a "$output".log
-            [[ ${FPS[10]} = 1 ]] && MENCODERARG=( "${MENCODERARG[@]}" -ofps 24000/1001 -mc 0 ) || MENCODERARG=( "${MENCODERARG[@]}" -ofps 24 -mc 0 )
-        fi
-    fi
-fi
-
-###############################################################################
-#### scale and expand/crop to adapt the aspect ratio
-#### added rotation and overscan
-###############################################################################
-if [[ $mpegfixaspect && $step -gt 1 ]]; then
-    a=$(get_aspect "${MPLAYERINFO[@]}")
-    [[ ${a:0:9} = undefined ]] && a=$(awk -v a=$h_res -v b=$v_res 'BEGIN{printf("%f",a/b)}')
-    [[ $mpegaspect = 1 ]] && b=$(awk -v a=$H_RES -v b=$V_RES 'BEGIN{printf("%f",a/b)}') || b=${ASPECT[${mpegaspect:-2}]}
-    vfilter=$(awk -v a=$a -v A=$b -v W=$H_RES -v H=$V_RES -v crop=$mpegfixaspect -v i=${interlaced:-0} -v r=$rotate -v o=$overscan -v logfile="$(echo "$output" | sed 's/\\/\\\\/g')".log 'BEGIN{
-      ko=(1-o/100)
-      if(a==1.78||a==1.74)a=16/9
-      if(a==1.33||a==1.30)a=4/3
-      if(A=="4/3")A=4/3
-      if(A=="16/9")A=16/9
-      if(r!=""){
-        A=1/A
-        tmp=W
-        W=H
-        H=tmp
-      }
-      if(a>A&&crop==0||a<A&&crop==1){
-        Eh=A*H/a
-        Ew=W
-      }else{
-        Ew=W*a/A
-        Eh=H
-      }
-      Ew=2*int(Ew*ko/2+0.50)
-      Eh=2*int(Eh*ko/2+0.50)
-      printf("-vf scale=%d:%d",Ew,Eh)
-      printf("   INFO: [mpegfixaspect] -vf scale=%d:%d",Ew,Eh) >>logfile
-      if(i==1)printf(":1")
-      if(i==1)printf(":1") >>logfile
-      if(crop==0){
-        printf(",expand=%d:%d",W,H)
-        printf(",expand=%d:%d",W,H) >>logfile
-      }else{
-        printf(",crop=%d:%d",W,H)
-        printf(",crop=%d:%d",W,H) >>logfile
-      }
-      if(r!=""){
-        printf(",rotate=%d",r)
-        printf(",rotate=%d",r) >>logfile
-      }
-      if(o!=0) printf(" [overscan=%d]",o) >>logfile
-      printf("\n") >>logfile
-    }')
-    if [[ $mpeg ]]; then
-        for ((a=0;a<${#MENCODERARG[*]};a++)); do
-            if [[ ${MENCODERARG[a]} = -vf ]]; then
-                MENCODERARG[a+1]=$(echo ${MENCODERARG[a+1]} | sed 's/scale=[^,]*,//;s/^/'"${vfilter#-vf }"',/')
-            fi
-        done
-    fi
-fi
-
-###############################################################################
-#### warn for aspect ratio
-###############################################################################
-if [[ ( $mpeg && $encode != ?:0:? || ! $mpeg && $step -gt 1 ) && ! $mpegfixaspect && ${#TITLESET[*]} -eq 0 && ! $testmca ]]; then
-    a=$(get_aspect "${MPLAYERINFO[@]}")
-    [[ ${mpegaspect:-2} = 2 && $a != 1.33 && $a != 1.30 || ${mpegaspect:-2} = 3 && $a != 1.78 && $a != 1.74 || ${mpegaspect:-2} = 4 && $a != 2.21 ]] && \
-      do_log "++ WARN: [$PROGNAME] selected aspect ratio [${ASPECT[${mpegaspect:-2}]}] and source aspect ratio [$a] are different"
-fi
-
-###############################################################################
-#### dvd vobsub
-###############################################################################
-#### function to select the vobsub to extract
-next_vobsub_idx () {
-    if ((${#SID[*]})); then
-        if ((idx < ${#encsid[*]})); then
-            SID=(-sid ${encsid[idx]} -vobsuboutindex ${encsdx[idx]} ${encsla:+-vobsuboutid ${encsla[idx]}} -vobsubout "$output")
-            do_log "   INFO: [$PROGNAME] dumping subtitle ${encsid[idx]} to vobsub ${encsdx[idx]}${encsla:+ (${encsla[idx]})}"
-            idx=$((idx+1))
-        else
-            unset SID
-        fi
-    fi
-}
-#### turn on vobsub extraction if encsid is given
-if (( ${#encsid[*]} )) ; then
-    (( ${#encsdx[*]} )) || encsdx=( ${encsid[*]} )
-    idx=0
-    SID=(0000)
-    next_vobsub_idx
-else
-    unset SID
-fi
-status_bit sub || unset SID
-
-###############################################################################
-#### test condition "extra"
-###############################################################################
-IDACOD=$(grep "ID_AUDIO_CODEC" "$output".log | tail -1 | cut -f2 -d=)
-[[ $IDACOD = hwdts ]] && echo "**ERROR: [$PROGNAME] dts audio support missing in MPlayer" && \
-  echo "**ERROR: add dts support (libdts-0.0.2.tar.gz) or select a non dts stream" && \
-  echo "**ERROR: example:  -aid 128 (ac3), -aid 160 (lpcm), -aid 0 (mpeg)" && exit 1
-[[ $mpeg && ! $pictsrc && ( $encode = 1:?:? || $multiaudio || $encode = 0:?:? && $IDACOD != mp3 && $IDACOD != a52 && $IDACOD != faad ) ]] && extra=1 || \
-  extra=
-[[ $extra ]] && do_log "**ERROR: [$PROGNAME] output stream: unsupported audio codec $IDACOD" && exit 1
-
-CLEAN[${#CLEAN[*]}]="$output".tmp
-
-###############################################################################
-#### AVI/MPEG section
-###############################################################################
-if [[ $encode ]]; then
-    if status_bit avi ; then
-        find_sbr () {
-            local kv k ka
-            sleep 2
-            [[ $mpeg ]] && kv=9888 k=33 ka=1015 || kv=10000 k=0 ka=1011
-            if ((usesbr<=6)); then
-                sbr=$(awk '/for '"${SBR[usesbr-1]}"'MB CD/{print $NF}' <"$output".log)
-                [[ $sbr ]] && ((sbr<vbitrate)) && VIDEOPASS=${VIDEOPASS/vbitrate=$vbitrate:/vbitrate=$sbr:} && \
-                  do_log "   INFO: [mencoder] using vbitrate=$sbr"
-            else
-                #### usesbr is in MB
-                #### remind: 650-800,650-1400,800-1400
-                sbr[0]=650
-                sbr[1]=1400
-                sbr[2]=$(awk '/for '"${SBR[0]}"'MB CD/{print $NF}' <"$output".log)
-                sbr[3]=$(awk '/for '"${SBR[4]}"'MB CD/{print $NF}' <"$output".log)
-                [[ ${sbr[2]} && ${sbr[3]} ]] && \
-                  sbr[4]=$(((((usesbr*kv/10000-k)-(audiosize*ka/1000))*(sbr[3]-sbr[2])+sbr[1]*sbr[2]-sbr[0]*sbr[3])/(sbr[1]-sbr[0])))
-                [[ ${sbr[4]} ]] && ((sbr[4]<vbitrate && sbr[4]>0)) && VIDEOPASS=${VIDEOPASS/vbitrate=$vbitrate:/vbitrate=${sbr[4]}:} && \
-                  do_log "   INFO: [mencoder] using vbitrate=${sbr[4]}"
-            fi
-        }
-        AID=
-        if [[ ! $extra ]]; then
-            RAWVIDEO=( -o "$output".$SUF )
-        fi
-        #### start mencoder
-        PLOG=( -passlogfile "$output".avi2pass.log )
-        MSG=( -msglevel open=6:demuxer=6:demux=6 )
-        rm -f frameno.avi
-        [[ $encode = 0:?:? && ! $extra ]] && F= || F=$af
-            if [[ $usesbr && ! $extra ]]; then
-            ((DEBUG)) && debug_line $((LINENO+2)) "usesbr "
-            me_bit_log
-            mencoder         $OPTIONS -ovc frameno         -o /dev/null       "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F       &>"$output".fifo
-                find_sbr
-                next_vobsub_idx
-            fi
-        if ((PASS==1)); then
-            ((DEBUG)) && debug_line $((LINENO+2)) "PASS 1/$PASS"
-            me_log
-            mencoder         $OPTIONS $VIDEOPASS           "${RAWVIDEO[@]}"   "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${MSG[@]}" >"$output".fifo
-            next_vobsub_idx
-        else
-            #### N pass
-            CLEAN[${#CLEAN[*]}]="$output".avi2pass.log
-            ((DEBUG)) && debug_line $((LINENO+1)) "PASS 1/$PASS"
-            mencoder         $OPTIONS ${VIDEOPASS}:vpass=1$turbo -o /dev/null "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}"
-            next_vobsub_idx
-            if ((PASS==2)); then
-                ((DEBUG)) && debug_line $((LINENO+2)) "PASS 2/$PASS"
-                me_log
-                mencoder     $OPTIONS ${VIDEOPASS}:vpass=2 "${RAWVIDEO[@]}"   "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}" "${MSG[@]}" \
-                  >"$output".fifo
-                next_vobsub_idx
-            else
-                for ((a=2;a<PASS;a++)); do
-                    ((DEBUG)) && debug_line $((LINENO+1)) "PASS $a/$PASS"
-                    mencoder $OPTIONS ${VIDEOPASS}:vpass=3 -o /dev/null       "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}"
-                    next_vobsub_idx
-                done
-                ((DEBUG)) && debug_line $((LINENO+2)) "PASS $PASS/$PASS"
-                me_log
-                mencoder     $OPTIONS ${VIDEOPASS}:vpass=3 "${RAWVIDEO[@]}"   "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}" "${MSG[@]}" \
-                  >"$output".fifo
-                next_vobsub_idx
-            fi
-        fi
-        status_bit avi set
-    fi
-fi
-
-###############################################################################
-#### if there are still vobsub to dump, do it now
-###############################################################################
-while ((${#SID[*]})) ; do
-    ((DEBUG)) && debug_line $((LINENO+1)) vobsub
-    mencoder -ovc copy -o /dev/null $AID "${SID[@]}" "${MENCODERARG[@]}" -nosound
-    next_vobsub_idx
-done
-if status_bit sub ; then
-    if [[ -f $output.sub && -f $output.idx && ${#encsid[*]} -gt 0 ]]; then
-        #### reset the subtitles with the wrong timestamp
-        awk -v logfile="$(echo "$output" | sed 's/\\/\\\\/g')".log '{
-          if($1=="id:")id=" ("$0")"
-          if($1=="timestamp:"){
-            n=$2;
-            sub(/,/,"",n);
-            # convert the timestamp in seconds
-            m=3600*substr(n,1,index(n,":")-1);
-            sub(/[0-9]*:/,"",n);
-            m=m+60*substr(n,1,index(n,":")-1);
-            sub(/[0-9]*:/,"",n);
-            m=m+substr(n,1,index(n,":")-1);
-            sub(/[0-9]*:/,"",n);
-            m=m+n/1000;
-            # .002 is already ok
-            if(m+.004<t){
-              printf("++ WARN: [encsid] reset bad timestamp sequence: %s %s%s\n",gensub(/[^ ]* /,"",1,gensub(/,.*/,"",1,p)),substr($2,1,length($2)-1),id) >>logfile ;
-              id="";
-              p=gensub(/ [^ ]* /," 00:00:00:000, ",1,p)" #"p}
-            t=m}
-          else t=0;
-          if(NR>1)print p;
-          p=$0
-          }
-          END{print p}' <"$output".idx >"$output".idx.idx && mv "$output".idx.idx "$output".idx
-        status_bit sub set
-    fi
-fi
-
-###############################################################################
-#### if fast mode skip multiplexing
-###############################################################################
-if [[ $mpeg && $fast ]]; then
-    if status_bit mpg ; then
-        if [[ ! $extra ]]; then
-            rm -f "$output".mpg "${output}"[0-9][0-9].mpg
-            status_bit mpv set
-            status_bit mpa set
-            status_bit mpg set
-            mv "$output".$SUF "$output".mpg
-        fi
-    fi
-fi
-
-###############################################################################
-#### split the MPEG stream (for MPEG Mode)
-###############################################################################
-if status_bit spl ; then
-    #### split for MPEG Mode (MPEG-4 codec not supported)
-    #### MEncoder does not support split as does mpeg2enc/mplex
-    #### this solution is slow, but it seems quite accurate
-    if [[ $mpeg && $split && $vcodec != mpeg4 ]]; then
-        [[ ! $fast ]] && mv "$output"01.mpg "$output".mpg
-        file_size "$output".mpg
-        if ((split*1024*1024<fsize)); then
-            chunks=$((fsize/(split*1024*1024)+1))
-            CLEAN[${#CLEAN[*]}]="$output".framelist
-            mplayer "$output".mpg -vf framestep=I -vo null -nosound -benchmark 2>/dev/null | tr '\015' '\012' | \
-              awk '{if($1=="I!")print t,substr(f,1,index(f,"/")-1);t=$2;f=$3}' >"$output".framelist
-            m=0
-            #### removed -vc dummy
-            [[ $multiaudio ]] && a=$(mplayer -vo null -ao null -frames 1 -v "$output".mpg 2>/dev/null | awk '/==> Found audio str/{print $NF}' | \
-              sort -n | tr '\012' ',' | sed 's/,$/\n/')
-            for ((i=0;i<chunks;i++)); do
-                if ((i<chunks-1)); then
-                    n=$(mplayer "$output".mpg  -vf framestep=I -vo null -nosound -benchmark 2>/dev/null -sb $(((i+1)*split*1024*1024)) -frames 30 | \
-                      tr '\015' '\012' | awk '{if($1=="I!"){print t;exit};t=$2}')
-                    n=$(awk '/^'"$n"'/{print $2-1;exit}' <"$output".framelist) #should be -2
-                else
-                    n=
-                fi
-                ((DEBUG)) && debug_line $((LINENO+1)) "mpeg_split $((i+1))/$chunks"
-                "$PROGFILE" -norc "$output".mpg -o "$output"$(printf "%02d" $((i+1))) -mpegonly -mpeg -encode 0:0:1 -$(echo $frameformat| tr '[:upper:]' '[:lower:]') -nosplit -noshowlog -sb $((i*split*1024*1024)) ${n:+-frames $((n-m))} -a ${mpegaspect:-2} ${multiaudio:+-multiaudio $a} -mc 0
-                rm "$output"$(printf "%02d" $((i+1))).log
-                m=$n
-            done
-            rm "$output".mpg
-        else
-            mv "$output".mpg "$output"01.mpg
-        fi
-        status_bit spl set
-    fi
-fi
-
-################################################################################
-#### done
-################################################################################
-exit
-
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TOOLS/encode2mpeglight.sh	Mon Jul 07 09:30:22 2008 +0000
@@ -0,0 +1,2000 @@
+#!/bin/bash
+#
+# Version:          0.6.3
+#
+# Licence:          GPL
+#
+# 2004-05-22        Giacomo Comes <encode2mpeg at users.sourceforge.net>
+# 2006-11-06                      <encode2mpeg at email.it>
+#
+# Purpose:          Convert anything MPlayer can play to AVI/VCD/SVCD/DVD MPEG
+#
+#   encode2mpeglight.sh is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License.
+
+#   encode2mpeglight.sh is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with encode2mpeglight.sh; if not, write to the Free Software
+#   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+###############################################################################
+#   encode2mpeglight.sh is a program that can create VCD/SVCD/DVD MPEGs
+#   and eventually extract VobSub subtitles from a DVD using only
+#   MEncoder/MPlayer.
+#
+#   encode2mpeglight.sh is a stripped release of encode2mpeg and therefore the
+#   code is redundant in several places, with many variables defined and
+#   used for no apparent reason. This cannot be avoided easily.
+#   A command line like:
+#     encode2mpeglight.sh <encode2mpeglight.sh options>
+#   will produce almost the same results as:
+#     encode2mpeg -mpeg -mpegonly <encode2mpeglight.sh options>
+#
+#   If you need more features like:
+#     - two or more audio streams, chapters, subtitles, menu
+#     - creation, burn and verification of the disk image
+#     - creation of MPEG-4 avi and subtitles for a hardware player
+#   and more, consider to use the full release (http://encode2mpeg.sf.net)
+#
+#   encode2mpeglight.sh is mainly tested with the stable release of MPlayer,
+#   I try to make it work with SVN too, but due to the "unstable" nature of
+#   SVN, bugs may suddenly appear. If you find any, please report them to me.
+###############################################################################
+
+###############################################################################
+#### start
+###############################################################################
+export LC_ALL=POSIX
+set -B +f
+shopt -u xpg_echo nullglob
+PROGNAME=${0##*/}
+PROGFILE=$(type -p "$0")
+VERSION=$(awk '$2=="Version:"{print $3;exit}' <"$PROGFILE")
+BROWSER=
+
+###############################################################################
+#### some functions
+###############################################################################
+OptionsText () {
+    echo
+    echo "Arguments enclosed in [ ] are optional"
+}
+###############################################################################
+ModeText () {
+    echo
+    echo "$PROGNAME defaults to encode2mpeg's MPEG Mode, the other modes are not"
+    echo "available."
+}
+###############################################################################
+usage () {
+    echo -e "Usage: $PROGNAME options source\nOptions:"
+    sed -n '/^#### PARSING/,/^done/!d;/^done/q;/^[ 	]*-[^)]*)/,/#-/!d;s/)$//;s/) *#/ /;s/#-/# /;s/	*#L.$//;s/#//;p' "$PROGFILE"
+    ModeText
+    OptionsText
+}
+###############################################################################
+shortusage () {
+    echo -e "\n$PROGNAME  v. $VERSION  Copyright (C) 2004-2006 Giacomo Comes\n"
+    echo "This is free software; see the source for copying conditions.  There is NO"
+    echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE,"
+    echo "to the extent permitted by law."
+    echo
+    echo "Usage: $PROGNAME options source"
+    echo "Options:"
+    sed -n '/^#### PARSING/,/^done/!d;/^done/q;/^[ 	]*-[^)]*)/!d;s/)$//;s/) *#/ /;s/	*#L.$//;p' "$PROGFILE"
+    OptionsText
+}
+###############################################################################
+mp_identify () {
+    mplayer -msglevel identify=6 -vo md5sum:outfile=/dev/null -ao null -nocache -frames 0 "$@" 2>/dev/null
+}
+###############################################################################
+id_find () {
+    local ID=$1
+    shift
+    mp_identify "$@" | awk -v id=$ID -F= '$1==id{t=$2}END{print t}'
+}
+###############################################################################
+get_aspect () {
+    mplayer -vc -mpegpes, -vo null -ao null -nocache -frames 4 "$@" 2>/dev/null | sed '/^Movie-Aspect is/!d;s/.*Movie-Aspect is //;s/:.*//'
+}
+###############################################################################
+mlistopt () {
+    mplayer -list-options 2>&1 | awk '$1=="Name"{m=1}{if(m&&$1!="Name"&&$1!=""&&$1!="Total:")print "\""$1"\""}'
+}
+###############################################################################
+do_log () {
+    echo "$1"
+    ((LG)) && echo "$1" >>"$output".log || WARN="$WARN${WARN:+\n}$1"
+}
+###############################################################################
+isarg () {
+    if [[ ${2:0:1} = - || ! $2 || $2 = help ]]; then
+        [[ ${2:0:1} = - ]] && echo "**ERROR: [$PROGNAME] invalid argument '$2' for option '$1'"
+        [[ ! $2 ]] && echo "**ERROR: [$PROGNAME] invalid null argument for option '$1'"
+        "$PROGFILE" -norc -l | sed '/^        '$1'$/,/^        -/!d' | sed '$d'
+        "$PROGFILE" -norc -l | sed '/^        '$1'[ |]/,/^        -/!d' | sed '$d'
+        exit 1
+    fi
+    if [[ $2 = doc ]]; then
+        show_html ${3:+$3.html}
+        exit
+    fi
+}
+###############################################################################
+pr_date () {
+    echo "[$(date '+%Y-%m-%d %H:%M:%S')]"
+}
+###############################################################################
+pr_time () {
+    date '+%j %H %M %S' | awk '{print $1*86400+$2*3600+$3*60+$4}'
+}
+###############################################################################
+get_abr () {
+    local INFO ABR
+    INFO=$(mp_identify "${MPLAYEROPT[@]}" ${dvddev:+-dvd-device "$dvddev"} "$@" | grep '^ID_')
+    ABR=$(echo "$INFO" | grep '^ID_AUDIO_BITRATE' | tail -1 | cut -f2 -d=)
+    case $(echo "$INFO" | grep '^ID_AUDIO_CODEC' | cut -f2 -d=) in
+        dvdpcm) abr=$((abr+ABR/1024)) ;;
+        *)      abr=$((abr+ABR/1000)) ;;
+    esac
+}
+###############################################################################
+get_pwd () {
+    pushd &>/dev/null "$1"
+    echo "$PWD/$2"
+    popd &>/dev/null
+}
+###############################################################################
+show_html () {
+    local i LIST HTML PREFIX OPTION INSTDOCDIR SRCDOCDIR
+    INSTDOCDIR=${PROGFILE%/bin/$PROGNAME}/share/doc/encode2mpeg
+    SRCDOCDIR=${PROGFILE%/$PROGNAME}/doc
+    if [[ -f $INSTDOCDIR/encode2mpeg.html ]]; then
+        HTML=$(get_pwd "$INSTDOCDIR" encode2mpeg.html)
+    elif [[ -f $SRCDOCDIR/encode2mpeg.html ]]; then
+        HTML=$(get_pwd "$SRCDOCDIR" encode2mpeg.html)
+    else
+        HTML="http://encode2mpeg.sourceforge.net"
+    fi
+    if [[ -f $INSTDOCDIR/html/$1 ]]; then
+        HTML=$(get_pwd "$INSTDOCDIR/html" $1)
+    elif [[ -f $SRCDOCDIR/html/$1 ]]; then
+        HTML=$(get_pwd "$SRCDOCDIR/html" $1)
+    elif [[ $1 && ! -d $INSTDOCDIR/html && ! -d $SRCDOCDIR/html ]]; then
+        HTML="http://encode2mpeg.sourceforge.net/html/$1"
+    fi
+    LIST=(mozilla seamonkey firefox)
+    [[ ${HTML:0:1} = / ]] && PREFIX=file:// || PREFIX=
+    for ((i=0;i<${#LIST[*]};i++)); do
+        type ${LIST[i]} &>/dev/null && ${LIST[i]} -remote 'openURL('"$PREFIX$HTML"',new-tab)' 2>/dev/null && return
+    done
+    LIST=(mozilla firefox seamonkey opera konqueror epiphany galeon)
+    if [[ $BROWSER ]]; then
+        type "$BROWSER" &>/dev/null && LIST=("$BROWSER") || echo "++ WARN: default browser '$BROWSER' not found, using builtin browser list"
+    fi
+    for ((i=0;i<${#LIST[*]};i++)); do
+        if type "${LIST[i]}" &>/dev/null; then
+            case ${LIST[i]} in
+                opera) OPTION=--newpage ;;
+                epiphany|galeon) OPTION=--new-tab ;;
+                *) OPTION= ;;
+            esac
+            "${LIST[i]}" $OPTION "$HTML" &
+            return
+        fi
+    done
+}
+
+###############################################################################
+#### variable initialization
+###############################################################################
+abr=;asr=;vbr=;vfr=;videonorm=;frameformat=;output=;audioformat=;mp1=;mp2=;mp3=;ac3=;dts=;lpcm=;aac=;normalize=;volume=;multiaudio=;mpegchannels=;quiet=;resume=;blank=;encode=;ofps=;mono=;usesbr=;sbr=;clear=;keep=;frames=;avisplit=;channels=;vcustom=;acustom=;cpu=;interlaced=;mpegaspect=;intra_matrix=;inter_matrix=;fixavi=;mpeg=;crop=;audioid=;dvdaudiolang=;bframes=;firstchap=;lastchap=;dvdtrack=;addchapter=;cdi=;mpegfixaspect=;nowait=;vf=;frameres=;trick=;autocrop=;afm=;cache=;removecache=;turbo=;dvddev=;srate=;endpos=;fourcc=;menu=;menubg=;dvdtitle=;rotate=;menuvtsbg=;autosync=;telecine=;AFMT=;telesrc=;vcodec=;vrfyumnt=;burniso=;verify=;fixasync=;removedir=;MPGRES=;GOP=;TXTSUBOPT=;usespeed=;testmca=;chconf=;noodml=;pictsrc=;slideaudio=;audioonly=;norc=;rawsub=;vobsubsrc=;af=;lavf=;subrender=;harddup=;overburn=
+unset encsid encsdx encsla addsub addsdx addsla savecache txtsub txtsubopts
+zoom=0
+scale=1
+fast=1
+MAXSTEP=6 # burn is the default
+step=$MAXSTEP
+split=0
+vbitrate=16000
+mpegmbr=0
+overscan=0
+iter=0
+bakiter=0
+hispeed=0
+BGTITLE=1
+TANIM=0
+TFMT=png
+TMODE=0
+TKFRM=0
+TSECS=5
+TPART=4
+TPARTSEC=15
+TFONTSIZE=1
+TFONTBG=1
+TLINES=2
+TCPR=2
+MENUERR=0
+DVDPLAY=0
+MENUOS=0
+TSETB=1
+DVDFS=1
+VTSMBG=0
+menufix=0
+cdburndevice=0,0,0
+dvdburndevice=/dev/cdrecorder
+fsize=;fint=;ffrac=;fpre=;audiosize=0
+ASPECT=(1 1 4/3 16/9 2.21)
+CH6LIST=(l r ls rs c lfe)
+TOOL=
+MPEG2ENCOPT=;YUVSCALEROPT=;YUVDENOISE=;MPLEXOPT=;VCDIMAGEROPT=;DVDAUTHOROPT=;CDRDAOOPT=;GROWISOFSOPT=;MUSICINOPT=
+unset MPLAYEROPT MPLEXSTREAM MENCODEROPT
+LPCMPAR=
+SUBLANG=
+unset SUBTEXT AUDIOTEXT CHAPTERTEXT TITLESET EXTWAV PROFILE MSRC
+unset CLEAN
+DEBUG=0
+LAVC=
+WARN=
+LOG=
+LG=0
+SVN=0
+MAXFIX=20
+timelen=0
+ocrsub=0
+slidefps=1
+default_intra=8,16,19,22,26,27,29,34,16,16,22,24,27,29,34,37,19,22,26,27,29,34,34,38,22,22,26,27,29,34,37,40,22,26,27
+default_intra=$default_intra,29,32,35,40,48,26,27,29,32,35,40,48,58,26,27,29,34,38,46,56,69,27,29,35,38,46,56,69,83
+default_inter=16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16
+default_inter=$default_inter,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16
+hires_intra=8,16,18,20,24,25,26,30,16,16,20,23,25,26,30,30,18,20,22,24,26,28,29,31,20,21,23,24,26,28,31,31,21,23,24
+hires_intra=$hires_intra,25,28,30,30,33,23,24,25,28,30,30,33,36,24,25,26,29,29,31,34,38,25,26,28,29,31,34,38,42
+hires_inter=$default_inter
+kvcd_intra=8,9,12,22,26,27,29,34,9,10,14,26,27,29,34,37,12,14,18,27,29,34,37,38,22,26,27,31,36,37,38,40,26,27,29
+kvcd_intra=$kvcd_intra,36,39,38,40,48,27,29,34,37,38,40,48,58,29,34,37,38,40,48,58,69,34,37,38,40,48,58,69,79
+kvcd_inter=16,18,20,22,24,26,28,30,18,20,22,24,26,28,30,32,20,22,24,26,28,30,32,34,22,24,26,30,32,32,34,36,24,26
+kvcd_inter=$kvcd_inter,28,32,34,34,36,38,26,28,30,32,34,36,38,40,28,30,32,34,36,38,42,42,30,32,34,36,38,40,42,44
+tmpgenc_intra=8,16,19,22,26,27,29,34,16,16,22,24,27,29,34,37,19,22,26,27,29,34,34,38,22,22,26,27,29,34,37,40,22,26,27
+tmpgenc_intra=$tmpgenc_intra,29,32,35,40,48,26,27,29,32,35,40,40,58,26,27,29,34,38,46,56,69,27,29,35,38,46,56,69,83
+tmpgenc_inter=16,17,18,19,20,21,22,23,17,18,19,20,21,22,23,24,18,19,20,21,22,23,24,25,19,20,21,22,23,24,26,27,20,21,22
+tmpgenc_inter=$tmpgenc_inter,23,25,26,27,28,21,22,23,24,26,27,28,30,22,23,24,26,27,28,30,31,23,24,25,27,28,30,31,33
+TXTSUBDEF=( languageId nolang delay 0 font arial.ttf size 28 bottom-margin 30 characterset ISO8859-1 movie-height-reduction 0 fps default )
+AVISUBDEF=( format SubViewer name-extension null fileformat unix version-number off delay 0 fps default suffix default )
+
+#### encode2mpeglight.sh defauls
+mpeg=1
+encode=7:2:2
+
+(($#)) || ! shortusage || exit 1
+CMD=( "$@" )
+
+#### options array
+MOPT=( $(mlistopt | grep -v -e : -e '*')
+       $(mlistopt | sed -n '/:/s/:.*/"/p' | uniq)
+       $(mplayer -vfhelp 2>&1 | awk '/vf-/{printf("\"%s\"\n",$1)}')
+       $(mplayer -zrhelp 2>/dev/null | awk '$1~/^-zr/{printf("\"%s\"\n",substr($1,2))}') )
+
+###############################################################################
+#### check rc file
+###############################################################################
+if [[ -s ~/.encode2mpegrc ]]; then
+    for ((i=0;i<${#CMD[*]};i++)); do
+        [[ ${CMD[i]} = -norc ]] && norc=1 && break
+    done
+    if [[ ! $norc ]] && ! awk '{if($1~"^#")exit 1}' ~/.encode2mpegrc ; then
+        do_log "++ WARN: [$PROGNAME] ~/.encode2mpegrc appears to contain comments, ignoring it" >/dev/null
+        norc=1
+    fi
+    [[ ! $norc ]] && set -- $(<~/.encode2mpegrc) "$@"
+fi
+
+###############################################################################
+#### arguments parsing
+###############################################################################
+while (($#)) ; do
+#### PARSING
+    case $1 in
+        -h|-help)
+            #-list the available options
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2
+            shortusage
+            exit
+            ;;
+        -l|-longhelp)
+            #-print this help page
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2
+            usage
+            exit
+            ;;
+        -doc|-documentation) #[[<browser>:][<html page>]]
+            #-show the html documentation
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2
+            [[ ${2%:*} != $2 ]] && BROWSER=${2%:*}
+            show_html ${2#*:}
+            exit
+            ;;
+        -noshowlog)
+            #-do not show the log file
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2
+            quiet=1
+            ;;
+        -o|-output) #<filename>
+            #-filename of the output stream
+            echo "$2" | grep -q '/' && [[ ! -d ${2%/*} ]] && echo "**ERROR: [$PROGNAME] directory ${2%/*} argument of '$1' not found" && exit 1
+            output=$2
+            shift
+            ;;
+        -a) #<n>
+            # aspect ratio     VCD SVCD  DVD
+            #     1 -    1:1    x    *    x	x = mpeg2enc and mencoder
+            #     2 -    4:3    x    x    x	* = mencoder only
+            #     3 -   16:9    x    x    x
+            #-    4 -  2.21:1        *    x
+            MPEG2ENCOPT="$MPEG2ENCOPT -a $2"
+            [[ $2 -eq 0 ]] && MPEG2ENCOPT="${MPEG2ENCOPT% ${2}} 1"
+            mpegaspect=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -mpegfixaspect) #[pad|crop]
+            # force the aspect ratio of the source video to match the one
+            # specified with -a; this can be done padding the video with
+            #-black lines or cropping the video; the default is padding
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 aspect
+            mpegfixaspect=0
+            if [[ $2 = pad || $2 = crop ]]; then
+                [[ $2 = crop ]] && mpegfixaspect=1
+                shift
+            fi
+            ;;
+        -rotate) #<0-3>
+            # rotate the source video by 90 degrees; set -mpegfixaspect;
+            # 0 rotate clockwise and flip, 1 rotate clockwise
+            #-2 rotate counterclockwise, 3 rotate counterclockwise and flip
+            rotate=1
+            echo "$2" | grep -q '^[0-3]$' && rotate=$2
+            isarg $1 "$2" aspect
+            shift
+            : ${mpegfixaspect:=0}
+            ;;
+        -overscan) #<n>
+            # shrink the video of n% and surround it with black borders,
+            # n can be 1-99, using 10 should make visible on a TV the full video
+            # image; if n is negative, the result is a magnification of the
+            # central part of the image; n>0 set -mpegfixaspect pad, n<0 set
+            #--mpegfixaspect crop; in Avi Mode n can only be positive
+            echo "$2" | grep -qE '^-?[0-9]?[0-9]$' && overscan=$2
+            [[ ${2:0:1} = - ]] && mpegfixaspect=1 || mpegfixaspect=0
+            isarg $1 "${2#-}" $( ((step==1)) && echo Avi || echo aspect)
+            shift
+            ;;
+        -abr) #<n>
+            #-audio bit rate of the VCD/SVCD/DVD [MP2:224,MP3:128,AC3:448]
+            if [[ $2 = list ]]; then
+                sed '/^check_abr/,/case/!d;/'"$audioformat"':/!d;/[^0-9]'"$asr"'/!d;s/[^)]*)//;s/  */ /g;s/^/'"$audioformat $asr"'/' "$PROGFILE"
+                exit
+            fi
+            abr=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -asr) #<n>
+            #-audio sample rate of the VCD/SVCD/DVD [MP2/MP3:44100,AC3:48000]
+            asr=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -vbr) #<n>
+            #-video bit rate of the VCD/SVCD/DVD [VCD:1152,SVCD:2500,DVD:7500]
+            vbr=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -vfr) #<n>
+            # video frame rate of the output stream
+            # [NTSC/VCD:4,NTSC/SVCD-DVD:1,PAL:3,AVI:2]
+            #     1 - 24000.0/1001.0 (NTSC 3:2 pulldown converted FILM)
+            #     2 - 24.0 (NATIVE FILM)
+            #     3 - 25.0 (PAL/SECAM VIDEO / converted FILM)
+            #     4 - 30000.0/1001.0 (NTSC VIDEO)
+            #     5 - 30.0
+            #     6 - 50.0 (PAL FIELD RATE)
+            #     7 - 60000.0/1001.0 (NTSC FIELD RATE)
+            #-    8 - 60.0
+            vfr=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -n|-video-norm) #<n|p|s>
+            # set the video norm of the VCD/SVCD/DVD; NTSC is USA standard,
+            # PAL is European standard and SECAM is French standard; concerning
+            #-VCD/SVCD/DVD encoding, SECAM is equivalent to PAL
+            case $2 in
+                n|N|ntsc|NTSC)   videonorm=n ;;
+                p|P|pal|PAL)     videonorm=p ;;
+                s|S|secam|SECAM) videonorm=s ;;
+                doc|help) isarg $1 $2 direct ;;
+                *) echo "**ERROR: [$PROGNAME] invalid argument '$2' for option '$1'" ; "$PROGFILE" -norc $1 help ; exit 1 ;;
+            esac
+            shift
+            ;;
+        -p|-pulldown|-telecine) #
+            # set a flag in the output stream of the SVCD/DVD that tell the
+            # decoder to play the movie as NTSC video using "3:2 pull-down"
+            #-instead of "-vfr 4" use "-vfr 1 -p" (smaller output stream)
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            telecine=1
+            ;;
+        -res) #<1-7>
+            # force one of the following video resolutios:
+            #                      PAL            NTSC
+            #		1	352x288		352x240 (VCD)
+            #		2	352x576		352x480 (CVD)
+            #		3	480x576		480x480 (SVCD)
+            #		4	528x576		528x480 (KVCD)
+            #		5	544x576		544x480 (KVCD)
+            #		6	704x576		704x480 (DVB)
+            #-		7	720x576		720x480 (DVD)
+            isarg $1 "$2" direct
+            echo "$2" | grep -q '^[1-7]$' && MPGRES=$2
+            shift
+            ;;
+        -gop) #<n>
+            # set the number of pictures per GOP; the default value is the one
+            #-required by the standard
+            isarg $1 "$2" direct
+            GOP=$2
+            shift
+            ;;
+        -kvcd) #<1-4>
+            # generate KVCD (www.kvcd.net) compliant frames on output; the
+            # following resolutions are possible:
+            #		  PAL		  NTSC		GOP
+            #	1	528x576		528x480		24
+            #	2	528x576		528x480		def
+            #	3	544x576		544x480		24
+            #-	4	544x576		544x480		def
+            isarg $1 "$2" direct
+            a=1
+            echo "$2" | grep -q '^[1-4]$' && a=$2
+            shift 2
+            set -- " " -qmatrix kvcd -res $((3+(a+1)/2)) $([[ $a = [13] ]] && echo "-gop 24") "$@"
+            ;;
+        -vcd) #
+            #-generate VCD compliant frames on output (default)
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            frameformat=VCD
+            ;;
+        -svcd) #[1-2]
+            # generate SVCD compliant frames on output; the following resolutions
+            # are possible:        PAL            NTSC
+            #		1	480x576		480x480
+            #		2	352x288		352x240
+            #-default is 1
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            frameformat=SVCD
+            frameres=1
+            echo "$2" | grep -q '^[1-2]$' && frameres=$2 && shift
+            ;;
+        -svcdht) #
+            # enable the VCD header trick; this trick could allow to play SVCD on
+            # DVD player that does not support SVCD. For more details see:
+            #-http://www.videohelp.com/svcd
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            trick=1
+            ;;
+        -dvd) #[1-5]
+            # generate DVD compliant frames on output; the following resolutions
+            # are possible:        PAL            NTSC
+            #		1	720x576		720x480
+            #		2	704x576		704x480
+            #		3	480x576		480x480 (non standard DVD-SVCD)
+            #		4	352x576		352x480
+            #		5	352x288		352x240
+            #-default is 1
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            frameformat=DVD
+            frameres=1
+            echo "$2" | grep -q '^[1-5]$' && frameres=$2 && shift
+            ;;
+        -vcodec) #<mpeg1|mpeg2|mpeg4>
+            #-force the selected video codec [VCD:mpeg1,SVCD-DVD:mpeg2,AVI:mpeg4]
+            isarg $1 "$2" Avi
+            [[ $2 = mpeg[124] ]] && vcodec=$2 && [[ ${vcodec:4:1} = [12] ]] && vcodec=${vcodec}video
+            shift
+            ;;
+        -qmatrix) #<kvcd|tmpgenc|default|hi-res>
+            # mpeg2enc custom quantization matrices: kvcd produce a smaller
+            #-output stream, hi-res is good for hi-quality source material
+            case $2 in
+                kvcd|tmpgenc|default|hi-res)
+                    MPEG2ENCOPT="$MPEG2ENCOPT -K $2"
+                    intra_matrix=$(eval echo \$${2/-}_intra)
+                    inter_matrix=$(eval echo \$${2/-}_inter)
+                    ;;
+                *)
+                    MPEG2ENCOPT="$MPEG2ENCOPT -K default"
+                    intra_matrix=
+                    inter_matrix=
+                    ;;
+            esac
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -mpeg1vbr) #
+            # produce a VCD/MPEG-1 variable bit rate stream, the output stream
+            # is smaller and a complete movie could fit in one VCD; check if
+            #-your hardware player support variable bit rate VCD
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            MPEG2ENCOPT="$MPEG2ENCOPT -q 8"
+            LAVC=":vrc_buf_size=327"
+            ;;
+        -mpegmbr) #<n>
+            # set the maximum video bit rate; the default is the value of vbr;
+            #-a value of 0 remove the limit
+            mpegmbr=$2
+            [[ $2 -eq 0 ]] && mpegmbr=
+            isarg $1 "$2" mpeg
+            shift
+            ;;
+        -mpegchannels) #<1-6>
+            # number of channels of the MPEG audio stream, 1-6 for ac3 and lpcm;
+            # 1-2 for mp1, mp2 and mp3; 3-6 for mp2 Multichannel Audio; for the
+            #-avi audio stream use MPlayer's option -channels
+            mpegchannels=2
+            isarg $1 "$2" direct
+            echo "$2" | grep -q '^[1-6]$' && mpegchannels=$2
+            shift
+            ;;
+        -normalize)
+            #-normalize to the audio stream(s)
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 $([[ $encode ]] && echo Avi || echo direct)
+            normalize=1
+            ;;
+        -volume) #<n>
+            # change amplitude of the audio stream; less than 1.0 decreases,
+            #-greater than 1.0 increases (float)
+            volume=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -noscale) #
+            # encode2mpeg automatically scales the video according to the MPEG
+            # profile chosen, this option disables this feature; used mainly
+            # for debug purposes.
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            scale=
+            ;;
+        -monochrome)
+            #-create B/W video or avoid color artifacts in B/W source streams
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 direct
+            YUVSCALEROPT="$YUVSCALEROPT -O MONOCHROME"
+            ;;
+        -split) #<n>
+            #-split the resulting MPEG stream in <n> MB chunks.
+            split=$2
+            isarg $1 "$2" direct
+            shift
+            ;;
+        -encode) #<n:m:i[,b]>
+            # the parameter n:m:i selects the audio codec, video codec options
+            # and number of pass for mencoder, possible values are:
+            #   n                   m				i
+            #   0 copy              0 copy			1
+            #   1 pcm               1 libavcodec/mpeg		2
+            #   2 mp3lame/fast      2 as 1 + mbd=2		3
+            #   3 mp3lame/standard  3 as 1 + compression opts
+            #   4 libavcodec/mp2    4 as 1 + quality opts
+            #   5 libavcodec/mp3
+            #   6 libavcodec/ac3    for m=[2-4] and i>1 turbo is on
+            #   7 toolame/mp2
+            #   8 libfaac/aac
+            #-  with n=[3-7] b specify the audio bit rate
+            encode=5:3:2
+            echo "$2" | grep -qE '^[0-8]:[0-4]:[1-9](,[0-9]+)?$' && encode=$2
+            isarg $1 "$2" $([[ $mpeg ]] && echo mpeg || echo Avi)
+            shift
+            ;;
+        -telecinesrc) #
+            # if you use -encode n:0:i in MPEG Mode, encode2mpeg needs to know
+            # if the source NTSC MPEG is telecined, otherwise the stream copy may
+            # not work properly; normally encode2mpeg is able to detect telecined
+            # sources, but, if the source MPEG is mixed, part not telecined and
+            # part telecined, encode2mpeg may fail to detect it. In such case,
+            #-you can use this option to specify a telecined source.
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 mpeg
+            telesrc=1
+            ;;
+        -turbo) #<0-1>
+            # disable (0) or force (1) turbo mode for the first pass of N pass
+            #-encoding (N>1)
+            echo "$2" | grep -q '^[0-1]$' && turbo=$2
+            isarg $1 "$2" Avi
+            shift
+            ;;
+        -hispeed) #
+            # increase the encoding speed of 25-50% (with -encode n:1:1); the
+            # output video stream will be bigger and can have poor quality; this
+            # option is mainly intented for testing, but it can be used if you
+            #-want to create more quickly an MPEG-4/AVI or a DVD.
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 Avi
+            hispeed=1
+            ;;
+        -bframes) #<0-4>
+            # specify the number of B frames; if -encode is n:3:i the default 2,
+            #-otherwise the default is no B frames; for VCD the default is 2
+            echo "$2" | grep -q '^[0-4]$' && bframes=$2
+            isarg $1 "$2" Avi
+            shift
+            ;;
+        -vcustom) #<libavcodec options>
+            # specify a custom set of video options for libavcodec, use with
+            #--encode n:1:i
+            vcustom=$2
+            isarg $1 "$2" Avi
+            shift
+            ;;
+        -acustom) #<mp3lame options>
+            # specify a custom set of lame options (with -encode 2:m:i) or faac
+            #-options (with -encode 8:m:i)
+            acustom=$2
+            isarg $1 "$2" Avi
+            shift
+            ;;
+        -encsid) #<sid0,sid1,...>
+            #-dump the DVD vobsub, sid is the number you give the -sid option
+            # of MPlayer.
+            encsid=( ${2//,/ } )
+            isarg $1 "$2" subtitle
+            shift
+            ;;
+        -encsdx) #<sid0,sid1,...>
+            # if you dump subtitle 2 and 4 and you want them to have id 0 and 1
+            #-use -encsid 2,4 -encsdx 0,1
+            encsdx=( ${2//,/ } )
+            isarg $1 "$2" subtitle
+            shift
+            ;;
+        -encsla) #<sla0,sla1,...>
+            #-see doc/html/subtitle.html
+            encsla=( ${2//,/ } )
+            isarg $1 "$2" subtitle
+            shift
+            ;;
+        -usespeed) #
+            # do frame rate conversion changing the playback speed; this option
+            # can be used if you are converting from NTSC 24fps, with or without
+            # telecine, to PAL 25fps and viceversa; during normal frame rate
+            # conversion, frames are skipped or duplicated as needed; with this
+            #-option all the frames are encoded
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 mpeg
+            usespeed=1
+            ;;
+        -usesbr) #[1-6|>100]
+            # use the suggested video bitrate to set the output stream size
+            #   1 - for 650MB CD 		4 - for 2 x 650MB CD
+            #   2 - for 700MB CD (default) 	5 - for 2 x 700MB CD
+            #   3 - for 800MB CD 		6 - for 2 x 800MB CD
+            #   n where n > 100 will set the file size to n MB
+            #-with -multiaudio you must to set the streamsize in MB
+            usesbr=2
+            SBR=(650 700 800 "2 x 650" "2 x 700" "2 x 800")
+            echo "$2" | grep -q '^[1-6]$' && usesbr=$2 && shift
+            echo "$2" | grep -qE '^[1-9][0-9]{2,}$' && usesbr=$2 && shift
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 Avi
+            ;;
+        -cpu) #<n>
+            #-number of cpu to use, default all the cpu present in the system
+            cpu=1
+            echo "$2" | grep -q '^[1-8]$' && cpu=$2
+            isarg $1 "$2" Avi
+            shift
+            ;;
+        -interlaced)
+            #-turn on optimization for interlaced source video.
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 $([[ $mpeg ]] && echo mpeg || echo Avi)
+            interlaced=1
+            ;;
+        -slidefps) #<n>
+            # fps to use when creating video from pictures, default is 1; if
+            # there is a audio file associated with a picture, the duration of
+            #-the audio file is used
+            isarg $1 "$2" images
+            slidefps=$(awk -v a=$2 'BEGIN{printf("%.3f",1/a)}')
+            shift
+            ;;
+        -slideaudio) #<audio file>
+            # use the content of <audio file> as audio stream when creating video
+            #-from pictures; it works correctly only if used with mf://singlepic
+            slideaudio=$2
+            if [[ ! -f $2 && $2 != /dev/null ]]; then
+                [[ $2 = doc || $2 = help || ! $2 ]] && isarg $1 "$2" images || ! echo "**ERROR: [$PROGNAME] slide audio file '$2' not found" || exit 1
+            fi
+            shift
+            ;;
+        -norc)
+            #-do not use the settings in the file $HOME/.encode2mpegrc
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2 rc
+            ;;
+        -debug)
+            # make a more verbose log file and creates a debug file; if you are
+            # submitting a bug report, use this option and compress and send the
+            #-log file and the debug file
+            [[ $2 = doc || $2 = help ]] && isarg $1 $2
+            echo "$2" | grep -q '^[0-7]$' && DEBUG=$2 && shift || DEBUG=3
+            ;;
+        (-frames)
+            frames=$2
+            isarg $1 $2
+            shift
+            ;;
+        (-channels)
+            channels=$2
+            isarg $1 $2
+            shift
+            ;;
+        (-srate)
+            MPLAYEROPT=( "${MPLAYEROPT[@]}" -srate $2 -af-adv force=1 )
+            srate=$2
+            isarg $1 $2
+            shift
+            ;;
+        (-endpos)
+            endpos=$2
+            isarg $1 $2
+            shift
+            ;;
+        (-hr-edl-seek)
+            MENCODEROPT=( "${MENCODEROPT[@]}" $1 )
+            ;;
+        (-vf)
+            vf="-vf $2"
+            MPLAYEROPT=( "${MPLAYEROPT[@]}" $vf )
+            isarg $1 $2
+            shift
+            ;;
+        (-af)
+            af="-af $2"
+            isarg $1 $2
+            shift
+            ;;
+        (-dvd-device)
+            dvddev=$2
+            isarg $1 $2
+            shift
+            ;;
+        (mf://*)
+            MPLAYEROPT[${#MPLAYEROPT[*]}]=$1
+            pictsrc=1
+            a=$IFS
+            IFS=,
+            PICTSRC=( ${1#mf://} )
+            IFS=$a
+            srate=48000
+            ;;
+        (-sub)
+            [[ ! -f $2 ]] && echo "**ERROR: [$PROGNAME] subtitle file '$2' not found" && exit 1
+            MPLAYEROPT=( "${MPLAYEROPT[@]}" $1 "$2" )
+            subrender=1
+            shift
+            ;;
+        (-mpeg|-mpegonly|-nosplit) ;;
+        *)
+            if [[ ! $TOOL ]]; then
+                [[ ${1:0:1} = - ]] && ! echo "${MOPT[@]}" | grep -q "\"${1#-}\"" && \
+                  echo -e "Unknown option $1\nIf this is a valid MPlayer option add '-toolopts mplayer' in front of it" && exit 1
+                MPLAYEROPT[${#MPLAYEROPT[*]}]=$1
+            else
+                case $TOOL in
+                    *)
+                        MPLAYEROPT[${#MPLAYEROPT[*]}]=$1
+                        ;;
+                esac
+            fi
+            ;;
+    esac
+    shift
+done
+
+[[ -s ~/.encode2mpegrc && ! $norc ]] && do_log "   INFO: [$PROGNAME] using .encode2mpegrc settings: '$(<~/.encode2mpegrc)'"
+if [[ $subrender || $harddup ]]; then
+    if [[ $vf ]]; then
+        vf=$vf${subrender:+,expand=::::1}
+        [[ $harddup ]] && ! echo $vf | grep -q harddup && vf=$vf,harddup
+        for ((a=0;a<${#MPLAYEROPT[*]};a++)); do
+            [[ ${MPLAYEROPT[a]} = -vf ]] && MPLAYEROPT[a+1]=${vf#-vf }
+        done
+    else
+        vf="-vf ${subrender:+expand=::::1}${harddup:+${subrender:+,}harddup}"
+        MPLAYEROPT=( "${MPLAYEROPT[@]}" $vf )
+    fi
+fi
+
+###############################################################################
+#### debug part
+###############################################################################
+if ((DEBUG)); then
+    if ((DEBUG & 1)); then
+        #### redirect stdout and stderr to the debug file
+    exec 3>&1
+    rm -f "$output".debug.fifo
+    mkfifo "$output".debug.fifo
+    tee "$output".debug <"$output".debug.fifo >&3 &
+    PROCTEE=$!
+    exec &>"$output".debug.fifo
+        trap 'rm "$output".debug.fifo' 0
+    fi
+    if ((DEBUG & 2)); then
+        #### catch mplayer/mencoder errors
+        mplayer () {
+            command mplayer "$@"
+            ret=$? ; (( ret )) && error_line "$FUNCNAME $*" || true
+        }
+        mencoder () {
+            command mencoder "$@"
+            ret=$? ; (( ret )) && error_line "$FUNCNAME $*" || true
+        }
+    fi
+    ((DEBUG & 4)) && set -x
+fi
+
+###############################################################################
+#### ERROR if some options conflict is detected part 1/2
+###############################################################################
+#### mplayer/mencoder
+for a in mplayer mencoder ; do
+    type -f $a &>/dev/null || ! echo "**ERROR: [$PROGNAME] $a missing, install $(echo ${a:0:2} | tr '[:lower:]' '[:upper:]')${a:2}" || exit 1
+done
+#### output stream name check
+[[ ! $output ]] && echo "**ERROR: [$PROGNAME] name of the output stream missing (-o name)" && exit 1
+#### unspecified video norm
+[[ ! $videonorm && step -gt 1 && ! ( $mpeg && ${encode%,*} = ?:0:? && ! $menu ) && ${#TITLESET[*]} -eq 0 ]] && \
+  echo "**ERROR: [$PROGNAME] you must specify a video norm (-n n|p|s)" && exit 1
+#### libfaac check
+if [[ ${encode%,*} = 8:?:? ]]; then
+    ! mencoder -oac help 2>/dev/null | grep -q faac && echo "**ERROR: [$PROGNAME] missing libfaac support in mencoder [-encode 8:m:i]" && exit 1
+fi
+#### mpeg4
+if [[ $vcodec = mpeg4 ]]; then
+    [[ $pictsrc && $step -gt 1 && $mpeg ]] && echo "**ERROR: [$PROGNAME] -vcodec mpeg4, -mpeg and mf://file are not compatible" && exit 1
+fi
+#### pictsrc
+if [[ $pictsrc ]]; then
+    [[ $slideaudio != /dev/null && ${encode%,*} = 0:?:? && $mpeg ]] && \
+      echo "**ERROR: [$PROGNAME] -encode 0:m:i is not compatible with mf:// in MPEG Mode" && exit 1
+    [[ $audioonly ]] && echo "**ERROR: [$PROGNAME] -audioonly does not work with mf://" && exit 1
+fi
+#### -encode 1:m:i is not allowed
+[[ ${encode%,*} = 1:?:? ]] && echo "**ERROR: [$PROGNAME] do not use -encode 1:m:i" && exit 1
+
+###############################################################################
+#### WARN if some options conflict is detected
+###############################################################################
+#### missing toolame support
+if [[ ${encode%,*} = 7:?:? ]]; then
+    if ! mencoder -oac help 2>/dev/null | grep -q t[wo]olame ; then
+        encode=4:${encode#?:}
+        do_log "++ WARN: [$PROGNAME] missing toolame support in mencoder, setting -encode $encode"
+    else
+        mencoder -oac help 2>/dev/null | grep -q toolame && TOOLAME=toolame || TOOLAME=twolame
+    fi
+fi
+
+###############################################################################
+#### set default values for unspecified parameters
+###############################################################################
+if [[ ! $multiaudio ]]; then
+    audiostream=1
+fi
+###############################################################################
+if [[ $encode ]]; then
+    case ${encode%%:*} in
+        0) [[ ! $pictsrc ]] &&
+               AFMT=acopy ;;
+        2|3|5) AFMT=mp3 ;;
+        4|7)   AFMT=mp2 ;;
+        6)     AFMT=ac3 ;;
+        8)     AFMT=aac ;;
+    esac
+    [[ $AFMT ]] && eval : ${audioformat:-\${$AFMT:=copy\}}
+fi
+: ${frameformat:=VCD}
+: ${audioformat:=${AFMT:-mp2}}
+: ${mp1:=mp2enc}
+((${mpegchannels:-2}>2)) && : ${mp2:=musicin} || : ${mp2:=mp2enc}
+: ${mp3:=lame}
+: ${ac3:=mencoder}
+: ${dts:=copy}
+: ${aac:=faac}
+case $audioformat in
+    mp1)
+        case ${mpegchannels:-2} in
+            1) : ${abr:=192} ;;
+            2) : ${abr:=384} ;;
+        esac
+        ;;
+    mp2)
+        case ${mpegchannels:-2} in
+            1) : ${abr:=112} ;;
+            2) : ${abr:=224} ;;
+            [3-6]) : ${abr:=384} ;;
+        esac
+        ;;
+    mp3)
+        case ${mpegchannels:-2} in
+            1) : ${abr:=64} ;;
+            2) : ${abr:=128} ;;
+        esac
+        ;;
+    ac3)
+        case ${mpegchannels:-2} in
+            1) : ${abr:=96} ;;
+            2) : ${abr:=192} ;;
+            3) : ${abr:=320} ;; # to verify
+            4) : ${abr:=384} ;; # to verify
+            5) : ${abr:=448} ;; # to verify
+            6) : ${abr:=448} ;;
+        esac
+        ;;
+    aac) : ${abr:=$((${mpegchannels:-2}*48))} ;;
+    #### mplex fails with asr != 48000 for lpcm
+    lpcm) : ${asr:=48000} ${abr:=$((asr*16*${mpegchannels:-2}/1024))} ;;
+esac
+if [[ ${encode%,*} = 0:?:? && ${!audioformat} = copy ]]; then
+    abr=0
+    if [[ ! $multiaudio ]]; then
+        get_abr
+    fi
+fi
+[[ $mpeg && ${encode%,*} = ?:0:? ]] && \
+  vbr=$(($(id_find ID_VIDEO_BITRATE "${MPLAYEROPT[@]}" ${dvddev:+-dvd-device "$dvddev"} "$@")/1000))
+case $frameformat in
+    DVD) : ${asr:=48000} ;;
+    *)   : ${asr:=44100} ;;
+esac
+case $videonorm in
+    p|s)
+        : ${vfr:=3}
+        ;;
+    n)
+        [[ $frameformat != VCD && ! $vfr && $hispeed -eq 0 && ! $testmca ]] && vfr=1 && telecine=1
+        : ${vfr:=4}
+        ;;
+esac
+[[ $encode && ${encode%,*} != ?:0:? ]] && : ${vfr:=2}
+if [[ ! $ofps ]]; then
+    case $vfr in
+        1) ofps=24000/1001 ;;
+        2) ofps=24 ;;
+        3) ofps=25 ;;
+        4) ofps=30000/1001 ;;
+        5) ofps=30 ;;
+        6) ofps=50 ;;
+        7) ofps=60000/1001 ;;
+        8) ofps=60 ;;
+    esac
+fi
+if [[ $split && $split -eq 0 ]]; then
+    [[ $mpeg ]] && split= || split=800
+fi
+
+###############################################################################
+#### get MPlayer version
+###############################################################################
+mver=$(mencoder 2>/dev/null | awk '$1=="MEncoder"{print $2;exit}')
+
+###############################################################################
+#### threads check
+###############################################################################
+if [[ ! $cpu && -f /proc/cpuinfo ]]; then
+    cpu=$(grep -c ^processor /proc/cpuinfo)
+    #### if there are 2 logical cpu but 1 physical (hyperthreading)
+    #### use only one thread. With kernel 2.4.x it is more efficent.
+    ((cpu==2)) && [[ $(uname -r | cut -f 1-2 -d .) = 2.4 ]] && \
+      [[ $(grep ^siblings /proc/cpuinfo | uniq | wc -l) -eq 1 ]] && \
+      cpu=$((cpu/$(grep ^siblings /proc/cpuinfo | uniq | awk 'END{print $NF}')))
+fi
+((cpu<2)) && cpu=
+
+###############################################################################
+#### -ao pcm arguments
+###############################################################################
+PCMWAV=(pcm:waveheader:fast:file=%$((${#output}+4))%"$output".wav)
+PCMTMP=(pcm:waveheader:fast:file=%$((${#output}+4))%"$output".tmp)
+PCMNOWYUV=(pcm:nowaveheader:fast:file=/dev/fd/4)
+
+[[ $dvddev ]] && MPLAYEROPT=( "${MPLAYEROPT[@]}" -dvd-device "$dvddev" )
+
+###############################################################################
+#### mplayer/mencoder/mjpegtools options
+###############################################################################
+
+#### mencoder output suffix
+if [[ $encode ]]; then
+    [[ $mpeg ]] && SUF=mpeg || SUF=avi
+fi
+
+#### MPLAYERINFO is used for [info]
+MPLAYERINFO=( "${MPLAYEROPT[@]}" )
+
+#### mf:// case
+if [[ $pictsrc ]]; then
+    if [[ $slideaudio && $slideaudio != /dev/null ]]; then
+        [[ $(id_find ID_AUDIO_RATE "$slideaudio") != $asr ]] && SRATE="-srate $asr -af-adv force=1" || SRATE=
+        CLEAN[${#CLEAN[*]}]="$output".wav
+        mplayer "$slideaudio" $SRATE -vo null -vc dummy -ao "${PCMWAV[@]}" $afm ${mpegchannels:+-channels $mpegchannels -af channels=$mpegchannels}
+        MPLAYEROPT=( "${MPLAYEROPT[@]}" -fps 1/$(id_find ID_LENGTH "$output".wav) -audiofile "$output".wav )
+    else
+        if [[ $slideaudio = /dev/null ]]; then
+            MPLAYEROPT=( "${MPLAYEROPT[@]}" -fps $slidefps )
+            encode=0:${encode#?:}
+        else
+            MPLAYEROPT=( "${MPLAYEROPT[@]}" -fps $slidefps -audiofile /dev/zero -audio-demuxer 20 -rawaudio format=0x1:rate=48000 )
+        fi
+    fi
+fi
+
+#### MENCODERARG is used for mencoding, vobsub dumping
+MENCODERARG=( "${MPLAYEROPT[@]}" ${frames:+-frames $frames} )
+
+MENCODERARG=( "${MENCODERARG[@]}" "${MENCODEROPT[@]}" ${endpos:+-endpos $endpos} ${ofps:+-ofps $ofps} )
+if [[ $mpeg && $mpegchannels ]]; then
+    MENCODERARG=( "${MENCODERARG[@]}" -channels $mpegchannels )
+    af=$(echo "${af:--af }${af:+,}" | sed 's/channels=[^,]*,//')channels=$mpegchannels
+elif [[ $channels ]]; then
+    MENCODERARG=( "${MENCODERARG[@]}" -channels $channels )
+    af=$(echo "${af:--af }${af:+,}" | sed 's/channels=[^,]*,//')channels=$channels
+fi
+
+YUVSCALEROPT="-v 1 -n $videonorm ${scale:+-O $frameformat} $YUVSCALEROPT"
+
+MPEG2ENCOPT="${cpu:+-M $cpu }-v 1 -S ${split:-50000} -n $videonorm -F $vfr -s -r 16 ${telecine:+-p} $MPEG2ENCOPT"
+case $vfr in
+    1|2) MPEG2ENCOPT="-g 6 -G ${GOP:-12} $MPEG2ENCOPT" ;;
+    3|6) MPEG2ENCOPT="-g 6 -G ${GOP:-15} $MPEG2ENCOPT" ;;
+    4|5|7|8) MPEG2ENCOPT="-g 9 -G ${GOP:-18} $MPEG2ENCOPT" ;;
+esac
+[[ $frameformat = VCD ]] && MPEG2ENCOPT="-R 2 $MPEG2ENCOPT"
+echo "$MPEG2ENCOPT" | grep -q -e '-K hi-res' && YUVSCALEROPT="-M BICUBIC $YUVSCALEROPT" && \
+  MPEG2ENCOPT="-4 1 -2 1 $MPEG2ENCOPT" || MPEG2ENCOPT="-4 2 -2 1 $MPEG2ENCOPT"
+
+case $frameformat in
+    VCD) MPGRES=${MPGRES:-1} ;;
+    SVCD)
+        case $frameres in
+            1) MPGRES=${MPGRES:-3} ;;
+            2) MPGRES=${MPGRES:-1} ;;
+        esac
+        ;;
+    DVD)
+        case $frameres in
+            1) MPGRES=${MPGRES:-7} ;;
+            2) MPGRES=${MPGRES:-6} ;;
+            3) MPGRES=${MPGRES:-3} ;;
+            4) MPGRES=${MPGRES:-2} ;;
+            5) MPGRES=${MPGRES:-1} ;;
+        esac
+        ;;
+esac
+case $MPGRES in
+    1) H_RES=352 ; [[ $videonorm = n ]] && V_RES=240 || V_RES=288 ;;
+    2) H_RES=352 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
+    3) H_RES=480 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
+    4) H_RES=528 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
+    5) H_RES=544 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
+    6) H_RES=704 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
+    7) H_RES=720 ; [[ $videonorm = n ]] && V_RES=480 || V_RES=576 ;;
+esac
+case $frameformat in
+    VCD)
+        : ${vbr:=1152}
+        MPEG2ENCOPT="-f 2 -b $vbr -V 46 -B $(((abr*audiostream*101875-vbr*2819+3980000)/100000)) $MPEG2ENCOPT"
+        MPLEXOPT="-f 2 -V -b 46 -r $(((abr*audiostream+vbr)*4)) $MPLEXOPT"
+        VCDIMAGEROPT="-t vcd2 $VCDIMAGEROPT"
+        H_STILL=704
+        [[ $videonorm = n ]] && V_STILL=480 || V_STILL=576
+        ((MPGRES!=1)) && YUVSCALEROPT="-O SIZE_${H_RES}x${V_RES} ${YUVSCALEROPT/ -O $frameformat}"
+        MAXBR=1394
+        ;;
+    SVCD)
+        : ${vbr:=2500}
+        MPEG2ENCOPT="-f 5 -b $vbr -V 113 -B $(((abr*audiostream*101250+vbr*742+1665400)/100000)) $MPEG2ENCOPT"
+        MPLEXOPT="-V -b 113 -r $(((abr*audiostream+vbr)*4)) $MPLEXOPT"
+        if [[ $trick ]]; then
+            MPLEXOPT="-f 2 $MPLEXOPT"
+            VCDIMAGEROPT="-t vcd2 $VCDIMAGEROPT"
+        else
+            MPLEXOPT="-f 5 $MPLEXOPT"
+            VCDIMAGEROPT="-t svcd $VCDIMAGEROPT"
+        fi
+        H_STILL=704
+        [[ $videonorm = n ]] && V_STILL=480 || V_STILL=576
+        ((frameres>1||MPGRES!=3)) && YUVSCALEROPT="-O SIZE_${H_RES}x${V_RES} ${YUVSCALEROPT/ -O $frameformat}"
+        MAXBR=2778
+        ;;
+    DVD)
+        : ${vbr:=7500}
+        MPEG2ENCOPT="-f 8 -b $vbr -V 230 -B $(((abr*audiostream*101250+vbr*742+1665400)/100000)) $MPEG2ENCOPT"
+        MPLEXOPT="-f 8 -V -b 230 -r $(((abr*audiostream+vbr)*4)) $MPLEXOPT"
+        H_STILL=720
+        [[ $videonorm = n ]] && V_STILL=480 || V_STILL=576
+        ((frameres>1||MPGRES!=7)) && YUVSCALEROPT="-O SIZE_${H_RES}x${V_RES} ${YUVSCALEROPT/ -O $frameformat}"
+        MAXBR=10080
+        ;;
+esac
+
+###############################################################################
+#### mencoder audio/video/pass options
+###############################################################################
+if [[ $encode ]]; then
+    OPTIONS="-noskiplimit -sws $((hispeed?1:7))"
+    if [[ $mpeg ]]; then
+        # mencoder can put in the MPEG container:
+        # video: mpeg1, mpeg2, mpeg4
+        # audio: mp1, mp2, mp3, ac3, aac (not yet: lpcm, dts)
+        [[ ${encode%,*} != ?:0:? ]] && : ${mpegaspect:=2}
+        #MUX="-mpegopts ${mpegaspect:+vaspect=${ASPECT[mpegaspect]}:}:vbitrate=${vbr}"
+        MUX="-mpegopts "
+        if [[ $telecine ]]; then
+            if [[ $vcodec = mpeg2video || ! $vcodec && $frameformat != VCD ]]; then
+                if [[ $vfr = [12] ]]; then
+                    [[ $videonorm = n ]] && MUX2=":telecine" || MUX2=":film2pal"
+                else
+                    do_log "++ WARN: [$PROGNAME] telecine only works with 24000/1001 or 24 fps, disabling it"
+                fi
+            else
+                do_log "++ WARN: [$PROGNAME] telecine only works for MPEG-2, disabling it"
+            fi
+        fi
+        case $frameformat in
+            VCD)  MUX="${MUX}format=xvcd"  LAVC="vcodec=${vcodec:-mpeg1video}${LAVC:-:vrc_buf_size=327:vrc_minrate=${vbr}:vrc_maxrate=${vbr}}" ;;
+            SVCD) if [[ $trick ]]; then MUX="${MUX}format=xvcd" ; else
+                  MUX="${MUX}format=xsvcd" ; fi ; LAVC="vcodec=${vcodec:-mpeg2video}:vrc_buf_size=917" ;;
+            DVD)  MUX="${MUX}format=dvd"   LAVC="vcodec=${vcodec:-mpeg2video}:vrc_buf_size=1835" ;;
+        esac
+        case $vfr in
+            1|2) LAVC="$LAVC:keyint=$((hispeed?1:${GOP:-12}))" ;;
+            3|6) LAVC="$LAVC:keyint=$((hispeed?1:${GOP:-15}))" ;;
+            4|5|7|8) LAVC="$LAVC:keyint=$((hispeed?1:${GOP:-18}))" ;;
+        esac
+        [[ $frameformat = VCD && ! $bframes ]] && LAVC="$LAVC:vmax_b_frames=2"
+        [[ $mpegmbr ]] && [[ $mpegmbr -lt $vbr ]] && mpegmbr=$vbr
+        #### -a 1 is SAR=1 (do not scale), not DAR=1
+        [[ $mpegaspect != 1 ]] && LAVC="${LAVC}:aspect=${ASPECT[mpegaspect]}"
+        LAVC="${LAVC}${mpegmbr:+:vrc_maxrate=$mpegmbr}${inter_matrix:+:inter_matrix=${inter_matrix}}${intra_matrix:+:intra_matrix=${intra_matrix}}"
+        OF="-of mpeg"
+        NOSKIP=-noskip
+        vbitrate=$vbr
+        if [[ ${encode%,*} != ?:0:? ]]; then
+            for ((a=0;a<${#MENCODERARG[*]};a++)); do
+                while [[ ${MENCODERARG[a]} = -vf ]]; do
+                    unset MENCODERARG[a] MENCODERARG[a+1]
+                    MENCODERARG=( "${MENCODERARG[@]}" )
+                done
+            done
+            MENCODERARG=( "${MENCODERARG[@]}" ${vf:--vf }${vf:+,}${scale:+scale=${H_RES}:${V_RES}${interlaced:+:1},}harddup )
+        fi
+    fi
+
+    BASIC="$LAVC:vbitrate=${vbitrate}${cpu:+:threads=$cpu}${bframes:+:vmax_b_frames=$bframes}"
+    ((hispeed)) && BASIC="$BASIC:vme=0" || BASIC="$BASIC:psnr"
+    [[ $mpeg && $frameformat = VCD ]] || BASIC="$BASIC${interlaced:+:ildct:ilme}"
+    echo "$YUVSCALEROPT" | grep -q -e '-O MONOCHROME' && BASIC="$BASIC:gray"
+
+    HQ="${BASIC}:mbd=2"
+
+    if [[ $mpeg ]]; then
+        #### dia=6 could be added
+        BESTSIZE="${BASIC}:mbd=1:loop:mv0:vlelim=-4:vcelim=7:trell:precmp=1:cmp=1:subcmp=1"
+        [[ ! $bframes ]] && BESTSIZE="$BESTSIZE:vmax_b_frames=2"
+
+        #### last_pred=1-2 could be added
+        BESTQUALITY="${BASIC}:mbd=2:mv0:precmp=6:cmp=6:subcmp=6"
+        [[ $vbitrate -ge 3500 && $frameformat != VCD && $vcodec != mpeg1video ]] && BESTQUALITY="$BESTQUALITY:dc=9"
+    fi
+
+    case $encode in
+        0:?:?|0:?:?,*) AUDIOPASS="-oac copy" ;;
+        1:?:?|1:?:?,*) AUDIOPASS="-oac pcm" ;;
+        2:?:?|2:?:?,*) AUDIOPASS="-oac mp3lame -lameopts ${acustom:-fast}" ;;
+        3:?:?) AUDIOPASS="-oac mp3lame -lameopts preset=standard" ;;
+        4:?:?) AUDIOPASS="-oac lavc -lavcopts acodec=mp2:abitrate=$abr" ;;
+        5:?:?) AUDIOPASS="-oac lavc -lavcopts acodec=mp3:abitrate=$abr" ;;
+        6:?:?) AUDIOPASS="-oac lavc -lavcopts acodec=ac3:abitrate=$abr" ;;
+        7:?:?) AUDIOPASS="-oac $TOOLAME -${TOOLAME}opts br=$abr" ;;
+        8:?:?) AUDIOPASS="-oac faac -faacopts ${acustom:-br=$abr}" ;;
+        3:?:?,*) AUDIOPASS="-oac mp3lame -lameopts preset=${encode#*,}" ;;
+        4:?:?,*) AUDIOPASS="-oac lavc -lavcopts acodec=mp2:abitrate=${encode#*,}" ;;
+        5:?:?,*) AUDIOPASS="-oac lavc -lavcopts acodec=mp3:abitrate=${encode#*,}" ;;
+        6:?:?,*) AUDIOPASS="-oac lavc -lavcopts acodec=ac3:abitrate=${encode#*,}" ;;
+        7:?:?,*) AUDIOPASS="-oac $TOOLAME -${TOOLAME}opts br=${encode#*,}" ;;
+        8:?:?,*) AUDIOPASS="-oac faac -faacopts ${acustom:-br=${encode#*,}}" ;;
+    esac
+    encode=${encode%,*}
+    case $encode in
+        ?:0:?) VIDEOPASS="$OF $MUX -ovc copy $NOSKIP" ; encode=${encode%%:*}:0:1 ; turbo=0 ;; # copy uses only one pass
+        ?:1:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${BASIC}${vcustom:+:$vcustom}" ; : ${turbo:=0} ;;
+        ?:2:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${HQ}"                         ; : ${turbo:=1} ;;
+        ?:3:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${BESTSIZE}"                   ; : ${turbo:=1} ;;
+        ?:4:?) VIDEOPASS="$OF $MUX$MUX2 -ovc lavc -lavcopts ${BESTQUALITY}"                ; : ${turbo:=1} ;;
+    esac
+    ((turbo)) && turbo=:turbo || turbo=
+    PASS=${encode##*:}
+    [[ $normalize && $encode != 0:?:? ]] && af=${af:--af }${af:+,}volnorm
+fi
+
+
+###############################################################################
+#### more functions
+###############################################################################
+status_bit () {
+    local a
+    case $1 in
+        avi) bit=0 ;;
+        mpv) bit=1 ;;
+        mpa) bit=2 ;;
+        mpg) bit=3 ;;
+        img) bit=4 ;;
+        sub) bit=5 ;;
+        ach) bit=6 ;;
+        fno) bit=7 ;;
+        ch0) bit=8 ;;
+        sbm) bit=9 ;;
+        spl) bit=10 ;;
+    esac
+    if [[ $2 = set ]]; then
+        skip=$((skip|1<<bit))
+    else
+        return $(((skip&1<<bit) && 1))
+    fi
+}
+###############################################################################
+file_size () { #fsize,fint,ffrac,fpre
+    local -a PRE=([1]=K M G T)
+    local i=0
+    fsize=$(ls -l "$1" | awk '{print $5}')
+    fint=$fsize
+    ffrac=0
+    while ((fint>=1024)) ; do
+        ((fint/1024 < 1024)) && ffrac=$((( fint+=51 )%1024))
+        i=$((++i))
+        fint=$((fint/1024))
+    done
+    ffrac=$((ffrac*10/1024))
+    fpre=${PRE[i]}
+}
+###############################################################################
+show_file_info () {
+    file_size "$2"
+    echo "   $1: $2 is $fsize bytes, $fint.$ffrac ${fpre}B" >>"$output".log
+}
+###############################################################################
+show_finalvideo_info () {
+    local codec TYPE i VIDEO OUT ASPECT CH FAAC SUBST
+    SUBST=
+    VIDEO="$(mplayer -nocache -frames 0 -vo null -nosound "$2" 2>/dev/null | grep "^VIDEO:")"
+    if [[ ! $VIDEO ]]; then
+        # MPEGs with MPEG-4 video do not show all the video informations in one line,
+        # assebmling the informations (kbps is missing):
+        OUT="$(mplayer -nocache -frames 1 -vo null -nosound -v "$2" 2>/dev/null)"
+        if echo "$OUT" | grep -q '^\[V].*fourcc:0x10000004' ; then
+            VIDEO="VIDEO:  MPEG-4  $(echo "$OUT" | awk '$1=="VO:"&&$2=="[null]"{print $3}')"
+            ASPECT=$(echo "$OUT" | awk '$1=="Movie-Aspect"{print $3}')
+            case $ASPECT in
+                undefined) VIDEO="$VIDEO  (aspect 1)" ;;
+                1.33:1) VIDEO="$VIDEO  (aspect 2)" ;;
+                1.78:1) VIDEO="$VIDEO  (aspect 3)" ;;
+                2.21:1) VIDEO="$VIDEO  (aspect 4)" ;;
+                *) VIDEO="$VIDEO  (aspect $ASPECT)" ;;
+            esac
+            VIDEO="$VIDEO  $(echo "$OUT" | awk '$1=="[V]"{print $5}')"
+        fi
+    fi
+    echo "   $1: $VIDEO" >>"$output".log
+    #### removed -vc dummy
+    for i in $(mplayer -vo null -ao null -nocache -frames 1 -v "$2" 2>/dev/null | awk '/==> Found audio str/{print $NF}' | sort -n) ; do
+        echo -n "   $1: AUDIO[$i]: " >>"$output".log
+        codec=$(mplayer -ac mp3, -nocache -frames 0 -v -ao null -vo null "$2" -aid $i 2>/dev/null | \
+          sed '/Selected audio codec:/!d;s/[^(]*(//;s/).*//;s/AAC.*/& AAC/;s/.* //')
+        #### AAC info are insufficient/incorrect
+        if [[ $codec = AAC ]]; then
+            CH=$(mplayer -nocache -frames 0 -v -ao null -vo null "$2" -aid $i 2>/dev/null | awk '/FAAD: Negotiated samplerate:/{print $NF}')
+            if type &>/dev/null faad ; then
+                mplayer -dumpaudio -dumpfile "$output".audio -aid $i "$2" 2>/dev/null
+                FAAC=$(faad -i "$output".audio 2>&1 | tail -2 | head -n 1)
+                #ADTS, 4.087 sec, 103 kbps, 44100 Hz
+                rm -f "$output".audio
+                SUBST="s/AAC.*/AAC:$(echo "$FAAC" | sed 's/.*,\([^,]*Hz\).*/\1/'), "
+                SUBST="${SUBST}$CH ch, $(echo "$FAAC" | sed 's/,.*//'),"
+                SUBST="${SUBST}$(echo "$FAAC" | sed 's/.*,\([^,]*kbps\).*/\1/')"
+                SUBST="${SUBST}/;"
+            else
+                SUBST="s/2 ch,/$CH ch,/;"
+            fi
+        fi
+        mplayer -ac mp3, -nocache -frames 0 -v -ao null -vo null "$2" -aid $i 2>/dev/null | sed '/^Opening audio decode/,/^AUDIO:/!d;s/\r//g' | \
+          grep -e '^AC3:' -e '^MPEG' -e '^AUDIO:' | sed 's/AUDIO/'"$codec"'/;'"$SUBST"'q' >>"$output".log
+    done
+    TYPE=$1
+    shift
+    for i ; do
+        show_file_info "$TYPE" "$i"
+    done
+}
+###############################################################################
+video_duration () {
+    mencoder "$@" -ovc copy -nosound -o /dev/null -quiet 2>&1 | awk '/^Video stream:/{print $10+$10/$12}'
+}
+###############################################################################
+job_exit () {
+    EXIT=$?
+        status_bit mpg || [[ ! -f ${output}.mpg && ! -f ${output}01.mpg ]] || show_finalvideo_info  "MPEG" "${output}"*.mpg
+        [[ $usesbr ]] && ((DEBUG && usesbr>6)) && awk -v u=$usesbr -v f=$fsize \
+          'BEGIN{b=u*1024*1024;printf("--DEBUG: [usesbr] target: %dMB (%d bytes), error: %f%%\n",u,b,(b-f)*100/b)}' >>"$output".log
+    sec=$(($(pr_time)-STARTTIME))
+    echo " JOBEND: $output $(pr_date) ($((sec/3600))h$((sec/60%60))m$((sec%60))s)" >>"$output".log
+    rm -f "${CLEAN[@]}" psnr_??????.log
+    ((DEBUG)) && exec >&1- >&2- && exec >&3
+    if [[ -f $output.yuvscaler.log || -f $output.mpeg2enc.log ]]; then
+        echo
+    else
+        ((!EXIT)) && [[ ! $quiet ]] && cat "$output".log
+    fi
+    ((DEBUG)) && rm -f "$output".debug.fifo && kill $PROCTEE
+}
+###############################################################################
+me_log () {
+    rm -f "$output".fifo
+    mkfifo "$output".fifo
+    tee -a /dev/stderr <"$output".fifo | sed 's/.*\r//' | \
+      awk '/^PSNR:|^M[EP][ln]|^There are |^\[open]|^audio stream:|^number of|^subtitle|^==> |^Recommended video bitrate/{sub(/^/,"   INFO: [mencoder] ");
+        print}' >>"$output".log &
+}
+###############################################################################
+me_bit_log () {
+    rm -f "$output".fifo
+    mkfifo "$output".fifo
+    tee -a /dev/stderr <"$output".fifo | sed 's/.*\r//;/^Recommended video bitrate/!d;s/^/   INFO: [mencoder] /' >>"$output".log &
+}
+###############################################################################
+check_abr () {
+        # abr permitted:
+        # ac3: ( 8000/11025/12000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
+        # ac3: (16000/22050/24000)    16 24 32 40 48 56 64 80 96 112 128     160     192 224 256 288 320
+        # ac3: (32000/44100/48000)          32 40 48 56 64 80 96 112 128     160     192 224 256     320     384     448 512 576 640
+        # mp3: ( 8000/11025/12000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
+        # mp3: (16000/22050/24000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
+        # mp3: (32000/44100/48000)          32 40 48 56 64 80 96 112 128     160     192 224 256     320
+        # mp2: ( 8000/11025/12000)
+        # mp2: (16000/22050/24000)  8 16 24 32 40 48 56 64 80 96 112 128 144 160
+        # mp2: (32000/44100/48000)          32    48 56 64 80 96 112 128     160     192 224 256     320     384
+        # mp1: ( 8000/11025/12000)
+        # mp1: (16000/22050/24000)          32    48 56 64 80 96 112 128 144 160 176 192 224 256
+        # mp1: (32000/44100/48000)          32          64    96     128     160     192 224 256 288 320 352 384 416 448
+    case $1 in
+        ac3)
+            case $2 in
+                8000|11025|12000)
+                    case $3 in
+                        8|16|24|32|40|48|56|64|80|96|112|128|144|160) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                16000|22050|24000)
+                    case $3 in
+                        16|24|32|40|48|56|64|80|96|112|128|160|192|224|256|288|320) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                32000|44100|48000)
+                    case $3 in
+                        32|40|48|56|64|80|96|112|128|160|192|224|256|320|384|448|512|576|640) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                *) return 1 ;;
+            esac
+            ;;
+        mp3)
+            case $2 in
+                8000|11025|12000|16000|22050|24000)
+                    case $3 in
+                        8|16|24|32|40|48|56|64|80|96|112|128|144|160) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                32000|44100|48000)
+                    case $3 in
+                        32|40|48|56|64|80|96|112|128|160|192|224|256|320) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                *) return 1 ;;
+            esac
+            ;;
+        mp2)
+            case $2 in
+                16000|22050|24000)
+                    case $3 in
+                        8|16|24|32|40|48|56|64|80|96|112|128|144|160) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                32000|44100|48000)
+                    case $3 in
+                        32|48|56|64|80|96|112|128|160|192|224|256|320|384) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                *) return 1 ;;
+            esac
+            ;;
+        mp1)
+            case $2 in
+                16000|22050|24000)
+                    case $3 in
+                        32|48|56|64|80|96|112|128|144|160|176|192|224|256) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                32000|44100|48000)
+                    case $3 in
+                        32|64|96|128|160|192|224|256|288|320|352|384|416|448) : ;;
+                        *) return 1 ;;
+                    esac
+                    ;;
+                *) return 1 ;;
+            esac
+            ;;
+        *) return 1 ;;
+    esac
+}
+###############################################################################
+debug_line () {
+    echo "--DEBUG: [$PROGNAME] $2($1) $(eval echo $(sed -n $1p "$PROGFILE" | sed 's/ |.*//;s/.>.*//;s/</\\\</'))" >>"$output".log
+}
+###############################################################################
+error_line () {
+    echo "--DEBUG: [$PROGNAME] $1"
+    echo "**ERROR: [$PROGNAME] there has been an error during the execution of the previous line, this should not happen"
+    echo "possible causes:"
+    echo "  0) missing or misspelled input stream"
+    echo "  1) the input stream is corrupted"
+    echo "       -> try a different input stream"
+    echo "  2) one of the options used has triggered a bug present only on your combination of architecture/compiler/distribution"
+    echo "       -> try to recompile MPlayer with a different compiler version or try another distribution"
+    if ((SVN)); then
+        echo "  3) one of the options used is not valid or is buggy for your SVN/unsupported version of MPlayer/MEncoder"
+        echo "       -> check MPlayer's man page and/or try a supported release of MPlayer"
+    fi
+    echo
+    echo "submit a bugreport if you think this is a bug in $PROGNAME"
+    exit $ret
+}
+###############################################################################
+check_mencoder_abr () {
+    local codec lib ASR
+    codec=([4]=mp2 mp3 ac3 mp2 aac)
+    lib=([4]=libavcodec libavcodec libavcodec lib${TOOLAME} libfaac)
+    ASR=${encode%%:*}
+    check_abr ${codec[ASR]} $1 $2 || ! echo "**ERROR: [$PROGNAME] ${lib[ASR]} does not support $2 kbps / $1 Hz for ${codec[ASR]}" || exit 1
+}
+###############################################################################
+is_film2pal () {
+    local a
+    a=$(mplayer -nocache "$@" -vo null -nosound -benchmark -frames 60 -noquiet 2>/dev/null | tr '\015' '\012' | tail | \
+      awk -F/ '$1~/^V:/{s=$1;t=$2}END{match(s,/ [0-9]+$/);n=substr(s,RSTART+1);match(t,/[0-9]+ /);m=substr(t,1,RLENGTH-1);r=n/m;if(r>1.02)print "24"}')
+    [[ $a ]] && a=$(mplayer -nocache "$@" -vo null -nosound -benchmark -frames 1500 -noquiet 2>/dev/null | tr '\015' '\012' | tail | \
+      awk -F/ '$1~/^V:/{s=$1;t=$2}END{match(s,/ [0-9]+$/);n=substr(s,RSTART+1);match(t,/[0-9]+ /);m=substr(t,1,RLENGTH-1);r=n/m;
+      if(r>1.042)print "24000/1001fps";if(r<1.042&&r>1.041)print "24fps"}')
+    echo "$a"
+}
+
+###############################################################################
+#### ERROR if some options conflict is detected part 2/2
+###############################################################################
+#### libavcodec codec/asr/abr
+#### libtoolame asr/abr
+#### libmp3lame asr
+#### no check is done on the other channel in case of multiaudio
+if [[ $encode = [2-8]:?:? ]]; then
+    if [[ $srate ]]; then
+        r=$srate
+    else
+        r=$(id_find ID_AUDIO_RATE "${MPLAYERINFO[@]}")
+        if [[ ! $r ]]; then
+            do_log "++ WARN: [$PROGNAME] failure to detect the audio sample rate of the input stream"
+            [[ ! $multiaudio && ! $audioid ]] && do_log "++ WARN: [$PROGNAME] if your source video does not have audio use -encode 0:${encode#*:}" || \
+              do_log "++ WARN: [$PROGNAME] probably is incorrect the audio stream selected with -${audioid:+aid}${multiaudio:+multiaudio}"
+        fi
+        if [[ $mpeg && ! $usespeed ]]; then
+            case $frameformat in
+                *VCD) ((r != 44100)) && do_log "++ WARN: [$PROGNAME] $frameformat standard requires 44100kHz audio, add -srate 44100" ;;
+                DVD)  ((r != 48000)) && do_log "++ WARN: [$PROGNAME] $frameformat standard requires 48000kHz audio, add -srate 48000" ;;
+            esac
+        fi
+    fi
+    if [[ $encode = [4-7]:?:? ]]; then
+        check_mencoder_abr "$r" ${AUDIOPASS##*=}
+    elif [[ $encode = 8:?:? ]]; then
+        case $r in
+            8000|11025|12000|16000|22050|24000|32000|44100|48000|64000|88200|96000) : ;;
+            *) echo "**ERROR: [$PROGNAME] libfaac does not support $r Hz sample rate" ; exit 1 ;;
+        esac
+    else
+        case $r in
+            8000|11025|12000|16000|22050|24000|32000|44100|48000) : ;;
+            *) echo "**ERROR: [$PROGNAME] libmp3lame does not support $r Hz sample rate" ; exit 1 ;;
+        esac
+    fi
+fi
+#### copy of non-MPEG audio in a VCD
+if [[ $step -gt 1 && $frameformat = VCD && $encode = 0:?:? && ( $mpeg || ${!audioformat} = copy ) && ! $testmca && ! $pictsrc ]]; then
+    a=$(id_find ID_AUDIO_CODEC "${MPLAYERINFO[@]}")
+    [[ $a != mp3 ]] && echo "**ERROR: [$PROGNAME] you cannot copy $a audio in a $frameformat" && exit 1
+fi
+#### mpegchannels > 2 only with ac3 and aac
+[[ $mpeg && ${mpegchannels:-2} -gt 2 && $encode = [2-57]:?:? ]] && CODEC=([2]=mp3 mp3 mp2 mp3 [7]=mp2) && \
+  echo "**ERROR: [$PROGNAME] audio codec ${CODEC[${encode%%:*}]} selected with -encode $encode do not support more than 2 audio channels" && exit 1
+###############################################################################
+#### set cleanup
+###############################################################################
+trap 'job_exit' 0
+CLEAN[${#CLEAN[*]}]="$output".fifo
+
+skip=0
+LG=1
+
+###############################################################################
+#### start the log file
+###############################################################################
+if [[ ! $resume ]] ; then
+    { if [[ $LOG ]]; then
+          echo "$LOG"
+      else
+          STARTTIME=$(pr_time)
+          echo "### LOG: $output $(pr_date)"
+      fi
+      echo -n "   INFO: [$PROGNAME] version $VERSION running in "
+      if ((${#TITLESET[*]})); then
+          echo -n "Titleset Mode"
+      else
+          if [[ $mpeg ]]; then
+              [[ $testmca ]] && echo -n "Testmca Mode" || echo -n "MPEG Mode"
+          fi
+      fi
+      echo "${cpu:+ (cpu=$cpu)}"
+      echo "   INFO: [$PROGNAME] command line: '${CMD[@]}'"
+    } >"$output".log
+fi
+
+###############################################################################
+#### WARNING if some requested tools are missing and can be replaced
+###############################################################################
+#### WARN
+if [[ $WARN ]]; then
+    echo -e "$WARN" >>"$output".log
+fi
+#### volume and audio copy
+if [[ $volume ]]; then
+    [[ $encode = 0:?:? && ( ${!audioformat} = copy || $step -eq 1 || $mpeg ) || ${!audioformat} = copy && ! $encode ]] && \
+      do_log "++ WARN: [$PROGNAME] you cannot modify the volume of the output audio stream if you are making a copy the input audio stream"
+fi
+#### cpu and bframes
+if [[ $cpu && $bframes ]]; then
+    ((bframes)) && do_log "++ WARN: [$PROGNAME] with bframes>0 the encoding will be faster with cpu=1"
+fi
+#### -usespeed
+if [[ $usespeed && ( $encode = 0:?:? || $encode = ?:0:? ) ]]; then
+    do_log "++ WARN: [$PROGNAME] -usespeed may not work if you do not encode both audio and video." && echo -n "Press return to proceed" && read
+fi
+#### total br
+[[ $encode != ?:0:? ]] && ((step>1&&abr*audiostream*1024/1000+vbr>MAXBR)) && \
+  do_log "++ WARN: [$PROGNAME] total video+audio bitrate ($vbr+$((abr*audiostream*1024/1000))kbps) exceed $frameformat specifications (${MAXBR}kbps)"
+#### -slideaudio/single picture
+if [[ $slideaudio && $slideaudio != /dev/null && $pictsrc ]]; then
+    ((${#PICTSRC[*]}!=1||$(ls ${PICTSRC[0]} | wc -l)!=1)) && \
+      do_log "++ WARN: [$PROGNAME] you should use only one source image if you use the option -slideaudio"
+fi
+
+###############################################################################
+#### dump some info in the log file
+###############################################################################
+{ VARS=(frameformat ${split:+split} vfr vbr abr asr ${mpegchannels:+mpegchannels} ${GOP:+GOP} audioformat) # audioformat must be the last
+  VARS[${#VARS[*]}]=${!VARS[${#VARS[*]}-1]}
+  [[ $volume && ! $encode ]] && VARS[${#VARS[*]}]=volume
+  echo -n "   MPEG: "
+  for ((i=0;i<${#VARS[*]};i++)) ; do
+      echo -n "${VARS[i]}:${!VARS[i]} "
+  done
+  echo -n "${multiaudio:+multiaudio:${multiaudio// /,} }"
+  echo -n "mpegencoder:$([ $mpeg ] && echo mencoder || echo mpeg2enc)"
+  [[ $mpegaspect ]] && echo -n " aspect:${ASPECT[mpegaspect]}"
+  [[ $cdi && $frameformat = VCD ]] && echo -n " CD-i"
+  [[ $telecine ]] && echo -n " telecine"
+  echo
+  VARS=(encode ${vcodec:+vcodec} ${volume:+volume} ${usesbr:+usesbr} ${avisplit:+avisplit} ${channels:+channels} AUDIOPASS VIDEOPASS PASS)
+  if [[ $encode ]]; then
+      echo -n "   $([ $mpeg ] && echo MPEG || echo \ AVI): "
+      for ((i=0;i<${#VARS[*]};i++)) ; do
+          echo -n "${VARS[i]}:${!VARS[i]} "
+      done
+      if ((PASS>1)); then
+          [[ $turbo ]] && echo -n "TURBO:on " || echo -n "TURBO:off "
+      fi
+      txt=
+      [[ $(echo $encode | cut -f 2 -d:) = 1 && $vcustom ]] && txt="libavcodec"
+      [[ ${encode%%:*} = 2 && $acustom ]] && txt=${txt:+${txt} and} && txt="$txt lame"
+      txt=${txt:+(custom ${txt} options)}
+      echo $txt
+  fi
+  [[ ! $resume ]] && { [[ $audioonly ]] && mp_identify "$audioonly" || mp_identify "${MPLAYERINFO[@]}" -frames 1 ; } | \
+    sed -n '/^ID_/s/^/   INFO: [identify] /p' | uniq
+  VARS=(${encode:+MENCODERARG} MPLAYERYUVOPT)
+  VARS=(${encode:+MENCODERARG})
+  for ((i=0;i<${#VARS[*]};i++)) ; do
+      s="INFO: \[${VARS[i]}] \${${VARS[i]}[*]}"
+      eval echo "\ \ \ $s"
+  done
+} >>"$output".log
+h_res=$(grep ID_VIDEO_WIDTH "$output".log | tail -1 | cut -f2 -d=)
+v_res=$(grep ID_VIDEO_HEIGHT "$output".log | tail -1 | cut -f2 -d=)
+if [[ $pictsrc ]]; then
+    v_res=$(mplayer -vo null "${MPLAYERINFO[@]}" -frames 1 2>/dev/null | awk '/^VO:/{print $3}' | head -n 1)
+    h_res=${v_res%x*}
+    v_res=${v_res#*x}
+fi
+[[ $mpeg && ${encode%,*} = ?:0:? ]] && H_RES=$h_res && V_RES=$v_res
+
+###############################################################################
+#### put the volume in DB
+###############################################################################
+if [[ $volume ]]; then
+    volume=$(awk -v a=$volume 'BEGIN{if(a>0) print 20*log(a)/log(10) ; else print 0}')
+    af=${af:--af }${af:+,}volume=$volume
+fi
+
+[[ ${mver:0:5} = 1.0rc ]] || SVN=1
+
+###############################################################################
+#### telecined (NTSC/PAL) MPEG copy/speed encoding change
+###############################################################################
+if [[ $mpeg && ( $encode = ?:0:? || $usespeed ) || $usespeed && ! $encode && $step -gt 1 ]]; then
+    FPS=($(grep ID_VIDEO_FPS "$output".log | cut -f2 -d=) [1]=23.976 24.000 25.000 29.970 30.000 50.000 59.940 60.000)
+    for ((i=1;i<9;i++)); do
+        a=$(awk -v a=${FPS[0]} -v b=${FPS[i]} 'BEGIN{if (sqrt((a-b)*(a-b))<.02) print b}')
+        if [[ $a ]]; then
+            if [[ ${FPS[0]} != ${FPS[i]} ]]; then
+                do_log "++ WARN: [$PROGNAME] input video frame rate is not exactly ${FPS[i]}fps"
+                FPS[0]=${FPS[i]}
+            fi
+            FPS[10]=$i
+            break
+        fi
+    done
+    [[ $usespeed && $i -eq 9 ]] && do_log "++ WARN: [$PROGNAME] input video frame rate is not a valid NTSC/PAL value; disabling -usespeed" && usespeed=
+
+    if [[ ${FPS[0]} = ${FPS[4]} || ${FPS[0]} = ${FPS[5]} ]]; then
+        FPS[9]=$(mplayer -nocache -quiet "${MPLAYERINFO[@]}" -vo null -nosound -benchmark -frames 60 2>/dev/null | awk '/^demux_mpg:/{print $2}')
+        [[ ${FPS[9]} = 24fps || ${FPS[9]} = 24000/1001fps ]] && FPS[10]=$((FPS[10]-3))
+    elif [[ ${FPS[0]} = ${FPS[3]} ]]; then
+        FPS[9]=$(is_film2pal "${MPLAYERINFO[@]}")
+        if [[ ${FPS[9]} ]]; then
+            [[ ${FPS[9]} = 24fps ]] && FPS[10]=2 || FPS[10]=1
+        fi
+    fi
+    if [[ $usespeed ]]; then
+        if ((vfr!=${FPS[10]})); then
+            NSPEEDCOEF=([1]=1001 1001 5 1001 1001 5 1001 25 1250 5 25 2500 5 1200 6 2 2400 12 1001 1001 2 1001 5 2000 2 1200 6 1001 )
+            MSPEEDCOEF=([1]=1000  960 4  800  480 2  400 24 1001 4 12 1001 2 1001 5 1 1001  5 1000  200 1  500 3 1001 1 1001 5 1000 )
+            DCOEF=([1]=-2 3 7 10 12 13 13)
+            if ((vfr>${FPS[10]})); then
+                #### black magic here ;-)
+                n=$((vfr+${FPS[10]}+${DCOEF[${FPS[10]}]}))
+                a=${NSPEEDCOEF[n]}/${MSPEEDCOEF[n]}
+            else
+                n=$((vfr+${FPS[10]}+${DCOEF[vfr]}))
+                a=${MSPEEDCOEF[n]}/${NSPEEDCOEF[n]}
+            fi
+            MENCODERARG=( -speed $a -srate $asr -af-adv force=1 "${MENCODERARG[@]}" )
+            MPLAYERYUVOPT=("${MPLAYERYUVOPT[@]}" -speed $a )
+            do_log "   INFO: [usespeed] using speed factor $a"
+        fi
+    elif [[ ${FPS[0]} = ${FPS[4]} || ${FPS[0]} = ${FPS[5]} || ${FPS[0]} = ${FPS[3]} ]]; then
+        if [[ ${FPS[9]} = 24fps || ${FPS[9]} = 24000/1001fps || $telesrc ]]; then
+            { echo -n "   INFO: [$PROGNAME] "
+              [[ ${FPS[9]} = 24fps || ${FPS[9]} = 24000/1001fps ]] && echo -n "detected" || echo -n "user selected"
+              [[ ${FPS[0]} = ${FPS[3]} ]] && echo -n " PAL" || echo -n " NTSC"
+              echo " telecined source"
+            } | tee -a "$output".log
+            [[ ${FPS[10]} = 1 ]] && MENCODERARG=( "${MENCODERARG[@]}" -ofps 24000/1001 -mc 0 ) || MENCODERARG=( "${MENCODERARG[@]}" -ofps 24 -mc 0 )
+        fi
+    fi
+fi
+
+###############################################################################
+#### scale and expand/crop to adapt the aspect ratio
+#### added rotation and overscan
+###############################################################################
+if [[ $mpegfixaspect && $step -gt 1 ]]; then
+    a=$(get_aspect "${MPLAYERINFO[@]}")
+    [[ ${a:0:9} = undefined ]] && a=$(awk -v a=$h_res -v b=$v_res 'BEGIN{printf("%f",a/b)}')
+    [[ $mpegaspect = 1 ]] && b=$(awk -v a=$H_RES -v b=$V_RES 'BEGIN{printf("%f",a/b)}') || b=${ASPECT[${mpegaspect:-2}]}
+    vfilter=$(awk -v a=$a -v A=$b -v W=$H_RES -v H=$V_RES -v crop=$mpegfixaspect -v i=${interlaced:-0} -v r=$rotate -v o=$overscan -v logfile="$(echo "$output" | sed 's/\\/\\\\/g')".log 'BEGIN{
+      ko=(1-o/100)
+      if(a==1.78||a==1.74)a=16/9
+      if(a==1.33||a==1.30)a=4/3
+      if(A=="4/3")A=4/3
+      if(A=="16/9")A=16/9
+      if(r!=""){
+        A=1/A
+        tmp=W
+        W=H
+        H=tmp
+      }
+      if(a>A&&crop==0||a<A&&crop==1){
+        Eh=A*H/a
+        Ew=W
+      }else{
+        Ew=W*a/A
+        Eh=H
+      }
+      Ew=2*int(Ew*ko/2+0.50)
+      Eh=2*int(Eh*ko/2+0.50)
+      printf("-vf scale=%d:%d",Ew,Eh)
+      printf("   INFO: [mpegfixaspect] -vf scale=%d:%d",Ew,Eh) >>logfile
+      if(i==1)printf(":1")
+      if(i==1)printf(":1") >>logfile
+      if(crop==0){
+        printf(",expand=%d:%d",W,H)
+        printf(",expand=%d:%d",W,H) >>logfile
+      }else{
+        printf(",crop=%d:%d",W,H)
+        printf(",crop=%d:%d",W,H) >>logfile
+      }
+      if(r!=""){
+        printf(",rotate=%d",r)
+        printf(",rotate=%d",r) >>logfile
+      }
+      if(o!=0) printf(" [overscan=%d]",o) >>logfile
+      printf("\n") >>logfile
+    }')
+    if [[ $mpeg ]]; then
+        for ((a=0;a<${#MENCODERARG[*]};a++)); do
+            if [[ ${MENCODERARG[a]} = -vf ]]; then
+                MENCODERARG[a+1]=$(echo ${MENCODERARG[a+1]} | sed 's/scale=[^,]*,//;s/^/'"${vfilter#-vf }"',/')
+            fi
+        done
+    fi
+fi
+
+###############################################################################
+#### warn for aspect ratio
+###############################################################################
+if [[ ( $mpeg && $encode != ?:0:? || ! $mpeg && $step -gt 1 ) && ! $mpegfixaspect && ${#TITLESET[*]} -eq 0 && ! $testmca ]]; then
+    a=$(get_aspect "${MPLAYERINFO[@]}")
+    [[ ${mpegaspect:-2} = 2 && $a != 1.33 && $a != 1.30 || ${mpegaspect:-2} = 3 && $a != 1.78 && $a != 1.74 || ${mpegaspect:-2} = 4 && $a != 2.21 ]] && \
+      do_log "++ WARN: [$PROGNAME] selected aspect ratio [${ASPECT[${mpegaspect:-2}]}] and source aspect ratio [$a] are different"
+fi
+
+###############################################################################
+#### dvd vobsub
+###############################################################################
+#### function to select the vobsub to extract
+next_vobsub_idx () {
+    if ((${#SID[*]})); then
+        if ((idx < ${#encsid[*]})); then
+            SID=(-sid ${encsid[idx]} -vobsuboutindex ${encsdx[idx]} ${encsla:+-vobsuboutid ${encsla[idx]}} -vobsubout "$output")
+            do_log "   INFO: [$PROGNAME] dumping subtitle ${encsid[idx]} to vobsub ${encsdx[idx]}${encsla:+ (${encsla[idx]})}"
+            idx=$((idx+1))
+        else
+            unset SID
+        fi
+    fi
+}
+#### turn on vobsub extraction if encsid is given
+if (( ${#encsid[*]} )) ; then
+    (( ${#encsdx[*]} )) || encsdx=( ${encsid[*]} )
+    idx=0
+    SID=(0000)
+    next_vobsub_idx
+else
+    unset SID
+fi
+status_bit sub || unset SID
+
+###############################################################################
+#### test condition "extra"
+###############################################################################
+IDACOD=$(grep "ID_AUDIO_CODEC" "$output".log | tail -1 | cut -f2 -d=)
+[[ $IDACOD = hwdts ]] && echo "**ERROR: [$PROGNAME] dts audio support missing in MPlayer" && \
+  echo "**ERROR: add dts support (libdts-0.0.2.tar.gz) or select a non dts stream" && \
+  echo "**ERROR: example:  -aid 128 (ac3), -aid 160 (lpcm), -aid 0 (mpeg)" && exit 1
+[[ $mpeg && ! $pictsrc && ( $encode = 1:?:? || $multiaudio || $encode = 0:?:? && $IDACOD != mp3 && $IDACOD != a52 && $IDACOD != faad ) ]] && extra=1 || \
+  extra=
+[[ $extra ]] && do_log "**ERROR: [$PROGNAME] output stream: unsupported audio codec $IDACOD" && exit 1
+
+CLEAN[${#CLEAN[*]}]="$output".tmp
+
+###############################################################################
+#### AVI/MPEG section
+###############################################################################
+if [[ $encode ]]; then
+    if status_bit avi ; then
+        find_sbr () {
+            local kv k ka
+            sleep 2
+            [[ $mpeg ]] && kv=9888 k=33 ka=1015 || kv=10000 k=0 ka=1011
+            if ((usesbr<=6)); then
+                sbr=$(awk '/for '"${SBR[usesbr-1]}"'MB CD/{print $NF}' <"$output".log)
+                [[ $sbr ]] && ((sbr<vbitrate)) && VIDEOPASS=${VIDEOPASS/vbitrate=$vbitrate:/vbitrate=$sbr:} && \
+                  do_log "   INFO: [mencoder] using vbitrate=$sbr"
+            else
+                #### usesbr is in MB
+                #### remind: 650-800,650-1400,800-1400
+                sbr[0]=650
+                sbr[1]=1400
+                sbr[2]=$(awk '/for '"${SBR[0]}"'MB CD/{print $NF}' <"$output".log)
+                sbr[3]=$(awk '/for '"${SBR[4]}"'MB CD/{print $NF}' <"$output".log)
+                [[ ${sbr[2]} && ${sbr[3]} ]] && \
+                  sbr[4]=$(((((usesbr*kv/10000-k)-(audiosize*ka/1000))*(sbr[3]-sbr[2])+sbr[1]*sbr[2]-sbr[0]*sbr[3])/(sbr[1]-sbr[0])))
+                [[ ${sbr[4]} ]] && ((sbr[4]<vbitrate && sbr[4]>0)) && VIDEOPASS=${VIDEOPASS/vbitrate=$vbitrate:/vbitrate=${sbr[4]}:} && \
+                  do_log "   INFO: [mencoder] using vbitrate=${sbr[4]}"
+            fi
+        }
+        AID=
+        if [[ ! $extra ]]; then
+            RAWVIDEO=( -o "$output".$SUF )
+        fi
+        #### start mencoder
+        PLOG=( -passlogfile "$output".avi2pass.log )
+        MSG=( -msglevel open=6:demuxer=6:demux=6 )
+        rm -f frameno.avi
+        [[ $encode = 0:?:? && ! $extra ]] && F= || F=$af
+            if [[ $usesbr && ! $extra ]]; then
+            ((DEBUG)) && debug_line $((LINENO+2)) "usesbr "
+            me_bit_log
+            mencoder         $OPTIONS -ovc frameno         -o /dev/null       "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F       &>"$output".fifo
+                find_sbr
+                next_vobsub_idx
+            fi
+        if ((PASS==1)); then
+            ((DEBUG)) && debug_line $((LINENO+2)) "PASS 1/$PASS"
+            me_log
+            mencoder         $OPTIONS $VIDEOPASS           "${RAWVIDEO[@]}"   "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${MSG[@]}" >"$output".fifo
+            next_vobsub_idx
+        else
+            #### N pass
+            CLEAN[${#CLEAN[*]}]="$output".avi2pass.log
+            ((DEBUG)) && debug_line $((LINENO+1)) "PASS 1/$PASS"
+            mencoder         $OPTIONS ${VIDEOPASS}:vpass=1$turbo -o /dev/null "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}"
+            next_vobsub_idx
+            if ((PASS==2)); then
+                ((DEBUG)) && debug_line $((LINENO+2)) "PASS 2/$PASS"
+                me_log
+                mencoder     $OPTIONS ${VIDEOPASS}:vpass=2 "${RAWVIDEO[@]}"   "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}" "${MSG[@]}" \
+                  >"$output".fifo
+                next_vobsub_idx
+            else
+                for ((a=2;a<PASS;a++)); do
+                    ((DEBUG)) && debug_line $((LINENO+1)) "PASS $a/$PASS"
+                    mencoder $OPTIONS ${VIDEOPASS}:vpass=3 -o /dev/null       "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}"
+                    next_vobsub_idx
+                done
+                ((DEBUG)) && debug_line $((LINENO+2)) "PASS $PASS/$PASS"
+                me_log
+                mencoder     $OPTIONS ${VIDEOPASS}:vpass=3 "${RAWVIDEO[@]}"   "${SID[@]}" "${MENCODERARG[@]}" $AID $AUDIOPASS $F "${PLOG[@]}" "${MSG[@]}" \
+                  >"$output".fifo
+                next_vobsub_idx
+            fi
+        fi
+        status_bit avi set
+    fi
+fi
+
+###############################################################################
+#### if there are still vobsub to dump, do it now
+###############################################################################
+while ((${#SID[*]})) ; do
+    ((DEBUG)) && debug_line $((LINENO+1)) vobsub
+    mencoder -ovc copy -o /dev/null $AID "${SID[@]}" "${MENCODERARG[@]}" -nosound
+    next_vobsub_idx
+done
+if status_bit sub ; then
+    if [[ -f $output.sub && -f $output.idx && ${#encsid[*]} -gt 0 ]]; then
+        #### reset the subtitles with the wrong timestamp
+        awk -v logfile="$(echo "$output" | sed 's/\\/\\\\/g')".log '{
+          if($1=="id:")id=" ("$0")"
+          if($1=="timestamp:"){
+            n=$2;
+            sub(/,/,"",n);
+            # convert the timestamp in seconds
+            m=3600*substr(n,1,index(n,":")-1);
+            sub(/[0-9]*:/,"",n);
+            m=m+60*substr(n,1,index(n,":")-1);
+            sub(/[0-9]*:/,"",n);
+            m=m+substr(n,1,index(n,":")-1);
+            sub(/[0-9]*:/,"",n);
+            m=m+n/1000;
+            # .002 is already ok
+            if(m+.004<t){
+              printf("++ WARN: [encsid] reset bad timestamp sequence: %s %s%s\n",gensub(/[^ ]* /,"",1,gensub(/,.*/,"",1,p)),substr($2,1,length($2)-1),id) >>logfile ;
+              id="";
+              p=gensub(/ [^ ]* /," 00:00:00:000, ",1,p)" #"p}
+            t=m}
+          else t=0;
+          if(NR>1)print p;
+          p=$0
+          }
+          END{print p}' <"$output".idx >"$output".idx.idx && mv "$output".idx.idx "$output".idx
+        status_bit sub set
+    fi
+fi
+
+###############################################################################
+#### if fast mode skip multiplexing
+###############################################################################
+if [[ $mpeg && $fast ]]; then
+    if status_bit mpg ; then
+        if [[ ! $extra ]]; then
+            rm -f "$output".mpg "${output}"[0-9][0-9].mpg
+            status_bit mpv set
+            status_bit mpa set
+            status_bit mpg set
+            mv "$output".$SUF "$output".mpg
+        fi
+    fi
+fi
+
+###############################################################################
+#### split the MPEG stream (for MPEG Mode)
+###############################################################################
+if status_bit spl ; then
+    #### split for MPEG Mode (MPEG-4 codec not supported)
+    #### MEncoder does not support split as does mpeg2enc/mplex
+    #### this solution is slow, but it seems quite accurate
+    if [[ $mpeg && $split && $vcodec != mpeg4 ]]; then
+        [[ ! $fast ]] && mv "$output"01.mpg "$output".mpg
+        file_size "$output".mpg
+        if ((split*1024*1024<fsize)); then
+            chunks=$((fsize/(split*1024*1024)+1))
+            CLEAN[${#CLEAN[*]}]="$output".framelist
+            mplayer "$output".mpg -vf framestep=I -vo null -nosound -benchmark 2>/dev/null | tr '\015' '\012' | \
+              awk '{if($1=="I!")print t,substr(f,1,index(f,"/")-1);t=$2;f=$3}' >"$output".framelist
+            m=0
+            #### removed -vc dummy
+            [[ $multiaudio ]] && a=$(mplayer -vo null -ao null -frames 1 -v "$output".mpg 2>/dev/null | awk '/==> Found audio str/{print $NF}' | \
+              sort -n | tr '\012' ',' | sed 's/,$/\n/')
+            for ((i=0;i<chunks;i++)); do
+                if ((i<chunks-1)); then
+                    n=$(mplayer "$output".mpg  -vf framestep=I -vo null -nosound -benchmark 2>/dev/null -sb $(((i+1)*split*1024*1024)) -frames 30 | \
+                      tr '\015' '\012' | awk '{if($1=="I!"){print t;exit};t=$2}')
+                    n=$(awk '/^'"$n"'/{print $2-1;exit}' <"$output".framelist) #should be -2
+                else
+                    n=
+                fi
+                ((DEBUG)) && debug_line $((LINENO+1)) "mpeg_split $((i+1))/$chunks"
+                "$PROGFILE" -norc "$output".mpg -o "$output"$(printf "%02d" $((i+1))) -mpegonly -mpeg -encode 0:0:1 -$(echo $frameformat| tr '[:upper:]' '[:lower:]') -nosplit -noshowlog -sb $((i*split*1024*1024)) ${n:+-frames $((n-m))} -a ${mpegaspect:-2} ${multiaudio:+-multiaudio $a} -mc 0
+                rm "$output"$(printf "%02d" $((i+1))).log
+                m=$n
+            done
+            rm "$output".mpg
+        else
+            mv "$output".mpg "$output"01.mpg
+        fi
+        status_bit spl set
+    fi
+fi
+
+################################################################################
+#### done
+################################################################################
+exit
+
--- a/TOOLS/mencvcd	Mon Jul 07 06:47:01 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,440 +0,0 @@
-#!/bin/sh
-#
-# Version:          0.2.2
-#
-# Licence:          GPL
-#
-# 2002/09/21        J�rgen Hammelmann <juergen.hammelmann@gmx.de>
-#
-# Script:           MPlayer Sources (DVD) to (S)VCD ripping and burning
-#
-# requires:         mplayer
-#                   mjpegtools
-#                   vcdimager
-#                   cdrdao
-#                   lame    (optionally)
-#                   toolame (optionally)
-#                   sox     (optionally)
-
-for exe in mplayer mpeg2enc mp2enc mplex yuvscaler ; do
-	if [ -z "`which $exe`" ]; then
-		echo "ERROR: $exe must be in your path $PATH!"
-		exit 1
-	fi
-done
-for exe in vcdimager lame cdrdao yuvdenoise sox toolame normalize; do
-        if [ -z "`which $exe`" ]; then
-                echo "WARNING: $exe is not found in your path $PATH!"
-	fi
-done
-
-################################################################################
-#
-# 2002/04/11        v0.1.0: first version
-# 2002/04/12        v0.1.1:
-# 2002/04/14        v0.1.2:
-#                     - handles now multiple vcd's
-#                     - support's mp3 audio as option
-#                     - use of mp2enc/lame instead of toolame because of support
-#                       of resampling and mp3
-# 2002/04/16        v0.1.3:
-#                     - new option "-burnonly"
-#                     - new option "-vbr"
-#                     - removes mpg file after mastering cd image
-#                       (mplayer can read bin images!)
-#                     - bugfixes
-# 2002/04/22        v0.1.4
-#                     - bugfixes / changes
-#                     - more options
-# 2002/05/06        v0.1.5
-#                     - new option "-norm"
-# 2002/05/08        v0.1.6
-#                     - bugfixes
-#                     - new option "-vfr"
-#                     - "-norm" renamed to "-vnorm"
-# 2002/05/15        v0.1.7
-#                     - bugfixes
-#                     - more help
-# 2002/05/26        v0.1.8
-#                     - new option "-sync"
-# 2002/06/19        v0.1.9
-#                     - new option "-mpgonly"
-# 2002/09/21        v0.1.10
-#                     - bug fixes
-#                     - tests now, if the commands are in path and give warnings
-#                       and errors.
-# 2002/11/01        v0.2
-#                     - bug fixes
-#                     - new options: "-sox", "-volume", "-toolame"
-#                     - renamed "-mpg" to "-mpegsrc"
-#                     - default cd size changed to 800mb
-# 2002/11/18        v0.2.1
-#                     - aspect ratio for vcd's, too
-#                     - pulldown mode...
-# 2002/12/01        v0.2.2
-#                     - -normalize
-#
-################################################################################
-#
-# global config section, change them to your needs!
-
-TMPDIR="." # path to directory for creating temporary files, recommended 2-3GB space
-
-CDDRV="generic-mmc"    # cdrdao: cdwriter driver
-CDDEV="--device 0,1,0" # or comment out and create link /dev/cdrecorder
-                       # to your cdwriter dev
-CDMAXSIZE=800
-
-################################################################################
-AUDIO="audiodump.wav"
-VIDEO="stream.yuv"
-VCDMODE=2
-SVCDMODE=5
-################################################################################
-
-usage() {
-   echo "Usage: $HOWCALLED <basename> [$HOWCALLED options] [mplayer options]"
-   echo
-   echo "   <basename> is used as basename of the resulting mpg/bin files."
-   echo
-   echo "For mplayer options see mplayer help and manual."
-   echo
-   echo "$HOWCALLED options:"
-   echo
-   echo "-?|-h           help."
-   echo "-a <n>          sets the aspect ratio (for SVCD):"
-   echo "                1 - 1:1 display"
-   echo "                2 - 4:3 display"
-   echo "                3 - 16:9 display"
-   echo "                4 - 2.21:1 display"
-   echo "-abr <n>        output audio bitrate in kbs [224]."
-   echo "-asr <n>        output audio sample rate in Hz [44100]."
-   echo "-blank          cleans cd-rw before burning."
-   echo "-burnonly       burn only the premastered <name>*.cue/<name>*.bin images."
-   echo "-cdsize <n>     maximal size of cd images [800 = 80min raw cd]."
-   echo "-denoise        denoises mpeg stream."
-   echo "-mp3            outputs audio in mp3 instead of mp2 format."
-   echo "-mpegsrc        don't encode from source, multiplex/burn the "
-   echo "                encoded mpg stream."
-   echo "-mpgonly        do only encoding to mpeg 1/2 format."
-   echo "-noburn         disables burning."
-   echo "-normalize      use 'normalize'."
-   echo "-overburn       enables overburning a cd."
-   echo "-pulldown       enable pulldown mode in output."
-   echo "-ratio <s>      output ratio size of frames, see yuvscaler (1)."
-   echo "-size <X>x<Y>   sets output size of frames."
-   echo "-sox            use sox for audio resampling."
-   echo "-svcdout        encode to SVCD format [VCD default]."
-   echo "-sync <n>       set the presentation timestamp offset of video"
-   echo "                stream w.r.t. audio stream (video-audio) in mSec."
-   echo "-toolame        use toolame instead of mp2enc."
-   echo "-v <volume>     change  amplitude  (floating  point); less than 1.0"
-   echo "                decreases, greater than 1.0 increases. Use that only"
-   echo "                together with sox!"
-   echo "-vbr <n>        output video bitrate in kbs [VCD:1152, SVCD:2500]."
-   echo "-vfr <n>        sets the frame-rate of the output-stream. Currently"
-   echo "                only the standard MPEG rates are supported:"
-   echo "                0 - illegal"
-   echo "                1 - 24000.0/1001.0 (NTSC 3:2 pulldown converted FILM)"
-   echo "                2 - 24.0 (NATIVE FILM)"
-   echo "                3 - 25.0 (PAL/SECAM VIDEO / converted FILM)"
-   echo "                4 - 30000.0/1001.0 (NTSC VIDEO)"
-   echo "                5 - 30.0"
-   echo "                6 - 50.0 (PAL FIELD RATE)"
-   echo "                7 - 60000.0/1001.0 (NTSC FIELD RATE)"
-   echo "                8 - 60.0"
-   echo "-vnorm <p|n|s>  sets the input video norm p, n or s:"
-   echo "                forces the input stream to be treated as PAL|NTSC|SECAM"
-   echo "                regardless  of  what the stream header might suggest."
-   echo "-w              outputs in wide screen format 16:9."
-   echo
-   echo "examples:"
-   echo
-   echo "'$HOWCALLED teneriffa teneriffa.avi'"
-   echo "this creates a VCD from an avi file."
-   echo
-   echo "'$HOWCALLED crazy dvd://3 -w':"
-   echo "encodes and burns dvd title 3 to VCD in 16:9."
-   echo
-   echo "'$HOWCALLED carter dvd://1 -sid 0 -aid 128 -ss 3:00 -frames 1500 \\"
-   echo "        -noburn -vnorm n -vfr 1':"
-   echo "this encodes 1500 frames of dvd title 1 with subtitle 0 and audio stream"
-   echo "128 starting from 3:00 with frame rate 29.97 fps and input video norm NTSC"
-   echo "and output frame rate 23.98 fps because of the 3:2 pulldown method in NTSC."
-   echo
-   echo "'$HOWCALLED bj -size 640x272 -vf expand=640:480:0:104:0 \\"
-   echo "        -cdsize 645 -noburn bj.avi'"
-   echo "this example above shows you, how to deal with movies which are not"
-   echo "created with aspect ratios of 4:3 or 16:9."
-}
-
-HOWCALLED=`basename $0`
-if [ $# -le 1 ]; then
-   usage
-   exit 1
-fi
-case $1 in
-   -*)
-      usage
-      exit 1
-   ;;
-   *)
-      NAME=$1
-      shift 1
-   ;;
-esac
-
-cd $TMPDIR
-rm -f $VIDEO
-rm -f $AUDIO
-# create a named pipe for video stream
-mkfifo -m 660 $VIDEO
-
-# some inits
-sub=""
-size=""
-aratio=""
-ratio=""
-params=""
-wide=""
-blank=0
-burn=1
-burnonly=0
-mp3=0
-mpgonly=0
-mkstream=1
-abr=224
-abrset=0
-asr=44100
-vbr=1152
-vbrset=0
-denoise="cat -"
-vnorm="VCD"
-mplexnorm="-f $VCDMODE -m 1 -V -b 46"
-imaget="-t vcd2"
-yuvin=""
-framerate=""
-sync=""
-sox=0
-toolame=0
-volume="1.0"
-overburn=""
-pd=""
-norm=0
-
-while [ "$1"x != "x" ]; do
-   case $1 in
-      -a)
-        aratio="-a $2"
-	shift 1
-        ;;
-      -w)
-      	wide="-M WIDE2STD"
-	;;
-      -h|-?)
-        usage
-        exit 0
-	;;
-      -abr)
-      	abr=$2
-        abrset=1
-	shift 1
-	;;
-      -asr)
-        asr=$2
-        shift 1
-        ;;
-      -cdsize)
-        CDMAXSIZE=$2
-        shift 1
-        ;;
-      -blank)
-      	blank=1
-	;;
-      -noburn)
-        burn=0
-	;;
-      -burnonly)
-        burnonly=1
-	burn=1
-	;;
-      -overburn)
-      	overburn="--overburn"
-	;;
-      -pulldown)
-        pd="-p"
-        ;;
-      -vfr)
-        framerate="-F $2"
-	shift 1
-	;;
-      -mp3)
-        mp3=1
-        ;;
-      -mpegsrc)
-      	mkstream=0
-	;;
-      -mpgonly)
-        mpgonly=1
-	;;
-      -normalize)
-        norm=1
-	;;
-      -vnorm)
-        yuvin="-n $2"
-	shift 1
-	;;
-      -volume)
-        volume="$2"
-	shift 1
-	;;
-      -denoise)
-        denoise="yuvdenoise"
-        ;;
-      -ratio)
-        ratio=$2
-        shift 1
-        ;;
-      -sid) # mplayer option: have to set vf expand, too!!!
-        sub="-vf pp,expand=-1:-1:-1:-1:1 -sid $2"
-        shift 1
-        ;;
-      -size)
-        size=$2
-        shift 1
-        ;;
-      -svcdout)
-        vnorm="SVCD"
-	;;
-      -sync)
-        sync="-O $2"
-	shift 1
-	;;
-      -sox)
-        sox=1
-	;;
-      -toolame)
-        toolame=1
-	;;
-      -vbr)
-        vbr=$2
-        vbrset=1
-	shift 1
-	;;
-      *)
-	params="$params $1"
-	;;
-   esac
-   shift 1
-done
-
-# some configs
-mpegnorm="-f $VCDMODE -b $vbr -B 260 -V 46"
-if [ "$vnorm" = "SVCD" ]; then
-   [ $vbrset -eq 0 ] && vbr=2500
-   mplexnorm="-f $SVCDMODE -m 2 -V -b 230"
-   mpegnorm="-f $SVCDMODE -b $vbr -B 260 -V 230"
-   imaget="-t svcd"
-fi
-
-# ratio overwrites wide sizing, size overwrites default frame size
-[ -n "$ratio" ] && wide="-M $ratio"
-[ -n "$size" ] && size="-O SIZE_$size"
-
-# with mp3 audio set the default audio bitrate to 128 kbs
-[ $mp3 -eq 1 -a $abrset -eq 0 ] && abr=128
-
-# audio sample rate in kHz
-((a=$asr / 1000))
-((b=$asr % 1000))
-[ $b -le 9 ] && b="00$b00"
-[ $b -le 99 ] && b="0$b00"
-kasr="$a.$b"
-
-# start de-/encoding
-if [ $burnonly -eq 0 ]; then
-   # encode streams
-   if [ $mkstream -eq 1 ]; then
-      # start mplayer
-      command="mplayer -noframedrop -vo yuv4mpeg -ao pcm:waveheader -v -osdlevel 0 $sub $params"
-      echo "$command"
-      $command &
-
-      # mjpegtools
-      ($denoise < $VIDEO | \
-         yuvscaler -v 0 $wide -O $vnorm $size $yuvin | \
-         mpeg2enc -v 0 -s $mpegnorm $aratio -S $CDMAXSIZE -g 6 -G 15 -r 16 \
-	          $pd $framerate $yuvin -4 2 -2 1 -o $NAME.mpv) &
-
-      # wait for finishing the subprocesses
-      wait
-
-      # normalize sound
-      [ $norm -eq 1 ] && (echo "normalizing sound..."; normalize $AUDIO)
-
-      # do resampling with sox
-      if [ $sox -ne 0 ]; then
-	echo "wait, do resampling with sox..."
-	sox $AUDIO -v $volume -r $asr $NAME.wav resample -qs
-	mv -f $NAME.wav $AUDIO
-      fi
-
-      if [ $toolame -ne 0 -a $mp3 -eq 0 ]; then
-	# do mp2 encoding with toolame
-	echo "wait, encoding to mp2 audio with toolame..."
-	toolame -b $abr $AUDIO
-	mv -f `basename $AUDIO .wav`.mp2 $NAME.mpa
-      elif [ $toolame -eq 0 -a $mp3 -eq 0 ]; then
-        # mp2enc/lame can't read audiodump.wav directly from named pipe,
-        # we have to read the whole file.
-	echo "wait, encoding to mp2 audio with mp2enc..."
-        mp2enc -b $abr -r $asr -o $NAME.mpa < $AUDIO
-      elif [ $mp3 -ne 0 ]; then
-	echo "wait, encoding to mp3 audio with lame..."
-        lame -b $abr --resample $kasr - $NAME.mpa < $AUDIO
-      fi
-   fi
-
-   # remove wav file, won't need anymore!
-   rm -f $AUDIO
-
-   # multiplex streams
-   [ -f $NAME.mpv -a -f $NAME.mpa ] || exit 1
-   rm -f ${NAME}*.mpg
-   mplex $mplexnorm $sync $NAME.mpv $NAME.mpa -o ${NAME}%d.mpg
-
-   # remove pipe, won't need anymore!
-   rm -f $VIDEO
-
-   # should i create only the mpeg file?
-   [ $mpgonly -eq 1 ] && exit 0
-
-   # create cd images
-   for mpg in ${NAME}*.mpg; do
-      [ -f $mpg ] || exit 1
-      cue="`basename $mpg .mpg`.cue"
-      bin="`basename $mpg .mpg`.bin"
-      rm -f $cue $bin
-      vcdimager $imaget -c $cue -b $bin $mpg
-      [ -f $bin -a -f $cue ] && rm -f $mpg
-   done
-
-# end of streaming/mastering
-fi
-
-# burn the (s)vcd's
-[ $burn -eq 0 ] && exit 0
-
-for cue in ${NAME}*.cue; do
-   bin="`basename $cue .cue`.bin"
-   [ -f $bin -a -f $cue ] || exit 1
-
-   echo "please insert a cd in your cdwriter, after a keypress we start:"
-   read -n 1 i
-
-   if [ $blank -eq 1 ]; then
-      cdrdao blank --reload $CDDEV --driver $CDDRV --blank-mode minimal
-   fi
-   cdrdao write $overburn --reload $CDDEV --driver $CDDRV $cue
-done
-exit 0
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TOOLS/mencvcd.sh	Mon Jul 07 09:30:22 2008 +0000
@@ -0,0 +1,440 @@
+#!/bin/sh
+#
+# Version:          0.2.2
+#
+# Licence:          GPL
+#
+# 2002/09/21        J�rgen Hammelmann <juergen.hammelmann@gmx.de>
+#
+# Script:           MPlayer Sources (DVD) to (S)VCD ripping and burning
+#
+# requires:         mplayer
+#                   mjpegtools
+#                   vcdimager
+#                   cdrdao
+#                   lame    (optionally)
+#                   toolame (optionally)
+#                   sox     (optionally)
+
+for exe in mplayer mpeg2enc mp2enc mplex yuvscaler ; do
+	if [ -z "`which $exe`" ]; then
+		echo "ERROR: $exe must be in your path $PATH!"
+		exit 1
+	fi
+done
+for exe in vcdimager lame cdrdao yuvdenoise sox toolame normalize; do
+        if [ -z "`which $exe`" ]; then
+                echo "WARNING: $exe is not found in your path $PATH!"
+	fi
+done
+
+################################################################################
+#
+# 2002/04/11        v0.1.0: first version
+# 2002/04/12        v0.1.1:
+# 2002/04/14        v0.1.2:
+#                     - handles now multiple vcd's
+#                     - support's mp3 audio as option
+#                     - use of mp2enc/lame instead of toolame because of support
+#                       of resampling and mp3
+# 2002/04/16        v0.1.3:
+#                     - new option "-burnonly"
+#                     - new option "-vbr"
+#                     - removes mpg file after mastering cd image
+#                       (mplayer can read bin images!)
+#                     - bugfixes
+# 2002/04/22        v0.1.4
+#                     - bugfixes / changes
+#                     - more options
+# 2002/05/06        v0.1.5
+#                     - new option "-norm"
+# 2002/05/08        v0.1.6
+#                     - bugfixes
+#                     - new option "-vfr"
+#                     - "-norm" renamed to "-vnorm"
+# 2002/05/15        v0.1.7
+#                     - bugfixes
+#                     - more help
+# 2002/05/26        v0.1.8
+#                     - new option "-sync"
+# 2002/06/19        v0.1.9
+#                     - new option "-mpgonly"
+# 2002/09/21        v0.1.10
+#                     - bug fixes
+#                     - tests now, if the commands are in path and give warnings
+#                       and errors.
+# 2002/11/01        v0.2
+#                     - bug fixes
+#                     - new options: "-sox", "-volume", "-toolame"
+#                     - renamed "-mpg" to "-mpegsrc"
+#                     - default cd size changed to 800mb
+# 2002/11/18        v0.2.1
+#                     - aspect ratio for vcd's, too
+#                     - pulldown mode...
+# 2002/12/01        v0.2.2
+#                     - -normalize
+#
+################################################################################
+#
+# global config section, change them to your needs!
+
+TMPDIR="." # path to directory for creating temporary files, recommended 2-3GB space
+
+CDDRV="generic-mmc"    # cdrdao: cdwriter driver
+CDDEV="--device 0,1,0" # or comment out and create link /dev/cdrecorder
+                       # to your cdwriter dev
+CDMAXSIZE=800
+
+################################################################################
+AUDIO="audiodump.wav"
+VIDEO="stream.yuv"
+VCDMODE=2
+SVCDMODE=5
+################################################################################
+
+usage() {
+   echo "Usage: $HOWCALLED <basename> [$HOWCALLED options] [mplayer options]"
+   echo
+   echo "   <basename> is used as basename of the resulting mpg/bin files."
+   echo
+   echo "For mplayer options see mplayer help and manual."
+   echo
+   echo "$HOWCALLED options:"
+   echo
+   echo "-?|-h           help."
+   echo "-a <n>          sets the aspect ratio (for SVCD):"
+   echo "                1 - 1:1 display"
+   echo "                2 - 4:3 display"
+   echo "                3 - 16:9 display"
+   echo "                4 - 2.21:1 display"
+   echo "-abr <n>        output audio bitrate in kbs [224]."
+   echo "-asr <n>        output audio sample rate in Hz [44100]."
+   echo "-blank          cleans cd-rw before burning."
+   echo "-burnonly       burn only the premastered <name>*.cue/<name>*.bin images."
+   echo "-cdsize <n>     maximal size of cd images [800 = 80min raw cd]."
+   echo "-denoise        denoises mpeg stream."
+   echo "-mp3            outputs audio in mp3 instead of mp2 format."
+   echo "-mpegsrc        don't encode from source, multiplex/burn the "
+   echo "                encoded mpg stream."
+   echo "-mpgonly        do only encoding to mpeg 1/2 format."
+   echo "-noburn         disables burning."
+   echo "-normalize      use 'normalize'."
+   echo "-overburn       enables overburning a cd."
+   echo "-pulldown       enable pulldown mode in output."
+   echo "-ratio <s>      output ratio size of frames, see yuvscaler (1)."
+   echo "-size <X>x<Y>   sets output size of frames."
+   echo "-sox            use sox for audio resampling."
+   echo "-svcdout        encode to SVCD format [VCD default]."
+   echo "-sync <n>       set the presentation timestamp offset of video"
+   echo "                stream w.r.t. audio stream (video-audio) in mSec."
+   echo "-toolame        use toolame instead of mp2enc."
+   echo "-v <volume>     change  amplitude  (floating  point); less than 1.0"
+   echo "                decreases, greater than 1.0 increases. Use that only"
+   echo "                together with sox!"
+   echo "-vbr <n>        output video bitrate in kbs [VCD:1152, SVCD:2500]."
+   echo "-vfr <n>        sets the frame-rate of the output-stream. Currently"
+   echo "                only the standard MPEG rates are supported:"
+   echo "                0 - illegal"
+   echo "                1 - 24000.0/1001.0 (NTSC 3:2 pulldown converted FILM)"
+   echo "                2 - 24.0 (NATIVE FILM)"
+   echo "                3 - 25.0 (PAL/SECAM VIDEO / converted FILM)"
+   echo "                4 - 30000.0/1001.0 (NTSC VIDEO)"
+   echo "                5 - 30.0"
+   echo "                6 - 50.0 (PAL FIELD RATE)"
+   echo "                7 - 60000.0/1001.0 (NTSC FIELD RATE)"
+   echo "                8 - 60.0"
+   echo "-vnorm <p|n|s>  sets the input video norm p, n or s:"
+   echo "                forces the input stream to be treated as PAL|NTSC|SECAM"
+   echo "                regardless  of  what the stream header might suggest."
+   echo "-w              outputs in wide screen format 16:9."
+   echo
+   echo "examples:"
+   echo
+   echo "'$HOWCALLED teneriffa teneriffa.avi'"
+   echo "this creates a VCD from an avi file."
+   echo
+   echo "'$HOWCALLED crazy dvd://3 -w':"
+   echo "encodes and burns dvd title 3 to VCD in 16:9."
+   echo
+   echo "'$HOWCALLED carter dvd://1 -sid 0 -aid 128 -ss 3:00 -frames 1500 \\"
+   echo "        -noburn -vnorm n -vfr 1':"
+   echo "this encodes 1500 frames of dvd title 1 with subtitle 0 and audio stream"
+   echo "128 starting from 3:00 with frame rate 29.97 fps and input video norm NTSC"
+   echo "and output frame rate 23.98 fps because of the 3:2 pulldown method in NTSC."
+   echo
+   echo "'$HOWCALLED bj -size 640x272 -vf expand=640:480:0:104:0 \\"
+   echo "        -cdsize 645 -noburn bj.avi'"
+   echo "this example above shows you, how to deal with movies which are not"
+   echo "created with aspect ratios of 4:3 or 16:9."
+}
+
+HOWCALLED=`basename $0`
+if [ $# -le 1 ]; then
+   usage
+   exit 1
+fi
+case $1 in
+   -*)
+      usage
+      exit 1
+   ;;
+   *)
+      NAME=$1
+      shift 1
+   ;;
+esac
+
+cd $TMPDIR
+rm -f $VIDEO
+rm -f $AUDIO
+# create a named pipe for video stream
+mkfifo -m 660 $VIDEO
+
+# some inits
+sub=""
+size=""
+aratio=""
+ratio=""
+params=""
+wide=""
+blank=0
+burn=1
+burnonly=0
+mp3=0
+mpgonly=0
+mkstream=1
+abr=224
+abrset=0
+asr=44100
+vbr=1152
+vbrset=0
+denoise="cat -"
+vnorm="VCD"
+mplexnorm="-f $VCDMODE -m 1 -V -b 46"
+imaget="-t vcd2"
+yuvin=""
+framerate=""
+sync=""
+sox=0
+toolame=0
+volume="1.0"
+overburn=""
+pd=""
+norm=0
+
+while [ "$1"x != "x" ]; do
+   case $1 in
+      -a)
+        aratio="-a $2"
+	shift 1
+        ;;
+      -w)
+      	wide="-M WIDE2STD"
+	;;
+      -h|-?)
+        usage
+        exit 0
+	;;
+      -abr)
+      	abr=$2
+        abrset=1
+	shift 1
+	;;
+      -asr)
+        asr=$2
+        shift 1
+        ;;
+      -cdsize)
+        CDMAXSIZE=$2
+        shift 1
+        ;;
+      -blank)
+      	blank=1
+	;;
+      -noburn)
+        burn=0
+	;;
+      -burnonly)
+        burnonly=1
+	burn=1
+	;;
+      -overburn)
+      	overburn="--overburn"
+	;;
+      -pulldown)
+        pd="-p"
+        ;;
+      -vfr)
+        framerate="-F $2"
+	shift 1
+	;;
+      -mp3)
+        mp3=1
+        ;;
+      -mpegsrc)
+      	mkstream=0
+	;;
+      -mpgonly)
+        mpgonly=1
+	;;
+      -normalize)
+        norm=1
+	;;
+      -vnorm)
+        yuvin="-n $2"
+	shift 1
+	;;
+      -volume)
+        volume="$2"
+	shift 1
+	;;
+      -denoise)
+        denoise="yuvdenoise"
+        ;;
+      -ratio)
+        ratio=$2
+        shift 1
+        ;;
+      -sid) # mplayer option: have to set vf expand, too!!!
+        sub="-vf pp,expand=-1:-1:-1:-1:1 -sid $2"
+        shift 1
+        ;;
+      -size)
+        size=$2
+        shift 1
+        ;;
+      -svcdout)
+        vnorm="SVCD"
+	;;
+      -sync)
+        sync="-O $2"
+	shift 1
+	;;
+      -sox)
+        sox=1
+	;;
+      -toolame)
+        toolame=1
+	;;
+      -vbr)
+        vbr=$2
+        vbrset=1
+	shift 1
+	;;
+      *)
+	params="$params $1"
+	;;
+   esac
+   shift 1
+done
+
+# some configs
+mpegnorm="-f $VCDMODE -b $vbr -B 260 -V 46"
+if [ "$vnorm" = "SVCD" ]; then
+   [ $vbrset -eq 0 ] && vbr=2500
+   mplexnorm="-f $SVCDMODE -m 2 -V -b 230"
+   mpegnorm="-f $SVCDMODE -b $vbr -B 260 -V 230"
+   imaget="-t svcd"
+fi
+
+# ratio overwrites wide sizing, size overwrites default frame size
+[ -n "$ratio" ] && wide="-M $ratio"
+[ -n "$size" ] && size="-O SIZE_$size"
+
+# with mp3 audio set the default audio bitrate to 128 kbs
+[ $mp3 -eq 1 -a $abrset -eq 0 ] && abr=128
+
+# audio sample rate in kHz
+((a=$asr / 1000))
+((b=$asr % 1000))
+[ $b -le 9 ] && b="00$b00"
+[ $b -le 99 ] && b="0$b00"
+kasr="$a.$b"
+
+# start de-/encoding
+if [ $burnonly -eq 0 ]; then
+   # encode streams
+   if [ $mkstream -eq 1 ]; then
+      # start mplayer
+      command="mplayer -noframedrop -vo yuv4mpeg -ao pcm:waveheader -v -osdlevel 0 $sub $params"
+      echo "$command"
+      $command &
+
+      # mjpegtools
+      ($denoise < $VIDEO | \
+         yuvscaler -v 0 $wide -O $vnorm $size $yuvin | \
+         mpeg2enc -v 0 -s $mpegnorm $aratio -S $CDMAXSIZE -g 6 -G 15 -r 16 \
+	          $pd $framerate $yuvin -4 2 -2 1 -o $NAME.mpv) &
+
+      # wait for finishing the subprocesses
+      wait
+
+      # normalize sound
+      [ $norm -eq 1 ] && (echo "normalizing sound..."; normalize $AUDIO)
+
+      # do resampling with sox
+      if [ $sox -ne 0 ]; then
+	echo "wait, do resampling with sox..."
+	sox $AUDIO -v $volume -r $asr $NAME.wav resample -qs
+	mv -f $NAME.wav $AUDIO
+      fi
+
+      if [ $toolame -ne 0 -a $mp3 -eq 0 ]; then
+	# do mp2 encoding with toolame
+	echo "wait, encoding to mp2 audio with toolame..."
+	toolame -b $abr $AUDIO
+	mv -f `basename $AUDIO .wav`.mp2 $NAME.mpa
+      elif [ $toolame -eq 0 -a $mp3 -eq 0 ]; then
+        # mp2enc/lame can't read audiodump.wav directly from named pipe,
+        # we have to read the whole file.
+	echo "wait, encoding to mp2 audio with mp2enc..."
+        mp2enc -b $abr -r $asr -o $NAME.mpa < $AUDIO
+      elif [ $mp3 -ne 0 ]; then
+	echo "wait, encoding to mp3 audio with lame..."
+        lame -b $abr --resample $kasr - $NAME.mpa < $AUDIO
+      fi
+   fi
+
+   # remove wav file, won't need anymore!
+   rm -f $AUDIO
+
+   # multiplex streams
+   [ -f $NAME.mpv -a -f $NAME.mpa ] || exit 1
+   rm -f ${NAME}*.mpg
+   mplex $mplexnorm $sync $NAME.mpv $NAME.mpa -o ${NAME}%d.mpg
+
+   # remove pipe, won't need anymore!
+   rm -f $VIDEO
+
+   # should i create only the mpeg file?
+   [ $mpgonly -eq 1 ] && exit 0
+
+   # create cd images
+   for mpg in ${NAME}*.mpg; do
+      [ -f $mpg ] || exit 1
+      cue="`basename $mpg .mpg`.cue"
+      bin="`basename $mpg .mpg`.bin"
+      rm -f $cue $bin
+      vcdimager $imaget -c $cue -b $bin $mpg
+      [ -f $bin -a -f $cue ] && rm -f $mpg
+   done
+
+# end of streaming/mastering
+fi
+
+# burn the (s)vcd's
+[ $burn -eq 0 ] && exit 0
+
+for cue in ${NAME}*.cue; do
+   bin="`basename $cue .cue`.bin"
+   [ -f $bin -a -f $cue ] || exit 1
+
+   echo "please insert a cd in your cdwriter, after a keypress we start:"
+   read -n 1 i
+
+   if [ $blank -eq 1 ]; then
+      cdrdao blank --reload $CDDEV --driver $CDDRV --blank-mode minimal
+   fi
+   cdrdao write $overburn --reload $CDDEV --driver $CDDRV $cue
+done
+exit 0
--- a/TOOLS/midentify	Mon Jul 07 06:47:01 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# This is a wrapper around the -identify functionality.
-# It is supposed to escape the output properly, so it can be easily
-# used in shellscripts by 'eval'ing the output of this script.
-#
-# Written by Tobias Diedrich <ranma+mplayer@tdiedrich.de>
-# Licensed under GNU GPL.
-
-if [ -z "$1" ]; then
-	echo "Usage: midentify <file> [<file> ...]"
-	exit 1
-fi
-
-mplayer -vo null -ao null -frames 0 -identify "$@" 2>/dev/null |
-	sed -ne '/^ID_/ {
-	                  s/[]()|&;<>`'"'"'\\!$" []/\\&/g;p
-	                }'
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TOOLS/midentify.sh	Mon Jul 07 09:30:22 2008 +0000
@@ -0,0 +1,18 @@
+#!/bin/sh
+#
+# This is a wrapper around the -identify functionality.
+# It is supposed to escape the output properly, so it can be easily
+# used in shellscripts by 'eval'ing the output of this script.
+#
+# Written by Tobias Diedrich <ranma+mplayer@tdiedrich.de>
+# Licensed under GNU GPL.
+
+if [ -z "$1" ]; then
+	echo "Usage: midentify.sh <file> [<file> ...]"
+	exit 1
+fi
+
+mplayer -vo null -ao null -frames 0 -identify "$@" 2>/dev/null |
+	sed -ne '/^ID_/ {
+	                  s/[]()|&;<>`'"'"'\\!$" []/\\&/g;p
+	                }'
--- a/TOOLS/mpconsole	Mon Jul 07 06:47:01 2008 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,12 +0,0 @@
-#!/bin/sh
-# Script to run mplayer on the console (fbdev/mga_vid/etc) without
-# the console text and/or flashing cursor getting in the way.
-# Written by Rich Felker.
-
-trap "tput cnorm ; exit 1" SIGQUIT SIGINT EXIT
-res=`PATH="$PATH:/usr/sbin" fbset | grep geometry | sed 's/^ *//'`
-width=`echo "$res" | cut -d' ' -f2`
-height=`echo "$res" | cut -d' ' -f3`
-tput civis
-clear
-mplayer -vo mga -screenw "$width" -screenh "$height" "$@" >/dev/null 2>&1
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TOOLS/mpconsole.sh	Mon Jul 07 09:30:22 2008 +0000
@@ -0,0 +1,12 @@
+#!/bin/sh
+# Script to run mplayer on the console (fbdev/mga_vid/etc) without
+# the console text and/or flashing cursor getting in the way.
+# Written by Rich Felker.
+
+trap "tput cnorm ; exit 1" SIGQUIT SIGINT EXIT
+res=`PATH="$PATH:/usr/sbin" fbset | grep geometry | sed 's/^ *//'`
+width=`echo "$res" | cut -d' ' -f2`
+height=`echo "$res" | cut -d' ' -f3`
+tput civis
+clear
+mplayer -vo mga -screenw "$width" -screenh "$height" "$@" >/dev/null 2>&1
--- a/rpm/mplayer.spec	Mon Jul 07 06:47:01 2008 +0000
+++ b/rpm/mplayer.spec	Mon Jul 07 09:30:22 2008 +0000
@@ -230,7 +230,7 @@
 rm -rf $RPM_BUILD_ROOT doc

 make install DESTDIR=$RPM_BUILD_ROOT STRIPBINARIES=no
-install -pm 755 TOOLS/midentify $RPM_BUILD_ROOT%{_bindir}/
+install -pm 755 TOOLS/midentify.sh $RPM_BUILD_ROOT%{_bindir}/

 # Clean up documentation
 mkdir doc
@@ -291,7 +291,7 @@
 %config(noreplace) %{_sysconfdir}/mplayer/mplayer.conf
 %config(noreplace) %{_sysconfdir}/mplayer/input.conf
 %config(noreplace) %{_sysconfdir}/mplayer/menu.conf
-%{_bindir}/midentify
+%{_bindir}/midentify.sh
 %{_bindir}/mplayer
 %dir %{codecsdir}/
 %dir %{_datadir}/mplayer/