annotate configure @ 129:4f6d9621ee00

add multi session streaming & add depending librarys. - libupnp-1.6.6 - libdlna-0.2.3

#!/bin/sh
#
# recpt1 configure script - (c) 2007 Benjamin Zores
#
#  (fully inspirated from ffmpeg configure script, thanks to Fabrice Bellard)
#

# make sure we are running under a compatible shell
unset foo
(: ${foo%%bar}) 2>/dev/null && ! (: ${foo?}) 2>/dev/null
if test "$?" != 0; then
    if test "x$USHARE_CONFIGURE_EXEC" = x; then
        USHARE_CONFIGURE_EXEC=1
        export USHARE_CONFIGURE_EXEC
        exec bash "$0" "$@"
        exec ksh "$0" "$@"
        exec /usr/xpg4/bin/sh "$0" "$@"
    fi
    echo "No compatible shell script interpreter found."
    exit 1
fi

show_help(){
  echo "Usage: configure [options]"
  echo "Options: [defaults in brackets after descriptions]"
  echo
  echo "Standard options:"
  echo "  --help                      print this message"
  echo "  --log[=FILE|yes|no]         log tests and output to FILE [config.log]"
  echo "  --prefix=PREFIX             install in PREFIX [$PREFIX]"
  echo "  --bindir=DIR                install binaries in DIR [PREFIX/bin]"
  echo "  --sysconfdir=DIR            configuration files DIR [PREFIX/etc]"
  echo "  --localedir=DIR             use locales from DIR [PREFIX/share/locale]"
  echo ""
  echo "Extended options:"
  echo "  --enable-dlna               enable DLNA support through libldna"
  echo "  --disable-dlna              disable DLNA support"
  echo "  --disable-nls               do not use Native Language Support"
  echo "  --enable-b25                enable b25 support"
  echo ""
  echo "Search paths:"
#  echo "  --with-libupnp-dir=DIR      check for libupnp installed in DIR"
#  echo "  --with-libdlna-dir=DIR      check for libdlna installed in DIR"
  echo "  --with-b25-dir=DIR          check for libarib25 installed in DIR"
  echo ""
  echo "Advanced options (experts only):"
  echo "  --enable-debug              enable debugging symbols"
  echo "  --disable-debug             disable debugging symbols"
  echo "  --disable-strip             disable stripping of executables at installation"
  echo "  --disable-optimize          disable compiler optimization"
  echo "  --cross-prefix=PREFIX       use PREFIX for compilation tools [$cross_prefix]"
  echo "  --cross-compile             assume a cross-compiler is used"
  exit 1
}

log(){
    echo "$@" >>$logfile
}

log_file(){
    log BEGIN $1
    cat -n $1 >>$logfile
    log END $1
}

echolog(){
    log "$@"
    echo "$@"
}

clean(){
    rm -f $TMPC $TMPO $TMPE $TMPS
}

die(){
    echolog "$@"
    if enabled logging; then
      echo "See file \"$logfile\" produced by configure for more details."
    else
      echo "Rerun configure with logging enabled (do not use --log=no) for more details."
    fi
    clean
    exit 1
}

enabled(){
    eval test "x\$$1" = "xyes"
}

flags_saved(){
    (: ${SAVE_CFLAGS?}) 2>/dev/null
}

save_flags(){
    flags_saved && return
    SAVE_CFLAGS="$CFLAGS"
    SAVE_LDFLAGS="$LDFLAGS"
    SAVE_extralibs="$extralibs"
}

restore_flags(){
    CFLAGS="$SAVE_CFLAGS"
    LDFLAGS="$SAVE_LDFLAGS"
    extralibs="$SAVE_extralibs"
    unset SAVE_CFLAGS
    unset SAVE_LDFLAGS
    unset SAVE_extralibs
}

temp_cflags(){
    temp_append CFLAGS "$@"
}

temp_ldflags(){
    temp_append LDFLAGS "$@"
}

temp_extralibs(){
    temp_append extralibs "$@"
}

temp_append(){
    local var
    var=$1
    shift
    save_flags
    append_var "$var" "$@"
}

append_var(){
    local var f
    var=$1
    shift
    for f in $@; do
      if eval echo \$$var | grep -qv -e "$f"; then
        eval "$var=\"\$$var $f\""
      fi
    done
}

append(){
    local var
    var=$1
    shift
    flags_saved && append_var "SAVE_$var" "$@"
    append_var "$var" "$@"
}

add_cflags(){
    append CFLAGS "$@"
}

add_ldflags(){
    append LDFLAGS "$@"
}

add_extralibs(){
    append extralibs "$@"
}

add_clog(){
    echo "#define $1 $2" >> $CONFIG_H
}

add_clog_str(){
    echo "#define $1 \"$2\"" >> $CONFIG_H
}

check_cmd(){
    log "$@"
    "$@" >>$logfile 2>&1
}

check_cc(){
    log check_cc "$@"
    cat >$TMPC
    log_file $TMPC
    check_cmd $cc $CFLAGS "$@" -c -o $TMPO $TMPC
}

check_cpp(){
    log check_cpp "$@"
    cat >$TMPC
    log_file $TMPC
    check_cmd $cc $CFLAGS "$@" -E -o $TMPO $TMPC
}

check_ld(){
    log check_ld "$@"
    check_cc || return
    check_cmd $cc $LDFLAGS "$@" -o $TMPE $TMPO $extralibs
}

check_exec(){
    check_ld "$@" && { enabled cross_compile || $TMPE >>$logfile 2>&1; }
}

check_cflags(){
    log check_cflags "$@"
    check_cc "$@" <<EOF && add_cflags "$@"
int x;
EOF
}

check_ldflags(){
    log check_ldflags "$@"
    check_ld "$@" <<EOF && add_ldflags "$@"
int main(){
    return 0;
}
EOF
}

check_header(){
    local header
    log check_header "$@"
    header=$1
    shift
    check_cpp "$@" <<EOF
#include <$header>
int x;
EOF
}

check_func(){
    local func
    log check_func "$@"
    func=$1
    shift
    check_ld "$@" <<EOF
extern int $func();
int main(){
    $func();
    return 0;
}
EOF
}

check_lib(){
    local header func err
    log check_lib "$@"
    header="$1"
    func="$2"
    shift 2
    temp_extralibs "$@"
    check_header $header && check_func $func && add_extralibs "$@"
    err=$?
    restore_flags
    return $err
}

check_lib_version() {
    check_cmd pkg-config "$1" --atleast-version="$2"
    err=$?
    return $err
}

append_config(){
    echo "$@" >> $CONFIGFILE
}

expand_var(){
    v="$1"
    while true; do
      eval t="$v"
      test "$t" = "$v" && break
      v="$t"
    done
    echo "$v"
}

# set temporary file name
if test ! -z "$TMPDIR" ; then
    TMPDIR1="${TMPDIR}"
elif test ! -z "$TEMPDIR" ; then
    TMPDIR1="${TEMPDIR}"
else
    TMPDIR1="/tmp"
fi

TMPC="${TMPDIR1}/recpt1-${RANDOM}-$$-${RANDOM}.c"
TMPO="${TMPDIR1}/recpt1-${RANDOM}-$$-${RANDOM}.o"
TMPE="${TMPDIR1}/recpt1-${RANDOM}-$$-${RANDOM}"
TMPS="${TMPDIR1}/recpt1-${RANDOM}-$$-${RANDOM}.S"

CONFIGFILE="config.mak"
CONFIG_H="config.h"

#################################################
#   set default parameters
#################################################
logging="yes"
logfile="config.log"
PREFIX="/usr/local"
bindir='${PREFIX}/bin'
sysconfdir='${PREFIX}/etc'
localedir='${PREFIX}/share/locale'
#dlna="no"
dlna="yes"
nls="yes"
b25="no"
cc="gcc"
make="make"
strip="strip"
cpu=`uname -m`
optimize="yes"
debug="no"
dostrip="yes"
extralibs=""
installstrip="-s"
cross_compile="no"
INSTALL="/usr/bin/install -c"
VERSION="1.1a"
system_name=`uname -s 2>&1`

######################################
# include libupnp & libdlna
######################################
libupnp=`pwd`/libupnp-1.6.6
libdlna=`pwd`/libdlna-0.2.3
libupnp_build=`pwd`/libupnp-1.6.6/BUILD
libdlna_build=`pwd`/libdlna-0.2.3/BUILD
libupnp_inc=`pwd`/libupnp-1.6.6/INCLUDE
libdlna_inc=`pwd`/libdlna-0.2.3/INCLUDE

sh -c "cd $libupnp && ./configure --prefix=$libupnp --libdir=$libupnp_build  --includedir=$libupnp_inc --disable-shared && make && make install && cd .." || die "$libupnp setup failed."
sh -c "cd $libdlna && ./configure --prefix=$libdlna --libdir=$libdlna_build  --includedir=$libdlna_inc --disable-shared && make && make install && cd .." || die "$libdlna setup failed."

add_cflags -I`pwd`
add_cflags -I`pwd`/src
add_cflags -I$libupnp_inc
add_cflags -I$libdlna_inc

add_ldflags $libupnp_build/libixml.a
add_ldflags $libupnp_build/libupnp.a
add_ldflags $libupnp_build/libthreadutil.a
add_ldflags $libdlna_build/libdlna.a
add_extralibs -lavformat
add_extralibs -lrt

#################################################
#   set cpu variable and specific cpu flags
#################################################
case "$cpu" in
  i386|i486|i586|i686|i86pc|BePC)
    cpu="x86"
  ;;
  x86_64|amd64)
    cpu="x86"
    canon_arch="`$cc -dumpmachine | sed -e 's,\([^-]*\)-.*,\1,'`"
    if [ x"$canon_arch" = x"x86_64" -o x"$canon_arch" = x"amd64" ]; then
      if [ -z "`echo $CFLAGS | grep -- -m32`"  ]; then
        cpu="x86_64"
      fi
    fi
  ;;
# armv4l is a subset of armv5tel
  arm|armv4l|armv5tel)
    cpu="armv4l"
  ;;
  alpha)
    cpu="alpha"
  ;;
  "Power Macintosh"|ppc|ppc64|powerpc)
    cpu="powerpc"
  ;;
  mips|mipsel|IP*)
    cpu="mips"
  ;;
  sun4u|sparc64)
    cpu="sparc64"
  ;;
  sparc)
    cpu="sparc"
  ;;
  sh4)
    cpu="sh4"
  ;;
  parisc|parisc64)
    cpu="parisc"
  ;;
  s390|s390x)
    cpu="s390"
  ;;
  m68k)
    cpu="m68k"
  ;;
  ia64)
    cpu="ia64"
  ;;
  bfin)
    cpu="bfin"
  ;;
  *)
    cpu="unknown"
  ;;
esac

# OS test booleans functions
issystem() {
  test "`echo $system_name | tr A-Z a-z`" = "`echo $1 | tr A-Z a-z`"
}

linux()   { issystem "Linux" || issystem "uClinux" ; return "$?" ; }
sunos()   { issystem "SunOS"   ; return "$?" ; }
hpux()    { issystem "HP-UX"   ; return "$?" ; }
irix()    { issystem "IRIX"    ; return "$?" ; }
aix()     { issystem "AIX"     ; return "$?" ; }
cygwin()  { issystem "CYGWIN"  ; return "$?" ; }
freebsd() { issystem "FreeBSD" || issystem "GNU/kFreeBSD"; return "$?" ; }
netbsd()  { issystem "NetBSD"  ; return "$?" ; }
bsdos()   { issystem "BSD/OS"  ; return "$?" ; }
openbsd() { issystem "OpenBSD" ; return "$?" ; }
bsd()     { freebsd || netbsd || bsdos || openbsd ; return "$?" ; }
qnx()     { issystem "QNX"     ; return "$?" ; }
darwin()  { issystem "Darwin"  ; return "$?" ; }
gnu()     { issystem "GNU"     ; return "$?" ; }
mingw32() { issystem "MINGW32" ; return "$?" ; }
morphos() { issystem "MorphOS" ; return "$?" ; }
amigaos() { issystem "AmigaOS" ; return "$?" ; }
win32()   { cygwin || mingw32  ; return "$?" ; }
beos()    { issystem "BEOS"    ; return "$?" ; }

#################################################
#   check options
#################################################
for opt do
  optval="${opt#*=}"
  case "$opt" in
  --log)
  ;;
  --log=*) logging="$optval"
  ;;
  --prefix=*) PREFIX="$optval"; force_prefix=yes
  ;;
  --bindir=*) bindir="$optval";
  ;;
  --sysconfdir=*) sysconfdir="$optval";
  ;;
  --localedir=*) localedir="$optval";
  ;;
#  --with-libupnp-dir=*) libupnpdir="$optval";
#  ;;
#  --with-libdlna-dir=*) libdlnadir="$optval";
#  ;;
  --with-b25-dir=*) libb25dir="$optval";
  ;;
  --disable-nls) nls="no"
  ;;
  --enable-dlna) dlna="yes"
  ;;
  --disable-dlna) dlna="no"
  ;;
  --enable-b25) b25="yes"
  ;;
  --disable-b25) b25="no"
  ;;
  --enable-debug) debug="yes"
  ;;
  --disable-debug) debug="no"
  ;;
  --disable-strip) dostrip="no"
  ;;
  --disable-optimize) optimize="no"
  ;;
  --cross-prefix=*) cross_prefix="$optval"
  ;;
  --cross-compile) cross_compile="yes"
  ;;
  --help) show_help
  ;;
  *)
  echo "Unknown option \"$opt\"."
  echo "See $0 --help for available options."
  exit 1
  ;;
  esac
done

if [ -n "$cross_prefix" ]; then
  cross_compile="yes"
  cc="${cross_prefix}${cc}"
  strip="${cross_prefix}${strip}"
else
  [ -n "$CC" ] && cc="$CC"
  [ -n "$STRIP" ] && strip="$STRIP"
fi
[ -n "$MAKE" ] && make="$MAKE"

#################################################
#   create logging file
#################################################
if test "$logging" != no; then
  enabled logging || logfile="$logging"
  echo "# $0 $@" >$logfile
  set >>$logfile
else
  logfile=/dev/null
fi

#################################################
#   compiler sanity check
#################################################
echolog "Checking for compiler available..."
check_exec <<EOF
int main(){
    return 0;
}
EOF
if test "$?" != 0; then
  echo "$cc is unable to create an executable file."
  if test -z "$cross_prefix" -a "$cross_compile" = no; then
    echo "If $cc is a cross-compiler, use the --cross-compile option."
  fi
  die "C compiler test failed."
fi

#################################################
#   check for target specific flags
#################################################
# check for SIMD availability

# AltiVec flags: The FSF version of GCC differs from the Apple version
if test $cpu = "powerpc"; then
  if test $altivec = "yes"; then
    if test -n "`$cc -v 2>&1 | grep version | grep Apple`"; then
      add_cflags "-faltivec"
    else
      add_cflags "-maltivec -mabi=altivec"
    fi
  fi
fi

check_header altivec.h && _altivec_h=yes || _altivec_h=no

# check if our compiler supports Motorola AltiVec C API
if enabled altivec; then
  if enabled _altivec_h; then
    inc_altivec_h="#include <altivec.h>"
  else
    inc_altivec_h=
  fi
  check_cc <<EOF || altivec=no
$inc_altivec_h
int main(void) {
    vector signed int v1, v2, v3;
    v1 = vec_add(v2,v3);
    return 0;
}
EOF
fi

# mmi only available on mips
if [ "$mmi" = "default" ]; then
  if [ "$cpu" = "mips" ]; then
    mmi="yes"
  else
    mmi="no"
  fi
fi

# check if our compiler supports mmi
enabled mmi && check_cc <<EOF || mmi="no"
int main(void) {
    __asm__ ("lq \$2, 0(\$2)");
    return 0;
}
EOF

# test gcc version to see if vector builtins can be used
# currently only used on i386 for MMX builtins
check_cc -msse <<EOF && builtin_vector=yes || builtin_vector=no
#include <xmmintrin.h>
int main(void) {
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 2)
return 0;
#else
#error no vector builtins
#endif
}
EOF

# test for mm3dnow.h
test "$cpu" = "x86_64" && march=k8 || march=athlon
check_cc -march=$march <<EOF && mm3dnow=yes || mm3dnow=no
#include <mm3dnow.h>
int main(void) {
__m64 b1;
b1 = _m_pswapd(b1);
_m_femms();
return 0;
}
EOF

# ---
# big/little-endian test
if test "$cross_compile" = "no"; then
  check_ld <<EOF || die "endian test failed" && $TMPE && bigendian="yes"
#include <inttypes.h>
int main(int argc, char ** argv){
        volatile uint32_t i=0x01234567;
        return (*((uint8_t*)(&i))) == 0x67;
}
EOF
else
# programs cannot be launched if cross compiling, so make a static guess
  if test "$cpu" = "powerpc" -o "$cpu" = "mips" ; then
    bigendian="yes"
  fi
fi

# add some useful compiler flags if supported
add_cflags -I..
add_cflags -I../driver
check_cflags -W
check_cflags -Wall
check_cflags -D_LARGEFILE_SOURCE
check_cflags -D_FILE_OFFSET_BITS=64
check_cflags -D_REENTRANT
linux && add_cflags -D_GNU_SOURCE

#################################################
#   check for debug symbols
#################################################
if enabled debug; then
  add_cflags -g3
  add_cflags -DHAVE_DEBUG
  dostrip=no
fi

if enabled optimize; then
  if test -n "`$cc -v 2>&1 | grep xlc`"; then
    add_cflags  "-O5"
    add_ldflags "-O5"
  else
    add_cflags "-O3"
  fi
fi

#################################################
#   check for locales (optional)
#################################################
echolog "Checking for locales ..."
check_header locale.h && add_cflags -DHAVE_LOCALE_H
check_lib locale.h setlocale "" && add_cflags -DHAVE_SETLOCALE

#################################################
#   check for ifaddr (optional)
#################################################
echolog "Checking for ifaddrs ..."
check_lib ifaddrs.h getifaddrs "" && add_cflags -DHAVE_IFADDRS_H

#################################################
#   check for langinfo (optional)
#################################################
echolog "Checking for langinfo ..."
check_header langinfo.h && add_cflags -DHAVE_LANGINFO_H
check_lib langinfo.h nl_langinfo "" && add_cflags -DHAVE_LANGINFO_CODESET

#################################################
#   check for iconv (optional)
#################################################
echolog "Checking for iconv ..."
check_lib iconv.h iconv "" && add_cflags -DHAVE_ICONV

##################################################
##   check for libupnp and friends (mandatory)
##################################################
#if [ -n "$libupnpdir" ]; then
#  check_cflags -I$libupnpdir/include
#  check_ldflags -L$libupnpdir/lib
#fi
#
#echolog "Checking for libixml ..."
#check_lib upnp/ixml.h ixmlRelaxParser -lixml || die "Error, can't find libixml !"
#
#echolog "Checking for libthreadutil ..."
#check_lib upnp/ThreadPool.h ThreadPoolAdd "-lthreadutil -lpthread" || die "Error, can't find libthreadutil !"
#add_extralibs -lpthread
#
#libupnp_min_version="1.4.2"
#echolog "Checking for libupnp >= $libupnp_min_version ..."
#check_lib upnp/upnp.h UpnpSetMaxContentLength -lupnp || die "Error, can't find libupnp !"
#check_lib_version libupnp $libupnp_min_version || die "Error, libupnp < $libupnp_min_version !"
#add_cflags `pkg-config libupnp --cflags`
#add_extralibs `pkg-config libupnp --libs`
#
##################################################
##   check for libdlna (mandatory if enabled)
##################################################
#if test "$dlna" = "yes"; then
#  libdlna_min_version="0.2.1"
#  echolog "Checking for libdlna >= $libdlna_min_version ..."
#  if [ -n "$libdlnadir" ]; then
#    check_cflags -I$libdlnadir/include
#    check_ldflags -L$libdlnadir/lib
#  fi
#  check_lib dlna.h dlna_register_all_media_profiles -ldlna || die "Error, can't find libdlna (install it or use --disable-dlna) !"
##  check_lib_version libdlna $libdlna_min_version || die "Error, libdlna < $libdlna_min_version !"
#  add_cflags -DHAVE_DLNA
#  add_cflags `pkg-config libdlna --cflags`
#  add_extralibs `pkg-config libdlna --libs`
#fi

#################################################
#   check for libarib25 (mandatory if enabled)
#################################################
if test "$b25" = "yes"; then
  b25_min_version="0.1.8"
  echolog "Checking for b25 >= $b25_min_version ..."
  if [ -n "$libb25dir" ]; then
    check_cflags -I$libb25dir/include/arib25
    check_ldflags -L$libb25dir/lib
  fi
  check_lib arib_std_b25.h create_arib_std_b25 -larib25 -lpcsclite || die "Error, can't find libarib25 (install it or use --disable-b25) !"
#  check_lib_version libarib25 $libb25_min_version || die "Error, libb25 < $libb25_min_version !"
  add_cflags -DHAVE_LIBARIB25
  add_cflags `pkg-config libarib25 pcsclite --cflags`
  add_extralibs `pkg-config libarib25 pcsclite --libs`
fi

# force use DLNA
add_cflags -DHAVE_DLNA

#################################################
#   logging result
#################################################
echolog ""
echolog "recpt1: configure is OK"
echolog "  version            $VERSION"
#echolog "  using libupnp      `pkg-config libupnp --modversion`"
#test $dlna = yes && echolog "  using libdlna      `pkg-config libdlna --modversion`"
test $b25 = yes && echolog "  using libb25      `pkg-config libb25 --modversion`"
echolog "configuration:"
echolog "  install prefix     $PREFIX"
echolog "  configuration dir  $sysconfdir"
echolog "  locales dir        $localedir"
echolog "  NLS support        $nls"
#echolog "  DLNA support       $dlna"
echolog "  B25 support        $b25"
echolog "  C compiler         $cc"
echolog "  STRIP              $strip"
echolog "  make               $make"
echolog "  CPU                $cpu ($tune)"
echolog "  debug symbols      $debug"
echolog "  strip symbols      $dostrip"
echolog "  optimize           $optimize"
echolog ""
echolog "  CFLAGS             $CFLAGS"
echolog "  LDFLAGS            $LDFLAGS"
echolog "  extralibs          $extralibs"
echolog ""

#################################################
#   save configs attributes
#################################################
echolog "Creating $CONFIGFILE ..."

echo "# Automatically generated by configure - do not modify!" > $CONFIGFILE

append_config "VERSION=$VERSION"

append_config "PREFIX=$PREFIX"
append_config "prefix=\$(DESTDIR)\$(PREFIX)"
append_config "bindir=\$(DESTDIR)$bindir"
append_config "sysconfdir=\$(DESTDIR)$sysconfdir"
append_config "localedir=\$(DESTDIR)$localedir"

append_config "MAKE=$make"
append_config "CC=$cc"
append_config "LN=ln"
if enabled dostrip; then
  append_config "STRIP=$strip"
  append_config "INSTALLSTRIP=$installstrip"
else
  append_config "STRIP=echo ignoring strip"
  append_config "INSTALLSTRIP="
fi
append_config "EXTRALIBS=$extralibs"

append_config "OPTFLAGS=$CFLAGS"
append_config "LDFLAGS=$LDFLAGS"
append_config "INSTALL=$INSTALL"

append_config "DEBUG=$debug"


echolog "Creating $CONFIG_H ..."
echo "/* Automatically generated by configure - do not modify! */" > $CONFIG_H
add_clog_str VERSION "$VERSION"
add_clog_str PACKAGE "recpt1"
add_clog_str PACKAGE_NAME "recpt1"
add_clog_str SYSCONFDIR `expand_var "${sysconfdir}"`
add_clog_str LOCALEDIR `expand_var "${localedir}"`
test $nls = yes && add_clog CONFIG_NLS 1

clean
exit 0